Armaments Systems Forum BG Alfred F. Abramson …...Load, Assemble, and Pack (LAP) Ammunition Items...

13
Presented at the: Armaments Systems Forum Presented By: BG Alfred F. Abramson III Joint Program Executive Officer Armaments and Ammunition 3 June 2019 1 DISTRIBUTION STATEMENT A: Approved for Public Release; distribution is unlimited. PAO Log# 280-19

Transcript of Armaments Systems Forum BG Alfred F. Abramson …...Load, Assemble, and Pack (LAP) Ammunition Items...

Page 1: Armaments Systems Forum BG Alfred F. Abramson …...Load, Assemble, and Pack (LAP) Ammunition Items LRPF Scranton AAP (SCAAP) Manufacture Metal Parts for artillery, mortar, and 5”

Presented at the:Armaments Systems Forum

Presented By:BG Alfred F. Abramson III

Joint Program Executive OfficerArmaments and Ammunition

3 June 2019

1DISTRIBUTION STATEMENT A: Approved for Public Release; distribution is unlimited. PAO Log# 280-19

Page 2: Armaments Systems Forum BG Alfred F. Abramson …...Load, Assemble, and Pack (LAP) Ammunition Items LRPF Scranton AAP (SCAAP) Manufacture Metal Parts for artillery, mortar, and 5”

….Be comfortable being uncomfortable…..

2DISTRIBUTION STATEMENT A: Approved for Public Release; distribution is unlimited. PAO Log# 280-19

Page 3: Armaments Systems Forum BG Alfred F. Abramson …...Load, Assemble, and Pack (LAP) Ammunition Items LRPF Scranton AAP (SCAAP) Manufacture Metal Parts for artillery, mortar, and 5”

We Changed Our Name…..

3DISTRIBUTION STATEMENT A: Approved for Public Release; distribution is unlimited. PAO Log# 280-19

Page 4: Armaments Systems Forum BG Alfred F. Abramson …...Load, Assemble, and Pack (LAP) Ammunition Items LRPF Scranton AAP (SCAAP) Manufacture Metal Parts for artillery, mortar, and 5”

• Build Readiness• Modernization• Reform• Strengthen Alliances

and Partnerships

Context – The Focus Has Shifted

4

• Close Critical Capability Gaps…

• Achieve Overmatch and Begin Fielding Next Generation…

• Strengthen overmatch….• Modernization Priorities• Operational Readiness

DISTRIBUTION STATEMENT A: Approved for Public Release; distribution is unlimited. PAO Log# 280-19

Page 5: Armaments Systems Forum BG Alfred F. Abramson …...Load, Assemble, and Pack (LAP) Ammunition Items LRPF Scranton AAP (SCAAP) Manufacture Metal Parts for artillery, mortar, and 5”

Joint Program Executive OfficeArmaments & Ammunition

COL William McDonough

COL Jonathan Slater

Mr. KeithGoodingUSMC

Project DirectorJoint Bombs

Program ManagerTowed Artillery Systems

Project Manager Combat Ammunition Systems

Project ManagerClose Combat Systems

OEDCAExecutive Director Conventional Ammunition

SMCA Assessment

US Marine Corps5

COL Hector Gonzalez

Project ManagerManeuver Ammunition Systems

Col (USAF) Michael

Tannehill

JPEO A&ABG Alfred F. Abramson III

DJPEO A&AMr. Andrew DiMarco

JPEO A&A Chief of Staff

Mr. John Curran

Project DirectorJoint Services

COL Justin Highley

AJPEO InternationalMr. Thomas Coradeschi

CAPT Brian Schorn USN

Single Manager for Conventional

Ammunition (SMCA)

Chief Technology

OfficerMr. Paul Manz

CW5Robert E. Smith, Jr.

US Army US Air Force US NavyDISTRIBUTION STATEMENT A: Approved for Public Release

MISSION: Lead the development, procurement, and delivery of lethal armaments and ammunition providing joint warfighters with overmatch capabilities to defeat current and future threats.

Page 6: Armaments Systems Forum BG Alfred F. Abramson …...Load, Assemble, and Pack (LAP) Ammunition Items LRPF Scranton AAP (SCAAP) Manufacture Metal Parts for artillery, mortar, and 5”

Supporting Army Modernization Priorities

6

Long Range Precision Fires

Next Generation Combat Vehicle

Future Vertical Lift

Network / C3I

Air and Missile Defense

Soldier Lethality

Supported by 11 ProjectsIncludes: Enhanced Lethality Cannon Munitions, 155mm HE Rocket Assist, Extended Range and Cannon Delivered Area Effects Munitions

Supported by 8 ProjectsIncludes: Enhanced Lethality Medium Cal Ammo, Advanced Multipurpose 120mm Tank Round and 50mm

Supported by 1 ProjectAviation Expendable Countermeasures

Supported by 1 ProjectAssured Precision Weapons and Munitions

Supported by 1 Project30x113mm CUAS Munitions

Supported by 11 ProjectsIncludes: Advanced Armor Piercing (ADVAP) for Small Cal, 40mm Low Velocity HE Air Burst and Next Generation 6.8mm Ammunition

JPEO A&A has four additional programs which are enablers to all six CFTs

JPEO Armaments & Ammunition is enabling increased Lethality and ensuring future battlefield success against peer/near-peer adversaries.

DISTRIBUTION STATEMENT A: Approved for Public Release; distribution is unlimited. PAO Log# 021-15

Page 7: Armaments Systems Forum BG Alfred F. Abramson …...Load, Assemble, and Pack (LAP) Ammunition Items LRPF Scranton AAP (SCAAP) Manufacture Metal Parts for artillery, mortar, and 5”

Key Development Thrusts

• Critical armaments proactively “pulling” lethal technologies and system-of-systems capabilities from Army S&T developers like CCDC-AC, including …

– Extended Range Cannon Artillery (Munitions, Weapons, Super Charge, Extended Range alternatives, Precision)

– PGK Modernization, Anti-Jam/Anti-Spoof– Mobile Wheeled Howitzer – Cannon-Delivered Area Effect and Sensor Fuzed Munitions– Terrain Shaping Obstacle– Advanced Armor Piercing (ADVAP) and One Way Luminescence (OWL) for

Small Cal Ammo

• Precision Munitions - Leading effort to ensure Assured Position, Navigation, and Timing (A-PNT) Precision and Conventional Fires in GPS Degraded/Denied environments

– Assured Precision Weapons and Munitions (including A-PNT, M-Code GPS, Network Assisted A-PNT (NA2), AltNav and non-GPS solutions)

7DISTRIBUTION STATEMENT A: Approved for Public Release; distribution is unlimited. PAO Log# 280-19

JPEO A&A is fully engaged to develop, deliver, and ensure Combat Overmatch

Page 8: Armaments Systems Forum BG Alfred F. Abramson …...Load, Assemble, and Pack (LAP) Ammunition Items LRPF Scranton AAP (SCAAP) Manufacture Metal Parts for artillery, mortar, and 5”

FY2017 - FY2020 Budget Comparisons

8

1,681.1M 1,832.4M

2,296.6M2,586.3M

60.8M42.2M

37.0M

44.1M

1,037.70M 816.3M

1,143.0M

1,097.0M

97.6M 129.9M

138.3M

227.5M

267.4M 331M

334.8M

405.8M

OMA = 9.8M OMA = 9.8M

OMA = 45.8M

OMA = 44.1M

0.00

500.00

1,000.00

1,500.00

2,000.00

2,500.00

3,000.00

3,500.00

4,000.00

4,500.00

5,000.00

FY2017 FY2018 FY2019 FY2020

PAA WTCV Other Services OPA RDTE OMA

DISTRIBUTION STATEMENT A: Approved for Public ReleaseSource PBs

Page 9: Armaments Systems Forum BG Alfred F. Abramson …...Load, Assemble, and Pack (LAP) Ammunition Items LRPF Scranton AAP (SCAAP) Manufacture Metal Parts for artillery, mortar, and 5”

Single Manager Conventional Ammunition (SMCA)

Providing all Services with the Highest Quality and Cost Effective Ammunition

SMCA Mission: Manage DoD conventional ammunition, and personnel and training functions (DoDD 5160.65)

Objectives: Achieve the highest possible degree of efficiency and effectiveness in the DoD operations required to acquire top quality conventional ammunition for U.S. Forces

9DISTRIBUTION STATEMENT A: Approved for Public Release; distribution is unlimited. PAO Log# 021-15

Sec Def Sec Army ASA(ALT) JPEO A&A (est. 2002)

Page 10: Armaments Systems Forum BG Alfred F. Abramson …...Load, Assemble, and Pack (LAP) Ammunition Items LRPF Scranton AAP (SCAAP) Manufacture Metal Parts for artillery, mortar, and 5”

JPEO A&AGOCO Support to Army Priorities

• Nearly all DOD weapon systems use products produced by the GOCO Ammo industrial base• JPEO A&A is the Single Manager for Conventional Ammo (SMCA) and responsible for

modernization, sustainment, and production at the GOCOs

• The success of the Army’s Modernization Plan depends on a vibrant, modernized Industrial Base

• JPEO A&A continues investment to enhance GOCO manufacturing capabilities: FY2019 = $458M FY2020 = $475M

Plant Mission CFTs Supported

Holston AAP(HSAAP)

Manufacture Explosives: RDX (USAF Bombs), HMX (Missiles), IMX (Mortars/Artillery)

Soldier LethalityLRPF

Radford AAP (RFAAP)

Manufacture Large Volumes OfPropellants And Propellant Ingredients

Soldier LethalityLRPFAMDNSCVFVL

Lake City AAP(LCAAP)

Provider of DoD Small Caliber Ammunition5.56mm, 7,62mm, .50 Cal Soldier Lethality

Iowa AAP (IAAAP)

Load, Assemble, and Pack (LAP) Ammunition Items LRPF

Scranton AAP (SCAAP)

Manufacture Metal Parts for artillery, mortar, and 5” Navy projectiles LRPF

DISTRIBUTION STATEMENT A: Approved for Public Release

Page 11: Armaments Systems Forum BG Alfred F. Abramson …...Load, Assemble, and Pack (LAP) Ammunition Items LRPF Scranton AAP (SCAAP) Manufacture Metal Parts for artillery, mortar, and 5”

DOTC Financials

11

JPEO A&A’s Use of DOTC (FY16-FY19) – Total Funding

FY16-FY18 actuals; FY19 projected

$-

$20.00

$40.00

$60.00

$80.00

$100.00

$120.00

$140.00

$160.00

FY16 FY17 FY18 FY19

Mill

ions

PEO AMMO PD-JOINT SERVICES PM-CAS PM-CCS PM-MAS PM-TAS

DISTRIBUTION STATEMENT A: Approved for Public Release; distribution is unlimited. PAO Log# 280-19

Page 12: Armaments Systems Forum BG Alfred F. Abramson …...Load, Assemble, and Pack (LAP) Ammunition Items LRPF Scranton AAP (SCAAP) Manufacture Metal Parts for artillery, mortar, and 5”

Meeting Joint Warfighter’s Needs!

12

FY2018 Snapshot

• Direct Fire Ammunition = 908M rds.• Indirect Fire Ammunition = 1.95M rds.• AF and USN Bombs = 250,000+• Misc. Ammo/Munitions (ex. Grenades, Pyro,

Less than Lethal Rds.) = 3.24M • Demil = 49k tons of conventional ammo &

~14k tons of missiles & missile components

DISTRIBUTION STATEMENT A: Approved for Public Release; distribution is unlimited. PAO Log# 280-19

Page 13: Armaments Systems Forum BG Alfred F. Abramson …...Load, Assemble, and Pack (LAP) Ammunition Items LRPF Scranton AAP (SCAAP) Manufacture Metal Parts for artillery, mortar, and 5”

12