As Her
-
Upload
amitav-talukdar -
Category
Documents
-
view
220 -
download
0
Transcript of As Her
-
8/3/2019 As Her
1/8
::: Clear Solutions in Sample Preparation
HPA-SHigh Pressure Asher
-
8/3/2019 As Her
2/8
HPA-SAn ingenious concept
Anton Paar Pioneer and leading developer inthe field of sample preparation
Anton Paar has developed and produced samplepreparation instruments to the highest standards for over30 years.
In 1973, the introduction of the "VAO", the worlds firstautomatic wet decomposition device, marked the
beginning of a successful cooperation between Anton Paar GmbHand Prof. Gnter Knapp at the University of Technology in Graz.Since then, professional, high-performance instruments have beendeveloped for plasma ashing, oxygen combustion, high pressuredigestion and for microwave-supported decomposition.
-
8/3/2019 As Her
3/8
The principle
Wet chemical pressure decomposition has established itself as aversatile, high-performance method for sample preparation forelement determination using AAS, ICP-OES, ICP-MS orvoltammetry. It can be used for a variety of applications.
The basic principles of successful acid digestion were recognizedas early as 1865 by Carius: suitable reagents, high temperaturesand appropriate vessels.
The idea
The high pressure asher HPA-S according to Knapp is the logical,practical application of this concept. The HPA-S is not an "asher"like a muffle oven, it is the number one instrument for wetchemical sample preparation at high temperatures under highpressure.
The instrument
The samples and acids are placed in closed vessels inside apressure vessel. This pressure vessel is filled with nitrogen up to130 bar pressure and heated up to a maximum of 320 C using apreselected temperature program.
The surrounding nitrogen pressure compensates the reactionpressure which arises in the vessels and prevents the vesselsopening or bursting. After the reaction, the pressure vessel iscooled down, ventilated and the vessels can be removed without
pressure.
Anton Paar GmbH is ISO 9001 certified.Products such as the HPA-S HighPressure Asher are additionally verified indesign and monitored in production bynotified bodies, e.g. the German TVProduct Service.
Cert
ifie
dQua
lity
Sys
tem
Anto
nPa
arGraz-
AustriaCe
rtifica
te
No
.
Q1
00
11
180
13003
ISO
9001 certifie
d
-
8/3/2019 As Her
4/8
The best reaction vessels
Hermetically sealed, long-life reaction vessels made of
highly pure, resistant materials guarantee perfectdecomposition. Conversion kits with different vessel sizesallow the optimal adaptation to different tasks.
The vessels are sealed with robust lids using PTFE strips.The nitrogen in the autoclave ensures the complete seal.
Economic operation
Due to its simple operation and reliable results, the HPA-Shas established itself as an accurate reference and routineinstrument in hundreds of laboratories across the world.
The sample throughput, minimum amount of vesselcleaning required and low costs for wearing parts andreagents make the HPA-S an attractive choice from a
financial point of view.
Safety without compromise
The robust construction with multiple pressure relief
devices take the danger out of spontaneous reactions.Secure locks prevent operating errors. The TV GScertificate documents the high safety level of the HPA-S.
There are no compromises when it comes to analyticalsafety either: Complete decomposition without loss orcontamination form the basis for accurate analysis.
High quality pressure vessel
The pressure vessel is made of high-tensile, corrosion-resistant stainless steel and corresponds to international
norms. It is delivered with comprehensive test certificates.A bayonet lid and valves ensure rapid and easy operation.A built-in fan is used to achieve rapid cooling afterdecomposition.
High, constant temperature
The concentric, electric heating heats all the vessels in theheating block uniformly, independent of the size, numberand content.
The exact temperature regulation up to 320C is achievedusing a program controller and guarantees high,reproducible decomposition quality, even for difficultorganic samples. Process times can be as long asrequired.
HPA-SAttention to detail
The high pressure asher HPA-S unites scientificknowledge of modern trace analysis and thepractical aspects of daily routine work in thelaboratory. The perfect function and excellentanalytical performance are the result of many yearsof cooperation with leading experts, experiencedusers and highly competent engineers.
The HPA-S system provides maximum safety,comfort and an extensive range of accessories, allhelping to meet the requirements of modernlaboratories.
No Volume Material Sample weight
21 15 mL Quartz max. 0.2 g
7 50 mL Quartz max. 0.8g
5 90 mL Quartz max. 1.5g
6 20 mL Glassy carbon max. 0.2 g
-
8/3/2019 As Her
5/8
Features
Up to 320 C at 130 bar
Hermetically sealed vessels
Selection of vessels and accessories
Highest safety with TV GS certificate
pressure vessel
reaction vessels
maximum temperature
Technical data
Pressure vessel High-tensile stainless steel,volume: 1.5 L
Lid Quick seal with safety lock
Max. operating temperature 320 C
Operating pressure 130 bar / 1900 psi
Maximum pressure 180 bar / 2600 psi
Testing pressure 258 bar / 3740 psi
Power 1700 W at 230V 50 ... 60 Hz
Dimensions (WxDxH) 460 x 420 x 820 mm
Weight 45 kg
User support
The success of the HPA-S high pressure asher is due to its
high quality technology in combination with a high level ofservice. Anton Paar has an international sales networkoffering user support.
Our sales representatives provide rapid and competentsupport and qualified technical service. Our experiencedchemists develop and improve methods and are available forconsultations. They also carry out the installation procedureand provide training courses at Anton Paars applicationlaboratory and on-site.
-
8/3/2019 As Her
6/8
Foodstuffs
The HPA-S is well-established in this field because
complete mineralization gives precise results forelements such as Hg, As and Se even with fattysamples. The 90 mL quartz glass vessels allow largesample volumes.
Medical analysis
The small 15 mL vessels are ideal for microsamplesof a few mg which are decomposed in the lowestvolume of acid. This gives low reagent blanks andallows up to 21 samples to be handled at once.
Pharmaceutical analysis
The HPA-S is well-established for demandingapplications in this field due to its reproducibleresults and low systematic error. It is renowned forwork with low element concentrations, high purityrequirements and applications with compoundswhich are difficult to decompose.
Material research
The HPA-S is ideal for total decomposition, leaching
or gas phase decomposition of metals, alloys,plastics, construction materials, ceramics, etc. Theprecise temperature regulation is also useful forspecial applications such as aging and corrosiontests.
Environmental analysis
Here, the HPA-S is used as an alternative orcomplement to other methods, e.g. microwavedecomposition. Its strength lies in ultra-traceanalysis. The option of large volumes is
advantageous for inhomogeneous samples.
Voltammetric analysis
Samples decomposed by the HPA-S have a verylow residual carbon content. This makes them idealfor accurate AAS, ICS-OES and ICP-MS analysisand reliable voltammetric tests.
HPA-SReliability guaranteed
Sample preparation with the high pressureasher HPA-S is the basis for successful,correct analysis. The HPA-S method is aninternationally recognized referenceprocedure.
In many publications, the instrument isgiven as the standard for completedecomposition with the lowest systematicerrors. The HPA-S is therefore in operationas a high-performance routine instrument innumerous industrial, state and privatelaboratories.
-
8/3/2019 As Her
7/8
Geochemistry
As well as standard applications, there are manypublications documenting the determination ofplatinum group elements and rare-earth elementsafter high temperature leaching with the HPA-S.Even full decomposition with HF is possible inglassy carbon vessels.
Chemical industry
In research and development, production orquality assurance, the flexible use, rapidadaptation to different tasks and a comprehensive
collection of methods make the HPA-S the mostreliable problem-solver for organic and inorganicmatrices.
Petrochemistry
Even difficult to decompose raw oils, fuels,lubricants, coal and combustion residues can bedecomposed with standard programs at hightemperatures. The safe and economic operation isa recognized benefit of the HPA-S.
BenefitsDecompositionmethods
Highest decomposition quality
Lowest systematic error
Simple adaptation for different tasks
Comprehensive application support
Years of operating experience with the HPA-Smethod exists today as a comprehensivecollection of applications which is useful toevery user.
The decisive parameters are known for manysample materials: sample volume, vessel size,type and volume of the reagents andtemperature program. Some characteristictemperature profiles cover almost allapplications.
There are four standard programs stored in theinstrument and these can be adapted by the
user as required according to the givenguidelines.
-
8/3/2019 As Her
8/810/02 B25IP05A
Specificationssubject to change
without notice.
Fotos: Croce & Wir
Instruments for:Density & concentrationmeasurement
Rheometry and viscometry
Sample preparation
Colloid scienceMicrohardness testing
X-ray structure analysis
CO2 measurement
High-precision temperaturemeasurement
Anton Paar GmbHAnton-Paar-Str. 20
A-8054 GrazAustria - EuropeTel: +43 (0)316 257-0Fax: +43 (0)316 257-257E-mail: [email protected]: www.anton-paar.com
Certif
ied
Qua
lity
Sys
tem
Anto
nPa
arGra
z-Austria Certifica
teNo.Q
1
00
11
180
13003
I
SO
900
1 certified