Antennas - · PDF fileAntennas Bird® Technologies Group (BTG) ... antenna will provide...

You’re heard, loud and clear.

Antennas

Bird® Technologies Group (BTG) is a global, innovative supplier

of RF products, systems, services and educational solutions.

Combining the industry leading brands of both Bird Electronic

and TX RX Systems in one company reinforces the BTG

commitment to providing RF Measurement and Management in

Your World.

Our portfolio includes hardware, software, components and services. We

offer these innovative products and services through our industry lead-

ing product line brands, Bird Electronic Corp and TX RX Systems. We

provide test instruments that are highly accurate, rugged and easy to

use. Industry leading components and products such as site analyzers,

wattmeters, digital sensors, samplers, antennas, signal boosters,

and tower mounted amplifiers. Furthermore, we offer dependable

engineering, calibration and educational services for land mobile radio,

cellular, semiconductor, broadcast, medical, military and government

applications.

All BTG products can be serviced and calibrated by the Bird Service

Center (BSC). BSC provides a full range of service and support. With over

130 years of combined product and calibration experience, our service

technicians and product experts offer reliable service and customer care.

Bird Service Centers and Service Partners are located World Wide

providing a full range of service and support for your Bird Products.

Catalogs offered by Bird Technologies Group(To view or download go to www.bird-technologies.com)

Bird General Catalog

RF & Microwave Components Catalog

Transmit Combiners Catalog

Cavity Filters & Duplexers Catalog

Antennas Catalog

Tower Top Amplifiers, Receiver Multicouplers & Preselectors Catalog

Isolators & Loads Catalog

In-Building Coverage Catalog (Signal Boosters & Accessories)

Bird® Technologies Group combines the industry leading brands of both Bird Electronic and TX RX Systems and is a global, innovative supplier of RF products,systems, services and educational solutions. Bird® Technologies Group reserved the right to modify specifications or discontinue any product without notice.


30303 Aurora Rd. :: Solon, OH 44139 :: 866.695.4569 :: www.bird-technologies.com

©2009 Bird Technologies GroupAntenna-10142009

PIM-RATED ANTENNAS

COL Series

VHF and UHF Meander Collinear

The Meander Collinear Antennas, available in both the VHF, UHF and 700/800 MHz bands, have been specifically designed for applications requiring high performance, wide bandwidth and exceptional PIM specifications. The patented Meander Collinear element design allows multiple half-wave elements to be stacked without the variations in cable lengths and mechanical joints which have typified the construction techniques in high gain collinear antennas. With each dipole element being printed on a single sided PCB the susceptibility to passive intermodulation is practically eliminated. Placing the elements on a PCB controls PIM and removes manufacturing variations so that each and every antenna will provide the same pattern, tilt and VSWR characteristics over its operating bandwidth, resulting in a cost effective reliable, high performance, low PIM antenna. The radome and mounting tube support this line of antenna in a truly rugged package with internal DC grounding for lightning protection and reduction of precipitation noise. Everything about these Meander Collinear Antennas reflects the new demand for unquestioned consistent performance electri-cally and physically in the most demanding public safety and industrial applications.

BA Series

VHF and UHF Omnidirectional Dipole Arrays

These high performance VHF & UHF dipole arrays are ideal for highly populated radio sites requiring long haul omnidirectional coverage. They operate over entire bands and offer gain of 3, 6 or 9dBd (depending on model), exhibiting a VSWR of <1.5:1 across the band. The arrays utilize an internal phasing harness in PTFE based double-shielded coaxial cable with polyethylene jacket to aid waterproofing and resist scratch or puncture damage. The use of a unique phasing arrangement provides extensive side lobe suppression and null fill characteristics. VHF arrays will accept an input power level of 750 watts, making them ideal for high power multiple transmitter applications; UHF arrays will accept an input power level of 500 watts continuous. The BA160 series is available with an optional 3° downtilt, to further enhance close-in coverage characteristics. All welded alodined aluminum construction and new fabrication techniques in both the harness and dipole sections have proven to minimize intermodulation and noise generated within the antennas. The entire array rests at ground potential and offers the ultimate in lightning resistant antennas.

tel: 866.695.4569 fax: 716.549.4772 e: [email protected] TECHNOLOGIES GROUP RESERVES THE RIGHT TO MODIFY SPECIFICATIONS OR DISCONTINUE ANY PRODUCT WITHOUT NOTICE TERMS AND CONDITIONS POSTED ON HTTP://WWW.BIRD-TECHNOLOGIES.COM/SALES/BTG_TC.PDF

1

OA SeriesVHF and UHF Offset Dipole Arrays

Offset arrays are directional antennas for use when a base station is at one end of the coverage area. These new arrays feature improved gain, low noise performance and enhanced null fill coverage in an array with typ-ical cardioid coverage characteristics. OA Series arrays feature the same solid construction as the BA and EA series. The array utilizes an internal phasing harness in PTFE based double-shielded coaxial cable with poly-ethylene jacket to aid waterproofing and resist scratch or puncture damage. The OA Series have slightly more than 170° horizontal beamwidth, thus everything in front of the antenna is given coverage. This eliminates the possibility of fading at the extremities of the target coverage area. The level of radiation at the rear of the antenna is approximately unity gain. As would be expected from a cardioid array, the vertical beamwidth is slightly greater than its BA omnidirectional or EA elliptical pattern counterparts.

EA SeriesVHF and UHF Elliptical Dipole Arrays

The EA series arrays provide exceptionally high gain with an elliptical shaped radiation pattern, ideal for the bi-directional coverage requirements of some “corridor” applications. The array utilizes an internal phasing harness in PTFE based double-shielded coaxial cable with polyethylene jacket to aid waterproofing and resist scratch or puncture damage. The main lobe of these antennas is strong and highly controlled with extensive side lobe suppression ensuring the integrity of the pattern. Superior performance is maintained over the entire operating bandwidth of the antenna (400-520 MHz). VSWR is maintained at <1.5:1 and input power levels of 500 watts are accommodated for true high density site requirements. With all welded construction and superi-or internal harness construction (using highly stable PTFE based cables) the antennas provide not only excel-lent radiation characteristics but also high levels of intermodulation and noise suppression. IM performance is a world leading -150dBC based on a two carrier test. The entire array rests at ground potential and offers the ultimate in lightning resistant antennas.

This is a series of robust, high-power broadband omni-directional antennas were designed to complement our wide-bandwidth multicoupling systems covering the frequency range of 450-512 MHz. Through a true corporatefeed design, equal in-phase power is distributed to each radiating element. This method insures excellent vertical pattern control and shaping, low loss, and beam-tilt that does not vary over the operating bandwidth of the antenna. This patented design was achieved through the use of a 5-chamber extrusion which acts as the central core of the antenna and provides a low impedance direct ground for lightning protection. The rugged fiberglass radome and its interface to the mounting tube have survived extensive wind-tunnel testing at wind velocities exceeding category 5 hurricane forces. Antenna data files are available in TIA-IS-804 format for inclusion in popular commercial propagation analysis programs.

STANDARD BROADBAND ANTENNAS

PIM-RATED ANTENNAS

tel: 866.695.4569 fax: 716.549.4772 e: [email protected] TECHNOLOGIES GROUP RESERVES THE RIGHT TO MODIFY SPECIFICATIONS OR DISCONTINUE ANY PRODUCT

WITHOUT NOTICE TERMS AND CONDITIONS POSTED ON HTTP://WWW.BIRD-TECHNOLOGIES.COM/SALES/BTG_TC.PDF2

FSA Series & CSA SeriesVHF and UHF Directional Antennas

The FSA Series arrays are based on the popular OA Series dipole array antennas. Supplied in “kit” form these antennas are delivered in flat pack packaging to minimize freight and warehousing issues and allow forsimplified assembly at time of installation.The use of the flat screen reflector boosts the front to back ratio con-siderably allowing for tailoring antenna patterns for frequency re-use in extended networks. FSA Series Arrays feature the same solid construction as the standard array series. The folded dipoles utilize an internal phasing harness in PTFE based double screened coaxial cable with a polyethylene jacket. The screens themselves are also made of fully welded aluminum to assist in minimizing PIM. With all welded construction and superior internal harness construction the antennas provide not only excellent radiation characteristics but also defined, high levels of intermodulation and noise suppression. IM performance is -140dBc based on a two carrier test. The entire array rests at ground potential and offers the ultimate in lightning resistant antennas.


3

COL53 SERIES ANTENNASVHF Meander Collinear130-150 MHz

Typical E Plane (COL53-150)

SPECIFICATIONS, MECHANICAL

Model Numbers COL53-140COL53-150

Construction & Confi guration

Composite fi berglass sky blue radome, aluminum mounting tube

Length COL53-140COL53-150

215”204”

Radome Diameter 3”

Weight / Shipping Weight

COL53-140COL53-150

40 lbs / 93 lbs38 lbs / 90 lbs

Shipping Dimen-sions (HxWxL)

COL53-140COL53-150

6”x6”x223”6”x6”x211”

Termination 7/16” DIN female fl ange mount

Mounting Area 30”x3.5” diam. Aluminum

Suggested Clamps 91-00-101 (not included)

Projected Area ft2 COL53-140COL53-150

5.3 (no ice), 6.6 (with ice)5.0 (no ice), 6.3 (with ice)

Lateral Thrust @ 100mph

COL53-140COL53-150

130 lbs 123 lbs

Wind Gust Rating 149 mph (with or without ice)Torque @ 100 mph COL53-140

COL53-150866’759’

SPECIFICATIONS, ELECTRICAL

Model Numbers COL53-140COL53-150

Nominal Gain dBd 4.1

Frequency MHz COL53-140COL53-150

130-140140-150

Tuned Bandwidth 10

VSWR (Return Loss) <1.5:1 (14dB)

Normal Impedance 50

Vertical Beamwidth 23°

Horizontal Beamwidth Omni +/- 0.5dB

Input Power (Watts) 500

Passive IM 3rd order (2x20W) dBc

-150

Typical VSWR response (COL53-150)

MHz From Center Frequency

VSW

R

COL54 SERIES ANTENNASVHF Meander Collinear150-174 MHz



Model Numbers COL54-160COL54-166COL54-174



Length COL54-160COL54-166COL54-174

256”249”239”

Radome Diameter 3”


COL54-160COL54-166COL54-174

46 lbs / 99 lbs44 lbs / 97 lbs42 lbs / 95 lbs

Shipping Dimensions (HxWxL)

COL54-160COL54-166COL54-174

6”x6”x261”6”x6”x256”6”x6”x247”

Termination 7/16” DIN female fl ange mount

Mounting Area 30”x3.5” diam. Aluminum


Projected Area ft2 COL54-160COL54-166COL54-174

6.3 (no ice), 7.9 (with ice)6.1 (no ice), 7.7 (with ice)5.8 (no ice), 7.4 (with ice)


COL54-160COL54-166COL54-174

155 lbs 151 lbs145 lbs


COL54-166COL54-174

1296’1212’1105’


Model Numbers COL54-160COL54-166COL54-174


Frequency MHz COL54-160COL54-166COL54-174

150-160156-166162-174

Tuned Bandwidth COL54-160COL54-166COL54-174

101012


Normal Impedance 50





-150



VSW

R



COL45 SERIES ANTENNASUHF Meander Collinear

380-520 MHz


Model Numbers COL45-58COL45-65COL45-70COL45-71COL45-72

Construction &

Confi guration


Length COL45-58COL45-65COL45-70COL45-71COL45-72

132”122”111”107”103”

Radome Diameter 1.5”

Weight /

Shipping Weight

COL45-58COL45-65COL45-70COL45-71COL45-72

7 lbs / 15 lbs7 lbs / 15 lbs6 lbs / 13 lbs6 lbs / 13 lbs6 lbs / 13 lbs

Shipping Dimen-

sions (HxWxL)


3”x3”x138”3”x3”x128”3”x3”x118”3”x3”x114”3”x3”x110”

Termination 7/16” DIN female with 20” 9142 cable tail

Mounting Area 20”x2” diam. Aluminum


Projected Area ft2 COL45-58COL45-65COL45-70COL45-71COL45-72

1.6 (no ice), 2.7 (with ice)1.5 (no ice), 2.5 (with ice)1.4 (no ice), 2.2 (with ice)1.3 (no ice), 2.1 (with ice)1.3 (no ice), 2.0 (with ice)

Lateral Thrust @

100mph


40 lbs 37 lbs34 lbs33 lbs32 lbs


COL45-65COL45-70COL45-71COL45-72

163’135’106’98’88’


Model Numbers COL45-58COL45-65COL45-70COL45-71COL45-72


Frequency MHz COL45-58COL45-65COL45-70COL45-71COL45-72

380-400400-420450-470470-490490-520

Tuned Bandwidth

COL45-722030


Normal Impedance 50




Passive IM 3rd order

(2x20W) dBc

-150



VSW

R



5

BA SERIES ANTENNASVHF Omnidirectional Dipole Arrays136-174 MHz

BA80-41-DIN - E Plane

BA40-41-DIN - E Plane

BA80-41-DIN - H Plane


** Factory pre-set downtilt of 3° may be specified on BA80-41-DIN antennas by adding -T3 to the part number ordered e.g. BA80-41-DIN-T3.BA80-41-DIN shipped as BA4040-41-D and PA42-41-DIN series phasing harness. Detailed instruction is provided for field assembly.


Model Numbers BA40-41-DINBA4040-41-DINBA80-41-DIN

Nominal Gain dBd BA40-41-DINBA4040-41-DINBA80-41-DIN

32X36

Frequency MHz 136-174

Tuned Bandwidth Entire Band


Normal Impedance 50

Downtilt BA40-41-DINBA4040-41-DINBA80-41-DIN

Not offeredNot offered0° Std or -3°**

Vertical Beamwidth BA40-41-DINBA4040-41-DINBA80-41-DIN

35°2x35°18°



Passive IM 3rd order

(2x20W) dBc

BA40-41-DINBA4040-41-DINBA80-41-DIN

-150-140-140


Model Numbers BA40-41-DINBA4040-41-DINBA80-41-DIN

Construction &

Confi guration

BA40-41-DIN

BA4040-41-DIN

BA80-41-DIN

4 dipoles (2 bays) Turnstile stacked Single section support2x4 dipoles (2 bays) Turnstile stacked Dual section support8 dipoles (4 bays) Turnstile stacked Dual section support

Length BA40-41-DINBA4040-41-DINBA80-41-DIN

138”248”248”

Weight /

Shipping Weight


32 lbs / 192 lbs68 lbs / 288 lbs68 lbs / 288 lbs

Shipping

Dimensions

(HxWxL)


26”x26”x146”26”x32”x146”26”x32”x146”


Mounting Area BA40-41-DINBA4040-41-DINBA80-41-DIN

20”x2.5” diam. Aluminum20”x3.0” diam. Aluminum20”x3.0” diam. Aluminum

Suggested Clamps BA40-41-DINBA4040-41-DINBA80-41-DIN

91-00-104 (not included)



Projected Area ft2 BA40-41-DINBA4040-41-DINBA80-41-DIN


Lateral Thrust

@ 100mph


111 lbs 221 lbs221 lbs

Wind Gust Rating BA40-41-DINBA4040-41-DINBA80-41-DIN

149 mph (no ice), 115 (with ice)114 mph (no ice), 89 (with ice)114 mph (no ice), 89 (with ice)

Torque

@ 100 mphBA40-41-DINBA4040-41-DINBA80-41-DIN

455’1921’1921’



BA SERIES ANTENNASUHF Omnidirectional Dipole Arrays

330 - 520 MHz

BA40-XX -DIN - H Plane

BA80-XX -DIN - H Plane


BA40-XX -DIN - E Plane

BA80-XX -DIN - E Plane

BA160-67 -DIN - E Plane

BA160-67-DIN will be shipped in the configuration of 2 arrays (BA8080-67-DIN) along with an external harness PA82-67-DIN. Detailed instruction is provided for field assembly.


Model Numbers BA40-57-DINBA80-57-DINBA40-67-DINBA80-67-DINBA160-67-DIN

Nominal Gain dBd BA40-57-DINBA80-57-DINBA40-67-DINBA80-67-DINBA160-67-DIN

86369

Frequency MHz BA40-57-DINBA80-57-DINBA40-67-DINBA80-67-DINBA160-67-DIN

330-420 330-420400-520400-520400-520

Tuned Bandwidth Entire Band


Normal Impedance 50

DowntiltBA160-67-DIN

Not offered0° Std or -3°

Vertical Beamwidth BA40-57-DINBA80-57-DINBA40-67-DINBA80-67-DINBA160-67-DIN

30°16°30°16°9°



Passive IM 3rd order (2x20W) dBc BA160-67-DIN

-150-140


Model Numbers BA40-57-DINBA80-57-DINBA40-67-DINBA80-67-DINBA160-67-DIN


BA40-57-DIN

BA80-57-DIN

BA40-67-DIN

BA80-67-DIN

BA160-67-DIN

4 dipoles (2 bays) Turnstile stacked Single section support8 dipoles (4 bays) Turnstile stacked Dual section support4 dipoles (2 bays) Turnstile stacked Single section support8 dipoles (4 bays) Turnstile stacked Dual section support16 dipoles (8 bays) Turnstile stacked Dual section support

Length BA40-57-DINBA80-57-DINBA40-67-DINBA80-67-DINBA160-67-DIN

83”118”83”118”197”


BA40-57-DINBA80-57-DINBA40-67-DINBA80-67-DINBA160-67-DIN




17”x17”x87”17”x17”x126”17”x17”x87”17”x17”x126”17”x22”x126”


Mounting AreaBA160-67-DIN

20”x1.9” diam. Aluminum20”x2.5” diam. Aluminum

Suggested ClampsBA160-67-DIN

91-00-104 (not included)91-00-114 (not included)

Projected Area ft2 BA40-57-DINBA80-57-DINBA40-67-DINBA80-67-DINBA160-67-DIN




51 lbs 87 lbs49 lbs82 lbs161 lbs

Wind Gust Rating BA40-57-DINBA80-57-DINBA40-67-DINBA80-67-DINBA160-67-DIN

149 mph (no ice), 146 (with ice)146 mph (no ice), 109 (with ice)149 mph (no ice), 117 (with ice)149 mph (no ice), 112 (with ice)134 mph (no ice), 104 (with ice)

Torque @ 100 mph


86’282’82’268’1045’


7

BA SERIES ANTENNASUHF Omnidirectional Dipole Arrays400 - 520 MHz


Model Numbers BA4040-67-DINBA8080-67-DIN

Nominal Gain dBd BA4040-67-DINBA8080-67-DIN

2x32x6


Tuned Bandwidth 120

VSWR <1.5:1

Normal Impedance 50

Vertical Beamwidth BA4040-67-DINBA8080-67-DIN

2x30°2x16°

Horizontal Beamwidth Omni +/-0.5dB



BA4040-67-DINBA8080-67-DIN

< -150< -140


Model Numbers BA4040-67-DINBA8080-67-DIN


BA4040-67-DIN

BA8080-67-DIN

2x4 dipoles (2 bays) Turnstile stacked Single section support2x8 dipoles (4 bays) Turnstile stacked dual section support

Length BA4040-67-DINBA8080-67-DIN

118”197”


BA4040-67-DINBA8080-67-DIN

18 lbs / 84 lbs44 lbs / 124 lbs


BA4040-67-DINBA8080-67-DIN

17x17x12617x22x126

Termination 7/16” DIN female on cable tail

Mounting Area BA4040-67-DINBA8080-67-DIN

20”x2” diam aluminum20”x2.5” diam aluminum

Projected Area ft2 BA4040-67-DINBA8080-67-DIN



BA4040-67-DINBA8080-67-DIN

82161

Wind Gust Rating BA4040-67-DINBA8080-67-DIN

>150 mph (no ice), 112 (with ice)134 mph (no ice), >104 (with ice)

Rotational Torque @ 100 mph

BA4040-67-DINBA8080-67-DIN

2681045



FSA SERIES ANTENNASVHF Antennas

148 - 174 MHz


Model Numbers FSA10-41-DINFSA20-41-DIN

Nominal Gain dBd FSA10-41-DINFSA20-41-DIN

57


Tuned Bandwidth Full


Normal Impedance 50

Vertical Beamwidth FSA10-41-DINFSA20-41-DIN

70°34°

Horizontal Beamwidth FSA10-41-DINFSA20-41-DIN

106°108°

Front/Back Ratio dB FSA10-41-DINFSA20-41-DIN

1718



< -140


Model Numbers FSA10-41-DINFSA20-41-DIN


Welded aluminum, corrosion protection plating

Length/Width FSA10-41-DINFSA20-41-DIN

51”x41”102”x41”


FSA10-41-DINFSA20-41-DIN

32 lbs / 42 lbs74 lbs / Screen = 56 + Array = 88 lbs (Total = 144)



10”x49”x59”Screen = 10” Array = 21”Screen = 49” Array = 8Screen = 110 Array =146

Termination 7/16” DIN female with 20” cable tail

Mounting Area Clamps included to suit pole diameter 3.5” to 4.5”

Projected Area ft2 FSA10-41-DINFSA20-41-DIN




152 (no ice), 245 (with ice)329 (no ice), 544 (with ice)

Wind Gust Rating >150 mph (no ice), >150 (with ice)Rotational Torque @ 100 mph



Typical VSWR response (FSA20-41-DIN)

Frequency MHz

VSW

R

Typical H Plane(FSA20-41-DIN)

Typical E Plane(FSA20-41-DIN)



9

CSA SERIES ANTENNASVHF Antennas148 - 174 MHz


Model Numbers CSA10-41-DINCSA20-41-DIN

Nominal Gain dBd CSA10-41-DINCSA20-41-DIN

79




Normal Impedance 50

Vertical Beamwidth CSA10-41-DINCSA20-41-DIN

66°35°

Horizontal Beamwidth CSA10-41-DINCSA20-41-DIN

64°62°

Front/Back Ratio dB CSA10-41-DINCSA20-41-DIN

2324



< -140


Model Numbers CSA10-41-DINCSA20-41-DIN



Length/Width CSA10-41-DINCSA20-41-DIN

51”x82”102”x82”


CSA10-41-DINCSA20-41-DIN

47 lbs / 57 lbs110 lbs / Screen = 92 + Array = 88 lbs (Total = 180)



17”x38”x59”Screen = 17” Array = 21”Screen = 38” Array = 8Screen = 110 Array =146



Projected Area ft2 CSA10-41-DINCSA20-41-DIN





Wind Gust Rating >150 mph (no ice), >150 (with ice)Rotational Torque @ 100 mph



Typical VSWR response (CSA20-41-DIN)

Frequency MHz

VSW

R

Typical E Plane(CSA20-41-DIN)


Typical H Plane(CSA20-41-DIN)



OA SERIES ANTENNASVHF Offset Dipole Arrays

136-174 MHz

OA40-41-DIN - E PlaneOA20-41-DIN - E Plane


Model Numbers OA20-41-DINOA40-41-DIN

Nominal Gain dBd OA20-41-DINOA40-41-DIN

59


Tuned Bandwidth Entire band


Normal Impedance 50

Downtilt OA20-41-DINOA40-41-DIN

Not Offered0 Std, -3°**

Vertical Beamwidth OA20-41-DINOA40-41-DIN

35°17°

Horizontal Beamwidth OA20-41-DINOA40-41-DIN

178°176°



OA20-41-DINOA40-41-DIN

-150-140*


Model Numbers OA20-41-DINOA40-41-DIN


OA20-41-DIN

OA40-41-DIN

2 dipoles (2 bays) Single sidedSingle section support4 dipoles (4 bays) Single sided Dual section support External fi nal harness

Length OA20-41-DINOA40-41-DIN

138”248”



28 lbs / 188 lbs64 lbs / 282 lbs



21”x8”x146”21”x12”x146”


Mounting Area 20” x 2.5” dia aluminum

Suggested Clamps OA20-41-DINOA40-41-DIN

91-00-104 not included91-00-114 not inculded

Projected Area ft2 OA20-41-DINOA40-41-DIN




99 lbs197 lbs

Wind Gust Rating OA20-41-DINOA40-41-DIN




4061713

OA40-41-DIN - H PlaneOA20-41-DIN - H Plane


11

OA SERIES ANTENNASUHF Offset Dipole Arrays330-520 MHz

OA20-XX - H Plane OA20-XX - E Plane

OA40-XX - H Plane OA40-XX - E Plane

OA80-67 - H Plane OA80-67 - E Plane


Model Numbers OA20-57-DINOA40-57-DINOA20-67-DINOA40-67-DINOA80-67-DIN

Nominal Gain dBd OA20-57-DINOA40-57-DINOA20-67-DINOA40-67-DINOA80-67-DIN

595911

Frequency MHz OA20-57-DINOA40-57-DINOA20-67-DINOA40-67-DINOA80-67-DIN

330-420330-420400-520400-520400-520



Normal Impedance 50

DowntiltOA80-67-DIN

Not Offered0 Std, -3°**

Vertical Beamwidth OA20-57-DINOA40-57-DINOA20-67-DINOA40-67-DINOA80-67-DIN

35°17°35°17°8°

Horizontal Beamwidth OA20-57-DINOA40-57-DINOA20-67-DINOA40-67-DINOA80-67-DIN

175°173°180°178°180°


Passive IM 3rd order (2x20W) dBc OA80-67-DIN

-150-140*


Model Numbers OA20-57-DINOA40-57-DINOA20-67-DINOA40-67-DINOA80-67-DIN


OA20-57-DIN

OA40-57-DIN

OA20-67-DIN

OA40-67-DIN

OA80-67-DIN

2 dipoles (2 bays) Single sidedSingle section support4 dipoles (4 bays) Single sided Single section support2 dipoles (2 bays) Single sidedSingle section support4 dipoles (4 bays) Single sided Single section support8 dipoles (8 bays) Single sided Single section support External fi nal harness

Length OA20-57-DINOA40-57-DINOA20-67-DINOA40-67-DINOA80-67-DIN

83”118”83”118”197”


OA20-57-DINOA40-57-DINOA20-67-DINOA40-67-DINOA80-67-DIN




15”x7”x87”17”x7”x126”15”x7”x87”17”x7”x126”17”x10”x126”


Mounting AreaOA80-67-DIN

20” x 1.9” dia aluminum20” x 2.5” dia aluminum

Suggested ClampsOA80-67-DIN


Projected Area ft2 OA20-57-DINOA40-57-DINOA20-67-DINOA40-67-DINOA80-67-DIN




45 lbs74 lbs44 lbs72 lbs126 lbs

Wind Gust Rating OA20-57-DINOA40-57-DINOA20-67-DINOA40-67-DINOA80-67-DIN

149 (no ice), 118 (with ice)149 (no ice), 113 (with ice)149 (no ice), 119 (with ice)149 (no ice), 114 (with ice)137 (no ice), 111 (with ice)



7524373235829



FSA SERIES ANTENNASUHF Antennas

406-512 MHz


Model Numbers FSA10-67-DINFSA20-67-DINFSA40-67-DIN

Nominal Gain dBd FSA10-67-DINFSA20-67-DINFSA40-67-DIN

579




Normal Impedance 50

Vertical Beamwidth FSA10-67-DINFSA20-67-DINFSA40-67-DIN

71°35°17°

Horizontal Beamwidth FSA10-67-DINFSA20-67-DINFSA40-67-DIN

130°129°132°



< -140


Model Numbers FSA10-67-DINFSA20-67-DINFSA40-67-DIN



ScreenLength/Width

FSA10-67-DINFSA20-67-DINFSA40-67-DIN

20”x23.5”39.5”x23.5”79”x23.5”



FSA40-67-DIN

9 lbs / 19 lbs30 lbs / Screen = 31 + Array = 35 (Total = 66)40 lbs / Screen = 36+ Array = 44 (Total = 80)



FSA40-67-DIN

10”x32”x28”H: Screen = 10” Array = 15”W: Screen = 21” Array = 7”L: Screen = 47” Array = 87”H: Screen = 10” Array = 17”W: Screen = 32” Array = 7”L: Screen = 85” Array = 126”



Projected Area ft2 FSA10-67-DINFSA20-67-DINFSA40-67-DIN




34 lbs (no ice), 60 lbs (with ice)117 lbs (no ice), 186 lbs (with ice)136 lbs (no ice), 237 lbs (with ice)

Wind Gust Rating >150 (no ice), >150 (with ice)Rotational Torque @ 100 mph


3 (no ice), 6 (with ice)6 (no ice), 10 (with ice)13 (no ice), 23 (with ice)

Typical VSWR response (FSA20-67-DIN)

Frequency MHz

VSW

R

Typical H Plane(FSA20-67-DIN)





13

CSA SERIES ANTENNASUHF Antennas406-512 MHz


Model Numbers CSA10-67-DINCSA20-67-DINCSA40-67-DIN

Nominal Gain dBd CSA10-67-DINCSA20-67-DINCSA40-67-DIN

7911




Normal Impedance 50

Vertical Beamwidth CSA10-67-DINCSA20-67-DINCSA40-67-DIN

71°35°17°

Horizontal Beamwidth CSA10-67-DINCSA20-67-DINCSA40-67-DIN

70°69°71°

Front / Back Ratio dB CSA10-67-DINCSA20-67-DINCSA40-67-DIN

222528



< -140


Model Numbers CSA10-67-DINCSA20-67-DINCSA40-67-DIN



ScreenLength/Width

CSA10-67-DINCSA20-67-DINCSA40-67-DIN

20”x33”39”x33”79”x33”



CSA40-67-DIN

13 lbs / 23 lbs42 lbs / Screen = 43 + Array = 35 (Total = 78)75 lbs / Screen = 71 + Array = 44 (Total = 115)



CSA40-67-DIN

16”x20”x28”H: Screen = 16” Array = 15”W: Screen = 20” Array = 7”L: Screen = 47” Array = 87”H: Screen = 16” Array = 17”W: Screen = 20” Array = 7”L: Screen = 85” Array = 126”



Projected Area ft2 CSA10-67-DINCSA20-67-DINCSA40-67-DIN




72 lbs (no ice), 123 lbs (with ice)158 lbs (no ice), 261 lbs (with ice)261 lbs (no ice), 461 lbs (with ice)

Wind Gust Rating >150 (no ice), >150 (with ice)Rotational Torque @ 100 mph


30 (no ice), 50 (with ice)55 (no ice), 91 (with ice)111 (no ice), 195 (with ice)

Typical VSWR response (CSA20-67-DIN)

Frequency MHz

VSW

R

Typical H Plane(CSA20-67-DIN)






EA SERIES ANTENNASVHF Elliptical Dipole Arrays

136-174 MHz

EA80-41-DIN - E PlaneEA40-41-DIN - E Plane

EA80-41-DIN - H PlaneEA40-41-DIN - H Plane


Model Numbers EA40-41-DINEA80-41-DIN

Nominal Gain dBd EA40-41-DINEA80-41-DIN

58




Normal Impedance 50

Downtilt EA40-41-DINEA80-41-DIN

Not Offered0 Std, -3°

Vertical Beamwidth EA40-41-DINEA80-41-DIN

35°17°

Horizontal Beamwidth EA40-41-DINEA80-41-DIN

104°128°



EA40-41-DINEA80-41-DIN

-150-140


Model Numbers EA40-41-DINEA80-41-DIN


EA40-41-DIN

EA80-41-DIN

4 dipoles (2 bays) In-line stackedSingle section support8 dipoles (4 bays) In-line stacked Dual section support

Length EA40-41-DINEA80-41-DIN

138”248”



32 lbs / 192 lbs68 lbs / 288 lbs



26”x26”x146”26”x32”x146”


Mounting Area EA40-41-DINEA80-41-DIN

20” x 2.5” dia aluminum20” x 3.0” dia aluminum

Suggested Clamps EA40-41-DINEA80-41-DIN


Projected Area ft2 EA40-41-DINEA80-41-DIN




128 lbs253 lbs

Wind Gust Rating EA40-41-DINEA80-41-DIN




5222204


15

EA SERIES ANTENNASUHF Elliptical Dipole Arrays330-520 MHz


Model Numbers EA40-57-DINEA80-57-DINEA40-67-DINEA80-67-DIN

Nominal Gain dBd EA40-57-DINEA80-57-DINEA40-67-DINEA80-67-DIN

5858

Frequency MHz EA40-57-DINEA80-57-DINEA40-67-DINEA80-67-DIN

330-420330-420400-520400-520



Normal Impedance 50

Downtilt Not Offered

Vertical Beamwidth EA40-57-DINEA80-57-DINEA40-67-DINEA80-67-DIN

34°17°34°17°

Horizontal Beamwidth EA40-57-DINEA80-57-DINEA40-67-DINEA80-67-DIN

70°74°70°74°



-150


Model Numbers EA40-57-DINEA80-57-DINEA40-67-DINEA80-67-DIN


EA40-57-DIN

EA80-57-DIN

EA40-67-DIN

EA80-67-DIN

4 dipoles (2 bays) In-line stackedSingle section support8 dipoles (4 bays) In-line stacked Single section support 4 dipoles (2 bays) In-line stackedSingle section support8 dipoles (4 bays) In-line stacked Single section support

Length EA40-57-DINEA80-57-DINEA40-67-DINEA80-67-DIN

83”118”83”118”


EA40-57-DINEA80-57-DINEA40-67-DINEA80-67-DIN

11 lbs / 76 lbs18 lbs / 84 lbs11 lbs / 76 lbs18 lbs / 84 lbs



17”x17”x97”17”x17”x126”17”x17”x87”17”x17”x126”


Mounting Area 20” of 1.9” diam aluminum

Suggested Clamps 91-00-104 not included

Projected Area ft2 EA40-57-DINEA80-57-DINEA40-67-DINEA80-67-DIN

2.4 (no ice), 4.1 (with ice)4.1 (no ice), 7.6 (with ice)2.3 (no ice), 3.8 (with ice)3.9 (no ice), 7.0 (with ice)



59 lbs102 lbs56 lbs97 lbs

Wind Gust Rating EA40-57-DINEA80-57-DINEA40-67-DINEA80-67-DIN

149 (no ice), 111 (with ice)128 (no ice), 94 (with ice)149 (no ice), 115 (with ice)136 (no ice), 101 (with ice)



99 lbs335 lbs94 lbs318 lbs

EA80-XX-DIN - E PlaneEA40-67-DIN - E Plane

EA80-XX-DIN - H PlaneEA40-67-DIN - H Plane



DUAL FEED BASE STATION ANTENNAS101D-9006-0-03 (N)

806-940 MHz


Model Numbers 101D-90-06-0-03

Frequency MHz 806-940 MHz

Bandwidth 134 Mhz

Gain 6 dBd

Isolation Between Antennas

>30 dB

Beamtilt, in degrees 0

Impedance 50 ohms

VSWR, Full Bandwidth 1.5:1

Power Rating (Watts) 500 (N-conn); 1000 (DIN-conn)

Standard Termination 7/16 DIN Female* (N) Option Available

Lightning Protection Direct Ground, Spike at top of radome

Half Power AngleH-PlaneE-Plane

360°18°

Polarization Verticle


Model Numbers 101D-90-06-0-03

Total Length 9.5 ft


Support Pipe 4.0” Diameter

Support Pipe Mounting Area

25.6”

Weight 45 lbs

Equicalent Flat AreaWithout IceWith 0.5” radial ice

1.95 sq.’2.49 sq.’

Rated Wind VelocityWithout IceWith 0.5” radial ice

225 mph200 mph


17

BROADBAND380-430 /450-512 /746-869 MHz

Notes: #Add INV to Downtilt Designator for Inverted Mount Model (e.g. 101-68-10-3INV-03) * Add Suffix N to Model Number for N Connector (e.g. 101-68-10-0-03N) ** 420-430 MHz rises to 2.3:1 max. *** 509-512 rises to 2.3:1 max.


Model Numbers / Frequency Range

101-56-10-0-03101-68-10-0-03101-68-10-3-03101-68-10-6-03

380-430 MHz450-512 MHz450-512 MHz450-512 MHz

Bandwidth 101-56-10-0-03 50 MHz62 MHz

Gain (dBd) 101-56-10-0-03 8 8-10

Downtilt 101-56-10-0-03101-68-10-0-03101-68-10-3-03101-68-10-6-03

0°0°3°6 °

E-Plane(Vertical Bandwidth)

101-56-10-0-03 10° - 9°10° - 8°

H-Plane (Omni-Directional) 360°

Impedance 50

VSWR 101-56-10-0-03101-68-10-0-03101-68-10-3-03101-68-10-6-03

1.6:1**1.6:1***1.5:11.5:1

Power Rating 1000 W

Polarizationg Verticle

Lightning Protection Direct Ground

Standard Termination/Connector

101-56-10-0-03 N7/16 DIN or N*

Total Length 101-56-10-0-03 18’15.8’


Support Pipe/Mounting Area

3.5” / 4” Diameter

Weight 101-56-10-0-03 7.3 lbs70 lbs

Equivalent Flat-Plate Area, without ice

101-56-10-0-03 3.56 sq.’3.11 sq.’

Equivalent Flat-Plate Area, with 0.5” radial ice

101-56-10-0-03 4.56 sq.’3.98 sq.’

Rated Wind Velocity, without ice

150 mph

Rated Wind Velocity, with 0.5” radial ice

125 mph


Model Numbers / Frequency Range

101-83B-09-0101-89A-09-X101-90-08-X101-92-10-X101-92-12-0

746-869 MHz806-869 MHz806-960 MHz824-894 MHz824-894 MHz

Bandwidth 101-83B-09-0101-89A-09-X101-90-08-X101-92-10-X101-92-12-0

123 MHz63 MHz154 MHz70 MHz70 MHz

Gain (dBd) 101-83B-09-0101-89A-09-X101-90-08-X101-92-10-X101-92-12-0

9981012

Downtilt 101-83B-09-0101-89A-09-X101-90-08-X101-92-10-X101-92-12-0

0°Contact FactoryContact FactoryContact Factory0°

E-Plane(Vertical Bandwidth)

101-83B-09-0101-89A-09-X101-90-08-X101-92-10-X101-92-12-0

10° +/- 1°9.5°10°9°5°

H-Plane (Omni-Directional) 360°

Impedance 50

VSWR 1.5:1

Power Rating (Watts) 1000(DIN) / 500(N)

Polarizationg Verticle

Lightning Protection Direct Ground

Standard Termination/Connector

7/16 DIN or N*

Total Length 101-83B-09-0101-89A-09-X101-90-08-X101-92-10-X101-92-12-0

10’10.5’9.9’10.9’18’


Support Pipe/ Mounting Area 4” Diameter

Weight 101-83B-09-0101-89A-09-X101-90-08-X101-92-10-X101-92-12-0

45 lbs45 lbs38 lbs45 lbs70 lbs

Equivalent Flat-Plate Area, without ice

101-83B-09-0101-89A-09-X101-90-08-X101-92-10-X101-92-12-0

2.0 sq.’2.0 sq.’1.95 sq.’2.14 sq.’3.55 sq.’

Equivalent Flat-Plate Area, with 0.5” radial ice

101-83B-09-0101-89A-09-X101-90-08-X101-92-10-X101-92-12-0

2.56 sq.’2.56 sq.’2.49 sq.’2.74 sq.’4.5 sq.’

Rated Wind Velocity, without ice 101-92-12-0

225 mph150 mph

Rated Wind Velocity, with 0.5” radial ice 101-92-12-0

200 mph125 mph

806 MHz

746 MHz

869 MHz



REFERENCEAntenna Isolation Curves

Horizontal Dipole Isolation at 160 MHz Vertical Dipole Isolation at 160 MHz

Horizontal Dipole Isolation at 460 MHz

0

10

20

30

40

50

60

70

0 10 20 30 40 50 60 70 80 90 100 110

Vertical Dipole Isolation at 460 MHz

Vertical Dipole Isolation at 750 MHz

Horizontal Dipole Isolation at 860 MHz Vertical Dipole Isolation at 860 MHz

Horizontal Dipole Isolation at 750 MHz


Antennas

Bird® Technologies Group (BTG) is a global, innovative supplier

of RF products, systems, services and educational solutions.

Combining the industry leading brands of both Bird Electronic

and TX RX Systems in one company reinforces the BTG

commitment to providing RF Measurement and Management in

Your World.

Our portfolio includes hardware, software, components and services. We

offer these innovative products and services through our industry lead-

ing product line brands, Bird Electronic Corp and TX RX Systems. We

provide test instruments that are highly accurate, rugged and easy to

use. Industry leading components and products such as site analyzers,

wattmeters, digital sensors, samplers, antennas, signal boosters,

and tower mounted amplifiers. Furthermore, we offer dependable

engineering, calibration and educational services for land mobile radio,

cellular, semiconductor, broadcast, medical, military and government

applications.

All BTG products can be serviced and calibrated by the Bird Service

Center (BSC). BSC provides a full range of service and support. With over

130 years of combined product and calibration experience, our service

technicians and product experts offer reliable service and customer care.

Bird Service Centers and Service Partners are located World Wide

providing a full range of service and support for your Bird Products.

Catalogs offered by Bird Technologies Group(To view or download go to www.bird-technologies.com)

Bird General Catalog

RF & Microwave Components Catalog

Transmit Combiners Catalog

Cavity Filters & Duplexers Catalog

Antennas Catalog

Tower Top Amplifiers, Receiver Multicouplers & Preselectors Catalog

Isolators & Loads Catalog

In-Building Coverage Catalog (Signal Boosters & Accessories)

Bird® Technologies Group combines the industry leading brands of both Bird Electronic and TX RX Systems and is a global, innovative supplier of RF products,systems, services and educational solutions. Bird® Technologies Group reserved the right to modify specifications or discontinue any product without notice.


30303 Aurora Rd. :: Solon, OH 44139 :: 866.695.4569 :: www.bird-technologies.com

©2009 Bird Technologies GroupAntenna-10142009

Antennas - · PDF fileAntennas Bird® Technologies Group (BTG) ... antenna will provide...

Documents

Transcript of Antennas - · PDF fileAntennas Bird® Technologies Group (BTG) ... antenna will provide...