Architectural pulls and -...

Architecturalpulls and handlesEquia nestotatus enis 2015

LecestSunturOrem fugaEquia nestotatusDisciisi nisquissusNequisi VoloreptataeConsecumque soloribusIminveria volorum

2

dormakaba Architectural pulls and handles

TG 138 locking ladder pull

Table of contents

MANEThandle

BEYOND handle

TG 138 locking ladder pull

03

040506

Architectural pulls and handles

TG handlesTG 9387 / TG 9335TG 9830 / TG 9304 / TG 9306Mounting options

0708

09

10

11

12

TG 138 locking and non-locking ladder pullsOverview 49" (1245) TG 138 ladder pull details and glass cutout template 60" (1524) TG 138 ladder pull details and glass cutout template 72" (1829) TG 138 ladder pull details and glass cutout template 84" (2134) TG 138 ladder pull details and glass cutout templateMounting pack options

14151617

MANET, ARCOS, and BEYOND handlesMANET handlesMANET details and glass fabricationARCOS details and glass fabricationBEYOND details

1719

Other pull handles and knobsEconomy pull handlesFlush pulls and glass knobs

Note: All measurements are shown in inches (mm); for example, 3/8" (10).

3

Overview

dormakaba offers a wide selection of pulls and handles for both tempered glass doors and solid material doors made of aluminum, wood, PVC, or mixed material: locking and non-locking ladder pulls, back-to-back pulls, customized handle solutions, and a variety of finishes and materials.

TG handlesNo handle in the market is more technically reliable or adaptable than the stainless steel TG handle. Available in numerous designs and sizes, dormakaba TG handles provide custom-ized solutions to meet individual application requirements. Some TG handles are made to order, to schedule, and to specification —elimi-nating the need to adapt on site. TG 9387 handles are available in stock in five lengths: 12" (305), 18" (457), 36" (914), 42" (1067), and 60" (1524).

TG 138 locking ladder pullsA dormakaba TG 138 locking ladder pull set is a pair of tubular lockable pull handles with a small format interchangeable (SFIC) cylinder on the secure side and a thumbturn on the non-secure side of the door. Made from the highest quality, Grade 316L stainless steel, TG 138 locking ladder pulls are perfect for the toughest interior/exterior environments. Four stocked lengths are available: 49" (1245), 60" (1524), 72" (1829), and 84" (2134) with custom sizes available for quote upon request.

ARCOS handlesWith its arc-like curvature to complement the ARCOS line, ARCOS handles are available in two lengths and two finishes: 13-3/4" (350) or 29-1/2" (750) in either Bright Anodized Aluminum or Custom Powder Coated. These beautifully crafted, high-quality, back-to-back handles combine a long service lifetime with an attractive appearance.

MANET handlesElegant, technologically advanced MANET handles deliver ideal solutions for a range of internal applications. These satin stainless steel handles are available in four fixed lengths and in single sided or back-to-back versions. They can be installed horizontally, vertically, or in a handrail configuration.

BEYOND handlesBEYOND handles were developed to comple-ment the dormakaba BEYOND system, but work well with all types of swing glass doors. Made of aluminum in a sleek modernist design, BEYOND handles are available in three lengths: 17-3/4" (450), 23-5/8" (600), and 35-7/16" (900). The finish is Similar to Satin Stainless.

WarrantyFor details, refer to the dormakaba Limited Warranty on our website at go.dormakaba.com/Terms-DA

Architectural pulls and handles For interior or exterior commercial doors

Note: Mounting packs are available for tempered glass doors and for aluminum, wood, PVC, and mixed material doors from 3/8” (10) to 1-3/4” (44). Contact the factory if mounting packs are required for thicker doors.

TG 9387 TG 9335 TG 9830 ARCOS handleTG 9304

4


TG handles Center distance specifically tailored to your requirements

La = Li ✗ 1.6LaLi

b a a b

• Each pull handle custom ordered to fit field preparation. No cutting or handle modifications required in field.

• No inventory or storage costs.• Robust design for maximum load resistance.• Naturally corrosion resistant. • All TG pulls are made from stainless steel

base material.• A range of mounting options is available to

suit various door thicknesses for glass, metal, or wood doors.

• Consistent appearance of all pull handles in the building.

ØG 1" (25) 1-1/4" (32)

ØS 23/32" (18) 1-1/32" (26)

H 2-15/16" (75) 3-11/32" (85)

3 fixings required

59-1/16" (1500) 74-13/16" (1900)

TG 9387

Pull handle with straight supports, stainless steel

1. Ref. # 905.370 Li = 60" (1524) La = 37-1/2" (953) (3F = 3 Fixing Posts)




5. Ref. # 905.382 Li = 18" (457) La = 12" (305) (2F = 2 Fixing Posts)


Service item* Description

Service inserts, reduces post thread from 5/16” (8) to 1/4” (6), used for every mounting post. Bulk pack of 6.Ref. # 905.390

Service mounting pack with finished mounting ROSE used for SNG GLASS mount 3/8" – 3/4" (10 – 19). Bulk pack of 6. Ref. # 905.387

Service mounting pack used for BACK-TO-BACK GLASS mount 3/8" – 3/4" (10 – 19). Bulk pack of 6. Ref. # 905.385

Service mounting pack with finished mounting ROSE used for SNG WOOD mount 1-3/8" – 2" (40 – 51). Bulk pack of 6.Ref. # 905.388

Service mounting pack used for BACK-TO-BACK WOOD mount 1-3/8" – 2" (40 – 51). Bulk pack of 6. Ref. # 905.386

Service mounting pack with BLIND (concealed) fasteners, used for SNG WOOD mount ≥ 1-3/8" (40). Bulk pack of 6. Ref. # 905.389

ØS

H

LiLa ØG

3-3/8"(85 mm)

Ø1"

(Ø26

)Ø

1"(Ø

26)

Ø1-

1/4"

(Ø32

)

LiLa

60" 42" 36" 18" 12"

Note: All TG 9387 handles above can be ordered as B2B (back to back) sets or SNG (single) for one side only.

* Service items for stock TG 9387 handles only; specify appropriate mounting option when ordering.

TG 9387 handles are available in two variations of custom lengths:

A. Specify Li only = (specify Li only then {La = Li x 1.6} [La = overall length], [Li = center to center of post]).

B. Specify Li and La desired.

Stock TG 9387 handles are also available in the six specifications shown at right and below.

5

TG handles

1-3/16"(30)

1-25/32"(45) 3-21/32"

(93)

1-3/16"(30)

13-2

5/32

"(3

50)19/32"

(15)

H13

-3/4

" (3

50)

BM

R

ØS

ØG

l

LH

B

R

R 1

TG 9830

Pull handle, stainless steel

TG 9304

Semi-circular pull handle, aluminum, stainless steel

TG 9306

Semi-circular pull handle with spacer fixings, stainless steel

Ø 1-3/16" (30)aluminum

1-3/16" (30) stainless steel

R 1-3/4" (45) 1-3/4" (45)

R1 5-29/32 (150) 6-7/8" (175)

B 7-11/16" (195) 8-21/32" (220)

H 3-11/32" (85) 3-11/32" (85)

L 11-13/16" (300) 13-25/32" (350)

ØG 1-3/16" (30) 1-9/16" (34)

ØS 1-1/32" (26) 1-1/4" (32)

R 6-7/8" (175) 6-7/8" (175)

B 7-11/16" (195) 8-1/16" (205)

H 3-11/32" (85) 3-15/16" (100)

M 25/32" (20) 1" (25)

Ø 1" (25) 1-1/4" (32)

H 2-15/16" (75) 3-11/32" (85)

L 8-1/4" (210) 7-7/8" (200)

Max. L 39-3/8" (1000) 51-3/16" (1300)

TG 9335

Straight mitered pull handle, stainless steel

L

Ø H

3-3/8"(85)

Ø1-1/4"(Ø32)

L ≥

8-1

/4"

(210

)

6


TG handles to glass doors

TG handles to wood doors

Optional support rose for pull handle

Single-sided, through-bolt mounting pack, with cap opposite5/16" – 19/32" (8 – 15) glass thicknessM6 Ref. # 905.905M8 Ref. # 905.904

Back-to-back, through-bolt mounting pack, concealed5/16” – 19/32” (8 – 15) glass thicknessM6 Ref. # 905.900M8 Ref. # 905.902

Single-sided, through-bolt mounting pack, with cap opposite1-3/8" – 3-15/16" (35 – 100) wood thicknessM6 Ref. # 905.907M8 Ref. # 905.906

Back-to-back, through-bolt mounting pack, concealed1-3/8” – 3-15/16” (35 – 100) wood thicknessM6 Ref. # 905.901M8 Ref. # 905.903

Screw M Handle Ø or ØG Hole Ø

M6 25/32" (20) 1/2" (12)

M6 1" (25) 1/2" (12)

M8 1-3/16" (30) 1/2" (12)

M8 1-1/4" (3) 1/2" (12)

M8 1-9/16" (40) 1/2" (12)

Screw M Handle Ø or ØG Hole Ø

M6 25/32" (20) 5/16" (8)

M6 1" (25) 5/16" (8)

M8 1-3/16" (30) 3/8" (10)

M8 1-1/4" (32) 3/8" (10)

M8 1-9/16" (40) 3/8" (10)

GZ 540 GZ 544

ØR 1-9/16" (40) 1-3/4" (44)

Ør 1/4" (6) 5/16" (8)

for Ø handle thickness

1" (25) 1-1/4" (32)

905.900905.902

Hole drilling

905.907905.906

905.901 905.903

TG handles Mounting options

ØR

Ør1/16” (2) thickness

Hole drilling

905.905905.904

Hole drilling

Hole drilling

7

TG 138 locking and non-locking ladder pullsLockable stainless steel pull handles with rim cylinder and thumbturn

For elegant and secure glass entrances, dormakaba offers the TG 138 locking and non-locking ladder pulls—a pair of tubular lockable pull handles with a small format interchangeable (SFIC) cylinder on the secure side and a thumbturn on the non-secure side of the door. Made from the highest quality, Grade 316L stainless steel, TG 138 locking ladder pulls are perfect for the toughest interior/exterior environments. Four stocked lengths are available: 49” (1245), 60” (1524), 72” (1829), and 84” (2134) with custom sizes available for quote upon request.

Lockable pull handles feature a patented anti-break-in technology and steel dead bolt locking on the interior or opposite of the cylinder side of the opening. The default cylinder is a Small Format Interchangeable Core (SFIC) less core (00). Other cylinder and keying options are available. A dust proof strike is included.

Mounting packs are available for tempered glass doors and for aluminum, wood, PVC, and mixed material doors from 3/8" to 1-3/4" (10 to 44). Contact the factory if mounting packs are required for thicker doors.

Matching non-locking ladder pulls are stocked in all four standard sizes, or custom sizes are available for a quote upon request.

The patented anti-break-in technology conceals cylinder-mounting screws — creating a safer and more secure environment for your office occupants.

Patented anti-break-in technology

TG handle mounting options TG 138 locking and non-locking ladder pulls

8


Ø1/2" (Ø13)

Ø3/4" (Ø19)*

C

B

B = 35-7/16" (900)C = 6-7/8" (175)

C

GLASS CUTOUT TEMPLATES 49" & 60"

B

*OR Ø3/4" (Ø19) WITH ADAPTER ORDERED SEPARATELY

1/2"

(12)

Ø1"

(Ø25

)

Ø1-3/8"(Ø35) 1-3/4"

(45)

1-1/16"(27)

6-7/8"(175)

6-7/8"(175)

35-7/16"(900)

49-3/16"(1250)

4-23/32"(120)

3-23/32"(94)

Ø1-3/8"(Ø35)

Ø1-3/8"(Ø35)

6-7/8"(175)

35-7/16"(900)

49-3/16"(1250)

3-5/32"(80)

C

B

B = 35-7/16" (900)C = 6-7/8" (175)

C

GLASS CUTOUT TEMPLATES 49” & 60”

B

Ø1/2" (Ø13)

Ø1/2" (Ø13)

49" (1245) TG 138 locking and non-locking ladder pulls

Locking ladder pull details

Locking ladder pull glass cutout template Non-locking ladder pull glass cutout template

Non-locking ladder pull details

Note: Use this cutout preparation for 49” (1254) single-sided locking ladder pull with cylinder or thumbturn.

9

A = 60" (1524) B = 35-7/16" (900)C = 6-7/8" (175)

C

B

A

Ø3/4" (Ø19)*


Ø1/2" (Ø13)

Ø1/2" (Ø13)

14-3/4" (374)

35-7/16"(900)

6-7/8"(175)

3"(75)

Ø1-3/8(Ø35)

1-3/4"(45)

1-1/16"(27)

6-7/8"(175)

35-7/16"(900)

60" (1524)

4-23/32" (120)

3-23/32" (94)

1/2"

(12)

Ø1"

(Ø25

)

14-3/4"(374)

35-7/16"(900)

A = 60" (1524) B = 35-7/16" (900)C = 6-7/8" (175)

C

B

A

Ø1/2" (Ø13)

Ø1/2" (Ø13)

Ø1/2" (Ø13)

6-7/8"(175)

Ø1-3/8"(Ø35)

Ø1-3/8"(Ø35)

Ø1-3/8"(Ø35)

60"(1524) 35-7/16"

(900)

6-7/8"(175)

3-5/16"(83)





TG 138 locking and non-locking ladder pulls

10


3"(75)

Ø1-3/8"(Ø35)

1-3/4"(45) 1/

2"(1

2)

Ø1"

(Ø25

)

1-1/16"(27)

35-7/16"(900)

72"(1829)

4-23/32" (120)

3-23/32" (94)

6-7/8"(175)


Ø1/2" (Ø13)

Ø1/2" (Ø13)

Ø3/4" (Ø19)*

A = 26-47/64" (679)B = 35-7/16" (900)C = 6-7/8" (175)

CC

B

A

B

A

Ø1-3/8"(Ø35)

Ø1-3/8"(Ø35)

Ø1-3/8"(Ø35)

35-7/16"(900)

26-3/4"(679)

72"(1829)

3-5/32"(80)

6-7/8"(175)

Ø1/2" (Ø13)

Ø1/2" (Ø13)

Ø1/2" (Ø13)

A = 26-47/64" (679)B = 35-7/16" (900)C = 6-7/8" (175)

CC

B

A

B

A





11

3"(75)

Ø1-3/8"(Ø35)

1-3/4"(45)

1/2"

(12)

Ø1"

(Ø25

1-1/16"(27)

35-7/16"(900)

84"(2134)

84"(2134)

4-23/32"(120)

3-23/32"(94)

6-7/8"(175)

A = 38-3/4" (984)B = 35-7/16" (900)C = 6-7/8" (175)

C

C

B

A

B

A


Ø1/2" (Ø13)

Ø1/2" (Ø13)

Ø3/4" (Ø19)*

Ø1-3/8" (Ø35)

Ø1-3/8" (Ø35)

Ø1-3/8"(Ø35)

6-7/8"(175)

35-7/16"(900)

38-3/4"(984)

84"(2134)

3-5/32" (80)

GLASS CUTOUT TEMPLATES 84”

A = 38-3/4" (984)B = 35-7/16" (900)C = 6-7/8" (175)

C

C

B

A

B

A

Ø1/2" (Ø13)

Ø1/2" (Ø13)

Ø1/2" (Ø13)





TG 138 locking and non-locking ladder pulls

12


Option Ref. # Description Door thickness

926.913

926.891

926.912

SHEET SCALE 3:1

6/18/2014C. BRUBAKER

926.891 Adaptor, .75 adaptor allows Non-Locking Pull to install in Locking Post Prep

–

926.913

926.891

926.912

SHEET SCALE 3:1

6/18/2014C. BRUBAKER

926.937 Strike, Dustproof, Standard

–

926.890 Mounting Pack, Back-to-back Lock Post, Non-Locking Posts

1-3/4" (44)

926890

926906

926907

926908

926909

926910

926911

926937

926.941 Mounting Pack, Back-to-back, Non-Locking

3/8" – 3/4" (10 – 19)

926.911 Mounting Pack, Back-to-back,Locking

3/4" (19)

926890

926906

926907

926908

926909

926910

926911

926937

926.909 Mounting Pack, Back-to-backNon-Locking Post

1-3/8" – 1-3/4" (34 – 44)

TG 138 locking and non-locking ladder pullsMounting pack options

13

Option Ref. # Description Door thickness

926890

926906

926907

926908

926909

926910

926911

926937

926.910 Mounting Pack, SNG Blind,3 each in pack(Will not project through door)

min. 1-3/4" (44)

926890

926906

926907

926908

926909

926910

926911

926937

926.908 Mounting Pack, Single Non-Lockingx Sex Nut

3/4" – 3-1/8" (19 – 80)

926890

926906

926907

926908

926909

926910

926911

926937

926.906 Mounting Pack, Single Non-Locking x Rose

3/8" – 3/4" (10 – 19)

926972

926939926938

926.938 Locking Mechanism only 1/2" (13)

926972

926939926938

926.939 Washer Pack –

TG 138 ladder pull mounting options

14


MANET handlesMANET handles, single side

20-1

/2"

(520

)

20-1

/2"

(520

)

20

-1/2

"(5

20)28

-3/8

" (7

20)

5-7/

8"(1

50)

13-3

/4"

(350

)

48-1

3/16

" (1

240

)

69-1

/4"

(176

0)

20-1

/2"

(520

)

20-1

/2"

(520

)

28-3

/8"

(720

)5-7/8"(150)

13-3

/4"

(350

)

48-1

3/16

" (1

240

)

69-1

/4"

(176

0)

20-1

/2"

(52)

MANET handles, single side13-3/4" (350) O.A.2-hole mounting for 3/8" (10) and 1/2" (12) glass thicknessRef. # 821.240

MANET handles, single side28-3/8" (720) O.A.2-hole mounting for 3/8" (10) and1/2" (12) glass thicknessRef. # 821.241

MANET handles, single side48-13/16 (1240) O.A.3-hole mounting for 3/8" (10) and1/2" (12) glass thicknessRef. # 821.242

MANET handles, single side69-5/16" (1760) O.A.4-hole mounting for 3/8" (10)1/2" (12) glass thicknessRef. # 821.243

MANET handles, back-to-back13-3/4" (350) O.A.2-hole mounting for 3/8" (10) and1/2" (12) glass thicknessRef. # 821.267

MANET handles, back-to-back28-3/8" (720) O.A.2-hole mounting for 3/8" (10) and1/2" (12) glass thicknessRef. # 821.270

MANET handles, back-to-back48-13/16 (1240) O.A.3-hole mounting for 3/8" (10) and1/2" (12) glass thicknessRef. # 821.273

MANET handles, back-to-back69-5/16" (1760) O.A.4-hole mounting for 3/8" (10)1/2" (12) glass thicknessRef. # 821.276

Single side with clamping disk single point mounting for 3/8" (10) and 1/2" (12) glass. 316L stainless steel base material.

Back-to-back including connecting bolt for 3/8" (10) and 1/2" (12) glass. 316L stainless steel base material.

MANET handles, back-to-back

15

MANET handles

MANET handles, glass fabrication

min. ca.2-9/16"

(65)

20-1

/2"

(521

)±

1/32

" (0

.3)

40-1

5/16

" (1

040

) ± 1/

64"

(0.3

)

61-3

/8"

(155

9 ±

1/64

" (0

.3)

min. ca.2-9/16"

(65)

5-7/

8"(1

50)

± 1/

32"

(0.3

)

HANDLE LENGTH13-3/4" (350)

Handle lengths28-3/8" (720)48-13/16" (124069-5/16" (1760)

MANET handles, glass hole details

SINGLE FIXING WITH CLAMPING DISKSINGLE POINT FIXING

3/8" (10)1/2" (12)

GLA

SS

HO

LE Ø

1-1/

16"

(Ø26

)

Ø1-

3/16

"(Ø

30)

BACK TO BACK FIXING WITH CONNECTING BOLT

3/8" (10)1/2" (12)

GLA

SS

HO

LE Ø

7/8"

(Ø22

)

Single point mounting with clamping disk

Back-to-back mounting with connecting bolt

Handle length13-3/4” (350)

16


ARCOS handles

ARCOS handle details

ARCOS glass fabrication

BUSHING

GRUBSCREW

CONNECTINGBOLT

CYLINDRICAL BORE

GLASSTHICKNESS

Ø5/8"(Ø16)Ø5/8"

(Ø16)

3-1/8"(79)

GLASSTHICKNESS

3-11/32"(85)

13-3

/4"

/ 29

-1/2

" (3

50 /

750

)D

RIL

L H

OLE

CEN

TER

S

15-1

1/16

" /

32-1

5/32

" (3

98 /

824

)

2-5/32"(55)

ARCOS Handles13-3/4" (350) C to C2-hole fixing for 3/8" (10)1/2" (12) glass thicknessRef. # 826.500

ARCOS Handles29-1/2" (750) C to C2-hole fixing for 3/8" (10)1/2" (12) glass thicknessRef. # 826.510

826.500 826.510

17

BEYOND handles

Economy pull handles (solid and tubular)

BEYOND handle details

10" (254) handles 12" (305) handles

Ø1-3/8"(Ø35)

L Ø1-3/8"(Ø35)

L

3-1/8"(80)

17-3

/4",

23-

5/8"

, 35-

7/16

"(4

50, 6

00

, 90

0)

3-1/8"(80 mm)

Ø7/8"

(Ø22)

Ø7/8"

(Ø22)

926.001

2-1/2"(64)

11"

(279

)10

" (2

54)

1"(25)

926.004

2-1/2"(64)

1"(25)

13"

(330

)12

" (3

05)

5/8" (16)GLASS CUT

5/8" (16)GLASS CUT

Handles, back-to-back pullstube, 10" (254)Ref. # 926.001 (solid)Ref. # 926.601 (tubular)

Handles, single side tube 10" (254)Ref. # 926.012 (solid)Ref. # 926.612 (tubular)

Handles, back-to-back pullstube, 12" (305)Ref. # 926.004 (solid)Ref. # 926.604 (tubular)

Handles, single side solid tube 12" (305)Ref. # 926.016 (solid)Ref. # 926.616 (tubular)

BEYOND handle for 3/8" (10) and 1/2" (12) glass, two-hole attach-ment.

Available finish(107) Similar to Satin Stainless finish.

Length (L) Ref. #17-3/4" (450) 830.300

23-5/8" (600) 830.305

35-7/16" (900) 830.310

ARCOS handles BEYOND handles Economy pull handles

18


4"(102)

4"(102)

3"(76)

3" (76)

1"(25)

13"

(330

)

12"

(30

5)

926.009

4"(102)

4"(102)

3"(76)

3" (76)

1"(25)

13"

(330

)

12"

(30

5)

926.009

926.022

4"(102)

3" (76)

4"(102)

3"(76)

11"

(279

)

10"

(254

)

1"(25)

926.022

4"(102)

3" (76)

4"(102)

3"(76)

11"

(279

)

10"

(254

)

1"(25)

5/8" (16)GLASS CUT 5/8" (16)GLASS

CUT

926.005

2-1/2"(64)

1"(25)

13"

(330

)12

" (3

05

2-1/

2"(6

4)

1" (25)

27-3/4" (705)28-23/32" (729)

926.005

2-1/2"(64)

1"(25)

13"

(330

)12

" (3

05

2-1/

2"(6

4)

1" (25)

27-3/4" (705)28-23/32" (729)

926.002

2-1/

2"(6

4)

27-3/4" (705)

28-23/32" (729)

2-1/2"(64)

31/32"(25)

11"

(279

)

10"

(254

)

1" (25)

926.002

2-1/

2"(6

4)27-3/4" (705)

28-23/32" (729)

2-1/2"(64)

31/32"(25)

11"

(279

)

10"

(254

)

1" (25)

5/8" (16)GLASS CUT

Economy pull handles (solid and tubular)

Push/pull handles

Offset back-to-back handle – 10" (254) Offset back-to-back handle – 12" (305)

Handles, back-to-back offsettube, 10" (254) offsetRef. # 926.622 (tubular)

Handles, back-to-back offsettube, 12” (305) offsetRef. # 926.009 (solid)Ref. # 926.609 (tubular)

Handles, push/pull, back-to-backtube, 10" (254) × 27-3/4" (705) Ref. # 926.002 (solid)Ref. # 926.602 (tubular)

Handles, push/pull, back-to-back tube, 12" (305) × 27-3/4" (705)Ref. # 926.005 (solid)Ref. # 926.605 (tubular)

5/8" (16)GLASS CUT

19

Economy pull handles Flush pulls and glass knobs

1-15/16"(50)

2-3/

4" (7

0 )

1/8"( 3.5) 3/8"

(10)

1-13/16"(46)

GLASS CUT

Flush pulls and glass knobs

Flush pullaluminum, to be glued onto the glass — requires glass cutRef. # 907.200

Glass knobØ1-15/32" (Ø37), projection 1-1/4" (32), glass prep: drill 3/8" or 1/2" (10 or 12) Ø hole for 3/8" or 1/2" (10 or 12) glass thicknessRef. # 906.999

DORMA USA, IncDorma Drive, Drawer ACReamstown, PA 17567800.523.8483

1.17C

T ∙

2M ∙

070

00

466

www.dormakaba.com

Architectural pulls and -...

Documents

Transcript of Architectural pulls and -...