Arm-Mounted Cutoff, Flat Lens KAD/KAC Use for parking ... · PDF fileFP DPA DPP FP DPA DPP FP...
Transcript of Arm-Mounted Cutoff, Flat Lens KAD/KAC Use for parking ... · PDF fileFP DPA DPP FP DPA DPP FP...
Area Lighting
KAD/KACContour" Series
KAD
Features KAC
Housing: Rugged, die-cast, soft-corner alu-minum housing with 0.12" nominal wall thick-ness. Extruded 4" soft corner arm for pole orwall mounting is standard. Dark bronze poly-ester powder finish is standard with otherarchitectural colors available.
Door Frame: KAD die-cast door frame hasimpact-resistant, tempered glass lens whichis fully gasketed with one-piece bonded tu-bular silicone. KAC die-cast aluminum doorframe has prismatic, impact-resistant, tem-pered glass, drop dish acrylic lens or dropdish polycarbonate lens. Door frame is fullygasketed with one-piece tubular silicone.
Optics: KAD reflectors are anodized hydro-formed/ segmented aluminum. Four cutoff dis-tributions available: Type II (Roadway), TypeIH(Asymmetric),TypelV(ForwardThrow)andType V (Symmetric). Reflectors are field-in-terchangeable. KAC reflector is optical-qual-ity aluminum that works in tandem with a light-diffusing prismatic lens.
Ballast/Electrical System: Ballast is high-reactance, high power factor (70-1 BOW HPS)or high power factor constant-wattage au-totransformer (175-400W MH & HPS). Ballastis copper wound and 100% factory tested.
Finish: Dark bronze polyester powder finish(DDB) is standard with other architecturalcolors available.
Socket: Porcelain, horizontally (position)oriented mogul base socket with copper al-loy, nickel-plated screw shell and center con-tact. UL listed 1500W-600V. 4KV pulse rated.
Listings: UL listed for wet locations. Listedand labeled to comply with Canadian Stan-dards (see options).
246
Arm-Mounted Cutoff, Flat LensUse for parking areas, street lighting, walkways and car lots.
Catalog Number
DesignationHIGH PRESSURE SODIUM
70W KAD 70S100W KAD 100S1 5 0 W KAD 150S250W KAD 250S400W KAD 400S
METAL HALIDE100W KAD 100M150W KAD 150M1
175W KAD 175M200W KAD 200M2
250W KAD 250M1
320W KAD 320M2
350W KAD 350M2
400W KAD 400M1
HIGH PRESSURE SODIUM150W KAC 150S250W KAC 250S400W KAC 400S
METAL HALIDE150W KAC 150M1
175W KAC 175M200W KAC 200M2
250W KAC 250M1
320W KAC 320M2
350W KAC 350M2
400W KAC 400M1
1Distribution(select one)
R2 R3 R4 R5S VoltageR2 R3 R4 R5S 12QR2 R3 R4 R5S 2083R2 R3 R4 R5S riiii"
R2 R3 R4 R5S 277347
R2 R3 R4 R5 4803
R2 R3 R4 R5 TB4
R2 R3 R4 R5R2 R3 R4 R5R2 R3 R4 R5R2 R3 R4 R5R2 R3 R4 RSR2 R3 R4 R5
FP DPA DPPFP DPA DPPFP DPA DPP
FP DPA DPPFP DPA DPPFP DPA DPPFP DPA DPPFP DPA DPPFP DPA DPPFP DPA DPP
FP = Flat prismatic lens (C73T)DPA = Drop prismatic lens (acrylic)DPP = Drop prismatic lens (polycarbonate)
Example: KAD 400M R3 120 SPD09
MountingSPD04 Square pole arm5
SPD09 Square pole armRPD04 Round pole arm5
RPD09 Round pole armWWD04 Wood pole or wall5
WWD09 Wood pole or wallWBD04 Wall bracketWBD09 Wall bracket
I/Arm Less Arm (Whenordering KMA,D A D 1 2 )
Options/AccessoriesSCWA Super CWA pulse start
ballast (TB std.)LLRPSL Low loss reactor pulse
start ballast (277V only)
For additional options andaccessories, see page 312.
NOTES:1 May be ordered with SCWA or
LLRPSL.2 Must be ordered with SCWA or
LLRPSL.3 Consult factory for availability in
Canada.4 Multi-tap ballast (120, 277,347V).5 SPD09,RPD09orWWD09mustbe
used when luminairesareorientedon a DM29, DM39 or DM49 drillingpattern.
6 Includesmountingarm.CANADIAN SHIPMENTS: AddCSAassuffixto catalog number.
KAC
KAD
STANDARD PACKAGINGFixtures ship complete in unit cartonsonly. Example:(Qty 13) KAD 400M R3 120 SPD09
KAC 400M FP 120 SPD09(13 cartons of 1 f ixture)
Accessor ies ship separately.
DIMENSIONSEPA6: 1.2ft.2
Length: 17V4I44.5)Width:17ya(44.5)Depth:7VM18.1)
DIMENSIONSEPA6: FP option 1.2 ft-2 ( .11m2)
DP option 1.4 ft2 (.13m2)Length: 17V2 (44.5)Width: 17'/2 (44.5)Depth: FP option 7y«(18.1)
DP option 11 ' / a (28.3)
PSG6
Max. weight: 42lbs. (19.1 kg) Max.weight: 40lbs.(18.1 kg)
All dimensions are inches (centimeters)unless otherwise specified.
f* L/THON/A L/BHT/NG
II I ILighting
ArchitecturalGeneral Purpose
OutdoorLighting
Lithonia's distinctive designs, signature ac-cents and high-performance optical systemscombine to provide a performance and stylingselection unmatched in the industry.
Lithonia features high-quality products thatare characterized by superior-grade materialsfor reliability, highly engineered designs forperformance and skilled craftsmanship foraesthetic styling.
Area/ Street Lighting......................... 242Floodlighting....................................... 256Wall-Paks ...........................................266Pathway/Accent Lighting................. 272Decorative Post Tops ....................... 279Parking Garage Lighting ..................280Sportslighting..................................... 283Wind Map .........irt,*,.rt........................286Poles ..„.«„.,„............;.......................... 287Outdoor Options & Accessories .....312Antique Street Lamps .......................321Hydrel..................................................343
f* t/THON/A L/GHT/NB PSG6 241
Catalog Number
Architectural Ceiling/Wall MountedCompact Fluorescent
Example: VGR1C 50M 120 DWHG SF LPI
1Series
Low Profile (ADA)VGR1C 3.7" DeepVGR2C 3.7" Deep
ILamp type
Twin-tube(s)'13TT2/1 3TT
Double twin-tube(s)13DTT2
2/13DTT18DTT2/18DTT26DTT
Triple-tube(s),26TRT32TRT42TRT
High Pressure Sodium
70s
IVoltage
120, 208, 240,277, 347,uiuni T4IVIVUL 1
Paint Options5
Standard Textured Colors:DWHG WhiteDBLB BlackDBNH Dark Bronze
Optional Textured Colors:DSPD Dark GrayDSPJ Light GrayDSPE GreenDSPG Dark RedDSPF RustDSPH Red
Lamps9
LPI Lamp(s)included
(standard)L/LP Less
Lamp(s)
50fVT70M3
Lamp/Fixture DataWattage Ballast
FLUORESCENT
WeightLbs
13W Electromagnetic, NPF8.5018W Electronic, HPF26W Electronic, HPF32W Electronic, HPF42W Electronic, HPF
HIGH PRESSURE SODIUMBOW HX-HPF70W HX-HPF
METAL HALIDE50W HX-HPF70W HX-HPF
8.508.508.508.55
16.3012.80
11.4012.80
Lamp Base
GX23G24q-2
G/GX24q-3G24q-3
GX24q-4
Med.Med.
Med.Med.
DIMENSIONSAll dimensions are inches (centimeters).
VGR1C
OptionsDF Double fuse (208V, 240V)5
EC Emergency circuitGLR Internal fast-blow fusing6
GMF Internal slow-blow fusing6
NL Night-light (15W Max.)7
PE Photoelectric cellQRS Quartz restrike system5
SF Single fuse (120V, 277V)5
TRS Tamper-resistant screws8
CSA Listed and labeled to comply withCanadian Standards
NOTES:1 120Vonly.2 Notavailablewith347V.3 Low UV lamp is included and recommended for
replacement.4 Optional multi-volt electronic ballast (forTRT
lamps) capable of operating on any line voltagefrom 120V to 277V.
5 Option available for HID units.6 Option available for compact fluorescent.7 Option available for single lamp units only.8 T-20 screws with center reject pin.9 Lamp included unless L/LP isspecified.
Accessories /Order as separate catalog numbers.)Cat. No. DescriptionRK1 T10DRV Torx TX10 screwdriver, for use with
Gateway set screws.
RK1 T20BIT Hex-base driver bit, Torx TX20, for tamper-resistant screws with center reject pin.
RK1T20DRV TorxTX20screwdriver,forusewithtamper-resistant screws (TRS option).
VGR2C
3.7"(34.8) I9.4)
Rough Service Lighting
VGR1CVG R2C
Gateway Series™
(34.8)
f* L/THONIA UCHT/NG PSG6
Bezel: One-piece, die-cast aluminum, lowcopper alloy. Bezel encloses lens and se-cures to housing with stainless steel Torx®T10 set screws (two included).
Finish: Standard finish is textured polyesterpowder coat in white, black or bronze. Option-al architectural colors available.
Lens: Translucent white, injection-molded,UV-stabilized polycarbonate lens, .125" thick.Smooth exterior for easy cleaning. Interiorpattern diffuses light for smooth surface illu-mination.
Housing: One-piece, die-cast aluminum, lowcopper alloy. Post-painted in polyester pow-der coat. Use four-hole mounting pattern formaximum vandal resistance.
Reflector: HID Reflector is semi-specular alu-minum. CFL reflectors are finished in high-gloss white powder coat.
Lamps: Included unless L/LP is specified.
Gasket: Perimeter lens gasket is one-piecesilicone "0" ring. Pad mounting gasket(closed-cel l neoprene) seals housing tomounting surface.
Ballast: HID: High reactance, high power fac-tor. Starting temperature -20°F (-29°C) for MHand -40°F for HPS. UL-recognized component.CFL: Class P, electronic, high power factor,starting temperature 0°F (-18°C). Exception:13TT is electromagnetic, normal power fac-tor, 120V only.
Sockets: CFL: High-temperature thermoplas-tic with lamp retention clip. HID: medium-base porcelain, UL listed 660W, 600V, 4KVpulse rated.
Listings: HID: UL 1572 listed. CFL: UL 1570 list-ed for wet locations. Listed and labeled tocomply with Canadian Standards. _