Article instructions: Add logo and/or print · Page 2 Step 4 » Click Stamp Tool. » Select...
Transcript of Article instructions: Add logo and/or print · Page 2 Step 4 » Click Stamp Tool. » Select...
Page 1
Article instructions: Add logo and/or print
These instructions will help you customize Aflac Employee Toolkit articles by adding your company’s
logo. If you prefer to circulate or print the document without a logo, simply follow steps 1 (to remove
the placeholder text) and 5 (to print).
The following instructions apply to both Adobe Reader and Adobe Acrobat Pro software:
Step 1 » Open the Comment tab.
» Click the Text tool.
» Select the “INSERT LOGO HERE” text in the document and delete it.
» If a logo will not be inserted, skip to Step 5.
Step 3 » Click the Browse button to find the desired logo. Your logo should be a PDF or an .eps file.
» Select Standard Business Category and type a name for your logo.
» Click OK
Step 2 » In the Comment tab, select Stamp Tool.
» Select Custom Stamp.
» Select Create Custom Stamp.
Page 2
Step 4 » Click Stamp Tool.
» Select Standard Business.
» Locate and select your logo.
» Using your cursor, place your logo in the upper
left corner of the article and resize as desired.
» Save your file.
Step 5 » To print the document with your logo,
select Document and Stamps from the
Comments and Forms dropdown menu.
» If you are printing without a logo, select
Document from the Comments and Forms
dropdown menu.
» Select Print.