ART 35 - Ammann...ART 35 0.14 m (5.51 in) 0.12 m (4.72 in) – – 0.10 m (3.94 in) 0.06 m (2.36 in)...
2
ART 35 LIGHT PNEU TYRED ROLLER Tier 4i MAXIMUM RECOMMENDED COMPACTED LIFT THICKNESS AT OPTIMAL WORKING CONDITIONS Sand / gravel Mixed soils Silt Clay Stabilisation Asphalt ART 35 0.14 m (5.51 in) 0.12 m (4.72 in) – – 0.10 m (3.94 in) 0.06 m (2.36 in) A COMPACT SOLUTION The Ammann ART 35 Pneu Tyred Roller provides the benefits of both rigid frame and pneumatic compactors in a single, compact machine. The size of the roller and pivot-steering makes it a good fit on jobsites with tight and limited space. The pneumatic tyres make it productive on diverse materials, particularly those that require a “kneading” effect to aid compaction and the sealing of asphalt surfaces. APPLICATIONS • Small and medium compaction works • Road construction (building local roads, cycle paths, pavements, parking areas and garage driveways) • Building industry (small industrial areas) • Chip and spray PRODUCTIVITY Pivot steering High manoeuvrability on jobsite with synchronized axle steering Machine design Compact machine design for high stability, manoeuvrability and service access Sprinkling system 3-stage filtration system with large water tanks for extended intervals between fillings ERGONOMICS Operator platform design Spacious operator platform with slideable seat Simple and reliable dashboard Intuitive machine control, even with an unskilled operator Visibility Perfect all-around machine visibility for safety on the jobsite SERVICEABILITY Design that enables daily maintenance Easy and fast daily maintenance Accessible service and maintenance points Machine serviced from ground, enabling comfort Machine simplicity Reduced service points
Transcript of ART 35 - Ammann...ART 35 0.14 m (5.51 in) 0.12 m (4.72 in) – – 0.10 m (3.94 in) 0.06 m (2.36 in)...
ART 35LIGHT PNEU TYRED ROLLERTier 4i
MAXIMUM RECOMMENDED COMPACTED LIFT THICKNESS AT OPTIMAL WORKING CONDITIONS
Sand / gravel Mixed soils Silt Clay Stabilisation Asphalt
ART 35 0.14 m (5.51 in) 0.12 m (4.72 in) – – 0.10 m (3.94 in) 0.06 m (2.36 in)
A COMPACT SOLUTIONThe Ammann ART 35 Pneu Tyred Roller provides the benefits of both rigid frame and pneumatic compactors in a single, compact machine. The size of the roller and pivot-steering makes it a good fit on jobsites with tight and limited space. The pneumatic tyres make it productive on diverse materials, particularly those that require a “kneading” effect to aid compaction and the sealing of asphalt surfaces.
APPLICATIONS• Small and medium
compaction works
• Road construction (building local roads, cycle paths, pavements, parking areas and garage driveways)
• Building industry (small industrial areas)
• Chip and spray
PRODUCTIVITYPivot steering High manoeuvrability on jobsite with synchronized axle steering
Machine design Compact machine design for high stability, manoeuvrability and service access
Sprinkling system 3-stage filtration system with large water tanks for extended intervals between fillings
ERGONOMICSOperator platform design Spacious operator platform with slideable seat
Simple and reliable dashboard Intuitive machine control, even with an unskilled operator
Visibility Perfect all-around machine visibility for safety on the jobsite
SERVICEABILITYDesign that enables daily maintenance Easy and fast daily maintenance
Accessible service and maintenance points Machine serviced from ground, enabling comfort
Machine simplicity Reduced service points
C
D
B
I
A
G
E
H
TECHNICAL SPECIFICATIONS ART 35 PNEU TYRED ROLLER Tier 4i
ENGINE
MANUFACTURER Deutz D2011 L03i
POWER ACCORDING TO ISO 14396 33.2 kW (44,5 HP)
MAXIMUM TORQUE 137 Nm(101 ft lb)/1700 rpm
ENGINE COMPLIES WITH EMISSION REGULATIONS
EU Stage IIIA, U.S. EPA Tier 4 Interim
MISCELLANEOUS
BRAKES OPERATING Hydrostatic
BRAKES PARKING Mechanical gear
BRAKES EMERGENCY Mechanical gear
FUEL TANK CAPACITY 82 l (21,7 gal)
VOLTAGE 12 V
WEIGHT & DRIVING CHARACTERISTIC
OPERATING WEIGHT CECE 3200 kg (7050 Ib)
MAX. WORKING SPEED 14 km/h (8.7 MPH)
GRADEABILITY 30 %
TURNING DIAMETER INNER 2020 mm (79.5 in)
TURNING DIAMETER OUTER 3670 mm (144.5 in)
NUMBER OF WHEELS ON EACH AXLE 4
NUMBER OF WHEELS TOTAL 8
TIRES DIMENSION 10.5/80-16 6PR TL
NUMBER OF DRIVEN WHEELS 4
For additional product information and services please visit : www.ammann - group.com
Specifications are subject to change. MSS-1409-01-EN | © Ammann Group
STANDARD• CE conformity with folding ROPS
• Two drive levers
• Sliding driver’s seat
• Working lights
• Interval water sprinkling system
• Foldable scrapers
OPTIONAL EQUIPMENT• Back-up alarm
• Warning beacon
• Slow moving vehicle (SMV) sign
• Tool kit
• Customer colour
• Fire extinguisher
• Bio degradable oil
• Emulsion springling
• Filters for the first 500 h
• Filters for the first 1000 h
DIMENSIONS
A MACHINE LENGTH 3260 mm (128.4 in)
B WHEELBASE 2400 mm (94.5 in)
C MACHINE HEIGHT 2380 mm (93.7 in)
D MACHINE HEIGHT (ROPS) 1755 mm (69.1 in)
E DRUM WIDTH 1540 mm (60.6 in)
F MACHINE WIDTH 1540 mm (60.6 in)
H GROUND CLEARANCE 260 mm (10.2 in)
I DRUM DIAMETER 810 mm (31.9 in)
TIRES DIMENSION 10.5/80-16 6PR TL
