APE Model D30-42 Single Acting Diesel Impact Hammer · APE Model D30-42 Single Acting Diesel Impact...

A M E R I C A N P I L E D R I V I N G E Q U I P M E N T , I N C . 7032 South 196th Kent, Washington 98032 USA (800) 248-8498 & (253) 872-0141 (253) 872-8710 Fax Visit our WEB site: www.apevibro.com e-mail: [email protected] APE Model D30-42 Single Acting Diesel Impact Hammer MODEL D30-42 (3.0 metric ton ram) SPECIFICATIONS Stroke at maximum rated energy 135 in (343 cm) Maximum rated energy (Setting 4) 74,419 ft-lbs (100.47 kNm) Setting 3 66,977 ft-lbs (90.42 kNm) Setting 2 55,070 ft-lbs (74.34 kNm) Minimum rated energy (Setting 1) 37,209 ft-lbs (50.23 kNm) (V Maximum obtainable stroke Maximum obtainable energy 150 in (381 cm) 86,546 ft-lbs (117 kNm) Speed (blows per minute) 34-53 6,615 lbs (3,000 kg) 1,358 lbs (616 kg) 367.94 in² (2373.80 cm²) 13,571 lbs (6,154 kg) 16,223 lbs (7,357 kg) 17.4 gal (65 liters) 5 gal (19 liters) CONSUMPTION Diesel or Bio-diesel fuel Lubrication Grease 2.6 gal/hr (9.84 liters/hr) 0.26 gal/hr (1 liters/hr) 8 to 10 pumps every 20 minutes of operation time. STRIKER PLATE FOR DB 26 Weight 628 lbs (284 kg) Diameter 22.5 in (57.15 cm) Area 398 in² (2567.74 cm²) Thickness 6 in (15.24 cm) CUSHION MATERIAL Type/Qty Micarta / 2 each Diameter-DB26 22.5 in (57.15 cm) Thickness 1 in (25.4 mm) Type/Qty Aluminum / 3 each Thickness 1/2 in (12.7 mm) Diameter 22.5 in (57.15 cm) Total Combined Thickness 3.5 in (8.89 cm) Area 398 in² (2567.74 cm²) Elastic-modulus 285 ksi (1,965 mpa) Coeff. of restitution 0.8 DRIVE CAP DB 26: 1,076 lbs (488 kg) INSERT WEIGHT H-Beam insert for 12” (305 mm) and 14” (355 mm): 948 lbs (430 kg) Large pipe insert for sizes 12” to 24” diameter: 1,830 lbs (830 kg) MINIMUM BOX LEAD SIZE/OPERATING LENGTH Minimum box leader size 8 in x 26 in (20.32 cm x 66 cm) Operating length as described above 354 in (900 cm) Optional Variable Throttle Control. Drive Base Assembly. D30-42 Finishing Dolphin Piles. WEIGHTS (Approximate) Piston Anvil Anvil cross sectional area Hammer weight (includes trip device) Typical operating (weight with DB26 and H-beam insert) CAPACITIES Fuel tank (runs on diesel or bio-diesel) Oil tank

Upload
hoangdiep
Category

Documents
view
237
download
1

Embed Size (px):

Transcript of APE Model D30-42 Single Acting Diesel Impact Hammer · APE Model D30-42 Single Acting Diesel Impact...

Page 1: APE Model D30-42 Single Acting Diesel Impact Hammer · APE Model D30-42 Single Acting Diesel Impact Hammer MODEL D30-42 (3.0 metric ton ram) ... D30-42 Finishing Dolphin Piles. WEIGHTS

AMERICA

N P

ILEDRIVING EQUIPM

ENT, INC.

7032 South 196thKent, Washington 98032 USA(800) 248-8498 & (253) 872-0141(253) 872-8710 Fax

Visit our WEB site:www.apevibro.com

e-mail: [email protected]

APE Model D30-42 Single Acting Diesel Impact Hammer

MODEL D30-42 (3.0 metric ton ram)SPECIFICATIONS Stroke at maximum rated energy 135 in (343 cm)Maximum rated energy (Setting 4) 74,419 ft-lbs (100.47 kNm)Setting 3 66,977 ft-lbs (90.42 kNm)Setting 2 55,070 ft-lbs (74.34 kNm)Minimum rated energy (Setting 1) 37,209 ft-lbs (50.23 kNm)(V

Maximum obtainable stroke Maximum obtainable energy

150 in (381 cm) 86,546 ft-lbs (117 kNm)

Speed (blows per minute) 34-53

6,615 lbs (3,000 kg)1,358 lbs (616 kg)

367.94 in² (2373.80 cm²)13,571 lbs (6,154 kg)

16,223 lbs (7,357 kg)

17.4 gal (65 liters)5 gal (19 liters)

CONSUMPTION Diesel or Bio-diesel fuel Lubrication Grease

2.6 gal/hr (9.84 liters/hr)0.26 gal/hr (1 liters/hr)

8 to 10 pumps every 20 minutes of operation time.

STRIKER PLATE FOR DB 26 Weight 628 lbs (284 kg)Diameter 22.5 in (57.15 cm)Area 398 in² (2567.74 cm²)Thickness 6 in (15.24 cm)

CUSHION MATERIAL Type/Qty Micarta / 2 each Diameter-DB26 22.5 in (57.15 cm)Thickness 1 in (25.4 mm)

Type/Qty Aluminum / 3 each Thickness 1/2 in (12.7 mm)Diameter 22.5 in (57.15 cm)Total Combined Thickness 3.5 in (8.89 cm)Area 398 in² (2567.74 cm²)Elastic-modulus 285 ksi (1,965 mpa)Coeff. of restitution 0.8

DRIVE CAP DB 26: 1,076 lbs (488 kg)

INSERT WEIGHTH-Beam insert for 12” (305 mm) and 14” (355 mm): 948 lbs (430 kg) Large pipe insert for sizes 12” to 24” diameter: 1,830 lbs (830 kg)

MINIMUM BOX LEAD SIZE/OPERATING LENGTHMinimum box leader size 8 in x 26 in (20.32 cm x 66 cm)Operating length as described above 354 in (900 cm)

Optional Variable Throttle Control.

Drive Base Assembly.

D30-42 Finishing Dolphin Piles.

WEIGHTS (Approximate)PistonAnvilAnvil cross sectional areaHammer weight (includes trip device)Typical operating (weight with DB26 and H-beam insert)

CAPACITIESFuel tank (runs on diesel or bio-diesel)Oil tank