APT4 18004000 4008 D20 N - d2f6h2rm95zg9t.cloudfront.net€¦ · The APT4‐18004000‐4008‐D20...

3
APT4180040004008D20N 1840 GHz Wideband Low Noise Amplifier Product Features Frequency Range = 18.0 to 40.0 GHz Typical Noise Figure = 3.0 dB Gain (typical) = 40 dB Typical Gain Flatness ± 2.5 dB Reverse voltage protection StateoftheArt PHEMT Technology MIL883, MIL45208 construction and reliability Internal DC regulator Hermetic seal option Can be epoxy painted for weatherproofing and use in ocean environment Product Description The APT4180040004008D20 is a wideband, medium gain low noise amplifier with good Flatness across the band. It is designed mainly for wideband telecommunications, such as for Military and Space, PointtoPoint Radios and Test Equipment. The input signal can be as large as +16 dBm. Applications Wideband Communication Systems Military & Space PointtoMultiPoint Radios Test Instrumentation PointtoMultiPoint Radios Radar Systems EW/ECM Communications Systems Parameters Unit Minimum Maximum Notes Operating Temperature (Case) °C 54 +85 95% humidity, noncondensing Storage Temperature (Case) °C 54 +115 95% humidity, noncondensing RF Input Power dBm +16 CW Die Junction Temp (Tj) °C +150 For GaAs devices Positive Supply Voltage V +16 At +V DC terminal Negative Voltage V 10 Reverse Voltage Absolute Maximum Ratings* * Stresses above those listed under "Absolute Maximum Rating" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. All STANDARD units are packaged in Aluminum housings that are layered with electroless Nickel and then plated with Gold to eliminate contamination of other adjacent electronic components. Typical Key Parameters at 23°C AmpliTech, Inc. 620 Johnson Avenue Bohemia, NY 11716 Phone: 6315217831 Fax: 16315217871 website: http://www.amplitechinc.com Parameters Unit Minimum Typical Maximum Notes Frequency GHz 18.0 40.0 Customizable Gain dB 40 40.5 Customizable Gain Flatness dB ±2.5 Customizable In/Out VSWR 1.9:1 2.5:1 Customizable Output P1dB dBm +8 +9 Customizable DC Power V@mA +11 +12 +16 @165mA Noise Figure dB 3.0 3.5 Customizable Outline/Package D20 1

Transcript of APT4 18004000 4008 D20 N - d2f6h2rm95zg9t.cloudfront.net€¦ · The APT4‐18004000‐4008‐D20...

Page 1: APT4 18004000 4008 D20 N - d2f6h2rm95zg9t.cloudfront.net€¦ · The APT4‐18004000‐4008‐D20 is a wideband, medium gain low noise amplifier with good Flatness across the band.

           APT4‐18004000‐4008‐D20‐N          18‐40 GHz Wideband Low Noise Amplifier 

     

Product Features  

Frequency Range = 18.0 to 40.0 GHz   

Typical Noise Figure = 3.0 dB 

Gain (typical) =  40 dB  

Typical Gain Flatness  ± 2.5 dB   Reverse voltage protection 

State‐of‐the‐Art PHEMT Technology 

MIL‐883, MIL‐45208 construction and reliability 

Internal DC regulator  

Hermetic seal option 

Can be epoxy painted for weatherproofing  and 

use in ocean environment 

Product Description   The APT4‐18004000‐4008‐D20 is a wideband, medium gain low noise amplifier with good Flatness across the band. It is designed mainly for wideband telecommunications, such as for Military and Space, Point‐to‐Point Radios and Test Equipment. The input signal can be as large as +16 dBm.            

    

Applications  

∙ Wideband Communication Systems ∙ Military & Space ∙ Point‐to‐Multi‐Point Radios ∙ Test Instrumentation ∙ Point‐to‐Multi‐Point Radios ∙ Radar Systems ∙ EW/ECM Communications Systems Parameters  Unit  Minimum  Maximum  Notes 

Operating Temperature  (Case) 

  

°C 

 ‐54 

  

+85 

95% humidity, non‐condensing 

Storage Temperature  (Case) 

 °C 

  

‐54 

  

+115 

95% humidity, non‐condensing 

RF Input Power   dBm  ‐  +16  CW 

Die Junction Temp  (Tj) 

 

°C ‐   

+150 For GaAs devices 

Positive Supply Voltage  V  ‐   

+16  

At +V DC terminal 

Negative Voltage  V  ‐  ‐10  Reverse Voltage 

Absolute Maximum Ratings*

*  Stresses  above  those  listed  under  "Absolute Maximum Rating" may cause permanent damage to   the device. This is a stress rating only and functional operation of the device at  these or any other  conditions above  those  indicated  in the operational sections of this specification  is not implied. Exposure  to  absolute  maximum  rating  conditions  for extended  periods  may  affect  device  reliability.  All STANDARD units are packaged  in Aluminum housings  that are  layered with  electro‐less  Nickel  and  then  plated with Gold  to  eliminate  contamination  of  other  adjacent electronic components. 

Typical Key Parameters at 23°C

   AmpliTech, Inc.  620 Johnson Avenue Bohemia, NY 11716  Phone: 631‐521‐7831 Fax: 1‐631‐521‐7871 

website: http://www.amplitechinc.com 

 

Parameters  Unit  Minimum  Typical  Maximum  Notes 

Frequency  GHz  18.0  ‐  40.0  Customizable 

Gain  dB  40  40.5  ‐  Customizable 

Gain Flatness  dB  ‐  ±2.5  ‐  Customizable 

In/Out VSWR  ‐  ‐  1.9:1  2.5:1  Customizable 

Output P1dB   dBm  +8  +9  ‐  Customizable 

DC Power  V@mA  +11  +12  +16  @165mA 

Noise Figure  dB  ‐  3.0  3.5  Customizable 

Outline/Package  ‐  ‐  ‐   ‐  D20 

Page 2: APT4 18004000 4008 D20 N - d2f6h2rm95zg9t.cloudfront.net€¦ · The APT4‐18004000‐4008‐D20 is a wideband, medium gain low noise amplifier with good Flatness across the band.

Typical Measured Data

   AmpliTech, Inc.  620 Johnson Avenue Bohemia, NY 11716  Phone: 631‐521‐7831 Fax: 1‐631‐521‐7871 

website: http://www.amplitechinc.com 

 

           APT4‐18004000‐4008‐D20‐N          18‐40 GHz Wideband Low Noise Amplifier 

     

Page 3: APT4 18004000 4008 D20 N - d2f6h2rm95zg9t.cloudfront.net€¦ · The APT4‐18004000‐4008‐D20 is a wideband, medium gain low noise amplifier with good Flatness across the band.

Outline Drawing

Note: Custom outline options available 

           APT4‐18004000‐4008‐D20‐N          18‐40 GHz Wideband Low Noise Amplifier