Robomart.comhttp://www.robomart.com/

PRODUCT NAME : Arm9 Mini 2440 With 3.5 Inches LCD

MODEL : RM0456

PRICE : Rs 8,500.00

SKU : RM0456

WEIGHT : 500

STOCK : In Stock

MANUFACTURER : Robosapiens India

DIMENSIONS(LxWxH) : 0 x 0 x 0

DESCRIPTION

Mini 2440 SBC (Single-Board Computer) with 400 MHz Samsung S3C2440 ARM9 processor, 128 MB SDRAM, 256 MB NANDFlash and 2 MB of NOR Flash. The board is ideal for learning about ARM processor, embedded operating systems and standaloneembedded systems.

The Board has been fabricated in a friendly manner so that a user can connect their peripherals according to their need. Formaking the board more interactive LCD interface and 4 Bit User LEDs has been provided. LCD Up to 64K color TFT,3.5 inches to12.1 inches, up to1024x768 pixels can be interfaced with the Board.

The interfacings provided are listed below :

1 10/100M Ethernet RJ-45(DM9000) : Physical Network Interface 3 Serial Port : Serial Communication with PC or any Serial compatible Device 1 USB Host : Communication Protocol between the Processor and PC where Processor isHOST 1 USB Slave Type B : USB B type Connector. Normally used while programming through USBBootloader 1 SD Card Interface : SD cards interface for realising Memory Allocation with External Memory 1 Stereo Audio out, 1 Micro In : A user can provide a sound Input and can generate any audiooutput. 1 20-Pin JTAG : Joint Test Action Group for testing PCB or sub blocks inside a IntegratedCircuits using boundry scan 4 USER LEDs : To monitor GPIO of any PORT 6 USER buttons : To provide Different Inputs from the Users 1 PWM Beeper : Piezo Buzzer for getting PWM sound Frequency 1 POT can be used for A/D converter adjust 1 AT24C08 for I2C test : 1 K Byte EEPROM can be accessed using I2C 1 20-Pin Camera Interface 1 Battery for RTC : 3.3V Li Ion battery Power In(5V), with switch and lamp

1 / 3

Robomart.comhttp://www.robomart.com/

Box Contains:

1 x mini2440 developement board1 x 3.5 inches LCD1 x usb cable1 x Power adaptor (+5V)1 x Ethernet cable1 x H-JTAG emulator (parallel port, wiggler)1 x DB9 serial cable

Specification

General Characteristics

Type Development Board

Product ID RM0456

Dimension (100 x 100) mmControl Circuit

Controller Samsung S3C2440A ARM920T

Clock Frequency 12 Mhz

Data Communication Serial / Parallel

Sensor Interface Analog / Digital Sensors

Display 41 pin connector for FriendlyARM Displays and VGA Board ; 4 Bit LEDDisplay

Parallel Interface 34 GPIO Pins

Serial Interface One DB9 connector (RS232) ; Three serial port connectors(TTL)

Programming Mode ISP (In System Programming) via UART 0 (RS232)

Programming Interface DB9 connector (RS232)

Supported Programmers DB9 serial null modem cable

Softwares Required USB Download Driver (Windows) , WinCE USB Driver (Windows) , DNWDownload Tool (Windows) , SuperVivi Transfer Tool (Windows)

Input Devices Analog / Digital Sensor , Serial Input

External InterruptSource

6 User Inputs

Memory

Flash Program Memory 256 MB NAND Flash and 2 MB NOR Flash with BIOS

EEPROM 1024 Byte (I2C)

Internal RAM 128 MB SDRAM, 32 bit BusPeripheral Features

Programmable I/OLines

34 GPIO Lines

Timers Five 16 bit Timers

ADC 8-channel, 10-bit ADC

Serial Interface 3 Programmable serial UART

Master / Slave Interface 2 SPI Serial Interface

PWM 4 PWM Channels

Watch Dog Timer Programmable Watch Dog Timer With on chip OscillatorSpecial Features

2 / 3

Robomart.comhttp://www.robomart.com/

Internal Oscillator FCLK for CPU, HCLK for the AHB bus peripherals, and PCLK for the APBbus peripherals.

External Oscillator 12 Mhz

Interrupt Source External and Internal

Clock Frequency Setting Adjustable through SoftwareADD ONS (Other Peripheral Modules can be interfaced as per need)

IR based ProximitySensor

YES

IR Based Digital 5Sensor Array

YES

Sound Sensor YES (Using 3 Pin Jumper Wire)

Light Searching Sensor YES (Using 3 Pin Jumper Wire)

DTMF Decoder Module YES

8 Bit Digital Keypad YES

LM 35 TemperatureSensor

YES ( Using three single Pin Jumper Wire)

Ultrasonic Sensor YES

Gas Sensor Module YES

ADXL 355Accelerometer

YES

7 Segment LED display YES

Motor Driver External Motor Driver Board like RM0019 , RM0024 , RM0030 , RM0032 ,RM0039

16 x 2 LCD Display YES

USB to TTL Converter YES ( Using 4 single Pin Jumper Wire)

GPS Adapter YES (Using 1 Single PIN jumper wire)

Xbee Series 1 / Series 2/ Pro

YES (Through Robosapiens Xbee Adapter)

GSM SIM 300 / 900Modem

YES

Powered by TCPDF (www.tcpdf.org)

3 / 3