ARE YOU UNEMPLOYED?

FIRST-CLASS MAILpublished by: C.E. Publications, Inc., P.O. Box 3006, Bothell, WA 98041-3006

Phone: 425/806-5200 • Fax: 425/806-5585 • Email: [email protected]

AUGUST 20, 2014 • VOLUME 46, NO. 25 • $4.00

Contract Employment

®

www.cjhunter.coma product of CE Publications, Inc.

Seattle Aerospace RecruitmentDelivery [email protected]

Phoenix Aerospace RecruitmentDelivery [email protected]

Ft. [email protected]

National Recruiting - Orange, [email protected]

San [email protected]

[email protected]

[email protected]

VOLT is hiring for contract openings in San Diego, CAVOLT is seeking contractors for the following positions:

Composite Design & Analysis Engineer Weight & Mass EngineerIntegration Engineer Stress EngineerMechanical Design Engineer (Pro-E) Electrical Drafter II (Pro-E)Composite Engineering Designer (Pro-E) Engineering Designer (Pro-E)Senior Mechanical Engineer Drafter (Pro-E)

CALL VOLT TODAY FOR MORE DETAILS!877.861.8347 - Please reference “San Diego Openings” when calling.

Or you can email your resume to: [email protected] ~ Please reference San Diego in the subject line

AARREE YYOOUU UUNNEEMMPPLLOOYYEEDD??Show the staffing firms you areready for work with your FREELISTING on the Hot Sheet ofAvailable Contract Personnel.

Submit your listing atcjhunter.com

See you on the Hot Sheet!

2 – August 20, 2014 C.E. Weekly

WESTLAX/LONG BEACH 866.458.4322DER, AR or ODA Stress Engineers (2461) - for DaDT orSRM programs - Rate $90/hour

Stress Engineers - Prior 7-Series fleet support

NORTHWESTANCHORAGE, AK 907.562.1633IT Systems Administrator IV (0276) BS petroleum orother engineering preferred. Advanced Excel skills

SOUTHEASTMISSISSIPPI 866.517.9514Quality Engineer III (13141) - Strong exp with compositelayup, FAA conformity. Must have supplier exp

ST. AUGUSTINE, FL 866.517.9514Manufacturing Engineers - Exp with planning and man-ufacturing, strong computer skills, prefer a BS inEngineering

SOUTHEAST (Continued)

MELBOURNE, FL 866.517.9514Structural Engineer - Structural analysis exp. Structuraldesign of primary based aircraft structure. Must haveNX experience

SAVANNAH, GA 866.517.9514Manufacturing Engineer II (8686) - CATIA V5, SAP, man-ufacturing and planning

DER Engineers for Structure or Power Plant (3102) -Must have current Part 25 FAA for power plant. Musthave FAR Part 25 approvals for primary structure position

Electrical Harness Engineers (3211) - Routing and sup-porting of electrical components

EHI Engineer (9412) - EWIS and CATIA exp, knowledgeof wire/cables to harness assembly

Contract Structures MRB Engineer (11502) - BS in MEor aerospace, exp as MRB at an airframe manufacturer(fuselage, wing, empennage)

Manufacturing Engineer III (8607) - Must read engi-neering drawings, Lean Six Sigma, planning and prob-lem solving for manufacturing issues

Quality Engineer II - Must have knowledge of CATIAand/or Solumina, working with quality managementsystems, documentation support and be a liaison sup-port to suppliers

BRANCHES:

Anchorage, AK

907.562.1633

Atlanta, GA

877.272.0088

Austin, TX

800.917.2841

Bellevue, WA

855.428.8397

Charleston, SC

866.224.2745

Costa Mesa, CA

800.234.8644

Green Bay, WI

800.333.1389

Hartford, CT

866.636.4723

Houston, TX

888.737.0050

Irving, TX

800.270.4737

Philadelphia, PA

844.786.7580

Phoenix800.456.8644

800.657.0997

San Antonio, TX

866.570.1503

Santa Clara, CA

408.916.4844

Savannah, GA

855.373.6858

Seattle, WA

800.678.8644

St. Louis, MO

800.472.3737

Tampa, FL

866.517.9514

Westlake Village, CA

866.458.4322

Wichita, KS

800.333.8644

We pay thousands in referral bonuses every month!

NORTHWEST - TONS OF OPENINGS!WASHINGTON 800.678.8644STRESS ENGINEERS (9659, 9662)STRUCTURAL & PAYLOAD DESIGN ENGINEERS (9658, 9657)WIRE INSTALLATION DESIGNERS & ENGINEERS (9990, 9994, 9937, 0002)

MIDWEST - NEW SPECIAL PROGRAMMUST HAVE ACTIVE SECRET CLEARANCE - LONG TERM

MISSOURI 800.472.373718 STRESS ENGINEERS (8957) - Nastran, Patran, composites, primary structures20 STRUCTURAL DESIGN ENGINEERS (8962) - Degree preferred, UG NX preferred, TeamCenter, primary structures, will consider CATIA V510 TOOL DESIGN/ENGINEERS (8964) - UG NX preferred, TeamCenter, will consider CATIA V5

C.E. Weekly August 20, 2014 – A-1

(800) 820-6811 www.worktek.com

HUNDREDS OFNATIONWIDE OPENINGS

Washington ... WEIGHTS ANALYSTS

Pennsylvania ... BUYERS • SUPPLY CHAIN ANALYSTS

Arizona ... AVIONICS / ELECTRICAL TECHNICIANS • NDT TECHNICIANSSTRUCTURES / AIRCRAFT-SHEET METAL MECHANICS

St Louis, Missouri ... SUPPLY CHAIN ANALYSTSEMBEDDED SOFTWARE ENGINEERS • PROCUREMENT AGENTS

California ... STRESS ANALYSTS

Alabama ... SUPPLY CHAIN ANALYSTS • STRESS ANALYSTS

Charleston, South Carolina - Many Needed - Apply Right NowAIRCRAFT MECHANICS • A&P CERTIFIED FLIGHT LINE MECHANICS

PLANNERS • JR TOOL DESIGNERS

Employee Benefits: $$ign on Bonus • Paid Holidays • Annual Bonuses • Referral BonusesMedical Insurance • Life Insurance • 401(k) • Per Diem • Direct Deposit WeeklyFor Immediate Consideration, Call Dan Ellis at 800/820-6811

Email: [email protected] or Apply Online at www.worktek.com

A-2 – August 20, 2014 C.E. Weekly

JOBLINES – Continued on Page A-3

* See page column refers to the page number of a display ad with possible further information regarding the job openings and/or related requirements. Where Index is used, there is no display adfor that listing. The address and phone number of the firm with that job can, therefore, be found in the Index of Contract Firms in the back of each C.E. Weekly. The following feature of C.E. Weeklycategorizes job openings by discipline. Please keep in mind that JobLines represent just a portion of the total number of openings published in this issue. There are many jobs appearing in displayads, which do not appear in JobLines.

$$$$ JobLines $$$$Assignment Contract Firm/ Per Over- Expected Expected * See

Job Classification, Description Location Office to Contact Rate Diem time? Duration Start Date Page

FOREIGN ASSIGNMENTS:Aircraft System Integration Engineer Montreal, Canada TDM/Toronto 72/hr — — 12 mos+ ASAP A-1

Interiors Specialist—seat integrator Mirabel, Canada TDM/Toronto 72/hr — — 12 mos+ ASAP A-1

Project Engineer Montreal, Canada TDM/Toronto 65/hr — — 12 mos+ Urgent A-1

DOMESTIC ASSIGNMENTS:ANSYS Stress Engineers—aerospace/defense Irvine, CA Ingenium/Rockford — — — direct — Index

Aerospace Mechanical Design Engineer—AutoDesk Inventor Buena Park, CA Powernetics/Belvidere open split poss 3 mos+ ASAP 15

Aerospace Mechanical Drafter/Checkers—EM products Buena Park, CA Powernetics/Belvidere open split poss 3 mos+ ASAP 15

Aerospace Mechanical Project Engineers—MS Project Buena Park, CA Powernetics/Belvidere open split poss 3 mos+ ASAP 15

Aerospace Mechanical Quality Test Engineer Buena Park, CA Powernetics/Belvidere open split poss 3 mos+ ASAP 15

Aerospace Mechanical System Design Engineer Rockford, IL Powernetics/Belvidere open split no 6 mos ASAP 15

Aerospace Product Support—write ECs with HS system Rockford, IL Powernetics/Belvidere open split no 6 mos ASAP 15

Aerospace Project Coordinators—ISF/CMF/ECR Buena Park, CA Powernetics/Belvidere open split poss 3 mos+ ASAP 15

Aerospace Quality Test Support Engineer Rockford, IL Powernetics/Belvidere open split no 6 mos ASAP 15

Aerospace Thermal Analysis Engineer—ANSYS ICEPAK Buena Park, CA Powernetics/Belvidere open split poss 3 mos+ ASAP 15

Aircraft Assembler—Level D/continuous flow Savannah, GA Foster/Wichita 25/hr split poss 6 mos ASAP Index

Aircraft Interior Design Engineers Everett, WA Keltia Design/Lynnwood 75K — — direct — Index

Aircraft Systems Engineer—tech and engineering support Purchase, NY STS Engrg/Jensen Beach DOE poss poss — ASAP Index

Avionics Engineer—project management exp OK/TX Agente/Colleyville 50-60/hr split poss LT ASAP Index

Avionics Liaison Engineer Purchase, NY STS Engrg/Jensen Beach DOE poss poss — ASAP Index

Avionics Technical Specialist—heavy maintenance exp Denver, CO STS Engrg/Jensen Beach DOE poss poss contr-dir ASAP Index

Avionics/Electrical Engineer—modifications/STCs Memphis, TN STS Engrg/Jensen Beach DOE poss poss contr-dir ASAP Index

Business Analysis—Excel/Powerpoint Wichita, KS Foster/Wichita 20/hr no poss 4 mos+ ASAP Index

Business Data Analyst—aerospace and defense San Diego, CA Ingenium/Rockford — poss — — ASAP Index

CATIA Designer South Carolina Black Diamond/Andover 40-42/hr yes poss 3 mos ASAP Index

Circuit Design Engineer—SerDes/Virtex 5+ Redondo Bch, CA PDS/Santa Ana 65/hr — — 9 mos ASAP 2

Cisco Network Administrator—enterprise network design Dallas, TX Multax/Manhattan Beach — yes poss 6 mos+ ASAP Index

Design Engineer—SolidWorks/AutoCAD/interiors Midwest Agente/Colleyville — split poss 3-6 mos ASAP Index

Drafter/Designer—piping only Ponca City, OK Foster/Wichita 15-25/hr poss poss 11 mos+ ASAP Index

EE Technical Designer Everett, WA CTS/Bellevue 30+/hr split poss 4 mos+ ASAP 5

EE Technical Designer 4 Everett, WA CTS/Bellevue 50+/hr split poss 4 mos+ ASAP 5

Electrical Design & Analysis Engineer—TCL and Python Tukwila, WA Volt/Auburn 100/hr — — 6 mos ASAP Front

Electrical Designer—AutoCAD drafting Birmingham, AL Tech Plus/Valley Head — split — 3 mos+ Now Index

Electrical Designer—electrical-mechanical drawings Everett, WA Comforce/Bellevue open poss poss LT ASAP 13

THIS WEEK’S DISPLAY ADVERTISERS:Chipton-Ross . . . . . . . . . . . .7Comforce . . . . . . . . . . . . . .13CTS International . . . . . . . .5Global Contract Prof . . . . . .4

Additional Contract Serv . .12Advanced Technology . . . . .8Apollo Professional . . . . . . 6Belcan . . . . . . . . . . . . . . . . .6Butler . . . . . . . . . . . . . . . . . .9

Inconen . . . . . . . . . . . . . . .12Johnson . . . . . . . . . . . . . . .12Kaman . . . . . . . . . . . . . . . .12National Engineering . . . . . . .3

NORAMTEC . . . . . . . . . .10-11PDS . . . . . . . . . . . . . . . . . . .2Peak . . . . . . . . . . . . . . . . . .13RCM Technologies . . . . .Back

TDM . . . . . . . . . . . . . . . . . .A-1Triad Worktek . . . . . . . . . .A-1Volt . . . . . . . . . . . . . . . .FrontYoh Engineering . . . . . . . . .8

C.E. Weekly August 20, 2014 – 3

NATIONAL ENGINEERING SERVICE CORPORATION

www.natleng.comWe Offer:

• Direct Deposit

• 401(k)

• Per Diem

• Referral Fees

Texas & Gulf Coast Area4715 Strack Road, Suite 200, Houston, TX 77069 • Email: [email protected] or [email protected]

Call: (281) 537-9103 • Toll Free: 800/765-7499 • Fax: (281) 537-9169

** Must be US Citizen or Perm Resident / Green Card Holder **

E/I DESIGNERS-PDS, SmartPlant, AutoCAD exp, 7-15+ yrs exp, refinery/petrochem industry exp a must - Houston/Corpus Christi, TX / Baton Rouge, LA /St Paul, MNPROJECT MANAGERS-7-15 yrs exp in refinery, chemical, pipeline industries.BS degree - Houston/Corpus Christi/Port Arthur, TX and St Paul, MNVESSEL DESIGNERS-10+ yrs pressure vessel design exp, extensive fabricationexp required, AutoCAD a must, Inventor a plus - Houston, TXHYDRAULIC ENGINEER-BS degree required, subsea equipment/hydraulicdesign exp a must, drilling/production control systems design exp, 5-10 yrs exp -Houston, TXSUBSEA ENGINEERS-6-15+ yrs exp, BS degree, exp needed in the followingsubsea areas: controls, pipeline, materials, connectors - Houston, TX

National Recruiting CenterDIAL 1-800-JOB-FIND

72 Mirona Road, Portsmouth, NH 03801 • Email: [email protected]: 603/431-9740 • Call Toll Free: 800/562-3463 • Fax: 603/427-0573 • Fax Toll Free: 800/637-2562

NUCLEAR *** NUCLEAR *** NUCLEARFIELD & OFFICE LOCATIONS: MA / CA / CO / AZ / WI / KS / NC / VA / PA / FL / NH / IL

CIVIL ENGINEER-Develop a plan to mitigate the long term effects ofgroundwater degradation on underground structures and equipment to sustainlong term plant operationsCOST/ESTIMATING ENGINEER-Support all aspects of the SteamGenerator Replacement Project (SGRP) cost accounting and controlCONTRACT/PROCUREMENT-Manage contractor/vendor commercialcompliance with contractual obligations for major projects. Review contractualagreements or proposed amendments for conformityCOMMISSIONING ENGINEER-All aspects of startup and operation ofassigned systemsELECTRICAL ENGINEER-Substation engineering including detailed physicaldesign for high voltage substation projects through 345kv. Depending upon com-plexity of the project, may prepare, provide guidance, or assist in preparing anddeveloping the engineering deliverablesELECTRICAL DESIGNERS-Must have exp in power plant design. Must becapable of locating equipment in a 3D environment as well as design usingMicrostation and PDSHEALTH & SAFETY SPECIALIST-Implement and/or administer safety,health, environmental protection and substance abuse prevention programsaffecting employee and public safety, occupational health, fire protection andprevention, and equipment and property protection. DOE/NRC regulationsHVAC ENGINEER-Fire protection, support standardization of calculations,analysis, studies, reports of equipment specifications/data sheets/selectionINSTRUMENTATION & CONTROL ENGINEER-Review and prepareI&C engineering and design calculations and provide design recommendationswhich must adhere to applicable codes, standards and proceduresMECHANICAL ENGINEER-Components for vessel, tanks and pumpsMECHANICAL ENGINEER-Nuclear licensing exp for all plant systemsPROJECT MANAGERS-PMP cert and PMI trained (Nationwide)

PLANNERS/SCHEDULER-Primavera products (P3, P4 and P6) being theprimary tool used. Command and control of schedule development, mainte-nance, structure and processPROCEDURE WRITERS-Systems and procedure knowledge who can readmodifications, complete tech review, assess impact and necessity for proceduralchanges or updatesPIPE SUPPORT ENGINEER & DESIGNER-Exp in pipe supportmodeling using PDS Support Modeler, Pelican Forge. Microsoft Word, 3D CADskills, Intergraph PDS 3D, Microsoft Excel, Access, Pelican Forge SupportSupport Modeler and MicrostationPIPE STRESS ENGINEER-Strengths of materials, specialty support design,fluid dynamics, corrosion principles, piping vibration and competency withCaesar II stress analysis softwareQUALITY SOURCE INSPECTORS-QA/QC procurement activities dur-ing the execution of a major international nuclear power plant project.Implement programs to oversee and monitor progress and success during theexecution of the project. AWS/CWI certs and 10CFR50, NQA-1 QA programsSECURITY SYSTEMS-Design, develop and coordinate implementation ofboth long term and short term IT security policies and procedures includingsupport technology and monitor these policies, procedures and technologies,once implemented, to ensure complianceSTRUCTURAL ENGINEER-Preparation of structural engrg calcs for steelstructures and/or foundations. This includes basic analysis, design calculations,equipment research, sketches, etc., required to prepare documents, specifica-tions, drawings or to meet other project requirementsVESSEL ENGINEER-Develop equipment designs using validated and verifiedspecial application software (Compress or equivalent) and can perform dynamicequipment analysis and consider the effects of tank sloshing. Familiar withASME boiler and pressure vessel code

PROCESS / PROJECT ENGINEERS-BS degree, 7-15 yrs exp, multiple disciplines needed including LNG, chemical/petrochem, refining - Houston/CorpusChristi, TX and St Paul, MNPRODUCT / DESIGN ENGINEER-BS degree a must, 4+ yrs exp in anengineering environment, manufacturing, fabrication, hydraulic couplings exp -Stafford/Houston, TXMECHANICAL ENGINEERS-BS degree, 7-15+ yrs exp needed in the fol-lowing: Heat transfer, rotating eqpt, subsea connectors, pipeline - Houston, TXI/E ENGINEERS-7-15+ yrs exp, BS degree a must, oil and gas, petrochem,refining, pipeline industry exp needed, specs, sizing control valves - Houston/Beaumont, TX and New Orleans/Baton Rouge, LA


GLOBAL CONTRACT PROFESSIONALSPUTTING GREAT PEOPLE IN GREAT JOBS!

BENEFITS AVAILABLELong Term Contracts - Top Per Diem Rates - Direct Deposit - Referral Fees

Immediate Enrollment into 401(k) Program (Roth & Traditional)Travel Reimbursement - Pre-Tax Discounted Insurance Benefits Available

SAVANNAH, GA**** ELECTRICAL DESIGN ******** ELECTRICAL HARNESS ROUTING ENGR ****AR/DER ELECTRICAL ENGINEERCHECKERFLUTTER & DYNAMICS LOADS ENGINEERIADS PROGRAMMERINDUSTRIAL ENGINEERINFORMATION ARCHITECTINSTRUMENTATION ENGINEERIT APPS SENIOR SOLUTION ARCHITECTMECH ENGINEER - AAP FINAL PHASE (TSII)MRB POWERPLANT / ECS ENGINEERPLM APPLICATIONS DEVELOPER - CATIAQUALITY ENGINEERSTRUCTURAL TEST INSTRUMENTATION ENGRTEST ENGINEERTOOL DESIGN

BETHESDA, MDSOFTWARE SECURITY ENGINEER

DALLAS / FT WORTH, TXCATIA V5 TRAINERCOMPONENTS ENGINEERDESIGN CHECKER - SOLIDWORKSELECTRONIC PACKAGING ENGINEERMATERIALS ENGINEERSOFTWARE ENGINEERTECHNICAL WRITER

HOUSTON, TX &KANSAS CITY, MOIT SYSTEMS SECURITY ENGINEER

LUFKIN, TXQA ENGINEER

NEW ORLEANS, LACHECKERRELIABILITY ENGINEER

SYRACUSE, NYSTRUCTURAL ENGINEERTHERMAL ENGINEER

ORLANDO, FLANALOG ENGINEERELECTRICAL ENGINEERFACILITIES ENGINEER / PLANNERMATERIALS ENGINEERMECHANICAL DESIGN ENGINEERMECHANICAL ENGINEERPROGRAMMER / ANALYSTSOFTWARE ENGINEERTECHNICAL WRITERTEST ENGINEER

MARIETTA, GATECHNICAL TRAINER

OWEGO, NYSOFTWARE ENGINEER

MARINETTE, WIMECHANICAL ENGINEER

ALBUQUERQUE, NMNETWORK ENGINEER

4000 Sandshell Drive, Ft Worth, TX 76137800-942-2376 or 817-847-6673 • FAX 817-847-9444

Contact one of our Recruiters for informationMark Milligan ~ 877-359-2160 ~ [email protected]

Daniel Miller ~ 877-227-2123 ~ [email protected]

Joey Taylor ~ 877-280-2156 ~ [email protected]


HELICOPTER CONTRACTS - STRATFORD, CTAVIONICS SYSTEM INTEGRATION ENGINEERS

Requires avionics design / integration and DOORS exp

AVIONICS SYSTEM INTEGRATION / TEST ENGINEERSDevelop flight management requirements with DOORS

ELECTRICAL FLIGHT MGMT CONTROL SYSTEM ENGINEERSDigital flight control systems exp with MatLab / Simulink

FLIGHT SIMULATION SOFTWARE ENGINEERSNational Instruments LabView exp using C/C++ and database skills using ARINC and Mil-Std-1553

RELIABILITY / MAINTAINABILITY ENGINEERSProvide technical support for various helicopter programs

SR LEAD MANAGEMENT SYSTEM ENGINEERSRequirements Management / tech reviews exp using DOORS

SR LEAD SYSTEM ENGINEER / RISK MANAGEREvaluate risks for the combat rescue helicopter program

SR AIRFRAME STRESS ANALYSTSBroad knowledge of airframe fuselage, landing gear and attachments to the fuselage. Rotary wing exp a plus

SYSTEM ENGINEERS WITH DOORS DATABASE EXPPerform system integration tasks for helicopter programs

Contact Nancy Boyce • [email protected] • 860/916-9873Contact Marisa Boasa • [email protected] • 860/916-4102Contact Stan Malitsky • [email protected] • 860/508-4280

Belcan TechServices, East Hartford, CT Office

Belcan TechServices

•Toledo, Ohio•GAS TURBINE TEST ENGINEER

•Cincinnati, Ohio•SOFTWARE DEVELOPERS

Test with top secret or secret clearancesUTILITY ENGINEER

ELECTRICAL ENGINEERSSOLIDWORKS MACHINE DESIGNERS

PLC CONTROLS ENGINEERS

•Louisville, Kentucky•ELECTRONIC HARDWARE DESIGN

AND TEST ENGINEERS

•Indianapolis, Indiana•GAS TURBINE DESIGN ENGINEERS

PPlease send resumes tolease send resumes toLARRY HEADLARRY HEAD

Email:[email protected]

(800) 945-1900(800) 945-1900

Toll Free - 866-APS-EDGE(866-277-3343)

Visit us on the web atwww.apollopros.com

... BRANCH OPENINGS ...CONNECTICUT - Sr Avionics System Integration Engineer(27224) System integration and verification, system/subsystem design, ARINC1553, DOORS, MS Office - CT • System/Software Quality Engineer (27225)Software quality assurance, DO-178B/DO-254 development assurance, verifica-tion - CT • Electromagnetic Environmental Engineer (27155) Conduct aircraftE3 testing, Mil-Std-464/ADS-37A-PRF, RTCA/DO-160, secret clearance - CT

... Email: [email protected]

FLORIDA - Quality (27475) Composites, machining, metals and sheetmetals - MO, FL, CA • Scheduler (27474) Aerospace, expert MS Project!!, BS or10+ years exp - LT - MO • Supplier Liaison Engineer (26740) BSME/BSAE,10+ years aerospace - Direct - FL • Sr Stress Engineer (29999) BS/MS,Nastran/Patran, CATIA V5, hand calcs - OK, NC


MARYLAND - Test/Reliability Engineer (25727) Jet engine maint -CT • Quality Engr (25844) Corrective actions - CT & CA • Master Scheduler(25319) Primavera P6 - CT ... Email: [email protected]

MISSOURI - Manufacturing/Process/Liaison Engrs (27389/90)Metals, composites, machining, nonconformance - Midwest • MRB Engrs (27387)Certified Boeing Defense Systems, MRB with ABET degree - Midwest • Project Engr-Aerospace (27477) BS degree, aerospace RCCA - LT - MO • Manufacturing Engr-Die Design (27277) High speed die tooling, automotive - Direct - TN


Other Offices: Arizona - [email protected] - [email protected]

No. California - [email protected], New Hampshire - [email protected]


Hundreds of openings available forinnovative, long-term projects with our

aerospace and defense clientele nationwide.Candidates withSECRET andTOP SECRET clearances arealso needed forpositions acrossthe country.

URGENT NEEDS IN SOUTH CAROLINA!!!• Aircraft Assemblers - Heavy structures / composite exp!• Quality Inspectors - Prior aerospace electrical/wiring

inspection expContact: [email protected] or

[email protected]

• Immediate Direct Position - Quality Engineer - Supplier,TQM, QMS, QA and FAA reg knowledge. Aerospace exprequired - Seattle, WA

• Immediate Direct Positions Available - Production Supervisor-2nd shift, machine shop and leadership exp reqd, ElectricalEngineer -Digital, analog embedded systems exp. Aerospaceexp required - Everett, WA

• Immediate, Direct Positions Available - Program Manager,Manufacturing Manager, Supplier Quality Engineer, ProgramBusiness Analyst, Sr Financial Program Analyst-Aerospace exp required, interiors preferred - Marysville, WA

• Immediate Positions Available - Assemblers, Painter, DesignChecker, Product Support, Program Admin, ProjectCoordinator-Aerospace exp required - Tucson, AZ

• Immediate Direct Positions Available - Lean Manager,Operations Manager-Degreed, min 7 yrs in related/relevantexp in aerospace required - Santa Barbara County, CA

• Immediate Direct and Contract Positions Available -Reliability Engineer, Mechanical Design Engineer, StressEngineer, Electrical Engineer, Cert Engineer,Flammability Engineer, Systems Engineer, Tech Writers-Aerospace exp required. Aircraft interiors/monuments exppreferred - Orange County, CA

Contact: [email protected] [email protected] [email protected]

VISITjobs.yoh.com today

EXPLORENEW HEIGHTS WITH

Seattle, WA 425-732-6070 l St. Louis, MO 314-878-0666Denver, CO 303-280-9000 • Phoenix, AZ 602-235-9739

For more information about Yoh, visit yoh.com©2013 Yoh Services LLC - a Day & Zimmermann Company

Check out our website at:www.advancedtechno.com

Mechanical Engineering PositionsMechanical Engineering Positions• CATIA Designers - Composites• BSME - 2000 hrs Pro/E (MA, MN, TX)• Stress Engineers - Nastran• FEA Engineers - Recent FEMAP• UG Electrical Designers• Manufacturing & Methods Engineers - Visual Instruction Tools• Avionics EEs• SolidWorks Design - Aircraft structures / industrial machine

Send resume to [email protected]

Software & Hardware OpeningsSoftware & Hardware Openings• Embedded Programmer - CAN• Software Engineer - Embedded development and strong C++,

OOD (CT)• Software Build Release Engineer or Coordinator (Midwest)• DSP Engineer - Any chipset• Board Level and FPGA Design Engineers• Test Equipment Engineer• Motor Controls Engineer• Power Supply Engineer


PHONE: 877-334-7700FAX: 877-335-7700

TM

★ SPECIAL ADSPECIAL AD ★DESIGN ENGINEER

Bachelor’s degree or academic equivalent of Bachelor’s inComputer Science, Mechanical Engineering or related field,

plus 5 years exp in CAD and Pro/E Wildfire to design systemsand components for trucks and heavy duty vehicles.

Will require travel to unanticipated client sites in US forextended periods on short notice. Job in Walpole, MA

Mail resumes to:Attn: HR, Advanced Technology Innovation Corp,PO Box 32, Walpole, MA 02081. No calls! EOE


Positive environment • Group Life • Health / DentalLTDI • 401(k) • Paid Gym Membership

Advanced Technology is an Equal Opportunity / Affirmative Action Employer


AIRCRAFT ENGINEERING & DESIGNConnecticut ...Human Factors Engineer (39309) - Human Factors Engineer (39309) - Analyze contract requirements and work with team to identify compliance approaches torequirements. Write test plans for human factors requirements (lighting, egress, workload, reach and accommodation) and coordinate with other disci-plines on test activities. Prepare and write test reports documenting results for submittal to the FAA and customer. Must have experience with aircraft

Ground Test Engineer (36218) -Ground Test Engineer (36218) - Responsible for full scale fatigue and static evaluations of dynamic components, main and tail rotorwhirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance priorto flight

Florida ...Ground Test Engineer (39328) - Ground Test Engineer (39328) - Take ownership of final demonstration and release of all ATPs needed to support flight test opera-tions. Organized, hands-on, self motivated with experience with aircraft hardware required. Also, close coordination between ground test and flight testwill be needed to ensure all required on-aircraft inspections and operating limitations are accurately documented, coordinated, and executed to min-imize impact to flight test programs. Knowledge of all aspects of ground testing of helicopter components and systems as well as application of mechan-ical/aerospace engineering disciplines to a wide variety of technical problems required.

• US Citizenship or Permanent Resident Required •

• Paid Holidays • Dental• United Healthcare Medical Insurance

• Vision • Direct Deposit

NOW HIRING!

Butler America provides industry-leading outsourced engineering, technology, telecom, and fleet maintenance servicesto premier companies in the aerospace, federal defense, manufacturing, commercial, and communications industries.

For more information, please visit www.butler.com. EOE/AA/M/F/D/V

Send resumes to:Jerry RothchildEmail: [email protected] Dial: 203/926-2705or Toll Free: 800/837-9114 x2705

www.butler.com

AIRCRAFT ENGINEERING & DESIGNSt Louis, Missouri ...Structural Design EngineerStructural Design Engineer - - Aircraft composite and metallic materials, UG NX. Long term contractposition

Stress AnalystStress Analyst - - Working on aircraft composite and metallic materials, hand calculations, Nastran/Patran. Longterm contract position

CAD Drafter/DesignerCAD Drafter/Designer - - Converting paper drawings into 2D/3D drawings. UG NX or CATIA V5. Longterm contract position

• US Citizenship or Permanent Resident Required •

• Paid Holidays • Dental• United Healthcare • Vision • Direct Deposit

NOW HIRING!

Butler America provides industry-leading outsourced engineering, technology, telecom, and fleet maintenance servicesto premier companies in the aerospace, federal defense, manufacturing, commercial, and communications industries.

For more information, please visit www.butler.com. EOE/AA/M/F/D/V

Send resumes to:Nikki DimanEmail: [email protected] Dial: 949/251-1731

www.butler.com


Technical & EngineeringStaffing

Armonk, NY - 914-940-2750Dallas, TX - 800-784-6545Irvine, CA - 877-241-4124

Jacksonville, FL - 877-601-9193Knoxville, TN - 800-574-8324

Los Angeles, CA - 866-993-2440Mobile, AL - 800-784-6529Oklahoma - 800-633-6594

Philadelphia, PA - 877-239-2877San Jose, CA - 866-656-0539

St Louis, MO - 866-296-3068

MULTIPLE OPENINGS FOR PDS PIPING DESIGNERS, ELECTRICALENGINEER, I&C ENGINEER AND ELECTRICAL DESIGNER-Must be ableto interview in person - South Jersey-For above openings, contact Chris Aiello at [email protected]

DESIGN ENGINEERS-Pro-cabling exp - North Texas AreaAVIONICS/ELECTR SYS ENGINEER-Must have BSEE - Stratford, CTSTRUCTURAL/MECH DES ENGR-CATIA V5 exp, $50/hour - Dallas, TXMANUFACTURING & STRESS ENGRG POSITIONS - Savannah, GASTRESS ENGINEER-Nastran/Patran - Dallas, TXTOOL DESIGN ENGINEER-CATIA V5 - Dallas, TX-For above openings, contact Michael Geil at 800-784-6545 x252or email: [email protected]

AVIONICS ENGR-Avionics architectures & DOORS - Contract in ConnecticutSR STRESS ENGRS-Aircraft interiors, 4-10 yrs primary and seconary struc-tures, lavs, galleys, stowage bins, etc. UG NX/CATIA, Nastran/Patran/FEMAP. Multiple positions, LT - Marysville/Everett, WA-Kevin Fedor at 866-656-0539 x9511 or email: [email protected]

PROCESS PIPING/MECHANICAL DESIGNER-SolidWorks-3-5 yrs expprocess piping des/routing for high pressure fluids, LT - San Bernardino, CA-Dina Romero at 949-415-5477 or email: [email protected]

ENGINEERING GURU-Large scale project management role building rollercoasters. 10+ years PM exp. Theme park exp desired - Travel required - LosAngeles, CA-Alex Knox at 818-876-9610 or email: [email protected]

QUALITY ENGINEER-AEROSPACE COMPOSITE STRUCTURES-4-8 yrs in QE/QA and mfg environment - LT - Pasadena/Monrovia, CA-Amanda Gonzalez at 866-993-2440 or email: [email protected]

The fastest way to a new career or contract position - APPLY ONLINE!JSG Online Career Center: http://cli.gs/JSGJobs

Atlanta, GA - 800-841-0927Birmingham, AL - 800-569-3555Charleston, SC - 800-215-3555Chicago, IL - 800-323-4987

IMMEDIATE NEEDSCALL OUR

NATIONAL RECRUITERSMechanical Engineering/Design PCB - IC

Electrical Engineering - Immediate Needs!

BSME - Capital eqpt des, analysis, Pro/E, CFD, Contract to Direct - MABSME - EM packaging design, telecom/electronics, Pro/E Creo, 4-8years expPRODUCT DEVELOPMENT ENGINEER - BS/MSME, mid and sr level,Pro/E Creo, orthopedics medical expMECHANICAL ENGINEER - Inventor CAD tools, pumps, motors,industrial equipment - LTQUALITY ASSURANCE/VALIDATION ENGINEER - Pharmaceutical/medical device industry exp‘ELECTRICAL CONTROLS ENGINEER - Siemens 7 exp, discretemanufacturing, clean sheet program automationELECTRICAL CONTROLS DESIGNER - Automation, control panels,wiring, Inventor CAD toolsPCB - Mentor Expedition V7.9.4 or better, DxDesigner, broadband,RF circuits - 6 months+

• Contact Adam, Sean, or Kevin •at 800-661-8272 • email: [email protected]

SPI

SYSTEM PROSADDITIONAL CONTRACT SERVICES

NATIONAL DIVISIONwww.acsnatl.comwww.syspros.com

85 Rangeway Road, Bldg 1, Suite 2 • North Billerica, MA 01862800/661-8272 • 24 Hr Fax: 800/661-4055

INCONENCONTRACT / TEMPORARY SERVICES

Openings in Savannah, GAELECTRICAL APPLICATIONSELECTRICAL APPLICATIONS

ENGINEERSENGINEERSDevelop Electrical Wiring Interconnect System (EWIS), capable ofresolving all technical issues relating to EWIS. Produce and maintainwiring diagrams, cable/wire harness assemblies and rack/paneldesigns from electrical system schematics adhering to EWIS require-ments. Select qualified electrical components, such as connectors,backshells and other parts. Must have intimate knowledge of andability to assign wires/cables to their correct harness assembly,based on EMI/EMC and system separation or system functionalityrequirements while meeting all installation and maintainabilityrequirements. Mentor L-Cable

EHI ENGINEERSEHI ENGINEERSDevelop Electrical Wiring Interconnect System (EWIS), capable ofresolving all technical issues relating to EWIS. Produce and maintainwire harness assemblies, utilizing the CATIA V5 electrical and sheetmetal work benches. Capable of interfacing with wiring diagrams,system and EMI/EMC requirements. Must have intimate knowledgeof and ability to assign wires/cables to their correct harnessassembly, based on EMI/EMC and system separation or systemfunctionality requirements while meeting all installation and maintain-ability requirements

Send resumes to: [email protected] • (888) 208-8064

Opportunities Available forAIRCRAFT PRIMARY

STRUCTURES STRESS, DESIGNAND LIAISON ENGINEERSAlso: Interiors, Systems and MRB Engineers

and Drawing CheckersKaman Engineering Services, a division of Kaman Aerospace Group, hascontract Primary Structures Stress, Design, Liaison, Systems (Electrical,Environmental, Fuel, etc), and MRB Engineer positions and DrawingChecker positions available very soon. Must be a US Citizen or perma-nent resident, with 3-12+ years of appropriate engineering/analysisexperience on commercial transport aircraft.We Require: FEM/FEA, Nastran/Patran, CATIA V5, and SmarTeam.

Positions located in Southern California, Seattle and Charleston

Charleston Requires 12+ years of 787 primary structures stress exp.Experience with static and fatigue analysis and Boeing analysis tools.

Boeing DT methods and composites analysis experience highly desirable.

Rates are DOE, per diem allowance possible, some positions will belong term. Benefit package includes healthcare, 401(k), and vacation

Great Opportunities • Excellent Benefits • Competitive RatesPlease submit your resume and contact Kaman Engineering Services

for more information and immediate consideration.Apply online at http://kaman.applicantstack.com/x/openingsContact Alie DeGon at (425) 299-7791 or (425) 265-7032 for questions

KAMANEngineering Services


We’ll help you find the ideal job to meet your interests and qualifications!

Positions Available Now• STRUCTURAL DESIGNERS (CATIA V5)• MANUFACTURING ENGINEERS• INTERIOR DESIGNERS (CATIA V5)• ELECTRICAL DESIGNERS (CATIA V5)• TECHNICAL WRITERS• AVIONICS ENGINEERS• SOFTWARE ENGINEERS

• NC PROGRAMMERS (CATIA V5)• TOOL DESIGNERS (CATIA V5)• STRESS ENGINEERS (Patran, Nastran)• FLIGHT CONTROLS ENGINEERS• SYSTEMS ENGINEERS• QUALITY ENGINEERS• PROPULSION ENGINEERS• MANY OTHER POSITIONS

Benefits Package: Medical • Dental • Per Diem • 401(k) • Holiday • Vacation Pay

COMFORCE NorthwestCOMFORCE Northwest1750 112th Ave NE, Suite C228Bellevue, WA 98004Email: [email protected]

COMFORCE NortheastCOMFORCE Northeast225 Broadhollow Road, Suite 110EMelville, NY 11747Email: [email protected]

PLEASE EMAIL US TO SEE IF YOUR BACKGROUND MATCHES ANY OF OUR JOB OPENINGS


SUBSCRIBERSERVICES

Hot Sheet of Available Contractors:For unemployed subscribers (or those with layoffnotices). We email your name, address, phone,email address, a link to your online resume, and jobclassification(s) to our advertising contract staffingfirms.

Online Profile:Every day, recruiters perform hundreds of searchesof our resume database, usually locating multipleresumes that match their keyword search. Oftensubscribers have certain requirements that do notgenerally appear on their resumes. For example: Areyou currently available, or are you working now andwon't be available for a couple of months? ... What isthe minimum rate you will accept? ... etc. Your per-sonal profile allows you to make that informationavailable to recruiters. It is critical that you keep yourprofile very current ... especially the status of youravailability. This service is only as effective for you asthe effort you devote to it.

My JobTracker:Track your saved jobs and any follow-ups you’vemade to recruiters. All records in one place for yourjob searches, responses, and notes about theassignment. Our latest subscriber service ... and oneof the most valuable!

EZjobs:Subscribers can receive each day's new job postingsfor openings that match their pre-set keywords.Those listings will be emailed to you stating thename of the recruiting firm, contact information, andall the data we have about each job.

Resume Email Forwarding History:Subscribers can track their resume forwarding histo-ry to see when and to whom their resume has beenemailed from our website. This service tracksresumes sent by: job searches using E-Resume,individual resumes sent to any of our advertisers,and updated resume distribution.

Resume View Notification:Every time your resume is viewed, downloaded orprinted by a contract staffing firm ... we immediatelyemail you a notification. Included in the email is thename of the firm, the recruiter's name (if known),keywords that the recruiter used to find your resume,and contact information. Keep in mind that we musthave your current email address on file in order foryou to participate in this service. Here, too, you mayopt out this service if you choose.

Mail Forwarding Service:You can have a permanent (or forwarding) addressto guarantee yourself of constantly receiving yourmail. If you are interested in using this service, con-tact our office for details. Email [email protected] call (425) 806-5200. Please Note: you must be auser of our Mail Forwarding Service if you put ouraddress on your resume for contact information.Cost: $10/month, charged to your account at thebeginning of the month. If no mail is forwarded, thischarge is refunded to your account at the end of themonth. As long as you have a mail forwardingaccount active, you will be charged for the serviceonly if we actually forward your mail at least onceduring a calendar month.

Free Email Account:If you are a ContractJobHunter or ContractEmployment Weekly subscriber who uses email a lot... this subscriber service will probably be of interestto you. This service is free, as long as you keep yoursubscription current. Restrictions: Any single docu-ment (either sent or received) cannot exceed 500K insize; the total amount of space allotted to any sub-scriber is 5 megabytes; you may select your ownpersonal email address. We suggest using yourname (Example: [email protected]).

Discussion Forums:Subscribers can leave messages and questions forother subscribers on this board. Discussed subjectshave included: Insurance for contractors ... overtimeon full rate ... job locations ... pre-employment drugtesting ... and lots of contractors looking for oldfriends.

C.E. Publications, Inc. • P.O. Box 3006 • Bothell, WA 98041 • 425/806-5200 • Fax 425/806-5585 • [email protected] • www.cjhunter.com


INDEX OFCONTRACT STAFFING FIRMS

NEW & ONE-TIME ADVERTISER:This firm may have job requirements elsewhere in this issue

Powernetics Inc.853 Spring Ridge CourtBelvidere, IL 61008815/885-2088www.powernetics.netemail: [email protected]

Aerospace News – U.S. now India's top arms supplier - The U.S. has edged past Russia as the topmilitary supplier to India, exporting $13.9 billion in military equipment starting in 2011. Still, about 70 percentof India's military equipment is sourced from Russia ... Work begins on Boeing's 777X wing plant - Boeing hasbroken ground on a 1.3 million-square-foot plant in Everett, Washington that will turn out wings for its new 777Xplane, a milestone celebrated by state officials who once feared the company might move the work elsewhere."We're bringing this wing home from where it is built for the 787. It is a hometown wing," Gov. Jay Inslee said... NASA Marshall cuts ribbon on ‘green’ facility for Space Launch System engineers - NASA’s Marshall SpaceFlight Center has a new rocket: the Space Launch System (SLS), and a new building for the brains behind it.recently, the center held a ribbon-cutting ceremony for the latest addition to the skyline on Redstone Arsenal.

With the help of U.S. Senator Jeff Sessions and U.S. Representative Mo Brooks, Marshall Space Flight Center introduces its new envi-ronmentally-friendly building, giving a new home to the engineers supporting NASA’s SLS: a powerful new launch vehicle. “It’s sort of,in my mind, confirmation of the Space Launch System program that is going to lead us into exploration of the solar system,” saidSenator Sessions. The facility, Building 4220, will house the 400 minds that are developing the system. “The Space Launch System isgoing to be an incredible capability for the United States, it will get our astronauts farther than we’ve ever been, ever,” said MarshallCenter Director Patrick Scheuermann ... Military sales cleared for Saudi Arabia, Turkey - The U.S. State Department has given thegreen light to potential sales of military aircraft upgrades to Saudi Arabia and medium-range air-to-air missiles to Turkey. Boeing is themain contractor on the Saudi Arabia deal, while Raytheon makes the missiles sought by Turkey ... Brazil, Argentina certify CessnaCitation M2 - Textron can begin selling the Cessna Citation M2 in Brazil and Argentina, following approval by civil aviation regulatorsin those nations. Latin America represents a significant growth market for Textron, which says it's seen a surge in orders in the regionfor its Beechcraft and Cessna products ... U.S. Army to hold competition for DCGS in fiscal 2016 - The U.S. Army announced plans tohold a competition for Distributed Common Ground System Increment 2, an intelligence system for soldiers on the battlefield, in fiscal2016. In a statement, the Army said it "will solicit vendor feedback on ways to improve and replace the software-based tools soldiersuse to analyze and integrate data and visualize intelligence information" ... Boeing hints at boost in 737 production - Boeing ChiefFinancial Officer Greg Smith hinted this week that the manufacturer may accelerate production of the 737. Boeing makes 42 of the nar-rowbody jetliner per month now, and earlier said it could raise that to 52 per month. "We continue to see very strong demand," Smithsaid at an investors' conference. "In particular on the 737, there is more pressure on the upside, and we will address that in the monthsto come."(Aerospace News reprinted from AIA Daily Lead, Aerospace Industries Association)

CONTRACTS AWARDED: The Boeing Co., Seattle, Washington, is being awarded a$295,643,284 advance acquisition contract for the procurement of long-lead items for the manufacture anddelivery of 12 Lot II Full Rate Production P-8A aircraft for the U.S. Navy (8) and the government of Australia(4). Work will be performed in Seattle, Washington (82.6 percent), Baltimore, Maryland (6.2 percent),Greenlawn, New York (4.2 percent), the United Kingdom (3.5 percent), and North Amityville, New York (3.5percent), and is expected to be completed in April 2018. Fiscal 2014 advanced procurement aircraft pro-curement (Navy) funds in the amount of $152,043,495 and foreign military sales funds in the amount of$55,800,000 will be obligated at time of award. This contract combines purchase for the U.S. Navy

($152,043,495; 51 percent) and the government of Australia ($143,599,789, 49 percent) under a cooperative agreement. This contractwas not competitively procured pursuant to FAR 6.302-1. The Naval Air Systems Command, Patuxent River, Maryland, is the contract-ing activity ... Raytheon Integrated Defense Systems, Andover, Massachusetts was awarded a $109,078,477 firm-fixed-price level-of-effort foreign military sales (Germany, Greece, Israel, Japan, Saudi Arabia, Korea, Kuwait, Netherlands, Spain, Taiwan, Ukraine) con-tract with options for engineering services for the Patriot System Tracking Radar. Work will be performed in Andover, Tewksbury, andBurlington, Massachusetts, El Segundo, California, El Paso, Texas, Huntsville, Alabama, Pelham, New Hampshire, and White Sands,New Mexico, with an estimated completion date of January 31, 2015. Fiscal 2014 operations and maintenance (Army) funds ($58,886),fiscal 2014 research, development, test, and evaluation funds ($5,287,374), and fiscal 2014 and 2010 other procurement funds($76,462,599) are being obligated at the time of the award. Army Contracting Command, Redstone Arsenal, Alabama, is the contract-ing activity ... Northrop Grumman Systems Corp., San Diego, California, has been awarded a $240,653,315 primarily firm-fixed-pricemodification for FA8620-13-C-3018 for three Block 30M RQ-4B Global Hawk air vehicles, each containing an Enhanced IntegratedSensor Suite and an Airborne Signals Intelligence Payload (ASIP), plus two additional ASIP sensors as retrofit kits. The total cumula-tive face value of the contract is $354,870,536. The contract modification is for the definitization of the advance purchase agreement.Work will be performed at San Diego, California, and is expected to be completed by June 30, 2017. Fiscal 2012 aircraft procurementfunds in the amount of $240,653,315 are being obligated at time of award. Air Force Life Cycle Management Center/WIG (Global HawkProgram Office), Wright-Patterson Air Force Base, Ohio is the contracting activity ... GE Power Conversion USA, Inc., Pittsburgh,Pennsylvania, is being awarded a $58,400,000 firm-fixed-price contract for design/bid/build services for an energy recirculation sys-tem at the Naval Warfare Center, Carderock Division, Building 633. Work will be performed in Philadelphia, Pennsylvania, and isexpected to be completed by January 2017. Fiscal 2014 research, development, test and evaluation and fiscal 2014 military construc-tion (Navy) contract funds in the amount of $45,390,580 are being obligated. The Naval Facilities Engineering Command, Mid-Atlantic,Norfolk, Virginia, is the contracting activity.


804 Technology5381 Highway N, Suite 201Cottleville, MO 63304636/928-0330, FAX 636/530-3693www.804technology.comemail: [email protected]

Acro Service Corporation39209 6 Mile Road, Suite 250Livonia, MI 48152734/591-1100, 800/844-ACRO, FAX 734/591-1217www.acrocorp.comemail: [email protected]

Additional Contract Services(please see our display ad)85 Rangeway Road, Building 1, Suite 2North Billerica, MA 01862800/661-8272, FAX 800/661-4055email: [email protected]

Additional Technical Support, Inc. (ATSI)495 Old Connecticut Pass, Suite 110Framingham, MA 01701-4567877/871-0785email: [email protected]

Adecco Technical2526 W Wackerly StreetMidland, MI 48640989/496-9377, 800/351-6646, FAX 989/496-2649www.adeccotechnical.comemail: [email protected]

Adecco Technical9171 Towne Centre Drive, Suite 215San Diego, CA 92122www.adeccousa.comemail: [email protected]

Ad-Tek Engineering Services Inc.2090 N Tustin Ave Ste 160Santa Ana, CA 92705714/573-7700, 800/451-0782, FAX 714/832-8790www.adtekjobs.comemail: [email protected]

Advanced Technology(please see our display ad)P.O. Box 32Walpole, MA 02081877/334-7700, FAX 877/335-7700www.advancedtechno.comemail: [email protected]

Advantage Technical Resourcing, Inc.10632 Little Patuxent Parkway, Suite 337Columbia, MD 21044800/888-7864, FAX 410/715-9706www.hirethinking.comemail: [email protected]

Advantage Technical Resourcing, Inc.P.O. Box 9130Norwood, MA 02062781/251-8100, 800/225-8956, FAX 800/934-6644www.hirethinking.comemail: [email protected]

Advantage Technical Resourcing, Inc.101 Metro Drive, Suite 264San Jose, CA 95110877/912-5720, FAX 408/452-9360www.hirethinking.comemail: [email protected]

Aerostructures Contract Employees Inc.2306 Oak Lane, Suite 203Grand Prairie, TX 75051972/263-3403, FAX 972/263-9518email: [email protected]

Aerotek, Inc.9800 Cavendish Boulevard, Suite 120St Laurent, QC Canada H4M 2V9514/798-6450, FAX 514/798-6480www.aerotek.comemail: [email protected]

Agente Technical714 Centerpark Drive, Suite 140Colleyville, TX 76034-2852866/758-2494, FAX 866/717-5927www.agentetech.comemail: [email protected]

Airetel Staffing Inc.P.O. Box 915864Longwood, FL 32791-5864407/788-2015, 877/877-4066, FAX 407/682-9705www.airetel.comemail: [email protected]

American Contract Group47 High Street, Suite 103North Andover, MA 01845781/245-9000, 877/723-9087, FAX 781/245-9009www.americancontractgroup.comemail: [email protected]

Apollo Professional Solutions, Inc.(please see our display ad)Corporate Headquarters29 Stiles Road, Suite 302Salem, NH 03079603/890-8778, 866/277-3343, FAX 603/890-6668www.apollopros.comemail: [email protected]

—additional Apollo Professional Solutions offices:

Glen Burnie, MD Roseville, CALakewood, CA Wildwood, MOMesa, AZ Windsor Locks, CTOrange Park, FL

Aries Group100 Cummings Center, Suite 219QBeverly, MA 01915978/998-7577, 877/806-7977, FAX 978/998-6841www.ariesgroupinc.comemail: [email protected]

Arnold-Hanafin Corp.7400 North Federal Highway, Suite C-6Boca Raton, FL 33487-1677561/982-9570, 800/891-1086, FAX 561/982-9896www.arnold-hanafin.comemail: [email protected]

Associated Staffing Inc.626 Holcomb Bridge Road, Suite 600Roswell, GA 30076770/643-8554, 888/427-4562, FAX 770/643-8558www.asi-ga.comemail: [email protected]

Beacon Engineering Resources Inc.35 Main StreetTopsfield, MA 01983978/887-4292, FAX 978/887-4905www.beaconengineeringresources.comemail: [email protected]

Belcan TechServices(please see our display ad)Corporate Headquarters11591 Goldcoast DriveCincinnati, OH 45249513/489-4300, 800/945-1900, FAX 513/489-0830www.belcan.comemail: [email protected]

Belcan TechServices(please see our display ad)20 Westbrook Street, Suite 2NEast Hartford, CT 06108-3400860/916-4102www.belcan.comemail: [email protected]

Bentley Global Resources LLC3937 Tampa Road, Suite 3Oldsmar, FL 34677-3115813/854-1500, FAX 813/854-1605www.bentleygr.comemail: [email protected]

Black Diamond Networks23 Main StreetAndover, MA 01810978/474-9980, 800/681-4734, FAX 978/470-0225www.blackdiamondnet.comemail: [email protected]

Butler America(please see our display ad)2500 Red Hill Avenue, Suite 200Santa Ana, CA 92705949/251-1731www.butler.comemail: [email protected]

Butler America(please see our display ad)Shelton Pointe, Suite 2042 Trap Falls RoadShelton, CT 06484203/926-2705, FAX 203/926-0082www.butler.com, email: [email protected]

CadStar International Ltd.100 Burtt Road, Suite 202Andover, MA 01810-5915800/562-8367, FAX 888/432-9737www.cadstar.comemail: [email protected]

Can-Tech Services1750 Steeles Avenue W, Suite 205Concord, ON L4K 2L7, Canada416/360-0926, FAX 416/360-0521www.cantechservices.comemail: [email protected]

Career Transitions LLC4101 Edison Lakes Parkway, Suite 200Mishawaka, IN 46545574/968-1860, FAX 574/968-1871www.careertransitionsllc.comemail: [email protected]

CDI Corporation500 Northridge Road, Suite 240Atlanta, GA 30350www.cdicorp.comemail: [email protected]

Chipton Ross(please see our display ad)343 Main StreetEl Segundo, CA 90245310/414-7800, FAX 310/414-7808www.chiptonross.comemail: [email protected]

Choson Resource1999 N. Amidon Ave, Suite 100BWichita, KS 67203316/729-0312, FAX 316/729-0709www.chosonresource.comemail: [email protected]

Comforce Technical Services(please see our display ad)999 Stewart Avenue, Suite 100Bethpage, NY 11714-3632516/470-6996, 800/562-0123, FAX 516/622-0650www.comforce.comemail: [email protected]

—additional Comforce office:

Bellevue, WA

CompuCom11900 NE 1st Street, Suite 200Bellevue, WA 98005425/974-2000, FAX 425/974-2001www.compucom.comemail: [email protected]

Concise Technologies20530 Route 19Cranberry Township, PA 16066724/591-5869, FAX 724/591-5713www.concisetechnologies.netemail: [email protected]

CSS Staffing263 E Main Street, 2nd Floor, Suite ANewark, DE 19711302/737-4920www.cssstaffing.comemail: [email protected]

CTS International(please see our display ad and online banner)11100 NE 8th Street, Suite 800Bellevue, WA 98004425/646-2688, FAX 425/635-7630www.ctsinternational.com

Delta Technical Solutions3601 Algonquin Road, Suite 975Rolling Meadows, IL 60008847/387-8057, FAX 866/366-5061www.dts.netemail: [email protected]

REGULARREGULARINDEXINDEX

ADVERTISERSADVERTISERS


Dineen Enterprises, Inc.P.O. Box 185Uniontown, OH 44685-0185330/633-1210, FAX 330/633-1284www.cjhunter.com/~dineenemail: [email protected]

Enea Software & Services, Inc.1711 W. Greentree Drive, Suite 108Tempe, AZ 85284-2714480/753-9200, FAX 480/753-6400www.enea.com, email: [email protected]

ESG-Engineering Services Group99 Cherry Hill Road, Suite 307Parsippany, NJ 07054973/334-4844, 800/258-1465 x206, FAX 800/354-1788www.entegee.comemail: [email protected]

Fabergent Inc.63 Ramapo Valley Road, Suite 214Mahwah, NJ 07430701/526-3400www.fabergent.comemail: [email protected]

Foster Design Inc.200 W Douglas, Suite 110Wichita, KS 67202316/832-9700, 800/345-3394, FAX 316/832-9357www.fosterdes.comemail: [email protected]

GAS/Go Consulting Group Inc.12 Harding Street, Suite 204-205Lakeville, MA 02347508/230-5030, 800/510-8050, FAX 508/230-5052www.gcg-itstaffing.comemail: [email protected]

GCR Professional Services281 Cambridge StreetBurlington, MA 01803781/270-7020, 800/234-6646, FAX 781/270-4488www.gcrtemps.comemail: [email protected]

Global Contract Professionals(please see our display ad)P.O. Box 161127Fort Worth, TX 76161-1127817/847-6673, 877/280-2156, FAX 817/847-9444www.teamglobal.comemail: [email protected]

Global Search Agency Inc.1712 S Main StreetFairfield, IA 52556-9577641/472-2735, 800/844-4658, FAX 641/469-6084www.globalsearchagency.comemail: [email protected]

HEPCO, Inc.160 Pehle Avenue, Suite 202Saddle Brook, NJ 07663-5227201/843-4400, 800/656-0099, FAX 201/843-0025www.hepcoinc.com, email: [email protected]

Hi-Tec Professional Solutions2501 E Piedmont Road, Suite 103Marietta, GA 30062-7753770/575-5855, FAX 770/575-5856www.hi-tecsolutions.comemail: [email protected]

Hi-Tek Professionals Inc.850 Chester PikeProspect Park, PA 19076610/534-8701, 888/271-1799, FAX 610/534-8697email: [email protected]

Ideal Engineering Staffing Solutions26148 Capital Drive, Suite BDaphne, AL 36526251/621-0242, 800/370-8495, FAX 800/264-6702www.idealengineeringus.comemail: [email protected]

Idex Solutions1650 NW Naito Parkway, Suite 120Portland, OR 97209503/295-1808, 888/256-7913, FAX 800/295-5438www.idexsolutions.comemail: [email protected]

IMCP.O. Box 46Murrysville, PA 15668-0046724/733-9900, FAX 724/733-7004www.imcjobs.netemail: [email protected]

Inconen(please see our display ad)6133 Bristol Parkway, Suite 232Culver City, CA 90230310/410-1931, 888/208-8064, FAX 310/410-1751www.inconen.com, email: [email protected]

Ingenium Technologies4216 Maray DriveRockford, IL 61107815/399-8803, FAX 815/399-8804www.ingeniumtech.com, email: [email protected]

ITC-Innovative Turnaround ControlsP.O. Box 5835Pasadena, TX 77508281/998-9547, 866/268-7311, FAX 281/998-9437www.turnaroundcontrols.comemail: [email protected]

John Galt Staffing77 S Bedford StreetBurlington, MA 01803781/273-9995, 888/946-4754, FAX 781/273-9099www.j-galt.comemail: [email protected]

Johnson Service Group(please see our display ad)Corporate Headquarters1 East Oak Hill Drive, Suite 200Westmont, IL 60559630/655-3500, 800/323-4987, FAX 630/655-3506www.jsginc.com, email: [email protected]

—additional Johnson Service Group offices:

Armonk, NY Knoxville, TNAtlanta, GA Mobile, ALBedford, TX North Charleston, SCBirmingham, AL Philadelphia, PACalabasas, CA San Jose, CACameron, OK St Augustine, FLIrvine, CA St Louis, MO

Judge Technical ServicesNational Division321 S Main Street, Suite 100Providence, RI 02903-7110401/454-5100, 800/765-5874, FAX 401/454-7800www.judge.comemail: [email protected]

Kaman Engineering Services(please see our display ad)11323 Commando Road West, Suite 200Everett, WA 98204425/367-4477, FAX 425/367-4605www.kaman.com/aerospaceemail: [email protected]

KEAS Inc.P.O. Box 1564Woodinville, WA 98072425/770-2662, FAX 425/491-2981www.keasinc.comemail: [email protected]

Kelly Engineering Resources3655 Brookside Parkway, Suite 100Alpharetta, GA 30022678/317-4489, FAX 678/893-0935www.kellyengineering.comemail: [email protected]

Kelly Engineering Resources15325 SE 30th Place, Suite 320Bellevue, WA 98007-6538425/643-0138, FAX 425/747-4649www.kellyengineering.comemail: [email protected]

Kelly Engineering Resources7535 E Hampden Avenue, Suite 610Denver, CO 80231-4838303/755-1107, FAX 303/755-1023www.kellyengineering.comemail: [email protected]

Kelly Engineering Resources5750 Castle Creek Parkway, Suite 187Indianapolis, IN 46250317/916-1044, FAX 317/916-1336www.kellyengineering.comemail: [email protected]

Kelly Engineering Resources1815 S Meyers Road, Suite 850Oakbrook Terrace, IL 60181630/705-0594, FAX 630/705-0677www.kellyengineering.comemail: [email protected]

Kelly Engineering Resources100 Meridian Centre Boulevard, Suite 315Rochester, NY 14618585/235-0230www.kellyengineering.comemail: [email protected]

Kelly Engineering ResourcesRoute 120 & Wilson Road, WG1-3SRound Lake, IL 60073847/270-5032, FAX 847/270-5049www.kellyengineering.comemail: [email protected]

Kelly Engineering Resources55 Westport Plaza, Suite 470St Louis, MO 63146314/275-7794, 866/656-8416, FAX 314/514-1589www.kellyengineering.comemail: [email protected]

Keltia Design Inc.16824 44th Avenue West, Suite 240GLynnwood, WA 98037206/368-9812, FAX 206/237-8950www.keltia-design.comemail: [email protected]

Kforce3 Corporate Drive, Suite 214Shelton, CT 06484203/225-1700, FAX 203/926-1414www.kforce.comemail: [email protected]

KLM Consulting Inc.5 Forte TrailSmithfield, RI 02917401/954-6003, FAX 401/349-0404www.klmcinc.comemail: [email protected]

Lehigh Technical Service538 Broadhollow Road, Suite 313Melville, NY 11747-3676631/385-1300, FAX 631/385-9275www.lehightechnical.comemail: [email protected]

LMI Aerospace4838 Ronson Court, Suite RSan Diego, CA 92111800/677-7868www.lmiaerospace.com, email: [email protected]

Manpower Professional4100 Osuna NE, Suite 102Albuquerque, NM 87109505/998-6200, 888/275-0234, FAX 505/998-6225www.manpowerprofessional.com/albuquerqueemail: [email protected]

Midcom Corporation1275 N Manassero StreetAnaheim, CA 92807714/630-1999, 800/737-1632, FAX 714/459-7055www.midcom.comemail: [email protected]

Multax Systems Inc.505 N. Sepulveda Boulevard, Suite 7Manhattan Beach, CA 90266310/379-8398, FAX 310/379-1142www.multax.net, email: [email protected]

National Engineering Service Corp.(please see our display ad)Corporate Headquarters72 Mirona RoadPortsmouth, NH 03801603/431-9740, 800/562-3463, FAX 603/427-0573www.natleng.com, email: [email protected]

—additional National Engineering Service Corp. office:

Houston, TX

Nesco Resource2 Summit Park Drive, Suite 200Independence, OH 44131216/674-5685, FAX 216/328-8173www.nescoresource.comemail: [email protected]

Nesco Resource153 Parliament Loop, Suite 1001Lake Mary, FL 32746407/719-8000, FAX 407/710-8001www.nescoresource.comemail: [email protected]


Nesco Resource1400 E Southern Avenue, Suite 330Tempe, AZ 85282206/333-0459, FAX 480/898-1720www.nescoresource.comemail: [email protected]

NORAMTEC Consultants(please see our display ad)208 Mill Street, 1st FloorRochester, NY 14614585/777-4040 x114, FAX 585/263-1840www.noramtec.comemail: [email protected]

OLSA Resources Inc.3836 N. Ballast StreetPortland, OR 97217503/608-7895, FAX 503/608-7896www.olsaresources.comemail: [email protected]

On Assignment26745 Malibu Hills RoadCalabasas, CA 91301818/871-3312, FAX 877/242-2346www.onassignment.comemail: [email protected]

Oxford Global Resources Inc.100 Cummings Center, Suite 206LBeverly, MA 01915800/426-9196, FAX 978/538-1617www.oxfordcorp.comemail: [email protected]

Pantheon Group Inc.P.O. Box 72Walpole, MA 02081888/844-7480 x2002, FAX 888/444-7481email: [email protected]

PDS Technical Services(please see display ad)Corporate HeadquartersP.O. Box 619820Dallas, TX 75261-9820214/647-9600, 800/270-4737, FAX 888/740-1212www.pdstech.com

—additional PDS Technical Services offices:

Anchorage, AK San Antonio, TXAtlanta, GA Santa Ana, CAAustin, TX Santa Clara, CABellevue, WA Savannah, GACharleston, SC Seattle, WAEast Hartford, CT St Louis, MOGreen Bay, WI Tampa, FLHouston, TX Tempe, AZIrving, TX Westlake Village, CA

Peak Technical Staffing USA(please see our display ad)Corporate Office583 Epsilon DrivePittsburgh, PA 15238888/888-7325, FAX 800/462-9275www.peaktechnical.comemail: [email protected]

—additional Peak Technical offices:Horsham, PA Oceanside, CAIrvine, CA Sunnyvale, CALombard, IL Troy, MINew York, NY Woodland Hills, CACalgary, ON, Canada

Precision Personnel Inc.600 Cleveland Street, Suite 700Clearwater, FL 33755727/449-0600, 877/600-2333, FAX 727/449-0627www.precisionpersonnel.comemail: [email protected]

Precision Resource Company Inc.P.O. Box 318Sharon, MA 02067888/431-6300, FAX 888/431-6301www.prcnational.comemail: [email protected]

Productive Data Solutions6870 West 52nd Avenue, Suite 107Arvada, CO 80002303/220-7165, FAX 303/220-7425www.pdsinc.comemail: [email protected]

RCM Technologies Inc.(plese see our display ad)1 Waterview Drive, Suite 204Shelton, CT 06484-4368203/225-5700, FAX 203/377-6298www.rcmt.comemail: [email protected]

Remx Specialty Staffing42231 6th Street West, Suite 205Lancaster, CA 93534888/872-2505, FAX 877/897-8722www.remxengineering.comemail: [email protected]

Softworld Inc.281 Winter Street, Suite 301Waltham, MA 02451781/373-8453www.softworldinc.comemail: [email protected]

Source Group Professionals Inc.4729 E. Sunrise Drive, Suite 244Tucson, AZ 85718888/352-8797, FAX 866/835-2145www.sourcegrouppros.comemail: [email protected]

Southern Design Services Inc.155 Tradd StreetSpartanburg, SC 29301864/278-5000, 888/697-3869, FAX 864/278-5005www.southerndesigninc.comemail: [email protected]

Spencer Reed Group100 Oceangate, Suite 900Long Beach, CA 90802310/353-2363, 888/774-9998, FAX 310/353-2366www.spencerreed.comemail: [email protected]

SRI Technologies1250 Bank DriveSchaumburg, IL 60173847/330-1222, FAX 847/330-1411www.sritalent.comemail: [email protected]

Strom Aviation IncorporatedP.O. Box 460328Aurora, CO 80046303/740-7400, 800/377-9246, FAX 303/740-7414www.stromaviation.comemail: [email protected]

Strom Engineering Corp.Corporate Headquarters10505 Wayzata BoulevardMinnetonka, MN 55305952/544-8644, 800/205-8732, FAX 952/544-2451www.stromengineering.comemail: [email protected]

STS Engineering Solutions LLC2000 NE Jensen Beach BlvdJensen Beach, FL 34957Phone & FAX 877/707-5767www.stsengineering.comemail: [email protected]

TASC Technical ServicesP.O. Box 1315Plaistow, NH 03865603/382-1114, 877/304-8272, FAX 603/382-2377www.tasctech.comemail: [email protected]

TDM Technical Services(please see our display ad)3924 Chesswood DriveToronto, ON M3J 2W6, Canada416/777-0007, FAX 416/777-1117www.tdm.ca, email: [email protected]

Technology Plus Inc.3430 McKelvey Road, Suite IBridgeton, MO 63044314/298-8887, 800/910-5554www.tplusinc.com, email: [email protected]

Technology Plus Inc.P.O. Box 439Valley Head, AL 35989256/657-7425, 800/233-3449, FAX 816/795-7752www.tplusinc.comemail: [email protected]

Tech Resources LLC537 Warren AvenueSt Louis, MO 63130314/862-2090email: [email protected]

Tech USA LLC8334 Veterans HighwayMillersville, MD 21108410/846-9020, FAX 410/729-4341www.techusa.net, email: [email protected]

Terra Staffing Group1101 BroadwayTacoma, WA 98402206/538-6789www.terrastaffinggroup.comemail: [email protected]

TES-The Employment Solution6600 TransCanada Highway, Suite 340Pointe-Claire QC H9R 4S2, Canada514/426-0121, FAX 514/426-1790www.tes.netemail: [email protected]

The Talley Group Inc.2507 147th Place SEMill Creek, WA 98012425/753-5061, FAX 425/645-7845www.thetalleygroup.comemail: [email protected]

Total Technical Services225 Wyman Street, 1st FloorWaltham, MA 02451781/790-7900, 800/572-0753, FAX 888/887-6285www.total-tech.comemail: [email protected]

Triad Worktek(please see our display ad)23801 Calabasas Road, Suite 2022Calabasas, CA 91302818/222-6811, 800/820-6811, FAX 818/222-0116www.worktek.comemail: [email protected]

TriMech Services LLC4461 Cox Road, Suite 302Glen Allen, VA 23060804/257-9965, FAX 804/257-7945www.trimechservices.comemail: [email protected]

Two Roads Professional Resource Inc.5122 Bolsa Avenue, Suite 112Huntington Beach, CA 92649714/901-3804, 877/4-2ROADS, FAX 714/901-3814www.2roads.comemail: [email protected]

Universal Software Corporation1 Olde North Road, Suite 303Chelmsford, MA 01824-1453978/770-2200, FAX 978/221-5752www.universal-sw.comemail: [email protected]

USA Staffing Services LLC5510 W La Salle Street, Suite 205Tampa, FL 33607877/312-8964, FAX 877/406-3349www.usastaffingservices.comemail: [email protected]

USA-Universal Services Associates Inc.500 Ellis AvenueColwyn, PA 19023-2725610/461-0300, 800/724-6120, FAX 610/461-0405www.buildwithusa.comemail: [email protected]

Volt Services Group(please see our display ad and online banner)1002 15th Street SW, Suite 212Auburn, WA 98001-6502253/733-3060, 888/307-4243, FAX 253/838-1384www.jobs.volt.comemail: [email protected]

—additional Volt Services Group offices:

Fort Worth, TX San Diego, CAOrange, CA Wichita, KSPhoenix, AZ

Yoh Services(please see our display ad)14323 S Outer 40, Suite 484Chesterfield, MO 63017314/878-0666, 800/298-0666, FAX 314/878-3313www.jobs.yoh.comemail: [email protected]

—additional Yoh offices:

Bellevue, WA Westminster, COPhoenix, AZ

C.E. Weekly August 20, 2014 – A-3

JOBLINES – Continued from Page A-2

Assignment Contract Firm/ Per Over- Expected Expected * SeeJob Classification, Description Location Office to Contact Rate Diem time Duration Start Date Page

Electrical Designer—prepare design layouts Everett, WA Comforce/Bellevue open poss poss LT ASAP 13

Electrical Designers—prepare documentation/des changes Everett, WA PDS/Tukwila 60/hr poss poss 4 mos ASAP 2

Electrical Engineer—heavy industrial/steel mill Ghent, KY Tech Plus/Valley Head — split — LT — Index

Electrical Engineers—mining/refinery/oil and gas New Orleans, LA Tech Plus/Valley Head — split — LT — Index

Electrical Power Engineer—large terminal exp pref Ashland, KY Tech Plus/Valley Head — split — — ASAP Index

Electronic Design & Analysis Engineer—microelectronics Huntington Bch, CA Volt/Auburn 70/hr — — 4 mos ASAP Front

Engineer—entry level/BSEE minimum New Orleans, LA Tech Plus/Valley Head — split — LT — Index

Field Piping Designer—field work at refinery El Dorado, KS Tech Plus/Valley Head — split — — — Index

Flight Controls Engineer—fly-by-wire Georgia Precision Pers/Clearwater 70-80/hr yes yes 1 year+ ASAP Index

Flight Test Engineer—FAA/EASA regs Vero Beach, FL STS Engrg/Jensen Beach DOE poss poss 8 mos+ ASAP Index

Flutter and Dynamic Loads Engineer Savannah, GA Precision Pers/Clearwater 70+/hr yes yes 1 year+ ASAP Index

Human Resouce Generalist Ft Worth, TX Inconen/Culver City 29.80+hr spilt poss 10 mos ASAP 12

IADS Programmer/Engineer Savannah, GA Inconen/Culver City 45+/hr split poss LT ASAP 12

IT Analyst Aurora, IL Spencer Reed/Long Beach to 50/hr poss poss LT ASAP Index

Inspection Supervisor—measurements/audits/inspections St Louis, MO Apollo/Wildwood DOE split poss LT ASAP 6

Integration Engr—USAF/DOD depot aircraft mod process Warner Robins, GA STS Engrg/Jensen Beach DOE poss poss — ASAP Index

Interiors Engineer—drawings/ECOs OK/TX Agente/Colleyville 50-60/hr split poss LT ASAP Index

Lead Power Process Engineer—boiler/chemical recovery Birmingham, AL Tech Plus/Valley Head — split — — ASAP Index

Liaison Engineer—aerospace St Louis, MO Apollo/Wildwood DOE poss poss 6 mos+ ASAP 6

MRB Engineers—material review/corrective actions Wildwood, MO Apollo/Wildwood DOE split poss 6 mos+ Sept 1 6

Machinist—aerospace/Fanuc or Heidenhain controls Wheeling, IL Foster/Wichita 20-32/hr split poss contr-dir ASAP Index

Maintenance Planner—refinery only Billings, MT Foster/Wichita — poss poss 11 mos+ ASAP Index

Maintenance Programs Specialist—aircraft phase-ins Purchase, NY STS Engrg/Jensen Beach DOE poss poss — ASAP Index

Manufacturing Engineer Phoenix, AZ Yoh/Chesterfield 26/hr split poss 6 mos — 8

Manufacturing Engineer I Fairfield, CA Inconen/Culver City 33/hr split poss 6 mos ASAP 12

Manufacturing Engineer—BSME/titanium and aluminum exp Santa Ana, CA Volt/Auburn to 75K — — direct ASAP Front

Manufacturing Engineers Tullahoma, TN Spencer Reed/Long Beach to 45/hr poss poss 6 mos ASAP Index

Mechanical Designer—aerospace/defense SanDiego, CA Ingenium/Rockford — — poss 12-18 mos ASAP Index

Mechanical Engineer Irvine, CA Midcom/Anaheim 40-55/hr — — 6 mos — Index

Mechanical Engineer—BS degree/power plants/gas turbine Kansas City, MO Tech Plus/Valley Head — yes poss 6 mos ASAP Index

Mechanical Engineers—pipe sizing/P&IDs/isometrics New Orleans, LA Tech Plus/Valley Head — split — — — Index

Numerical Control Programmers—UG NX 7.5 San Diego, CA Volt/Auburn 35-40/hr — — 12 mos ASAP Front

PDS Piping Designers Kansas City, MO Tech Plus/Valley Head — split — — — Index

Pipeline Engineer Denver, CO Adecco/San Diego 60/hr no poss 2 yrs ASAP Index

Piping Designer Southfield, MI Softworld/Waltham 35-40/hr poss no — ASAP Index

Piping Designer—AutoCAD and-or Microstation Ashland, KY Tech Plus/Valley Head — split — — ASAP Index

Piping Designer—drawings for construction/isos Wichita, KS Foster/Wichita — no poss 11 mos+ ASAP Index

Power Plant Engineer—OEM engineering data Purchase, NY STS Engrg/Jensen Beach DOE poss poss — ASAP Index

Powerplant Engineer—AutoCAD/aviation industry Memphis, TN STS Engrg/Jensen Beach DOE poss poss — ASAP Index

Principal Engineer—mechanical system structures Torrance, CA Nesco/Lake Mary 66.50/hr poss poss LT ASAP Index

Principal Project Management Specialist Phoenix, AZ On Assignment/Calabasas 60-67/hr split — 2 yrs Aug 18 Index

Process Engineer—BS or Masters degree in chemical engr Raleigh, NC Tech Plus/Valley Head — split — — — Index

Process Engineer—aerospace parts/tooling St Louis, MO Apollo/Wildwood DOE poss poss 6 mos+ ASAP 6

Procurement Administration—quotations and proposals Tulsa, OK Foster/Wichita 29-31/hr no poss 3-6 mos+ ASAP Index

Procurement Scheduler—industrial or chemical exp Louisville, KY Tech Plus/Valley Head — split — — ASAP Index

Project Engineer—aerospace parts St Louis, MO Apollo/Wildwood DOE poss poss 6 mos+ ASAP 6

Propulsion Engineer—ME-AE preferred Midwest Agente/Colleyville 57/hr — — 1 year ASAP Index

Quality & Continuous Improvement Manager Greenville, SC Hi-Tec Prof/Marietta 125K no no direct ASAP Index

A-4 – August 20, 2014 C.E. Weekly

Assignment Contract Firm/ Per Over- Expected Expected * SeeJob Classification, Description Location Office to Contact Rate Diem time Duration Start Date Page

Quality Control Specialist/CWI—industrial pharmacy Augusta, GA Tech Plus/Valley Head — split — — ASAP Index

Quality Engineer—aerospace Chicago, IL Adtl Tech/Framingham 34-36/hr yes poss 4-6 mos+ ASAP Index

Quality Engineers—aerospace parts St Louis, MO Apollo/Wildwood DOE poss poss 6 mos+ ASAP 6

Quality Manager—dimensional and ultrasonic inspection Houston, TX Hi-Tec Prof/Marietta 110K no no direct ASAP Index

Scheduler—aerospace parts and assemblies St Louis, MO Apollo/Wildwood DOE poss poss 6 mos+ ASAP 6

Scheduler—piping/mechanical/P6 Augusta, GA Tech Plus/Valley Head — split — — ASAP Index

Secondary Structures/Electrical Brackets Greensboro, NC Precision Pers/Clearwater 50-55/hr yes yes 1 year+ ASAP Index

Software Engineers—Real-Time/active secret clearance St Louis, MO PDS/St Louis 65+/hr poss poss 12 mos+ ASAP 2

Software/Systems Engineers—Primus Epic exp a plus Tempe, AZ Enea/Tempe DOE yes yes 9-12 mos — Index

Sr Civil/Structural Engineer—chemical/plant/refining Ashland, KY Tech Plus/Valley Head — split — — — Index

Sr Electrical & Instrumentation Designer—petrochemical Ponca City, OK Foster/Wichita — poss poss VLT ASAP Index

Sr Electrical Designer—CAD electrical design New Orleans, LA Tech Plus/Valley Head — split — LT — Index

Sr Liaison Engineer Everett, WA LMI/San Diego DOE poss poss — Immed Index

Sr Mechanical Design Engineer Golden Valley, MN Nesco/Lake Mary 45-58/hr poss yes LT ASAP Index

Sr Mechanical Design Engineer Golden Valley, MN On Assignment/Calabasas 45-58/hr split — 9 mos Sept 29 Index

Sr Piping Designer—heavy pharmaceutical Georgia Tech Plus/Valley Head — split — 6 mos ASAP Index

Sr Tool Designer—Unigraphics/aircraft structure mfg Santa Ana, CA Volt/Auburn to 95K — — diret ASAP Front

Sr/Lead User Experience Designer/Project Manager Phoenix, AZ Olsa Resources/Portland 50-55/hr split yes 9 mos ASAP Index

Stress Engineer—aerospace/aircraft/Nastran/Patran Tulsa, OK Apollo/Wildwood DOE poss poss LT Sept 1 6

Structural & Payload Design Engineers—3D CAD Everett, WA PDS/Tukwila 62/hr poss poss 5 mos ASAP 2

Structural & Payload Design Engineers—CATIA V5/Enovia Huntsville, AL Volt/Auburn — — — 4 mos ASAP Front

Structural & Payload Design Engineers—interior payload Everett, WA PDS/Tukwila 62/hr poss poss 5 mos ASAP 2

Structural Analysis—advanced structures analysis Tulsa, OK Foster/Wichita 68-72/hr poss poss 3-6 mos+ ASAP Index

Structural Designers Huntsville, AL PDS/St Louis 51/hr poss poss 4 mos+ ASAP 2

Structural Designers—mid-sr level/AutoCAD/PDMS New Orleans, LA Tech Plus/Valley Head — split — — — Index

Structural Liaison Engineer—AMOCs for repairs Purchase, NY STS Engrg/Jensen Beach DOE poss poss — ASAP Index

Structures DER—DER/ODA functions Texas Agente/Colleyville open split poss 6-12 mos ASAP Index

Supplier Quality Enigneer—supplier quality follow up St Louis, MO Apollo/Wildwood DOE poss poss 6 mos+ ASAP 6

Test Engineers Melbourne, FL Spencer Reed/Long Beach to 51/hr poss poss 6 mos ASAP Index

Tool Designer—Unigraphics San Diego, CA Volt/Auburn DOE — — 12 mos+ ASAP Front

Trax Data Entry—aviation maintenance programs Purchase, NY STS Engrg/Jensen Beach DOE poss poss — ASAP Index

Wire & Installation Design Engineer—cable-wire harness Everett, WA Comforce/Bellevue open poss poss LT ASAP 13

Wire Design & Installation Engineers—CATIA V5/Enovia Everett, WA Volt/Auburn 65/hr — — 4 mos ASAP Front

Wire Design & Installation Engineers—equipment racks Everett, WA PDS/Tukwila 65/hr poss poss 4 mos ASAP 2

Wire Design & Installation Engineers—wire routing Everett, WA Volt/Auburn 55/hr — — 4 mos ASAP Front

Wire Flight Control System Electronic Engineers St Louis, MO PDS/St Louis to 50/hr poss poss 6 mos+ ASAP 2

Anticip: Anticipated. Openings are anticipated at this time

ASAP: As soon as possible. Openings exist now

Contr-Dir: Assignment begins on contract basis and can become direct position

DOE: Depending on experience

Immed: Immediately. Openings exist now

Indef: Indefinite. Expected duration of assignment unknown; probably Long Term

LT: Long Term (expected assignment duration 6-12 months)

Negot: Rate range may have been determined, but your rate is to be negotiated

Ongoing: Client expects openings for this discipline on an ongoing basis

Open: The rate for this assignment has not yet been set

Poss: Possible (normally refers to overtime or per diem)

Prob: Probable (normally refers to overtime or per diem)

Split: Firm will split a portion of hourly rate into per diem (if you meet IRS reqmt)

ST: Short Term (expected assignment duration less than 6 months)

StTm/OT: Straight time for overtime

VLT: Very Long Term (expected assignment duration over 12 months)

ABBREVIATIONS AND TERMS


Contract Employment Weeklywww.ContractJobHunter.com

Mailing Address . . . . . . . . . . . . . . . . . .P.O. Box 3006, Bothell, WA 98041-3006

Overnight Deliveries . . .11711 N. Creek Pkwy. S., Suite 112, Bothell, WA 98011

Phone: (425) 806-5200 . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fax: (425) 806-5585

Email Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [email protected]

Publisher & Editor: Jerry Erickson • Managing Editor: Janice Erickson •Staff: Greg Erickson (Director of Operations), Scott Schultz (SystemsAdministrator), Marian Martin, and Karen Dennis

Some jobs advertised in C.E. Weekly are for upcoming or anticipated openings,or may be filled before you respond to the advertiser. Please notify us if you finda firm advertising upcoming positions as “Immediate.” For member onlineaccess, please contact our office for a UserID and Password.

Contract Employment Weekly (ISSN 1063-9268) ©Copyright 2014 C.E.Publications, Inc. Published every Wednesday. Most job openings are forshort or long term contract (temporary) assignments. There should never bea fee to apply for or accept any of the jobs published in C.E. Weekly. Direct(captive) positions advertised must meet the following criteria: (1) be for aposition with the advertiser’s client (unless it is for recruiting related staff);and (2) must be identified as “direct.” If you wish to apply for any positionadvertised, send a copy of your current resume to the advertising firm, notto C.E. Publications. C.E. Publications is not intended as a legal reference.Any specific problem should be referred to your attorney or accountant. Allmaterial submitted to C.E. Publications is subject to acceptance by the pub-lisher. Advertisers, authors and cartoonists agree to indemnify the publish-er from any claims or lawsuits for libel, violation of rights, copyright infringe-ment or other suits predicated on the content of copy submitted. No part ofthis publication may be reproduced or transmitted in any form by anymeans, electronic or mechanical, including photocopying, recording or byany information storage retrieval system, without written permission fromthe publisher. All returned checks subject to $5 handling fee. We reserve theright to refuse services to anyone. Services subject to change. Membershipmust be current to use our services. Sorry, no refunds.

Contract Employment Weekly ◆ ContractJobHunter

Last Name __________________________________________________

First Name _______________________________ Middle Initial______

Home Phone _______________________________________________

Cell Phone _________________________________________________

Address ______________________________________ Apt _________

City ____________________________ State _____ Zip ____________

Email________________________________________________________

❑ cash/check/money order❑ MasterCard/Visa/Amex Account # __ __ __ __ / __ __ __ __ / __ __ __ __ / __ __ __ __ Card Expires __ __ / __ __

Signature _________________________________________________________

RELEASE INFORMATION: If someone calls C.E. Publications and asks for me specifically by my name, I authorize you torelease the above information to: ❑ Anyone ❑ Contract Firms Only ❑ No One* (*If you specify “No One”, you will not beable to use the C.E. Locator Service or print C.E.’s address/phone number on your resume)

DO NOT WRITE IN THIS SPACE

UserID AND PASSWORD FOR ONLINE ACCESS:(Case sensitive, choose 4-14 alpha/numeric characters – no symbols)

UserID ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

Password ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

Payment may be made in U.S. dollars drawn on a U.S. bank, MasterCard,Visa or Amex, U.S. cash, or a Bank Draft from foreign bank. All issues are sent1st class or airmail. We do not bill for any services or publications. We mail thecurrent issue the same day payment is received. Consecutive issues only. Norefunds. Mail to: C.E. Publications, P.O. Box 3006, Bothell, WA 98041.

❑ 1 Year (with 52 print issues) . . . . . . . . . . . . . . . . . . . . . . . . . . .$50❑ Seniors renewal only (for seniors 62+ with proof of age) . . .$45

❑ 12 Weeks (with 12 print issues) . . . . . . . . . . . . . . . . . . . . . . . .$30

❑ Current Single Issue of C.E. Weekly . . . . . . . . . . . . . . . . . . . . .$4

All print subscriptions also include online access for full duration at ContractJobHunter.com

❑ 1 Year Online-Access Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25

Rates to Canada or Mexico addresses:❑ 1 Year (with 52 print issues) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$60

❑ 12 Weeks (with 12 print issues) . . . . . . . . . . . . . . . . . . . . . . . . . .$35

❑ Current Single Issue of C.E. Weekly . . . . . . . . . . . . . . . . . . . . . . .$5

Rates to U.S. addresses:(For Washington state add 9.5% sales tax)

When members first enter a new resume

into our online database, you can choose

to have us email it to all current advertis-

ers. Recruiters select to receive all new

resumes, submit keywords to receive

only selected resumes, or receive no

resumes at all. Each time you update

your resume, you can once again choose

to have us email your resume. The

default is set to not distribute the resume;

only members who check the box for dis-

tribution will have their resume emailed.

Daily ResumeDistribution

CE Services

FIRST-CLASS MAIL

CE Publications, Inc.P.O. Box 3006Bothell, WA 98041-3006

JURISDICTION ANDJURISDICTION ANDCLASSIFICATION ANALYST (ITAR)CLASSIFICATION ANALYST (ITAR)

-- STRATFORD, CONNECTICUT ---- STRATFORD, CONNECTICUT --The primary responsibility of this role will be to perform Jurisdiction and Classification (J&C) in Sikorsky’sPLM systems in accordance with the ITAR and/or EAR of hardware, tech data, software and defensesystems. Interact daily with engineering, operations, purchasing and SAS to address J&C items.

Mandatory Skills: Must have technical/engineering experience • Must have export compliance(ITAR/EAR) experience • Must be adept in navigating through the MS Office Suite and be able to han-dle a high volume of requests efficiently to meet internal customer demands

Nice to Have Skills: Knowledge of Sikorsky’s Matrix-One, ERC Engineering Drawings and specs.Knowledge of typical business processes (i.e., procurement, proposal preparation, program manage-ment) and production support would be helpful.

PRIMARY AND SECONDARYPRIMARY AND SECONDARYSTRUCTURES DESIGN & ANALYSISSTRUCTURES DESIGN & ANALYSIS

-- MIDWEST ---- MIDWEST --UG Designers with 4-7 years experience, Stress Analysts with 7+ years experience, Nastran/Patranrequired. Active or recently inactive secret clearance required

Harry Pember at (203) 225-5705 • [email protected] Burroughs at (203) 225-5714 • [email protected]

Please

contact

ARE YOU UNEMPLOYED?

Documents

Transcript of ARE YOU UNEMPLOYED?