ART Controlador de Temperatura Multi-zona “M Series” M ... - INCOE · - Aislamiento de...
Transcript of ART Controlador de Temperatura Multi-zona “M Series” M ... - INCOE · - Aislamiento de...
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
NO
TES
NO
TES
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
M Series Multi-Zone Temperature ControllerSerie M – Regulador de Temperatura de zonas múltiples
Controlador de Temperatura Multi-zona “M Series”
© INCOE 04/2014, 01/2008, 06/2007, 2006
7.0
M Series Multi-Zone Temperature ControllerSerie M – Regulador de Temperatura de zonas múltiples
Controlador de Temperatura Multi-zona “M Series”
Performance Features
• Modularmultizonecontroller
• 4Cabinetssizesunlimitednumber of zones
• ContinousselftuningPID controlsoftware
• Operatorinterface
• BlueLCDinterfacedisplay- Displays up to 16 zones - Zoom capability (1, 2 or 4 zones)
• OptionaltouchscreenPC
• Poweroutputboards- 5 Amp 1000 watts and 16 amp - 3600 watts- Plug in power boards for easy
servicing
• TCinputboards- Optocouplers isolation 1500V - Accuracy 1/10 degree °C/°F- Plug in for easy servicing
• Blownfuseindicatorlights
• Softstart- Adjustable by time- Adjustable % output power- Adjustable degrees per min.
• 3Adjustableoutputmodes- Soft start- Phase angle control then zero
crossing- Zero-crossing control
Performance Features
• Definezonebyname- Manifold, nozzle- Group 1, Group 2 individual zone
• Displays- % of power on bar graph
• Moldsetupssavedinmemory- Up to 16 on board, or external unlimited
• 6Languages- English, French, German, Italian,
Portuguese, and Spanish
• Passwordprotection
• Synchronousheating- All zones follow the slowest heat
zone for even heating
• 2Setpoints- Automatic setpoints- Manual percent output
• Alarmoutput- Adjustable hi and lo- Display % of power- Thermocouple open or reversed
• Programmable- Boost time + individual - +/- value per zone- Slave of a zone to another zone
• Moldscanfeature- Current measurement- Initial analysis is performed below
80°C/176°F- Calculation of output power (wattage)- Heater resistance displayed (ohm)- Response time (in degree/min)
• Auxiliaryinput- Chiller water on mold- Others
• Supplyvoltage- 240V actual 3 phase 50hz/60hz - Optional transformers available
• Maximumpower- Depends on the circuit breaker
used on the cabinet●
• Cabinetclass- Class III according to EN 61010-1
standards
• Controllerclassed- EC 73/23 conforms to EN 61010
standards low voltage
• Thermocoupleclassed- EC 73/23 conforms to EN 61010-1
standards low voltage
Características de Performance
• Controladormulti-zonamodular
• 4tamanhosdegabinetescomnumero de zonas ilimitado
• SoftwareparacontrolePIDcontinuo
• Interfacecomoperador
• TelaLCDazul- Mostra ate 16 zonas- Função zoom (1, 2, ou 4 zonas)
• PCtouchscreenopcional
• Placasdesaídadepotencia- 5A (1000W) e - 16A (3600W)- Placas de saída de potencia tipo
“plug in” para facilitar manutenção
• Placadeentradadetermopar- Isolação para 1500V- Precisão de 1/10 °C/°F- Placas tipo “plug in” para facilidade
de manutenção
• Luzesindicadorasdefusívelqueimado
• ”SoftStart”- Ajustável por tempo- Ajustável por % de potencia de
saída- Ajustável em graus por minuto
• 3modosdesaídaajustáveis- Soft start- Controle de ângulo de fase e
depois de “Zero-crossing”- Controle “Zero-crossing”
© INCOE 04/2014, 01/2008, 06/2007, 2005, 2000, 1994
M
Características de Performance
• Definiçãodaszonas- Manifold, buchas- Grupo 1, grupo 2, zona individual
• Telas- % de potencia em gráfico de barra
• SetUpdemoldessalvosnamemória- Ate 16 moldes no próprio controlador,
ou ilimitado em PC externo
• 6línguas- Inglês, Francês, Alemão, Italiano,
Português e Espanhol
• Proteçãoporsenha
• Aquecimentosincronizado- Todas as zonas seguem a zona mais
lenta durante o aquecimento●
• 2temperaturaprogramadas- Controle automático- Controle manual de percentual de potencia
• Informaçãodealarmes- Limites máximos e mínimos ajustáveis- Tela de % de potencia- Termopar aberto ou invertido
• Programáveis- “Boost Time + valor de temperatura
individual por zona- Zonas “escravas” programáveis para
casos de problemas no termopar
• Opcional“Moldscan”- Medição de corrente- Analise inicial realizada abaixo de
80°C/176°F- Calculo de potencia (wattagem)- Medição da resistência (ohm)- Tempo de resposta (em graus/minuto)
• Entradasauxiliares- Refrigeração do molde- Outros
• Voltagemdeentrada- 240V trifásico 50/60hz- Transformadores opcionais disponíveis
• Potenciamáxima- Depende do disjuntor utilizado no
gabinete
• Classedegabinete- Classe III de acordo com padrões
EN61010-1
• Classificaçãodocontrolador- EC 73/23 conforme padrões para baixa
tensão EN 61010
• Classificaçãodetermopares- EC 73/23 conforme padrões para baixa
tensão EN 61010-1
Características Operativas
• Definelazonapornombre- Distribuidor, boquilla- Grupo 1, Grupo 2, zona individual
• Paneles- % de potencia en el gráfico de barra
• Configuracionesdelmoldeguardadosen la memoria- Hasta 16 a bordo, ó ilimitados si son
externos
• 6Idiomas- Inglés, Francés, Alemán, Italiano,
Portugués y Español
• Protecciónconcontraseña
• Calefacciónsincrónica- Todas las zonas siguen a la zona de
calefacción más lenta para calefacción pareja
• 2Puntosdeajuste- Puntos de ajuste automáticos- Salida porcentual manual
• Salidadealarma- Altas y bajas graduables- Muestra % de potencia- Termopar abierto o invertido
• Programable- Tiempo de refuerzo + individual- + / - valor por zona- Esclavo de una zona a otra zona
• CaracterísticadeescaneodeMolde- Medida actual- El análisis inicial se realiza por debajo de
80°C / 176°F - Cálculo de la potencia de salida (voltaje)- Resistencia del calefactor expuesta (ohm)- Tiempo de respuesta (en grados / min)
• Entradaauxiliar- Agua fría en el molde- Otros
• SuministreVoltaje- 240 V real, fase 3 50hz/60hz- Se encuentran disponibles
transformadores opcionales
• Máximapotencia- Depende del interruptor que se utiliza en
el gabinete
• ClasedeGabinete- Clase III, de acuerdo a los estándares
EN61010-1
• Reguladorclasificado -El EC 73/23 cumple con los estándares de bajo voltaje EN 61010
• Termoparclasificado- El EC 73/23 cumple con los estándares
de bajo voltaje EN 61010-1
Características Operativas
• Reguladormodulardezonasmúltiples
• 4tamañosdegabinetes,númeroilimitado de zonas
• SoftwaredecontrolPIDconautosintonizacióncontinua
• Interfazdeloperador
• PaneldeInterfazLCDazul - Muestra hasta 16 zonas - Capacidad de acercamiento (1, 2 ó 4 zonas)
•PCconpantallaopcional,operadaaltacto
• Tablerosdesalidadepotencia- 5 Amp 1000 vatios y 16 amp- 3600 vatios- Tableros de potencia enchufables para
fácil mantenimiento
• Tablerosdeentradadetermopar- Aislamiento de Optoacopladores 1500V- Precisión de 1/10 grados °C/°F- Enchufe para fácil mantenimiento
• Lucesindicadorasdefusiblesfundidos
• Arranquesuave- Graduable por tiempo- % de potencia de salida graduable- Grados por min. graduables
• 3Modosdesalidagraduables- Arranque suave- Control de ángulo de fase – cruce cero- Control de cruce - cero
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
NO
TES
NO
TES
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
Temperature ControlControlador de TemperaturaControlador de Temperatura
© INCOE 04/2014, 01/2008, 06/2007, 2006
7.3
Features
• Automatic/ManualModeofOperation
• UserSelectable- Temperature Settings- Output %
• TemperatureRange- 86 - 752°F (30 - 400° C)
• SoftStart- Adjustable 0 - 30 min. , 0 - 50%
• AlternateTemperatureSettings- Standby Mode- Boost Mode
• ThermocoupleBreakProtection- Automatic transfer from
Auto to Manual- Mode Display “tCoP”- User select
• ReversedThermocouple- No output to heater- Displays “tCrE”
• ControlAccuracy- ±0.5°F (±0.3°C)
• HeaterelementFault- Displays “HtoP”- Automatic
• InputVoltage- 90-250 VAC 50/60Hz
• PowerCapability- 15 Amps 3600 Watts @ 240 VAC
Single Phase
• OverloadProtection- Line Fuses
• LoadProtection- Built in if Triac Shorts
Features Continued
• ControllerDisplays- Dual bright L.E.D.- One Red One Green
• TemperatureIndication- The upper Red 7 segments display
• Setpoint,Alarm.Messageindications- The lower Green 7 segment display
•Controls- Easy to use
• Indicators- For Manual and Soft Start Modes
• Heatingindication- Indicator in the display will flash the
output level
• HeaterOutputPercentage- Displayed in Lower Display
• CurrentDisplay- Displays Amps in the Lower Display
• ContinuousAuto-TuningSoftware
• UserAdjust- Alarms- High And Low
• Useradjust- Set Point Limits
• HeaterMonitoringandAlarm.- Detects if current changes.
Características (continuação)
• Proteçãodecorrente- “Built in” em caso de falha do triac
• Telasdocontrolador- LED de duas cores- Uma tela vermelha e uma verde
• Indicaçãodetemperatura- Tela superior de 7 segmentos vermelha
• Setpoint,mensagensdeindicaçãodealarmes- Tela inferior de 7 segmentos verde
• Controles- Botão único de fácil acesso “Click and
Rotate” (gire e pressione)
• Indicadores- Para modos manual e soft start
• Indicaçãodeaquecimento- Indicador da tela pisca indicando o nível
de saída
• Percentualdepotenciadaresistência- Mostrado na tela inferior
• Teladecorrente- Mostra amperagem na tela inferior
• IndicaçãodePotencia- Mostrando em Watts ou KW na tela
inferior
• Softwaredecontrolecontinuo
• Ajustávelpelousuário- Alarmes- Desvio Maximo superior e inferior
• Correçãodevoltagem- Mantém voltagem de saída em caso de
flutuação da voltagem (Patente INCOE no. 6, 107, 610)
• Ajustávelpelousuário- Limites de set point (temperatura de
processo)
• Sistemaantiarco- Permite remoção segura de módulos do
controlador
• Selecionavelpelousuário- Função de trava- Como o controlador e iniciado ou
reiniciado quando e aplicada potencia
• Monitoramentoderesistênciaealarme- Detecta se a potencia da resistência
muda
Características
• MododeoperaçãoAutomático/Manual
• Selecionavelpelousuário- Regulagens de temperatura- termopares isolados ou aterrados
• Faixadetemperatura- 86 a 752°F (30 a 400° C)
• SoftStart(1)- Ajustável 0 a 30 min. , 0 a 50%
• SoftStart(2)- Rampa ajustável pelo usuário em graus/
minuto
• Proteçãoparafalhadotermopar- Transferência automática do modo
automático para manual- Tela inferior indica “tCoP”- Selecionavel pelo usuário
• Termoparinvertido- Não há saida para resistência- Tela indica “tCrE”
• Precisãodocontrolador- ±0.5°F (±0.3°C)
• Falhanofilamentodaresistência- Tela indica “HtoP”Compensação de junta fria- Automático
• Compensaçãodejuntafria- Automático
• Voltagemdetrabalho- 90-250 VAC 50/60Hz
• Capacidadedepotencia- 15A 3600W em 240VAC monofásico
• Proteçãoparasobrecarga - Fusíveis de linha
© INCOE 04/2014, 01/2008, 06/2007, 2005, 2000, 1994
Características – Continuación
• ProteccióndeCarga- Incorporado si el Triac queda corto
• PanelesdelRegulador- Dobles Paneles LED brillantes- Uno Rojo Uno Verde
• IndicadordeTemperatura- El panel rojo superior con 7 segmentos
• Puntodeajuste,Alarma.Indicadordemensajes- El panel verde inferior con 7 segmentos
• Controles- Botón único, fácil de usar, para “apretar
y girar”
• Indicadores- Para Modos de Arranque Suaves y
Manuales
• IndicadordeCalefacción- Indicador en el panel proyectará el nivel
de salida
• PorcentajedeSalidadelaResistencia- Expuesto en el panel Inferior
• PanelActual- Muestra Amps en el panel inferior
• IndicadordePotencia- Expuesto en Vatios ó kW en el panel
inferior
• SoftwareparaAutoSintonizacióncontinua
• Graduableporelusuario- Alarmas- Alta y Baja
• Correccióndevoltaje- Mantiene el voltaje de salida cuando el
voltaje lineal fluctúa (patente de INCOE no. 6,107, 610)
• Graduableporelusuario- Límites de punto de ajuste
• SistemaAntiArco- Permite el retiro seguro del regulador
• Elusuarioselecciona- Función de bloqueo del regulador- Cómo se inicia ó reinicia el regulador
cuando se aplica la potencia
• MonitoreoyAlarmadelaResistencia- Detecta si el voltaje cambia
Características
• MododeOperaciónAutomático/Manual
• Seleccionableporelusuario- Ajustes de Temperatura- Rectificado o sin rectificar
• RangodeTemperatura- De 86 a 752°F ( De 30 a 400° C)
• Arranquesuave(1)- Ajustable 0 a 30 minutos. , 0 a 50%
• Arranquesuave(2)- Índice de Rampa graduable por el
usuario en grados por minuto
• ProteccióndeRupturadeTermopar- Transferencia automática de Automático
a Manuall- Panel de Modalidad “tCoP”- El usuario selecciona
• TermoparInvertido- No hay salida al calefactor- Muestra “tCrE”
• ExactituddeControl- ±0.5°F (±0.3°C)
• FalladelElementodelaResistencia- Muestra “HtoP”- Compensación de unión en frío- Automático
• Compensacióndeuniónenfrío- Automático
• VoltajedeEntrada- 90-250 VAC 50/60Hz
• CapacidaddePotencia- 15 Amps 3600 Vatios a 240 VAC Fase
única
• ProteccióndeSobrecarga- Fusibles de línea-
Temperature ControlControl de Temperatura
Controle de Temperatura
I-Series Model IC-15A
7.3.0
© INCOE 04/2014
Temperature ControlControl de Temperatura
Controle de Temperatura
I-Series Model IC-15A
1 2
3
4
5 6
8
7
10 11
9
12
13
14
15
Module Interface Interface Features
1 SOFT LED Indicates module in Soft Start phase
2 OUT LED Indicates power output from module
3 PV Display Displays Present Value (PV) of measured temperature (red four digit display)
4 SV Display Displays Set Value (SV) for temperature(green four digit display)
5 AUTO LED Indicates module in Automatic Operation
6 MAN/BST LED Blink - Indicates module in Manual OperationON - Indicates module utilizing Boost feature
7 STANDBY LED Indicates module utilizing Standby feature
8 Value increase button
9 Value decrease button
10 MODE MODE button
11 SET SET button
12 SEL SEL button
13 Handle
14 On/Off Switch
15 Lock Pin
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
NO
TES
NO
TES
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
7.3.1
© INCOE 04/2014, 01/2008, 04/2004, 2003.
Single Phase • Fase única • Monofásico **Optional • Opcional • Opcional Enclosures can be wired to accommodate different voltages 240 VAC single phase or 240 VAC 3 phase, 380-415 VAC, 50/60 Hz. From the factory or in the field. See the diagram on the back of the enclosure.
Multi-Zone Enclosure Specifications Especificaciones de gabinetes de múltiples zonas
Especificações do Gabinete Multi zona
Catalog Number
Maximum Amperage
Volts 3 Phase
Max. No. Zones
Mold Cable Power & T/C
Cables Required
Height Inches
Width Inches
Depth Inches
Número de catálogo
Amperaje máximo Voltios 3 Fase Número Máximo
de ZonasCable de Potencia del
Molde y TermoparSe requieren
cablesAltura
PulgadasAncho
PulgadasProfundidad
Pulgadas
Numero de Catalogo
Amperagem máxima Trifásico Numero Maximo
de zonasCabo para
molde Potencia e Termopar
Cabos requeridos
Altura em polegadas
Largura em polegadas
Profundidade em polegadas
PC-1 15 *See Below 240 VAC 1 **See Below
604G-ACA 1 9.00 7.20 10.00
PC-1M 15 *See Below 240 VAC 1 **See Below
604G-ACA 1 8.50 4.625 10.00
PC-2 30 *See Below 240 VAC 2 **See Below
604G-ACA 2 9.00 7.20 10.00
PC-2M 30 *See Below 240 VAC 2 **See Below
604G-ACA 2 8.50 6.70 10.00
PC-4 50 240 VAC 4 1614CA-15’ or 1614CA-20’ 1 9.00 14.75 11.50
PC-6 50 240 VAC 6 3214CA-15’ or 3214CA-20’ 1 9.00 18.75 11.50
PC-8 50 240 VAC 8 3214CA-15’ or 3214CA-20’ 1 9.00 22.75 11.50
PC-12 70 240 VAC 12 4814CA-15’ or 4814CA-20’ 1 9.00 30.75 11.50
PC-16 70 240 VAC 16 3214CA-15’ or 3214CA-20’ 2 18.00 22.75 11.50
PC-20 70 240 VAC 20 3214CA-15’or 20’ 4814CA-15’or 20’
1 1 18.00 30.75 11.50
PC-24 70 240 VAC 24 4814CA-15’ or 4814CA-20’ 2 18.00 30.75 11.50
PC-32 100 240 VAC 323214CA-15’ or
20’ 4814CA-15’or 20’
1 2 27.00 30.75 11.50
PC-40 100 240 VAC 40 3214CA-15’or 20’ 4814CA-15’or 20’
2 2 36.00 30.75 11.50
PC-48 100 240 VAC 48 4814CA-15’ or 4814CA-20’ 4 36.00 30.75 11.50
NOTA• Cadagabinetetieneunventilador• Losenchufesestánlocalizadosenellado
izquierdo del gabinete• LaPotenciadeentradaestálocalizadaenel
lado derecho del gabinete• Losgabinetesseencuentrandisponibles
en 120VAC. Esto se debe especificar al momento de hacer el pedido
• Tambiénseencuentradisponiblelaopciónmagnética
NOTE
•Each enclosure has a cooling fan
•Plugs are located on the left side of the enclosure
•Input power is located on the right side of the enclosure
•Enclosures are available in 120VAC. This must be specified when ordering
• Magneticoptionalsoavailable
Features (continued)
• Floorstandshaverobust,5”diameterlocking (2) wheels for easy mobility.
• Overalldimensionsare:37”wide,28”deep,71”high.
• Maximumstandenclosurecapacityis30.75”wide,11.5”deep,36”high.
Características (continuação)
• Suportessãorobustos,comrodasdiâmetrode5”(2)comtravas.
• Dimensõesexternassão:37”delargura,28”deprofundidade,71”dealtura.
• Capacidademáximadogabinete30,75”delargura,11,5”deprofundidade,36”dealtura.
Características (Continuación)
• Lossoportesdepisotienen(2)ruedasbloqueablesrobustasde5”dediámetro, para movimiento fácil.
• Lasdimensionestotalesson:37”deancho,28”deprofundidad,71”dealtura.
• LacapacidadmáximadelSoportedelgabinetees30.75”deancho,11.5”deprofundidad,36”dealtura.
NOTA
•Cadagabinetetemumventiladorpararefrigeração
•Conectores localizados do lado esquerdo do gabinete
•Cabo de forca localizado do lado direito do gabinete
•Gabinetes disponíveis em 120VAC.Configuraçãosobencomendaedeveserespecificado no pedido
• Fixaçãomagnéticadisponível
Temperature ControlControl de Temperatura
Controle de Temperatura
I-Series Model IC-15A
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
NO
TES
NO
TES
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
7.3.2
© INCOE 04/2014, 01/2008, 04/2004, 2003.
1614-BPA Mold Wiring Diagram
Diagrama de cableado de Molde 1614-BPA
Diagramadeligaçãodemolde1614-BPA
3214-BPA Mold Wiring Diagram
Diagrama de cableado de Molde 3214-BPA
Diagramadeligaçãodemolde3214-BPA
4814-BPA Mold Wiring Diagram
Diagrama de cableado de Molde 4814-BPA
Diagramadeligaçãodemolde4814-BPA
32 M-BPA Mold Wiring Diagram
Diagrama de cableado de Molde 32 M-BPA
Diagramadeligaçãodemolde32M-BPA
Standard Mold Plug MountingsMontajes estándar para enchufes de molde
Montagempadrãoparaconectoresdemolde
I-Series or MICROCOM®
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
NO
TES
NO
TES
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
7.3.3
© INCOE 04/2014, 01/2008, 04/2004, 2003.
MOUNTING DIMENSIONSDIMENSIONES DE MONTAJEDIMENSOES DE MONTAGEM
MOUNTING DIMENSIONSDIMENSIONES DE MONTAJEDIMENSOES DE MONTAGEM
Base Plug Clearance for 1614-BPA & 4814-BPADespeje De Enchufe Base Para 1614- BPA Y 4814 – BPA
Caixa de tomadas para 1614-BPA & 4814-BPA
Base Plug Clearance for 3214-BPADespeje De Enchufe Base Para 3214- BPA
Caixa de tomadas para 3214-BPA
MOUNTING DIMENSIONSDIMENSIONES DE MONTAJEDIMENSOES DE MONTAGEM
Base Plug Clearance for 32 M-BPADespeje De Enchufe Base Para 32 M- BPA
Caixa de tomadas para 32 M-BPA
Standard Mold MountingsMontajes de Molde estándarMontagensdemoldepadrão
I-Series or MICROCOM®
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
NO
TES
NO
TES
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
7.3.4
Temperature Control Cable Assemblies Montajes de cable para control de temperatura
Montagem de cabos para controle de temperatura
Cables & Mold Plug Boxes Cajas de Cables y enchufes de moldeCabos e Caixas de tomadas de molde
© INCOE 04/2014, 01/2008, 04/2004, 2003.
I-Series, M Series or MICROCOM®
JB601. Mold Plug Box.
JB602. Mold Plug Box.
604-ACA Mold Cable for power and thermocouple control. 10’ long with optional P15405DB Mold Plug. This cable will allow one zone power and thermocouple, 15 amp maximum, and is used on the PC-1 and PC-2.
1614-CA. Mold Cable for power and thermocouple control. 15’ or 20’ long with 1614-BPA Mold Mounted Connector. Up to 4 Zones.
3214-CA. Mold Cable for power and thermocouple control. 15’ or 20’ long with 3214-BPA Mold Mounted Connector. Up to 8 Zones.
4814-CA. Mold Cable for power and thermocouple control. 15’ or 20’ long with 4814-BPA Mold Mounted Connector. Up to 12 Zones.
32“M”SeriesMoldCable for power and thermocouple control. 15’ or 20’ with 32 “M”MoldMountedConnector. Up to 8 Zones.
Caboparamolde32“M”Series para potencia e termopar. Comprimento de 15’ ou 20’ (4,5 ou 6m) montado com conectores 32“M”.Ate8zonas.
JB601 Caixa de tomadas de molde
JB602 Caixa de tomadas de molde
604-ACA Cabo para molde para potencia e termopar. Comprimento de 10’ (3m) com conector opcional P15405DB. Este cabo permite potencia e termopar com Maximo de 15 A por zona e usado no modelo PC-01 e PC-02.
1614-CA Cabo para molde para potencia e termopar. Comprimento de15’ ou 20’ (4,5 ou 6m) montado com conectores 1614-BPA. Ate 4 zonas.
3214-CA. Cabo para molde para potencia e termopar. Comprimento de 15’ ou 20’ (4,5 ou 6m) montado com conectores 3214-BPA. Ate 8 zonas.
4814-CA. Cabo para molde para potencia e termopar. Comprimento de 15’ ou 20’ (4,5 ou 6m) montado com conectores 4814-BPA. Ate 12 zonas
Serie32“M”decablesde Molde para control de potencia y termopar. Tiene una longitud de 15’ó20’conunconector32“M”montadoenelmolde. Tiene hasta 8 Zonas.
Caja de enchufes de Molde JB601
Caja de enchufes de Molde JB602
Cable de Molde 604-ACA para control de potencia y de termopar. Tiene 10’ de largo, con enchufe opcional de molde P15405DB. Este cable proporcionará potencia y termopar en una zona, 15 amp máximo, y se utiliza en el PC-1 y PC-2.
Cable de Molde 1614-CA para control de potencia y termopar. Tiene una longitudde15’ó20’,con Conector 1614-BPA montado en el Molde. Tiene hasta 4 zonas.
Cable de Molde 3214-CA para control de potencia y termopar. Tiene unalongitudde15’ó20’, con un conector 3214-BPA montado en el molde. Tiene hasta 8 Zonas.
Cable de Molde 4814-CA para control de potencia y termopar. Tiene unalongitudde15’ó20’, con un conector 4814-BPA montado en el molde. Tiene hasta 12 Zonas.
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
NO
TES
NO
TES
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
7.5
Gate Sequence ControlControlSecuencialdePuntosdeInyección
ControladordeInjeçãoSeqüencial
Benefits
• HydraulicorPneumaticoperation• ValveGateoperationbyCavityPressure,
Volume, Time or Temperature• WeldLinePositioningor
Elimination• ConsistentPartWeightinFamily
Molds• ClampForceReduction• ReduceWarporFlashfrom
Over-packing• SuperiorSurfaceQualityfor
In-Mold Decorating• Simpleinterfacewithallinjection
Machines independent display
© INCOE 04/2014, 01/2008, 06/2007, 2005, 2000, 1994
Features
• Operatorinterface• FlatScreenColorMonitor• StandardKeyboard&Mouse• GraphsAnalogandDigital
Functions• UnlimitedFileStorage• MeasuresandDisplaysScrew
Velocity, Volume, and Hydraulic Pressure
• LinearEncoder(screwposition) recalibration after each cycle
• LanguagesSelection *Consult INCOE®
Technical Data
•SupplyVoltage120VACFused2.5 amps•InjectionMoldingMachine required i/o Injection Forward, Screw Rotate, Mold Clamped, and Manual Mode•PCControlled;QNXOperating System•EthernetPort•Modem•Com3UsedByModem•Com4SerialPortConnection
GSC2
with
eDART™ ControlArchitecture
Benefícios
• OperaçãoHidráulicaouPneumática• Operaçãodosistemavalvuladopor
pressãodacavidade,Volume,Tempoou temperatura
• Posicionamentooueliminaçãodelinhas de emenda fria
• Pesoconsistentedepecasemmoldefamília
• Reduçãodaforcadefechamento• Reduçãodeempenamentoourebarbas
porexcessodecompactação• Qualidadedesuperfíciesuperiorpara
“in-MoldDecorating”(decoraçãodemolde em maquina)
• InterfacesimplescomtodasasMaquinasInjetoras, independente do comando
Características
• Interfacedooperador• Monitorplanocolorido• Tecladoemousepadrão• Funçõesgráficasanalógicasedigitais• Armazenamentoilimitadodearquivos• MedeemostraVelocidadedarosca,
Volumeepressãohidráulica
• Calibraçãodoencoderlinear(posiçãoda rosca) a cada ciclo
• Seleçãodelínguas *Consultar INCOE®
Informações Técnicas
• Voltagemdeoperação120VACcomfusível de 2.5A
• Interfacei/orequeridanamaquinainjetoraparaIniciodainjeção,Rotaçãoda rosca, travamento do molde e modo manual
• ControladoporPCcomsistemaoperacionalQNX
• EntradaEthernet• Modem• PortaCOM3usadaparaomodem• PortaserialCOM4
Beneficios
• OperaciónHidráulicaoNeumática• OperacióndeInsertodeVálvula
porPresión,Volumen,TiempoóTemperatura de Cavidad
• PosicionamientoóEliminacióndelínea de soldadura
• PesoconsistentedepiezasenMoldesFamiliares
• ReduccióndelaFuerzadeSujetadores• Reducedeformacionesórebabasdel
sobre empaque• CalidadSuperiordeSuperficiepara
Decoraciónenelmolde• Interfazsimpleconelpanel
independiente de todas las máquinas deinyección
Caracteristicas
• InterfazdelOperador• Monitoracolordepantallaplana• TecladoestándaryMouse• GráficosdeFuncionesAnálogasy
Digitales• AlmacenajeilimitadodeArchivos• Mideymuestralavelocidad,el
volumenylapresiónhidráulicadeltornillo
•RecalibracióndeCodificadoresLineales(posicióndetornillo)luegode cada ciclo
• SeleccióndeIdioma *Consulte con INCOE®
Datos Técnicos
•Suministrevoltaje120VACFusionado2.5 amps
•SerequiereMáquinadeMoldeoporInyección.Porejemplo,Inyeccióndelantera,rotacióndetornillo,MoldeSujetado y Modo Manual
•ControladoporPC;SistemadeOperaciónQNX
•PuertodeEthernet•Módem•Com3UtilizadoporMódem•Com4ConexiónaPuertoSerial
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
COLOUR MAY NOT REPRODUCE AS SHOWN. The above colour is specified for this project and may not reproduce exactly on various equipment. If printing 4 colours spot colours will be converted to process. Questions? contact us at www.creativitygoesbang.com
Cyan Magenta Yellow Black ________ _________ _________ ________
CO
LOU
RS
PRO
CES
S
SPO
T
NO
TES
NO
TES
NO
TES
NO
TES
THIS IS NOT FINAL ART. This project is classed as in production. Content is subject to change. Images and content are FOR POSITION ONLY. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROO
F OF
CO
NC
EPT
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur. Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
PROD
UC
TION
A
RT
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again
BEFORE APPROVING, PLEASE CHECK CAREFULLY! Although every effort has been made to produce the finest possible artwork, errors may occur.Content may be Confidential and subject to © Copyright BANG! creative communications a division of DOC creative inc. www.creativitygoesbang.com
FINA
L ART
Project #: Client: Date: Project:Revision #: File Name:
SIGNATURE FOR APPROVALName: ________________________________ Date:______________
Name: ________________________________ Date:______________
j BANG ON! j Good with changes j Need to see again