Antimony selenide measurement
-
Upload
semiconsoft -
Category
Technology
-
view
67 -
download
0
Transcript of Antimony selenide measurement
83 Pine Hill Rd. Southborough, MA 01772 Phone +1.617.388.6832 Fax. +1.508.858.5473
email: [email protected] http://www.semiconsoft.com
Thin Film Measurement solution Software, sensors, custom development and integration
Antimony Selenide (Sb2 Se3) Measurement Sb2 Se3 is an interesting material for potential use in thin film solar cells as an absorber. A sample of Antimoniy Selenide layer deposited on Au foil was measured using MProbe VisNIR system(450-1700nm wavelength range).
Fig. 1 Reflectance spectra of Sb2 Se3 taken at the different point of the sample. The spectra show that the sample thickness is non-uniform. Sb2 Se3 is absorbing in the visible range up to ~ 750 nm.
83 Pine Hill Rd. Southborough, MA 01772 Phone +1.617.388.6832 Fax. +1.508.858.5473
email: [email protected] http://www.semiconsoft.com
Fig. 2. Model to measurement fit (central point). Thickness and optical dispersion of the Sb2 Se3 was determined from the measurement, Thickness= 818nm
Fig. 3 Optical dispersion of the Sb2 Se3 is determined from the measurement. Dispersion is represented using CauchyK model.