ANTI-SLIP - Brianza...
Transcript of ANTI-SLIP - Brianza...
ANTI-SLIP
Rolls and sheets produced using continuous lamination process
• Interior floor
ELECTRIC VEHICLEANTISLIP
The new Elyplan Anti-slip, rolls and sheets produced by continuous lamination, represent the ideal solution for interior floors to prevent slipping of vehicle loads and people.
The product ensures an excellent value of slipperines resistance thanks to the addiction of a special mineral granulate (R13 class tested according to the DIN51130:2014-02 norm).
The product has passed the abrasion resistance test accordingly to the D4060-ISO 9352 norm, ensuring long lifespan. Available in different thicknesses, on request with or without woven roving. Standard colour grey; other colours on request.
• Interior floor
COMMERCIAL VEHICLE
• Thicknesses: from 0,8 to 3 mm• Widths up to 3000 mm• Rolls or sheets (upon request)• No protective film• In different colours: standard grey, other colours on request
• Interior floors for industrial and electric vehicles• Loading platforms and ramps
PRODUCT FEATURES
APPLICATIONS
ANTI-SLIP
Rolls and sheets produced using continuous lamination process
CTL
208/
EN
REV.
0 0
7.18
The technical specifications and data indicated in this catalogue are based on current experience and information and are, as far as we know, correct and accurate. They are subject to change without notice. We at Brianza Plastica disclaim any responsability for incorrect use of the material as the usage conditions are not under out direct control.
Brianza Plastica SpA Via Rivera, 50 - 20841 Carate Brianza - ItalyPh. +39 0362 91601 - Fax +39 0362 990457 - [email protected]
www.flatlaminates.com - www.brianzaplastica.it
ANTISLIP