Anti Heeling System
of 4
-
Upload
lunatic2000 -
Category
Documents
-
view
214 -
download
0
Transcript of Anti Heeling System
-
7/26/2019 Anti Heeling System
1/4
Best Maritime Technology
Brands of Hoppe Marine
Ship PerformanceFluid Management Motion Control
www.hoppe-marine.com
Anti-Heeling System
-
7/26/2019 Anti Heeling System
2/4www.hoppe-marine.com
Ship Management Systems
Ethernet/RS485 System Bus
Control Unit
HOMIP
Remote
Valves
Heeling
Pump
Level
Switches
Ship Inertial
Measuring
HOSIM
Hoppe Stability Test System
Starter Cabinet /
Substation with I/O-Modules
System Overview
The Anti-Heeling System is designed for the continuous
compensation of the ships heel during all kinds of
loading operations in port and during offshore operations.
With over 20 years of experience, our systems have been
installed on different types of container, heavy lift, offshore
supply and construction vessels. Special heel control on
sailing ships for wind load compensation on cruise course
or ice heeling on ice breakers round up the wide range of
Anti-Heeling System applications.
The heeling compensation of the system is achieved
by pumping ballast water or other fluids between theheeling tanks using reversible propeller pumps as well
as applications with centrifugal pumps. Pneumatically
controlled butterfly valves are standard parts of the
Anti-Heeling System.
The state of the art PLC unit HOMIP with integrated
6 touch screen display offers user-friendly operation
via customised screen layouts. It is designed for automatic
or manual heel control and can be connected to the ship
management system via Ethernet or RS 485 interface.
Key Features
Simple operation and
clear visualisation
Pump dry-running
protection
Heel compensation for
operations at sea
Major components arein-house designed and
engineered
Control and measuring
devices are class
type approved
Anti-Heeling System
-
7/26/2019 Anti Heeling System
3/4
Best Maritime Technology
Brands of Hoppe Marine
Components
Control panel and pump starter panel
Heeling pump with electric motor
Variable Frequency Drive (VFD) with flow
controller (optional)
Control valves
Level switches for dry-running protection
Level sensors for tank content indication (optional)
Inclinometer for static heel measurement
Inertial measuring unit (HOSIM) for dynamic heel
measurement (optional)
Reversible Anti-Heeling Pump
H250/H300/H400
Hoppes axial reversible propeller pumps are especially
designed for controlled bidirectional water shift. Sea water
resistant bronze material ensures long time operation.
Three different pump sizes are available for vertical or
horizontal installation as well as ex-proof executions. Pumpperformance range can be set by gear and motor type.
Pneumatic Operated Valves
The fluid flow is controlled by remote operated butterfly
valves with Hoppes reliable and fast acting pneumatic
actuator HOPAC. These actuators are especially designed
for marine use with high-quality seawater resistant
materials. Other actuators such as hydraulic or electro-hydraulic type are also available upon request.
Anti-Heeling System
Standard working range of Hoppe pumps at 60Hz
Valve with pneumatic actuatorReversible propeller pump
2
6
10
14
18
22
mWC
Working Range (60Hz):
Capacity (m3
/h)
500
H 250 H 300 H 400
20001000 1500
-
7/26/2019 Anti Heeling System
4/4
Hoppe Marine GmbH
Kieler Strae 318
22525 Hamburg
Germany
Tel. +49-40-561949-0
www.hoppe-marine.com
Hoppe China Co., Ltd.
German Center, Room 708, Tower 1
88 Keyuan Road
201203 Shanghai Pudong
China
Tel. +86-21-50278040
www.hoppe-china.com
Hoppe Korea Co., Ltd.
No 485-3, Gu Pyeong-Dong, Sa Ha-Gu
604-866 Busan
Republic of Korea
Tel. +82-51-4035851
www.hoppe-korea.com
Maihak Shaft Power Meter
Torque Power Meter
Maihak Performance Meter
Maihak Performance
Monitoring
Maihak PerformanceOptimization
Valve Remote Control
Tank Content Measuring
Bunker Management
Ballast Management
Water Ingress Detection
Anti-Heeling
Blower Anti-Heeling
Flume Stabilization
U-Tank Stabilization
Dynamic Floating Monitoring
Dynamic Trim andConning Measuring
Draught Measuring
Stabilty Test
Fluid Management Motion Control Ship Performance
Brands of Hoppe Marinewww.hoppe-marine.com
Best Maritime Technology
Anti-Heeling System
Upgrade Options
Heavy Lift Load Compensation
Hoppe offers an advanced Anti-Heeling System with a
special load moment control. The destabilizing moments
of, for example, heavy crane operations are recorded and
used to automatically determine the required stabilizing
moments. Frequency controlled reversible pumps ensure
immediate flow control reaction. In the case of offshore
heel operation, Hoppes inertial measuring unit HOSIM
is used to accurately determine the vessels motion and
eliminate its effect so that the heel compensation can be
executed correctly, even at sea.
Automatic Stability Test
The Anti-Heeling System is the base for Hoppes StabilityTest System. In combination with Hoppes Tank Content
and Draught Measuring Systems, an inclining test can be
carried out to verify the actual stability, providing valuable
safety and cargo optimizing information.
Ice-Heeling
The Anti-Heeling System can be used for ice heeling
operations on ice breakers. It is used to heel the vessel
regularly from port to starboard so that the vessel does
not get stuck in ice. Such a system requires fast reaction
times and large heel moments. For higher capacitiesBlower Anti-Heeling Systems are also available.
Load moment control inside HOMIP with Ice-Heeling visualisation
