ANILOX ROLL CLEANING ON-THE-GO · 2021. 3. 4. · ANILOX ROLL CLEANING ON-THE-GO. Sani-Blast™...
2
ANILOX ROLL CLEANING ON-THE-GO Sani-Blast™ service brings our proven Sanilox™ roll cleaning technology to you. Performed on-site at your facility or off-site at Eaglewood Technologies, our expert technicians will deep clean anilox rolls, gravure rolls, coating rolls, chrome or glue rolls and sleeves. A before and after volume check, a visual inspection of the rolls, and a final analysis report is also provided. MAXIMUM SAFETY Over 10,000 rolls have been cleaned by our skilled technicians. Our services are safe for your rolls, safe for your people, and safe for the environment. PROVEN RESULTS Our skilled technicians provide roll reports that illustrate the effectiveness of the cleaning service and the condition of your anilox inventory. Deep cleaning will save you money, increase productivity, and extend the life of your anilox rolls. OUR TECHNOLOGY Sani-Blast™ was the pioneer of the sodium bicarbonate method for cleaning of anilox rolls. We’ve been manufacturing sodium bicarbonate cleaning systems and providing cleaning services since 1994. Trust the experts with your cleaning needs! On-Site at Your Facility: • In press or off press capabilities • Don’t forget about the glue rolls on your corrugator! • Efficient process that reduces press downtime • Comprehensive roll report illustrates the condition of each roll before and after cleaning with microscopic photos and volume measurements Off-Site at Eaglewood Technologies: • An economical and speedy alternative for those who are able to ship their rolls to our facility • Guaranteed turnaround time of 48 hours • Specify cleaning type with either the Sanilox™ or Laserlox™ roll cleaning systems • Schedule a demonstration of either technology!
Transcript of ANILOX ROLL CLEANING ON-THE-GO · 2021. 3. 4. · ANILOX ROLL CLEANING ON-THE-GO. Sani-Blast™...
ANILOX ROLL CLEANING ON-THE-GOSani-Blast™ service brings our proven Sanilox™ roll cleaning technology to you. Performed on-site at your facility or off-site at Eaglewood Technologies, our expert technicians will deep clean anilox rolls, gravure rolls, coating rolls, chrome or glue rolls and sleeves. A before and after volume check, a visual inspection of the rolls, and a final analysis report is also provided.
MAXIMUM SAFETY Over 10,000 rolls have been cleaned by our skilled technicians. Our services are safe for your rolls, safe for your people, and safe for the environment.
PROVEN RESULTSOur skilled technicians provide roll reports that illustrate the effectiveness of the cleaning service and the condition of your anilox inventory. Deep cleaning will save you money, increase productivity, and extend the life of your anilox rolls.
OUR TECHNOLOGYSani-Blast™ was the pioneer of the sodium bicarbonate method for cleaning of anilox rolls. We’ve been manufacturing sodium bicarbonate cleaning systems and providing cleaning services since 1994. Trust the experts with your cleaning needs!
On-Site at Your Facility:
• In press or off press capabilities• Don’t forget about the glue rolls on your corrugator!• Efficient process that reduces press downtime• Comprehensive roll report illustrates the condition of
each roll before and after cleaning with microscopicphotos and volume measurements
Off-Site at Eaglewood Technologies:
• An economical and speedy alternative for those whoare able to ship their rolls to our facility
• Guaranteed turnaround time of 48 hours• Specify cleaning type with either the Sanilox™ or Laserlox™ roll cleaning systems• Schedule a demonstration of either technology!
The Sani-Blast™ Service uses our proven Sanilox™ technology.
The Sanilox™ media delivery system fractures the media to below six microns when applied at 35 psi – this means the media reaches the bottom of the cell, ensuring the entire cell gets cleaned (not just the walls of the cell). Other media blasters, including plastic, use a lower pressure in order to “recycle” and re-use media. At a lower pressure, the cleaning time can take up to four times as long. “Recycling” units are less effective cleaning machines since the ink and anything else that is being removed gets recycled as well. This means the roller never truly gets cleaned and dried ink is driven into it over and over.
Contact us today for an on-site roll cleaning quote!
HOW IT WORKS
The Laserlox™ Flexi Roll Cleaning System is the most intelligent, environmentally-safe, and effective way of maintaining your anilox inventory. Advanced laser technology, combined with cutting-edge software, allows the user to easily clean ink and coating chemistries of all types. It can also clean multiple narrow web rolls or a combination of narrow and wide web rolls and sleeves with one machine.
Contact Eaglewood Technologies to learn more or schedule a demonstration.
ANILOX ROLL CLEANING SYSTEMS
ANILOX ROLL CLEANING SYSTEMS
ALSO AVAILABLE FROM EAGLEWOOD TECHNOLOGIES:
The Most Advanced Roll Cleaning System in the World
Simple Touch Screen Interface
www.andersonvreeland.com | [email protected] | 866 282.7697
