Anilox to suit ALL your paper boards

Cell Volume:12-15cm3/m2, 8-10 BCM (Bladed)10-12 cm3/m2, 6-8 BCM (2-Roll)

Screen count:120-140 L/cm, 300-350 L/in EFlo (75 deg)

100-120 L/cm, 250-300 L/in ThermaFlo (60 deg)

TEST/RECYCLED KRAFT LINERS

Cell Volume:10-12cm3/m2, 6-8 BCM (Bladed) 8-10 cm3/m2, 5-6.5 BCM (2-Roll)

Screen count:170-190 L/cm, 425-475 L/in EFlo (75 deg)

120-140 L/cm, 300-350 L/in ThermaFlo (60 deg)

www.pamarco.com

Tel: +44 (0) 1925 456789 anilox@pamarco.com

THERMAFLO™ EFLO™

COATED LINERS

Cell Volume:4.5-6.0 cm3/m2, 1.8-3.8 BCM (Bladed) 3.5-5.0 cm3/m2, 2.3-3.3 BCM (2-Roll)

Screen count:260-360 L/cm, 650-900 L/in EFlo (75 deg)

180-240 L/cm, 450-600 L/in ThermaFlo (60 deg)BLADED

2 ROLL

Pamarco’s unique EFlo and ThermaFlo anilox cell technology, provide perfect ink transfer for HD and Flat Top Dot printing plates, ensuring perfect colour matching, time after time

Pamarco’s commitment to leading EFlo anilox cell technology is recognized worldwide by printers demanding high quality print

Independent trials certified by Swansea and Clemson Universities, have shown Pamarco’s MicroDynamics and Microfax, anilox cell measurement systems, to rank #1 for repeatability & reproducibility

High Resolution,Right-First- Time Graphics

HD Certified Print fromPamarco EFlo-HD

Pamarco’s Process Data Archiving ensures all cell engravings parameters are stored and 100% comparable and repeatable

Zero Waste, Low Maintenance

Pamarco’s high performance ceramic coatings provide a hard wearing and durable surface, resistant to scoring and wear, even in the most demanding printing environments

Long Lifetime, Maximum Printing Performance

Ranked #1 for Most Consistent& Measurable Quality