ANFO LOADER - Jacon · JACON TECHNOLOGIES PTY. LTD. Ph: (612) 9737 9028 | Fax: (612) 9737 9031...
1
JACON TECHNOLOGIES PTY. LTD. Ph: (612) 9737 9028 | Fax: (612) 9737 9031 Email: [email protected] | Web: www.jacon.com.au JACON VIETNAM Ph: +84 (0)61 3569 011-014 | Fax: +84 (0)61 3569 010 Mob: +84 903 399 955 | Web: www.jacon.com.vn WITH JACON TECHNOLOGY, THERE’S ALWAYS A LIGHT AT THE END OF THE TUNNEL Specifications subject to change without notice. ANFO LOADER The Jacon range of Anfo charging units are technologically advanced and designed for transportation and accurate pumping of emulsion in all mining and tunnelling conditions. The Jacon Carriers feature multi-mode 4 wheel steer functionality and variable hydrostatic transmission which allows maximum speed and handle inclines with ease, even when fully laden. The units can be supplied with or without a 2 man working basket • Automatic AFFF Fire Suppression System • DPM Particulate Filter • Enclosed Air conditioned cabin • Second driving cabin on rear • Emergency 24V Hydraulic Power package • 600Kg 2 man Working Basket • On board 130 Hydraulic driven Compressor • High Voltage operation LENGTH: 7.4m WIDTH: 2.2m HEIGHT: 2.6m WEIGHT: 16,180kgs TURNING RADIUS INFORMATION: Inner Radius: 3.6m Outer Radius: 6.7m OPTIONALS DIMENSIONS CARRIER SPECIFICATIONS: • Diesel engine rated at 160 KW @ 2200 RPM. Electronic. Tier 3 • Permanent 4 wheel drive with closed circuit hydrostatic type. • Drive steering axle’s front and back. • Four Wheel Hydrostatic Steering. • Combination Leaf spring and airbag suspension. • Hydraulically applied four wheel internal wet disc brakes. • S.A.H.R Parking brakes. • Catalytic converter • 10.00 x 20, 20 ply tyres wide wall. Spare wheel. • 4 x Hydraulic Stabiliser Legs • Standard with 2 x 500Kg Anfo Charging Kettles BOOM / MANIPULATOR: • Jacon Boom - JSB-600 • 500 Kg @ 8m lifting capacity • 360 Degree Boom Rotation • 9m vertical reach working range • 6m horizontal extension • 120 degree for/back tilt manipulator angles • 360 degree rotation HOSE RETRACT / PUSHER: • Feed Speed 100 metres per minute • Synchronised with pumping rate • Twin hydraulic motor feeds • 26mm to 32mm Nominal Hose diameter, others on request • Stainless Steel construction material SPECIFICATIONS THE JACON ANFO CHARGING UNIT IS A COMPACT CHARGING UNIT DESIGNED AND BUILT FOR TROUBLE FREE OPERATION EVEN IN THE TOUGHEST CONDITIONS A complete and unique solution to explosive charging and transporation of explosives for surface and underground mines and tunnels SPECIFICATION VARIATIONS AVAILABLE ON REQUEST
Transcript of ANFO LOADER - Jacon · JACON TECHNOLOGIES PTY. LTD. Ph: (612) 9737 9028 | Fax: (612) 9737 9031...
JACON TECHNOLOGIES PTY. LTD.Ph: (612) 9737 9028 | Fax: (612) 9737 9031
Email: [email protected] | Web: www.jacon.com.au
JACON VIETNAMPh: +84 (0)61 3569 011-014 | Fax: +84 (0)61 3569 010
Mob: +84 903 399 955 | Web: www.jacon.com.vn
WITH JACON TECHNOLOGY, THERE’S ALWAYS A LIGHT AT THE END OF THE TUNNEL
Specifications subject to change without notice.
ANFO LOADER
The Jacon range of Anfo charging units are technologically advanced and designed for transportation and accurate pumping of emulsion in all mining and tunnelling conditions. The Jacon Carriers feature multi-mode 4 wheel steer functionality and variable hydrostatic transmission which allows maximum speed and handle inclines with ease, even when fully laden. The units can be supplied with or without a 2 man working basket
• Automatic AFFF Fire Suppression System
• DPM Particulate Filter
• Enclosed Air conditioned cabin
• Second driving cabin on rear
• Emergency 24V Hydraulic Power package
• 600Kg 2 man Working Basket
• On board 130 Hydraulic driven Compressor
• High Voltage operation
LENGTH: 7.4mWIDTH: 2.2mHEIGHT: 2.6mWEIGHT: 16,180kgs
TURNING RADIUS INFORMATION:Inner Radius: 3.6m Outer Radius: 6.7m
OPTIONALS DIMENSIONS
CARRIER SPECIFICATIONS:
• Diesel engine rated at 160 KW @ 2200 RPM. Electronic. Tier 3
• Permanent 4 wheel drive with closed circuit hydrostatic type.
• Drive steering axle’s front and back.
• Four Wheel Hydrostatic Steering.
• Combination Leaf spring and airbag suspension.
• Hydraulically applied four wheel internal wet disc brakes.
• S.A.H.R Parking brakes.
• Catalytic converter
• 10.00 x 20, 20 ply tyres wide wall. Spare wheel.
• 4 x Hydraulic Stabiliser Legs
• Standard with 2 x 500Kg Anfo Charging Kettles
BOOM / MANIPULATOR:
• Jacon Boom - JSB-600
• 500 Kg @ 8m lifting capacity
• 360 Degree Boom Rotation
• 9m vertical reach working range
• 6m horizontal extension
• 120 degree for/back tilt manipulator angles
• 360 degree rotation
HOSE RETRACT / PUSHER:
• Feed Speed 100 metres per minute
• Synchronised with pumping rate
• Twin hydraulic motor feeds
• 26mm to 32mm Nominal Hose diameter, others on request
• Stainless Steel construction material
SPECIFICATIONS
THE JACON ANFO CHARGING UNIT IS A COMPACT CHARGING UNIT DESIGNED AND BUILT FOR TROUBLE FREE OPERATION EVEN IN THE TOUGHEST CONDITIONS
A complete and unique solution to explosive charging and transporation of explosives for surface and underground mines and tunnels
SPECIFICATION VARIATIONS AVAILABLE ON REQUEST
