Anti-Condensation
4
Anti-condensation All major credit cards accepted. www.wykamol.com - [email protected] 72 Condensation is becoming one of the commonest causes of dampness in buildings and is nearly always associated with black mould growth (Aspergillus niger). The problem arises because of high relative humidities, a lack of natural ventilation and, in most cases, cold external walls. Sometimes it's possible to reduce humidities by regulating activities like drying clothes indoors. Ventilation can be provided via trickle vents and so on but these are usually ineffective and unpopular due to perceived heat losses or cold draughts. Walls can be insulated but not without relatively major disturbance to occupants. Because of these factors a new approach to providing energy efficient humidity control was needed and this has been provided through the concept of positive input ventilation. Wykamol are stockists of a wide range of energy efficient, low maintenance fans which can be fitted with little or no disturbance and provide dramatic improvements to indoor air quality. They operate fully automatically and can transform 'mouldy' rooms in houses within a few days of installation. Many of our approved contractors are able to offer a full diagnosis and installation service and will ensure you get the system best suited to your property. HOMEVENT Sited in the loft space the Homevent with Heater delivers air to the central hallway or landing to provide displacement ventilation in order to improve air quality and resolve condensation related problems. Has an integral “intelligent low temperature” comfort heater* fitted as standard. The unit is powered by a single supply and capable of holding incoming air temperatures reasonably accurately – around 10ºC. PRODUCT CODE: HOMEVENT
-
Upload
brick-technology-ltd -
Category
Documents
-
view
215 -
download
2
description
Condensation is becoming one of the commonest causes of dampness in buildings and is nearly always associated with black mould growth (Aspergillus niger).
Transcript of Anti-Condensation
Anti-condensation
All major credit cards accepted.
www.wykamol.com - [email protected]
72
Condensation is becoming one of the commonest causesof dampness in buildings and is nearly alwaysassociated with black mould growth (Aspergillus niger).
The problem arises because of high relative humidities,a lack of natural ventilation and, in most cases, coldexternal walls. Sometimes it's possible to reducehumidities by regulating activities like drying clothesindoors. Ventilation can be provided via trickle vents andso on but these are usually ineffective and unpopulardue to perceived heat losses or cold draughts. Walls canbe insulated but not without relatively major disturbanceto occupants. Because of these factors a new approach
to providing energy efficient humidity control wasneeded and this has been provided through the conceptof positive input ventilation.
Wykamol are stockists of a wide range of energyefficient, low maintenance fans which can be fitted withlittle or no disturbance and provide dramaticimprovements to indoor air quality. They operate fullyautomatically and can transform 'mouldy' rooms inhouses within a few days of installation. Many of ourapproved contractors are able to offer a full diagnosisand installation service and will ensure you get thesystem best suited to your property.
HOMEVENTSited in the loft space the Homevent with Heater delivers air to the centralhallway or landing to provide displacement ventilation in order to improveair quality and resolve condensation related problems. Has an integral“intelligent low temperature” comfort heater* fitted as standard. The unitis powered by a single supply and capable of holding incoming airtemperatures reasonably accurately – around 10ºC.
PRODUCT CODE: HOMEVENT
tel: 0845 400 66 6673
FLATVENT WITH HEATERThe unit is designed to take fresh air from outside, clean the air, warm it (iffitted with heater) and discharge it into the central hallway via a system ofducting supplied by the installer. The dwelling internal air discharge grille isusually installed at high level in a central location within the hallway,although discharging the air down the length of the hallway (away from thefront door) should also prove acceptable.
PRODUCT CODE: NUFLATHEAT
KAIR KHRV 150Energy efficient continuous heat recovery for healthy air in kitchens,bathrooms, utility rooms, living rooms, lavatories, washrooms,conservatories, offices and bedrooms.
PRODUCT CODE: KHRV150
KAIR WHOLE HOUSE VENTILATORThese ventilators have been designed to create a continuous input of air.This will effectively combat condensation dampness and mould growth.Kair™ Loft units create a continuous drying out process in dwellings andwill help provide protection for hygroscopic material such as books, leathergoods, wooden furniture, clothing and other fabrics from mould.
PRODUCT CODE: KHW150
FLATVENTThe unit is designed to take fresh air from outside, clean the air, warm it (iffitted with heater) and discharge it into the central hallway via a system ofducting supplied by the installer. The dwelling internal air discharge grille isusually installed at high level in a central location within the hallway,although discharging the air down the length of the hallway (away from thefront door) should also prove acceptable.
PRODUCT CODE: NUFLATHEAT
All major credit cards accepted.
www.wykamol.com - [email protected]
74
MOULD ERADICATION KITA full multi purpose kit ideal as a sales aid to general public everythingyou need to deal with mould problems comes supplied with cleaningagents, all equipment and paint additives to treat and clean mouldissues in domestic properties.
PRODUCT CODE: MCSKIT
MOULD CLEAR CONCENTRATE MCS1This product is designed to provide an initial wash/ sterilisationtreatment to remove and kill mould spores and surface growths onpainted or papered surfaces. Also available as a 1 Litre spray
PRODUCT CODE: MCS1
FUNGICIDAL ADDITIVE MCS 3Wykamol MCS3 Fungicidal Additive is a high quality decorative paintadditive for internal surfaces and contains a long lasting biocide for thecontrol of surface moulds. Can be used in both Silk and Matt finishes.The formulation has been proven over many years to provide effectiveresistance to mould growth in difficult areas.
PRODUCT CODE: MCS3FA
ANTI CONDENSATION PAINT 5 LITRESA high quality coating recommended for use on areas not subject toabrasion or washing. Typically this means ceilings, underside of roofingsheets, ducting, steel building frames, pipe work, and insidecupboards. Wykamol Anti – condensation paint inhibits condensationby absorbing moisture and improving insulation.
PRODUCT CODE: ANTICONColour: Clear Size: 5 Litres Box Qty: 4
Colour: Clear Size: 5 Litres Box Qty: 4Colour: Clear Size: 1 Litres Box Qty: 1
Colour: Clear Size: 100ml Box Qty: 12
tel: 0845 400 66 6675
DOUBLE SIZED AIRBRICK BLACK HOLEVENTILATOR 71500BTUComplies with BS 5440 Part 2, 2000. For use with open fluedappliances with an input rating up to 21kW (71,000 Btu/h). ‘EFFECTIVEFREE AREA 70cm2 ’. Reversible for both high or low level mounting.Screw covers for flush finish.
PRODUCT CODE: BM720
127MM FIXED ANTI DRAUGHT BAFFLESC/W BLACK HOLE VENTILATORComplies with BS 5440 Part 2, 2000. For use with open fluedappliances with an input rating up to 13kW (44,000 Btu/h). ‘EFFECTIVEFREE AREA 30cm2 ’. Wall Thickness - Minimum 228mm (9”) Maximum585mm (23”).
PRODUCT CODE: BM725
VARIO BROWN VENTILATORCore drill ventilator. Supplied with an alternative anti-draught bafflewhich reduces the measured ‘Free Area’ to 70cm2 effective ‘FreeArea’. Core drill size 127mm (5”). Tube 350mm (1m length available).Includes Air blast cowl. HR Version available for high rise applications.
PRODUCT CODE: BM418-B
VARIO (HIGH RISE) BROWN VENTILATORCore drill ventilator. Supplied with an alternative anti-draught bafflewhich reduces the measured ‘Free Area’ to 70cm2 effective ‘FreeArea’. Core drill size 127mm (5”). Tube 350mm (1m length available).Includes Air blast cowl. HR Version available for high rise applications.
PRODUCT CODE: BM418HR-B
