Architecture 2011 Summer
-
Upload
george-cristian-ursache -
Category
Documents
-
view
223 -
download
0
Transcript of Architecture 2011 Summer
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 1/32
A magazine for puand institutionaladministrators
Un magazine à l’ides donneurs d’oupublics et institut
ArchitectureEducation projectszero in on 2030 Challenge
mmer/Fall 2011/Automne 2011
Le milieu de l’éducationtrace la voie pour releverle Défi 2030
The Royal Architectural Institute of Canada
www.raic.org
L’institut royal d’architecture du Canada
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 2/32
See Marvin in commercial solutions everywhere. Experience innovative products that are built around your
commercial needs. Our experts work with you to create design solutions using our broad range of durable and energy
efficient products and technical services to help you bring your vision to life.
See for yourself. See marvin.com/commercial.
© 2009 Marvin Windows and Doors. All rights reserved.
® Registered trademark of Marvin Windows and Doors.
flexibility
customsolutions
provenperformance
see
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 3/32
If energy
conservation is a
major goal for your next
project, Varco Pruden Buildingscan help you meet your sustainable
construction plans. VP's SuperBlock™ system
is a unique, proprietary insulation system that delivers
superior performance in thermal protection. Hot box tested
and veri ed, SuperBlock’s uniquely designed thermal block and
berglass insulation, coupled with VP's standing seam roof, deliver in
place U-values as low as .043. VP also offers long-life KXL nish colors designed to meet
high-slope and low-slope cool roof standards. Cool!
Visit www.VP.com/ad/rca3 for more information about
Varco Pruden Buildings’ green building solutions.
• Recycled Material Content • Advanced Engineering Solutions • Cool Paint Finishes
• End-of-Use Recyclability • Passive Lighting Panels • Member USGBC
• Energy Eff icient Insulation • Energy Star Rated Products
Roof Solutions With Maximum
Thermal Protection
From Varco Pruden
©2011 Varco Pruden Buildings® is a division of BlueScope Buildings North America, Inc. All rights reserved.
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 4/32
THE STANDARD OF COMPARISON
www.beldenbrick.com / [email protected] / (330) 456-0031
An ISO 9001:2008 Registered Quality Management System
“The Standard of Comparison Since 1885”
It has been long known that brick provides durability,
energy efficiency and is maintenance free. The
Belden Brick Company has been the industry leader
in quality brick products for the last 125 years.
Belden Brick offers the widest selection of brick
products in the industry with a combination of more
than 500 colors, textures, sizes and special shapes.
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 5/32
Head
■ 5
Head
A magazine for public and institutional administratorsUn magazine à l’intention des donneurs d’ouvrage publics et institutionnels
w w w . r a i c . o r g S u m m e r / F a l l 2 0 1 1É t é / A u t o m n e 2 0 1 1
on page 17 / à la page 19
7 Architecture Canada | RAIC – the
leading voice of architecture in Canada!
10 Education projects zero in on 2030
Challenge
13 Building on Erickson’s green legacy
17 Energy efficiency makes the grade
21 Coal Age site spawns low-carbon centre
25Reducing costs through Good Design
30 Index to Advertisers
9 Architecture Canada | IRAC – le principal porte-parole de
l’architecture au Canada!
011 Le milieu de l’éducation trace la voie
pour relever le Défi 2030
015 Sur les traces d’Erickson
019 Une réussite magistrale sur le plan de
l’efficacité énergétique
023 Aucune émission de carbone sur un site du carbonifère
025 Un bon design pour réduire les coûts
030 Index des annonceurs
on page 13 / à la page 15
Table of Contents / Table des matières
©2011 Naylor (Canada), Inc. All rights reserved.
The contents of this publication may not be reproduced by any means,
in whole or in part, without the prior written consent of the publisher.
©2011 Naylor (Canada), Inc. Tous droits réservés.Le contenu de cette publication ne peut être reproduit, en tout ou en partie,
de quelque façon que ce soit, sans la permission écrite de l’éditeur.
On the cover / En page couverture :
Simon Fraser University Arts and Social Sciences Complex /
Le complexe des arts et des sciences sociales de l’Univer sité Simon
Architect : Busby Perkins+Will Architects Co.
Photo : Busby Perkins+Will Architects Co.
For detailed information about the 2030 Challenge,
please visit w ww.raic.org.
Pour de plus amples renseignements sur le Défi 2030,
veuillez consulter le www.raic.org.
VIEW THIS ISSUE AND PAST ISSUES OF ARCHITECTURE ONLINE ANYTIME AT WWW.RAIC.ORG/RESOURCES_ARCHIVES/MAGAZINE/INDEX_E.HTM
POUR CONSULTER EN LIGNE CE NUMÉRO ET LES NUMÉROS ANTÉRIEURS D’ ARCHITECTURE : WWW.RAIC.ORG/RESOURCES_ARCHIVES/MAGAZINE/INDEX_F.HTM
Publisher / Éditeur :Robert Phillips
Project Manager /
Directrice des travaux :Alana Place
Executive Director /Directeur général : Jim McKee
Editor / Rédactrice en chef :Sylvie Powell
Editor / Rédactrice :Lisa Gordon
Translator / Traductrice :France Jodoin
Advertising Sales Manager /Directeur des ventes :Anook Commandeur
Account Representatives /
Représentants des ventes :Anook Commandeur Bill Biber Blair Van CampBrenda EzinickiCheryll OlandDarryl SawchukKaren DonstonMaria AntonationRalph Herzberg Robyn Mourant
Art Direction /Direction artistique :Sharon Lynne, Ravijot Singh
Design Lead /Concepteur principal : Jatin Arora
Layout & Design /Mise en pageet conception graphique :Indrajit Mukherjee
Published for /Publié pour le compte de : Architecture Canada330-55 rue Murray Street Ottawa, Ontario K1N 5M3
(613) 241-3600
(613) 241-5750
www.raic.org
Published by / Publié par :
Naylor (Canada), Inc.100 Sutherland AvenueWinnipeg, MB R2W 3C7
(204) 947-0222
(204) 947-2047
www.naylor.com
CANADIAN PUBLICATIONSMAIL AGREEMENT #40064978Published May 2011/RAI-B0111/5585Publié mai 2011/RAI-B0111/5585
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 6/32
w w w .
r a i c .
o r g
/
2 0 1 1
6 ■ ARCHITECTURE CANADA
Conseil d’administration 2011
Administrateurs régionaux Wayne De Angelis, MRAICColombie-Britannique / Yukon
R. Wayne Guy, FRAICAlberta / Territoires-du-Nord-Ouest
Charles Olfert, MRAIC
Saskatchewan / Manitoba Allan Teramura, MRAICOntario Nord, Est et Nunavut
Leslie Klein, FRAICOntario Sud, Ouest
Jean-Pierre Pelletier, FIRACQuébec
Paul E. Frank, FRAICAtlantique
Alexander Rankin, FRAICChancelier du Collège des fellows
Kendra Schank Smith
Présidente, Conseil canadiendes écoles universitairesd’architecture
W. Steve Boulton, MRAICConseiller représentant les stagiaires et architectesstagiaires
Regional Directors Wayne De Angelis, MRAICBritish Columbia / Yukon
R. Wayne Guy, FRAICAlberta / Northwest Territories
Charles Olfert, MRAICSaskatchewan / Manitoba
Allan Teramura, MRAICOntario North, East and Nunavut
Leslie Klein, FRAICOntario Southwest
Jean-Pierre Pelletier, FIRACQuébec
Paul E. Frank, FRAICAtlantic
Alexander Rankin, FRAICChancellor, College of Fellows
Kendra Schank SmithChair, Council of CanadianUniversity Schools of Architecture
W. Steve Boulton, MRAICIntern & Intern Architect Representative
2011 Board of DirectorsPresident Stuart Howard, FRAIC
First Vice-President / President-Elect
David Craddock, MRAICSecond Vice-President Paul E. Frank, FRAIC
Immediate Past-President Ranjit (Randy) K. Dhar, FRAIC
Président Stuart Howard, FRAIC
1er vice-président / président éluDavid Craddock, MRAIC
2evice-président
Paul E. Frank, FRAIC
Ancien président Ranjit (Randy) K. Dhar, FRAIC
415794_Euclid.indd 1 1/19/09 7:26:34 PM
Hide-A-HoseCentral Vacuum Systems
NOCENTRAL VAC
HOSES TOCARRY!
LEEDCERTIFIED
TRUE CYCLONIC | SINCE 1954 | SPECIALIZE IN SMALL CONDOS,LARGE CUSTOM HOMES & COMMERCIAL BUILDINGS
416-445-6886 | 1-800-313-3778
RETRACTABLEHOSE VIDEO
CYCLONICVACS.COM
FREEON-SITE
ESTIMATES!!
524522_Vacuflo.indd 1 3/30/11 8:49:39 PM
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 7/32
ARCHITECTURE CANADA ■ 7
The Royal Architectural Institute o Canada, established in 1907, is ast
becoming known by its new name – Architecture Canada. Architecture
Canada | RAIC remains a voluntary national association representing
more than 4,200 architects, aculty and graduates o accredited
Canadian Schools o Architecture rom every region o the country. It
provides the national ramework or the development and recognition o
architectural excellence.
Vision
To build awareness and appreciation o the contribution o architecture
to the physical well-being and cultural development o Canada.
Mission
• To afrm that architecture matters;
• To celebrate the richness and diversity o architecture in Canada; and
• To support architects in achieving excellence.
Architecture Canada | RAIC is the leading voice o architecture in
Canada.
Values
Integrity – Architecture Canada | RAIC conducts all its activities with the
highest ethical and proessional standards;
Environmental Responsibility – Architecture Canada | RAIC actively
promotes sustainable design and operates in the most environmentally
sustainable manner possible;
Inclusiveness – Architecture Canada | RAIC acts as a ‘rassembleur’ and
all sta and programs operate to create and maintain a common ground
or architecture students, intern architects, architects in practice, retired
architects and proessional organizations in Canada;
Eectiveness – Architecture Canada | RAIC programs are established
with clear and measurable objectives that will bring beneft to members,
enhance the proession o architecture, and improve the quality o the built
environment in Canada. Membership
Members include Licensed (or Registered) Architects, Architectural
graduates, Intern Architects or Interns, as well as ull-time aculty
members o a University School o Architecture. Architects who reside
outside Canada can become International Associates. Architects who
have graduated outside Canada and reside here in Canada may make
a special application to be considered or ull membership. A ull-time
student rom an architectural program in a Canadian accredited University
School o Architecture or in the Syllabus program can become a Student
Associate. Also, those who are involved in the Design and Construction
Industry and who are associated with the architectural proession can
become Afliates.
Architecture Canada | RAIC –the leading voice o architecture in Canada!
Beneits include
• For ull members, the MRAIC (Member o the Royal Architectural
Institute o Canada) and FRAIC (Fellow o the Royal Architectural
Institute o Canada) designations.
• Access to quality proessional development programs, practice
support documents, Architecture Canada | RAIC Committees and
Working Groups, and international activities (such as Marmomacc and
UIA Working Groups).
• A listing in both the national Architecture Canada | RAIC printed and
online Member Directories.
• Monthly electronic Bulletin oering the latest inormation about the
proession o architecture across Canada.
• Part o the mission o Architecture Canada | RAIC is the “development
o excellence” and this is achieved through both Practice Support and
Proessional Development.
Practice Support
Architecture Canada | RAIC provides a variety o documents that help
Architects in their day-to-day practices, including:
• The Canadian Handbook o Practice or Architects (CHOP) Second
Edition;
• Standard contract documents such as Document Six - the Canadian
Standard Form o Agreement Between Client and Architect and other
contract documents;
• The sale and distribution o industry documents prepared by theCanadian Construction Documents Committee (CCDC), books and
materials, and the National Master Specifcation.
Proessional Development
Architecture Canada | RAIC is committed to producing a quality
proessional development program and to ensure, to the extent
possible, that all courses receive credits rom the provincial and territorial
associations o Architects and rom the American Institute o Architects.
A Greener Canada
Architecture Canada | RAIC has consistently led the charge toward a
more sustainable built-environment – incubating the establishment o the
Canada Green Building Council; and developing the Sustainable Design
or Canadian Buildings (SDCB) series or architects; emphasizing the
importance o lie-cycle costing and ways to educate building owners
about the importance o long-term operating and maintenance costs in all
management and design decisions.
Architecture Canada | RAIC is part o the 2030 Challenge – a global
initiative calling or an immediate reduction in greenhouse gas emissions
and energy consumption in all new buildings and major renovations.
The goal is that by 2030 all new buildings and major renovations be
carbon-neutral – generat ing as much energy as they consume. ■
www.raic.org
RAIC
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 8/32
From the simplest of ideas,
comes our advanced off-site building technology.Sophistication, strength, speed and sustainability are
the four cornerstones of buildings by NRB. Designed
to meet your exact architectural needs, our advanced
building technology and project delivery method gives
you the permanence and performance of conventional
construction, but in half the time.
Building in our controlled environment means better
waste management, less downtime and improved quality
during construction. When an NRB building arrives at
your site it is up to 90% complete. This means less
on-site construction time and activity for cleaner and
safer sites with minimal disturbance to staff, customers
and the surrounding community.
Find out all your possibilities today, call 1-888-897-7083
NRB Inc. 115 South Service Road W., P.O. Box 129, Grimsby, Ontario L3M 4G3
NRB (USA) Inc. 440 Wenger Drive, Ephrata, PA 17522 Web: www.nrb-inc.com Email: [email protected]
BUILD OFF-SITE... SIMPLIFY YOUR CONSTRUCTION
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 9/32
ARCHITECTURE CANADA ■ 9
Architecture Canada | IRAC – le principalporte-parole de l’architecture au Canada!Fondé en 1907, l’Institut royal d’architecture du Canada, maintenant connu
sous le nom d’Architecture Canada, est une association nationale à adhé-sion volontaire. Il représente plus de 4,200 architectes provenant de toutes
les régions du pays, ainsi que des proesseurs et des diplômés des écoles
d’architecture agréées du Canada. Il ore le cadre national au développe-
ment et à la reconnaissance de l’excellence en architecture.
VisionFaire mieux connaître et apprécier la contribution de l’architecture à la
prospérité matérielle et au développement culturel du Canada.
Mission• Afrmer l’importance de l’architecture;
• Célébrer la richesse et la diversité de l’architecture au Canada;
• Aider les architectes à atteindre l’excellence.
Architecture Canada | IRAC est le principal porte-parole de l’architecture
au Canada.
ValeursIntégrité – Architecture Canada | IRAC mène toutes ses activités selon les
normes éthiques et proessionnelles les plus élevées;
Responsabilité environnementale – Architecture Canada | IRAC ait active-
ment la promotion de la conception durable et exerce ses activités dans le
plus grand respect possible de l’environnement;
Inclusivité – Architecture Canada | IRAC agit comme un rassembleur. Tous
les employés et les programmes visent à en aire un lieu permanent deconvergence pour les étudiants et les stagiaires en architecture, les architec-
tes en exercice et les retraités ainsi que les organisations proessionnelles
au Canada;
Efcacité – les programmes sont conçus et mis en œuvre avec des objectis
clairs et mesurables. Ils procurent des avantages aux membres, valorisent la
proession et améliorent la qualité de l’environnement bâti au Canada.
MembresLes eectis d’Architecture Canada | IRAC se composent d’architectes,
de diplômés en architecture, de stagiaires et de proesseurs à temps
plein des écoles universitaires d’architecture. Un architecte qui réside à l’ex-
térieur du Canada peut s’inscrire à titre d’associé international. Celui qui
est diplômé de l’étranger et qui réside au Canada peut quant à lui présenter
une demande spéciale d’être reconnu à titre de membre à part entière. Un
étudiant inscrit à temps plein dans un programme d’architecture d’une école
universitaire d’architecture agréée ou dans le programme Syllabus de l’IRAC
peut s’inscrire à titre d’étudiant associé. En outre, les personnes physiques
ou morales qui œuvrent dans l’industrie du design et de la construction et
qui ont des liens avec le milieu de l’architecture peuvent s’inscrire à titre de
membres afliés.
Parmi les avantages de l’adhésion• L’autorisation, pour les membres à part entière, d’utiliser la mention
MIRAC (membre de l’Institut royal d’architecture du Canada) ou FIRAC
(ellow de l’Institut royal d’architecture du Canada).• L’accès à des programmes de perectionnement proessionnel de qua-
lité, la participation à des comités ou groupes de travail d’Architecture
Canada | IRAC et à des activités internationales (p. ex. : Marmomacc et
groupes de travail de l’UIA).
• L’inscription au répertoire national en ligne et au répertoire imprimé des
membres d’Architecture Canada | IRAC.
• Le bulletin électronique mensuel qui ore l’inormation la plus récente
sur la proession, à la grandeur du pays.
• La mission d’Architecture Canada | IRAC porte en partie sur le « dé-
veloppement de l’excellence » et l’organisme s’en acquitte par l’élabo-
ration d’outils d’aide à la pratique et d’activités de perectionnement
proessionnel.
Aide à la pratiqueArchitecture Canada | IRAC ore divers documents conçus pour aider les
architectes dans l’exercice quotidien de leur proession, notamment :
• le Manuel canadien de pratique de l’architecture 2eédition;
• les documents contractuels normalisés, tels que le Document Six – la
ormule canadienne normalisée de contrat entre client et architecte et
d’autres types de documents contractuels;
• la vente et la distribution de documents de l’industrie préparés par le
Comité canadien des documents de construction (CCDC), de livres et
de divers autres documents, de même que du Devis directeur national.
Perectionnement proessionnelArchitecture Canada | IRAC est déterminé à élaborer un programme de
perectionnement proessionnel de qualité et à assurer, dans la mesure du
possible, que tous les cours oerts soient reconnus par les ordres provin-
ciaux et territoriaux d’architectes, dans le cadre de leurs programmes de
ormation continue obligatoire, et par l’American Institute o Architects.
Un Canada plus vertArchitecture Canada | IRAC a toujours joué un rôle de che de fle pour
ce qui est d’améliorer la durabilité de l’environnement bâti. Il a participé à la
création du Conseil du bâtiment durable du Canada; il a élaboré les cours
de la série Développement durable des bâtiments au Canada (DDBC), à
l’intention des architectes; il a insisté sur l’importance du coût sur le cycle
de vie et sur les açons de sensibiliser les propriétaires immobiliers afn
qu’ils tiennent compte des coûts d’exploitation et d’entretien à long terme
lorsqu’ils prennent des décisions relatives à la conception et à la gestion de
leurs immeubles.
Architecture Canada | IRAC participe au Déf 2030 – une initiative mondiale
qui vise dès maintenant la réduction des émissions de gaz à eet de serre et
de la consommation énergétique de tous les nouveaux bâtiments et des bâti-
ments aisant l’objet de rénovations majeures. L’objecti ultime du Déf est d’as-
surer la neutralité en carbone de tous ces bâtiments d’ici 2030 – c’est-à-dire
que tous ces bâtiments produisent autant d’énergie qu’ils en consomment. ■
www.raic.org
IRAC
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 10/32
w w w .
r a i c .
o r g
/
2 0 1 1
10 ■ ARCHITECTURE CANADA
The 2030 Challenge is a plan o action to reduce the negative im-pact o buildings on the environment as aggressively and immediatelyas we can. It has evolved as a balance between reasonable fnancialinvestment in construction and technology and the motivation tocreate net zero energy buildings and environments.
Architecture Canada | RAIC has been a strong advocate or energy conservation or decades, and endorsed the 2030 Challengein November 2006. Ater years o RAIC eort that includednurturing the Canada Green Building Council (CaGBC), the ArchitectureCanada 2030 Committee is energized by the conservation activity incommercial buildings across this country. I personally have becomewildly optimistic about the political and grassroots interest in net zeroenergy.
The three educational projects in this magazine represent a ractiono the incredible work that is going on in Canada. In British Columbiawe look at the fne example o Simon Fraser Universit y’s Arts and SocialSciences Complex (ASSC). The École Lawrence Grassi School in theoothills at Canmore proves that conservation and good design thrivein Alberta. And the Joggins Fossil Centre demonstrates considerablerespect or the Bay o Fundy landscape. The Canadian collective o orward thinking individuals that are planning schools, universities andother institutions are to be congratulated, and emulated; the utureappears to be getting brighter.
Education projects
zero in on 2030 ChallengeBy Graham Murfitt, MRAIC
Architecture Canada | RAIC, 2030 Coordinator
Construction in Canada is going through a major transormationon many ronts. Buildings are being designed and built using new three-dimensional technologies and building teams o clients,contractors, engineers and architects are working more closelytogether than ever beo re. When we are planning net zero buildings andcommunities, we need the intellectual resources o everyone and it isnot surprising that educational acility planners are leading the way inCanada.
The olks planning and building educational institutions havefgured out that it is a much better investment to build an excellent building than having to renovate one 30 years down the road. Andthey get that the savings over the lie o the building more thanmake up or the investment in the planning stages. I am even moreoptimistic that in these buildings our uture generat ions will be educatedabout our energy ootprint and what sustainability really means.
The Canada Green Building Council and the LEED program havesignifcantly raised awareness and interest in the objective o sustainability. The CaGBC supports and promotes the project “Living Building Challenge”; this is an excellent confrmation that buildingsmust reduce their present 40 per cent energy ootprint.
With the support o the CaGBC and the “Living Building Challenge,”Architecture Canada 2030 will be advocating vigorously that buildings MUST consume 60 per cent less energ y now and 100 per cent less by the year 2030. The graduated approach o Architecture 2030appears to be both attainable and realistic and is being expanded toinclude the ootprint o construction materials.
“Cheap oil” and low energy costs are only reasons to postponesustainabilit y. We need to look at the energy and resource consumpt ion
o buildings over a more reasonable period o time—say 50 years—tosee that even at today’s low energy costs it makes economic sense toconsume 60 per cent less.
The goal o the 2030 Challenge is to reduce energy consumptionand carbon emissions o new and renovated buildings as aggressivelyand immediately as we can. There are no certifcates or points or compliance; simply a building that consumes signifcantly less energy.
The process will surely bring a vision or carbon neutrality in 2030and a deeper respect or the wonders o nature, like the Jogginsossil deposi ts. Sustainable design will be the legacy and evidence that Architecture matters…. both today and well into the uture. ■
Sustainable design will be the legacy and evidence
that Architecture matters…. both today and well into
the future.
Editorial
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 11/32
ARCHITECTURE CANADA ■ 11
du bâtiment des économies qui excèdent l’investissement additionnelà l’étape de la planifcation. Je me réjouis de voir que nos prochainesgénérations étudieront dans ces établissements et y seront sensibiliséesà notre empreinte écologique et au sens réel de la durabilité.
Le Conseil du bâtiment durable du Canada et le programme LEEDont ait mieux connaître l’objecti de la durabilité et ont suscité unvi intérêt. Le CBDCa appuie et promeut le projet Living Building
Challenge, ce qui vient confrmer que les bâtiments doivent réduire
leur empreinte énergétique actuelle établie à 40 pour cent.Avec le soutien du CBDCa et du Living Building Challenge, le
comité 2030 d’Architecture Canada entend aire valoir énergique-ment que les bâtiments DOIVENT consommer 60 pour cent moinsd’énergie dès maintenant et 100 pour cent moins d’ici l’année 2030.Cette approche progre ssiste semble réaliste et réalisable et on étendsa portée pour inclure l’empreinte des matériaux de construc tion.
Les aibles coûts du pétrole et de l’énergie ne sont que des pré-textes pour reporter la durabilité. Nous devons examiner la consom-mation d’énergie et de ressources des bâtiments sur une périodeplus raisonnable – 50 ans, par exemple – pour voir que même aux aibles coûts de l’énergie d’aujourd’hui, il est économiquement ren-table de consommer 60 pour cent moins.
Le but du Déf 2030 est de réduire la consommation d’énergieet les émissions de carbone des bâtiments neus et rénovés le plusvigoureusement et le plus rapidement possible. L’atteinte de ce but n’est pas récompensée par un certifcat ni par des points, mais ilen résulte un bâtiment qui consomme beaucoup moins d’énergie.Le processus permettra sûrement d’entrevoir ce que sera la neutra-lité en carbone en 2030 et de mieux respecter les merveilles dela nature, comme les dépôts ossilières de Joggins. La conceptiondurable sera notre legs aux générations utures et la démonstrationque l’architecture, c’est important … aujourd’hui et pour bien long-temps encore ■
Le Déf 2030 est un plan d’action visant à réduire les répercussionsnéastes des bâtiments sur l’environnement de la açon la plus éner-gique et la plus immédiate possible. Le déf, qui visait d’abord unéquilibre entre un investissement fnancier raisonnable dans la con-struction et l’utilisation de la technologie, a évolué au fl du tempset vise maintenant la création de bâtiments et de communautés àconsommation énergétique nette zéro.
Architecture Canada | IRAC est un er vent déenseur de l’économied’énergie depuis des décennies et a adhéré au Déf 2030 en no-vembre 2006. Après les années d’eorts de l’IRAC qui ont notam-ment amené l’organisme à jouer un rôle majeur dans la création duConseil du bâtiment durable du Canada (CBDCa), le Comité 2030d’Architecture Canada est dynamisé par l’essor que prend l’économied’énergie dans les bâtiments commerciaux de tout le pays. Je suispour ma part de plus en plus optimiste quant à l’intérêt croissant despoliticiens et des intervenants du domaine envers la consommationénergétique nette zéro.
Les trois projets à vocation éducative présentés dans ce maga-zine ne représentent qu’un aible échantillon du travail incroyable
qui s’accomplit au Canada. Le pavillon des arts et des sciencessociales de l’Université Fraser, en Colombie-Britannique, quant à lui,allie beauté et technologie de pointe. L’école Lawrence Grassi, dansles contreorts des Rocheuses, à Canmore, prouve que l’économied’énergie et la bonne conception sont des notions bien acquises enAlberta. Le Joggins Fossil Centre ait preuve d’un immense respect pour le paysage de la Baie de Fundy. Tous ces Canadiens avant-gardistes qui planifent les écoles, les universités et les autresétablissements d’éducation méritent qu’on les élicite et qu’on leur emboîte le pas; l’avenir est promett eur.
La construction subit une transormation majeure au Canada,et ce, sur bien des ronts. On utilise maintenant les technologiestridimensionnelles pour concevoir et construire les bâtiments et
les équipes de projet sont ormées de clients, d’entrepreneurs,d’ingénieurs et d’architectes qui collaborent entre eux plus étroite-ment que jamais. Pour planifer des bâtiments et des communautésà consommation énergétique nette zéro, il aut mettre les ressour cesintellectuelles de chacun en commun. Il n’est pas étonnant que lesplanifcateurs d’établissements d’éducation soient des ches de fle.
Les responsables de la planifcation et de la constructiond’établissements d’éducation ont déterminé qu’il était plus rentablede construire un bâtiment d’excellente qualité dès le départ que d’enconstruire un de moins bonne qualité auquel il audrait apporter desrénovations majeures après 30 ans. Ils réalisent ainsi sur la durée de vie
Le milieu de l’éducation trace la
voie pour relever le Déi 2030Par Graham Murfitt, MRAIC
Architecture Canada | IRAC, Coordonnateur du Défi 2030
La conception durable sera notre legs aux générationsfutures et la démonstration que l’architecture, c’est important … aujourd’hui et pour bien longtemps encore.
Éditorial
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 12/32
SD10 Frameless Shower Door Hardware Catalog
J A B 3 1 2 - 4 / 1 1
The CRL product line is continually evolving with the addition of NEW products as shownin the SD10 which features: Hinges, Pull Handles, Knobs, Towel Bars, Clamps, Headers,U-Channels, Tapes, Wipes and Seals, Sliding Door Kits, and most related accessories toenhance the look and functionality of your installations.
CRL Catalogs canbe ordered, viewedor downloaded atcrlaurence.ca
ISO 9001:2008 Certified
Phone (877) 421-6144 ext. 7740|
Fax (877) 262-3299
C.R. LAURENCE CANADAcrlaurence.ca | Worldwide Manufacturer and Supplier
NEW!
YOUR SOURCE FOR THE LARGEST SELECTION
OF QUALITY FRAMELESS SHOWER HARDWARE!
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 13/32
Head
ARCHITECTURE CANADA ■ 13
Daylight-Friendly Design
From the time he was a lit tle boy growing up in Vancouver, David Dove, MRAIC
wanted to be an architect, just like one o his early hometown heroes, the
legendary Arthur Erickson. But Dove never imagined that he would one day
be building on the award-winning design that frst brought the late Erickson
international acclaim.
Completed in 2008, the Simon Fraser University (SFU) Arts and Social
Sciences Complex (ASSC) designed by Busby Perkins+Will consists o two
phases: Saywell Hall, which is home to archaeology, criminology, clinical
psychology, First Nations studies and the Centre or Forensic Research,
and Blusson Hall, which houses the new Faculty o Health Sciences. Both
C-shaped buildings book-end one another and orm a large, landscaped
courtyard that osters interaction.
The solar shading strategy used by Erickson on the original buildings,
such as the Academic Quadrangle (AQ) and repetitive vertical concrete
blades, have been reinterpreted on the ASSC with vertical glass shades.
However, with Blusson Hall and Saywell Hall, the strategies are dierent
Building on Erickson’s green legacyBy Christopher Guly
All images courtesy of Busby Perkins+Will Architects Co.
All public circulation zones have floor-to-ceiling glass on
one side at a minimum.
continued on page 14
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 14/32
w w w .
r a i c .
o r g
/
2 0 1 1
14 ■ ARCHITECTURE CANADA
Daylight-Friendly Designon each elevation in response to the individual
açade’s solar orientation. On the south side o
both buildings, cantilevered concrete sunshades
exist on each oor; as they step up the building
they cantilever as a urther nod to how Erickson
massed the AQ, with the upper oors cantilevering
past the oor below to provide shading o the lower
oor. There’s also plenty o daylight or indoor
spaces, including wet laboratories, which are
traditionally closed environments. All public
circulation zones have oor-to-ceiling glass
on one side at a minimum. But to prevent
overheating inside when it’s hot outside, ritted
glass is used in combination with horizontal
external sunshades to reduce the internal heat
gain by 90 per cent.
The daylight-riendly design and the complex’s
solar shading, combined with efcient lighting
controls and mechanical eatures, reduce energy
consumption by more than 30 per cent whencompared to the national standard or a similar
building.
Low-ow ume hoods in the wet labs reduce
by 75 per cent the volume o conditioned air,
which ows through the ume hoods. Although
the air rom the ume-hood exhaust is not reused,
the heat rom it is recovered through air-handling
units on the roo. That hot air heats incoming cooler
outdoor air to reduce energy consumption.
Elsewhere, thermal mass ound in the
concrete structure collects heat during the day
and releases it in the cool o the evening, thereby
reducing the cooling load during the day.
Along with the incorporation o natural
ventilation and the use o recovered waste heat,
90 per cent o the ASSC has a green roo or
is landscaped to lower the buildings’ heating
and cooling loads as well as to reduce energy
consumption and storm runo.
Furthermore, air in the lecture halls is supplied
through an under-oor plenum. This low-velocity
air ow uses signifcantly less energy than orced
air, which has to travel great distances.
With an overall target o a 35-per-cent
reduction in water use in combination with thesignifcant energy savings, along with the use
o low or no volatile organic compounds any-
where in the buildings, the ASSC would almost
assuredly achieve a LEED Gold rating.
The goal, however, is not LEED compliance
but rather in the spirit o the 2030 Challenge,
it is how the building rises to challenge o
ensuring uture generations can learn while
reducing their impact on the environment.
As Dove says, “We know what it takes to
design a good green building. It’s how we do
our business. It’s not an add-on or us.” ■
continued from page 13
Environmentally Friendly
100% Grass Coverage
Strong - 5721 psi
grasspave2.com
800-233-1510
459552_Invisible.indd 1 1/16/10 11:54:48 AM
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 15/32
ARCHITECTURE CANADA ■ 15
L’éclairage naturel
Dès l’enfance, le jeune David Dove, MRAIC, de Vancouver, rêvait de devenir
architecte comme son idole, le légendaire Arthur Erikson. Il n’aurait toutefois
jamais imaginé qu’il réaliserait un jour un projet sur le campus maintes fois
primé qui a fait connaître Erikson dans le monde entier.
Le complexe des arts et des sciences sociales de l’Université Simon Fraser
des architectes Busby Perkins+Will, terminé en 2008, comprend deux immeu-
bles : le Saywell Hall, qui abrite les départements d’archéologie, de crimino-
logie, de psychologie clinique, d’études sur les Premières nations et le Centre
for Forensic Research, de même que le Blusson Hall, qui abrite la nouvelle fa-
culté de sciences de la santé. Les deux bâtiments en forme de C se font face
et forment ainsi une grande cour aménagée qui favorise les échanges et la
communication.
Les architectes ont réinterprété la stratégie de protection contre le soleil uti-
lisée par Erickson dans les bâtiments originaux, comme l’Academic Quadrangle,
et ont installé des dispositifs d’ombrage verticaux en verre qui font écho aux
lames de béton verticales du célèbre architecte. Toutefois, ils ont également
tenu compte de l’orientation de chaque façade par rapport au soleil. Ainsi, sur
les façades sud du Blusson Hall et du Saywell Hall, les concepteurs ont prévu
des pare-soleil en béton en porte-à-faux à chaque étage, rappelant ainsi la
Sur les traces d’EricksonPar Christopher Guly
Toutes les images : Busby Perkins+Will Architects Co.
suite à la page 16
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 16/32
w w w .
r a i c .
o r g
/
2 0 1 1
16 ■ ARCHITECTURE CANADA
L’éclairage naturel
volumétrie du bâtiment d’Erickson, dans lequel les étages supérieurs en saillie
assuraient l’ombrage des étages inérieurs.
Les bâtiments ont également une large place à la lumière naturelle qui
pénètre partout, même dans les laboratoires de travaux pratiques qui sont géné-ralement des espaces clos. Toutes les zones de circulation publique comportent
au moins un mur vitré du plancher au plaond. Pour empêcher la surchaue,
on a utilisé du verre ritté et installé des pare-soleil extérieurs horizontaux qui
réduisent le gain de chaleur de 90 pour cent à l’intérieur.
L’éclairage naturel et la stratégie de protection contre le soleil, jumelés aux
commandes d’éclairage intelligentes et aux particularités des systèmes mécani-
ques, ont permis de réduire la consommation d’énergie de plus de 30 pour cent
par rapport à un bâtiment semblable construit selon les normes nationales.
Pour réduire la consommation d’énergie, on a aussi installé des hottes à ai-
ble débit dans les laboratoires de travaux pratiques. De plus, on a installé sur la
toiture des dispositis de traitement de l’air qui récupèrent la chaleur contenue
dans l’air d’évacuation pour préchauer l’air d’apport.
Ailleurs, la masse thermique de la structure de béton capte la chaleur du-
rant le jour et la libère durant la nuit, ce qui a pour eet de réduire la charge de
climatisation durant le jour.
En plus de la ventilation naturelle et de l’utilisation de la chaleur résiduelle
récupérée, le complexe se distingue par d’autres éléments écologiques, comme
une toiture verte et des aménagements paysagés qui sont conçus pour rédui-
re les charges de chauage et de climatisation des bâtiments et contrôler le
ruissellement des eaux pluviales et qui recouvrent 90 pour cent des suraces
extérieures horizontales.
Par ailleurs, l’alimentation en air des salles de conérences vient d’un plé-
num situé sous le plancher. Ce système à aible débit consomme beaucoup
moins d’énergie qu’un système à air orcé dans lequel l’air doit circuler sur de
longues distances.
Les concepteurs ont fxé à 35 pour cent l’objecti global de réduction de la
consommation d’eau par rapport à la celle d’un autre bâtiment semblable et
ils ont spécifé des matériaux contenant peu ou pas de composés organiques
volatils.
La perormance de ce complexe est de plus de 50 % supérieure à celle des
moyennes nationales pour des bâtiments comparables et de 70 % supérieure
à celle des bâtiments comparables de la région du nord-ouest du Pacifque
utilisés par l’architecte comme réérence. Les concepteurs n’ont ménagé aucun
eort pour orir aux générations utures un lieu d’apprentissage qui leur permet
de réduire leur impact sur l’environnement.
L’architecte David Dove conclut comme suit : « Nous savons comment
concevoir un bon bâtiment durable, c’est notre açon usuelle d’exercer notre
proession. Nous ne considérons pas la durabilité comme un ajout, mais com-
me une açon naturelle de concevoir des bâtiments. » ■
suite de la page 15
Toutes les zones de circulation publique comportent aumoins un mur vitré du plancher au plafond.
Manufacturers of Ornamental IronFence Systems, the fence preferred byCanadian Architects since 1989.
Iron Eagle offers over 62 unique designs forCommercial, Industrial and Residential applications
• CAD drawings available on our website •
IRON EAGLEIndustries Inc.
1256 Cardiff Blvd.Mississauga, ON L5S 1R1
Tel.: (905) 670-2558 • Fax: (905) 670-2841www.ironeagleind.com • e-mail: [email protected]
461908_IronEagle.indd 1 1/20/10 11:08:58 AM
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 17/32
P H O T O B Y G E C A R C H I T E C T U R E
ARCHITECTURE CANADA ■ 17
Tempered Slab
Much like the mighty Rocky Mountain range that rames it, École Lawrence Grassi
Middle School in Canmore is designed or long-term sustainability. It is well-pos-
itioned to meet the 2030 Challenge having recently been designated as a “net-zero
ready” building by Natural Resources Canada (NRCan). In doing so, the building also
met a 2030 Challenge energy reduction milestone early – 65 per cent by 2017 – bynearly 10 years.
O about 250 buildings across Canada reviewed under NRCan’s Design Validation
program, only two have achieved this, and Lawrence Grassi School is the only one to do so
entirely through energy-efcient design (without on-site renewable energy generation).
Designed by GEC Architecture, the frm incorporated a sophisticated mechanical
system in the school that relies on a tempered slab, integrated with the school’s
displacement-ventilation system, to heat and cool the building.
“We had a lot o success with that project both in terms o energy efciency and
comort level or its occupants,” says David Edmunds, FRAIC, a senior partner with
Calgary-based GEC Architecture.
The tempered slab system is well-suited to a place like Canmore, which can experience
large day-to-night temperature swings due to the high altitude (about 1,350 metres above sea
level), predominantly sunny skies and the legendary Chinooks.As Edmunds point out, it could hover around the reezing mark in the morning when
children go to school and zoom up to 20 degrees Celsius by the time they leave in late
aternoon. The slab’s inherent thermal mass, and the exceptional thermal capacity o water
circulated through it, moderate indoor temperatures.
Heating and cooling is provided by two high-efciency, gas-fred, ully condensing boilers
that circulate heated water through the tempered slab piping. All o the indoor heat is delive-
red through the tempered oor slab at a temperature that is only slightly above the desired
ambient room temperature.
Since the building is not air conditioned, radiative cooling – on warmer days – is achieved
By Christopher Guly
Photos by Steve Nagy Photography unless noted otherwise
Computer models and images by GEC Architecture
Energy eiciency makes the grade
P H O T O B Y R O Y O O M S L I G
H T W O R K S P H O T O G R A P H Y
continued on page 18
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 18/32
w w w .
r a i c .
o r g
/
2 0 1 1
18 ■ ARCHITECTURE CANADA
Tempered Slabusing the tempered slab as a heat sink. Meanwhile,
warm, stale air is displaced by incoming resh
air and removed near the top o each room via
ductwork connected to heat-recovery ventilators.
“Rather than mechanically adjusting temperatu-
res using a very elaborate air conditioning or heating
system – which is also very energy inefcient – the
slab works with the climate,” explains Edmunds.“Because you put heat into it all night, it gives
o heat when it’s coldest in the morning. When the
temperature rises later in the day, it begins to absorb
heat through the evening as the temperature drops.
So it benefts rom the diurnal cycle.”
Since most o the heating or cooling is pro-
vided by the tempered slab, the ventilation sys-
tem is only required or resh air.
This approach has resulted in energy use
that is 70-per-cent better than the baseline
defned by the Model National Energy Code o
Canada or Buildings.
Lawrence Grassi Middle School also promotes
sustainability through its architectural design.
In light o its rugged, mountainous and woodsy
surroundings, giving the school a wood rame and
a heavy timber glue-laminated construction madesense, explains Edmunds.
Structural insulated panels, which consist
o a layer o polymer oam sandwiched between
two layers o plywood, were used on the roo and
wood-rame walls provide high insulation levels.
Those eatures, along with the use o triple-glazed
windows throughout the school, have resulted in “a
very efcient building envelope,” says Edmunds.
Other eatures such as low-water plumbing
fxtures and the use o natural light help urther
reduce environmental impacts and achieve
additional energy savings. ■
continued from page 17
The tempered slab system is well-
suited to a place like Canmore,
which can experience large day-to-
night temperature swings due to the
high altitude, predominantly sunny
skies and the legendary Chinooks.
Sometimes, it’s okay for sustainability
to be beneath you.
Take a stand on green-build with Tate under-
floor service distribution systems (UFSD).
With Tate’s UFSD, it’s the things you don’t see that
make the difference. The beauty of this system is in
what happens below the surface. A combination of
modular wiring, cabling and air delivery systems offers
savings in materials and energy efficiency, while also
improving air quality and comfort. In fact, it’s a system
so full of green-build attributes, you never really walk
on it, you make a stand.
To learn more, call 905-847-0138 or visit www.tateasp.com.
511148_Tate.indd 1 12/20/10 11:25:38 AM
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 19/32
La dalle de béton du plancher
ARCHITECTURE CANADA ■ 19
D’ailleurs, Ressources naturelles Canada
(RNCan) a récemment désigné cette école
comme un bâtiment « tout près du zéro
absolu». Seuls deux bâtiments, parmi les quel-
que 250 des quatre coins du Canada examinés
par RNCan dans le cadre de son programme
de validation de la conception des bâtiments,
ont obtenu cette désignation et seule l’école
Lawrence-Grassi se l’est méritée uniquement
grâce à son efcacité énergétique (sans pro-
duction sur place d’énergie renouvelable).
Le bâtiment, conçu par la frme GEC
Architecture, comporte un système mécanique
avant-gardiste qui compte sur la circulation
de l’eau dans un réseau intégré aux dalles de
béton du plancher et sur un système de ven-
tilation par déplacement d’air pour assurer le
chauage et le reroidissement.
« Ce bâtiment donne des résultats très
concluants, tant sur le plan de l’efcacité éner-
gétique que du conort des occupants », souligne
David Edmunds, FRAIC, un associé principal dubureau de GEC Architecture à Calgary.
Le principe de la dalle à température
tempérée convient bien à un endroit comme
Canmore où les températures varient considé-
rablement entre le jour et la nuit en raison de
l’altitude élevée (environ 1 350 mètres au-des-
sus du niveau de la mer), de l’ensoleillement
abondant et des légendaires Chinooks.
Comme le ait remarquer David Edmunds,
le mercure peut être près du point de congé-
lation lorsque les enants quittent la maison le
matin et atteindre les 20 degrés Celsius à leur
retour. La masse thermique des dalles de bé-
ton et l’exceptionnelle capacité thermique de
l’eau qui y circule permettent de maintenir des
températures intérieures modérées.
Deux chaudières à condensation à haut
rendement, alimentées au gaz, ont circuler
l’eau chaude dans la tuyauterie intégrée aux
dalles de plancher. Tout le chauage provient
de la dalle tempérée à une température qui
n’est que légèrement plus élevée que la tem-
pérature ambiante désirée.
Par Christopher Guly
Photos par Steve Nagy Photography, sauf indication contraire
Modèles informatiques et images, GEC Architecture
Le principe de la dalle à température tempérée convient bien à un endroit comme Canmore où les températures varient considérablement entre le jour et la nuit en raison de l’altitude élevée, de l’ensoleillement abondant et deslégendaires Chinooks.
Le bâtiment ne comporte aucun système
de climatisation et recourt au reroidissement
radiant – lorsque les journées sont plus chau-
des – en utilisant la dalle comme un puits de
chaleur. Par ailleurs, l’air chaud et vicié est
chassé par l’air rais introduit dans les pièces
et cet air chaud est évacué par des conduits
situés au haut de chaque pièce et reliés à des
ventilateurs récupérateurs de chaleur.
« Au lieu de contrôler les températures ambian-
tes à l’aide d’un système de chauage ou climati-
sation mécanique très élaboré – qui est aussi très
énergivore – nous utilisons la dalle de plancher en
béton », explique l’architecte Edmunds.
Une réussite magistrale sur le plande l’eicacité énergétique
suite à la page 20
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 20/32
w w w .
r a i c .
o r g
/
2 0 1 1
20 ■ ARCHITECTURE CANADA
La dalle de béton du plancher
« Le système en place tire parti du cycle diurne de la température.
Quand la température augmente en fn de journée, il commence à
absorber de la chaleur qu’il peut ensuite diuser lorsqu’il ait roid en
matinée. »
Le système de ventilation ne sert qu’à approvisionner le bâtiment
en air extérieur.
Cette stratégie a permis de réduire de 70 pour cent la consomma-
tion énergétique par rapport à un bâtiment de réérence défni par le
Code modèle national de l’énergie pour les bâtiments du Canada.
L’école intermédiaire Lawrence-Grassi valorise également la durabi-
lité par son architecture.
Dans un environnement de montagnes escarpées et de orêts, il
était logique de privilégier l’ossature de bois et l’utilisation du bois
d’œuvre lamellé-collé, ajoute David Edmunds.D’autre part, l’installation de panneaux isolants structurels, abri-
qués d’une couche de mousse de polymère recouverte de deux re-
vêtements de contreplaqué, sur le toit et sur les murs à ossature de
bois, de même que l’installation de enêtres à triple vitrage à la gran-
deur de l’école contribuent à la grande perormance de l’enveloppe
du bâtiment.
Enfn, l’utilisation d’appareils à aible débit et la pénétration de la
lumière naturelle aident à réduire les impacts environnementaux et à
réaliser des économies d’énergie additionnelles. ■
suite de la page 19
Toronto905.731.8681 Vancouver604.276.9904Calgary 403.730.5901
www.fujiteccanada.com
It’s time you Fujitec your elevator.
Contact your local sales representativefor further information regardingFujitec’s new product lines, includingthe eco-friendly machine roomlesselevator system.
518432_Fujitec.indd 1 3/19/11 6:33:50 PM
TERRAZZO, TILE AND MARBLE ASSOCIATION OF CANADA
ASSOCIATION CANADIENNE DE TERRAZZO, TUILE ET MARBRET: 905.660.9640 800.201.8599 Email: [email protected] Web: ttmac.com
TTMAC Services
Inspections
Training
Verispec Program
TTMAC Specifcation Guides
09 30 00 Tile Specifcation Guide
09 66 00 Terrazzo Specifcation Guide
Terrazzo Colour Plate Brochure
Dimension Stone Guide Volume II
Hard Surace Maintenance Guide
Promoting quality workmanship within the hard surace industry.
466275_Terrazzo.indd 1 3/23/10 7:56:33 AM
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 21/32
ARCHITECTURE CANADA ■ 21
Environmental Relection
In designing a green building along Nova
Scotia’s rugged Bay o Fundy coastline, Ron
Burdock, MRAIC had 300 million years o
history to guide him.
Opened in the spring o 2008, the $5.4-million
Joggins Fossil Centre was initially intended to be
simply an interpretive site or the world-amous
Coal Age ossils ound in the nearby clis. But
early into the design phase, Haliax-based
WHW Architects Inc., where Burdock is a senior
architect, and the client – the Cumberland
Regional Economic Development Association
and the Joggins Fossil Institute Association –
realized the location and its epochal signifcance
oered a unique opportunity to create a
sustainable acility or the uture, inormed by
its past.
Designated a World Heritage Site by the
United Nations Educational, Scientifc and
Cultural Organization (UNESCO) three years
ago, the 16-kilometre-long Joggins Fossil Clis’rocks contain the most comprehensive record
o terrestrial lie rom the Carbonierous period
Coal Age site spawns
low-carbon centreBy Christopher Guly
Photos by WHW/Craig Mosher
The building’s cliff-like structure splits,like a geological fault line, to form an
entrance and blends the centre to the
site’s geological and industrial history.
between 354 to 290 million years ago. The remains
o the frst reptile on Earth – Hylonomus lyelli,
which predated dinosaurs by 100 million years –
were discovered at this paleontological property
considered by Charles Darwin as the “Coal Age
Galápagos” or the diversity and abundance o its
ossilized treasures.
Beginning in the mid-17th century, the site’s
ancient coal seams literally helped uel the
Industrial Revolution and transormed the tiny
community into a major centre that pumped vast
amounts o carbon dioxide into the atmosphere.
“This is the story o the carbon question rom
two ends o a historic telescope,” explains Burdock,
continued on page 24
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 22/32Follow us on Twier @CaG
The Canada GreenBuilding Council (CaGBC)is the country’s voice forgreen building informaon,
advocacy and cerficaon.Visit cagbc.org.
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 23/32
Réflexion de l’environnement
ARCHITECTURE CANADA ■ 23
La structure du bâtiment crée une scission, comme une ligne de faille, pour créer l’entrée, et elle établit un lien très fort avec l’histoire géologique et industrielle du site.
En concevant un bâtiment durable le long
de la côte accidentée de la Baie de Fundy,
en Nouvelle-Écosse, Ron Burdock, MRAIC,
s’est laissé guider par 300 millions d’années
d’histoire.
Ouvert au printemps de 2008, le Joggins
Fossil Centre, construit au coût de 5,4 millions $
ne devait être au départ qu’un site d’interprétation
des falaises fossilifères environnantes datant de
l’âge du charbon (le carbonifère) et dont la va-
leur universelle est exceptionnelle. Toutefois, dès
l’étape préliminaire, le cabinet WHW ArchitectsInc. d’Halifax, où Burdock occupe un poste
d’architecte senior, et le client – la Cumberland
Regional Economic Development Association
et la Joggins Fossil Institute Association – ont
réalisé que le lieu et son importance historique
offraient une occasion unique de créer un bâti-
ment durable qui tient compte du passé.
Inscrites à la liste des sites du patrimoine
mondial par l’Organisation des Nations Unies
pour l’éducation, la science et la culture
(UNESCO) il y a trois ans, les falaises fossilifè-
res de Joggins qui s’étendent sur 16 kilomètres
contiennent le registre le plus complet des for-
mes de vie terrestre à l’époque du carbonifère
datant de 354 à 290 millions d’années. Les
restes du premier reptile sur terre - Hylonomus
lyelli, qui a précédé le dinosaure de quelque 100
millions d’années – ont été découverts à ce site
paléontologique que Charles Darwin surnom-mait le « Galápagos du carbonifère » en raison
de la richesse des fossiles qu’on y trouve.
Dès le milieu du 17e siècle, les riches gise-
ments de charbon présents depuis si longtemps
sur le site ont accéléré la révolution industrielle
et transformé la petite communauté en un centre
important qui rejetait toutefois de grandes quan-
tités de dioxyde de carbone dans l’atmosphère.
« C’est l’histoire du carbone vue à travers
les deux extrémités d’un télescope historique»,
Aucune émission de carbone sur un site du carbonifère
explique Burdock, qui décrit le Joggins Fossil
Centre comme la « meilleure tribune » pour dé-
montrer les effets du changement climatique.
Comme le Centre a pour but de présenter les
fossiles carbonifères, aucun combustible fossile
n’est brûlé sur place. Le bâtiment comble plu-
tôt ses besoins énergétiques à partir de sources
renouvelables.
Il comporte un aérogénérateur de 50 kilo-watts, qui capte les vents puissants au large de
la côte et produit les deux tiers des besoins en
suite à la page 24
Par Christopher Guly
Photos par WHW/Craig Mosher
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 24/32
w w w .
r a i c .
o r g
/
2 0 1 1
24 ■ ARCHITECTURE CANADA
Rélexion de l’environnement
that are complemented by the use o solar
photovoltaic panels. Solar thermal panels are
also used to pre-heat the building’s hot-water
supply.
Nova Scotia-manuactured glazing units
help to diuse daylight – and regulate heat gain and loss – in the centre’s large spaces.
A living roo, which replicates the vegeta-
tion ound on the clis, also minimizes heat
loss, improves insulation and assists with
collecting water, which is pumped rom an
underground cistern to dual-ush toilets. That
eature, along with such low-ow plumbing
fxtures as waterless urinals and sel-closing
aucets, help reduce potable water consump-
tion or the 1,182-square-metre centre by
57.2 per cent compared to a similar-sized
building.
Overall, the Joggins Fossil Centre – winner o the 2008 Nova Scotia Association o
Architects’ Lieutenant Governor’s Medal o
Excellence – uses 64.5 per cent less energy
than a comparable building.
But while the acility is 2030 Challenge
compliant and is aiming or LEED Gold certi-
ication, it is also an imaginative architectu-
ral relection o its environment.
The building’s cli-like structure sp lits, like
a geological ault line, to orm an entrance
who describes the Joggins Fossil Centre as
the “best soapbox” rom which to showcase
the eects o climate change.
Since the acility is meant to showcase
Carbonierous ossils, no ossil uels are bur-
ned on site. Instead, the building relies on
renewable sources to meet its energy needs.
A 50-kilowatt turbine, which harnesses
the mighty winds o the coast, generates two-
thirds o the centre’s electrical power needs
and blends the centre to the site’s geological
and industrial history, explains Burdock.
Olive-brown Wallace sandstone, quarried
less than 100 km away, and Nova Scotia-
harvested, similarly-toned hemlock clad
the building parallel to the sloped roo that mimics the sloping layers o ossil-rich sedi-
mentary rock in the clis and since-vanished
mine structures.
“The design is meant to be elemental, as
i the building was draawn out o the surroun-
ding landscape,” explains Burdock.
“It is also a metaphorical illustration o a
passage back in time with a huge story to tell
about sustainability.” ■
électricité du centre, l’autre tiers étant produit
par des panneaux photovoltaïques. Il comporte
également des capteurs solaires qui préchau-
ent l’eau du bâtiment.
Les vitrages à haute perormance abriqués
en Nouvelle-Écosse diusent la lumière natu-
relle tout en contrôlant les gains et les pertes de
chaleur dans les grands espaces du bâtiment.
Un toit vert, qui reproduit la végétation trou-
vée sur les alaises, réduit les pertes de chaleur,
améliore l’isolation et contribue à la collecte des
eaux pluviales qui sont acheminées dans une ci-
terne souterraine pour être ensuite pompées et
servir pour les toilettes à double chasse. Grâce
à ce toit vert et aux appareils à aible débit,
comme les urinoirs sans eau et les robinets à
ermeture automatique, la consommation d’eau
potable du bâtiment de 1 182 mètres carrés
est de 57,2 pour cent inérieure à celle d’un
bâtiment semblable construit selon les normes
usuelles.
Par ailleurs, le Joggins Fossil Centre – lauréat
d’une médaille d’excellence du Lieutenant gou-
verneur en 2008 dans le cadre des Prix de laNova Scotia Association o Architects – consom-
me 64,5 pour cent moins d’énergie qu’un bâti-
ment comparable.
Ce bâtiment qui adopte les principes du Déf
2030 et qui vise la certifcation LEED de niveau
or se distingue également par son architecture
qui en ait le reet de son milieu.
La structure du bâtiment crée une scission,
comme une ligne de aille, pour créer l’entrée, et
elle établit un lien très ort avec l’histoire géologi-
que et industrielle du site, explique l’architecte.
Le bâtiment est revêtu de grès de Wallace de
couleur brun olive extrait d’une carrière située à
moins de 100 km du centre, et de bardeaux de
pruche d’une couleur semblable provenant de la
Nouvelle-Écosse. Le bardeau est installé selon
la même inclinaison que la toiture, reproduisant
le profl des couches de roches sédimentaires
ossilières des alaises environnantes et les
structures des mines maintenant disparues.
« Nous avons voulu créer un bâtiment élé-
mental, qui donne l’impression de prolonger le
paysage environnant », explique Burdock.
« C’est aussi une illustration métaphori-que qui nous ait reculer dans le temps pour
nous raconter une histoire extraordinaire sur la
durabilité. » ■
continued from page 21
suite de la page 23
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 25/32
ARCHITECTURE CANADA ■ 25
Qualiications-Based Selection / Sélection fondée sur les qualifications
Architecture Canada | RAICbelieves the next generation o ar-chitecture should be the best ever and include the most sustainablebuildings possible.
Governments, administrators,and most importantly, Canada’scitizens, must be certain to get thebest value or construction dollarsspent today because it will aect the costs o the uture. That is whyit is so important to choose thebest project team.
Engineering and architectu-ral design ees represent a verysmall percentage o the lie cyclecost o any building. Even modest design enhancements, however,can mean enormous improvementsin human productivity and thecosts associated with operating abuilding. Architects are trained to
deliver energy efcient and envi-ronmentally sound buildings andthis must be implemented in alluture buildings.
Sustainability andlong-term value
Decisions made during project planning and design will have animpact over the entire lie o anybuilding project especially in acommunity’s learning centre. Usershave to live with the decisions
Architecture Canada | IRAC croit que les bâtiments de la prochainegénération se distingueront par leur qualité et leur durabilité inégalées.
Les gouvernements, les adminis-trateurs et, plus important encore,les citoyens du Canada, doivent êtrecertains d’obtenir la meilleure valeur pour les sommes investies dans laconstruction des bâtiments, car lesdécisions qu’ils prennent aujourd’huiauront des incidences sur les coûtsuturs. C’est pourquoi le choix del’équipe de projet est si important.
Les honoraires des architectes et des ingénieurs ne représentent qu’untrès aible pourcentage du coût d’unbâtiment sur son cycle de vie, et pour-tant les améliorations que ces proes-sionnels apportent à un bâtiment,même si elles semblent modestes,peuvent avoir des répercussions
considérables sur la productivité desoccupants en plus de réduire lescoûts d’exploitation. Les architectesont la ormation nécessaire pour réa-liser des bâtiments éconergétiques et écologiques. Il aut en tirer proft danstous les nouveaux projets!
Durabilité et valeur àlong terme
Les décisions prises à l’étape dela planifcation et de la conceptiond’un projet ont des incidences sur
toute la durée de vie de n’importequel bâtiment, y compris les centresde ormation communautaires. Lesusagers de ces bâtiments vivront avec
Reducing coststhrough Good
Design
Un bon designpour réduire les
coûtsmade during planning stages or decades, even generations.
Investing in proessional ser-vices at the onset o a project has the potential to reduce main-tenance and operating costswhile improving reliability andextending service lie. The inverse o course is also true – a lack o invest-ment at the design stage can surelyresult in signifcantly higher capital,operating and maintenance coststhroughout the lie o the project.
Qualifications-BasedSelection (QBS)
Detailed inormation is availableat www.raic.org under Choosing an
Architect. Another important tool is
The National Guide to Sustain-
able Municipal Infrastructure
(InraGuide1
) which now has a sec-tion entitled Best Practice for Se-
lecting a Professional Consultant. This Best Practice promotes theprinciples o Qualifcations-BasedSelection.
The Best Practice, which wasdeveloped using extensive in-terviews and research, suggeststhat many agencies do, in act,recognize that QBS encouragesinnovation, lie-cycle cost savingsand sustainability. ■
ces décisions pendant des décen-nies, voire des générations.
Un investissement dans les servi-ces proessionnels dès le tout début d’un projet aidera à réduire les coûtsd’entretien et d’exploitation tout enaméliorant la fabilité du bâtiment et en prolongeant sa durée de vie utile.À l’inverse, le déaut d’investir suf-samment à l’étape de la conceptionrisque d’entraîner une hausse im-portante des coûts d’immobilisation,d’exploitation et d’entretien du bâti-ment tout au long de sa durée de vie.
Sélection fondée sur lesqualifications
On trouvera plus d’inormationsur la sélection des architectes enconsultant le site www.raic.org à larubrique Sélection d’un architecte, sous l’onglet L’architecture et les
architectes. Par ailleurs, le Guide national
pour des infrastructures municipales
durables (InraGuide1) est aussi unoutil important. Il comprend mainte-nant une section intitulée Meilleure
pratique sur la sélection d’une so-
ciété d’experts-conseils qui avoriseles principes de sélection ondée sur les qualifcations.
Selon cette Meilleure pratique, qui est le ruit de nombreuses entre-vues et recherches, bien des organis-
mes reconnaissent que la sélectionondée sur les qualifcations avorisel’innovation, les économies sur le cy-cle de vie et la durabilité. ■
1 InraGuide is a collaboration o the Federation o Canadian Municipalities,
Inrastructure Canada, the National Research Council and the Canadian Public Works
Association to help administrators and municipalities make inormed decisions and
promote sustainable inrastructure investment. Although originally intended or
inrastructure projects, the principles outlined in this Best Practice are relevant or the
selection o an architect.
1 InraGuide regroupe la Fédération canadienne des municipalités, Inrastructures
Canada, le Conseil national de recherches du Canada et l’Association canadienne des travaux
publics et vise à aider les administrateurs et les municipalités à prendre des décisions éclairées
et à promouvoir les investissements dans des inrastructures durables. Les principes décrits dans
cette Meilleure pratique s’appliquaient à l’origine aux projets d’inrastructures, mais ils sont tout à
ait pertinents pour la sélection d’un architecte.
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 26/32
w w w .
r a i c .
o r g
/
2 0 1 1
26 ■ ARCHITECTURE CANADA
10th Edition of the
IES LIGHTING HANDBOOK
Editors: David DiLaura, Kevin Houser,
Richard Mistrick, Gary Steffy
Features: Provides a compendium of what is known that directly relates to lighting
and lighting design
Concise explanation of material
Content and format tailored to those involved in lighting decisions
Four color throughout; 600+ illustrations
Conveniently-referenced tabular information is exemplified withnumerous photographs and illustrations
Sustainable practice embedded throughout: refinement of light levelcriteria, definitive criteria related to brightness and user impressions, factorsinfluencing power and energy use for lighting, and methods to minimize lighttrespass and light pollution
Pages: 1087 (approx.)
List Price: $595.00
IES Member Price: $350.00Order #: HB-10-11
For Additional Information Visit:
Online:
http://www.ies.org/handbookca
“The Handbook is the most thorough andcomprehensive revision in the past fortyyears. Not only is the format completelynew, but the scope and depth of thesubjects are unprecedented. It is quitesimply the best Handbook ever.”
Alan Laird Lewis, OD, PhD, FIES
510965_Illuminating.indd 1 12/17/10 8:47:03 PM
The Natural Advantage of
NORDIC LAMTM
NORDIC JOISTTM
NORDIC LVL
RIM BOARD
Resource friendly, made from 100% black spruce, glulam products fromNordic Engineered Wood provide the dimensional stability and highstrength reliability builders need in residential, commercial, industrialand architectural construction.
Recent projects demonstrate the design flexibility of Nordic’s products.Nordic LamTM beams, headers, columns, tall wall studs, and our latestinnovation, the NI-90x I-joist series provide price- and performance-basedsolutions for all your design and building requirements.
Nordic’s glulams and I-joists feature an exclusive Enviro=LamTM technology,
a unique fibre optimization process that minimizes waste and convertsmore of nature’s raw material into useful products than ever before.
Call us today and discover how Nordic products can work for you!
w ww . n o r d i c e w p . c omA Division of Chantiers Chibougamau
Nordic is certified under internationally recognized standards
and the Forest Stewardship Council.
510998_Nordic.indd 1 1/22/11 6:10:20 PM
Products & Services Marketplace
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 27/32
ARCHITECTURE CANADA ■ 27
Products & Services Marketplace
524508_Sika.indd 1 3/31/11 8:08:27 PM
523553_Precision.indd 1 4/1/11 11:49:50 AM
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 28/32
w w w .
r a i c .
o r g
/
2 0 1 1
28 ■ ARCHITECTURE CANADA
Products & Services Marketplace
ATMOSPHERE
Designed for Powerbond®
. Interpreted for modular.
For more information call 800.655.1075.
Powerbond®
Modular Broadloom Woven
tandus.com
524567_Tandus.indd 1 3/31/11 5:48:44 PM
A Z O N S A V E S E N E R G Y
2
1
Universal No-Tape™ 304structural thermal barrier polymer
2
1
1-800-788-5942 | www.azonintl.com
Specify Energy Saving Products from Azon
Conserving energy in
commercial buildings is
possible when manufacturers
of fenestration products use
the Azon thermal barrier
method for aluminum windows
and Warm-Light® warm-edge
spacer for insulating glass.
Universal No-Tape™ 304structural thermal barrier polymer
Contact us to learn about the role of Azon
thermal barriers in energy conservation
Modern daylighting systems
produced with both Azon structural
thermal barrier technologies will
yield a fenestration system capable
of upholding the highest efficiency
and sustainability standards.
372189_Azon.indd 1 3/22/08 7:25:38 PM21049_Beaver.indd 1 3/9/11 2:58:35 PM
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 29/32
ARCHITECTURE CANADA ■ 29
Products & Services Marketplace
The key to our Garden Roof ® is our Monolithic
Membrane 6125® , a seamless rubberized asphalt
membrane with a 45+ year track record for critical
water-proofing and roofing applications worldwide.
The Garden Roof®Assembly has set the standard by which all
other green roofs are measured. Our Total Assembly Warranty
provides owners with single source responsibility from the deck
up. This is peace of mind that only Hydrotech can offer.
Hyrdotech Membrane Corp.
800.361.8924
www.hydrotechmembrane.ca
447112_Hydratech.indd 1 9/18/09 9:13:30 PM
The deepest talent pool of BIM and Revit experts in
the industry. With extensive AEC industry experience,
we’ve been there, and can help you with everything
from a simple support call to implementation and
custom software development.
Build on your Autodesk skills
like never before
Build on your Autodesk skills
like never before
520939_IMAGINit.indd 1 3/19/11 6:47:11 PM
525048_Lighting.indd 1 4/4/11 8:05:14 AM25039_SuperForm.indd 1 4/29/11 11:31:26 PM
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 30/32
30 ■ ARCHITECTURE CANADA
w w w .
r a i c .
o r g
/
2 0 1 1
30 ■ ARCHITECTURE CANADA
ACCESS FLOORING
Tate ASP ..................................... ................ 18
ALUMINUM COMPOSITE MATERIAL
3A Composites USA, Inc. ......Inside Back Cover
ARCHITECTURAL HARDWARE
C R Laurence Company, Inc. ....................... 12
ARCHITECTURAL SOFTWARE
Graphisoft North
America ............................ Outside Back Cover
ARCHITECTURAL SPECIALTIES
Ten Plus Architectural Products Ltd. ............ 30
ARCHITECTURAL WOODWORK & CABINETRY
PRODUCTS
Precisionwerkz Canada Inc. ........................ 27
BRICK
The Belden Brick Company ........................... 4
CAD SERVICES
IMAGINit Technologies................................. 29
CENTRAL VAC
Vacuflo ....................................... .................. 6
CONCRETE PRODUCTS
Beaver Valley Stone Ltd............................... 28
CONCRETE RESTORATION & CLEANING
Sika Canada ..................................... .......... 27
CURVED FRAMING COMPONENTS
Flex-Ability Concepts .................................. 30
DECORATIVE CONCRETE
Euclid Canada ................................... ............ 6
ELEVATORS
Fujitec Canada Inc. ..................................... 20
ENGINEERED WOOD MANUFACTURER
Nordic Engineered Wood ............................. 26
ESCALATORS & MOVING WALKS
Fujitec Canada Inc. ..................................... 20
EXTERIOR CLADDING
3A Composites USA, Inc. ......Inside Back Cover
FENCING - ORNAMENTAL IRON
Iron Eagle Industries Inc. ............................. 16
FLOOR COVERINGS
Tandus Flooring, Inc .................................... 28
FLOORING
Sika Canada .................................... ........... 27
GREEN ROOF SYSTEMS
Hydrotech Membrane Corporation............... 29
HIGH-TOLERANCE FLOOR
Sika Canada .................................... ........... 27
ICFS
SuperForm Products Inc. ............................. 29
INFORMATION RESOURCE - TILE SPECS
Terrazzo Tile and Marble Association of
Canada ...................................... ................. 20
LIGHTING
Lighting Nelson & Garrett Inc. ..................... 29
LIGHTING PUBLICATIONS
Illuminating Engineering Society of
North America .................................. ........... 26
ARCHITECTURAL SPECIALTIESTen Plus Architectural Products Ltd.6535 MillCreek Drive, Unit 26Mississauga, ON L5N 2M2Phone: (905) 363-2306Fax: (905) 625-0067
Toll Free: (866) 884-0717Web: www.tenplus-online.comPurveyors of Architectural Louvres, Sunshades,Vision Screens and Footgrilles. We will gladly assist you with budgeting, detailing and specifications. Great customer service is our distinguishing factor.
CURVED FRAMING COMPONENTSFlex-Ability Concepts5500 SW 36th Street
Oklahoma City, OK 73179
Phone: (405) 996-5343
Fax: (405) 996-5353
E-mail: [email protected]
Web: www.flexabilityconcepts.comFlex-C Trac (steel) and Quick Curve Plate (wood) provide solutions for framing curved walls and soffits, c olumns, barrel vaults and more. They are strong and minimize flat spots.
LOUVRES
Ten Plus Architectural Products Ltd. ............ 30
MASONRY ANCHORAGE & REINFORCEMENT
Sika Canada ...................................... ......... 27
MEMBRANE ROOFING
Sika Canada ...................................... ......... 27
METAL BUILDING SYSTEMS
VP Buildings ...................................... ........... 3
MODULAR CONSTRUCTION
NRB Inc......................................................... 8
MORTAR FOR MASONRY RESTORATION
Sika Canada ...................................... ......... 27
ROOFING
Sika Canada ...................................... ......... 27
ROOFING & SIDING PANELS
3A Composites USA, Inc. ......Inside Back Cover
SITE PREPARATION
Invisible Structures, Inc. .............................. 14
SPECIAL PURPOSE ROOMS
Sika Canada ...................................... ......... 27
STONE ANCHORS
Sika Canada ...................................... ......... 27
STRUCTURAL CONCRETE
Sika Canada ...................................... ......... 27
TILES
Sika Canada ...................................... ......... 27
VACUUMS
Vacuflo .................................. ....................... 6
WATER SUPPLY & TREATMENT EQUIPMENT
Sika Canada ...................................... ......... 27
WATERPROOFING
Sika Canada ...................................... ......... 27
WINDOWS & DOORS
Marvin Windows & Doors .....Inside Front Cover
WINDOWS/THERMAL BARRIERS
Azon U.S.A., Inc. ....................................... .. 28
Index to Advertisers / Index des annonceurs
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 31/32
INTRODUCING ALUCOBOND®
COOL
From the makers of the world’s leading ACM comes a new, cool paint finish technology of fered ina broad spectrum of colors that provides higher solar reflectivity, potential energy savings and reduced
air conditioning costs.
With proven environmental advantages over non-cool finishes and products, cool technology already
qualifies for LEED credits in roofing applications, and similar certifications are expected for its use in
vertical applications.
For more information or to request samples, call your Alucobond representative or visit AlucobondUSA.com.
Alucobond® is a registered trademark of 3A Composites USA, Inc.
©3A Composites USA, Inc. 2010. All rights reserved.800.626.3365
AlucobondUSA.com
8/6/2019 Architecture 2011 Summer
http://slidepdf.com/reader/full/architecture-2011-summer 32/32
BROADEN YOUR
DESIGN
HORIZONS
ArchiCAD 15 enriches architectural forms available for architects a
designers to unleash their creative minds. ArchiCAD 15 also expan
the scope of the BIM workflow to renovation & refurbishment projec