4.58 hrs

2 pcs

f

0.15 mm

k

0.40 mm

h

1

35.00 g

d

MK2/S

Summary

This is a stand for the Apple TV remote. There is a version with or withoutthe apple logo.There is also a hollow version that will require support and the logo insertthat could be done in an alternate colour, like black with a silver base.

For the hollow version with an insert I added the gcode for Prusa Mk2.Resolution is 0.15, the print needs to be precise for a good fit. With thisgcode it was an easy, light press fit with next to no cleanup.

A360 downloadable files...https://a360.co/2TH5dx6

Gadgets > Computers

stand remote mac appletv apple

Category: Computer

G GerryPB

Apple TV remoteholder

VIEW IN BROWSER

updated 29. 12. 2019 | published 29. 12. 2019

Print Files (.gcode) DOWNLOAD ALL FILES

179.0 KB

0.14 hrs f 0.15 mm k 0.40 mm h PLA 1.10 g d MK2/S

updated 29. 12. 2019

4.3 MB

4.44 hrs f 0.15 mm k 0.40 mm h PLA 33.40 g d MK2/S

updated 29. 12. 2019

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

19.9 KBupdated 29. 12. 2019

47.6 KBupdated 29. 12. 2019

4.0 MBupdated 29. 12. 2019

60.8 KBupdated 29. 12. 2019

Find source .stl files on Thingiverse.com

License

This work is licensed under a Creative Commons (4.0 International License)

apple_remote_stand_logo_insert_015mm_pla_mk2s.gcode

apple_remote_stand_hollow_015mm_pla_mk2s.gcode

apple_remote_stand.stl

apple_remote_stand_with_logo.stl

apple_remote_stand_logo_insert.stl

apple_remote_stand_hollow.stl

Attribution

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition