Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE...

21
Approved LockJaw Secured Enclosures 1

Transcript of Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE...

Page 1: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

Approved

LockJaw

Secured Enclosures

1

Page 2: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

Legend

Contact:

Matt Stockbridge – National Sales Manager

office: 951.787.0600 | mobile: 530.613.6096 | fax: 951.750.5984

2626 Kansas Ave. | Riverside, CA 92507 | newbasis.com

CalTrans

CONVERSION

Part Number Width x Length Depth (xx) Load Rating Assembly Weight Page # Price No.

PCA111812-90084 11 1/4" x 18" 12" 33,750 lbs / Tier 22 59 lbs. 3 280.00$ No. 3 1/2

PCA111818-90038 11 1/4" x 18" 18" 33,750 lbs / Tier 22 71 lbs. 3 291.00$ No. 3 1/2 -18" depth

PCA132412-90134 13 3/4" x 23 1/4" 12" 33,750 lbs / Tier 22 83 lbs. 5 301.00$ No.5

PCA132418-90098 13 3/4" x 23 1/4" 18" 33,750 lbs / Tier 22 112 lbs. 5 333.00$ No. 5 - 18" depth

PCA132424-90028 13 3/4" x 23 1/4" 24" 33,750 lbs / Tier 22 127 lbs. 5 359.32$ No. 5 - 24" depth

PCA173012-90091 17 1/2" x 30 1/2" 12" 33,750 lbs / Tier 22 111 lbs. 7 388.74$ No. 6

PCA173018-90106 17 1/2" x 30 1/2" 18" 33,750 lbs / Tier 22 131 lbs. 7 410.00$ No. 6 - 18" depth

PCA173024-90128 17 1/2" x 30 1/2" 24" 33,750 lbs / Tier 22 149 lbs. 7 418.00$ No. 6 - 24" depth

PCA173030-90045 17 1/2" x 30 1/2" 30" 33,750 lbs / Tier 22 169 lbs. 7 449.87$ No. 6 - 30" depth

PCA243618-90105 24" x 35 5/8" 18" 33,750 lbs / Tier 22 315 lbs. 9 854.00$

PCA243624-90272 24" x 35 5/8" 24" 33,750 lbs / Tier 22 404 lbs. 9 871.00$

PCA243630-90072 24" x 35 5/8" 30" 33,750 lbs / Tier 22 412 lbs 9 887.00$

PCA243636-90174 24" x 35 5/8" 36" 33,750 lbs / Tier 22 445 lbs 9 898.00$

PCA243642-90026 24" x 35 5/8" 42" 33,750 lbs / Tier 22 474 lbs 9 912.00$

PCA243648-90021 24" x 35 5/8" 48" 33,750 lbs / Tier 22 528 lbs 9 942.00$

PCA304818-90052 30 1/8" x 47 5/8" 18" 33,750 lbs / Tier 22 477 lbs. 11 1,012.00$

PCA304824-90114 30 1/8" x 47 5/8" 24" 33,750 lbs / Tier 22 543 lbs. 11 1,101.00$

PCA304830-90042 30 1/8" x 47 5/8" 30" 33,750 lbs / Tier 22 604 lbs. 11 1,118.00$

PCA304836-90278 30 1/8" x 47 5/8" 36" 33,750 lbs / Tier 22 665 lbs. 11 1,183.00$

PCA304848-90075 30 1/8" x 47 5/8" 48" 33,750 lbs / Tier 22 785 lbs. 11 1,195.00$

CalTrans

CONVERSION

Part Number Width x Length Fits Load Rating Cover Weight Page # Price No.

PCC1015P1-90004 10 1/16" x 15 1/2" x 1 3/4" Precast Box 33,750 lbs / Tier 22 23 lbs. 13 $165.00 No. 3.5 Precast

PCC1118P1-90031 11 1/4" x 18" x 2" Polymer Box 33,750 lbs / Tier 22 32 lbs. 14 $171.00 No. 3.5

PCC1324P1-90069 13 3/4" x 23 1/4" x 2" Polymer Box 33,750 lbs / Tier 22 48 lbs. 15 $199.00 No. 5

PCC1324P1-90066 13 3/4" x 23 1/4" x 2" Precast Box 33,750 lbs / Tier 22 48 lbs. 16 $199.00 No. 5 Precast

PCC1730P1-90090 17 1/2" x 30 1/2" x2" Polymer Box 33,750 lbs / Tier 22 74 lbs. 17 $238.00 No. 6

PCC1730P1-90087 17 1/2" x 30 1/2" x2" Precast Box 33,750 lbs / Tier 22 74 lbs. 18 $238.00 No. 6 Precast

PCC2436P2-90049 24" x 35 5/8" x 3" Polymer Box 33,750 lbs / Tier 22 57 lbs. 19 $671.00

PCC3048P2-90082 30 1/8" x 47 5/8" x 3" Polymer Box 33,750 lbs / Tier 22 96 lbs. 20 $798.00

LockJaw Cover Only

LockJaw Assemblies

Lock

Jaw

Co

ve

r a

nd

Bo

x A

sse

mb

lyLo

ckJa

w C

ov

er

On

ly

2

Page 3: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

19 3/4"

13"

18"

11 1/4"

2"

XX 13"

4 3/4"

4 3/4"

5 1/8"

GROUND LUG(4-14 AWG

GROUND WIRE) GROUND LUG DETAIL(1 PLACE EACH LOCKJAW)

11" X 18" X XX"(For actual dimensions see drawing) Polymer Concrete Assembly, Straight Sides, No Floor, WUC 3.6, ANSI/SCTE 77-''T22/32K,'' LockJaw Security Cover, 4" Conduit Mouseholes, Standard Nameplate (Specify at time of order) Shipped Separately

PCA1118XX-LCKJW

Rev: A.1

MOUSEHOLE DETAIL(2 PLACE EACH END)

LOCKJAW ASSEMBLIESPIP # XX BOX WEIGHT ASSEMBLY WEIGHT LOADED PALLET WEIGHT PALLET QTY.

PCA111812-90084 12" 34.8 lbs 58.9 lbs 1,276.3 21

PCA111818-90038 18" 46.9 lbs 71 lbs 1,526.4 21

PCX POLYMER CONCRETE ASSEMBLY

LOAD RATINGS

FEATURES:

Additional product information continued on the reverse

Composites for Infrastructure2626 Kansas AvenueRiverside, California 92507

Incidental Traffic - Parking Lot, SidewalkConforms to: • WUC 3.6 • ASTM C 857 • ANSI/SCTE 77

• USDA/RUS Approved• UL Classified Polymer Concrete• Cast-In nameplate• Shipped assembled• Skid resistant cover• Stainless steel bolts• Cast-in floating nut box - Integral drain holes

951.787.0600

951.787.0632 (fax)[email protected]

newbasis.com

3

CalTrans No. 3 1/2

See below part

numbers for

needed depth

Page 4: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

40 1/2"

48" 40"

REF SHEET 1 FOR ACTUAL PALLET QUANTITY. REPRESENTATION ONLY

NAMEPLATELOCATION

RFID SMART TAG INSIDE BOX

OPEN BOTTOM

LOCKJAW COVER

MOUSEHOLES(2 TOTAL)

Polymer Concrete Assembly, Straight Sides, No Floor, WUC 3.6, ANSI/SCTE 77 ''T22/32K,'' LockJaw Security Cover, 4" Conduit Mouseholes, Standard Nameplate (Specify at time or order) Shipped Separately 11" X 18" X XX"

Rev: A.1

Tier 22 Load RatingPenta BoltsTelephone EMSPower EMSSipra LockJaw Security CoverLockJaw Grounding LugMouseholesCustom StencilCustom Nameplate InstalledCustom Nameplate Shipped SeparatelyCustom Nameplate Cast-inStandard Nameplate InstalledStandard Nameplate Shipped SeparatelyStandard Nameplate Cast-in

PCA1118XX-LCKJW

24.1 lbs. SEETABLE

PCX POLYMER CONCRETE ASSEMBLY

For actual dimensions, see drawing on front side.

AVAILABLE OPTIONS NAMEPLATESOne standard nameplate included witheach assembly, installed at the factory oreasily installed in the field. Customnameplates are available. Contactcustomer service.

Standard Nameplates

MATERIAL PROPERTIESAND ATTRIBUTES

Compressive StrengthPolymer Concrete - 11,500 PSIPer ASTM D695

Flexural StrengthPolymer Concrete - 4,000 PSIPer ASTM D790

Coefficient of Friction (Dry)1.085Per ASTM C1028

WEIGHTS AND SHIPPING

Standard shipping includes van deliveryof pallet quantities to the lower 48 states.Partial pallet quantities and flat bedshipping available at an additional cost.

PALLET QUANTITY:

• Electric• Telephone• Fiber Optic• Street Lighting• Traffic• CATV• Communications

PACKAGING

Materials tested in accordance with ASTM D-543 and ASTM D-570

- Indicates a selected option

COVER WEIGHT:

(REF. SHEET 1 FOR ADDITIONAL WEIGHTS.)

(Steel Banding, Edge Protection)

Polymer Concrete - Advanced composite: Very high strength to weight ratio - Non-metallic - Non-conductive - UV Resistant - High impact resistant - Impervious to chemicals and moisture

4

Page 5: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

23 3/8"

13 7/8"

15 1/2"

25"

XX

2"

6 1/2"

4 3/4"

4 3/4"

GROUND LUG(4-14 AWG

GROUND WIRE) GROUND LUG DETAIL(1 PLACE EACH LOCKJAW)

13" X 24" X XX"(For actual dimensions see drawing) Polymer Concrete Assembly, Straight Sides, No Floor, WUC 3.6, ANSI/SCTE 77-''T22/32K,'' LockJaw Security Cover, 4" Conduit Mouseholes, Standard Nameplate (Specify at time of order) Shipped Separately

PCA1324XX-LCKJW

Rev: A.1

MOUSEHOLE DETAIL(2 PLACE EACH END)

LOCKJAW ASSEMBLIESPIP # XX BOX WEIGHT ASSEMBLY WEIGHT LOADED PALLET WEIGHT PALLET QTY.

PCA132412-90134 12" 52.3 lbs 82.3 lbs. 1,277.3 lbs 15PCA132418-90098 18" 73.4 lbs 111.7 lbs 1,159.8 lbs 10PCA132424-90028 24" 94.1 lbs 127. lbs 1,240 lbs 10

PCX POLYMER CONCRETE ASSEMBLY

LOAD RATINGS

FEATURES:

Additional product information continued on the reverse

Composites for Infrastructure2626 Kansas AvenueRiverside, California 92507

Incidental Traffic - Parking Lot, SidewalkConforms to: • WUC 3.6 • ASTM C 857 • ANSI/SCTE 77

• USDA/RUS Approved• UL Classified Polymer Concrete• Cast-In nameplate• Shipped assembled• Skid resistant cover• Stainless steel bolts• Cast-in floating nut box - Integral drain holes

951.787.0600

951.787.0632 (fax)[email protected]

newbasis.com

5

CalTrans No. 5

See below part

numbers for

needed depth

Page 6: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

40 1/2"

48" 40"

LOCKJAW COVER

OPEN BOTTOM

RFID SMART TAG INSIDE BOX

NAMEPLATE LOCATION

MOUSEHOLES(2 TOTAL)

Polymer Concrete Assembly, Straight Sides, No Floor, WUC 3.6, ANSI/SCTE 77 ''T22/32K,'' LockJaw Security Cover, 4" Conduit Mouseholes, Standard Nameplate (Specify at time or order) Shipped Separately 13" X 24" X XX"

Rev: A.1

Tier 22 Load RatingPenta BoltsTelephone EMSPower EMSSipra LockJaw Security CoverLockJaw Grounding LugMouseholesCustom StencilCustom Nameplate InstalledCustom Nameplate Shipped SeparatelyCustom Nameplate Cast-inStandard Nameplate InstalledStandard Nameplate Shipped SeparatelyStandard Nameplate Cast-in

PCA1324XX-LCKJW

29.6 lbs. SEETABLE

REF SHEET 1 FOR ACTUAL PALLET QUANTITY. REPRESENTATION ONLY

PCX POLYMER CONCRETE ASSEMBLY

For actual dimensions, see drawing on front side.

AVAILABLE OPTIONS NAMEPLATESOne standard nameplate included witheach assembly, installed at the factory oreasily installed in the field. Customnameplates are available. Contactcustomer service.

Standard Nameplates

MATERIAL PROPERTIESAND ATTRIBUTES

Compressive StrengthPolymer Concrete - 11,500 PSIPer ASTM D695

Flexural StrengthPolymer Concrete - 4,000 PSIPer ASTM D790

Coefficient of Friction (Dry)1.085Per ASTM C1028

WEIGHTS AND SHIPPING

Standard shipping includes van deliveryof pallet quantities to the lower 48 states.Partial pallet quantities and flat bedshipping available at an additional cost.

PALLET QUANTITY:

• Electric• Telephone• Fiber Optic• Street Lighting• Traffic• CATV• Communications

PACKAGING

Materials tested in accordance with ASTM D-543 and ASTM D-570

- Indicates a selected option

COVER WEIGHT:

(REF. SHEET 1 FOR ADDITIONAL WEIGHTS.)

(Steel Banding, Edge Protection)

Polymer Concrete - Advanced composite: Very high strength to weight ratio - Non-metallic - Non-conductive - UV Resistant - High impact resistant - Impervious to chemicals and moisture

6

Page 7: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

30 5/8"

17 5/8" 2"

32 1/4"

XX 19 1/4"

4 3/4"

8"

4 3/4"

GROUND LUG(4-14 AWG

GROUND WIRE) GROUND LUG DETAIL(1 PLACE EACH LOCKJAW)

17" X 30" X XX"(For actual dimensions see drawing) Polymer Concrete Assembly, Straight Sides, No Floor, WUC 3.6, ANSI/SCTE 77-''T22/32K,'' LockJaw Security Cover, 4" Conduit Mouseholes, Standard Nameplate (Specify at time of order) Shipped Separately

PCA1730XX-LCKJW

Rev: A.1

LOCKJAW ASSEMBLIESPIP # XX BOX WEIGHT ASSEMBLY WEIGHT LOADED PALLET WEIGHT PALLET QTY.

PCA173012-90091 12" 60.7 lbs 111 lbs. 1,0418 lbs 9PCA173018-90106 18" 80.3 lbs 130.6 lbs 822 lbs 6PCA173024-90128 24" 99.6 lbs 149.9 lbs 942.2 lbs 6PCA173030-90045 30" 118.5 lbs 168.8 lbs 1,012.6 lbs 6

PCX POLYMER CONCRETE ASSEMBLY

LOAD RATINGS

FEATURES:

Additional product information continued on the reverse

Composites for Infrastructure2626 Kansas AvenueRiverside, California 92507

Incidental Traffic - Parking Lot, SidewalkConforms to: • WUC 3.6 • ASTM C 857 • ANSI/SCTE 77

• USDA/RUS Approved• UL Classified Polymer Concrete• Cast-In nameplate• Shipped assembled• Skid resistant cover• Stainless steel bolts• Cast-in floating nut box - Integral drain holes

951.787.0600

951.787.0632 (fax)[email protected]

newbasis.com

7

CalTrans No. 6

See below part

numbers for

needed depth

Page 8: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

RFID SMART TAG INSIDE BOX

OPEN BOTTOM

NAMEPLATE LOCATIONLOCKJAW COVER

MOUSEHOLES(2 TOTAL)

40 5/8"

55" 40"

REF SHEET 1 FOR ACTUAL PALLET QUANTITY. REPRESENTATION ONLY

Polymer Concrete Assembly, Straight Sides, No Floor, WUC 3.6, ANSI/SCTE 77 ''T22/32K,'' LockJaw Security Cover, 4" Conduit Mouseholes, Standard Nameplate (Specify at time or order) Shipped Separately 17" X 30" X XX"

Rev: A.1

Tier 22 Load RatingPenta BoltsTelephone EMSPower EMSSipra LockJaw Security CoverLockJaw Grounding LugMouseholesCustom StencilCustom Nameplate InstalledCustom Nameplate Shipped SeparatelyCustom Nameplate Cast-inStandard Nameplate InstalledStandard Nameplate Shipped SeparatelyStandard Nameplate Cast-in

PCA1730XX-LCKJW

50.3 lbs. SEETABLE

PCX POLYMER CONCRETE ASSEMBLY

For actual dimensions, see drawing on front side.

AVAILABLE OPTIONS NAMEPLATESOne standard nameplate included witheach assembly, installed at the factory oreasily installed in the field. Customnameplates are available. Contactcustomer service.

Standard Nameplates

MATERIAL PROPERTIESAND ATTRIBUTES

Compressive StrengthPolymer Concrete - 11,500 PSIPer ASTM D695

Flexural StrengthPolymer Concrete - 4,000 PSIPer ASTM D790

Coefficient of Friction (Dry)1.085Per ASTM C1028

WEIGHTS AND SHIPPING

Standard shipping includes van deliveryof pallet quantities to the lower 48 states.Partial pallet quantities and flat bedshipping available at an additional cost.

PALLET QUANTITY:

• Electric• Telephone• Fiber Optic• Street Lighting• Traffic• CATV• Communications

PACKAGING

Materials tested in accordance with ASTM D-543 and ASTM D-570

- Indicates a selected option

COVER WEIGHT:

(REF. SHEET 1 FOR ADDITIONAL WEIGHTS.)

(Steel Banding, Edge Protection)

Polymer Concrete - Advanced composite: Very high strength to weight ratio - Non-metallic - Non-conductive - UV Resistant - High impact resistant - Impervious to chemicals and moisture

8

Page 9: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

24" 35 5/8" 17 3/4" 3"

37 5/8"

XX 26"

3 7/8"

7 3/4"

4 3/4"

4 3/4"

GROUND LUG(4-14 AWG

GROUND WIRE)

24" X 36" X XX"(For actual dimensions see drawing) Polymer Concrete Assembly, Straight Sides, No Floor, WUC 3.6, ANSI/SCTE 77-''T22/32K,'' LockJaw Security Cover, 4" Conduit Mouseholes, Standard Nameplate (Specify at time of order) Shipped Separately

PCA2436XX-LCKJW

Rev: A.1

MOUSEHOLE DETAIL(2 PLACE EACH END)

GROUND LUG DETAIL(1 PLACE EACH LOCKJAW)

LOCKJAW ASSEMBLIESPIP # XX BOX WEIGHT ASSEMBLY WEIGHT LOADED PALLET WEIGHT PALLET QTY.

PCA243618-90105 18" 200.6 lbs 315.1 lbs. 2,563.6 lbs 8PCA243624-90272 24" 244.4 lbs 404.6 lbs 2,470 lbs 6PCA243630-90072 30" 287.6 lbs 402.5 lbs 1,781 lbs 4PCA243636-90174 36" 330.1 lbs 445 lbs 1,822.8 lbs 4PCA243642-90026 42" 359.2 lbs 474.1 lbs 991 lbs 2PCA243648-90021 48" 413.3 lbs 528.1 lbs 1,099.1 lbs 2

PCX POLYMER CONCRETE ASSEMBLY

LOAD RATINGS

FEATURES:

Additional product information continued on the reverse

Composites for Infrastructure2626 Kansas AvenueRiverside, California 92507

Incidental Traffic - Parking Lot, SidewalkConforms to: • WUC 3.6 • ASTM C 857 • ANSI/SCTE 77

• USDA/RUS Approved• UL Classified Polymer Concrete• Cast-In nameplate• Shipped assembled• Skid resistant cover• Stainless steel bolts• Cast-in floating nut box - Integral drain holes

951.787.0600

951.787.0632 (fax)[email protected]

newbasis.com

9

Page 10: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

NAMEPLATE LOCATION

RFID SMART TAG INSIDE BOX

OPEN BOTTOM

LIFT PIN HAND HOLE COVER HOOK (NEWBASIS P/N: 0701 OR EQUIVALENT)

MOUSEHOLES(4 TOTAL)

76 1/2"

55" 40"

Polymer Concrete Assembly, Straight Sides, No Floor, WUC 3.6, ANSI/SCTE 77 ''T22/32K,'' LockJaw Security Cover, 4" Conduit Mouseholes, Standard Nameplate (Specify at time or order) Shipped Separately 24" X 36" X XX"

Rev: A.1

Tier 22 Load RatingPenta BoltsTelephone EMSPower EMSSipra LockJaw Security CoverLockJaw Grounding LugMouseholesCustom StencilCustom Nameplate InstalledCustom Nameplate Shipped SeparatelyCustom Nameplate Cast-inStandard Nameplate InstalledStandard Nameplate Shipped SeparatelyStandard Nameplate Cast-in

PCA2436XX-LCKJW

57.4 lbs. (EA.HALF) SEETABLE

REF SHEET 1 FOR ACTUAL PALLET QUANTITY. REPRESENTATION ONLY

PCX POLYMER CONCRETE ASSEMBLY

For actual dimensions, see drawing on front side.

AVAILABLE OPTIONS NAMEPLATESOne standard nameplate included witheach assembly, installed at the factory oreasily installed in the field. Customnameplates are available. Contactcustomer service.

Standard Nameplates

MATERIAL PROPERTIESAND ATTRIBUTES

Compressive StrengthPolymer Concrete - 11,500 PSIPer ASTM D695

Flexural StrengthPolymer Concrete - 4,000 PSIPer ASTM D790

Coefficient of Friction (Dry)1.085Per ASTM C1028

WEIGHTS AND SHIPPING

Standard shipping includes van deliveryof pallet quantities to the lower 48 states.Partial pallet quantities and flat bedshipping available at an additional cost.

PALLET QUANTITY:

• Electric• Telephone• Fiber Optic• Street Lighting• Traffic• CATV• Communications

PACKAGING

Materials tested in accordance with ASTM D-543 and ASTM D-570

- Indicates a selected option

COVER WEIGHT:

(REF. SHEET 1 FOR ADDITIONAL WEIGHTS.)

(Steel Banding, Edge Protection)

Polymer Concrete - Advanced composite: Very high strength to weight ratio - Non-metallic - Non-conductive - UV Resistant - High impact resistant - Impervious to chemicals and moisture

10

Page 11: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

47 1/2"

23 3/4" 30 1/8"

49 5/8"

XX 32 1/8"

3"

11 1/2"

4 3/4"

5 3/4"

4 3/4"

GROUND LUG(4-14 AWG

GROUND WIRE)

30" X 48" X XX"(For actual dimensions see drawing) Polymer Concrete Assembly, Straight Sides, No Floor, WUC 3.6, ANSI/SCTE 77-''T22/32K,'' LockJaw Security Cover, Ø4" Conduit Mouseholes, Standard Nameplate (Specify at time of order) Shipped Separately

PCA3048XX-LCKJW

Rev: A.1

GROUND LUG DETAIL(1 PLACE EACH LOCKJAW)

MOUSEHOLE DETAIL(2 PLACE EACH END)

LOCKJAW ASSEMBLIESPIP # XX BOX WEIGHT ASSEMBLY WEIGHT LOADED PALLET WEIGHT PALLET QTY.

PCA304818-90052 18" 284.9 lbs 477.4 lbs. 1,935.6 lbs 4PCA304824-90114 24" 350.1 lbs 543.5 lbs 1,656.5 lbs 3PCA304830-90042 30" 411.3 lbs 604.7 lbs 1,235.5 lbs 2PCA304836-90278 36" 471.8 lbs 665.3 lbs 1,356.5 lbs 2PCA304848-90075 48" 591.7 lbs 785.1 lbs 1,596.2 lbs 2

PCX POLYMER CONCRETE ASSEMBLY

LOAD RATINGS

FEATURES:

Additional product information continued on the reverse

Composites for Infrastructure2626 Kansas AvenueRiverside, California 92507

Incidental Traffic - Parking Lot, SidewalkConforms to: • WUC 3.6 • ASTM C 857 • ANSI/SCTE 77

• USDA/RUS Approved• UL Classified Polymer Concrete• Drop-In nameplate• Shipped assembled• Skid resistant cover• Stainless steel bolts• Cast-in floating nut box - Integral drain holes

951.787.0600

951.787.0632 (fax)[email protected]

newbasis.com

11

Page 12: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

LIFT PIN HAND HOLE COVER HOOK (NEWBASIS P/N: 0701 OR EQUIVALENT)

NAMEPLATE LOCATION

RFID SMART TAG INSIDE BOX

OPEN BOTTOM LIFT BOLTS TO ACCOMODATE LIFT STRAPSMOUSEHOLES

(4 TOTAL)

45"

28"

76 1/2"

Polymer Concrete Assembly, Straight Sides, No Floor, WUC 3.6, ANSI/SCTE 77-''T22/32K,'' LockJaw Security Cover, Ø4" Conduit Mouseholes, Standard Nameplate (Specify at time of order) Shipped Separately 30" X 48" X XX"

Rev: A.1

Tier 22 Load RatingPenta BoltsTelephone EMSPower EMSSipra LockJaw Security CoverLockJaw Grounding LugMouseholesCustom StencilCustom Nameplate InstalledCustom Nameplate Shipped SeparatelyCustom Nameplate Cast-inStandard Nameplate InstalledStandard Nameplate Shipped SeparatelyStandard Nameplate Cast-in

PCA3048XX-LCKJW

96.72 lbs. (EA.HALF) SEETABLE

REF SHEET 1 FOR ACTUAL PALLET QUANTITY. REPRESENTATION ONLY

PCX POLYMER CONCRETE ASSEMBLY

For actual dimensions, see drawing on front side.

AVAILABLE OPTIONS NAMEPLATESOne standard nameplate included witheach assembly, installed at the factory oreasily installed in the field. Customnameplates are available. Contactcustomer service.

Standard Nameplates

MATERIAL PROPERTIESAND ATTRIBUTES

Compressive StrengthPolymer Concrete - 11,500 PSIPer ASTM D695

Flexural StrengthPolymer Concrete - 4,000 PSIPer ASTM D790

Coefficient of Friction (Dry)1.085Per ASTM C1028

WEIGHTS AND SHIPPING

Standard shipping includes van deliveryof pallet quantities to the lower 48 states.Partial pallet quantities and flat bedshipping available at an additional cost.

PALLET QUANTITY:

• Electric• Telephone• Fiber Optic• Street Lighting• Traffic• CATV• Communications

PACKAGING

Materials tested in accordance with ASTM D-543 and ASTM D-570

- Indicates a selected option

COVER WEIGHT:

(REF. SHEET 1 FOR ADDITIONAL WEIGHTS.)

(Steel Banding, Edge Protection)

Polymer Concrete - Advanced composite: Very high strength to weight ratio - Non-metallic - Non-conductive - UV Resistant - High impact resistant - Impervious to chemicals and moisture

12

Page 13: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

R1 1/8"

15 1/2"

10 1/16"

NON-SKID SURFACE

NAMEPLATE LOCATION

1 3/4"

INCORPORATING SIPRA LOCKJAW SECURITY

PCC1015P1-90004Sipra LockJaw Secuity Cover

10" X 15" X 2"(FOR ACTUAL DIMENSIONS, SEE DRAWING)

Polymer Concrete Cover, Non-Skid Surface, Sipra LockJaw Security

REV: A.1

Composites for Infrastructure2626 Kansas AvenueRiverside, California 92507

951.787.0600

951.787.0632 (fax)[email protected]

newbasis.com

Flexural StrengthPolymer Concrete - 4,000 PSI(Flex Modulus) Per ASTM D790

MATERIAL PROPERTIESAND ATTRIBUTES

AVAILABLE OPTIONS• Penta head bolt kit• Hex head bolt kit• Standard nameplate• Custom nameplate• Power EMS• Telephone EMS

Cover Weight: 23.3 lbs.

Coefficient of Friction (Dry)1.085 Per ASTM C1028

Compressive StrengthPolymer Concrete - 11,500 PSIPer ASTM D695

13

FOR EXISTING PRECAST CONCRETE VAULTS

CalTrans No. 3 1/2

PRECAST

Page 14: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

R1"

18"

11 1/4"

NAMEPLATE LOCATION

NON-SKID SURFACE

2"

INCORPORATING SIPRA LOCKJAW SECURITY

PCC1118P1-90031Sipra LockJaw Secuity Cover

11" X 18" X 2"(FOR ACTUAL DIMENSIONS, SEE DRAWING)

Polymer Concrete Cover, Non-Skid Surface, WUC 3.6, ANSI/SCTE 77-"T22/32K," Sipra LockJaw Security, Custom Nameplate (Specify at time of order) Installed

REV: A.0

Composites for Infrastructure2626 Kansas AvenueRiverside, California 92507

951.787.0600

951.787.0632 (fax)[email protected]

newbasis.com

Flexural StrengthPolymer Concrete - 4,000 PSI(Flex Modulus) Per ASTM D790

MATERIAL PROPERTIESAND ATTRIBUTES

AVAILABLE OPTIONS• Penta head bolt kit• Hex head bolt kit• Standard nameplate• Custom nameplate• Power EMS• Telephone EMS

Cover Weight: 32.0 lbs.

Coefficient of Friction (Dry)1.085 Per ASTM C1028

Compressive StrengthPolymer Concrete - 11,500 PSIPer ASTM D695

14

CalTrans No. 3 1/2

Polymer Boxes

Page 15: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

R1 1/2"

23 1/4"

13 3/4"

NAMEPLATE LOCATION

NON-SKID SURFACE

2"

INCORPORATING SIPRA LOCKJAW SECURITY

PCC1324P1-90069Sipra LockJaw Secuity Cover

13" X 24" X 2"(FOR ACTUAL DIMENSIONS, SEE DRAWING)

Polymer Concrete Cover, Non-Skid Surface, WUC 3.6, ANSI/SCTE 77-"T22/32K," Sipra LockJaw Security, Custom Nameplate (Specify at time of order) Installed

REV: A.0

Composites for Infrastructure2626 Kansas AvenueRiverside, California 92507

951.787.0600

951.787.0632 (fax)[email protected]

newbasis.com

Flexural StrengthPolymer Concrete - 4,000 PSI(Flex Modulus) Per ASTM D790

MATERIAL PROPERTIESAND ATTRIBUTES

AVAILABLE OPTIONS• Penta head bolt kit• Hex head bolt kit• Standard nameplate• Custom nameplate• Power EMS• Telephone EMS

Cover Weight: 47.9 lbs.

Coefficient of Friction (Dry)1.085 Per ASTM C1028

Compressive StrengthPolymer Concrete - 11,500 PSIPer ASTM D695

15

CalTrans No. 5 Polymer Boxes

Page 16: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

13 3/4"

23 1/4"

R1 1/2"

NAMEPLATE LOCATION

NON-SKID SURFACE

2"

INCORPORATING SIPRA LOCKJAW SECURITY

PCC1324P1-90066Sipra LockJaw Secuity Cover

13" X 24" X 2"(FOR ACTUAL DIMENSIONS, SEE DRAWING)

Polymer Concrete Cover, Non-Skid Surface, Sipra LockJaw Security

REV: A.1

Composites for Infrastructure2626 Kansas AvenueRiverside, California 92507

951.787.0600

951.787.0632 (fax)[email protected]

newbasis.com

Flexural StrengthPolymer Concrete - 4,000 PSI(Flex Modulus) Per ASTM D790

MATERIAL PROPERTIESAND ATTRIBUTES

AVAILABLE OPTIONS• Penta head bolt kit• Hex head bolt kit• Standard nameplate• Custom nameplate• Power EMS• Telephone EMS

Cover Weight: 47.9 lbs.

Coefficient of Friction (Dry)1.085 Per ASTM C1028

Compressive StrengthPolymer Concrete - 11,500 PSIPer ASTM D695

16

FOR EXISTING PRECAST CONCRETE VAULTS

CalTrans No. 5 PRECAST

Page 17: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

R1 3/8"

30 1/2"

17 1/2"

NON-SKID SURFACE

NAMEPLATE LOCATION

2"

INCORPORATING SIPRALOCKJAW SECURITY

PCC1730P1-90090Sipra LockJaw Secuity Cover

17" X 30" X 2"(FOR ACTUAL DIMENSIONS, SEE DRAWING)

Polymer Concrete Cover, Non-Skid Surface, WUC 3.6, ANSI/SCTE 77-"T22/32K," Sipra LockJaw Security, Custom Nameplate (Specify att ime of order) Installed

REV: A.0

Composites for Infrastructure2626 Kansas AvenueRiverside, California 92507

951.787.0600

951.787.0632 (fax)[email protected]

newbasis.com

Flexural StrengthPolymer Concrete - 4,000 PSI(Flex Modulus) Per ASTM D790

MATERIAL PROPERTIESAND ATTRIBUTES

AVAILABLE OPTIONS• Penta head bolt kit• Hex head bolt kit• Standard nameplate• Custom nameplate• Power EMS• Telephone EMS

Cover Weight: 74.8 lbs.

Coefficient of Friction (Dry)1.085 Per ASTM C1028

Compressive StrengthPolymer Concrete - 11,500 PSIPer ASTM D695

17

CalTrans No. 6 Polymer Boxes

Page 18: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

17 1/2"

30 1/2"

R1 3/8"

NAMEPLATE LOCATIONS

NON-SKID SURFACE

2"

INCORPORATING SIPRALOCKJAW SECURITY

PCC1730P1-90087Sipra LockJaw Secuity Cover

17" X 30" X 2"(FOR ACTUAL DIMENSIONS, SEE DRAWING)

Polymer Concrete Cover, Non-Skid Surface, Sipra LockJaw Security

REV: A.1

Composites for Infrastructure2626 Kansas AvenueRiverside, California 92507

951.787.0600

951.787.0632 (fax)[email protected]

newbasis.com

Flexural StrengthPolymer Concrete - 4,000 PSI(Flex Modulus) Per ASTM D790

MATERIAL PROPERTIESAND ATTRIBUTES

AVAILABLE OPTIONS• Penta head bolt kit• Hex head bolt kit• Standard nameplate• Custom nameplate• Power EMS• Telephone EMS

Cover Weight: 74.8 lbs.

Coefficient of Friction (Dry)1.085 Per ASTM C1028

Compressive StrengthPolymer Concrete - 11,500 PSIPer ASTM D695

18

FOR EXISTING PRECAST CONCRETE VAULTS

CalTrans No. 6 PRECAST

Page 19: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

24"

35 5/8"

3"

17 3/4"

GROUND LUG(4-14 AWG

GROUND WIRE)

PCC2436P2-90049PCX POLYMER CONCRETE COVER

Polymer Concrete Cover, WUC 3.6, ANSI/SCTE 77 - "T22/32K," Non-Skid Surface, 2 Piece Cover, Sipra LockJaw Security Cover, Standard Nameplate (Specify at time of order) Shipped Separately

REV: A.0

GROUND LUG DETAIL(1 PLACE EACH LOCKJAW)Composites for Infrastructure

2626 Kansas AvenueRiverside, California 92507

951.787.0600

951.787.0632 (fax)[email protected]

newbasis.com

Flexural StrengthPolymer Concrete - 4,000 PSI(Flex Modulus) Per ASTM D790

MATERIAL PROPERTIESAND ATTRIBUTES

AVAILABLE OPTIONS• Standard nameplate• Custom nameplate• Power EMS• Telephone EMS

Cover Weight: 57.4 lbs. (ea. half)

Coefficient of Friction (Dry)1.085 Per ASTM C1028

Compressive StrengthPolymer Concrete - 11,500 PSIPer ASTM D695

19

Page 20: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

30 1/8"

47 5/8"

23 3/4"

3"

GROUND LUG(4-14 AWG

GROUND WIRE)

PCC3048P2-90082PCX POLYMER CONCRETE COVER

Polymer Concrete Cover, WUC 3.6, ANSI/SCTE 77 - ''T22/32K,'' Non-Skid Surface, 2 Piece Cover, Sipra LockJaw Security Cover, Standard Nameplate (Specify at time of order) Shipped Separately

REV: A.0

GROUND LUG DETAIL(1 PLACE EACH LOCKJAW)

Composites for Infrastructure2626 Kansas AvenueRiverside, California 92507

951.787.0600

951.787.0632 (fax)[email protected]

newbasis.com

Flexural StrengthPolymer Concrete - 4,000 PSI(Flex Modulus) Per ASTM D790

MATERIAL PROPERTIESAND ATTRIBUTES

AVAILABLE OPTIONS• Standard nameplate• Custom nameplate• Power EMS• Telephone EMS

Cover Weight: 96.7 lbs. (ea. half)

Coefficient of Friction (Dry)1.085 Per ASTM C1028

Compressive StrengthPolymer Concrete - 11,500 PSIPer ASTM D695

20

Page 21: Approved LockJaw Secured Enclosures · GROUND LUG (4-14 AWG GROUND WIRE) GROUND LUG DETAIL (1 PLACE EACH LOCKJAW) 11" X 18" X XX" (For actual dimensions see drawing) Polymer Concrete

1.251

2.817

R.219

.375

AA

CUSTOM LOGO

.230

R.016 R.031

R.016

R.031

.060

.060

.030

5.0°

.625

.626

15°

.030 .092

SECTION A-A

REVISIONSREV. DESCRIPTION DATE APPROVEDA.0 C.B.

A.0DO NOT SCALE DRAWING

9/12/2016

ABS

C.B.

UNLESS OTHERWISE SPECIFIED:

SCALE: 1:1 WEIGHT:

REVDWG. NO.

ASIZE

TITLE: LockJaw Keyhole Cover

NAME DATE

ENG APPR.

CHECKED

DRAWN

MATERIAL:

DIMENSIONS ARE IN INCHESTOLERANCES:MOLDED DIMENSIONS: 1/16"FABRICATED DIMENSIONS: 1/8"

PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFNEW BASIS. ANY REPRODUCTION INPART OR AS A WHOLE WITHOUT THEWRITTEN PERMISSION OF NEW BASISIS PROHIBITED.

5 4 3 2 1

SHEET 1 OF 1

2626 KANSAS AVE.RIVERSIDE, CA. 92507

(951) 787-0600

REF:

KEYHOLE COVER (LOCKJAW)

21