aoDD pumps · 2021. 6. 17. · Nylon -17.8° C to93.3° C 1-28.9° C to 148.9° C Ultrapure II and...
Transcript of aoDD pumps · 2021. 6. 17. · Nylon -17.8° C to93.3° C 1-28.9° C to 148.9° C Ultrapure II and...
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
1AO
DD P
UMPS
Air operated diaphragm pumps are a type of reciprocating diaphragm pump which contains two (2) diaphragms and is powered/ driven by compressed air.
Air operated diaphragm pumps are used in endless applications in mining, industrial and general plant service in any of the following applications:
1. Chemical transfer.2. De-watering underground mines particularly coal mines.3. Food/ Pharmaceutical manufacturing.4. Where the liquid being pumped has a high solids content or high viscosity.5. Where electricity isn't available or in explosive/ flammable environments.
Some of the myriad features and benefits exhibited by AODD pumps include:
Description
Features & BeneFits
typical applications &operation principle
tecHnical Data
aoDD pumps
• Can run dry indefinitely without damage
• Can be dead-headed without damage
• Low shear pumping action.
• Self-compensating design limits damage caused by misuse.
• No mechanical seal minimising damage leakage points.
• Rapid self-priming up to 7m.
• Variable speed.
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
22
Self-Priming• Portable
• High vacuum
• Run-dry capable
• No heat generation
Positive Suction Head• Preferred installation for high viscosity applications
• Flow-through capability
• Inlet pressure should be limited to 0.7 bar (10 psig) to maximise parts life
Submerged• Air-operated pumps (nonelectrical)
• Submersible option required
• Single-point exhaust options available
• Multiple material options available for process fluid compatibility
A= ExcEllEntB= Goodc= FAird= Poor
SolidS PASSAGE
ShEAr SEnSitivity
ABrASivES hAndlinG
SolidS hAndlinG
dry PriminG
viScouS FluidS hAndlinG
mAintEnAncE coStS
PUMP TYPE
AODD Pump A A A A A A A
Vane Pump D D D A B C C
Internal Gear Pump D D B B C A D
External Gear Pump D D D B C A D
Lobe Pump A C B C C A D
Centrifugal Pump D D B B C D B
Progressive Cavity Pump D C A B A A D
Piston/ Plunger Pump C D B C A A D
Why use an AODD Pump
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
3AO
DD P
UMPS
aoDD pumpsMArKetS ServeD
EnErGyWilden’s pumping solutions are leading the way in energy efficiency in storage terminals, biofuels and solar cell manufacturing. Wilden pumps play a vital role as transfer points from one mode of transportation to another and as safe, secure storage locations until product transfer is needed. Wilden is also committed to helping build a clean energy economy through the use of biofuels.
ProcESSWilden is a recognised leader in the process industries as you can find Wilden pumps in many of the top chemical, food and beverage and pharmaceutical plants around the world.
hyGiEnicWilden offers a wide range of hygienic and bio-pharmaceutical pumps for various food, beverage, dairy, personal care and pharmaceutical applications. When it comes to safety, performance and gentle transfer solutions, trust Wilden: the evolution of clean.
WAtEr / WAStEWAtErWilden plays a critical role in handling and transferring fluids used in municipal and industrial water and wastewater plants.
tyPicAl APPlicAtionS hAndlEd:
Raw crude oil Refined petroleum products
Chemicals Solvents
Caustics Solar cell manufacturing
Ethanol Petroleum
Biodiesel Lube oils
Gases Gasoline
Crude oil Diesel fuel
tyPicAl APPlicAtionS hAndlEd:
Acids Soap & detergents
Solvents Paints, inks & coatings
General chemicals Cosmetics
Pulp and paper Solvent-less coating
Low solvent coating Alcohols
Caustics
tyPicAl APPlicAtionS hAndlEd:
Personal care Pharmaceutical/biopharm
Confectionery Sauces, purees and beverages
Fruits and vegetables High purity product transfer
Poultry, fish and meat Solvent-less coating
Filling/batching Ingredient receiving/ unloading
Dairy
tyPicAl APPlicAtionS hAndlEd:
Wastewater systems Potable water systems
Rehabilitation systems Water treatment supply
Distribution Collection and disposal
Metal fabrication
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
44aoDD pumps
MAterIALS OF CONStrUCtION OPtIONS
mEtAl • Aluminium
• Cast Iron
• 316 Stainless Steel
• 316 Hastelloy “C”
PlAStic • Polypropylene
• PVDF
• PTFE
The liquids classified and listed below usually cannot be handled with Neoprene or Buna-N and will probably require Wil-FlexTM, Viton®, Nordel and/or Teflon®.
The Wilden range has the widest of pump materials of construction options available in the field of air operated diaphragm pumps.
tEmPErAturE limitS For PlASticS
Polypropylene 0° C to 79.4° C
Polyethylene 0° C to 70° C
PVDF (Kynar) -12.2° C to 107.2° C
Teflon PFA1 -28.9° C to 107.2° C
Acetal -28.9° C to 82.2° C
Nylon -17.8° C to93.3° C
1 -28.9° C to 148.9° C Ultrapure II and III models only.
Wetted/ Non-Wetted Materials
ElAStomErS
Wilden offer a range of diaphragms in their Ultra-flex program which guarantees longer life. The Ultra-Flex has a convolute shape, altered fabric placement which with unique hardware work together to decrease unit loading on the diaphragm and distribute stress. Material options include: Neoprene, Buna-N, EPDM, Viton.
Ultra-Flex Diaphragm technology.
Materials of Construction Options. The Wilden range has the widest of pump materials of construction options available in the field of air operated diaphragm pumps.
WETTED/ NON-WETTED MATERIALS Metal
Aluminium
Cast Iron
316 Stainless Steel
316 Hastelloy “C”
Plastic Polypropylene
PVDF
PTFE
TEMPERATURE LIMITS FOR PLASTICS Polypropylene 0° C to 79.4° C Polyethylene 0° C to 70° C PVDF (Kynar) -12.2° C to 107.2° C Teflon PFA1 -28.9° C to 107.2° C Acetal -28.9° C to 82.2° C Nylon -17.8° C to93.3° C 1 -28.9° C to 148.9° C Ultrapure II and III models only.
ELASTOMERS
RUBBER COMPOUNDS. Wilden pumps use a variety of rubber compounds manufactured specifically for use as elastomers. These compounds consist of natural rubber and man-made additives to increase the compounds’ resistance to specific types of fluids. Diaphragms made of these compounds are all reinforced with a nylon fabric mesh which lends dimensional stability and strength to the compound.
COMPOUND COLOUR CODE MOULD STAMP TEMPERATURE LIMITS SUITABLE APPLICATIONS
Neoprene Green NE -17.8° C to 93.3° C An excellent general purpose material for use in non-aggressive applications such as water based slurries, well water or sea water. Exhibits excellent flex life and low cost.
Buna-N Red BN -12.2° C to 82.2° C Excellent for applications involving petroleum/ oil- based fluids such as leaded gasolines, fuel oils, non-synthetic hydraulic oils, kerosene, turpentines and motor oils.
EPDM Blue ND -51.1° C to 137.8° C Excellent for use in applications requiring extremely cold temperatures. May also be used as a low cost alternative when pumping dilute acids or caustics.
Viton ® Silver VT -40.0° C to 76.7° C
Excellent for use in applications requiring extremely hot temperatures. May also be used with aggressive fluids such as aromatic or chlorinated hydrocarbons and highly aggressive acids. Teflon® would normally be used for these applications as its flex life is better than Viton® however, in applications requiring a suction lift outside the range of Teflon®, Viton® will be the preferred option.
THERMOPLASTIC COMPOUNDS.
Along with rubber compound elastomers, Wilden also use various thermoplastic elastomer compounds, listed below. These compounds are made entirely of man-made elements and are injection moulded to shape. They do not require reinforcing due to their inherent dimensional stability and tensile strength.
COMPOUND COLOUR CODE TEMPERATURE LIMITS SUITABLE APPLICATIONS
Polyurethane Clear -12.2° C to 65.6° C An excellent general purpose material for use in non-aggressive applications. Exhibits excellent flex life and durability. Wilden’s most economical diaphragm. Also available as part of the EZ-Instal flex profile diaphragm line.
Wil-Flex Orange -40° C to 107.2° C
Made of Santoprene, this material is an excellent low cost alternative to PTFE in many acidic and caustic applications such as sodium hydroxide, sulfuric or hydrochloric acids. Wil-Flex offers excellent abrasion resistance and durability at a cost comparable to Neoprene. Sanitary options include: full stroke length Integral Piston Diaphragms (IPD) and a sanitary material with a special profile allowing for an “easy install”.
Saniflex Cream -28.9° C to 104.4° C
Made of Hytrel, Saniflex diaphragms exhibit excellent abrasion resistance, flex life and durability. This material is FDA approved for food processing applications. This outstanding general purpose diaphragm is also available as part of the Ez-Instal Flex-profile line.
Geolast Red -40° C to 82° C Equivalent to Nitrile (Buna-N) Geolast is an injection moulded material that is an excellent choice for applications requiring enhanced oil resistance. This material exhibits exceptional performance for a variety of fluids.
PTFE ELASTOMERS.
Teflon PTFE is one of the most chemically inert man-made compounds known. Wilden engineers were the first to discover that by reinforcing a moulded Teflon PTFE diaphragm with concentric ribs they could control the flex pattern. The ribbed design extended the flex life 5 – 10 times longer than that of any other PTFE diaphragms. This mad the use of Teflon in diaphragm pumps cost effective, greatly expanding the range of applications where a diaphragm pump can be utilised. As it is not an elastic material, Teflon diaphragms require a rubber back-up diaphragm to provide flexibility and memory.
COMPOUND COLOUR CODE TEMPERATURE LIMITS SUITABLE APPLICATIONS
Teflon PTFE White -4.4° C to 104.4° C
Excellent choice when pumping highly aggressive fluids such as aromatic or chlorinated hydrocarbons, acids, caustics, ketones and acetates. Exhibits good flex life when compared to a standard rubber diaphragm pump. Wilden also offers PTFE integral piston diaphragms that offer superior product containment. The smooth contoured shape makes this an excellent choice for sanitary or ultra-pure applications.
ULTRA-FLEX DIAPHRAGM TECHNOLOGY.
Wilden offer a range of diaphragms in their Ultra-flex program which guarantees longer life. The Ultra-Flex has a convolute shape, altered fabric placement which with unique hardware work together to decrease unit loading on the diaphragm and distribute stress. Material options include: Neoprene, Buna-N, EPDM, Viton.
Materials of Construction Options. The Wilden range has the widest of pump materials of construction options available in the field of air operated diaphragm pumps.
WETTED/ NON-WETTED MATERIALS Metal
Aluminium
Cast Iron
316 Stainless Steel
316 Hastelloy “C”
Plastic Polypropylene
PVDF
PTFE
TEMPERATURE LIMITS FOR PLASTICS Polypropylene 0° C to 79.4° C Polyethylene 0° C to 70° C PVDF (Kynar) -12.2° C to 107.2° C Teflon PFA1 -28.9° C to 107.2° C Acetal -28.9° C to 82.2° C Nylon -17.8° C to93.3° C 1 -28.9° C to 148.9° C Ultrapure II and III models only.
ELASTOMERS
RUBBER COMPOUNDS. Wilden pumps use a variety of rubber compounds manufactured specifically for use as elastomers. These compounds consist of natural rubber and man-made additives to increase the compounds’ resistance to specific types of fluids. Diaphragms made of these compounds are all reinforced with a nylon fabric mesh which lends dimensional stability and strength to the compound.
COMPOUND COLOUR CODE MOULD STAMP TEMPERATURE LIMITS SUITABLE APPLICATIONS
Neoprene Green NE -17.8° C to 93.3° C An excellent general purpose material for use in non-aggressive applications such as water based slurries, well water or sea water. Exhibits excellent flex life and low cost.
Buna-N Red BN -12.2° C to 82.2° C Excellent for applications involving petroleum/ oil- based fluids such as leaded gasolines, fuel oils, non-synthetic hydraulic oils, kerosene, turpentines and motor oils.
EPDM Blue ND -51.1° C to 137.8° C Excellent for use in applications requiring extremely cold temperatures. May also be used as a low cost alternative when pumping dilute acids or caustics.
Viton ® Silver VT -40.0° C to 76.7° C
Excellent for use in applications requiring extremely hot temperatures. May also be used with aggressive fluids such as aromatic or chlorinated hydrocarbons and highly aggressive acids. Teflon® would normally be used for these applications as its flex life is better than Viton® however, in applications requiring a suction lift outside the range of Teflon®, Viton® will be the preferred option.
THERMOPLASTIC COMPOUNDS.
Along with rubber compound elastomers, Wilden also use various thermoplastic elastomer compounds, listed below. These compounds are made entirely of man-made elements and are injection moulded to shape. They do not require reinforcing due to their inherent dimensional stability and tensile strength.
COMPOUND COLOUR CODE TEMPERATURE LIMITS SUITABLE APPLICATIONS
Polyurethane Clear -12.2° C to 65.6° C An excellent general purpose material for use in non-aggressive applications. Exhibits excellent flex life and durability. Wilden’s most economical diaphragm. Also available as part of the EZ-Instal flex profile diaphragm line.
Wil-Flex Orange -40° C to 107.2° C
Made of Santoprene, this material is an excellent low cost alternative to PTFE in many acidic and caustic applications such as sodium hydroxide, sulfuric or hydrochloric acids. Wil-Flex offers excellent abrasion resistance and durability at a cost comparable to Neoprene. Sanitary options include: full stroke length Integral Piston Diaphragms (IPD) and a sanitary material with a special profile allowing for an “easy install”.
Saniflex Cream -28.9° C to 104.4° C
Made of Hytrel, Saniflex diaphragms exhibit excellent abrasion resistance, flex life and durability. This material is FDA approved for food processing applications. This outstanding general purpose diaphragm is also available as part of the Ez-Instal Flex-profile line.
Geolast Red -40° C to 82° C Equivalent to Nitrile (Buna-N) Geolast is an injection moulded material that is an excellent choice for applications requiring enhanced oil resistance. This material exhibits exceptional performance for a variety of fluids.
PTFE ELASTOMERS.
Teflon PTFE is one of the most chemically inert man-made compounds known. Wilden engineers were the first to discover that by reinforcing a moulded Teflon PTFE diaphragm with concentric ribs they could control the flex pattern. The ribbed design extended the flex life 5 – 10 times longer than that of any other PTFE diaphragms. This mad the use of Teflon in diaphragm pumps cost effective, greatly expanding the range of applications where a diaphragm pump can be utilised. As it is not an elastic material, Teflon diaphragms require a rubber back-up diaphragm to provide flexibility and memory.
COMPOUND COLOUR CODE TEMPERATURE LIMITS SUITABLE APPLICATIONS
Teflon PTFE White -4.4° C to 104.4° C
Excellent choice when pumping highly aggressive fluids such as aromatic or chlorinated hydrocarbons, acids, caustics, ketones and acetates. Exhibits good flex life when compared to a standard rubber diaphragm pump. Wilden also offers PTFE integral piston diaphragms that offer superior product containment. The smooth contoured shape makes this an excellent choice for sanitary or ultra-pure applications.
ULTRA-FLEX DIAPHRAGM TECHNOLOGY.
Wilden offer a range of diaphragms in their Ultra-flex program which guarantees longer life. The Ultra-Flex has a convolute shape, altered fabric placement which with unique hardware work together to decrease unit loading on the diaphragm and distribute stress. Material options include: Neoprene, Buna-N, EPDM, Viton.
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
5AO
DD P
UMPS
Along with rubber compound elastomers, Wilden also use various thermoplastic elastomer compounds, listed below. These compounds are made entirely of man-made elements and are injection moulded to shape. They do not require reinforcing due to their inherent dimensional stability and tensile strength.
Teflon PTFE is one of the most chemically inert man-made compounds known. Wilden engineers were the first to discover that by reinforcing a moulded Teflon PTFE diaphragm with concentric ribs they could control the flex pattern. The ribbed design extended the flex life 5 – 10 times longer than that of any other PTFE diaphragms. This mad the use of Teflon in diaphragm pumps cost effective, greatly expanding the range of applications where a diaphragm pump can be utilised. As it is not an elastic material, Teflon diaphragms require a rubber back-up diaphragm to provide flexibility and memory.
comPound colour codE
tEmPErAturE limitS SuitABlE APPlicAtionS
Polyurethane Clear -12.2° C to 65.6° C
An excellent general purpose material for use in non-aggressive applications. Exhibits excellent flex life and durability. Wilden’s most economical diaphragm. Also available as part of the EZ-Instal flex profile diaphragm line.
Wil-Flex Orange -40° C to 107.2° C
Made of Santoprene, this material is an excellent low cost alternative to PTFE in many acidic and caustic applications such as sodium hydroxide, sulfuric or hydrochloric acids. Wil-Flex offers excellent abrasion resistance and durability at a cost comparable to Neoprene. Sanitary options include: full stroke length Integral Piston Diaphragms (IPD) and a sanitary material with a special profile allowing for an “easy install”.
Saniflex Cream -28.9° C to 104.4° C
Made of Hytrel, Saniflex diaphragms exhibit excellent abrasion resistance, flex life and durability. This material is FDA approved for food processing applications. This outstanding general purpose diaphragm is also available as part of the Ez-Instal Flex-profile line.
Geolast Red -40° C to 82° CEquivalent to Nitrile (Buna-N) Geolast is an injection moulded material that is an excellent choice for applications requiring enhanced oil resistance. This material exhibits exceptional performance for a variety of fluids.
comPound colour codE
tEmPErAturE limitS SuitABlE APPlicAtionS
Teflon PTFE White -4.4° C to 104.4° C
Excellent choice when pumping highly aggressive fluids such as aromatic or chlorinated hydrocarbons, acids, caustics, ketones and acetates. Exhibits good flex life when compared to a standard rubber diaphragm pump.Wilden also offers PTFE integral piston diaphragms that offer superior product containment. The smooth contoured shape makes this an excellent choice for sanitary or ultra-pure applications.
tHerMOPLAStIC COMPOUNDS
PtFe eLAStOMerS
Wilden pumps use a variety of rubber compounds manufactured specifically for use as elastomers. These compounds consist of natural rubber and man-made additives to increase the compounds’ resistance to specific types of fluids. Diaphragms made of these compounds are all reinforced with a nylon fabric mesh which lends dimensional stability and strength to the compound.
comPound colour codE
mould StAmP
tEmPErAturE limitS SuitABlE APPlicAtionS
Neoprene Green NE -17.8° C to 93.3 °C
An excellent general purpose material for use in non-aggressive applications such as water based slurries, well water or sea water. Exhibits excellent flex life and low cost.
Buna-N Red BN -12.2° C to 82.2 °C
Excellent for applications involving petroleum/oil-based fluids such as leaded gasolines, fuel oils, non-synthetic hydraulic oils, kerosene, turpentines and motor oils.
EPDM Blue ND -51.1° C to 137.8 °C
Excellent for use in applications requiring extremely cold temperatures. May also be used as a low cost alternative when pumping dilute acids or caustics.
Viton® Silver VT -40.0° C to 76.7 °C
Excellent for use in applications requiring extremely hot temperatures. May also be used with aggressive fluids such as aromatic or chlorinated hydrocarbons and highly aggressive acids. Teflon® would normally be used for these applications as its flex life is better than Viton® however, in applications requiring a suction lift outside the range of Teflon®, Viton® will be the preferred option.
rUBBer COMPOUNDS
aoDD pumpsMAterIALS OF CONStrUCtION OPtIONS
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
66aoDD pumps
AIr DIStrIBUtION SYSteMS
mArkEt PoSition: FEAturES: APPlicAtion trAitS: AvAilABility:Variable control (discharge flow rates & air consumption)
Efficiency Management Sys-tem (EMSTM)
Maximise performance and efficiency 13mm(1/2")
Superior flow rate Metal and plastic material options Process applications 25mm(1")
Superior anti-freezing Non-stalling unbalanced spool Max.MeanTime 38mm(1-1/2")
Submersible options Simple and durable design Between Repair (MTBR) 51mm(2")
Lube-free operation 76mm(3")
ON/OFF reliability 102mm(4")
Most efficient flow rate per air consumption usage
ATEX models available
mArkEt PoSition: FEAturES: APPlicAtion trAitS:Cost efficient: 50% less expensive than an electronically actuated ADS
Simple and durable pump design Greater yield per SCFM of air used
Faster return on investment Simple components Wider application range
Robust design for harsh operating conditions Faster,easier setup time Repeatable,predictable performance
Metered air consumption for less product waste Plug-N-Play operation Less product waste
Creates the highest performance ratio No electricity needed Max Mean Time Between Repair (MTBR)
Superior flow rate Precise flow rate at start-up Increased application range/ compatibility
Superior anti-freezing Non-stalling unbalanced spool Minimum training required
Single-point exhaust options Drop-in configuration capabil-ity
No special skill set needed for mainte-nance or operations
Lube-free operation Reduced energy consumption
Reduced maintenance costs Lower carbon footprint
ON/OFF reliability ATEX-compatible for use in explosive atmospheres
Environmental sensitivity
mArkEt PoSition: FEAturES: APPlicAtion trAitS: AvAilABility:Anti-freezing Plastic center block Maximum reliability 6mm(1/4")
ON/OFF reliability Non-stalling unbalanced spool Process applications 13mm(1/2")
Longest-lasting wear parts Simple and durable design Max. Mean Time Between Repair (MTBR) 25mm (1")
Lube-free operation 38mm (1-1/2")
51mm (2")
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
7AO
DD P
UMPS
aoDD pumps
mArkEt PoSition: FEAturES: APPlicAtion trAitS: AvAilABility:Direct electrical interface Externally controlled System automation 6mm(1/4")
Superior ON/OFF reliability Various voltage options 4-20 mA pH Adjusting 13mm(1/2")
Reduced systems costs Nema 4, Nema 7 or ATEX Batching applications 25 mm (1")
Lube-free operation Simple installation OEM accounts
mArkEt PoSition: FEAturES: APPlicAtion trAitS: AvAilABility:
Low initial cost Metal air distribution system Utilitarian type applications 13mm (1/2")
Largest installed base Durable Robust design 25mm (1")
Proven technology Fewest replaceable parts Submersible 38mm (1-1/2")
Originated the AODDP industry Ease of maintenance Portable 51mm (2")
76mm (3")
SEriES oriGinAl AdvAncEd
mAtEriAl oF conStruction
PlAStic mEtAl PlAStic mEtAl
Size
1/4" ü ü ü ü ü1/2" ü ü ü ü ü ü1" ü ü ü ü ü ü ü ü ü ü ü1 1/2" ü ü ü ü ü ü ü ü ü ü ü2" ü ü ü ü ü ü ü ü ü ü ü3" ü ü ü ü ü ü ü4" ü ü ü
Turbo-Flo
Accu-Flo
Pro-Flo
Pro-Flo X
Pro-Flo S
Turbo-Flo
Accu-Flo
Pro-Flo
Pro-Flo X
Pro-Flo S
Turbo-Flo
Accu-Flo
Pro-Flo
Pro-Flo X
Pro-Flo S
Turbo-Flo
Accu-Flo
Pro-Flo
Pro-Flo X
Pro-Flo S
AIr DIStrIBUtION SYSteMS
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
88aoDD pumps
PrINCIPLeS OF OPerAtIONthings to think About When Selecting an Air-operated double-diaphragm Pump (AoddP)
Application
Air Distribution System (ADS)
Installation
Wetted Materials
Distributors
resources
• What application will the pump be used in? • What are you pumping?
• Do you need lube-free operation?
• Does the pump need to be submersible?
• What cleaning fluids would be used to clean the pump?
• What are your performance parameters (flowrates, air consumption, viscosities, suction lift)?
• Do you need a pulsation dampener?
• What ADS best suits your application needs?
• How reliable is the ADS?
• How efficient is the ADS?
• Do you need on/off reliability?
• Is the pump ADS ATEX approved?
• Does the ADS have anti-freezing technology?
• Does the ADS have integrated variable performance controls?
• Before installation please read the caution section of the pump manual.
• What are your piping considerations (valves, elbows, pipe friction losses, etc.)?
• Do you have sufficient air pressure and air volume for the pump?
• What is the MTBR (Mean Time Between Repair) of the AODDP?
• What are your installation parameters (self priming, positive suction head, high vacuum, heat generation, dry run capable, submersible, large solids passage, variable flow & pressure, shear sensitive)?
• Ease of maintenance: is the pump easy to clean, assemble/disassemble?
• What media will you be pumping?
• What is the chemical compatibility of the elastomer?
• What are the temperature limits of the wetted material and elastomer?
• How abrasive is the media being pumped?
• Do diaphragm configurations affect flow?
• Is your distributor local?
• Can the distributor fully support your fluid transfer needs?
• Are they a full-stocking, full-service distributor?
• How good is delivery? Is it less than 3 weeks?
• Is the distributor formally educated in specifying and maintaining your system?
• www.wildenpump.com
• Locating your Authorised Wilden Distributor: www.wildendistributor.com
• Everything you need to know about a Wilden pump: Pump Users Guide II (Consult the factory or your Wilden Distributor)
• Engineering & Operations Manuals: www.wildenpump.com in the Tech Info section
• Cavitation and Friction Guide & Safety Supplement: www.wildenpump.com in the Tech Info section
• Electronic Chemical Guide & Conversion Calculator: www.wildenpump.com in the Tech Info section
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
9AO
DD P
UMPS
aoDD pumpsSee How It WorksFigure 1.
Figure 2.
Figure 3.
Air supply is directed to the left air chamber behind diaphragm A. Diaphragm A is driven by compressed air away from the center section and toward the liquid chamber. The opposite diaphragm (diaphragm B) is pulled in by the common shaft. Diaphragm B is now on its suction stroke while diaphragm A is on its discharge stroke. The movement of diaphragm B toward the center block opens the bottom right check valve and closes the upper right check valve. This movement creates a vacuum within liquid chamber B. Atmospheric pressure forces fluid into the inlet manifold, past the lower right inlet check valve and into liquid chamber B. When the pressurized diaphragm A reaches its full stroke, the air distribution system redirects the air supply to the back side of diaphragm B.
The pressurized air forces diaphragm B away from the center block and the common shaft pulls diaphragm A toward the center section. The air chamber on side A, exhausts its air to atmosphere. Diaphragm B is now beginning its discharge stroke, while diaphragm A is beginning its suction stroke. The movement of diaphragm B toward the center block, opens the bottom right check valve and closes the upper right check valve. Diaphragm A creates a vacuum that begins to open the inlet check valve (lower left) and closes the discharge check valve (upper left).
These same hydraulic forces lift the discharge valve ball off its seat while the opposite discharge valve ball is forced onto its seat, forcing fluid to flow through the left side of the pump and out the discharge manifold. The movement of diaphragm A to the center block of the pump creates a vacuum within liquid chamber A. Atmospheric pressure forces fluid into the inlet manifold of the pump. The inlet valve ball is forced off its seat allowing the fluid to enter the right liquid chamber.
As the pump reaches its original starting point, each diaphragm has gone through one suction and one discharge stroke. This movement constitutes one pumping cycle. The pump will take several cycles to completely prime depending on the application variables.
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
1010
Features• ADS:Pro-Flo®, Pro-FloXTM, Accu-FloTM
• Anti-freezing technology
• Large solids passage
• Portable & Submersible
• Multiple liquid connections available
• Lube-free options
Performance Data• Max flow rates: 591 lpm (156gpm)
• Max suction lift: 9.5 m (31.0') Wet, 7.0 m (23.0') Dry • Max disp.per stroke:2.9L (0.77gal)
• Max discharge pressure: 8.6bar (125psig)
• Max size solids: 6.4mm (1/4")
tech Data• Sizes: 6mm (1/4") through 51mm (2")
• Materials: Polypropylene, PVDF, PFA
• Material Temperatures: Up to 107°C (225°F)
• Elastomers: Buna-N, Neoprene, EPDM, Viton®, Wil-FlexTM, SaniflexTM, Polyurethane, PTFE, Geolast®
Features• ADS: Pro-Flo® SHIFT, Pro-Flo®, Pro-Flo X™,
Accu-Flo™
• All metal bolted construction
• Higher flow rates
• Superior containment
• Anti-Freezing technology
• Portable & Submersible
• BSPT (NPT) or DIN (ANSI) liquid connections available
• Lube-free operation
Performance Data• Max flow rates: 1021 lpm (270 gpm)
• Max suction lift: 9.5 m (31.2') Wet, 7.6 m (25.0'), Dry
• Max disp. per stroke: 6.09 L (1.61 gal)
• Max discharge pressure: 221 bar (3200 psig)
• Max size solids: 76 mm (3")
tech Data• Sizes: 6 mm (1/4") through 76 mm (3")
• Materials: Aluminum, Ductile Iron, Stainless Steel, Alloy C
• Elastomer Temperatures: Up to 177°C (350°F)
• Elastomers: Buna-N, Neoprene, EPDM, Viton®, Wil-Flex™, Saniflex™, Polyurethane, PTFE , Geolast®
aoDD pumps
Original Series Pump
Advanced Series Pump
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
11AO
DD P
UMPS
aoDD pumpsPUMP DeSCrIPtION SYSteM
WILDEN PUMP & ENGINEERING, LLC 6 WIL-23000-Q-05 Price Book 1/08 – REPLACES WIL-23000-Q-04
NOTE: Not all combinations are available on all pump models. *Some models use a single piece CENTER SECTION that incorporates air chambers and the center block into one part.
ATEX
X = ATEX 100
AIR DISTRIBUTION SYSTEM
AxP = ACCU-FLO™ -PRO-FLO® BASEAxT = ACCU-FLO™ - TURBO-FLO™ BASEAxB = ACCU-FLO™ - BLOCK BASEH = HIGH PRESSUREHxS = HIGH PRESSURE - SIMPLEX TYPEP = PRO-FLO®
PV = PRO-FLO V™PX = PRO-FLO X™T = TURBO-FLO™UA = UNI-FLO™ A-SERIESUH = UNI-FLO™ H-SERIESUS = UNI-FLO™ S-SERIESUU = UNI-FLO™ U-SERIESUX = UNI-FLO™ X-SERIES
MODEL SIZE
025 = 6 mm (1/4")038 = 10 mm (3/8")050 = 13 mm (1/2")075 = 19 mm (3/4")1 = 13 mm (1/2")2 = 25 mm (1")3 = 32 mm (1-1/4")4 = 38 mm (1-1/2")8 = 51 mm (2")15 = 76 mm (3")20 = 102 mm (4")25 = 6 mm (1/4")38 = 10 mm (3/8")100 = 13 mm (1/2")200 = 25 mm (1")400 = 38 mm (1-1/2")800 = 51 mm (2")810 = 51 mm (2") TOP INLET1500 = 76 mm (3")1510 = 76 mm (3") TOP INLET
WETTED PARTS & OUTER PISTON
AA = ALUMINUM / ALUMINUMAM = ALUMINUM / MILD STEEL
AS = ALUMINUM / STAINLESS STEELAZ = ALUMINUM / NO OUTER PISTONDZ = CONDUCTIVE POLYETHYLENE /
NO OUTER PISTONEZ = POLYETHYLENE / NO OUTER PISTONFZ = CONDUCTIVE PTFE /
NO OUTER PISTONHH = ALLOY C / ALLOY CHZ = ALLOY C / NO OUTER PISTONKK = PVDF / PVDFKZ = PVDF / NO OUTER PISTONPP = POLYPROPYLENE /
POLYPROPYLENEPK = POLYPROPYLENE / PVDFPZ = POLYPROPYLENE /
NO OUTER PISTONTT = PTFE / PTFETZ = PTFE / NO OUTER PISTON
SS = STAINLESS STEEL / STAINLESS STEEL
SZ = STAINLESS STEEL / NO OUTER PISTON
WW = DUCTILE IRON / DUCTILE IRONWM = DUCTILE IRON / MILD STEELWS = CAST IRON / MILD STEELWZ = DUCTILE IRON / NO OUTER PISTON
AIR CHAMBER*
A = ALUMINUMC = PTFE COATED ALUMINUMM = MILD STEELN = NICKEL PLATED ALUMINUMP = POLYPROPYLENES = 316 STAINLESS STEELS = 316L STAINLESS STEELV = HALAR® COATED ALUMINUMW = DUCTILE IRON
CENTER BLOCK*
A = ALUMINUMC = PTFE COATED ALUMINUMM = MILD STEELN = NICKEL PLATED ALUMINUMP = POLYPROPYLENES = 316 STAINLESS STEELS = 316L STAINLESS STEEL
CENTER SECTION*
AA = ALUMINUMDD = CONDUCTIVE POLYETHYLENEEE = POLYETHYLENEFF = CONDUCTIVE PTFE
GG = CONDUCTIVE ACETAL
JJ = CONDUCTIVE POLYPROPYLENEKK = PVDFLL = ACETALPP = POLYPROPYLENETT = PTFEYY = NYLON
AIR VALVE
A = ALUMINUMB = BRASSC = PFA COATED BRASSD = BRASS W/OIL BOTTLEE = POLYETHYLENE
G = CONDUCTIVE ACETAL
J = CONDUCTIVE POLYPROPYLENEK = PVDFL = ACETALN = NICKEL PLATED BRASSP = POLYPROPYLENES = STAINLESS STEEL
DIAPHRAGMS
AWS = WIL-FLEX™, SOFT SHOREBNL = BUNA-N, IPD (Red Dot)BNS = BUNA-N (Red Dot)BNU = BUNA-N, ULTRA-FLEX™ (Red Dot)EPL = EPDM, IPD (Blue Dot)
EPS = EPDM (Blue Dot)EPU = EPDM, ULTRA-FLEX™ (Blue Dot)FBS = SANITARY BUNA-N
(Two Yellow Dots)FES = SANITARY EPDM (Two Blue Dots)FNS = SANITARY NEOPRENEFSS = SANIFLEX™ (Cream)FVS = SANITARY VITON® (Two White
Dots)FWS = SANITARY WIL-FLEX™LEL = PTFE EPDM BACKED, IPD
(White)LNL = PTFE NEOPRENE BACKED, IPD
(White)NES = NEOPRENE (Green Dot)NEU = NEOPRENE, ULTRA-FLEX™
(Green Dot)PEL = POLYETHYLENE, IPDPUS = POLYURETHANE (Clear)TEL = PTFE w/EPDM BACK-UP
O-RING, IPD (White)TEU = PTFE w/EPDM BACK-UP
(White)TFL = PTFE, IPD, NO BACK-UP
(White)THU = PTFE w/HIGH TEMP BUNA-N
BACK-UP (White)TNL = PTFE w/NEOPRENE BACK-UP
O-RING, IPD (White)TNU = PTFE w/NEOPRENE BACK-UP
(White)TSU = PTFE w/SANIFLEX™ BACK-UP
(White)TVL = PTFE w/VITON® BACK-UP
O-RING, IPD (White)TVU = PTFE w/VITON® BACK-UP
(White) VTS = VITON® (White Dot)VTU = VITON®, ULTRA-FLEX™
(White Dot)WFS = WIL-FLEX™ (Orange Dot)XBS = CONDUCTIVE BUNA-N (Two
Red Dots)XES = CONDUCTIVE EPDM (Two Blue
Dots)XNS = CONDUCTIVE NEOPRENE (Two
Green Dots)XVS = CONDUCTIVE VITON® (Two
White Dots)
VALVE BALLS
BN = BUNA-N (Red Dot)EP = EPDM (Blue Dot)FB = SANITARY BUNA-N (Two Yellow
Dots)FE = SANITARY EPDM (Two Blue Dots)FS = SANFLEX™ (Cream)FV = SANITARY VITON® (Two White
Dots)
FW = SANITARY WIL-FLEX™NE = NEOPRENE (Green Dot)PU = POLYURETHANE (Brown)TF = PTFE (White) SS = STAINLESS STEELVT = VITON® (White Dot)WF = WIL-FLEX™ (Orange Dot)
CHECK VALVES
CE = POLYETHYLENE CYLINDERCT = PTFE CYLINDER (White)SF = 304 STAINLESS STEEL FLAPSF = 316L STAINLESS STEEL FLAPTM = PTFE MUSHROOM (White)2F = 316L STAINLESS STEEL FLAP (2”)
VALVE SEAT
A = ALUMINUMBN = BUNA-N (Red Dot)D = CONDUCTIVE POLYETHYLENE
(Black)E = POLYETHYLENE (White)EP = EPDM (Blue Dot)F = CONDUCTIVE PTFE (Black)FS = SANIFLEX™ (Cream)G = CONDUCTIVE ACETAL (Black)H = ALLOY CK = PVDFM = MILD STEELNE = NEOPRENE (Green Dot)P = POLYPROPYLENEPU = POLYURETHANE (Brown)S = STAINLESS STEELS = 316L POLISHED STAINLESS
STEELT = PFA (White)T = PTFE (White)VT = VITON® (White Dot)WF = WIL-FLEX™ (Orange Dot)
VALVE SEAT AND/OR MANIFOLD O-RING
BN = BUNA-N (Red Dot)EP = EPDM (Blue Dot)FS = SANIFLEX™ (Cream)FS = FLUORO-SEAL™PU = POLYURETHANE (Brown)TF = PTFE (White)TV = PTFE ENCAPSULATED VITON®
WF = WIL-FLEX™ (Orange Dot)
FLANGE OR MANIFOLD GASKETS
EP = EPDM (Blue Dot)FB = SANITARY BUNA-N (Two Yellow
Dots)FE = SANITARY EPDM (Two Blue Dots)TF = PTFE (White)VT = VITON® (White Dot)
CURRENT GENERATION
PUMP DESCRIPTION SYSTEM
XX XXX / XXXXX / XXX / XX / XXX / XXXX
O-RINGS
MODEL VALVE SEAT
AIR DISTRIBUTIONSYSTEM
VALVE BALLS/CHECKS
DIAPHRAGMS
AIR VALVE
ATEX CENTER BLOCK OR CENTER SECTION
AIR CHAMBER OR CENTER SECTION
WETTED PARTS AND OUTER PISTON
SPECIALTYCODE
(if applicable)
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
1212
P25 Plastic
P25 Plastic
P.025 Plastic
P.025 Metal
P.025 Plastic
P.025 Metal
P.025 Plastic
P.025 Metal
aoDD pumps1/4" PUMPS
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS00-9736 P.025/AMPPP/WFS/TF/ATF/0014 Aluminium Polypropylene Wilflex (Santoprene)
00-9735 P.025/AMPPP/BNS/TF/ABN/0014 Aluminium Polypropylene Buna (Nitrile)
00-9740 P.025/SZPPP/TNL/TF/STV/0014 Stainless Steel Polypropylene PTFE (Neoprene back up)
00-10064 P.025/SZPPP/EPS/TF/SBN/0014 Stainless Steel Polypropylene EPDM (Nordel)
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS00-9604 P.025/KZPPP/TNL/TF/KTV PVDF (Kynar) Polypropylene PTFE (Neoprene back up)
00-9606 P.025/KKPPP/WFS/TF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene)
00-9608 P.025/PPPPP/BNS/TF/PBN Polypropylene Polypropylene Buna (Nitrile)
00-9616 P.025/PZPPP/TNL/TF/PTV Polypropylene Polypropylene PTFE (Neoprene back up)
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS00-10005 P25/PZPPP/TNL/TF/PTV/0014 Polypropylene Polypropylene PTFE (Neoprene back up)
00-10006 P25/KZPPP/TNL/TF/PTV/0014 PVDF (Kynar) Polypropylene PTFE (Neoprene back up)
itEmdimEnSion (mm)
A 165B 84C 148D 136E 13F 114G 92H 60J 6K 70L 47
itEmdimEnSion (mm)
A 145B 25C 94D 140E 163F 56G 30H 30J 114K 61L 74M 53N 64P Ø 5
itEmdimEnSion (mm)
A 173B 102C 25D 157E 127F 173G 61H 99J 53K 81L 10M 5N 150
P.025 MetAL PUMP- Original Series
P.025 PLAStIC PUMP- Original Series
P25 PLAStIC PUMP- Advanced Series
Models
Models
Models
Dimensions
Dimensions
Dimensions
Performance Curves - 6mm (1/4")
Performance Curves - 6mm (1/4")
Performance Curves - 6mm (1/4")
12
1[3.8]
2[7.6]
3[11.3]
4[15.1]
5[18.9]
(2) [3.4](3) [5.1]
(4) [6.8](5) [8.5]
(1) [1.7]
1[3.8]
2[7.6]
3[11.3]
4[15.1]
5[18.9]
(2) [3.4](3) [5.1]
(4) [6.8](5) [8.5]
(1) [1.7]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
16[61]
(8) [13.6]
(12) [20.4]
(4) [6.8]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
16[61]
(8) [13.6]
(12) [20.4]
(16) [27.2]
(4) [6.8]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
16[61]
(20) [34]
(5) [8]
(15) [25]
(10) [17]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
16[61]
(20) [34]
(5) [8]
(15) [25]
(10) [17]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
(8) [13.6]
(12) [20.4]
(16) [27.2]
(4) [6.8]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
(8) [13.6]
(12) [20.4]
(16) [27.2]
(4) [6.8]
METAL CURVESRUBBER PTFE
P.025 6 mm (1/4")METAL
P1 13 mm (1/2")METAL
PX1 13 mm (1/2")METAL
T1 13 mm (1/2")METAL
RUBBER PTFE
RUBBER PTFE
RUBBER PTFE
18
1[4]
2[8]
3[11]
4[14]
5[19]
(2) [3.4]
(3) [5.1]
(4) [6.8]
(5) [8.5]
(1) [1.7]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
(8) [13.6]
(12) [20.4]
(4) [6.8]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
(8) [13.6](12) [20.4]
(16) [27.2]
(4) [6.8]
1[4]
2[8]
3[11]
4[14]
5[19]
(2) [3.4](3) [5.1]
(4) [6.8]
(5) [8.5]
(1) [1.7]
PLASTIC CURVESRUBBER PTFE
P.025 6 mm (1/4")PLASTIC
P1 13 mm (1/2")PLASTIC
RUBBER PTFE
20
PLASTIC CURVES
RUBBER
RUBBER
PTFE
PTFE
PTFE
P25 6 mm (1/4") PLASTIC
P100 13 mm (1/2") PLASTIC
P200 25 mm (1") PLASTIC
2[7.6]
4[15.1]
6[22.7]
8[30.3]
10[37.9]
12[45.4]
14[53.0]
16 [60.6]
(4) [6.8]
(12) [20.4]
(20) [34.0]
(16) [27.2]
(8) [13.6]
2[7.6]
4[15.1]
6[22.7]
8[30.3]
10[37.9]
12[45.4]
14[53.0]
16 [60.6]
(4) [6.8](8) [13.6] (12) [20.4]
(16) [27.2]
(20) [34.0]
10[38]
20[76]
30[114]
40[151]
50[189]
(10) [17](20) [34]
(30) [51]
(40) [58]
(50) [85]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
(10) [17] (20) [34](30) [51]
(40) [68]
(50) [85]
N/A
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
13AO
DD P
UMPS
aoDD pumps1/2" PUMPS
6 mm (1/4”)FNPT AIR
INLET
13 mm (1/2”) FNPT AIREXHAUST
S - P
OLY
& P
VDF
R - T
EFLO
N®&
GRA
PHIT
E
13 mm (1/2”) FNPT ULTRAPURE .615 I.D. [15.62]
.844 O.D. [21.44]
13 mm (1/2”) FNPT ULTRAPURE .615 I.D. [15.62]
.844 O.D. [21.44]
A
KL
M N
P
RS
B
C
D
E
F GJ
H
ModelsmodEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS01-0110 P1/PPPPP/WFS/WF/KWF Polypropylene Polypropylene Wilflex (Santoprene)
01-2654 P1/PPPPP/TNU/TF/KTV Polypropylene Polypropylene PTFE (Neoprene back up)
01-2655 P1/PPPPP/BNS/BN/KBN Polypropylene Polypropylene Buna (Nitrile)
01-2659 P1/KKPPP/TNU/TF/KTV PVDF (Kynar) Polypropylene PTFE (Neoprene back up)
01-10087 P1/KKPPP/WFS/WF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene)
P1 13mm (1/2") PLAStIC PUMP
PlEASE notE: not all material options are listed. Please call 1300 ALL PUMPS to discuss your requirements.
itEmdimEnSion (mm)
A 31B 130C 196D 208E 218F 56G 114H 127J 203K 145L 114M 84N 102P 8R 20S 28
Dimensions Performance curves
18
1[4]
2[8]
3[11]
4[14]
5[19]
(2) [3.4]
(3) [5.1]
(4) [6.8]
(5) [8.5]
(1) [1.7]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
(8) [13.6]
(12) [20.4]
(4) [6.8]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
(8) [13.6](12) [20.4]
(16) [27.2]
(4) [6.8]
1[4]
2[8]
3[11]
4[14]
5[19]
(2) [3.4](3) [5.1]
(4) [6.8]
(5) [8.5]
(1) [1.7]
PLASTIC CURVESRUBBER PTFE
P.025 6 mm (1/4")PLASTIC
P1 13 mm (1/2")PLASTIC
RUBBER PTFE
18
1[4]
2[8]
3[11]
4[14]
5[19]
(2) [3.4]
(3) [5.1]
(4) [6.8]
(5) [8.5]
(1) [1.7]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
(8) [13.6]
(12) [20.4]
(4) [6.8]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
(8) [13.6](12) [20.4]
(16) [27.2]
(4) [6.8]
1[4]
2[8]
3[11]
4[14]
5[19]
(2) [3.4](3) [5.1]
(4) [6.8]
(5) [8.5]
(1) [1.7]
PLASTIC CURVESRUBBER PTFE
P.025 6 mm (1/4")PLASTIC
P1 13 mm (1/2")PLASTIC
RUBBER PTFE
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
1414aoDD pumps
1/2" PUMPS
Models
P100 13mm (1/2") PLAStIC PUMP
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS01-10311 P100/PPPPP/BNS/B/PBN/0014 Polypropylene Polypropylene Buna (Nitrile)
01-10315 P100/PPPPP/TNU/TF/PTV/0014 Polypropylene Polypropylene PTFE (Neoprene back up)
01-10327 P100/KKPPP/WFS/WF/PWF/0014 PVDF (Kynar) Polypropylene Wilflex (Santoprene)
01-10323 P100/KKPPP/TNU/TF/PTV/0014 PVDF (Kynar) Polypropylene PTFE (Neoprene back up)
KL
N M
P
13 mm (1/2")FNPT DIS-
CHARGE
D
A
C
E
F
G
H
J
B
13 mm (1/2")FNPT INLET
13 mm (1/2")FNPT AIR EXHAUST
6 mm (1/4")FNPT AIR INLET
itEmdimEnSion (mm)
A 208B 28C 130D 198E 224F 41G 132H 221J 361K 132L 30M 137N 109P 84R 102S 8T 203U 142V 112
Dimensions
Models
PX1 13mm (1/2") MetAL PUMP
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS01-10920 XPX1/AAAAA/BNS/BN/ABN/0014 Aluminium Aluminium Buna (Nitrile)
01-10916 XPX1/AAAAA/TNU/TF/ATV/0014 Aluminium Aluminium PTFE (Neoprene Back up)
01-10942 XPX1/SSAAA/FSS/FS/SFS/0014 Stainless Steel Aluminium Saniflex (Hytrel Food Grade)
01-10919 XPX1/SSAAA/TNU/TF/STV/0014 Stainless Steel Aluminium PTFE (Neoprene back up)
itEmdimEnSion (mm)
A 234B 51C 170D 254E 277F 25G 114H 201J 170K 145L 114M 102N 91P 8
Dimensions
12
1[3.8]
2[7.6]
3[11.3]
4[15.1]
5[18.9]
(2) [3.4](3) [5.1]
(4) [6.8](5) [8.5]
(1) [1.7]
1[3.8]
2[7.6]
3[11.3]
4[15.1]
5[18.9]
(2) [3.4](3) [5.1]
(4) [6.8](5) [8.5]
(1) [1.7]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
16[61]
(8) [13.6]
(12) [20.4]
(4) [6.8]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
16[61]
(8) [13.6]
(12) [20.4]
(16) [27.2]
(4) [6.8]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
16[61]
(20) [34]
(5) [8]
(15) [25]
(10) [17]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
16[61]
(20) [34]
(5) [8]
(15) [25]
(10) [17]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
(8) [13.6]
(12) [20.4]
(16) [27.2]
(4) [6.8]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
(8) [13.6]
(12) [20.4]
(16) [27.2]
(4) [6.8]
METAL CURVESRUBBER PTFE
P.025 6 mm (1/4")METAL
P1 13 mm (1/2")METAL
PX1 13 mm (1/2")METAL
T1 13 mm (1/2")METAL
RUBBER PTFE
RUBBER PTFE
RUBBER PTFE
12
1[3.8]
2[7.6]
3[11.3]
4[15.1]
5[18.9]
(2) [3.4](3) [5.1]
(4) [6.8](5) [8.5]
(1) [1.7]
1[3.8]
2[7.6]
3[11.3]
4[15.1]
5[18.9]
(2) [3.4](3) [5.1]
(4) [6.8](5) [8.5]
(1) [1.7]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
16[61]
(8) [13.6]
(12) [20.4]
(4) [6.8]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
16[61]
(8) [13.6]
(12) [20.4]
(16) [27.2]
(4) [6.8]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
16[61]
(20) [34]
(5) [8]
(15) [25]
(10) [17]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
16[61]
(20) [34]
(5) [8]
(15) [25]
(10) [17]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
(8) [13.6]
(12) [20.4]
(16) [27.2]
(4) [6.8]
2[8]
4[15]
6[23]
8[30]
10[38]
12[45]
14[53]
(8) [13.6]
(12) [20.4]
(16) [27.2]
(4) [6.8]
METAL CURVESRUBBER PTFE
P.025 6 mm (1/4")METAL
P1 13 mm (1/2")METAL
PX1 13 mm (1/2")METAL
T1 13 mm (1/2")METAL
RUBBER PTFE
RUBBER PTFE
RUBBER PTFE
Performance curves
Performance curves
20
PLASTIC CURVES
RUBBER
RUBBER
PTFE
PTFE
PTFE
P25 6 mm (1/4") PLASTIC
P100 13 mm (1/2") PLASTIC
P200 25 mm (1") PLASTIC
2[7.6]
4[15.1]
6[22.7]
8[30.3]
10[37.9]
12[45.4]
14[53.0]
16 [60.6]
(4) [6.8]
(12) [20.4]
(20) [34.0]
(16) [27.2]
(8) [13.6]
2[7.6]
4[15.1]
6[22.7]
8[30.3]
10[37.9]
12[45.4]
14[53.0]
16 [60.6]
(4) [6.8](8) [13.6] (12) [20.4]
(16) [27.2]
(20) [34.0]
10[38]
20[76]
30[114]
40[151]
50[189]
(10) [17](20) [34]
(30) [51]
(40) [58]
(50) [85]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
(10) [17] (20) [34](30) [51]
(40) [68]
(50) [85]
N/A
20
PLASTIC CURVES
RUBBER
RUBBER
PTFE
PTFE
PTFE
P25 6 mm (1/4") PLASTIC
P100 13 mm (1/2") PLASTIC
P200 25 mm (1") PLASTIC
2[7.6]
4[15.1]
6[22.7]
8[30.3]
10[37.9]
12[45.4]
14[53.0]
16 [60.6]
(4) [6.8]
(12) [20.4]
(20) [34.0]
(16) [27.2]
(8) [13.6]
2[7.6]
4[15.1]
6[22.7]
8[30.3]
10[37.9]
12[45.4]
14[53.0]
16 [60.6]
(4) [6.8](8) [13.6] (12) [20.4]
(16) [27.2]
(20) [34.0]
10[38]
20[76]
30[114]
40[151]
50[189]
(10) [17](20) [34]
(30) [51]
(40) [58]
(50) [85]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
(10) [17] (20) [34](30) [51]
(40) [68]
(50) [85]
N/A
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
15AO
DD P
UMPS
P2- 25mm (1”) Original Series Plastic Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 277 B 76 C 180 D 249 E 333 F 81 G 107 H 124 J 292 K 180 L 152 M 122 N 114 P 137 R 10
DIN S 84 DIA T 114 DIA U 15 DIA
ANSI S 79 DIA T 109 DIA U 15 DIA
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
02-6262 P2/PKPPP/BNS/BN/PBN/0400 Polypropylene Polypropylene Buna (Nitrile) 02-12277 P2/PKPPP/TWS/TF/PTV/0400 Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 02-6259 P2/KKPPP/WFS/WF/KWF/0400 PVDF (Kynar) Polypropylene Wilflex (Santoprene)
02-12484 P2/KKPPP/TWS/TF/KTV/0400 PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
P200- 25mm (1”) Advanced Series Plastic Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 457 B 66 C 259 D 381 E 434 F 99 G 104 H 122 J 259 K 231 L 353 M 310 N 124 P 157 R 10
DIN S 85 DIA T 1145 DIA U 14 DIA
ANSI S 79 DIA T 108 DIA U 16 DIA
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
02-10560 P200/PKPPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) 02-12239 P200/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 02-11269 P200/KKPPP/WFS/TF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene) 02-12238 P200/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
P2- 25mm (1”) Original Series Plastic Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 277 B 76 C 180 D 249 E 333 F 81 G 107 H 124 J 292 K 180 L 152 M 122 N 114 P 137 R 10
DIN S 84 DIA T 114 DIA U 15 DIA
ANSI S 79 DIA T 109 DIA U 15 DIA
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
02-6262 P2/PKPPP/BNS/BN/PBN/0400 Polypropylene Polypropylene Buna (Nitrile) 02-12277 P2/PKPPP/TWS/TF/PTV/0400 Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 02-6259 P2/KKPPP/WFS/WF/KWF/0400 PVDF (Kynar) Polypropylene Wilflex (Santoprene)
02-12484 P2/KKPPP/TWS/TF/KTV/0400 PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
P200- 25mm (1”) Advanced Series Plastic Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 457 B 66 C 259 D 381 E 434 F 99 G 104 H 122 J 259 K 231 L 353 M 310 N 124 P 157 R 10
DIN S 85 DIA T 1145 DIA U 14 DIA
ANSI S 79 DIA T 108 DIA U 16 DIA
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
02-10560 P200/PKPPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) 02-12239 P200/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 02-11269 P200/KKPPP/WFS/TF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene) 02-12238 P200/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
aoDD pumps1" PUMPS
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS02-6262 P2/PKPPP/BNS/BN/PBN/0400 Polypropylene Polypropylene Buna (Nitrile)
02-12277 P2/PKPPP/TWS/TF/PTV/0400 Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
02-6259 P2/KKPPP/WFS/WF/KWF/0400 PVDF (Kynar) Polypropylene Wilflex (Santoprene)
02-12484 P2/KKPPP/TWS/TF/KTV/0400 PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS02-10560 P200/PKPPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile)
02-12239 P200/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
02-11269 P200/KKPPP/WFS/TF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene)
02-12238 P200/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
itEmdimEnSion (mm)
A 277B 76C 180D 249E 333F 81G 107H 124J 292K 180L 152M 122N 114P 137R 10
DINS 84 DIAT 114 DIAU 15 DIA
ANSIS 79 DIAT 109 DIAU 15 DIA
itEmdimEnSion (mm)
A 457B 66C 259D 381E 434F 99G 104H 122J 259K 231L 353M 310N 124P 157R 10
DINS 85 DIAT 1145 DIAU 14 DIA
ANSIS 79 DIAT 108 DIAU 16 DIA
P2-25mm PLAStIC PUMP - Original Series
P200-25mm PLAStIC PUMP- Advanced Series
Models
Models
Dimensions
Dimensions
Performance Curves
Performance Curves
5[19]
10[38]
15[57]
20[76]
25[95]
30[114]
35[133]
40[151]
(20) [34] (30) [51]
(40) [68]
(10) [17]
5[19]
10[38]
15[57]
20[76]
25[95]
30[114]
35[133]
40[151]
(20) [34](30) [51]
(40) [68]
(10) [17]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[340]
(20) [34](30) [52]
(40) [68](50) [85]
(60) [102]
(10) [17]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[340]
(20) [34](30) [52]
(40) [68](50) [85]
(60) [102]
(10) [17]
RUBBER PTFE
RUBBER PTFE
RUBBER PTFE
5[19]
10[38]
15[57]
20[76]
25[95]
30[114]
35[133]
40[151]
(20) [34] (30) [51]
(40) [68]
(10) [17]
5[19]
10[38]
15[57]
20[76]
25[95]
30[114]
35[133]
40[151]
(20) [34](30) [51]
(40) [68]
(10) [17]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[340]
(20) [34](30) [52]
(40) [68](50) [85]
(60) [102]
(10) [17]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[340]
(20) [34](30) [52]
(40) [68](50) [85]
(60) [102]
(10) [17]
RUBBER PTFE
RUBBER PTFE
RUBBER PTFE
RUBBER
RUBBER
PTFE
PTFE
PTFE
2[7.6]
4[15.1]
6[22.7]
8[30.3]
10[37.9]
12[45.4]
14[53.0]
16 [60.6]
(4) [6.8]
(12) [20.4]
(20) [34.0]
(16) [27.2]
(8) [13.6]
2[7.6]
4[15.1]
6[22.7]
8[30.3]
10[37.9]
12[45.4]
14[53.0]
16 [60.6]
(4) [6.8](8) [13.6] (12) [20.4]
(16) [27.2]
(20) [34.0]
10[38]
20[76]
30[114]
40[151]
50[189]
(10) [17](20) [34]
(30) [51]
(40) [58]
(50) [85]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
(10) [17] (20) [34](30) [51]
(40) [68]
(50) [85]
RUBBER
RUBBER
PTFE
PTFE
PTFE
2[7.6]
4[15.1]
6[22.7]
8[30.3]
10[37.9]
12[45.4]
14[53.0]
16 [60.6]
(4) [6.8]
(12) [20.4]
(20) [34.0]
(16) [27.2]
(8) [13.6]
2[7.6]
4[15.1]
6[22.7]
8[30.3]
10[37.9]
12[45.4]
14[53.0]
16 [60.6]
(4) [6.8](8) [13.6] (12) [20.4]
(16) [27.2]
(20) [34.0]
10[38]
20[76]
30[114]
40[151]
50[189]
(10) [17](20) [34]
(30) [51]
(40) [58]
(50) [85]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
(10) [17] (20) [34](30) [51]
(40) [68]
(50) [85]
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
1616
P2- 25mm (1”) Original Series Metal Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 274 B 38 C 163 D 254 E 274 F 28 G 81 H 124 J 163 K 302 L 203 M 173 N 104 P 127 R 28 S 10
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
02-12272 P2/AAPPP/BNS/BN/ABN/2014 Aluminium Polypropylene Buna (Nitrile) 02-12281 P2/AAPPP/TWS/TF/PTV/2014 Aluminium Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 02-12459 P2/SSPPP/VTS/VT/STF/2014 Stainless Steel Polypropylene Viton 02-12450 P2/SSPPP/TWS/TF/KTV/2014 Stainless Steel Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
PX200- 25mm (1”) Advanced Series Metal Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 361 B 36 C 163 D 254 E 287 F 56 G 287 H 99 J 122 K 160 L 206 M 173 N 104 P 127 R 10
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
02-12002 XPX200/AAAAA/BNS/BN/ABN/0014 Aluminium Aluminium Buna (Nitrile) 02-12126 XPX200/AAAA/WFS/WF/AWF/0678 Aluminium Aluminium Wilflex (Santoprene) 02-12232 XPX200/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 02-11808 XPX200/SSAAA/EPS/EP/SEP/0678 Stainless Steel Aluminium EPDM (Nordel)
P2- 25mm (1”) Original Series Metal Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 274 B 38 C 163 D 254 E 274 F 28 G 81 H 124 J 163 K 302 L 203 M 173 N 104 P 127 R 28 S 10
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
02-12272 P2/AAPPP/BNS/BN/ABN/2014 Aluminium Polypropylene Buna (Nitrile) 02-12281 P2/AAPPP/TWS/TF/PTV/2014 Aluminium Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 02-12459 P2/SSPPP/VTS/VT/STF/2014 Stainless Steel Polypropylene Viton 02-12450 P2/SSPPP/TWS/TF/KTV/2014 Stainless Steel Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
PX200- 25mm (1”) Advanced Series Metal Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 361 B 36 C 163 D 254 E 287 F 56 G 287 H 99 J 122 K 160 L 206 M 173 N 104 P 127 R 10
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
02-12002 XPX200/AAAAA/BNS/BN/ABN/0014 Aluminium Aluminium Buna (Nitrile) 02-12126 XPX200/AAAA/WFS/WF/AWF/0678 Aluminium Aluminium Wilflex (Santoprene) 02-12232 XPX200/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 02-11808 XPX200/SSAAA/EPS/EP/SEP/0678 Stainless Steel Aluminium EPDM (Nordel)
aoDD pumps1" PUMPS
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS02-12272 P2/AAPPP/BNS/BN/ABN/2014 Aluminium Polypropylene Buna (Nitrile)
02-12281 P2/AAPPP/TWS/TF/PTV/2014 Aluminium Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
02-12459 P2/SSPPP/VTS/VT/STF/2014 Stainless Steel Polypropylene Viton
02-12450 P2/SSPPP/TWS/TF/KTV/2014 Stainless Steel Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS02-12002 XPX200/AAAAA/BNS/BN/ABN/0014 Aluminium Aluminium Buna (Nitrile)
02-12126 XPX200/AAAA/WFS/WF/AWF/0678 Aluminium Aluminium Wilflex (Santoprene)
02-12232 XPX200/SSAAA/TWS/TF/STF0014F Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up)
02-11808 XPX200/SSAAA/EPS/EP/SEP/0678 Stainless Steel Aluminium EPDM (Nordel)
itEmdimEnSion (mm)
A 274B 38C 163D 254E 274F 28G 81H 124J 163K 302L 203M 173N 104P 127R 28S 10
itEmdimEnSion (mm)
A 361B 36C 163D 254E 287F 56G 287H 99J 122K 160L 206M 173N 104P 127R 10
P2-25mm MetAL PUMP - Original Series
PX200-25mm MetAL PUMP- Advanced Series
Models
Models
Dimensions
Dimensions
Performance Curves Performance Curves
Performance Curves
RUBBER
RUBBER
RUBBER
RUBBER
PTFE
PTFE
PTFE
PTFE
WaterFlow Rates
8
7
6
5
4
3
2
1
0
300
200
250
150
100
50
0
120
100
80
60
40
20
0
(10) [17](20) [34]
(30) [52](40) [68]
(50) [85](60) [102]
GPM[LPM]
10[38]
30[114]
50[189]
70[265]
90[340]
BAR FEET PSIG
AIR CONSUMPTION(SCFM) [Nm3/h]
BAR FEET PSIG
8
7
6
5
4
3
2
1
0
300
200
250
150
100
50
0
120
100
80
60
40
20
0
(50) [85]
(30) [52](20) [34]
(10) [17]
(40) [68]
(60) [102]
WaterFlow Rates
GPM[LPM]
10[38]
30[114]
70[265]
50[189]
90[340]
AIR CONSUMPTION(SCFM) [Nm3/h]
RUBBER
RUBBER
RUBBER
RUBBER
PTFE
PTFE
PTFE
PTFE
WaterFlow Rates
8
7
6
5
4
3
2
1
0
300
200
250
150
100
50
0
120
100
80
60
40
20
0
(10) [17](20) [34]
(30) [52](40) [68]
(50) [85](60) [102]
GPM[LPM]
10[38]
30[114]
50[189]
70[265]
90[340]
BAR FEET PSIG
AIR CONSUMPTION(SCFM) [Nm3/h]
BAR FEET PSIG
8
7
6
5
4
3
2
1
0
300
200
250
150
100
50
0
120
100
80
60
40
20
0
(50) [85]
(30) [52](20) [34]
(10) [17]
(40) [68]
(60) [102]
WaterFlow Rates
GPM[LPM]
10[38]
30[114]
70[265]
50[189]
90[340]
AIR CONSUMPTION(SCFM) [Nm3/h]
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
17AO
DD P
UMPSPX4- 38mm (1 1/2”) Original Series Plastic Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 394 B 79 C 287 D 465 E 528 F 122 G 295 H 137 J 320 K 411 L 287 M 236 N 180 P 204 R 10
DIN S 109 DIA T 150 DIA U 18 DIA
ANSI S 99 DIA T 127 DIA U 15 DIA
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
04-12354 PX4/PPAPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) 04-12185 PX4/PPAPP/WFS/WF/PTV Polypropylene Polypropylene Wilflex (Santoprene) 04-12189 PX4/KKAPP/WFS/WF/KTV PVDF (Kynar) Polypropylene Wilflex (Santoprene) 04-12602 PX4/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
PX400- 38mm (1 1/2”) Advanced Series Plastic Pump detail
Dimensions
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
04-12753 PX400/PPPPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) 04-12822 PX400/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 04-12183 PX400/KKPPP/WFS/WF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene) 04-12604 PX400/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
ITEM DIMENSIONS (mm)
A 478 B 81 C 348 D 605 E 668 F 130 G 48 H 137 J 315 K 411 L 356 M 325 N 269 P 175 R 208 S 13
DIN T 110 DIA U 150 DIA V 18 DIA
ANSI T 97 DIA U 127 DIA V 15 DIA
PX4- 38mm (1 1/2”) Original Series Plastic Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 394 B 79 C 287 D 465 E 528 F 122 G 295 H 137 J 320 K 411 L 287 M 236 N 180 P 204 R 10
DIN S 109 DIA T 150 DIA U 18 DIA
ANSI S 99 DIA T 127 DIA U 15 DIA
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
04-12354 PX4/PPAPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) 04-12185 PX4/PPAPP/WFS/WF/PTV Polypropylene Polypropylene Wilflex (Santoprene) 04-12189 PX4/KKAPP/WFS/WF/KTV PVDF (Kynar) Polypropylene Wilflex (Santoprene) 04-12602 PX4/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
PX400- 38mm (1 1/2”) Advanced Series Plastic Pump detail
Dimensions
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
04-12753 PX400/PPPPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) 04-12822 PX400/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 04-12183 PX400/KKPPP/WFS/WF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene) 04-12604 PX400/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
ITEM DIMENSIONS (mm)
A 478 B 81 C 348 D 605 E 668 F 130 G 48 H 137 J 315 K 411 L 356 M 325 N 269 P 175 R 208 S 13
DIN T 110 DIA U 150 DIA V 18 DIA
ANSI T 97 DIA U 127 DIA V 15 DIA
aoDD pumps11/2" PUMPS
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS04-12354 PX4/PPAPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile)
04-12185 PX4/PPAPP/WFS/WF/PTV Polypropylene Polypropylene Wilflex (Santoprene)
04-12189 PX4/KKAPP/WFS/WF/KTV PVDF (Kynar) Polypropylene Wilflex (Santoprene)
04-12602 PX4/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS04-12753 PX400/PPPPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile)
04-12822 PX400/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
04-12183 PX400/KKPPP/WFS/WF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene)
04-12604 PX400/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
itEmdimEnSion (mm)
A 394B 79C 287D 465E 528F 122G 295H 137J 320K 411L 287M 236N 180P 204R 10
DINS 109 DIAT 150 DIAU 18 DIA
ANSIS 99 DIAT 127 DIAU 15 DIA
itEmdimEnSion (mm)
A 478B 81C 348D 605E 668F 130G 48H 137J 315K 411L 356M 325N 269P 175R 208S 13
DINT 110 DIAU 150 DIAV 18 DIA
ANSIT 97 DIAU 127 DIAV 15 DIA
PX4-38mm (11/2”) PLAStIC PUMP - Original Series
PX400-38mm (11/2”) PLAStIC PUMP- Advanced Series
Models
Models
Dimensions
Dimensions
Performance Curves
Performance Curves
5[19]
10[38]
15[57]
20[76]
25[95]
30[114]
35[133]
40[151]
(20) [34] (30) [51]
(40) [68]
(10) [17]
5[19]
10[38]
15[57]
20[76]
25[95]
30[114]
35[133]
40[151]
(20) [34](30) [51]
(40) [68]
(10) [17]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[340]
(20) [34](30) [52]
(40) [68](50) [85]
(60) [102]
(10) [17]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[340]
(20) [34](30) [52]
(40) [68](50) [85]
(60) [102]
(10) [17]
RUBBER PTFE
RUBBER PTFE
RUBBER PTFE
5[19]
10[38]
15[57]
20[76]
25[95]
30[114]
35[133]
40[151]
(20) [34] (30) [51]
(40) [68]
(10) [17]
5[19]
10[38]
15[57]
20[76]
25[95]
30[114]
35[133]
40[151]
(20) [34](30) [51]
(40) [68]
(10) [17]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[340]
(20) [34](30) [52]
(40) [68](50) [85]
(60) [102]
(10) [17]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[340]
(20) [34](30) [52]
(40) [68](50) [85]
(60) [102]
(10) [17]
RUBBER PTFE
RUBBER PTFE
RUBBER PTFE
RUBBER
RUBBER
RUBBER
RUBBER
PTFE
PTFE
PTFE
PTFE
20[76]
60[227]
100[379]
140[530]
180[681]
(25) [43](50) [85]
(75) [128]
(100) [170]
(125) [213]
20[76]
60[227]
100[379]
140[530]
180[681]
(25) [43](50) [85]
(75) [128]
(100) [170]
(125) [213]
20[76]
60[227]
100[379]
140[530]
180[681]
(25) [43](50) [85]
(75) [128]
(100) [170]
(125) [213]
20[76]
60[227]
100[379]
140[530]
180[681]
(25) [43](50) [85]
(75) [128]
(100) [170]
(125) [213]
20[76]
40[151]
60[227]
80[303]
100[379]
120[454]
(20) [34](40) [88]
(80) [102](80) [136]
(100) [170]
20[76]
40[151]
60[227]
80[303]
100[379]
120[454]
(20) [34] (40) [88](80) [102]
(80) [136]
(100) [170]
RUBBER
RUBBER
RUBBER
RUBBER
PTFE
PTFE
PTFE
PTFE
20[76]
60[227]
100[379]
140[530]
180[681]
(25) [43](50) [85]
(75) [128]
(100) [170]
(125) [213]
20[76]
60[227]
100[379]
140[530]
180[681]
(25) [43](50) [85]
(75) [128]
(100) [170]
(125) [213]
20[76]
60[227]
100[379]
140[530]
180[681]
(25) [43](50) [85]
(75) [128]
(100) [170]
(125) [213]
20[76]
60[227]
100[379]
140[530]
180[681]
(25) [43](50) [85]
(75) [128]
(100) [170]
(125) [213]
20[76]
40[151]
60[227]
80[303]
100[379]
120[454]
(20) [34](40) [88]
(80) [102](80) [136]
(100) [170]
20[76]
40[151]
60[227]
80[303]
100[379]
120[454]
(20) [34] (40) [88](80) [102]
(80) [136]
(100) [170]
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
1818
PX4- 38mm (1 1/2”) Original Series Metal Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 368 B 64 C 206 D 429 E 147 F 308 G 211 H 262 J 224 K 152 L 178 M 51 N 10 P 335 R 224 S 135 T 196 U 48 V 13
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
04-12275 XPX4/AAAAA/BNS/BN/ABN/0014 Aluminium Aluminium Buna (Nitrile) 04-12446 XPX4/AAAAA/VTS/VT/VT/0014 Aluminium Aluminium Viton 04-12453 XPX4/WMAAA/EPS/EP/EP/0014 Cast Iron Aluminium EPDM (Nordel) 04-12594 XPX4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up)
PX400- 38mm (1 1/2”) Advanced Series Metal Pump detail
Dimensions
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
04-12287 XPX400/AAAAA/BNS/BN/ABN Aluminium Aluminium Buna (Nitrile) 04-12472 XPX400/AAAA/EPS/EP/EP Aluminium Aluminium EPDM (Nordel) 04-12597 XPX400/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 04-12687 XPX400/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton
ITEM DIMENSIONS (mm)
A 343 B 79 C 320 D 531 E 594 F 122 G 81 H 312 J 292 K 244 L 206 M 152 N 170 P 10
DIN R 110 DIA S 150 DIA T 18 DIA
ANSI R 98 DIA S 127 DIA T 16 DIA
PX4- 38mm (1 1/2”) Original Series Metal Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 368 B 64 C 206 D 429 E 147 F 308 G 211 H 262 J 224 K 152 L 178 M 51 N 10 P 335 R 224 S 135 T 196 U 48 V 13
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
04-12275 XPX4/AAAAA/BNS/BN/ABN/0014 Aluminium Aluminium Buna (Nitrile) 04-12446 XPX4/AAAAA/VTS/VT/VT/0014 Aluminium Aluminium Viton 04-12453 XPX4/WMAAA/EPS/EP/EP/0014 Cast Iron Aluminium EPDM (Nordel) 04-12594 XPX4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up)
PX400- 38mm (1 1/2”) Advanced Series Metal Pump detail
Dimensions
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
04-12287 XPX400/AAAAA/BNS/BN/ABN Aluminium Aluminium Buna (Nitrile) 04-12472 XPX400/AAAA/EPS/EP/EP Aluminium Aluminium EPDM (Nordel) 04-12597 XPX400/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 04-12687 XPX400/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton
ITEM DIMENSIONS (mm)
A 343 B 79 C 320 D 531 E 594 F 122 G 81 H 312 J 292 K 244 L 206 M 152 N 170 P 10
DIN R 110 DIA S 150 DIA T 18 DIA
ANSI R 98 DIA S 127 DIA T 16 DIA
aoDD pumps11/2" PUMPS
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS04-12275 XPX4/AAAAA/BNS/BN/ABN/0014 Aluminium Aluminium Buna (Nitrile)
04-12446 XPX4/AAAAA/VTS/VT/VT/0014 Aluminium Aluminium Viton
04-12453 XPX4/WMAAA/EPS/EP/EP/0014 Cast Iron Aluminium EPDM (Nordel)
04-12594 XPX4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up)
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS04-12287 XPX400/AAAAA/BNS/BN/ABN Aluminium Aluminium Buna (Nitrile)
04-12472 XPX400/AAAA/EPS/EP/EP Aluminium Aluminium EPDM (Nordel)
04-12597 XPX400/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up)
04-12687 XPX400/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton
itEmdimEnSion (mm)
A 368B 64C 206D 429E 147F 308G 211H 262J 224K 152L 178M 51N 10P 335R 224S 135T 196U 48V 13
itEmdimEnSion (mm)
A 343B 79C 320D 531E 594F 122G 81H 312J 292K 244L 206M 152N 170P 10
DINR 110 DIAS 150 DIAT 18 DIA
ANSIR 98 DIAS 127 DIAT 16 DIA
PX4-38mm (11/2”) MetAL PUMP - Original Series
PX400-38mm (11/2”) MetAL PUMP- Advanced Series
Models
Models
Dimensions
Dimensions
Performance Curves
Performance Curves
60 [102]
80 [136]
40 [68]
20 [34]
60 [102]
80 [136]
40 [68]
20 [34]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[340]
(20) [34](30) [52]
(40) [68](50) [85]
(60) [102]
(10) [17]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[340]
(20) [34](30) [52]
(40) [68](50) [85]
(60) [102]
(10) [17]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[341]
(40) [68]
(60) [102]
(80) [136]
(100) [170]
(20) [34]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[341]
(40) [68](60) [102]
(80) [136]
(100) [170]
(20) [34]
5[19]
10[38]
15[57]
20[76]
25[95]
30[114]
35[133]
(20) [34]
(5) [8.5]
(15) [25.5]
(25) [42.5]
(10) [17]
5[19]
10[38]
15[57]
20[76]
25[95]
30[114]
35[133]
(20) [34]
(5) [8.5]
(15) [25.5]
(25) [42.5]
(10) [17]
RUBBER PTFE
RUBBER PTFE
RUBBER PTFE
RUBBER PTFE
60 [102]
80 [136]
40 [68]
20 [34]
60 [102]
80 [136]
40 [68]
20 [34]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[340]
(20) [34](30) [52]
(40) [68](50) [85]
(60) [102]
(10) [17]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[340]
(20) [34](30) [52]
(40) [68](50) [85]
(60) [102]
(10) [17]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[341]
(40) [68]
(60) [102]
(80) [136]
(100) [170]
(20) [34]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[341]
(40) [68](60) [102]
(80) [136]
(100) [170]
(20) [34]
5[19]
10[38]
15[57]
20[76]
25[95]
30[114]
35[133]
(20) [34]
(5) [8.5]
(15) [25.5]
(25) [42.5]
(10) [17]
5[19]
10[38]
15[57]
20[76]
25[95]
30[114]
35[133]
(20) [34]
(5) [8.5]
(15) [25.5]
(25) [42.5]
(10) [17]
RUBBER PTFE
RUBBER PTFE
RUBBER PTFE
RUBBER PTFE
13
RUBBER
RUBBER
RUBBER
PTFE
PTFE
PTFE
60 [102]
100 [170]
80 [136]
40 [68]20 [34]
60 [102]
100 [170]
80 [136]
40 [68]
20 [34]
RUBBER PTFE
13
RUBBER
RUBBER
RUBBER
PTFE
PTFE
PTFE
60 [102]
100 [170]
80 [136]
40 [68]20 [34]
60 [102]
100 [170]
80 [136]
40 [68]
20 [34]
RUBBER PTFE
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
19AO
DD P
UMPS
PX8- 50mm (2”) Original Series Plastic Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 490 B 76 C 414 D 693 E 770 F 89 G 417 H 333 J 381 K 307 L 227 M 254 N 15
DIN/ ANSI COMBO P 122 DIA R 155 DIA S 20 DIA
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
08-13820 PX4/PPAPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) 08-14099 PX4/PPAPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 08-13271 P8/KKAPP/VTU/TF/KTV PVDF (Kynar) Polypropylene Viton (Ultra flex)
PX800- 50mm (2”) Advanced Series Plastic Pump detail
Dimensions
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
08-13629 PX800/PKPPP/WFS/WF/PWF Polypropylene Polypropylene Wilflex (Santoprene) 08-14101 PX800/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 08-14355 PX800/KKPPP/WFS/WF/KWF PVDF (Kynar) Polypropylene EPDM (Nordel) 08-14100 PX800/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
ITEM DIMENSIONS (mm)
A 605 B 150 C 729 D 91 E 406 F 805 G 48 H 178 J 356 K 452 L 414 M 424 N 361 P 208 R 234 S 15
DIN T 125 DIA U 165 DIA V 18 DIA
ANSI T 122 DIA U 154 DIA V 20 DIA
20[76]
40[151]
60[227]
80[303]
100[378]
120[454]
140[530]
160[606]
(40) [68](60) [102]
(80) [136]
(100) [170]
(120) [204]
(20) [34]
20[76]
40[151]
60[227]
80[303]
100[378]
120[454]
140[530]
160[606]
(40) [68]
(60) [102]
(80) [136](100) [170]
(120) [204]
(20) [34]
RUBBER PTFE
RUBBER PTFE
20[76]
40[151]
60[227]
80[303]
100[378]
120[454]
140[530]
160[606]
(40) [68](60) [102]
(80) [136]
(100) [170]
(120) [204]
(20) [34]
20[76]
40[151]
60[227]
80[303]
100[378]
120[454]
140[530]
160[606]
(40) [68]
(60) [102]
(80) [136](100) [170]
(120) [204]
(20) [34]
RUBBER PTFE
RUBBER PTFE
PX8- 50mm (2”) Original Series Plastic Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 490 B 76 C 414 D 693 E 770 F 89 G 417 H 333 J 381 K 307 L 227 M 254 N 15
DIN/ ANSI COMBO P 122 DIA R 155 DIA S 20 DIA
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
08-13820 PX4/PPAPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) 08-14099 PX4/PPAPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 08-13271 P8/KKAPP/VTU/TF/KTV PVDF (Kynar) Polypropylene Viton (Ultra flex)
PX800- 50mm (2”) Advanced Series Plastic Pump detail
Dimensions
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
08-13629 PX800/PKPPP/WFS/WF/PWF Polypropylene Polypropylene Wilflex (Santoprene) 08-14101 PX800/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 08-14355 PX800/KKPPP/WFS/WF/KWF PVDF (Kynar) Polypropylene EPDM (Nordel) 08-14100 PX800/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
ITEM DIMENSIONS (mm)
A 605 B 150 C 729 D 91 E 406 F 805 G 48 H 178 J 356 K 452 L 414 M 424 N 361 P 208 R 234 S 15
DIN T 125 DIA U 165 DIA V 18 DIA
ANSI T 122 DIA U 154 DIA V 20 DIA
aoDD pumps2" PUMPS
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS08-13820 PX4/PPAPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile)
08-14099 PX4/PPAPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
08-13271 P8/KKAPP/VTU/TF/KTV PVDF (Kynar) Polypropylene Viton (Ultra flex)
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS08-13629 PX800/PKPPP/WFS/WF/PWF Polypropylene Polypropylene Wilflex (Santoprene)
08-14101 PX800/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
08-14355 PX800/KKPPP/WFS/WF/KWF PVDF (Kynar) Polypropylene EPDM (Nordel)
08-14100 PX800/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
itEmdimEnSion (mm)
A 490B 76C 414D 693E 770F 89G 417H 333J 381K 307L 227M 254N 15DIN/ ANSI COMBOP 122 DIAR 155 DIAS 20 DIA
itEmdimEnSion (mm)
A 605B 150C 729D 91E 406F 805G 48H 178J 356K 452L 414M 424N 361P 208R 234S 15
DINT 125 DIAU 165 DIAV 18 DIA
ANSIT 122 DIAU 154 DIAV 20 DIA
PX8-50mm (2”) PLAStIC PUMP - Original Series
PX800-50mm (2”) PLAStIC PUMP- Advanced Series
Models
Models
Dimensions
Dimensions
Performance Curves
Performance CurvesRUBBER PTFE
PTFE
60 [102]
80 [136]
100 [170]
40 [68]
20 [34]
60 [102]
80 [136]
100 [170]
40 [68]20 [34]
8
7
6
5
4
3
2
1
0
300
200
250
150
100
50
0
120
100
80
60
40
20
0
(50) [85](75) [128](100) [170](125) [213]
(25) [42]
20[76]
60[227]
100[379]
140[530]
180[681]
220[833]
AIR CONSUMPTION(SCFM) [Nm3/h]
RUBBER PTFE
PTFE
60 [102]
80 [136]
100 [170]
40 [68]
20 [34]
60 [102]
80 [136]
100 [170]
40 [68]20 [34]
8
7
6
5
4
3
2
1
0
300
200
250
150
100
50
0
120
100
80
60
40
20
0
(50) [85](75) [128](100) [170](125) [213]
(25) [42]
20[76]
60[227]
100[379]
140[530]
180[681]
220[833]
AIR CONSUMPTION(SCFM) [Nm3/h]
PX8- 50mm (2”) Original Series Plastic Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 490 B 76 C 414 D 693 E 770 F 89 G 417 H 333 J 381 K 307 L 227 M 254 N 15
DIN/ ANSI COMBO P 122 DIA R 155 DIA S 20 DIA
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
08-13820 PX4/PPAPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) 08-14099 PX4/PPAPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 08-13271 P8/KKAPP/VTU/TF/KTV PVDF (Kynar) Polypropylene Viton (Ultra flex)
PX800- 50mm (2”) Advanced Series Plastic Pump detail
Dimensions
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
08-13629 PX800/PKPPP/WFS/WF/PWF Polypropylene Polypropylene Wilflex (Santoprene) 08-14101 PX800/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 08-14355 PX800/KKPPP/WFS/WF/KWF PVDF (Kynar) Polypropylene EPDM (Nordel) 08-14100 PX800/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
ITEM DIMENSIONS (mm)
A 605 B 150 C 729 D 91 E 406 F 805 G 48 H 178 J 356 K 452 L 414 M 424 N 361 P 208 R 234 S 15
DIN T 125 DIA U 165 DIA V 18 DIA
ANSI T 122 DIA U 154 DIA V 20 DIA
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
2020
PX8- 50mm (2”) Original Series Metal Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 404 B 48 C 356 D 630 E 668 F 58 G 61 H 348 J 343 K 229 L 254 M 257 N 312 P 15 R 64 S 51 T 282 U 71 V 279 W 386 X 15 DIA
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
08-13725 XPX8/AAAAA/NES/NE/NE/0014 Aluminium Aluminium Neoprene 08-13825 XPX8/AAAAA/VTS/VT/VT/0014 Aluminium Aluminium Viton 08-13837 XPX8/WWAAA/BNS/BN/BN/0014 Cast Iron Aluminium Buna (Nitrile) 08-14211 XPX8/SSSSS/FSS/FS/FS/0014 Stainless Steel Stainless Steel Saniflex (Hytrel Food grade)
PX800- 50mm (2”) Advanced Series Metal Pump detail
Dimensions
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
08-13775 XPX800/AAAAA/BNS/BN/ABN Aluminium Aluminium Buna (Nitrile) 08-14092 XPX800/AAAA/TWS/TF/STF Aluminium Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 08-14093 XPX800/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 08-13756 XPX800/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton
ITEM DIMENSIONS (mm)
A 439 B 89 C 396 D 676 E 760 F 94 G 117 H 325 J 493 K 396 L 330 M 254 N 325 P 379 R 15
DIN/ ANSI COMBO S 165 DIA T 122 DIA U 20 DIA
PX8- 50mm (2”) Original Series Metal Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 404 B 48 C 356 D 630 E 668 F 58 G 61 H 348 J 343 K 229 L 254 M 257 N 312 P 15 R 64 S 51 T 282 U 71 V 279 W 386 X 15 DIA
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
08-13725 XPX8/AAAAA/NES/NE/NE/0014 Aluminium Aluminium Neoprene 08-13825 XPX8/AAAAA/VTS/VT/VT/0014 Aluminium Aluminium Viton 08-13837 XPX8/WWAAA/BNS/BN/BN/0014 Cast Iron Aluminium Buna (Nitrile) 08-14211 XPX8/SSSSS/FSS/FS/FS/0014 Stainless Steel Stainless Steel Saniflex (Hytrel Food grade)
PX800- 50mm (2”) Advanced Series Metal Pump detail
Dimensions
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
08-13775 XPX800/AAAAA/BNS/BN/ABN Aluminium Aluminium Buna (Nitrile) 08-14092 XPX800/AAAA/TWS/TF/STF Aluminium Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 08-14093 XPX800/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 08-13756 XPX800/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton
ITEM DIMENSIONS (mm)
A 439 B 89 C 396 D 676 E 760 F 94 G 117 H 325 J 493 K 396 L 330 M 254 N 325 P 379 R 15
DIN/ ANSI COMBO S 165 DIA T 122 DIA U 20 DIA
aoDD pumps2" PUMPS
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS08-13725 XPX8/AAAAA/NES/NE/NE/0014 Aluminium Aluminium Neoprene
08-13825 XPX8/AAAAA/VTS/VT/VT/0014 Aluminium Aluminium Viton
08-13837 XPX8/WWAAA/BNS/BN/BN/0014 Cast Iron Aluminium Buna (Nitrile)
08-14211 XPX8/SSSSS/FSS/FS/FS/0014 Stainless Steel Stainless Steel Saniflex (Hytrel Food grade)
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS08-13775 XPX800/AAAAA/BNS/BN/ABN Aluminium Aluminium Buna (Nitrile)
08-14092 XPX800/AAAA/TWS/TF/STF Aluminium Aluminium PTFE (Full flow with Wilflex/ Santoprene back up)
08-14093 XPX800/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up)
08-13756 XPX800/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton
itEmdimEnSion (mm)
A 404B 48C 356D 630E 668F 58G 61H 348J 343K 229L 254M 257N 312P 15R 64S 51T 282U 71V 279W 386X 15 DIA
itEmdimEnSion (mm)
A 439B 89C 396D 676E 760F 94G 117H 325J 493K 396L 330M 254N 325P 379R 15DIN/ ANSI COMBOS 165 DIAT 122 DIAU 20 DIA
PX8-50mm (2”) MetAL PUMP - Original Series
PX800- 50mm (2”) MetAL PUMP- Advanced Series
Models
Models
Dimensions
Dimensions
Performance Curves
Performance Curves
(20) [34](40) [68]
(60) [102]
(100) [170]
(120) [204]
(80) [136]
60 [102]
80 [136]
100 [170]
40 [68]20 [34]
60 [102]80 [136]
100 [170]
40 [68]20 [34]
RUBBER
RUBBER
RUBBER
RUBBER
PTFE
PTFE
PTFE
PTFE
(20) [34](40) [68]
(60) [102]
(100) [170]
(120) [204]
(80) [136]
60 [102]
80 [136]
100 [170]
40 [68]20 [34]
60 [102]80 [136]
100 [170]
40 [68]20 [34]
RUBBER
RUBBER
RUBBER
RUBBER
PTFE
PTFE
PTFE
PTFE
20[76]
40[151]
60[227]
80[303]
100[378]
120[454]
140[530]
160[606]
(40) [68](60) [102]
(80) [136]
(100) [170]
(20) [34]
20[76]
40[151]
60[227]
80[303]
100[378]
120[454]
140[530]
160[606]
(40) [68]
(60) [102]
(80) [136]
(100) [170]
(120) [204]
(20) [34]
20[76]
40[151]
60[227]
80[303]
100[379]
120[454]
140[530]
160[606]
180[681]
(40) [68](60) [102]
(80) [136]
(100) [170]
(20) [34]
20[76]
40[151]
60[227]
80[303]
100[379]
120[454]
140[530]
160[606]
180[681]
(40) [68](60) [102]
(80) [136](100) [170]
(20) [34]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[340]
(20) [34]
(30) [52](40) [68]
(50) [85]
(60) [102]
(10) [17]
RUBBER
RUBBER PTFE
RUBBER PTFE
RUBBER PTFE
20[76]
40[151]
60[227]
80[303]
100[379]
120[454]
140[530]
160[606]
180[681]
200[681]
20[76]
40[151]
60[227]
80[303]
100[379]
120[454]
140[530]
160[606]
180[681]
200[681]
20[76]
40[151]
60[227]
80[303]
100[378]
120[454]
140[530]
160[606]
(40) [68](60) [102]
(80) [136]
(100) [170]
(20) [34]
20[76]
40[151]
60[227]
80[303]
100[378]
120[454]
140[530]
160[606]
(40) [68]
(60) [102]
(80) [136]
(100) [170]
(120) [204]
(20) [34]
20[76]
40[151]
60[227]
80[303]
100[379]
120[454]
140[530]
160[606]
180[681]
(40) [68](60) [102]
(80) [136]
(100) [170]
(20) [34]
20[76]
40[151]
60[227]
80[303]
100[379]
120[454]
140[530]
160[606]
180[681]
(40) [68](60) [102]
(80) [136](100) [170]
(20) [34]
10[38]
20[76]
30[114]
40[151]
50[189]
60[227]
70[265]
80[303]
90[340]
(20) [34]
(30) [52](40) [68]
(50) [85]
(60) [102]
(10) [17]
RUBBER
RUBBER PTFE
RUBBER PTFE
RUBBER PTFE
20[76]
40[151]
60[227]
80[303]
100[379]
120[454]
140[530]
160[606]
180[681]
200[681]
20[76]
40[151]
60[227]
80[303]
100[379]
120[454]
140[530]
160[606]
180[681]
200[681]
PX8- 50mm (2”) Original Series Metal Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 404 B 48 C 356 D 630 E 668 F 58 G 61 H 348 J 343 K 229 L 254 M 257 N 312 P 15 R 64 S 51 T 282 U 71 V 279 W 386 X 15 DIA
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
08-13725 XPX8/AAAAA/NES/NE/NE/0014 Aluminium Aluminium Neoprene 08-13825 XPX8/AAAAA/VTS/VT/VT/0014 Aluminium Aluminium Viton 08-13837 XPX8/WWAAA/BNS/BN/BN/0014 Cast Iron Aluminium Buna (Nitrile) 08-14211 XPX8/SSSSS/FSS/FS/FS/0014 Stainless Steel Stainless Steel Saniflex (Hytrel Food grade)
PX800- 50mm (2”) Advanced Series Metal Pump detail
Dimensions
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
08-13775 XPX800/AAAAA/BNS/BN/ABN Aluminium Aluminium Buna (Nitrile) 08-14092 XPX800/AAAA/TWS/TF/STF Aluminium Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 08-14093 XPX800/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 08-13756 XPX800/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton
ITEM DIMENSIONS (mm)
A 439 B 89 C 396 D 676 E 760 F 94 G 117 H 325 J 493 K 396 L 330 M 254 N 325 P 379 R 15
DIN/ ANSI COMBO S 165 DIA T 122 DIA U 20 DIA
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
21AO
DD P
UMPS
P1500- 76mm (3”) Advanced Series Plastic Pump detail
Dimensions
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
15-11462 PX1500/PSPPP/WFS/TF/KTV Polypropylene Polypropylene Wilflex (Santoprene) 15-12183 PX1500/PSPPP/TWS/TF/KTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
ITEM DIMENSIONS (mm)
A 914 B 160 C 691 D 1279 E 303 F 181 G 12 H 693 J 181 K 584 L 681 M 336 N 14 DIA P 149
ANSI R 122 DIA S 154 DIA T 20 DIA
aoDD pumps3" PUMPS
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS15-11462 PX1500/PSPPP/WFS/TF/KTV Polypropylene Polypropylene Wilflex (Santoprene)
15-12183 PX1500/PSPPP/TWS/TF/KTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
itEmdimEnSion (mm)
A 914B 160C 691D 1279E 303F 181G 12H 693J 181K 584L 681M 336N 14 DIAP 149
ANSIR 122 DIAS 154 DIAT 20 DIA
P1500-76mm (3”) PLAStIC PUMP- Advanced Series
Models
Dimensions Performance Curve
P1500- 76mm (3”) Advanced Series Plastic Pump detail
Dimensions
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
15-11462 PX1500/PSPPP/WFS/TF/KTV Polypropylene Polypropylene Wilflex (Santoprene) 15-12183 PX1500/PSPPP/TWS/TF/KTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)
ITEM DIMENSIONS (mm)
A 914 B 160 C 691 D 1279 E 303 F 181 G 12 H 693 J 181 K 584 L 681 M 336 N 14 DIA P 149
ANSI R 122 DIA S 154 DIA T 20 DIA
RUBBER PTFE
PTFE
60 [102]
80 [136]
100 [170]
40 [68]
20 [34]
60 [102]
80 [136]
100 [170]
40 [68]20 [34]
8
7
6
5
4
3
2
1
0
300
200
250
150
100
50
0
120
100
80
60
40
20
0
(50) [85](75) [128](100) [170](125) [213]
(25) [42]
20[76]
60[227]
100[379]
140[530]
180[681]
220[833]
AIR CONSUMPTION(SCFM) [Nm3/h]
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
2222
PX15- 76mm (3”) Original Series Metal Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 505 B 58 C 386 D 762 E 823 F 71 G 84 H 389 J 48 K 216 L 427 M 599 N 363 P 307 R 257 S 282 T 18 U 71 V 69 W 307 X 84 Y 305 Z 478
AA 15 DIA
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
15-11800 XPX15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile) 15-12014 XPX15/AAAAA/TWS/TF/ATF/0014 Aluminium Aluminium PTFE (Full flow with Wilflex Santoprene back up) 15-11838 XPX15/WWAAA/WFS/WF/WF/0014 Cast Iron Aluminium Wilflex (Santoprene) 15-11853 XPX15/SSAAA/FSS/FS/FS/0070 Stainless Steel Aluminium Saniflex (Hytrel Food grade)
PX1500- 76mm (3”) Advanced Series Metal Pump detail
Dimensions
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
15-11801 XPX1500/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene) 15-12109 XPX1500/AAAA/TWS/TF/STF Aluminium Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 15-11846 XPX1500/SSAAA/TNU/TF/STF Stainless Steel Aluminium PTFE (Full flow with Neoprene back up) 15-11975 XPX1500/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton
ITEM DIMENSIONS (mm)
A 615 B 127 C 533 D 934 E 1031 F 165 G 536 H 48 J 211 K 422 L 597 M 363 N 307 P 259 R 282 S 18
DIN T 200 DIA U 160 DIA V 18 DIA
aoDD pumps3" PUMPS
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS15-11800 XPX15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
15-12014 XPX15/AAAAA/TWS/TF/ATF/0014 Aluminium Aluminium PTFE (Full flow with Wilflex Santoprene back up)
15-11838 XPX15/WWAAA/WFS/WF/WF/0014 Cast Iron Aluminium Wilflex (Santoprene)
15-11853 XPX15/SSAAA/FSS/FS/FS/0070 Stainless Steel Aluminium Saniflex (Hytrel Food grade)
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS15-11801 XPX1500/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
15-12109 XPX1500/AAAA/TWS/TF/STF Aluminium Aluminium PTFE (Full flow with Wilflex/ Santoprene back up)
15-11846 XPX1500/SSAAA/TNU/TF/STF Stainless Steel Aluminium PTFE (Full flow with Neoprene back up)
15-11975 XPX1500/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton
itEmdimEnSion (mm)
A 505B 58C 386D 762E 823F 71G 84H 389J 48K 216L 427M 599N 363P 307R 257S 282T 18U 71V 69W 307X 84Y 305Z 478AA 15 DIA
itEmdimEnSion (mm)
A 615B 127C 533D 934E 1031F 165G 536H 48J 211K 422L 597M 363N 307P 259R 282S 18
DINT 200 DIAU 160 DIAV 18 DIA
PX15-76mm (3”) MetAL PUMP - Original Series
PX1500-76mm (3") MetAL PUMP- Advanced Series
Models
Models
Dimensions
Dimensions
Performance Curves
Performance Curves
15
RUBBER
RUBBER
RUBBER
PTFE
PTFE
PTFE
RUBBER PTFE
20[76]
40[151]
80[303]
120[454]
160[606]
220[833]
200[757]
60[227]
100[379]
140[530]
180[681]
240[908]
260[984]
(60) [102](90) [153]
(120) [204]
(30) [51]
20[76]
40[151]
80[303]
120[454]
160[606]
220[833]
200[757]
60[227]
100[379]
140[530]
180[681]
240[908]
260[984]
(60) [102]
(90) [153]
(120) [204]
(30) [51]
15
RUBBER
RUBBER
RUBBER
PTFE
PTFE
PTFE
RUBBER PTFE
20[76]
40[151]
80[303]
120[454]
160[606]
220[833]
200[757]
60[227]
100[379]
140[530]
180[681]
240[908]
260[984]
(60) [102](90) [153]
(120) [204]
(30) [51]
20[76]
40[151]
80[303]
120[454]
160[606]
220[833]
200[757]
60[227]
100[379]
140[530]
180[681]
240[908]
260[984]
(60) [102]
(90) [153]
(120) [204]
(30) [51]
15
40[151]
80[303]
120[454]
160[606]
200[757]
240[908]
(60) [102](90) [153]
(120) [204](150) [255]
(30) [51]
40[151]
80[303]
120[454]
160[606]
200[757]
240[908]
(60) [102](90) [153]
(120) [204](150) [255]
(30) [51]
20[76]
40[151]
60[227]
80[303]
100[378]
120[454]
140[530]
160[606]
(40) [68]
(60) [102]
(80) [136]
(100) [170]
(20) [34]
RUBBER
RUBBER PTFE
RUBBER PTFE
20[76]
40[151]
80[303]
120[454]
160[606]
220[833]
200[757]
60[227]
100[379]
140[530]
180[681]
240[908]
(60) [102]
(90) [153]
(120) [204]
(30) [51]
20[76]
40[151]
80[303]
120[454]
160[606]
220[833]
200[757]
60[227]
100[379]
140[530]
180[681]
240[908]
(60) [102](90) [153]
(120) [204]
(30) [51]
15
40[151]
80[303]
120[454]
160[606]
200[757]
240[908]
(60) [102](90) [153]
(120) [204](150) [255]
(30) [51]
40[151]
80[303]
120[454]
160[606]
200[757]
240[908]
(60) [102](90) [153]
(120) [204](150) [255]
(30) [51]
20[76]
40[151]
60[227]
80[303]
100[378]
120[454]
140[530]
160[606]
(40) [68]
(60) [102]
(80) [136]
(100) [170]
(20) [34]
RUBBER
RUBBER PTFE
RUBBER PTFE
20[76]
40[151]
80[303]
120[454]
160[606]
220[833]
200[757]
60[227]
100[379]
140[530]
180[681]
240[908]
(60) [102]
(90) [153]
(120) [204]
(30) [51]
20[76]
40[151]
80[303]
120[454]
160[606]
220[833]
200[757]
60[227]
100[379]
140[530]
180[681]
240[908]
(60) [102](90) [153]
(120) [204]
(30) [51]
PX15- 76mm (3”) Original Series Metal Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 505 B 58 C 386 D 762 E 823 F 71 G 84 H 389 J 48 K 216 L 427 M 599 N 363 P 307 R 257 S 282 T 18 U 71 V 69 W 307 X 84 Y 305 Z 478
AA 15 DIA
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
15-11800 XPX15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile) 15-12014 XPX15/AAAAA/TWS/TF/ATF/0014 Aluminium Aluminium PTFE (Full flow with Wilflex Santoprene back up) 15-11838 XPX15/WWAAA/WFS/WF/WF/0014 Cast Iron Aluminium Wilflex (Santoprene) 15-11853 XPX15/SSAAA/FSS/FS/FS/0070 Stainless Steel Aluminium Saniflex (Hytrel Food grade)
PX1500- 76mm (3”) Advanced Series Metal Pump detail
Dimensions
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
15-11801 XPX1500/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene) 15-12109 XPX1500/AAAA/TWS/TF/STF Aluminium Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 15-11846 XPX1500/SSAAA/TNU/TF/STF Stainless Steel Aluminium PTFE (Full flow with Neoprene back up) 15-11975 XPX1500/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton
ITEM DIMENSIONS (mm)
A 615 B 127 C 533 D 934 E 1031 F 165 G 536 H 48 J 211 K 422 L 597 M 363 N 307 P 259 R 282 S 18
DIN T 200 DIA U 160 DIA V 18 DIA
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
23AO
DD P
UMPS
PX20- 100mm (4”) Original Series Metal Pump detail
Dimensions
ITEM DIMENSIONS (mm)
A 950 B 119 C 419 D 681 E 826 F 48 G 424 H 213 J 170 K 424 L 597 M 455 N 376 P 279 R 333
ANSI COMBO S 15 DIA T 231 DIA U 191 DIA
MODELS
MODEL NUMBER DESIGNATION WETTED CONSTRUCTION
NON-WETTED CONSTRUCTION ELASTOMERS
20-10055 PX20/WWAAA/NEU/PU/VVT Cast Iron Aluminium Neoprene (Ultra flex) 20-10063 XPX20/WWAAA/BNS/PU/PEP Cast Iron Aluminium Buna (Nitrile)
Optional Configurations
aoDD pumps4" PUMPS
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS20-10055 PX20/WWAAA/NEU/PU/VVT Cast Iron Aluminium Neoprene (Ultra flex)
20-10063 XPX20/WWAAA/BNS/PU/PEP Cast Iron Aluminium Buna (Nitrile)
itEmdimEnSion (mm)
A 950B 119C 419D 681E 826F 48G 424H 213J 170K 424L 597M 455N 376P 279R 333
ANSI COMBOS 15 DIAT 231 DIAU 191 DIA
PX20-100mm (4”) MetAL PUMP- Advanced Series
Models
Optional Configurations
Dimensions Performance Curve
40[151]
80[303]
120[454]
160[606]
200[757]
240[908]
280[1060]
320[1211]
(60)[102](90)[153]
(120)[204]
(150)[255]
(30)[51]
40[151]
80[303]
120[454]
160[606]
200[757]
240[908]
(50) [85](75) [128]
(100) [170](125) [213]
(25) [43]
RUBBER
RUBBER
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
2424aoDD pumps
PrOFLO INtrO
Pro-Flo ShiFt modEl
inlEt/ diSchArGEmAx diSchArGE PrESSurE
mAx SolidS SizE
mAx Suction liFt mAx FloW
PS4 Original Series 38 mm (1-1/2")/32 mm (1-1/4") 8.6 bar (125 psig) 4.8 mm (3/16") 7.1 m (23.3') Dry, 8.6 m (28.4') Wet 375lpm (99 gpm)
PS8 Original Series 51 mm (2") 8.6 bar (125 psig) 6.4 mm (1/4") 7.2 m (23.8') Dry, 9.0 m (29.5') Wet 723lpm (191 gpm)
PS15 Original Series 76 mm (3") 8.6 bar (125 psig) 9.5 mm (3/8”) 8.6 m (28.4') Dry, 6.6 m (21.6') Wet 927lpm (245 gpm)
PS400 Advanced Series 38 mm (1-1/2") 8.6 bar (125 psig) 4.8 mm (3/16") 5.7 m (18.4') Dry, 8.6 m (28.4') Wet 507lpm (134 gpm)
PS800 Advanced Series 51 mm (2") 8.6 bar (125 psig) 6.4 mm (1/4") 6.4 m (21.0') Dry, 8.6 m (28.4') Wet 704lpm (186 gpm)
PS1500 Advanced Series 76 mm (3") 8.6 bar (125 psig) 12.7 mm (1/2") 7.2 m (23.8') Dry, 9.0 m (29.5') Wet 1056lpm (279 gpm)
State Of the Art Air Distribution Systems
Market Position: Features:Application traits:
Availability:
introducing the world’s most energy efficient pump in its class…
…that class now has a new leader!!!
The Pro-Flo® SHIFT is the new standard for AODD pumps. The innovative, yet simple, Pro-Flo® SHIFT Air Distribution System (ADS) features an “air control spool” that automatically optimizes air consumption and eliminates the overfilling that can lead to overcharging of the air chamber, all while causing no corresponding reduction in flow rate.
The Pro-Flo® SHIFT’s revolutionary ADS design meters the air flow, allowing for just enough air to keep the pumping process operational. The results are a reduction in air consumption and operational costs while maximum operational efficiency and volumetric consistency are maintained.
Now is the perfect time to shift your thinking in AODD pump performance with the “game-changing” Pro-Flo® SHIFT.
• Greater yield per SCFM of air used
• Wider application range
• Repeatable, predictable performance
• Less product waste
• Max. Mean Time Between Repair (MTBR)
• Increased application range compatibility
• Minimum training required
• No special skill set needed for maintenance or operation
• Cost efficient: 50% less expensive than an electronically actuated ADS
• Faster return on investment
• Robust design for harsh operating conditions
• Metered air consumption for less product waste
• Creates the highest performance ratio
• Superior flow rate
• Superior anti-freezing
• Single-point exhaust option
• Lube-free operation
• Reduced maintenance costs
• ON/OFF reliability
• Environmental sensitivity
• Simple and durable pump design
• Simple components
• Faster, easier setup time
• Plug-N-Play operation
• No electricity needed
• Precise flow rate at start-up
• Non-stalling unbalanced spool
• Drop-in configuration capability
• Reduced energy consumption
• Lower carbon footprint
• ATEX-compatible for use
• 38 mm (1-1/2")
• 51 mm (2")
• 76 mm (3")
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
25AO
DD P
UMPS
PS4- 38mm (1 ½”) Original Series Pump Dimensions
ITEM DIMENSION (mm)
A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12899 XPS4/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
04-13014 XPS4/WMAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
04-12919 XPS4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM DIMENSION (mm)
L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13
PS400- 38mm (1 ½”) Advanced Series Pump Dimensions
ITEM Dimensions (MM)
A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12934 XPS400/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
04-12932 XPS400/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
04-13069 XPS400/SSSAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 518 M 244 N 206 P 152 R 170 S 10
DIN(mm) T 150 DIA U 110 DIA V 18 DIA
PS8- 50mm (2”) Original Series Pump Dimensions
ITEM Dimension (mm)
A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 08-14498 XPS8/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
08-14627 XPS8/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
08-14518 XPS8/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimension (mm)
N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA
PS800- 50mm Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers
08-14531 XPS800/AAAAA/ZWS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
08-14528 XPS800/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
08-14552 XPS800/SSAAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 659 M 330 N 254 P 325 R 378 S 15
DIN(mm) T 165 DIA U 122 DIA V 20 DIA
PS15- 76mm (3”) Original Series Pumps Dimensions
ITEM Dimension (mm)
A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-12334 XPS15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
15-12354 XPS15/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
15-12424 XPS15/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
ITEM Dimension (mm)
N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480
AA 16 DIA
PS1500- 76mm (3”) Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-1236 XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium Neoprene
15-12364 XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium Wilflex (Santoprene Sanitary grade)
15-12370 XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimensions (mm)
L 709 M 363 N 307 P 259 R 282 S 18
DIN(mm) T 200 DIA U 160 DIA V 18 DIA
PS4- 38mm (1 ½”) Original Series Pump Dimensions
ITEM DIMENSION (mm)
A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12899 XPS4/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
04-13014 XPS4/WMAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
04-12919 XPS4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM DIMENSION (mm)
L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13
PS400- 38mm (1 ½”) Advanced Series Pump Dimensions
ITEM Dimensions (MM)
A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12934 XPS400/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
04-12932 XPS400/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
04-13069 XPS400/SSSAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 518 M 244 N 206 P 152 R 170 S 10
DIN(mm) T 150 DIA U 110 DIA V 18 DIA
PS8- 50mm (2”) Original Series Pump Dimensions
ITEM Dimension (mm)
A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 08-14498 XPS8/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
08-14627 XPS8/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
08-14518 XPS8/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimension (mm)
N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA
PS800- 50mm Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers
08-14531 XPS800/AAAAA/ZWS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
08-14528 XPS800/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
08-14552 XPS800/SSAAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 659 M 330 N 254 P 325 R 378 S 15
DIN(mm) T 165 DIA U 122 DIA V 20 DIA
PS15- 76mm (3”) Original Series Pumps Dimensions
ITEM Dimension (mm)
A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-12334 XPS15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
15-12354 XPS15/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
15-12424 XPS15/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
ITEM Dimension (mm)
N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480
AA 16 DIA
PS1500- 76mm (3”) Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-1236 XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium Neoprene
15-12364 XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium Wilflex (Santoprene Sanitary grade)
15-12370 XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimensions (mm)
L 709 M 363 N 307 P 259 R 282 S 18
DIN(mm) T 200 DIA U 160 DIA V 18 DIA
PS4- 38mm (1 ½”) Original Series Pump Dimensions
ITEM DIMENSION (mm)
A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12899 XPS4/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
04-13014 XPS4/WMAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
04-12919 XPS4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM DIMENSION (mm)
L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13
PS400- 38mm (1 ½”) Advanced Series Pump Dimensions
ITEM Dimensions (MM)
A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12934 XPS400/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
04-12932 XPS400/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
04-13069 XPS400/SSSAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 518 M 244 N 206 P 152 R 170 S 10
DIN(mm) T 150 DIA U 110 DIA V 18 DIA
PS8- 50mm (2”) Original Series Pump Dimensions
ITEM Dimension (mm)
A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 08-14498 XPS8/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
08-14627 XPS8/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
08-14518 XPS8/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimension (mm)
N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA
PS800- 50mm Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers
08-14531 XPS800/AAAAA/ZWS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
08-14528 XPS800/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
08-14552 XPS800/SSAAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 659 M 330 N 254 P 325 R 378 S 15
DIN(mm) T 165 DIA U 122 DIA V 20 DIA
PS15- 76mm (3”) Original Series Pumps Dimensions
ITEM Dimension (mm)
A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-12334 XPS15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
15-12354 XPS15/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
15-12424 XPS15/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
ITEM Dimension (mm)
N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480
AA 16 DIA
PS1500- 76mm (3”) Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-1236 XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium Neoprene
15-12364 XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium Wilflex (Santoprene Sanitary grade)
15-12370 XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimensions (mm)
L 709 M 363 N 307 P 259 R 282 S 18
DIN(mm) T 200 DIA U 160 DIA V 18 DIA
PS4- 38mm (1 ½”) Original Series Pump Dimensions
ITEM DIMENSION (mm)
A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12899 XPS4/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
04-13014 XPS4/WMAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
04-12919 XPS4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM DIMENSION (mm)
L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13
PS400- 38mm (1 ½”) Advanced Series Pump Dimensions
ITEM Dimensions (MM)
A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12934 XPS400/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
04-12932 XPS400/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
04-13069 XPS400/SSSAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 518 M 244 N 206 P 152 R 170 S 10
DIN(mm) T 150 DIA U 110 DIA V 18 DIA
PS8- 50mm (2”) Original Series Pump Dimensions
ITEM Dimension (mm)
A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 08-14498 XPS8/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
08-14627 XPS8/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
08-14518 XPS8/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimension (mm)
N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA
PS800- 50mm Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers
08-14531 XPS800/AAAAA/ZWS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
08-14528 XPS800/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
08-14552 XPS800/SSAAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 659 M 330 N 254 P 325 R 378 S 15
DIN(mm) T 165 DIA U 122 DIA V 20 DIA
PS15- 76mm (3”) Original Series Pumps Dimensions
ITEM Dimension (mm)
A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-12334 XPS15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
15-12354 XPS15/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
15-12424 XPS15/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
ITEM Dimension (mm)
N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480
AA 16 DIA
PS1500- 76mm (3”) Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-1236 XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium Neoprene
15-12364 XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium Wilflex (Santoprene Sanitary grade)
15-12370 XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimensions (mm)
L 709 M 363 N 307 P 259 R 282 S 18
DIN(mm) T 200 DIA U 160 DIA V 18 DIA
PS4- 38mm (1 ½”) Original Series Pump Dimensions
ITEM DIMENSION (mm)
A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12899 XPS4/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
04-13014 XPS4/WMAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
04-12919 XPS4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM DIMENSION (mm)
L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13
PS400- 38mm (1 ½”) Advanced Series Pump Dimensions
ITEM Dimensions (MM)
A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12934 XPS400/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
04-12932 XPS400/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
04-13069 XPS400/SSSAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 518 M 244 N 206 P 152 R 170 S 10
DIN(mm) T 150 DIA U 110 DIA V 18 DIA
PS8- 50mm (2”) Original Series Pump Dimensions
ITEM Dimension (mm)
A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 08-14498 XPS8/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
08-14627 XPS8/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
08-14518 XPS8/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimension (mm)
N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA
PS800- 50mm Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers
08-14531 XPS800/AAAAA/ZWS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
08-14528 XPS800/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
08-14552 XPS800/SSAAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 659 M 330 N 254 P 325 R 378 S 15
DIN(mm) T 165 DIA U 122 DIA V 20 DIA
PS15- 76mm (3”) Original Series Pumps Dimensions
ITEM Dimension (mm)
A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-12334 XPS15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
15-12354 XPS15/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
15-12424 XPS15/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
ITEM Dimension (mm)
N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480
AA 16 DIA
PS1500- 76mm (3”) Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-1236 XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium Neoprene
15-12364 XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium Wilflex (Santoprene Sanitary grade)
15-12370 XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimensions (mm)
L 709 M 363 N 307 P 259 R 282 S 18
DIN(mm) T 200 DIA U 160 DIA V 18 DIA
PS4- 38mm (1 ½”) Original Series Pump Dimensions
ITEM DIMENSION (mm)
A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12899 XPS4/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
04-13014 XPS4/WMAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
04-12919 XPS4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM DIMENSION (mm)
L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13
PS400- 38mm (1 ½”) Advanced Series Pump Dimensions
ITEM Dimensions (MM)
A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12934 XPS400/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
04-12932 XPS400/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
04-13069 XPS400/SSSAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 518 M 244 N 206 P 152 R 170 S 10
DIN(mm) T 150 DIA U 110 DIA V 18 DIA
PS8- 50mm (2”) Original Series Pump Dimensions
ITEM Dimension (mm)
A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 08-14498 XPS8/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
08-14627 XPS8/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
08-14518 XPS8/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimension (mm)
N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA
PS800- 50mm Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers
08-14531 XPS800/AAAAA/ZWS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
08-14528 XPS800/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
08-14552 XPS800/SSAAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 659 M 330 N 254 P 325 R 378 S 15
DIN(mm) T 165 DIA U 122 DIA V 20 DIA
PS15- 76mm (3”) Original Series Pumps Dimensions
ITEM Dimension (mm)
A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-12334 XPS15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
15-12354 XPS15/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
15-12424 XPS15/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
ITEM Dimension (mm)
N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480
AA 16 DIA
PS1500- 76mm (3”) Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-1236 XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium Neoprene
15-12364 XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium Wilflex (Santoprene Sanitary grade)
15-12370 XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimensions (mm)
L 709 M 363 N 307 P 259 R 282 S 18
DIN(mm) T 200 DIA U 160 DIA V 18 DIA
aoDD pumpsPrO-FLO
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS04-12899 XPS4/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
04-13014 XPS4/WMAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
04-12919 XPS4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS08-14498 XPS8/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
08-14627 XPS8/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
08-14518 XPS8/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS15-12334 XPS15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
15-12354 XPS15/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
15-12424 XPS15/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
itEmdimEnSion (mm)
A 368B 64C 231D 429E 213F 48G 147H 324J 525K 51
itEmdimEnSion (mm)
A 404B 45C 363D 630E 668F 58G 64H 346J 48K 339L 659M 315
itEmdimEnSion (mm)
A 514B 61C 416D 758E 816F 70G 83H 399J 49K 219L 425M 710
PS4-38mm (1 ½”) - Original Series
PS8-50mm (2”) - Original Series
PS15-76mm (3”) - Original Series
Models
Models
Models
Dimensions
Dimensions
Dimensions
Performance Curve
Performance Curve
Performance Curve
itEmdimEnSion (mm)
L 262M 224N 150P 178R 10S 48T 338U 224V 155W 193X 13
itEmdimEnSion (mm)
N 257P 231R 257S 15T 64U 51V 284W 58X 279Y 396Z 15 DIA
itEmdimEnSion (mm)
N 319P 307R 257S 281T 16U 71V 74W 308X 83Y 305Z 480AA 16 DIA
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
2626
PS4- 38mm (1 ½”) Original Series Pump Dimensions
ITEM DIMENSION (mm)
A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12899 XPS4/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
04-13014 XPS4/WMAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
04-12919 XPS4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM DIMENSION (mm)
L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13
PS400- 38mm (1 ½”) Advanced Series Pump Dimensions
ITEM Dimensions (MM)
A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12934 XPS400/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
04-12932 XPS400/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
04-13069 XPS400/SSSAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 518 M 244 N 206 P 152 R 170 S 10
DIN(mm) T 150 DIA U 110 DIA V 18 DIA
PS8- 50mm (2”) Original Series Pump Dimensions
ITEM Dimension (mm)
A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 08-14498 XPS8/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
08-14627 XPS8/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
08-14518 XPS8/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimension (mm)
N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA
PS800- 50mm Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers
08-14531 XPS800/AAAAA/ZWS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
08-14528 XPS800/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
08-14552 XPS800/SSAAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 659 M 330 N 254 P 325 R 378 S 15
DIN(mm) T 165 DIA U 122 DIA V 20 DIA
PS15- 76mm (3”) Original Series Pumps Dimensions
ITEM Dimension (mm)
A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-12334 XPS15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
15-12354 XPS15/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
15-12424 XPS15/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
ITEM Dimension (mm)
N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480
AA 16 DIA
PS1500- 76mm (3”) Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-1236 XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium Neoprene
15-12364 XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium Wilflex (Santoprene Sanitary grade)
15-12370 XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimensions (mm)
L 709 M 363 N 307 P 259 R 282 S 18
DIN(mm) T 200 DIA U 160 DIA V 18 DIA
PS4- 38mm (1 ½”) Original Series Pump Dimensions
ITEM DIMENSION (mm)
A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12899 XPS4/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
04-13014 XPS4/WMAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
04-12919 XPS4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM DIMENSION (mm)
L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13
PS400- 38mm (1 ½”) Advanced Series Pump Dimensions
ITEM Dimensions (MM)
A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12934 XPS400/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
04-12932 XPS400/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
04-13069 XPS400/SSSAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 518 M 244 N 206 P 152 R 170 S 10
DIN(mm) T 150 DIA U 110 DIA V 18 DIA
PS8- 50mm (2”) Original Series Pump Dimensions
ITEM Dimension (mm)
A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 08-14498 XPS8/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
08-14627 XPS8/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
08-14518 XPS8/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimension (mm)
N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA
PS800- 50mm Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers
08-14531 XPS800/AAAAA/ZWS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
08-14528 XPS800/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
08-14552 XPS800/SSAAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 659 M 330 N 254 P 325 R 378 S 15
DIN(mm) T 165 DIA U 122 DIA V 20 DIA
PS15- 76mm (3”) Original Series Pumps Dimensions
ITEM Dimension (mm)
A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-12334 XPS15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
15-12354 XPS15/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
15-12424 XPS15/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
ITEM Dimension (mm)
N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480
AA 16 DIA
PS1500- 76mm (3”) Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-1236 XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium Neoprene
15-12364 XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium Wilflex (Santoprene Sanitary grade)
15-12370 XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimensions (mm)
L 709 M 363 N 307 P 259 R 282 S 18
DIN(mm) T 200 DIA U 160 DIA V 18 DIA
PS4- 38mm (1 ½”) Original Series Pump Dimensions
ITEM DIMENSION (mm)
A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12899 XPS4/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
04-13014 XPS4/WMAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
04-12919 XPS4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM DIMENSION (mm)
L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13
PS400- 38mm (1 ½”) Advanced Series Pump Dimensions
ITEM Dimensions (MM)
A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12934 XPS400/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
04-12932 XPS400/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
04-13069 XPS400/SSSAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 518 M 244 N 206 P 152 R 170 S 10
DIN(mm) T 150 DIA U 110 DIA V 18 DIA
PS8- 50mm (2”) Original Series Pump Dimensions
ITEM Dimension (mm)
A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 08-14498 XPS8/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
08-14627 XPS8/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
08-14518 XPS8/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimension (mm)
N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA
PS800- 50mm Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers
08-14531 XPS800/AAAAA/ZWS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
08-14528 XPS800/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
08-14552 XPS800/SSAAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 659 M 330 N 254 P 325 R 378 S 15
DIN(mm) T 165 DIA U 122 DIA V 20 DIA
PS15- 76mm (3”) Original Series Pumps Dimensions
ITEM Dimension (mm)
A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-12334 XPS15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
15-12354 XPS15/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
15-12424 XPS15/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
ITEM Dimension (mm)
N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480
AA 16 DIA
PS1500- 76mm (3”) Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-1236 XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium Neoprene
15-12364 XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium Wilflex (Santoprene Sanitary grade)
15-12370 XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimensions (mm)
L 709 M 363 N 307 P 259 R 282 S 18
DIN(mm) T 200 DIA U 160 DIA V 18 DIA
PS4- 38mm (1 ½”) Original Series Pump Dimensions
ITEM DIMENSION (mm)
A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12899 XPS4/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
04-13014 XPS4/WMAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
04-12919 XPS4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM DIMENSION (mm)
L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13
PS400- 38mm (1 ½”) Advanced Series Pump Dimensions
ITEM Dimensions (MM)
A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12934 XPS400/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
04-12932 XPS400/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
04-13069 XPS400/SSSAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 518 M 244 N 206 P 152 R 170 S 10
DIN(mm) T 150 DIA U 110 DIA V 18 DIA
PS8- 50mm (2”) Original Series Pump Dimensions
ITEM Dimension (mm)
A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 08-14498 XPS8/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
08-14627 XPS8/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
08-14518 XPS8/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimension (mm)
N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA
PS800- 50mm Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers
08-14531 XPS800/AAAAA/ZWS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
08-14528 XPS800/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
08-14552 XPS800/SSAAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 659 M 330 N 254 P 325 R 378 S 15
DIN(mm) T 165 DIA U 122 DIA V 20 DIA
PS15- 76mm (3”) Original Series Pumps Dimensions
ITEM Dimension (mm)
A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-12334 XPS15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
15-12354 XPS15/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
15-12424 XPS15/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
ITEM Dimension (mm)
N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480
AA 16 DIA
PS1500- 76mm (3”) Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-1236 XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium Neoprene
15-12364 XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium Wilflex (Santoprene Sanitary grade)
15-12370 XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimensions (mm)
L 709 M 363 N 307 P 259 R 282 S 18
DIN(mm) T 200 DIA U 160 DIA V 18 DIA
PS4- 38mm (1 ½”) Original Series Pump Dimensions
ITEM DIMENSION (mm)
A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12899 XPS4/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
04-13014 XPS4/WMAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
04-12919 XPS4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM DIMENSION (mm)
L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13
PS400- 38mm (1 ½”) Advanced Series Pump Dimensions
ITEM Dimensions (MM)
A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12934 XPS400/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
04-12932 XPS400/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
04-13069 XPS400/SSSAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 518 M 244 N 206 P 152 R 170 S 10
DIN(mm) T 150 DIA U 110 DIA V 18 DIA
PS8- 50mm (2”) Original Series Pump Dimensions
ITEM Dimension (mm)
A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 08-14498 XPS8/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
08-14627 XPS8/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
08-14518 XPS8/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimension (mm)
N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA
PS800- 50mm Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers
08-14531 XPS800/AAAAA/ZWS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
08-14528 XPS800/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
08-14552 XPS800/SSAAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 659 M 330 N 254 P 325 R 378 S 15
DIN(mm) T 165 DIA U 122 DIA V 20 DIA
PS15- 76mm (3”) Original Series Pumps Dimensions
ITEM Dimension (mm)
A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-12334 XPS15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
15-12354 XPS15/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
15-12424 XPS15/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
ITEM Dimension (mm)
N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480
AA 16 DIA
PS1500- 76mm (3”) Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-1236 XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium Neoprene
15-12364 XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium Wilflex (Santoprene Sanitary grade)
15-12370 XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimensions (mm)
L 709 M 363 N 307 P 259 R 282 S 18
DIN(mm) T 200 DIA U 160 DIA V 18 DIA
PS4- 38mm (1 ½”) Original Series Pump Dimensions
ITEM DIMENSION (mm)
A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12899 XPS4/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
04-13014 XPS4/WMAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
04-12919 XPS4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM DIMENSION (mm)
L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13
PS400- 38mm (1 ½”) Advanced Series Pump Dimensions
ITEM Dimensions (MM)
A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12934 XPS400/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
04-12932 XPS400/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
04-13069 XPS400/SSSAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 518 M 244 N 206 P 152 R 170 S 10
DIN(mm) T 150 DIA U 110 DIA V 18 DIA
PS8- 50mm (2”) Original Series Pump Dimensions
ITEM Dimension (mm)
A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 08-14498 XPS8/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
08-14627 XPS8/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
08-14518 XPS8/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimension (mm)
N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA
PS800- 50mm Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers
08-14531 XPS800/AAAAA/ZWS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
08-14528 XPS800/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
08-14552 XPS800/SSAAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
ITEM Dimensions (mm)
L 659 M 330 N 254 P 325 R 378 S 15
DIN(mm) T 165 DIA U 122 DIA V 20 DIA
PS15- 76mm (3”) Original Series Pumps Dimensions
ITEM Dimension (mm)
A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-12334 XPS15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)
15-12354 XPS15/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
15-12424 XPS15/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene
ITEM Dimension (mm)
N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480
AA 16 DIA
PS1500- 76mm (3”) Advanced Series Pumps Dimensions.
ITEM Dimensions (MM)
A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388
Models
Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-1236 XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium Neoprene
15-12364 XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium Wilflex (Santoprene Sanitary grade)
15-12370 XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
ITEM Dimensions (mm)
L 709 M 363 N 307 P 259 R 282 S 18
DIN(mm) T 200 DIA U 160 DIA V 18 DIA
aoDD pumpsPrO-FLO
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS04-12934 XPS400/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
04-12932 XPS400/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
04-13069 XPS400/SSSAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS08-14531 XPS800/AAAAA/ZWS/WF/WF Aluminium Aluminium Wilflex (Santoprene)
08-14528 XPS800/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
08-14552 XPS800/SSAAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)
modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS15-1236 XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium Neoprene
15-12364 XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium Wilflex (Santoprene Sanitary grade)
15-12370 XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)
itEmdimEnSion (mm)
A 343B 79C 339D 531E 594F 122G 321H 48J 132K 308
itEmdimEnSion (mm)
L 518M 244N 206P 152R 170S 10
DIN(mm)T 150 DIAU 110 DIAV 18 DIA
itEmdimEnSion (mm)
A 439B 89C 396D 676E 759F 48G 117H 390J 161K 338
itEmdimEnSion (mm)
ç 615B 127C 551D 934E 1031F 165G 533H 48J 211K 388
PS400-38mm (1 ½”) - Advanced Series
PS800-50mm (2") - Advanced Series
PS1500-76mm (3”) - Advanced Series
Models
Models
Models
Dimensions
Dimensions
Dimensions
Performance Curve
Performance Curve
Performance Curve
itEmdimEnSion (mm)
L 659M 330N 254P 325R 378S 15
DIN(mm)T 165 DIAU 122 DIAV 20 DIA
itEmdimEnSion (mm)
L 709M 363N 307P 259R 282S 18
DIN(mm)T 200 DIAU 160 DIAV 18 DIA
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
27AO
DD P
UMPS
aoDD pumpsMININg SerIeS PUMPS
PX438mm (11/2") METAL STALLION
PX850mm (2") METAL STALLION
PX1576mm (3") METAL STALLION
Stallion Solids Hangling Pumps
Features
The stallion pump series can handle what miners demand: durability, portability and ease of maintenance. The stallion pump is designed to transfer solid-laden slurries safely and effectively. Large internal clearance and flow-through design keep the pump from clogging while Wilden's patented air distribution systems maintains ON/OFF reliability
• Large solids to 25mm (1")
• Collapsible handles
• Shock absorbing base
• Intrinsically safe operation
• Screen base models
PumP modEl Air SyStEm conStruction ElAStomErS connEctionS
T2/PKPPB/NES/NE/PBN/0400 TURBO-FLO POLYPROPYLENE NEOPRENE 1” ANSI FLANGE
P4/PWSPP/NEU/NE/PBN PRO-FLO POLYPROPYLENE NEOPRENE 11/2” ANSI FLANGE
T4/PWPPB/NEU/NE/PBN TURBO-FLO POLYPROPYLENE NEOPRENE 11/2” ANSI FLANGE
P4/WWLLL/NEU/NE/NE/0118 PRO-FLO CAST IRON NEOPRENE 11/2” BSPT (F)
T4/WWPPB/NEU/NE/NE0282 TURBO-FLO CAST IRON NEOPRENE 11/2” BSPT (F)
P8/PKWPP/NEU/NE/PBN PRO-FLO POLYPROPYLENE NEOPRENE 2” ANSI FLANGE
T8/PKWPB/NEU/NE/PBN TURBO-FLO POLYPROPYLENE NEOPRENE 2” ANSI FLANGE
P8/WWWPP/NEU/NE/NE/0118 PRO-FLO CAST IRON NEOPRENE 2” BSPT (F)
T8/WWWPB/NEU/NE/NE/0118 TURBO-FLO CAST IRON NEOPRENE 2” BSPT (F)
T15/WWWPB/NEU/NE/NE0046 TURBO-FLO CAST IRON NEOPRENE 3” BSPT (F)
T20/WWWPB/NEU/PU/PEP TURBO-FLO CAST IRON NEOPRENE 4” ANSI FLANGE
Features• Large solids to 25 mm (1")• Collapsible handles• Shock absorbing base• Intrinsically safe operation• Screen base models
Stallion Solids Handing PumpsThe Stallion pump series can handle what minersdemand: durability, portability and ease of maintenance. The Stallion pump is designed totransfer solid-laden slurries safely and effectively.Large internal clearance and flow-through designkeep the pump from clogging while Wilden'spatented airdistribution systemmaintainsON/OFFreliability.
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
2828aoDD pumpsMININg SerIeS PUMPS
� ���������
������������������
��������� ��������� ������ ����������
������� ��������� ��������������
����������
ruBBEr FittEd t2r PlAStic PumP
ruBBEr FittEd P4 mEtAl PumP
ruBBEr FittEd t8 PlAStic PumP
ruBBEr FittEd P8 mEtAl PumP
ruBBEr FittEd t20 mEtAl PumP
ruBBEr FittEd t4 PlAStic PumP
ruBBEr FittEd t8 mEtAl PumP
ruBBEr FittEd t15 mEtAl PumP
ruBBEr FittEd P4 mEtAl PumP
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
29AO
DD P
UMPS
aoDD pumpsHIgH PreSSUre PUMPS
Wilden's Brahma™ Flap Valve pump is designed for maximum solids passage. Its enhanced durability, rugged design and outstanding performance make Brahma the right choice for the toughest applications out there.
The Brahma is available in two air distribution system (ADS) options: the rugged and reliable Turbo-Flo™ and the revolutionary Pro-Flo X™.
PX81051mm (2")
METAL
PX151076mm (3")
METAL
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
3030aoDD pumpsMININg SerIeS PUMPS
Wilden’s high pressure product line was designed to reliably transfer viscous, solid-laden slurries at high head pressures. These air-operated, diaphragm pumps are available with simplex or duplex technology to generate 17.2 bar (250 psig).
The simplex creates a 2:1 pressure ratio while the duplex creates a 3:1 pressure ratio. Wilden high pressure pumps do not require costly external boosters or amplifiers to achieve this pressure output. Our powerful solutions will create profitable results in your application.
H20025mm (1")
METAL
H80051mm (2") ALUMINUM
HX400S25mm (11/2") ALUMINUM
HX400S38mm (11/2")
STAINLESS STEEL
H1500HS76mm (3")
STAINLESS STEEL
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
31AO
DD P
UMPS
aoDD pumpsHYgIeNIC/SANIFLO PUMPS
The Saniflo™ Series pump line is specifically designed to meet the strict guidelines established for sanitary process applications. Saniflo™ pumps incorporate a straight flowthrough design, large solids passage and efficiencies to insure process success. Saniflo™ pumps have a shear sensitive operation, Tri-clamp® style fittings and are offered in various surface finishes. The Saniflo™ pump line also offers pumps that are CIP (clean in place) and COP (clean out of place) for ease of use and maintenance.
Wilden is consistently meeting and exceeding industry standards by having the certifications needed (FDA, USDA, 3A, ATEX) in order to help refine your process. Saniflo™ Series Pumps are used in the Food and Beverage and Biopharmaceutical industries.
Hygienic SeriesFEAturES tEchnicAl dAtA
Pro-Flo X™ ADS Sizes available 25mm (1”)through to 76mm (3”)
Sanitary & Hygienic applications 316L Stainless Steel wetted components
Delicate/shear sensitive product handling
Contact surfaces with Ra 0.8μm (32μ-in)
Integral piston diaphragm options
Valve options available: ball,mushroom, flap
Multiple sanitary elastomers available Tri-clamp™ style connections
Superior product containment
Swivel stand available PErFormAncE dAtA
CIP (Clean In Place) Max flow rates 874lpm (231gpm) (Valve ball style)
Multiple certification levels available
Max suction lift: Dry: 5.5m(19.2’), Wet: 9.3m (30.6’)
(Valve ball style)
Certifications: EHEDG, 3-A,ATEX, CE, USP Class VI, FDA
Max size solids: 76mm (3”) (Flapvalve style not available in
25mm (1”) models)
Offset valve housing for easy alignment
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
3232aoDD pumps
HYgIeNIC/SANIFLO PUMPS
Saniflo SeriesFEAturES tEchnicAl dAtA
Pro-Flo®, Pro-Flo X™ and Accu-Flo™ ADS available
Sizes available: 13mm (1/2”)through 76mm (3”)
For sanitary applications 316L Stainless Steel wetted components
Multiple sanitary FDA elastomers available Tri-clamp™ style connections
Shear sensitive
Intrinsically safe options PErFormAncE dAtA
Certifications: FDA, CE, ATEX Max flow rate: 920lpm (243gpm)
Max suction lift: Dry: 7.6m (25.0’), Wet: 9.5m (31.2’)
Max size solids: 76mm (3”) (Flapvalve style not available in
25mm (1”) models)
Max solids size: 9.5mm (3/8”)
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
33AO
DD P
UMPS
aoDD pumpsOrIgINAL SerIeS - SUrge DAMPeNerS
The SD Equalizer® was designed to remove pressure variation on the discharge end of the pump. It has a flow-through design manufactured with existing Wilden pump parts. The SD series automatically sets and maintains the correct air pressure required, optimising its effectiveness.
• Reduces pipe vibration and shaking
• Protects in-line equipment
• Reduces water hammer
• Absorbs acceleration head
• Lowers system maintenance cost
• Suction stabiliser
• Prevents leaking at pipe fittings and joints
• Extends and improves pump performance
• Avoids damaging pressure surges
• Wide range of material and elastomer options
• Common parts with Wilden pumps
• Self adjusts to system pressure
AvAilABlE SizESmAtEriAlS oF conStruction:
WEttEd houSinG Air diStriBution SyStEm
13 mm (1/2") Aluminum Aluminum
25 mm (1") 316 Stainless Steel 316 Stainless Steel
38 mm (1-1/2") Ductile Iron PTFE-coated Ductile Iron
51 mm (2") Polypropylene Polypropylene
76 mm (3") PVDF Glass-filled Polypropylene
Mild Steel PTFE-coated
EnErGy SAvinG Reliable On-Off control of air driven pumps conserves costly compressed air and saves pumps parts
non BuBBlinG Design eliminates constant 24 hr/day usage of instrument air
rEliABlE No moving parts in contact with the liquid being sensed - Thousands of units in use since 1978
FloAtlESS Works in foamy “gunky” turbulent areas where other controls fail. Operates on any liquid that will rise and fall by gravity in the 4” sensing tube
non ElEctric No costly wiring - one trade installs and service
ExPloSion rESiStAnt All pneumatic design allows use in hazardous areas
FrEQuEnt cyclinG Pumps away suspended materials before they settle and harden
APCO Level Controller
Features and Benefits:
• Control Pumps In Sumps as shallow as 12”
• Fill Overhead Tanks
• Control Pinch Valves, Cylinders and Other Pneumatic Equipment
• Packaged Systems AvailableModel #1010RFor Deep Sumps and Tank Filling
Model #1010For Shallow Sumps and Submerged Pump Applications
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
3434aoDD pumps
OrIgINAL SerIeS -ACCeSSOrIeSWilden’s accessory products add value to your liquid process and expand the application range of Wilden pumps by augmenting the performance and/or utility of the pump. Our electronic controllers automate your Wilden pump for batching and other electronically controlled dispensing applications. We can also create laminar process flow by eliminating pump pulsation, or control the liquid level within a system of process.
WILDeN Wil-gardThe Wil-GardTM detects diaphragm failure at the source: the primary diaphragm, not at the air chamber or the air exhaust as other systems do.
• Sensors are located between the primary and back-up (containment) diaphragms
• When the sensors detect a conductive liquid, anaudible alarm, LED and an internal latching relay are activated
• Increase containment, reduce fugitive emissions and reduce downtime with 24-hour pump surveillance
• Power requirement:110VAC, 220V AC or 9V DC battery
WILDeN Pump Cycle MonitorThe PCMI counts pump cycles by sensing the presence of the air valve piston (Turbo-FloTM) or air valve spool (Pro-FloTM).
• The sensor, located at the air valve and cap, detects the presence of a magnet located at the end of the air valve piston/spool
• The PCMI registers a complete pump cycle when the piston/spool shifts away from the sensor and subsequently returns to the original position
• The PCMI unit has a reset switch located on the face of the PCMI module
• PCMI has the ability to be reset from a remote location
WILDeN Drum Pump KitThe inherent features of the Wilden air-operated pump and Accu-FloTM pump technology allow it to excel as a utilitarian drum pump. Various speed and pressure capability, the ability to run dry, self-prime and dead-head offers you flexibility at a low cost. The Wilden universal drum pump kit enables Wilden 6 mm (1/4") and 13 mm (1/2") pumps to adapt directly to drums for cost-effective, efficient liquid transfer.
• Universal kit for 6mm(1/4") and 13mm(1/2") pumps • Fits 51mm(2") NPT bung holes
• Tube length can be cut to length
• Variety of materials are available
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
35AO
DD P
UMPS
Almatec Maschinenbau GmbH is a premium manufacturer of air-operated double-diaphragm (AODD) pumps and a company which has successfully combined a worldwide presence with proximity to the end-user. Permanent product innovations and improvements have resulted in a large range of products and the opening up of new markets. Our extensive product range offers sophisticated and economical solutions for all of your applications.
The standard-setting advantages of pneumatic (or air-operated) diaphragm pumps include protection against dry running and overloading, self-priming capability, infinitely control, easy start up, no rotating parts in the product stream, solid handling capability and gentle displacement. The quality requirements of our pumps is high. Solid design, Perswing P® air control system, diaphragms and best-in-class materials are quality features demanded by our customers
The E-Series represents the latest generation of plastic air-operated double diaphragm pumps made in solid design. A few of the advantages of this pump include:
• Further increased pump safety due to innovative ring-tightening structure
• Increased capacity
• Decreased air consumption
• Reduced noise level
• Optimized flow pattern
Particular attention has been paid to the form of the product chambers when designing the metal pneumatic diaphragm pumps from
Almatec. CHEMICOR pumps with a centre block made of PE conductive meet the ATEX requirements of the directive 94/9/EG.
Further features of series CHEMICOR include:
• Two vertical joint faces only
• No clamping bands but tie rods
• Freely rotating suction and discharge ports
• Compact solid design
• Patented maintenance-free air control system perswing® without dead centre
aoDD pumpsALMAteC
e-Series
Chemicor
E-Series
CHEMICOR
BIOCOR
FUTUR
AH
CX
QUATTROFLOW
The CX series diaphragm pumps are used as general-purpose pumps for low to medium duty and also as drum pumps. They are
used to empty containers down to the very last drop and can therefore be used for complete and unattended transfer of liquids from
one container to another. The series comprises four pump sizes with maximum delivery volumes of 10, 20, 50 and 130 l/min (2.6, 5.3,
13.2 and 34 gpm). The housings are made of solid PE conductive for the use in explosion-protected areas.
Further features of series CX at a glance:
• with ball or cylinder valves
• composite diaphragms with integrated metal core
• metal free outer surface
• variable position of suction and discharge port
• handle recess with drainage
Options
A variety of optional equipment is available to allow for a precise set-up to your specific application.
Pulsation Damper
If a virtually uniform flow is needed, pulsation dampers in different versions are available.
Pump series: E-SERIES, CHEMICOR, BIOCOR, FUTUR
Barrier Chamber System
The ALMATEC barrier chamber system meets high safety requirements. The individual diaphragm is replaced by two diaphragms arranged in tandem with a barrier chamber of conductive PE between them and
filled with non-conductive liquid. A change in conductivity of the barrier liquid is detected by sensors and signalled to a controller, which triggers an alarm or disconnects the pump.
Pump series: E-SERIES, CHEMICOR, BIOCOR
Stroke Counting
ALMATEC air-operated diaphragm pumps can be used continuously (24h operation) or intermittently for hours, minutes or for an exact defined number of strokes. To accurately count the strokes a sensor can be
installed in the pump's center housing (available as pneumatic version also).
Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR
Diaphragm Monitoring
A capacitive sensor installed in the pump muffler detects the presence of liquids and in case of a diaphragm rupture it relays a corresponding signal to a controller that triggers an alarm or disconnects the pump via
a connected solenoid valve.
Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR
Flange Connection
According to recognized industry safety standards, all E-SERIES pump sizes from E 15 to E 80 can be equipped with thread bushings and flange-O-rings for flange connections to DIN or ANSI / PN 10.
Pump series: E-SERIES
Draining System
The E-SERIES pumps in sizes 15 to 50 are available with a special ALMATEC draining system consisting of a bypass system in the side housings that can be activated easily either via hand-operated valves or
pneumatically. In this way, the pump and piping can be drained without having to be dismounted. The amount of cleaning agent and solvent required when changing products is reduced considerably and this
greatly reduces environmental pollution.
Pump series: E-SERIES
Almatec Maschinenbau GmbH is a premium manufacturer of air-operated double-diaphragm (AODD) pumps and a company which has successfully combined a worldwide presence with proximity to the end-user.
Permanent product innovations and improvements have resulted in a large range of products and the opening up of new markets. Our extensive product range offers sophisticated and economical solutions for all
of your applications.
The standard-setting advantages of pneumatic (or air-operated) diaphragm pumps include protection against dry running and overloading, self-priming capability, infinitely control, easy start up, no rotating parts in
the product stream, solid handling capability and gentle displacement. The quality requirements of our pumps is high. Solid design, Perswing P® air control system, diaphragms and best-in-class materials are
quality features demanded by our customers
Particular attention has been paid to the form of the product chambers when designing the metal pneumatic diaphragm pumps from
Almatec. CHEMICOR pumps with a centre block made of PE conductive meet the ATEX requirements of the directive 94/9/EG.
Further features of series CHEMICOR include:
• two vertical joint faces only
• no clamping bands but tie rods
• freely rotating suction and discharge ports
• compact solid design
• patented maintenance-free air control system PERSWING® without dead centre
The ALMATEC pump series BIOCOR is especially designed for sterile applications within the pharmaceutical, biotechnical and
food industry.As demanded for in these applications all housing parts of the BIOCOR pumps have no horizontal areas and each
pump comes with four ball lifting magnets, which magnetically lift the balls off their seats so the pump can be drained entirely
without having to be dismounted. The three pump sizes B 20, B 32 and B 40 achieve max. capacities of 3.5/7.5/17 m³/h
(15.4/33/75 gpm) respectively and a max. discharge pressure of up to 7 bar (100 psig). The wetted housing parts are electro
polished 316 L stainless steel with a surface roughness of 0.4 m, and the centre block is made of conductive polyethylene.
Some of the features of the BIOCOR series include:
• Built in accordance to the essential specifications (EHEDG, 3-A, FDA, Class VI etc.)
• Integrated cleaning-system with high cleaning results
• CIP (clean in place) and SIP (sterilization in place) possible
• Sterile design: no horizontal areas
• Suction and discharge ports suitable for Tri-Clamp and other sanitary threads
ALMATEC's high-pressure diaphragm pumps made of plastic have been specially developed for charging filter presses with
chemical wastes and special sludge. With a driving pressure of max. 7 bar (100 psig), the AH series of pumps build up a delivery
pressure of 15 bar (218 psig) due to internal pressure boost. These genuine double-action pneumatic diaphragm pumps are
available in three sizes with a maximum delivery volume of 4 m³/h / 70 l/min / 18.5 gpm (AH 15), 10 m³/h / 180 l/min / 48 gpm (AH
25) and 20 m³/h / 330 l/min / 87 gpm (AH 40). All housing parts in contact with the product are made of PE UHMW which is
seven times more resistant to abrasion than Polypropylene and is also more wear resistant than iron, aluminium and some steels.
Some of the features of the series include:
• no control or safety elements required for safe operation over the entire range of capacity without over pressure
• corrosion and abrasion proof housing
• horizontal or vertical position for suction and discharge ports
• price alternative to piston-actuated diaphragm pumps and progressive cavity pumps
Since 1984 ALMATEC has manufactured specialist pumps for the chemical supply and circulation in the semiconductor industry.
The liquids handled in this industry set different demands to the pumps and the FUTUR series is available in a range of materials.
The different pump sizes achieve max. capacities between 10 and 200 l/min (2.6 - 52 gpm). The pumps have a compact, simple
design with few parts. The housing parts are machined from solid blocks, the basis for a long life time.
Some of the many features of the FUTUR series include:
four materials (T, H, E, S) for the different applications
no metal at all (T, H, E) temperature range up to 200°C/390°F (H)
patented, contactless cascade sealing between the product chambers no O-ring sealing in wetted areas straight-through flow pattern, only one wetted housing part
compact, simple design with few parts, very low space requirement
Quattroflow's positive displacement pumps incorporate four piston-diaphragm technology, with no mechanical seals, that are
driven by an eccentric shaft and electrical motor. Quattroflow products primarily serve the pharmaceutical and biotech industries
that require reliability, product safety, purity and cleanability.
The Quattroflow production program consists of four pump series:
- QF 150: This pump series is the best entry for laboratories, research centers and universities - small, portable, quiet and
scalable.
- QF 1200: A versatile tool for many applications in laboratories, pilot and production plants worldwide. Stainless steel valve plate
and new diaphragms allow inline steaming, autoclaving and easy cleaning.
- QF 4400: The QF-4400 Series is used in mid-sized crossflow systems and in chromatography systems, where gradient mixing
requires a 100:1 turndown ratio.
- QF 20K: The biggest Quattroflow pump with a max. capacity of 20000 l/h meets the requirements of high process volumes.
The pump series 150, 1200 and 4400 are also available in a "single use" version with product chambers made of plastic. The
main focus is the demand of the users for prevention of expensive and time-consuming flushing.
The E-Series represents the latest generation of plastic air-operated double diaphragm pumps made in solid design. A few of the
advantages of this pump include:
• further increased pump safety due to innovative ring-tightening structure
• increased capacity
• decreased air consumption
• reduced noise level
• optimized flow pattern
E-Series
CHEMICOR
BIOCOR
FUTUR
AH
CX
QUATTROFLOW
The CX series diaphragm pumps are used as general-purpose pumps for low to medium duty and also as drum pumps. They are
used to empty containers down to the very last drop and can therefore be used for complete and unattended transfer of liquids from
one container to another. The series comprises four pump sizes with maximum delivery volumes of 10, 20, 50 and 130 l/min (2.6, 5.3,
13.2 and 34 gpm). The housings are made of solid PE conductive for the use in explosion-protected areas.
Further features of series CX at a glance:
• with ball or cylinder valves
• composite diaphragms with integrated metal core
• metal free outer surface
• variable position of suction and discharge port
• handle recess with drainage
Options
A variety of optional equipment is available to allow for a precise set-up to your specific application.
Pulsation Damper
If a virtually uniform flow is needed, pulsation dampers in different versions are available.
Pump series: E-SERIES, CHEMICOR, BIOCOR, FUTUR
Barrier Chamber System
The ALMATEC barrier chamber system meets high safety requirements. The individual diaphragm is replaced by two diaphragms arranged in tandem with a barrier chamber of conductive PE between them and
filled with non-conductive liquid. A change in conductivity of the barrier liquid is detected by sensors and signalled to a controller, which triggers an alarm or disconnects the pump.
Pump series: E-SERIES, CHEMICOR, BIOCOR
Stroke Counting
ALMATEC air-operated diaphragm pumps can be used continuously (24h operation) or intermittently for hours, minutes or for an exact defined number of strokes. To accurately count the strokes a sensor can be
installed in the pump's center housing (available as pneumatic version also).
Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR
Diaphragm Monitoring
A capacitive sensor installed in the pump muffler detects the presence of liquids and in case of a diaphragm rupture it relays a corresponding signal to a controller that triggers an alarm or disconnects the pump via
a connected solenoid valve.
Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR
Flange Connection
According to recognized industry safety standards, all E-SERIES pump sizes from E 15 to E 80 can be equipped with thread bushings and flange-O-rings for flange connections to DIN or ANSI / PN 10.
Pump series: E-SERIES
Draining System
The E-SERIES pumps in sizes 15 to 50 are available with a special ALMATEC draining system consisting of a bypass system in the side housings that can be activated easily either via hand-operated valves or
pneumatically. In this way, the pump and piping can be drained without having to be dismounted. The amount of cleaning agent and solvent required when changing products is reduced considerably and this
greatly reduces environmental pollution.
Pump series: E-SERIES
Almatec Maschinenbau GmbH is a premium manufacturer of air-operated double-diaphragm (AODD) pumps and a company which has successfully combined a worldwide presence with proximity to the end-user.
Permanent product innovations and improvements have resulted in a large range of products and the opening up of new markets. Our extensive product range offers sophisticated and economical solutions for all
of your applications.
The standard-setting advantages of pneumatic (or air-operated) diaphragm pumps include protection against dry running and overloading, self-priming capability, infinitely control, easy start up, no rotating parts in
the product stream, solid handling capability and gentle displacement. The quality requirements of our pumps is high. Solid design, Perswing P® air control system, diaphragms and best-in-class materials are
quality features demanded by our customers
Particular attention has been paid to the form of the product chambers when designing the metal pneumatic diaphragm pumps from
Almatec. CHEMICOR pumps with a centre block made of PE conductive meet the ATEX requirements of the directive 94/9/EG.
Further features of series CHEMICOR include:
• two vertical joint faces only
• no clamping bands but tie rods
• freely rotating suction and discharge ports
• compact solid design
• patented maintenance-free air control system PERSWING® without dead centre
The ALMATEC pump series BIOCOR is especially designed for sterile applications within the pharmaceutical, biotechnical and
food industry.As demanded for in these applications all housing parts of the BIOCOR pumps have no horizontal areas and each
pump comes with four ball lifting magnets, which magnetically lift the balls off their seats so the pump can be drained entirely
without having to be dismounted. The three pump sizes B 20, B 32 and B 40 achieve max. capacities of 3.5/7.5/17 m³/h
(15.4/33/75 gpm) respectively and a max. discharge pressure of up to 7 bar (100 psig). The wetted housing parts are electro
polished 316 L stainless steel with a surface roughness of 0.4 m, and the centre block is made of conductive polyethylene.
Some of the features of the BIOCOR series include:
• Built in accordance to the essential specifications (EHEDG, 3-A, FDA, Class VI etc.)
• Integrated cleaning-system with high cleaning results
• CIP (clean in place) and SIP (sterilization in place) possible
• Sterile design: no horizontal areas
• Suction and discharge ports suitable for Tri-Clamp and other sanitary threads
ALMATEC's high-pressure diaphragm pumps made of plastic have been specially developed for charging filter presses with
chemical wastes and special sludge. With a driving pressure of max. 7 bar (100 psig), the AH series of pumps build up a delivery
pressure of 15 bar (218 psig) due to internal pressure boost. These genuine double-action pneumatic diaphragm pumps are
available in three sizes with a maximum delivery volume of 4 m³/h / 70 l/min / 18.5 gpm (AH 15), 10 m³/h / 180 l/min / 48 gpm (AH
25) and 20 m³/h / 330 l/min / 87 gpm (AH 40). All housing parts in contact with the product are made of PE UHMW which is
seven times more resistant to abrasion than Polypropylene and is also more wear resistant than iron, aluminium and some steels.
Some of the features of the series include:
• no control or safety elements required for safe operation over the entire range of capacity without over pressure
• corrosion and abrasion proof housing
• horizontal or vertical position for suction and discharge ports
• price alternative to piston-actuated diaphragm pumps and progressive cavity pumps
Since 1984 ALMATEC has manufactured specialist pumps for the chemical supply and circulation in the semiconductor industry.
The liquids handled in this industry set different demands to the pumps and the FUTUR series is available in a range of materials.
The different pump sizes achieve max. capacities between 10 and 200 l/min (2.6 - 52 gpm). The pumps have a compact, simple
design with few parts. The housing parts are machined from solid blocks, the basis for a long life time.
Some of the many features of the FUTUR series include:
four materials (T, H, E, S) for the different applications
no metal at all (T, H, E) temperature range up to 200°C/390°F (H)
patented, contactless cascade sealing between the product chambers no O-ring sealing in wetted areas straight-through flow pattern, only one wetted housing part
compact, simple design with few parts, very low space requirement
Quattroflow's positive displacement pumps incorporate four piston-diaphragm technology, with no mechanical seals, that are
driven by an eccentric shaft and electrical motor. Quattroflow products primarily serve the pharmaceutical and biotech industries
that require reliability, product safety, purity and cleanability.
The Quattroflow production program consists of four pump series:
- QF 150: This pump series is the best entry for laboratories, research centers and universities - small, portable, quiet and
scalable.
- QF 1200: A versatile tool for many applications in laboratories, pilot and production plants worldwide. Stainless steel valve plate
and new diaphragms allow inline steaming, autoclaving and easy cleaning.
- QF 4400: The QF-4400 Series is used in mid-sized crossflow systems and in chromatography systems, where gradient mixing
requires a 100:1 turndown ratio.
- QF 20K: The biggest Quattroflow pump with a max. capacity of 20000 l/h meets the requirements of high process volumes.
The pump series 150, 1200 and 4400 are also available in a "single use" version with product chambers made of plastic. The
main focus is the demand of the users for prevention of expensive and time-consuming flushing.
The E-Series represents the latest generation of plastic air-operated double diaphragm pumps made in solid design. A few of the
advantages of this pump include:
• further increased pump safety due to innovative ring-tightening structure
• increased capacity
• decreased air consumption
• reduced noise level
• optimized flow pattern
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
3636
The ALMATEC pump series BIOCOR is especially designed for sterile applications within the pharmaceutical, biotechnical and food industry. As demanded for in these applications all housing parts of the BIOCOR pumps have no horizontal areas and each pump comes with four ball lifting magnets, which magnetically lift the balls off their seats so the pump can be drained entirely without having to be dismounted.
The three pump sizes B 20, B 32 and B 40 achieve max. capacities of 3.5/7.5/17 m³/h (15.4/33/75 gpm) respectively and a max. discharge pressure of up to 7 bar (100 psig). The wetted housing parts are electro polished 316 L stainless steel with a surface roughness of 0.4 μm, and the centre block is made of conductive polyethylene. Some of the features of the BIOCOR series include:
• Built in accordance to the essential specifications (EHEDG, 3-A, FDA, Class VI etc.)
• Integrated cleaning-system with high cleaning results
• CIP (clean in place) and SIP (sterilization in place)possible
• Sterile design: no horizontal areas
• Suction and discharge ports suitable for Tri-Clamp and other sanitary threads
Since 1984 ALMATEC has manufactured specialist pumps for the chemical supply and circulation in the semiconductor industry.
The liquids handled in this industry set different demands to the pumps and the FUTUR series is available in a range of materials.
The different pump sizes achieve max. capacities between 10 and 200 l/min (2.6 - 52 gpm). The pumps have a compact, simple
design with few parts. The housing parts are machined from solid blocks, the basis for a long life time.
Some of the many features of the FUTUR series include:
• Four materials (t, h, e, s) for the different applications
• No metal at all (t, h, e)
• Temperature range up to 200°c/390°f (h)
• Patented, contactless cascade sealing between the product chambers
• No o-ring sealing in wetted areas
• Straight-through flow pattern, only one wetted housing part
• Compact, simple design with few parts, very low space requirement
aoDD pumpsALMAteC
BIOCOr
FUtUr
E-Series
CHEMICOR
BIOCOR
FUTUR
AH
CX
QUATTROFLOW
The CX series diaphragm pumps are used as general-purpose pumps for low to medium duty and also as drum pumps. They are
used to empty containers down to the very last drop and can therefore be used for complete and unattended transfer of liquids from
one container to another. The series comprises four pump sizes with maximum delivery volumes of 10, 20, 50 and 130 l/min (2.6, 5.3,
13.2 and 34 gpm). The housings are made of solid PE conductive for the use in explosion-protected areas.
Further features of series CX at a glance:
• with ball or cylinder valves
• composite diaphragms with integrated metal core
• metal free outer surface
• variable position of suction and discharge port
• handle recess with drainage
Options
A variety of optional equipment is available to allow for a precise set-up to your specific application.
Pulsation Damper
If a virtually uniform flow is needed, pulsation dampers in different versions are available.
Pump series: E-SERIES, CHEMICOR, BIOCOR, FUTUR
Barrier Chamber System
The ALMATEC barrier chamber system meets high safety requirements. The individual diaphragm is replaced by two diaphragms arranged in tandem with a barrier chamber of conductive PE between them and
filled with non-conductive liquid. A change in conductivity of the barrier liquid is detected by sensors and signalled to a controller, which triggers an alarm or disconnects the pump.
Pump series: E-SERIES, CHEMICOR, BIOCOR
Stroke Counting
ALMATEC air-operated diaphragm pumps can be used continuously (24h operation) or intermittently for hours, minutes or for an exact defined number of strokes. To accurately count the strokes a sensor can be
installed in the pump's center housing (available as pneumatic version also).
Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR
Diaphragm Monitoring
A capacitive sensor installed in the pump muffler detects the presence of liquids and in case of a diaphragm rupture it relays a corresponding signal to a controller that triggers an alarm or disconnects the pump via
a connected solenoid valve.
Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR
Flange Connection
According to recognized industry safety standards, all E-SERIES pump sizes from E 15 to E 80 can be equipped with thread bushings and flange-O-rings for flange connections to DIN or ANSI / PN 10.
Pump series: E-SERIES
Draining System
The E-SERIES pumps in sizes 15 to 50 are available with a special ALMATEC draining system consisting of a bypass system in the side housings that can be activated easily either via hand-operated valves or
pneumatically. In this way, the pump and piping can be drained without having to be dismounted. The amount of cleaning agent and solvent required when changing products is reduced considerably and this
greatly reduces environmental pollution.
Pump series: E-SERIES
Almatec Maschinenbau GmbH is a premium manufacturer of air-operated double-diaphragm (AODD) pumps and a company which has successfully combined a worldwide presence with proximity to the end-user.
Permanent product innovations and improvements have resulted in a large range of products and the opening up of new markets. Our extensive product range offers sophisticated and economical solutions for all
of your applications.
The standard-setting advantages of pneumatic (or air-operated) diaphragm pumps include protection against dry running and overloading, self-priming capability, infinitely control, easy start up, no rotating parts in
the product stream, solid handling capability and gentle displacement. The quality requirements of our pumps is high. Solid design, Perswing P® air control system, diaphragms and best-in-class materials are
quality features demanded by our customers
Particular attention has been paid to the form of the product chambers when designing the metal pneumatic diaphragm pumps from
Almatec. CHEMICOR pumps with a centre block made of PE conductive meet the ATEX requirements of the directive 94/9/EG.
Further features of series CHEMICOR include:
• two vertical joint faces only
• no clamping bands but tie rods
• freely rotating suction and discharge ports
• compact solid design
• patented maintenance-free air control system PERSWING® without dead centre
The ALMATEC pump series BIOCOR is especially designed for sterile applications within the pharmaceutical, biotechnical and
food industry.As demanded for in these applications all housing parts of the BIOCOR pumps have no horizontal areas and each
pump comes with four ball lifting magnets, which magnetically lift the balls off their seats so the pump can be drained entirely
without having to be dismounted. The three pump sizes B 20, B 32 and B 40 achieve max. capacities of 3.5/7.5/17 m³/h
(15.4/33/75 gpm) respectively and a max. discharge pressure of up to 7 bar (100 psig). The wetted housing parts are electro
polished 316 L stainless steel with a surface roughness of 0.4 m, and the centre block is made of conductive polyethylene.
Some of the features of the BIOCOR series include:
• Built in accordance to the essential specifications (EHEDG, 3-A, FDA, Class VI etc.)
• Integrated cleaning-system with high cleaning results
• CIP (clean in place) and SIP (sterilization in place) possible
• Sterile design: no horizontal areas
• Suction and discharge ports suitable for Tri-Clamp and other sanitary threads
ALMATEC's high-pressure diaphragm pumps made of plastic have been specially developed for charging filter presses with
chemical wastes and special sludge. With a driving pressure of max. 7 bar (100 psig), the AH series of pumps build up a delivery
pressure of 15 bar (218 psig) due to internal pressure boost. These genuine double-action pneumatic diaphragm pumps are
available in three sizes with a maximum delivery volume of 4 m³/h / 70 l/min / 18.5 gpm (AH 15), 10 m³/h / 180 l/min / 48 gpm (AH
25) and 20 m³/h / 330 l/min / 87 gpm (AH 40). All housing parts in contact with the product are made of PE UHMW which is
seven times more resistant to abrasion than Polypropylene and is also more wear resistant than iron, aluminium and some steels.
Some of the features of the series include:
• no control or safety elements required for safe operation over the entire range of capacity without over pressure
• corrosion and abrasion proof housing
• horizontal or vertical position for suction and discharge ports
• price alternative to piston-actuated diaphragm pumps and progressive cavity pumps
Since 1984 ALMATEC has manufactured specialist pumps for the chemical supply and circulation in the semiconductor industry.
The liquids handled in this industry set different demands to the pumps and the FUTUR series is available in a range of materials.
The different pump sizes achieve max. capacities between 10 and 200 l/min (2.6 - 52 gpm). The pumps have a compact, simple
design with few parts. The housing parts are machined from solid blocks, the basis for a long life time.
Some of the many features of the FUTUR series include:
four materials (T, H, E, S) for the different applications
no metal at all (T, H, E) temperature range up to 200°C/390°F (H)
patented, contactless cascade sealing between the product chambers no O-ring sealing in wetted areas straight-through flow pattern, only one wetted housing part
compact, simple design with few parts, very low space requirement
Quattroflow's positive displacement pumps incorporate four piston-diaphragm technology, with no mechanical seals, that are
driven by an eccentric shaft and electrical motor. Quattroflow products primarily serve the pharmaceutical and biotech industries
that require reliability, product safety, purity and cleanability.
The Quattroflow production program consists of four pump series:
- QF 150: This pump series is the best entry for laboratories, research centers and universities - small, portable, quiet and
scalable.
- QF 1200: A versatile tool for many applications in laboratories, pilot and production plants worldwide. Stainless steel valve plate
and new diaphragms allow inline steaming, autoclaving and easy cleaning.
- QF 4400: The QF-4400 Series is used in mid-sized crossflow systems and in chromatography systems, where gradient mixing
requires a 100:1 turndown ratio.
- QF 20K: The biggest Quattroflow pump with a max. capacity of 20000 l/h meets the requirements of high process volumes.
The pump series 150, 1200 and 4400 are also available in a "single use" version with product chambers made of plastic. The
main focus is the demand of the users for prevention of expensive and time-consuming flushing.
The E-Series represents the latest generation of plastic air-operated double diaphragm pumps made in solid design. A few of the
advantages of this pump include:
• further increased pump safety due to innovative ring-tightening structure
• increased capacity
• decreased air consumption
• reduced noise level
• optimized flow pattern
E-Series
CHEMICOR
BIOCOR
FUTUR
AH
CX
QUATTROFLOW
The CX series diaphragm pumps are used as general-purpose pumps for low to medium duty and also as drum pumps. They are
used to empty containers down to the very last drop and can therefore be used for complete and unattended transfer of liquids from
one container to another. The series comprises four pump sizes with maximum delivery volumes of 10, 20, 50 and 130 l/min (2.6, 5.3,
13.2 and 34 gpm). The housings are made of solid PE conductive for the use in explosion-protected areas.
Further features of series CX at a glance:
• with ball or cylinder valves
• composite diaphragms with integrated metal core
• metal free outer surface
• variable position of suction and discharge port
• handle recess with drainage
Options
A variety of optional equipment is available to allow for a precise set-up to your specific application.
Pulsation Damper
If a virtually uniform flow is needed, pulsation dampers in different versions are available.
Pump series: E-SERIES, CHEMICOR, BIOCOR, FUTUR
Barrier Chamber System
The ALMATEC barrier chamber system meets high safety requirements. The individual diaphragm is replaced by two diaphragms arranged in tandem with a barrier chamber of conductive PE between them and
filled with non-conductive liquid. A change in conductivity of the barrier liquid is detected by sensors and signalled to a controller, which triggers an alarm or disconnects the pump.
Pump series: E-SERIES, CHEMICOR, BIOCOR
Stroke Counting
ALMATEC air-operated diaphragm pumps can be used continuously (24h operation) or intermittently for hours, minutes or for an exact defined number of strokes. To accurately count the strokes a sensor can be
installed in the pump's center housing (available as pneumatic version also).
Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR
Diaphragm Monitoring
A capacitive sensor installed in the pump muffler detects the presence of liquids and in case of a diaphragm rupture it relays a corresponding signal to a controller that triggers an alarm or disconnects the pump via
a connected solenoid valve.
Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR
Flange Connection
According to recognized industry safety standards, all E-SERIES pump sizes from E 15 to E 80 can be equipped with thread bushings and flange-O-rings for flange connections to DIN or ANSI / PN 10.
Pump series: E-SERIES
Draining System
The E-SERIES pumps in sizes 15 to 50 are available with a special ALMATEC draining system consisting of a bypass system in the side housings that can be activated easily either via hand-operated valves or
pneumatically. In this way, the pump and piping can be drained without having to be dismounted. The amount of cleaning agent and solvent required when changing products is reduced considerably and this
greatly reduces environmental pollution.
Pump series: E-SERIES
Almatec Maschinenbau GmbH is a premium manufacturer of air-operated double-diaphragm (AODD) pumps and a company which has successfully combined a worldwide presence with proximity to the end-user.
Permanent product innovations and improvements have resulted in a large range of products and the opening up of new markets. Our extensive product range offers sophisticated and economical solutions for all
of your applications.
The standard-setting advantages of pneumatic (or air-operated) diaphragm pumps include protection against dry running and overloading, self-priming capability, infinitely control, easy start up, no rotating parts in
the product stream, solid handling capability and gentle displacement. The quality requirements of our pumps is high. Solid design, Perswing P® air control system, diaphragms and best-in-class materials are
quality features demanded by our customers
Particular attention has been paid to the form of the product chambers when designing the metal pneumatic diaphragm pumps from
Almatec. CHEMICOR pumps with a centre block made of PE conductive meet the ATEX requirements of the directive 94/9/EG.
Further features of series CHEMICOR include:
• two vertical joint faces only
• no clamping bands but tie rods
• freely rotating suction and discharge ports
• compact solid design
• patented maintenance-free air control system PERSWING® without dead centre
The ALMATEC pump series BIOCOR is especially designed for sterile applications within the pharmaceutical, biotechnical and
food industry.As demanded for in these applications all housing parts of the BIOCOR pumps have no horizontal areas and each
pump comes with four ball lifting magnets, which magnetically lift the balls off their seats so the pump can be drained entirely
without having to be dismounted. The three pump sizes B 20, B 32 and B 40 achieve max. capacities of 3.5/7.5/17 m³/h
(15.4/33/75 gpm) respectively and a max. discharge pressure of up to 7 bar (100 psig). The wetted housing parts are electro
polished 316 L stainless steel with a surface roughness of 0.4 m, and the centre block is made of conductive polyethylene.
Some of the features of the BIOCOR series include:
• Built in accordance to the essential specifications (EHEDG, 3-A, FDA, Class VI etc.)
• Integrated cleaning-system with high cleaning results
• CIP (clean in place) and SIP (sterilization in place) possible
• Sterile design: no horizontal areas
• Suction and discharge ports suitable for Tri-Clamp and other sanitary threads
ALMATEC's high-pressure diaphragm pumps made of plastic have been specially developed for charging filter presses with
chemical wastes and special sludge. With a driving pressure of max. 7 bar (100 psig), the AH series of pumps build up a delivery
pressure of 15 bar (218 psig) due to internal pressure boost. These genuine double-action pneumatic diaphragm pumps are
available in three sizes with a maximum delivery volume of 4 m³/h / 70 l/min / 18.5 gpm (AH 15), 10 m³/h / 180 l/min / 48 gpm (AH
25) and 20 m³/h / 330 l/min / 87 gpm (AH 40). All housing parts in contact with the product are made of PE UHMW which is
seven times more resistant to abrasion than Polypropylene and is also more wear resistant than iron, aluminium and some steels.
Some of the features of the series include:
• no control or safety elements required for safe operation over the entire range of capacity without over pressure
• corrosion and abrasion proof housing
• horizontal or vertical position for suction and discharge ports
• price alternative to piston-actuated diaphragm pumps and progressive cavity pumps
Since 1984 ALMATEC has manufactured specialist pumps for the chemical supply and circulation in the semiconductor industry.
The liquids handled in this industry set different demands to the pumps and the FUTUR series is available in a range of materials.
The different pump sizes achieve max. capacities between 10 and 200 l/min (2.6 - 52 gpm). The pumps have a compact, simple
design with few parts. The housing parts are machined from solid blocks, the basis for a long life time.
Some of the many features of the FUTUR series include:
four materials (T, H, E, S) for the different applications
no metal at all (T, H, E) temperature range up to 200°C/390°F (H)
patented, contactless cascade sealing between the product chambers no O-ring sealing in wetted areas straight-through flow pattern, only one wetted housing part
compact, simple design with few parts, very low space requirement
Quattroflow's positive displacement pumps incorporate four piston-diaphragm technology, with no mechanical seals, that are
driven by an eccentric shaft and electrical motor. Quattroflow products primarily serve the pharmaceutical and biotech industries
that require reliability, product safety, purity and cleanability.
The Quattroflow production program consists of four pump series:
- QF 150: This pump series is the best entry for laboratories, research centers and universities - small, portable, quiet and
scalable.
- QF 1200: A versatile tool for many applications in laboratories, pilot and production plants worldwide. Stainless steel valve plate
and new diaphragms allow inline steaming, autoclaving and easy cleaning.
- QF 4400: The QF-4400 Series is used in mid-sized crossflow systems and in chromatography systems, where gradient mixing
requires a 100:1 turndown ratio.
- QF 20K: The biggest Quattroflow pump with a max. capacity of 20000 l/h meets the requirements of high process volumes.
The pump series 150, 1200 and 4400 are also available in a "single use" version with product chambers made of plastic. The
main focus is the demand of the users for prevention of expensive and time-consuming flushing.
The E-Series represents the latest generation of plastic air-operated double diaphragm pumps made in solid design. A few of the
advantages of this pump include:
• further increased pump safety due to innovative ring-tightening structure
• increased capacity
• decreased air consumption
• reduced noise level
• optimized flow pattern
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
37AO
DD P
UMPS
ALMATEC's high-pressure diaphragm pumps made of plastic have been specially developed for charging filter presses with chemical wastes and special sludge. With a driving pressure of max. 7 bar (100 psig), the AH series of pumps build up a delivery pressure of 15 bar (218 psig) due to internal pressure boost. These genuine double-action pneumatic diaphragm pumps are available in three sizes with a maximum delivery volume of 4 m³/h / 70 l/min / 18.5 gpm (AH 15), 10 m³/h / 180 l/min / 48 gpm (AH 25) and 20 m³/h / 330 l/min / 87 gpm (AH 40). All housing parts in contact with the product are made of PE UHMW which is seven times more resistant to abrasion than Polypropylene and is also more wear resistant than iron, aluminium and some steels.
Some of the features of the series include:
• No control or safety elements required for safe operation over the entire range of capacity without over pressure
• Corrosion and abrasion proof housing
• Horizontal or vertical position for suction and discharge ports
• Price alternative to piston-actuated diaphragm pumps and progressive cavity pumps
The CX series diaphragm pumps are used as general-purpose pumps for low to medium duty and also as drum pumps. They are
used to empty containers down to the very last drop and can therefore be used for complete and unattended transfer of liquids from
one container to another. The series comprises four pump sizes with maximum delivery volumes of 10, 20, 50 and 130 l/min (2.6, 5.3,
13.2 and 34 gpm). The housings are made of solid PE conductive for the use in explosion-protected areas.
Further features of series CX at a glance:
• With ball or cylinder valves
• Composite diaphragms with integrated metal core
• Metal free outer surface
• Variable position of suction and discharge port
• Handle recess with drainage
aoDD pumpsALMAteC
AH
CX
E-Series
CHEMICOR
BIOCOR
FUTUR
AH
CX
QUATTROFLOW
The CX series diaphragm pumps are used as general-purpose pumps for low to medium duty and also as drum pumps. They are
used to empty containers down to the very last drop and can therefore be used for complete and unattended transfer of liquids from
one container to another. The series comprises four pump sizes with maximum delivery volumes of 10, 20, 50 and 130 l/min (2.6, 5.3,
13.2 and 34 gpm). The housings are made of solid PE conductive for the use in explosion-protected areas.
Further features of series CX at a glance:
• with ball or cylinder valves
• composite diaphragms with integrated metal core
• metal free outer surface
• variable position of suction and discharge port
• handle recess with drainage
Options
A variety of optional equipment is available to allow for a precise set-up to your specific application.
Pulsation Damper
If a virtually uniform flow is needed, pulsation dampers in different versions are available.
Pump series: E-SERIES, CHEMICOR, BIOCOR, FUTUR
Barrier Chamber System
The ALMATEC barrier chamber system meets high safety requirements. The individual diaphragm is replaced by two diaphragms arranged in tandem with a barrier chamber of conductive PE between them and
filled with non-conductive liquid. A change in conductivity of the barrier liquid is detected by sensors and signalled to a controller, which triggers an alarm or disconnects the pump.
Pump series: E-SERIES, CHEMICOR, BIOCOR
Stroke Counting
ALMATEC air-operated diaphragm pumps can be used continuously (24h operation) or intermittently for hours, minutes or for an exact defined number of strokes. To accurately count the strokes a sensor can be
installed in the pump's center housing (available as pneumatic version also).
Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR
Diaphragm Monitoring
A capacitive sensor installed in the pump muffler detects the presence of liquids and in case of a diaphragm rupture it relays a corresponding signal to a controller that triggers an alarm or disconnects the pump via
a connected solenoid valve.
Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR
Flange Connection
According to recognized industry safety standards, all E-SERIES pump sizes from E 15 to E 80 can be equipped with thread bushings and flange-O-rings for flange connections to DIN or ANSI / PN 10.
Pump series: E-SERIES
Draining System
The E-SERIES pumps in sizes 15 to 50 are available with a special ALMATEC draining system consisting of a bypass system in the side housings that can be activated easily either via hand-operated valves or
pneumatically. In this way, the pump and piping can be drained without having to be dismounted. The amount of cleaning agent and solvent required when changing products is reduced considerably and this
greatly reduces environmental pollution.
Pump series: E-SERIES
Almatec Maschinenbau GmbH is a premium manufacturer of air-operated double-diaphragm (AODD) pumps and a company which has successfully combined a worldwide presence with proximity to the end-user.
Permanent product innovations and improvements have resulted in a large range of products and the opening up of new markets. Our extensive product range offers sophisticated and economical solutions for all
of your applications.
The standard-setting advantages of pneumatic (or air-operated) diaphragm pumps include protection against dry running and overloading, self-priming capability, infinitely control, easy start up, no rotating parts in
the product stream, solid handling capability and gentle displacement. The quality requirements of our pumps is high. Solid design, Perswing P® air control system, diaphragms and best-in-class materials are
quality features demanded by our customers
Particular attention has been paid to the form of the product chambers when designing the metal pneumatic diaphragm pumps from
Almatec. CHEMICOR pumps with a centre block made of PE conductive meet the ATEX requirements of the directive 94/9/EG.
Further features of series CHEMICOR include:
• two vertical joint faces only
• no clamping bands but tie rods
• freely rotating suction and discharge ports
• compact solid design
• patented maintenance-free air control system PERSWING® without dead centre
The ALMATEC pump series BIOCOR is especially designed for sterile applications within the pharmaceutical, biotechnical and
food industry.As demanded for in these applications all housing parts of the BIOCOR pumps have no horizontal areas and each
pump comes with four ball lifting magnets, which magnetically lift the balls off their seats so the pump can be drained entirely
without having to be dismounted. The three pump sizes B 20, B 32 and B 40 achieve max. capacities of 3.5/7.5/17 m³/h
(15.4/33/75 gpm) respectively and a max. discharge pressure of up to 7 bar (100 psig). The wetted housing parts are electro
polished 316 L stainless steel with a surface roughness of 0.4 m, and the centre block is made of conductive polyethylene.
Some of the features of the BIOCOR series include:
• Built in accordance to the essential specifications (EHEDG, 3-A, FDA, Class VI etc.)
• Integrated cleaning-system with high cleaning results
• CIP (clean in place) and SIP (sterilization in place) possible
• Sterile design: no horizontal areas
• Suction and discharge ports suitable for Tri-Clamp and other sanitary threads
ALMATEC's high-pressure diaphragm pumps made of plastic have been specially developed for charging filter presses with
chemical wastes and special sludge. With a driving pressure of max. 7 bar (100 psig), the AH series of pumps build up a delivery
pressure of 15 bar (218 psig) due to internal pressure boost. These genuine double-action pneumatic diaphragm pumps are
available in three sizes with a maximum delivery volume of 4 m³/h / 70 l/min / 18.5 gpm (AH 15), 10 m³/h / 180 l/min / 48 gpm (AH
25) and 20 m³/h / 330 l/min / 87 gpm (AH 40). All housing parts in contact with the product are made of PE UHMW which is
seven times more resistant to abrasion than Polypropylene and is also more wear resistant than iron, aluminium and some steels.
Some of the features of the series include:
• no control or safety elements required for safe operation over the entire range of capacity without over pressure
• corrosion and abrasion proof housing
• horizontal or vertical position for suction and discharge ports
• price alternative to piston-actuated diaphragm pumps and progressive cavity pumps
Since 1984 ALMATEC has manufactured specialist pumps for the chemical supply and circulation in the semiconductor industry.
The liquids handled in this industry set different demands to the pumps and the FUTUR series is available in a range of materials.
The different pump sizes achieve max. capacities between 10 and 200 l/min (2.6 - 52 gpm). The pumps have a compact, simple
design with few parts. The housing parts are machined from solid blocks, the basis for a long life time.
Some of the many features of the FUTUR series include:
four materials (T, H, E, S) for the different applications
no metal at all (T, H, E) temperature range up to 200°C/390°F (H)
patented, contactless cascade sealing between the product chambers no O-ring sealing in wetted areas straight-through flow pattern, only one wetted housing part
compact, simple design with few parts, very low space requirement
Quattroflow's positive displacement pumps incorporate four piston-diaphragm technology, with no mechanical seals, that are
driven by an eccentric shaft and electrical motor. Quattroflow products primarily serve the pharmaceutical and biotech industries
that require reliability, product safety, purity and cleanability.
The Quattroflow production program consists of four pump series:
- QF 150: This pump series is the best entry for laboratories, research centers and universities - small, portable, quiet and
scalable.
- QF 1200: A versatile tool for many applications in laboratories, pilot and production plants worldwide. Stainless steel valve plate
and new diaphragms allow inline steaming, autoclaving and easy cleaning.
- QF 4400: The QF-4400 Series is used in mid-sized crossflow systems and in chromatography systems, where gradient mixing
requires a 100:1 turndown ratio.
- QF 20K: The biggest Quattroflow pump with a max. capacity of 20000 l/h meets the requirements of high process volumes.
The pump series 150, 1200 and 4400 are also available in a "single use" version with product chambers made of plastic. The
main focus is the demand of the users for prevention of expensive and time-consuming flushing.
The E-Series represents the latest generation of plastic air-operated double diaphragm pumps made in solid design. A few of the
advantages of this pump include:
• further increased pump safety due to innovative ring-tightening structure
• increased capacity
• decreased air consumption
• reduced noise level
• optimized flow pattern
E-Series
CHEMICOR
BIOCOR
FUTUR
AH
CX
QUATTROFLOW
The CX series diaphragm pumps are used as general-purpose pumps for low to medium duty and also as drum pumps. They are
used to empty containers down to the very last drop and can therefore be used for complete and unattended transfer of liquids from
one container to another. The series comprises four pump sizes with maximum delivery volumes of 10, 20, 50 and 130 l/min (2.6, 5.3,
13.2 and 34 gpm). The housings are made of solid PE conductive for the use in explosion-protected areas.
Further features of series CX at a glance:
• with ball or cylinder valves
• composite diaphragms with integrated metal core
• metal free outer surface
• variable position of suction and discharge port
• handle recess with drainage
Options
A variety of optional equipment is available to allow for a precise set-up to your specific application.
Pulsation Damper
If a virtually uniform flow is needed, pulsation dampers in different versions are available.
Pump series: E-SERIES, CHEMICOR, BIOCOR, FUTUR
Barrier Chamber System
The ALMATEC barrier chamber system meets high safety requirements. The individual diaphragm is replaced by two diaphragms arranged in tandem with a barrier chamber of conductive PE between them and
filled with non-conductive liquid. A change in conductivity of the barrier liquid is detected by sensors and signalled to a controller, which triggers an alarm or disconnects the pump.
Pump series: E-SERIES, CHEMICOR, BIOCOR
Stroke Counting
ALMATEC air-operated diaphragm pumps can be used continuously (24h operation) or intermittently for hours, minutes or for an exact defined number of strokes. To accurately count the strokes a sensor can be
installed in the pump's center housing (available as pneumatic version also).
Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR
Diaphragm Monitoring
A capacitive sensor installed in the pump muffler detects the presence of liquids and in case of a diaphragm rupture it relays a corresponding signal to a controller that triggers an alarm or disconnects the pump via
a connected solenoid valve.
Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR
Flange Connection
According to recognized industry safety standards, all E-SERIES pump sizes from E 15 to E 80 can be equipped with thread bushings and flange-O-rings for flange connections to DIN or ANSI / PN 10.
Pump series: E-SERIES
Draining System
The E-SERIES pumps in sizes 15 to 50 are available with a special ALMATEC draining system consisting of a bypass system in the side housings that can be activated easily either via hand-operated valves or
pneumatically. In this way, the pump and piping can be drained without having to be dismounted. The amount of cleaning agent and solvent required when changing products is reduced considerably and this
greatly reduces environmental pollution.
Pump series: E-SERIES
Almatec Maschinenbau GmbH is a premium manufacturer of air-operated double-diaphragm (AODD) pumps and a company which has successfully combined a worldwide presence with proximity to the end-user.
Permanent product innovations and improvements have resulted in a large range of products and the opening up of new markets. Our extensive product range offers sophisticated and economical solutions for all
of your applications.
The standard-setting advantages of pneumatic (or air-operated) diaphragm pumps include protection against dry running and overloading, self-priming capability, infinitely control, easy start up, no rotating parts in
the product stream, solid handling capability and gentle displacement. The quality requirements of our pumps is high. Solid design, Perswing P® air control system, diaphragms and best-in-class materials are
quality features demanded by our customers
Particular attention has been paid to the form of the product chambers when designing the metal pneumatic diaphragm pumps from
Almatec. CHEMICOR pumps with a centre block made of PE conductive meet the ATEX requirements of the directive 94/9/EG.
Further features of series CHEMICOR include:
• two vertical joint faces only
• no clamping bands but tie rods
• freely rotating suction and discharge ports
• compact solid design
• patented maintenance-free air control system PERSWING® without dead centre
The ALMATEC pump series BIOCOR is especially designed for sterile applications within the pharmaceutical, biotechnical and
food industry.As demanded for in these applications all housing parts of the BIOCOR pumps have no horizontal areas and each
pump comes with four ball lifting magnets, which magnetically lift the balls off their seats so the pump can be drained entirely
without having to be dismounted. The three pump sizes B 20, B 32 and B 40 achieve max. capacities of 3.5/7.5/17 m³/h
(15.4/33/75 gpm) respectively and a max. discharge pressure of up to 7 bar (100 psig). The wetted housing parts are electro
polished 316 L stainless steel with a surface roughness of 0.4 m, and the centre block is made of conductive polyethylene.
Some of the features of the BIOCOR series include:
• Built in accordance to the essential specifications (EHEDG, 3-A, FDA, Class VI etc.)
• Integrated cleaning-system with high cleaning results
• CIP (clean in place) and SIP (sterilization in place) possible
• Sterile design: no horizontal areas
• Suction and discharge ports suitable for Tri-Clamp and other sanitary threads
ALMATEC's high-pressure diaphragm pumps made of plastic have been specially developed for charging filter presses with
chemical wastes and special sludge. With a driving pressure of max. 7 bar (100 psig), the AH series of pumps build up a delivery
pressure of 15 bar (218 psig) due to internal pressure boost. These genuine double-action pneumatic diaphragm pumps are
available in three sizes with a maximum delivery volume of 4 m³/h / 70 l/min / 18.5 gpm (AH 15), 10 m³/h / 180 l/min / 48 gpm (AH
25) and 20 m³/h / 330 l/min / 87 gpm (AH 40). All housing parts in contact with the product are made of PE UHMW which is
seven times more resistant to abrasion than Polypropylene and is also more wear resistant than iron, aluminium and some steels.
Some of the features of the series include:
• no control or safety elements required for safe operation over the entire range of capacity without over pressure
• corrosion and abrasion proof housing
• horizontal or vertical position for suction and discharge ports
• price alternative to piston-actuated diaphragm pumps and progressive cavity pumps
Since 1984 ALMATEC has manufactured specialist pumps for the chemical supply and circulation in the semiconductor industry.
The liquids handled in this industry set different demands to the pumps and the FUTUR series is available in a range of materials.
The different pump sizes achieve max. capacities between 10 and 200 l/min (2.6 - 52 gpm). The pumps have a compact, simple
design with few parts. The housing parts are machined from solid blocks, the basis for a long life time.
Some of the many features of the FUTUR series include:
four materials (T, H, E, S) for the different applications
no metal at all (T, H, E) temperature range up to 200°C/390°F (H)
patented, contactless cascade sealing between the product chambers no O-ring sealing in wetted areas straight-through flow pattern, only one wetted housing part
compact, simple design with few parts, very low space requirement
Quattroflow's positive displacement pumps incorporate four piston-diaphragm technology, with no mechanical seals, that are
driven by an eccentric shaft and electrical motor. Quattroflow products primarily serve the pharmaceutical and biotech industries
that require reliability, product safety, purity and cleanability.
The Quattroflow production program consists of four pump series:
- QF 150: This pump series is the best entry for laboratories, research centers and universities - small, portable, quiet and
scalable.
- QF 1200: A versatile tool for many applications in laboratories, pilot and production plants worldwide. Stainless steel valve plate
and new diaphragms allow inline steaming, autoclaving and easy cleaning.
- QF 4400: The QF-4400 Series is used in mid-sized crossflow systems and in chromatography systems, where gradient mixing
requires a 100:1 turndown ratio.
- QF 20K: The biggest Quattroflow pump with a max. capacity of 20000 l/h meets the requirements of high process volumes.
The pump series 150, 1200 and 4400 are also available in a "single use" version with product chambers made of plastic. The
main focus is the demand of the users for prevention of expensive and time-consuming flushing.
The E-Series represents the latest generation of plastic air-operated double diaphragm pumps made in solid design. A few of the
advantages of this pump include:
• further increased pump safety due to innovative ring-tightening structure
• increased capacity
• decreased air consumption
• reduced noise level
• optimized flow pattern
1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS
3838
E-Series
CHEMICOR
BIOCOR
FUTUR
AH
CX
QUATTROFLOW
The CX series diaphragm pumps are used as general-purpose pumps for low to medium duty and also as drum pumps. They are
used to empty containers down to the very last drop and can therefore be used for complete and unattended transfer of liquids from
one container to another. The series comprises four pump sizes with maximum delivery volumes of 10, 20, 50 and 130 l/min (2.6, 5.3,
13.2 and 34 gpm). The housings are made of solid PE conductive for the use in explosion-protected areas.
Further features of series CX at a glance:
• with ball or cylinder valves
• composite diaphragms with integrated metal core
• metal free outer surface
• variable position of suction and discharge port
• handle recess with drainage
Options
A variety of optional equipment is available to allow for a precise set-up to your specific application.
Pulsation Damper
If a virtually uniform flow is needed, pulsation dampers in different versions are available.
Pump series: E-SERIES, CHEMICOR, BIOCOR, FUTUR
Barrier Chamber System
The ALMATEC barrier chamber system meets high safety requirements. The individual diaphragm is replaced by two diaphragms arranged in tandem with a barrier chamber of conductive PE between them and
filled with non-conductive liquid. A change in conductivity of the barrier liquid is detected by sensors and signalled to a controller, which triggers an alarm or disconnects the pump.
Pump series: E-SERIES, CHEMICOR, BIOCOR
Stroke Counting
ALMATEC air-operated diaphragm pumps can be used continuously (24h operation) or intermittently for hours, minutes or for an exact defined number of strokes. To accurately count the strokes a sensor can be
installed in the pump's center housing (available as pneumatic version also).
Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR
Diaphragm Monitoring
A capacitive sensor installed in the pump muffler detects the presence of liquids and in case of a diaphragm rupture it relays a corresponding signal to a controller that triggers an alarm or disconnects the pump via
a connected solenoid valve.
Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR
Flange Connection
According to recognized industry safety standards, all E-SERIES pump sizes from E 15 to E 80 can be equipped with thread bushings and flange-O-rings for flange connections to DIN or ANSI / PN 10.
Pump series: E-SERIES
Draining System
The E-SERIES pumps in sizes 15 to 50 are available with a special ALMATEC draining system consisting of a bypass system in the side housings that can be activated easily either via hand-operated valves or
pneumatically. In this way, the pump and piping can be drained without having to be dismounted. The amount of cleaning agent and solvent required when changing products is reduced considerably and this
greatly reduces environmental pollution.
Pump series: E-SERIES
Almatec Maschinenbau GmbH is a premium manufacturer of air-operated double-diaphragm (AODD) pumps and a company which has successfully combined a worldwide presence with proximity to the end-user.
Permanent product innovations and improvements have resulted in a large range of products and the opening up of new markets. Our extensive product range offers sophisticated and economical solutions for all
of your applications.
The standard-setting advantages of pneumatic (or air-operated) diaphragm pumps include protection against dry running and overloading, self-priming capability, infinitely control, easy start up, no rotating parts in
the product stream, solid handling capability and gentle displacement. The quality requirements of our pumps is high. Solid design, Perswing P® air control system, diaphragms and best-in-class materials are
quality features demanded by our customers
Particular attention has been paid to the form of the product chambers when designing the metal pneumatic diaphragm pumps from
Almatec. CHEMICOR pumps with a centre block made of PE conductive meet the ATEX requirements of the directive 94/9/EG.
Further features of series CHEMICOR include:
• two vertical joint faces only
• no clamping bands but tie rods
• freely rotating suction and discharge ports
• compact solid design
• patented maintenance-free air control system PERSWING® without dead centre
The ALMATEC pump series BIOCOR is especially designed for sterile applications within the pharmaceutical, biotechnical and
food industry.As demanded for in these applications all housing parts of the BIOCOR pumps have no horizontal areas and each
pump comes with four ball lifting magnets, which magnetically lift the balls off their seats so the pump can be drained entirely
without having to be dismounted. The three pump sizes B 20, B 32 and B 40 achieve max. capacities of 3.5/7.5/17 m³/h
(15.4/33/75 gpm) respectively and a max. discharge pressure of up to 7 bar (100 psig). The wetted housing parts are electro
polished 316 L stainless steel with a surface roughness of 0.4 m, and the centre block is made of conductive polyethylene.
Some of the features of the BIOCOR series include:
• Built in accordance to the essential specifications (EHEDG, 3-A, FDA, Class VI etc.)
• Integrated cleaning-system with high cleaning results
• CIP (clean in place) and SIP (sterilization in place) possible
• Sterile design: no horizontal areas
• Suction and discharge ports suitable for Tri-Clamp and other sanitary threads
ALMATEC's high-pressure diaphragm pumps made of plastic have been specially developed for charging filter presses with
chemical wastes and special sludge. With a driving pressure of max. 7 bar (100 psig), the AH series of pumps build up a delivery
pressure of 15 bar (218 psig) due to internal pressure boost. These genuine double-action pneumatic diaphragm pumps are
available in three sizes with a maximum delivery volume of 4 m³/h / 70 l/min / 18.5 gpm (AH 15), 10 m³/h / 180 l/min / 48 gpm (AH
25) and 20 m³/h / 330 l/min / 87 gpm (AH 40). All housing parts in contact with the product are made of PE UHMW which is
seven times more resistant to abrasion than Polypropylene and is also more wear resistant than iron, aluminium and some steels.
Some of the features of the series include:
• no control or safety elements required for safe operation over the entire range of capacity without over pressure
• corrosion and abrasion proof housing
• horizontal or vertical position for suction and discharge ports
• price alternative to piston-actuated diaphragm pumps and progressive cavity pumps
Since 1984 ALMATEC has manufactured specialist pumps for the chemical supply and circulation in the semiconductor industry.
The liquids handled in this industry set different demands to the pumps and the FUTUR series is available in a range of materials.
The different pump sizes achieve max. capacities between 10 and 200 l/min (2.6 - 52 gpm). The pumps have a compact, simple
design with few parts. The housing parts are machined from solid blocks, the basis for a long life time.
Some of the many features of the FUTUR series include:
four materials (T, H, E, S) for the different applications
no metal at all (T, H, E) temperature range up to 200°C/390°F (H)
patented, contactless cascade sealing between the product chambers no O-ring sealing in wetted areas straight-through flow pattern, only one wetted housing part
compact, simple design with few parts, very low space requirement
Quattroflow's positive displacement pumps incorporate four piston-diaphragm technology, with no mechanical seals, that are
driven by an eccentric shaft and electrical motor. Quattroflow products primarily serve the pharmaceutical and biotech industries
that require reliability, product safety, purity and cleanability.
The Quattroflow production program consists of four pump series:
- QF 150: This pump series is the best entry for laboratories, research centers and universities - small, portable, quiet and
scalable.
- QF 1200: A versatile tool for many applications in laboratories, pilot and production plants worldwide. Stainless steel valve plate
and new diaphragms allow inline steaming, autoclaving and easy cleaning.
- QF 4400: The QF-4400 Series is used in mid-sized crossflow systems and in chromatography systems, where gradient mixing
requires a 100:1 turndown ratio.
- QF 20K: The biggest Quattroflow pump with a max. capacity of 20000 l/h meets the requirements of high process volumes.
The pump series 150, 1200 and 4400 are also available in a "single use" version with product chambers made of plastic. The
main focus is the demand of the users for prevention of expensive and time-consuming flushing.
The E-Series represents the latest generation of plastic air-operated double diaphragm pumps made in solid design. A few of the
advantages of this pump include:
• further increased pump safety due to innovative ring-tightening structure
• increased capacity
• decreased air consumption
• reduced noise level
• optimized flow pattern
Quattroflow's positive displacement pumps incorporate four piston-diaphragm technology, with no mechanical seals, that are driven by an eccentric shaft and electrical motor. Quattroflow products primarily serve the pharmaceutical and biotech industries that require reliability, product safety, purity and cleanability.
The Quattroflow production program consists of four pump series:
- QF 150: This pump series is the best entry for laboratories, research centers and universities - small, portable, quiet and scalable.
- QF 1200: A versatile tool for many applications in laboratories, pilot and production plants worldwide. Stainless steel valve plate and new diaphragms allow inline steaming, autoclaving and easy cleaning.
- QF 4400: The QF-4400 Series is used in mid-sized crossflow systems and in chromatography systems, where gradient mixing requires a 100:1 turndown ratio.
- QF 20K: The biggest Quattroflow pump with a max. capacity of 20000 l/h meets the requirements of high process volumes.
The pump series 150, 1200 and 4400 are also available in a "single use" version with product chambers made of plastic. The main focus is the demand of the users for prevention of expensive and time-consuming flushing.
A variety of optional equipment is available to allow for a precise set-up to your specific application.
Pulsation damperIf a virtually uniform flow is needed, pulsation dampers in different versions are available.
Pump series: E-SERIES, CHEMICOR, BIOCOR, FUTUR
Barrier chamber SystemThe ALMATEC barrier chamber system meets high safety requirements. The individual diaphragm is replaced by two diaphragms arranged in tandem with a barrier chamber of conductive PE between them and
filled with non-conductive liquid. A change in conductivity of the barrier liquid is detected by sensors and signalled to a controller, which triggers an alarm or disconnects the pump.
Pump series: E-SERIES, CHEMICOR, BIOCOR
Stroke countingALMATEC air-operated diaphragm pumps can be used continuously (24h operation) or intermittently for hours, minutes or for an exact defined number of strokes. To accurately count the strokes a sensor can be installed in the pump's center housing (available as pneumatic version also).
Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR
diaphragm monitoringA capacitive sensor installed in the pump muffler detects the presence of liquids and in case of a diaphragm rupture it relays a corresponding signal to a controller that triggers an alarm or disconnects the pump via a connected solenoid valve.
Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR
Flange connectionAccording to recognized industry safety standards, all E-SERIES pump sizes from E 15 to E 80 can be equipped with thread bushings and flange-O-rings for flange connections to DIN or ANSI / PN 10.
Pump series: E-SERIES
draining SystemThe E-SERIES pumps in sizes 15 to 50 are available with a special ALMATEC draining system consisting of a bypass system in the side housings that can be activated easily either via hand-operated valves or
pneumatically. In this way, the pump and piping can be drained without having to be dismounted. The amount of cleaning agent and solvent required when changing products is reduced considerably and this
greatly reduces environmental pollution.
Pump series: E-SERIES
aoDD pumpsALMAteC
QUAttrOFLOW
Options