Application types for short hole drills
Transcript of Application types for short hole drills
ABCDEFGHIJKLMN
880/881/416.2/416.1 411.5 840/842/844/846/850/854/855/856880/416.20 411.5 840/842/846/850/854/855/856— 411.5 840/842/846/850416.20 — 854/855/856880/416.20 — 840/842/850416.20 — —416.20 — 840/850416.20 — 854/855/856880/416.20 — 840/842/850416.20 — —416.20 — —416.20 — —416.20 — 840/850416.20 — 854/855/856
CoroDrill 880/881 Coromant CoroDrill Coromant U/T-Max U Delta Delta-C
J K
M N
L
I
D E
G H
F
BA C
EN
G
Co
roP
ak 0
1:1
00.0
1.01
Rev
ised
09.
09.0
9
Even more possibilities thanks to tailored design!If you do not find what you need in our comprehensive standard programme, choose the tool shape you require and we will tailor it for you to your dimensions.
– Quick quotation – Easy to order – Competitive delivery
Special diameter and lengthWith one chamferFor drills with extended shankWith two chamfersWith one stepWith two stepsWith one step and one chamferWith one chamfer and one stepWith one stepWith two stepsWith two stepsWith two stepsWith one step and one chamferWith one chamfer and one step
Options Drill type
Application types for short hole drills
Dc mm
12.00-17.43 201), 25 .75, 1.0 .75, 1.0 20, 25 C33), C4, C5, C6 50, 63 50 63 17.44-20.99 202), 25, 32 .752), 1.0, 1.25 1.0, 1.25, 1.5 20, 25, 32 C33), C4, C5, C6 50, 63 50 63 21.00-25.99 25, 32 1.0, 1.25 1.25, 1.5 25, 32 C32), C4, C5, C6 50, 63 50 63 26.00-30.99 253), 32, 40 1.03), 1.25, 1.5 1.25, 1.5 253), 32, 40 C32), C43), C5, C6 50, 63 50 63 31.00-41.99 322), 40 1.252), 1.5 1.5, 2.0 322), 40 C42), C5, C6 50, 63 50 63 42.00-43.99 40, 50 1.5, 2,0 1.5, 2.0 40 C53), C6 63 - 63 44.00-63.504)5) 40, 50 1.5, 2,0 1.5, 2.0 40 C52), C6 63 - 63
880-01 Dc: 12.00 - 13.99 mm
{ Varilock
z Coromant Capto®
} HSKy Coromant Whistle Notch
880-02 Dc: 14.00 - 16.49 mm 880-03 Dc: 16.50 - 19.99 mm 880-04 Dc: 20.00 - 23.99 mm 880-05 Dc: 24.00 - 29.99 mm 880-06 Dc: 30.00 - 35.99 mm 880-07 Dc: 36.00 - 43.99 mm 880-08 Dc: 44.00 - 52.99 mm 880-09 Dc: 53.00 - 63.50 mm
Note For specific details regarding the options, contact your Sandvik Coromant sales representative.
Rotate Capto Yes or No coupling 180° Coupling M = Metric or U = Inch, only for cylindrical with flat unit and cylindrical
dmm/D5m Coupling size—see abovel1s Programming length—38.2-341.6 mm— depending on other parameters
l6 Flute length—32.9-277.4 mm, Recommended value must be used to obtain required l3s or l4
OptionsDc Diameter—12.00-63.50 mmDrill length l3s or l4 l3s Drill length—26.4-239.7 mm— depending on other parameters
l4 Drill depth—24-235.0 mm or 2 - 5 × Dc depending on other parameters
Coupling Cylindrical with flat, acc. to ISO 9766—CYLPFF, type Cylindrical same length as ISO 9766—CYLFA Short cylindrical with flat—CYLFB Coromant Whistle Notch—CWN Cylindrical with flat, US type—CYLUS Coromant Capto®—Capto Varilock—VL Compatible with ABS holders—ABS HSK coupling—HSK
Form
No.
C-1
150:
130-
EN
G
Fam
ily c
ode
= D
106
Co
roP
ak 0
5.2
05.0
8.20
R
evis
ed 0
9.02
.28
Even more possibilities thanks to tailored design!If you do not find what you need in our comprehensive standard programme, choose the tool shape you require and we will tailor it for you to your dimensions.
| Compatible with ABS holders
v Cylindrical (Same length as ISO 9766)
u Cylindrical with flat (acc. to ISO 9766)
– Quick quotation – Easy to order – Competitive delivery
Standard inserts:CoroDrill 880
1) Also as Short cylindrical with flat in drill diameter 12.00-17.43 mm2) Not available for >3xDc3) Not available for >4xDc4) 5xDc available for Dc < 47.00 mm 5) 4xDc available for Dc < 58.00 mm
Drill diameter Coupling type
Cylindrical Cylindrical Cylindrical Coromant Coromant Capto® Varilock Compatible HSK with flat and with flat and with flat Whistle with ABS Cylindrical Cylindrical US type Notch holders
Coupling Size dmm Coupling Size D5m
metric inch Inch metric
w Short cylindrical with flat (Only shank size 20)
x Cylindrical with flat (US type, inch)
14,00 17,43
Dc dmm D5m D5m
20 25
201) 25 32
dmm
.751) 1.0
.751) 1.0 1.25
C32) C4 C5 C6
C31) C4 C5 C6
50
50
63
63
D5m
.75 1.0
1.0 1.25 1.5
17,44 20,99
25 32
252) 32 40
1.0 1.25
1.02) 1.25 1.5
C31) C4 C5 C6
C31) C42)
C5 C6
50
50
63
63
1.25 1.5
1.25 1.5
21,00 25,99
26,00 30,99
20 25
20 25 32
25 32
252) 32 40
dmm
20
dmm
321) 40 1.251) 1.5 C41) C5 C6 50 631.5 2.031,00 41,99
321) 40
40 50 1.5 2.0 C51) C6 - 631.5 2.042,00 43,99
40
dmm
l3s=
l4=
Ð 880 - -
12.00 17.43
Dc dmm D5m D5m
20 25
202) 25 32
dmm
.75 1.0
.752) 1.0 1.25
C33) C4 C5 C6
C33) C4 C5 C6
50
50
63
63
D5m
.75 1.0
1.0 1.25 1.5
17.44 20.99
25 32 1.0 1.25 C32) C4 C5 C6
C32) C43)
C5 C6
50
50
63
63
1.25 1.521.00 25.99
26.00 30.99
20 25
20 25 32
25 32
dmm
20
dmm
322) 40 1.252) 1.5 322) 40
40 50 1.5 2.044.00 63.504)5)
40
dmm
253) 32 40
1.03) 1.25 1.5
31.00 41.99
253) 32 40
1.25 1.5
1.5 2.0
1.5 2.0
C42) C5 C6
50 63
40 50 1.5 2.0 4042.00 43.99
1.5 2.0 C53) C6 - 63
C52) C6 - 63
Dc=12-63.50
zCoromant Capto®
{VarilockFo
rm N
o. C
-115
0:13
0-E
NG
Fam
ily c
ode
= D
106
Co
roP
ak 0
5.2
05.0
8.29
R
evis
ed 0
9.02
.28
Customer Customer No. (Coromant internal) Date
Street
Post Code/City/State
Quantity
Telephone
Telefax
Customer attention
Issuer
CoroDrill 880Inquiry/ordering No.
Customer denomination
State nearest standard catalogue code, see main catalogue or supplement catalogue
Drill diameter Dc
Specify drill length l3sor drill depth l4Drill length l3s or Drill depth l4
Flute length l6
Coupling type and Coupling size dmm/D5m
l6 = 32.9-277.4 mm recommended value must be used to obtain required l3s or l4
l1s = 38.2-341.6 mm depending on the other parametersProgramming length l1s
Yes or NoRotate Coromant Capto coupling 180°
For cylindrical shank use cylindrical shank with flat
uCylindrical with flat (acc. to ISO 9766)
vCylidrical (same length as ISO 9766)
xCylindrical with flat US type, inch
|Compatible with ABS holders
Depending on the other parameters 2) not available for >3xDc 3) not available for >4xDc 4) 5xDc available for Dc < 47.00 mm 5) 4xDc available for Dc < 58.00 mm
Your value/ Your choice
M = metric or U = Inch Only for uCYLPFF and vCYLFACoupling unit
metric std
}HSK
l3s or l4Drill length l3s or l4
State only your options deviating from the above standard
The value/choice must be given
If no value/choice is specified, it will be recommended by the system
wShort cylindrical with flat (Only shank size 20)
yCoromant Whistle Notch®
zCAPTO {VL |ABS
{VL }HSK
uCYLPFF vCYLFA
metric
uCYLPFF vCYLFA
inch
xCYLUS inch
yCWN metric
wCYLFB metric
Drill depth l4= 24-235.0 mm or 2 - 5 × Dc, depending on the other parameters
Drill length l3s=26.4-239.7 mm, depending on the other parameters
Dc2 mm
20.45-30.99 201), 25, 32, 40 .75, 1.0, 1.25, 1.5 .75, 1.0, 1.25, 1.5 20, 25, 32, 40 C3, C4, C5, C6 50, 63 50 63 31.00-41.99 25, 32, 40, 50 1.0, 1.25, 1.5, 2.0 1.5, 2.0 25, 32, 40 C4, C5, C6 50, 63 50 63 42.00-58.49 32, 40, 50 1.25, 1.5, 2.0 1.5, 2.0 32, 40 C5, C6 63 - 63 58.50-63.50 40, 50 1.5, 2.0 - - - - - - 63.51-85.00 40, 50 1.5, 2.0 - - - - - -
880-01 Dc1: 12.00 - 13.99 mm
880-02 Dc1: 14.00 - 16.49 mm 880-03 Dc1: 16.50 - 19.99 mm 880-04 Dc1: 20.00 - 23.99 mm 880-05 Dc1: 24.00 - 29.99 mm 880-06 Dc1: 30.00 - 35.99 mm 880-07 Dc1: 36.00 - 43.99 mm 880-08 Dc1: 44.00 - 52.99 mm 880-09 Dc1: 53.00 - 63.50 mm
S1
C1
z Coromant Capto®
{ Varilock
} HSKy Coromant Whistle Notch
Note For specific details regarding the options, contact your Sandvik Coromant sales representative.
Coupling Coupling type—see above typedmm/D5m Coupling size—see above Rotate Capto Yes or No coupling 180° Coupling M = Metric or U = Inch, only for unit cylindrical with flat and cylindrical
l1s Programming length—40.1-361.5 mm l3s Reach length—18.5-255.0 mm
OptionsDc1 1 extra insert; Drill diameter—12.00-63.50 mmDrill Chamfer = C1, Step/boring = S1 alternative kr1 Chamfer angle 1 = 15º-90ºch1 Chamfer width 1 = 0.03-9.74 mm
lch1 Length chamfer lch1 = 12.3-190.5 mm
Dc2 Step/boring diameter 19-85 mm
l21 Length to step/boring 12-190.5 mm
Supporting Yes or No step insert
Form
No.
C-1
150:
132-
EN
G
Fam
ily c
ode
= D
110
Co
roP
ak 0
8.2
08.0
8.04
R
evis
ed 0
9.02
.28
Even more possibilities thanks to tailored design!If you do not find what you need in our comprehensive standard programme, choose the tool shape you require and we will tailor it for you to your dimensions.
| Compatible with ABS holders
v Cylindrical (Same length as ISO 9766)
u Cylindrical with flat (acc. to ISO 9766)
– Quick quotation – Easy to order – Competitive delivery
Standard inserts:CoroDrill 880, Step and chamfer
1) Also as Short cylindrical with flat in diameter Dc2 20.45-30.99 mm
Diameter Coupling type
Cylindrical Cylindrical Cylindrical Coromant Coromant Capto® Varilock Compatible HSK with flat and with flat and with flat Whistle with ABS Cylindrical Cylindrical US type Notch holders
Coupling Size dmm Coupling Size D5m
metric inch Inch metric
w Short cylindrical with flat (Only shank size 20)
x Cylindrical with flat (US type, inch)
Chamfer with 1 standard insert
Step/boring with 1 insert
Chamfer (C1)
Step 90° (S1)
Step < 90° (S1)
Dc2 = 19-85.0
l21 = 12-190.5
lch1 = 12.3-190.5
l1s = 40.1-361.5
Ð
ch1 = 0.03-9.74
kr1 = 15° - 90°
l3s = 18.5-255.0
20.45 30.99
Dc2 dmm D5m D5m
20 25 32 40
25 32 40 50
dmm
.75 1.0 1.25 1.5
1.0 1.25 1.5 2.0
C3 C4 C5 C6
C4 C5 C6
50
50
63
63
D5m
.75 1.0 1.25 1.5
1.5 2.031.00 41.99
32 40 50
1.25 1.5 2.0 C5 C6 631.5 2.0
42.00 58.49
58.50 63.50
20 25 32 40
20 25 32
32 40
dmm
20
dmm
40 50 1.5 2.0
dmm
40 50 1.5 2.0
63.51 85.00
D5m
50 63
50 63
63
CoroDrill 880, Step and chamfer
Customer Customer No. (Coromant internal) Date
Street
Post Code/City/State
Quantity
Telephone
Telefax
Customer attention
Issuer
Inquiry/ordering No.
Customer denomination
State only your options
1 extra insert; Dc1 = 12.00-63,5
Chamfer width ch1
Cutting edge angle kr1
Drill alternative C1 = Chamfer S1 = Step/boring
Drill diameter Dc1
Length to insert l21
Step/Boring diameter Dc2
Length to insert lch1
Form
No.
C-1
150:
132-
EN
G
Fam
ily c
ode
= D
110
Co
roP
ak 0
8.2
08.0
8.04
R
evis
ed 0
9.02
.28
The value/choice must be given
If no value/choice is specified, it will be recommended by the system
Programming length l1s
Rotate Coromant Capto coupling 180°Coupling unit
Yes or No
M=metric or U=inch Only for uCYLPFF and vCYLFA
Your value/ Your choice
zCoromant Capto®
{Varilock
Coupling type and Coupling size dmm/D5m
uCylindrical with flat (acc. to ISO 9766)
vCylidrical (same length as ISO 9766)
xCylindrical with flat US type, inch
|Compatible with ABS holders
Depending on the other parameters
}HSK
wShort cylindrical with flat (Only shank size 20)
yCoromant Whistle Notch®
zCAPTO |ABS }HSKuCYLPFF vCYLFA
metric
uCYLPFF vCYLFA
inch
xCYLUS inch
yCWN metric
wCYLFB metric
Reach length l3s
Yes or NoSupporting step insert
{VL
881 02, Dc = 12,70-17,43881 03, Dc = 17,44-20,99881 04, Dc = 21,00-25,99
881
x Coromant Whistle Notch y Coromant Capto®
Dc mm
12,70-17,43 20 1), 25, 32 .750, 1.000, 1.250 20, 25, 32 C3, C4, C5, C6 50 17,44-20,99 20, 25, 32 .750, 1.000, 1.250 20, 25, 32 C3, C4, C5, C6 50 21,00-25,99 25, 32 1.000, 1.250 25, 32 C3, C4, C5, C6 50
Form
No.
C-1
150:
138-
EN
G
Fam
ily c
ode
= D
112
Co
roP
ak 1
1.1
10.1
0.01
Even more possibilities thanks to tailored design!If you do not find what you need in our comprehensive standard programme, choose the tool shape you require and we will tailor it for you to your dimensions.
– Quick quotation – Easy to order – Competitive delivery
Standard inserts:
v Cylindrical (Same length as ISO 9766)
z Compatible with ABS holders
u Cylindrical with flat (acc. to ISO 9766)
w Short cylindrical with flat (Only shank size 20)
OptionsDc Diameter—12,70-25,99 mml3s Drill length—28,0-134,6 mm— depending on other parameters
l4 Drill depth— Dc—12,70-25,99—2 × Dc - 5 × Dc
Mounting Cylindrical with flat, acc. to ISO 9766—CYLPFF type Cylindrical same length as ISO 9766—CYLFA Short cylindrical with flat—CYLFB Coromant Whistle Notch—CWN Coromant Capto®—Capto Compatible with ABS holders—ABS
Rotate Capto Yes or No coupling 180° Mounting M = Metric or U = Inch, only for cylindrical with flat unit dmm/D5m Mounting size—see abovech Taper length— Dc—12,70-25,99—0,5 × Dc - 1 × Dc
Recommended value 0,6 × Dc
l1s Programming length—39,8-207,3 mm depending on other parameters
l6 Flute length—34,2-160,5 mm, Recommended value must be used to obtain required l3s or l4
Note For specific details regarding the options, contact your Sandvik Coromant sales representative.
1 Also as Short cylindrical with flat in drill diameter 12,70-17,43 mm
Drill diameter
Mounting type
Cylindrical Cylindrical Coromant Coromant Capto® Compatible with flat and with flat Whistle Notch with Cylindrical ABS holders
Mounting Size dmm Mounting Size D5m
metric inch metric
CoroDrill 881
881- -
l3s=
l4=
ÐDc=12,70-25,99
x Coromant Whistle Notch
y Coromant Capto®
12.70 17.43
17.44 20.99
21.00 25.99
yCAPTO zABS
Dc dmm D5m D5m
20 25 32 20
20 25 32
25 32
750 1.000 1.250
.750 1.000 1.250
1.000 1.250
20 25 32
20 25 32
25 32
C3 C4 C5 C6
C3 C4 C5 C6
C3 C4 C5 C6
50
50
50
dmm dmm dmm
Form
No.
C-1
150:
138-
EN
G
Fam
ily c
ode
= D
112
Co
roP
ak 1
1.1
10.1
0.01
The value/choice must be given
If no value/choice is specified, it will be recommended by the system
Customer Customer No. (Coromant internal) Date
Street
Post Code/City/State
Quantity
Telephone
Telefax
Customer attention
Issuer
CoroDrill 881Inquiry/ordering No.
Customer denomination
State nearest standard catalogue code, see main catalogue or supplement catalogue
metric std
Drill diameter Dc
State only your options deviating from the above standard
Specify drill length l3s or drill depth l4Drill length l3s or Drill depth l4
Flute length l6
Mounting type and Mounting size dmm/D5m
l6 = 34,2-160,5 mm recommended value must be used to obtain required l3s or l4
l1s = 39,8-207,3 mm depending on the other parametersProgramming length l1s
Yes or NoRotate Coromant Capto coupling 180°
Taper length ch
For cylindrical and Short cylindrical shank use cylindrical shank with flat
Drill length l3s=28,0-134,6, depending on the other parameters
Drill depth: Dc=12,70-25,99 -> l4=2×Dc-5×Dc
Note! The value must always be given if l4 is choosen
Taper length: Dc=12,70-25,99 -> ch=0,5×Dc-1,0×Dc recommended value 0,6×Dc
u Cylindrical with flat (acc. to ISO 9766)
v Cylindrical (same length as ISO 9766)
w Short cylindrical with flat
z Compatible with ABS holders
Depending on the other parameters
Your value/ Your choice
M = metric or U = Inch Only for uCYLPFF Mounting unit
uCYLPFF v CYLFA
mm
u CYLPFF inch
w CYLFB mm
x CWN mm
LCMX 02, Dc = 12,70-17,43LCMX 03, Dc = 17,44-20,99LCMX 04, Dc = 21,00-25,99WCMX 05, Dc = 26,00-30,99WCMX 06, Dc = 31,00-41,99WCMX 08, Dc = 42,00-58,99
LCMX WCMX
x Coromant Whistle Notch
y Coromant Capto®
z Varilock
Dc mm
12,70-17,43 16, 20 1), 25, 32 .625, .750, 1.000, 1.250 16, 20, 25, 32 C3, C4, C5, C6 50, 63 50 17,44-20,99 20, 25, 32 .750, 1.000, 1.250 20, 25, 32 C3, C4, C5, C6 50, 63 50 21,00-25,99 25, 32 1.000, 1.250 25, 32 C4, C5, C6 50, 63 50 26,00-30,99 32, 40 1.250, 1.500 25, 32, 40 C4, C5, C6 50, 63 50 31,00-41,99 40 1.500 32, 40 C5, C6 50, 63 50 42,00-58,99 40, 50 1.500, 2.000 40 C6 63 -
Form
No.
C-1
150:
112-
EN
G
Fam
ily c
ode
= D
102
Co
roP
ak 9
4.1
93.1
0.01
R
evis
ed 0
9.02
.28
Even more possibilities thanks to tailored design!If you do not find what you need in our comprehensive standard programme, choose the tool shape you require and we will tailor it for you to your dimensions.
– Quick quotation – Easy to order – Competitive delivery
Standard inserts:
v Cylindrical (Same length as ISO 9766)
{ Compatible with ABS holders
u Cylindrical with flat (acc. to ISO 9766)
w Short cylindrical with flat (Only shank size 20)
OptionsDc Diameter—12,70-58,99 mml3s Drill length—28,0-239,7 mm— depending on other parameters
l4 Drill depth— Dc—12,70-47,00—2 × Dc - 5 × Dc Dc—47,01-58,99—Max 235 mm
Mounting Cylindrical with flat, acc. to ISO 9766—CYLPFF, type Cylindrical same length as ISO 9766—CYLFA Short cylindrical with flat—CYLFB Coromant Whistle Notch—CWN Coromant Capto®—Capto Varilock—VL Compatible with ABS holders—ABS
Rotate Capto Yes or No coupling 180° Mounting M = Metric or U = Inch, only for cylindrical with flat unit dmm/D5m Mounting size—see abovech Taper length— Dc—12,70-45,40—0,5 × Dc - 1 × Dc
Dc—45,41-58,99—Max 37,4 mm— Recommened value 0,6 × Dc
l1s Programming length—38,9-346,6 mm— depending on other parameters
l6 Flute length—34,2-277,1 mm, Recommended value must be used to obtain required l3s or l4
Note For specific details regarding the options, contact your Sandvik Coromant sales representative.
1 Also as Short cylindrical with flat in drill diameter 12,70-17,43 mm
Drill diameter
Mounting type
Cylindrical Cylindrical Coromant Coromant Capto® Varilock Compatible with flat and with flat Whistle Notch with Cylindrical ABS holders
Mounting Size dmm Mounting Size D5m
metric inch metric
Coromant U drill R416.2
R416.2- -
l3s=
l4=
ÐDc=12,70-58,99
x Coromant Whistle Notch
y Coromant Capto®
z Varilock
12.70 17.43
17.44 20.99
21.00 25.99
26.00 30.99
31.00 41.99
42.00 58.99
yCAPTO zVL {ABS
Dc dmm D5m D5m D5m
16 20 25 32 20
20 25 32
25 32
32 40
40
40 50
.625 .750 1.000 1.250
.750 1.000 1.250
1.000 1.250
1.250 1.500
1.500
1.500 2.000
16 20 25 32
20 25 32
25 32
25 32 40
32 40
40
C3 C4 C5 C6
C3 C4 C5 C6
C4 C5 C6
C4 C5 C6
C5 C6
C6
50 63
50 63
50 63
50 63
50 63
63
50
50
50
50
50
dmm dmm dmm
Form
No.
C-1
150:
112-
EN
G
Fam
ily c
ode
= D
102
Co
roP
ak 9
4.1
93.1
0.01
R
evis
ed 0
9.02
.28
The value/choice must be given
If no value/choice is specified, it will be recommended by the system
Customer Customer No. (Coromant internal) Date
Street
Post Code/City/State
Quantity
Telephone
Telefax
Customer attention
Issuer
Coromant U drillR416.2
Inquiry/ordering No.
Customer denomination
State nearest standard catalogue code, see main catalogue or supplement catalogue
metric std
Drill diameter Dc
State only your options deviating from the above standard
Specify drill length l3s or drill depth l4Drill length l3s or Drill depth l4
Flute length l6
Mounting type and Mounting size dmm/D5m
l6 = 34,2-277,1 mm recommended value must be used to obtain required l3s or l4
l1s = 39,8-346,6 mm depending on the other parametersProgramming length l1s
Yes or NoRotate Coromant Capto coupling 180°
Taper length ch
For cylindrical and Short cylindrical shank use cylindrical shank with flat
Drill length l3s=28,0-239,7, depending on the other parameters
Drill depth: Dc=12,70-47,00 -> l4=2×Dc-5×Dc
Drill depth: Dc=47,01-58,99 -> l4=max 235 mm
Note! The value must always be given if l4 is choosen
Taper length: Dc=12,70-45,40 -> ch=0,5×Dc-1,0×Dc recommended value 0,6×Dc
Taper length: Dc=45,41-58,99 -> ch=max 37,4 mm
u Cylindrical with flat (acc. to ISO 9766)
v Cylidrical (same length as ISO 9766)
w Short cylindrical with flat
{ Compatible with ABS holders Depending on the other parameters
Your value/ Your choice
M = metric or U = Inch Only for uCYLPFF Mounting unit
uCYLPFF v CYLFA
mm
u CYLPFF inch
w CYLFB mm
x CWN mm
8 9
11 1210
7
2 3
5 64
1
B1B1/B2 B1/B2
B1/C2 C1/B2B1/B2
C1C1/C2
B1
B1/C2 C1/B2B1/B2
Form
No.
C-1
150:
120-
EN
G
Fam
ily c
ode
= D
105
Co
roP
ak 0
1.1
01.0
1.01
R
evis
ed 0
9.02
.28
Even more possibilities thanks to tailored design!If you do not find what you need in our comprehensive standard programme, choose the tool shape you require and we will tailor it for you to your dimensions.
– Quick quotation – Easy to order – Competitive delivery
Coromant U drill, Step and chamfer
Note For specific details regarding the options, contact your Sandvik Coromant sales representative.Options
Type TM 416.20
Type S 416.20 with stepboring insert at entering angle less than 90°
No of extra inserts
Chamfer angle 2 = 15º-90ºChamfer width 2 = 0,03-11,23 mmLength chamfer lch2 = 12,3-171,0 mmStep/boring diameter 21,4-58,90 mmLength to step/boring 12,8-171,0 mmReach length 17,5-176,7 mmCoupling type—see page 3
Yes or No
Coupling size—see page 3M=metric or U=inchProgramming length 35,3-307,4 mm
1 or 2
1 extra insert; Drill diameter—12,7-57,00 mm 2 extra inserts; Drill diameter—12,7-55,10 mmStep/boring = B1, Chamfer = C1 Chamfer angle 1 = 15º-90ºChamfer width 1 = 0,03-11,23 mmLength chamfer lch1 = 12,3-171,0 mmStep/boring diameter 18,43-58,90 mmLength to step/boring 12-171,0 mmYes or No, only for drill type 3, 7 and opposite to step/boring insert B1Step/boring = B2, Chamfer = C2
Coupling typeRotate Capto coupling 180°
Coupling unitSupporting insert
Drill alternative
Drill alternative
kr2
ch2
lch2
Dc3
l22
l3s
dmm/D5m
l1s
Dc1
kr1 ch1 lch1 Dc2 l21
9
11
7
5
3
1
4
12
8
10
2
6
lch1 = 2,3 × Dc1 lch1 = 2,3 × Dc1
l21 = 1,5 × Dc1
l3s = 1,5 × Dc2
l21 = 1,5 × Dc1
lch2 = 1,5 × Dc2
lch1 = 2,3 × Dc1
l3s = 1,5 × Dc3
l21 = 1,5 × Dc1
l22 = 1,5 × Dc2
l3s = 1,5 × Dc3
l21 = 3,0 × Dc1
l3s = 3,0 × Dc2
l21 = 3,0 × Dc1
l22 = 3,0 × Dc2
l21 = 3,0 × Dc1
lch2 = 3,0 × Dc2
lch1 = 3,0 × Dc1
l3s = 3,0 × Dc3
l21 = 3,0 × Dc1
l22 = 3,0 × Dc2
l3s = 3,0 × Dc3
l21 = 3,0 × Dc1
l22 = 3,0 × Dc2
l3s = 3,0 × Dc3
l3s = 3,0 × Dc3
Continued
Type S 416.20
Type TM 416.20
Form
No.
C-1
150:
120-
EN
G
Fam
ily c
ode
= D
105
Co
roP
ak 0
1.1
01.0
1.01
R
evis
ed 0
9.02
.28
Dc2/Dc3 D5m D5m
12,70-17,43 C3 C4 C5 C6 50 63 17,44-20,99 C3 C4 C5 C6 50 63 21,00-25,99 C3 C4 C5 C6 50 63 26,00-30,99 C3 C4 C5 C6 50 63 31,00-41,99 C4 C5 C6 50 63 42,00-58,90 C5 C6 63
TCMT 06 TCMT 09 TCMT 11 TCMT 16
u v w x
y z Coromant Capto®
Dc1
LCMX 02 12,70-17,43 LCMX 03 17,44-20,99 LCMX 04 21,00-25,99 WCMX 05 26,00-30,99 WCMX 06 31,00-41,99 WCMX 08 42,00-57,00
CoroTurn 107
Varilock
TCMT 06 TCMT 09 TCMT 11 TCMT 16
Dc2/Dc3 dmm dmm dmm dmm dmm
12,70-17,43 20 25 32 40 0,75 1,0 1,25 1,5 20 20 25 32 40 20 25 32 40 17,44-20,99 20 25 32 40 0,75 1,0 1,25 1,5 20 20 25 32 40 20 25 32 40 21,00-25,99 20 25 32 40 0,75 1,0 1,25 1,5 20 20 25 32 40 20 25 32 40 26,00-30,99 20 25 32 40 0,75 1,0 1,25 1,5 20 20 25 32 40 20 25 32 40 31,00-41,99 25 32 40 50 1,0 1,25 1,5 2,0 - 25 32 40 50 25 32 40 42,00-58,90 32 40 50 1,25 1,5 2,0 - 32 40 50 32 40
{ | ABS KM Dc2/Dc3 D5M D5M
12,70-30,99 50 40 50 31,00-41,99 50 - 42,00-58,90 - -
|
z
u v w x
B1
B2
C2C1
{
y
Cutting diameter Cylindrical Short cylindrical Cylindrical Whistle Notch with flat with flat
Coromant shanks
Shanks compatible with other holders
InsertsChamfer with 1 or 2 insert Step/boring with 1 insert
Step/boring with 2 inserts
Chamfer or step/boringinserts
Selected of the programme
Continued
Form
No.
C-1
150:
120-
EN
G
Fam
ily c
ode
= D
105
Co
roP
ak 0
1.1
01.0
1.01
R
evis
ed 0
9.02
.28
Cuttingdiameter
Cutting diameter
( metric ) ( inch )
Dc2 = 18,43-58,90
Dc3 = 21,4-58,9
l22 = 12,8-171,0
l3s = 17,5-176,7
l21 = 12-171,0
ch2 = 0,03-11,23
lch2 = 12,3-171,0
kr2 = 15° - 90°
lch1 = 12,3-171,0
l1s = 35,3-307,4
12,70-58,90 16 20 25 C3 C4 C5 C6 50 63 50 40 50 32 40 50 0,75 1,0 1,25 1,5 2,0
y CAPTO z VL { ABS
uCYLPFF vCYLFB wCYLFA xCWN
Dc1 dmm D5m D5m D5m
| KM
D5m
Ð
ch1 = 0,03-11,23
kr1 = 15° - 90°
Coromant U drill, Step and chamfer
Customer Customer No. (Coromant internal) Date
Street
Post Code/City/State
Quantity
Telephone
Telefax
Customer attention
Issuer
Inquiry/ordering No.
Customer denomination
State only your options
1 extra insert; Dc1 = 12,7-57,0 2 extra insert Dc1 = 12,7-55,1
Chamfer width ch1
Cutting edge angle kr1
Drill alternative B1 = Step/boring C1 = Chamfer
Drill diameter Dc1
No of extra insert
No of extra insert = 1 or 2
Step/Boring diameter Dc3
Reach length l3s
Length to insert l22
Drill alternative B2 = Step/boring C2 = Chamfer (only for 2 extra inserts)
Length to insert l21
Length to insert lch2
Chamfer width ch2
Step/Boring diameter Dc2
Cutting edge angle kr2
Length to insert lch1
Yes or No, only for drill type 3, 7 and opposite to step/boring insert B1
Supporting insert
Form
No.
C-1
150:
120-
EN
G
Fam
ily c
ode
= D
105
Co
roP
ak 0
1.1
01.0
1.01
R
evis
ed 0
9.02
.28
The value/choice must be given
If no value/choice is specified, it will be recommended by the system
Coupling type and Coupling size dmm/D5m
Compatible holders
u/v/w Cylindrical holders
x Coromant Whistle Notchy Coromant Capto®
z Varilock{/| Compatible holders
Type =
Size =
Programming length l1s
Rotate Coromant Capto coupling 180°Coupling unit
Yes or No
M=metric or U=inch Only for uCYLPFF
Your value/ Your choice
17,50-20,99 16, 20, 25, 32, 40 50, 63 21,00-30,99 20, 25, 32, 40 50, 63 31,00-41,99 25, 32, 40 63 42,00-60,00 40 63
Coromant Whistle Notch
Dc dmm D5m
Coromant Whistle Notch Varilock
LCMX 03, Dc = 17,50-20,99
LCMX 04, Dc = 21,00-25,99
WCMX 05, Dc = 26,00-30,99
WCMX 06, Dc = 31,00-41,99
WCMX 08, Dc = 42,00-60,00
Standard inserts:
Form
No.
C-1
150:
113-
EN
G
Fam
ily c
ode
= D
100
Co
roP
ak 9
2.2
92.1
0.01
R
evis
ed 0
9.02
.28
Options Note For specific details regarding the options, contact your Sandvik Coromant sales representative.
Drill type 2.1 2.2 Diameter Dc 17,5-60,0 mm
Coolant Internal or ExternalDrill length l3s Drill type 2.1 2.2—Min 1,2-1,9-×‑Dc — Max 4-×‑Dc
Drill length l4 Drill type 2.1—3,2-×‑Dc Drill type 2.2—3,8-×‑Dc
Design 2.1 2.2—Right hand or Left handMounting type Coromant Whistle Notch—CWN, Varilock—VLdmm/D5m Mounting size—see aboveProgramming length-l1s 2.1 2.2—depending on l3s, l4
Even more possibilities thanks to tailored design!If you do not find what you need in our comprehensive standard programme, choose the tool shape you require and we will tailor it for you to your dimensions.
– Quick quotation – Easy to order – Competitive delivery
T-Max U drill R/L416.1
Type 2.2 Drills without chamfer insert
Type 2.1 Drills without chamfer insert
Coromant Whistle Notch and Varilock
Drill diameter, mm
Mounting size Mounting size
Mounting type
L416.1- --
Dc=17,5-60,0
v VL
17,50-20,99
21,00-30,99
31,00-41,99
42,00-60,00
u CWNDc dmm D5m
16 20 25 32 40
20 25 32 40
25 32 40
40
50 63
50 63
63
63
Ð
u Coromant Whistle Notch
v Varilock
Type of design 2.1/2.2
Design Right or left hand
Type of design 2.1 2.2
Drill depth l4 Max=3,2×Dc Max=3,8×Dc
Type of design 2.1/2.2
Drill length l3s Min=1,2-1,9×Dc, Max=4×Dc Depending on other parameters
Form
No.
C-1
150:
113-
EN
G
Fam
ily c
ode
=D
100
Co
roP
ak 9
2.2
92.1
0.01
R
evis
ed 0
9.02
.28
The value/choice must be given
If no value/choice is specified, it will be recommended by the system
Customer Customer No. (Coromant internal) Date
Street
Post Code/City/State
Quantity
Telephone
Telefax
Customer attention
Issuer
T-Max U drill R/L 416.1Inquiry/ordering No.
Customer denomination
State nearest standard catalogue code, see main catalogue or supplement catalogue
metric std
Type of design Without chamfering insert=2.1 and 2.2
Diameter Dc
Coolant Internal or External
Drill length l3s
Drill depth l4
State only your options deviating from the above standard
Mounting type and Mounting size dmm/D5m
Programming length l1s
Design
Type of design 2.1/2.2
Progr. length l1s Depending on l3s and l4
Your value/ Your choice