ANANTH KRISHNAMURTHY Professor, Decision Sciences Indian ... · Krishnamurthy, R. Suri and M....

1

ANANTH KRISHNAMURTHY Professor, Decision Sciences

Indian Institute of Management, Bangalore PERSONAL INFORMATION

Ananth Krishnamurthy Gender: Male Nationality: Indian Home address: 520 Plaza Drive, #104, Madison, Wisconsin‐53719, USA. Phone: +1‐608‐358‐4395 Email: [email protected] Website: https://sites.google.com/view/ananth‐krishnamurthy/home

EDUCATION University of Wisconsin – Madison, Madison Ph.D. Industrial Engineering, August 2002 University of Wisconsin – Madison, Madison M.S. Manufacturing Systems Engineering, December 2001 Indian Institute of Technology, Bombay, India B. Tech ‐ M. Tech (5‐Year Integrated), June 1996 PROFESSIONAL EXPERIENCE 12/2015–3/2019 Professor, Department of Industrial and Systems Engineering, University of

Wisconsin‐Madison (UW‐Madison), WI, USA Director, Center for Quick Response Manufacturing, UW‐Madison

1/2008‐12/2015 Associate Professor, Department of Industrial and Systems Engineering, University of Wisconsin‐Madison (UW‐Madison), WI, USA

Director, Center for Quick Response Manufacturing, UW‐Madison 1/2008‐3/2012 Director, Manufacturing Systems Engineering Program, UW‐Madison 9/2005‐12/2007 Assistant Professor, Department of Decision Sciences and Engineering Systems,

Rensselaer Polytechnic Institute, Troy, New York, USA. 7/2005‐8/2005 Visiting Faculty Researcher, Department of Mathematics, IBM TJ Watson

Research Lab, Yorktown Heights, New York. 9/2002‐6/2005 Assistant Professor, Department of Decision Sciences and Engineering Systems,

Rensselaer Polytechnic Institute, Troy, New York, USA. 8/1996‐8/2002 Research Assistant, Center for Quick Response Manufacturing University of Wisconsin‐Madison, WI, USA.

2

RESEARCH INTERESTS Operations Research, Queuing Theory, Stochastic Models and Optimization, Simulation

Design and Analysis of Supply Chains, Warehousing and Logistics, Biomanufacturing, Energy Supply Chains, Manufacturing Systems and Competitiveness, Quick Response Manufacturing,

PUBLICATIONS Refereed Journal Articles (published or accepted‐J) 1. T. Martagan, Y. Limon, A. Krishnamurthy, P. Leland, and T. Foti, 2019. Aldevron Accelerates Growth

Using Operations Research in Biomanufacturing, Interfaces (Accepted). 2. N. Goossens, A. Krishnamurthy and N. Vandaele, 2018, “Analysis of a Fork/Join Station with Inputs

from a Finite Population Sub‐network with Multi‐server Stations,” OR Spectrum (Accepted). 3. T. Martagan, A. Krishnamurthy, and P. Leland, 2018, “Managing Trade‐offs in Protein

Manufacturing: How Much is Too Much Waste?” Manufacturing, Service and Operations Management (Accepted).

4. T. Martagan, A. Krishnamurthy, P. Leland, and C. Maravelias, 2018, “Performance Guarantees and Optimal Purification Decisions for Engineered Proteins,” Operations Research Vol. 66, No. 1, pp. 18‐41.

5. M. Ozen and A. Krishnamurthy, 2018, “Evaluating Relief Center Designs for Disaster Relief Distribution, Journal of Humanitarian Logistics and Supply Chain Management, Vol. 8 No. 1, pp. 22‐48.

6. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2017, “A Multi‐Tier Linking Approach to Analyze Performance of Autonomous Vehicle‐based Storage and Retrieval Systems,” Computers and Operations Research, Vol. 83, pp. 173‐188

7. T. Martagan, A. Krishnamurthy, P. Leland, and C. Maravelias, 2016, “Optimal Purification Decisions for Engineer‐to‐order Proteins at Aldevron,” Production and Operations Management, Vol. 25, No.12, pp. 2003‐2005.

8. S. Bhat and A. Krishnamurthy, 2016, “Production Control Policies to Maintain Service Levels in Different Seasons,” Journal of Manufacturing Systems, Vol. 41, pp. 31–44.

9. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2015, “Queuing Models to Analyze Dwell‐point and Cross‐aisle Location in Autonomous Vehicle‐based Warehouse Systems”, European Journal of Operational Research Vol. 242, No. 1, pp. 72‐87.

10. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2016, “A Simulation Study of Blocking Effects in Warehouse Systems with Autonomous Vehicles,” European Journal of Industrial Engineering, Vol.10, No.1, pp.51 – 80.

11. T. Martagan, A. Krishnamurthy, and C. Maravelias, 2015, “Condition‐based Harvesting Policies for Upstream Bioreactor Operations Subject to Batch Failures,” IIE Transactions Vol. 48, No. 5, pp. 440‐461.

12. A. Sinha, A. Krishnamurthy, 2015, “Dual Index Production and Sub‐Contracting Policies for Assemble‐to‐Order Systems”, IIE Transactions, Vol. 48, No. 5, pp. 415‐427.

13. A. Sinha, T. Davich, and A. Krishnamurthy, 2015, “Optimization of Production and Subcontracting Strategies”, International Journal of Production Research, Vol. 54, No. 8, pp. 2377‐2393.

14. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2015, “Stochastic models for Unit‐Load Operations in Warehouses with Autonomous Vehicles,” Annals of Operations Research, Vol. 231, pp. 129‐155.

3

15. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2015, “Queuing Models to Analyze Dwell‐point and Cross‐aisle Location in Autonomous Vehicle‐based Warehouse Systems”, European Journal of Operational Research Vol. 242, No. 1, pp. 72‐87.

16. S. Bhat and A. Krishnamurthy, 2015, “Interactive Effects of Seasonal Demand Characteristics on Manufacturing Systems,” International Journal of Production Research, Vol. 54, No. 10, pp. 2951‐2964.

17. S. Bhat, A. Krishnamurthy, 2015, “Value of Capacity Flexibility in Manufacturing Systems with Seasonal Demands,” IIE Transactions, Vol. 47 No.7, pp. 693‐714.

18. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2015, “Stochastic models for Unit‐Load Operations in Warehouses with Autonomous Vehicles,” Annals of Operations Research, Vol. 231, pp. 129‐155.

19. B. Ekren, S.S. Heragu, A. Krishnamurthy and C.J. Malmborg, 2014, “Matrix‐Geometric Solution for Semi‐Open Queuing Network Model of Autonomous Vehicle Storage and Retrieval System,” Computers and Industrial Engineering, Vol. 68, pp. 78‐86.

20. J. Gong, J.E. Mitchell, A. Krishnamurthy, and W. A. Wallace, 2014, “An Interdependent Layered Network Model for a Resilient Supply Chain,” Omega, Vol. 46, pp. 104–116

21. B. Ekren S.S. Heragu, A. Krishnamurthy and C.J. Malmborg, 2013, “An Approximate Solution for Semi‐Open Queuing Network Model of Autonomous Vehicle Storage and Retrieval System,” IEEE Transactions on Automation and Systems Engineering, Vol. 10, No. 1, pp. 205‐215.

22. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2013, “Blocking Effects in Warehouse Systems with Autonomous Vehicles,” IEEE Transactions on Automation and Systems Engineering, Vol. 11, No. 2, pp. 439‐451.

23. K. Satyam and A. Krishnamurthy, 2013, “Performance Analysis of CONWIP Systems with Batch Size Constraints,” Annals of Operations Research, Vol. 209, No. 1, pp. 85‐114.

24. K. Satyam, A. Krishnamurthy and M. Kamath, 2013, “Solving General Multi‐class Closed Queuing Networks using Parametric Decomposition,” Computers and Operations Research Vol. 40, pp. 1777‐1789.

25. R. Ramakrishnan and A. Krishnamurthy, 2012, “Performance Evaluation of a Synchronization Station with Multiple Inputs and Population Constraints,” Computers and Operations Research, Vol. 39, No. 3, pp. 560‐570.

26. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2012, “Performance Analysis and Design Tradeoffs in Warehouses with Autonomous Vehicle Technology,” IIE Transactions, Vol. 44, pp. 1045‐1060.

27. L. Zhang, A. Krishnamurthy, C.J. Malmborg and S.S. Heragu, 2011, “Performance Modeling of Autonomous Vehicle Storage and Retrieval Systems with Generally Distributed Service Times,” European Journal of Industrial Engineering, Vol. 5, No. 4, pp. 448‐470.

28. S.S. Heragu, C. Xiao, A. Krishnamurthy and C.J. Malmborg, 2011, “Analytical Models for Analysis of Automated Warehouse Material Handling Systems,” International Journal of Production Research, Vol. 49, No. 22, pp. 6833‐6861.

29. B. Ekren, S.S. Heragu, A. Krishnamurthy and C.J. Malmborg, 2010, “Simulation Based Experimental Design to Identify Factors Affecting Performance of AVS/RS,” Computers & Industrial Engineering, Vol.58, No. 1, pp. 175‐185.

30. A. Krishnamurthy and R. Suri, 2009, “Planning and Implementing POLCA: A Card‐Based Control System for High Variety or Custom Engineered Products,” Production Planning and Control, Vol. 20, No.7, pp. 596‐610.

31. L. Zhang, A. Krishnamurthy, C.J. Malmborg and S.S. Heragu, 2009, “Variance‐Based Approximations of Transaction Waiting Times in Autonomous Vehicle Storage and Retrieval Systems,” European Journal of Industrial Engineering, Vol. 3, No. 2, pp. 146‐169.

4

32. N. Jaggi, K. Kar and A. Krishnamurthy, 2009, “Rechargeable Sensor Activation under Temporally Correlated Events,” Rechargeable Sensor Activation under Temporally Correlated Events,” Wireless Networks Vol. 15, No. 5, pp. 619‐635.

33. R. Ramakrishnan and A. Krishnamurthy, 2008, “Analysis of Kitting Operations in Manufacturing Systems,” Asia Pacific Journal of Operations Research, Vol. 25, No. 2, pp. 187‐216.

34. K. Satyam and A. Krishnamurthy, 2008, “Analytical Models for Multi‐Product Manufacturing Systems Operating under CONWIP Control Policies,” IIE Transactions, Vol. 40, No. 3, pp. 252 ‐ 264.

35. N. Jaggi, K. Kar and A. Krishnamurthy, 2008, “Near‐Optimal Activation Policies in Rechargeable Sensor Networks under Spatial Correlations,” ACM Transactions on Sensor Networks (TOSN), Vol. 4, Issue 3, No. 17, pp. 1‐36.

36. P‐H. Kuo, A. Krishnamurthy and C.J. Malmborg, 2008, “Performance Modeling of Autonomous Vehicle Storage and Retrieval Systems Using Class‐Based Storage Policies,” International Journal of Computer Applications in Technology, Vol. 31, No. 3/4, pp. 238‐248.

37. D. Claudio and A. Krishnamurthy, 2008, “Kanban‐based Pull Systems with Advance Demand Information,” International Journal of Production Research, Vol. 47, No. 12, pp. 3139‐3160.

38. P‐H. Kuo, A. Krishnamurthy and C.J. Malmborg, 2007, “Design Models for Unit Load Storage and Retrieval Systems Using Autonomous Vehicle Technology and Resource Conserving Storage and Dwell Point Policies,” Applied Mathematical Modeling, Vol. 31, pp. 2332‐2346.

39. O. Al‐Araidah, A. Krishnamurthy and C.J. Malmborg, 2007, “A Comparative Study of Single‐Phase and Two‐Phase Approaches for the Layout Problem with Material Handling Costs,” International Journal of Production Research, Vol. 45, No. 4, pp. 951‐970.

40. A. Krishnamurthy and R. Suri, 2006, “Performance Analysis of Single Stage Kanban Controlled Production Systems using Parametric Decomposition,” Queuing Systems: Theory and Applications, Vol. 54, pp. 141‐162.

41. O. Al‐Araidah, A. Krishnamurthy and C.J. Malmborg, 2006, “A Two‐Stage Simulated Annealing Procedure for Block Layout Problems,” International Journal of Production Research, Vol. 44, No. 20, pp. 4417‐4429.

42. K. Kar, A. Krishnamurthy and N. Jaggi, 2006, “Dynamic Node Activation in Networks of Rechargeable Sensors,” IEEE/ACM Transactions in Networking, Vol. 14, No. 1, pp. 15 ‐ 26.

43. J. Granger, A. Krishnamurthy and S.M. Robinson, 2006, “Rapid Improvement of Stochastic Networks using Two‐Moment Approximations,” Mathematical and Computer Modeling, Vol. 43, pp. 1038‐1060.

44. J.M. Tien, A. Krishnamurthy and A. Yasar, 2004, “Towards Real‐Time Customized Management of Supply and Demand Chains,” Journal of Systems Science and Systems Engineering, Vol. 13, No. 3, pp. 129‐151.

45. A. Krishnamurthy, R. Suri and M. Vernon, 2004, “Re‐examining the Performance of MRP and Kanban Material Control Strategies for Multi‐Product Flexible Manufacturing Systems,” International Journal of Flexible Manufacturing Systems, Vol. 16, pp. 123‐150.

46. A. Krishnamurthy, R. Suri and M. Vernon, 2004, “Analysis of a Fork/Join Station with Inputs from Coxian Servers in a Closed Queuing Network,” Annals of Operations Research, Vol. 125, pp. 69‐94.

Refereed Journal Articles (under review‐R) 1. A.K. Sinha, and A. Krishnamurthy, 2019. “Production and Capacity Utilization Strategies in Supply

Chain for Complex Engineered Products.,” Production and Operations Management (under review). 2. M. Ozen and A. Krishnamurthy, 2019, “Evaluation of Intervention Strategies for Disaster Relief

Distribution, European Journal of Operations Research (under review). 3. R. Suman and A. Krishnamurthy, 2019, “Stochastic Models for Serial Network of Polling Queues,”

Annals of Operations Research (under review).

5

4. R. Suman and A. Krishnamurthy, 2019, “Conditional Waiting Time Analysis in a Serial Network of Polling Queues,” OR Spectrum (under review).

5. Y. Limon and A. Krishnamurthy, 2019, “Stochastic Models for Resource Allocation in Biomanufacturing Operations,” IIE Transactions (under review).

Journal Articles (in preparation‐P) 1. T. Martagan, Y. Limon, A. Krishnamurthy, 2019. Supply Chain Contracts for Biomanufacturing, to be

submitted to Management Science. 2. M. Ozen and A. Krishnamurthy, 2019, “Models to Quantify Material Convergence in Disaster Relief

Operations,” to be submitted to European Journal of Operations Research. 3. R. Ramakrishnan, and A. Krishnamurthy, 2019, “Analytical Models for Fabrication/Assembly

Systems,” to be submitted to Production and Operations Management. 4. K. Satyam and A. Krishnamurthy, 2019, “Analytical Models for Evaluating Product Variety and Loop

Length Tradeoffs in Multi‐Stage Pull Systems,” to be submitted to Production and Operations Management

5. D. Ge, A. Krishnamurthy and O. Alagoz, 2019, “Optimal Release Policy for Kanban Controlled Systems with Advance Demand Information,” to be submitted to European Journal of Operations Research.

Refereed Book Chapters Articles (published or accepted‐B) 1. M. Ozen and A. Krishnamurthy, 2014, “Adaptive Configuration and Coordination in a Network of

Relief Centers,” Proceedings of the 13th International Material Handling Research Colloquium

(IMHRC), Cincinnati, USA.

2. A. Krishnamurthy, D. Roy and S. Bhat, 2013, “Performance Trade‐offs in Layouts for Distribution of Supplies at Relief Centers,” in Humanitarian and Relief Logistics: Research Issues, Case Studies and Future Trends, Springer Series Operations Research/ Computer Science (ORCS), pp. 21‐30.

3. A. Krishnamurthy, D. Roy and S. Bhat, 2012, “Performance Trade‐offs in Layouts for Distribution of Supplies at Relief Centers,” Proceedings of the 12th International Material Handling Research Colloquium (IMHRC), Gardanne, France.

4. A. Krishnamurthy, D. Roy, S.S. Heragu and C.J. Malmborg, 2010, “Blocking Effects on Performance of Warehouse Systems with Autonomous Vehicles,” Proceedings of the 11th International Material Handling Research Colloquium (IMHRC), Milwaukee, USA.

5. A. Krishnamurthy and D. Seethapathy, 2010, “Production Inventory Models for a Multi‐Product Batch Production System,” Proceedings of the 2nd Conference on Rapid Modeling, Neuchatel, Switzerland.

6. D. Ge and A. Krishnamurthy, 2009, “Integrating Kanban Control with Advance Demand Information: Insights from an Analytical Model,” Proceedings of the 1st Conference on Rapid Modeling, Neuchatel, Switzerland.

7. L. Zhang, A. Krishnamurthy, C.J. Malmborg and S.S. Heragu, 2008, “Specialized Queueing Models for Autonomous Vehicle Automated Storage and Retrieval Systems,” in Progress in Material Handling Research: 2008, K. Ellis, R. Meller, M.K. Ogle, B.A. Peters, G.D. Taylor and J.S. Usher (Editors), The Material Handling Institute, Charlotte, NC.

8. S.S. Heragu, X. Cai, A. Krishnamurthy and C.J. Malmborg, 2008, “Open Queueing Network Model for an Autonomous Vehicle Automated Storage/Retrieval System,” in Progress in Material Handling Research: 2008, K. Ellis, R. Meller, M.K. Ogle, B.A. Peters, G.D. Taylor and J.S. Usher (Editors), The Material Handling Institute, Charlotte, NC.

6

9. N. Jaggi, K. Kar and A. Krishnamurthy, 2008, “Dynamic Sleep Scheduling in Rechargeable Sensors,” Handbook of Wireless Mesh & Sensor Networks, G. Aggelou (Editor).

10. O. Al‐Araidah, A. Krishnamurthy and C.J. Malmborg, 2007, “Simultaneous Facility Layout and Materials Handling System Design,” Facility Logistics: Solution Approaches to Emerging Challenges, Kevin Gue and Maher Lahmar (Editors).

11. A. Krishnamurthy, 2006, “From Just in Time Manufacturing to On‐Demand Services,” in Service Enterprise Integration: an Enterprise System Engineering Perspective, Cheng Hsu (Editor), Norwell, MA, Springer.

12. J. Granger, A. Krishnamurthy and S.M. Robinson, 2002, “Approximation and Optimization for Stochastic Networks,” in Dynamic Stochastic Optimization (Lecture Notes in Economics and Mathematical Systems No. 532) K. Marti, Y. Ermoliev, and G. Pflug (Editors), Springer‐Verlag, Berlin, pp. 67‐79.

13. A. Krishnamurthy, R. Suri, and M. Vernon, 2003, “Two‐Moment Approximations for Throughput and Mean Queue Length of a Fork/Join Station with General Input Processes,” in Stochastic Modeling and Optimization of Manufacturing Systems and Supply Chains, J.G. Shanthikumar, D.D. Yao and W.H.M. Zijm (Editors), Kluwer International Series in Operations Research and Management Science, pp. 87‐126.

Refereed Conference Papers (published or accepted for publication‐C) 1. R. Suman and A. Krishnamurthy, 2018, “Stochastic Models for Serial Network of Polling Queues,”

Proceedings of the 2018 Industrial and Systems Engineering Research Conference, Orlando, FL. 2. Y. Limon and A. Krishnamurthy, 2018, “Stochastic Models for Resource Scheduling in

Biomanufacturing Operations,” Proceedings of the 2018 Industrial and Systems Engineering

Research Conference, Orlando, FL. 3. M. Ozen and A. Krishnamurthy, 2015, “Performance Evaluation of Relief Centers at Disaster Sites”,

Proceedings of the 2015 Industrial and Systems Engineering Research Conference, Nashville, TN. 4. T. Martagan and A. Krishnamurthy, 2015, “Stochastic Optimization of Protein Purification

Operations”, Proceedings of the 2015 Industrial and Systems Engineering Research Conference, Nashville, TN.

5. S. Bhat and A. Krishnamurthy, 2015, “Resource Allocation Policies to provide Differentiated Service Levels to Customers”, Proceedings of 2015 Canadian Operations Research Society (CORS) Annual Meeting, Montreal, Canada.

6. A.K. Sinha and A. Krishnamurthy, 2015, “Strategic Sourcing in Supply Chains with Risk of Information Leakage and Competition,” Proceedings of the 2015 Industrial and Systems Engineering Research Conference, Nashville, TN.

7. A.K. Sinha and A. Krishnamurthy, 2014, “Optimal Control Policy for Multi‐Product Assemble‐To‐Order Systems, “Proceedings of the 2014 Industrial and Systems Engineering Research Conference, Montreal, Canada.

8. M. Ozen and A. Krishnamurthy, 2014, “Adaptive Configuration and Coordination in a Network of Relief Centers, “Proceedings of the 2014 Industrial and Systems Engineering Research Conference, Montreal, Canada.

9. A.K. Sinha and A. Krishnamurthy, 2013, “Comparison of Subcontracting Policies for Assemble‐To‐Order Systems with Service Level Constraints, “Proceedings of the 9th IEEE International Conference on Automation Science and Engineering, Madison, WI.

10. S. Bhat and A. Krishnamurthy, 2013, “Flexible Policies for Multi‐Class Systems with Seasonal Demands,” Proceedings of the 2013 Industrial and Systems Engineering Research Conference, San Juan, PR.

11. T. Martagan and A. Krishnamurthy, 2013, “Condition‐based Harvesting Policies for Upstream

7

Bioreactor Operations Subject to Batch Failures,” Proceedings of the 2013 Industrial and Systems Engineering Research Conference, San Juan, PR.

12. M. Ozen and A. Krishnamurthy, 2013, “Models to Evaluate Layout and Staffing Policies at Relief Centers, “Proceedings of the 2013 Industrial and Systems Engineering Research Conference, San Juan, PR.

13. A.K. Sinha and A. Krishnamurthy, 2013, “Subcontracting Policies in Assemble‐to‐Order Systems, “Proceedings of the 2013 Industrial and Systems Engineering Research Conference, San Juan, PR.

14. S. Bhat and A. Krishnamurthy, 2013, “Optimal Policies for Production Systems with Seasonal Demands,” Proceedings of the 9th Conference on Stochastic Models for Manufacturing and Service Systems, Seeon, Germany.

15. S. Bhat, A. Krishnamurthy, 2012, “Base Stock Policies for Manufacturing Systems under Periodic Demands,” Proceedings of the 2012 Industrial Engineering Conference, Orlando, FL.

16. T. Martagan, A. Krishnamurthy, 2012, “Control and Optimization of Bio‐processes using Markov Decision Processes,” Proceedings of the 2012 Industrial and Systems Engineering Research Conference, Orlando, FL.

17. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2011, “Improving Throughput Capacity in Multi‐Tier Warehouses with Autonomous Vehicles,” Proceedings of the 2011 Industrial Engineering Conference, Reno, NV. (Best paper in Facility Logistics Track)

18. D. Ge and A. Krishnamurthy, 2011, “Pull Systems with Advance Demand Information: Effect of Information Quality,” Proceedings of the 2011 Industrial Engineering Conference, Reno, NV.

19. A. Hariharan and A. Krishnamurthy, 2011, “Production Inventory Policies for the Manufacturing of Bio‐Tech Products,” Proceedings of the 2011 Industrial Engineering Conference, Reno, NV.

20. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2011, “Performance Analysis of Unit‐load Transfer Systems in Multi‐Tier Warehouses with Autonomous Vehicles,” Proceedings of the 44th CIRP International Conference on Manufacturing Systems, Madison, WI.

21. D. Seethapathy and A. Krishnamurthy, 2011, “Impact of Product Variety on Performance of Multi‐Product Batch Production Systems,” Proceedings of the 44th CIRP International Conference on Manufacturing Systems, Madison, WI.

22. D. Ge and A. Krishnamurthy, 2011, “Effect of Quality of Advance Demand Information in Kanban Controlled Manufacturing Systems,” Proceedings of the 44th CIRP International Conference on Manufacturing Systems, Madison, WI.

23. A. Krishnamurthy and D. Roy, 2011, “Queuing Models for Unit Load Warehouse Systems using Autonomous Vehicles,” Proceedings of the 8th Conference on Stochastic Models for Manufacturing and Service Systems, Kusadasi, Turkey.

24. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2010, “Vehicle Interference Effects in Warehousing Systems with Autonomous Vehicles,” Proceedings of the 2010 IEEE Conference on Automation Science and Engineering, Toronto, Canada.

25. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2010, “Vehicle Interference Effects in Warehousing Systems with Autonomous Vehicles,” Proceedings of the 2010 Industrial Engineering Conference, Cancun, MX.

26. D. Ge and A. Krishnamurthy, 2010, “Integrating Advance Demand Information in Supply Chain Contracts,” Proceedings of the 2010 IEEE Conference on Automation Science and Engineering, Toronto, Canada. (Best Paper Award, Finalist)

27. D. Ge and A. Krishnamurthy, 2010, “Supply Chain Contracts in the Presence of Advance Demand Information,” Proceedings of the 2010 Industrial Engineering Conference, Cancun, MX.

28. B. Ekren, S.S. Heragu, A. Krishnamurthy and C.J. Malmborg, 2009, “Simulation Based Experimental Design to Identify Factors Affecting Performance of AVS/RS,” Proceedings of the 2009 Industrial Engineering Conference, Miami, FL.

8

29. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2009, “Design Insights for Autonomous Vehicle Based Storage Retrieval Systems,” Proceedings of the 2009 Industrial Engineering Conference, Miami, FL.

30. D. Ge and A. Krishnamurthy, 2009, “Using Demand Information Aggregation to Improve Order Fulfillment,” Proceedings of the 2009 Industrial Engineering Conference, Miami, FL.

31. D. Ge and A. Krishnamurthy, 2009, “Optimal Policies for Kanban Control Systems with Advance Demand Information,” 7th Conference on Stochastic Models of Manufacturing and Service Operations, Ostuni, Italy.

32. D. Ge and A. Krishnamurthy, 2009, “Optimal Release Policy for Kanban Control Systems with Advance Demand Information,” Manufacturing and Service Operations Management Conference, Boston, MA.

33. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2009, “Design Insights for Warehouses based on Autonomous Vehicle Technology,” Manufacturing and Service Operations Management Conference, Boston, MA.

34. B. Ekren, S.S. Heragu, A. Krishnamurthy and C.J. Malmborg, 2009, “Semi‐Open Queuing Network Approach for Modeling Autonomous Vehicle Storage and Retrieval System,” Proceedings of the 2009 Factory Automation and Information Management Conference, Middlesbrough, UK.

35. X. Cai, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2009, “Analysis of Autonomous Vehicle Storage and Retrieval System by Open Queuing Network,” Proceedings of the 2009 IEEE Conference on Automation Science and Engineering, Bangalore, India.

36. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2009, “Impact of Zones on Throughput and Cycle Times in Warehouses with Autonomous Vehicles,” Proceedings of the 2009 IEEE Conference on Automation Science and Engineering, Bangalore, India.

37. A. Krishnamurthy, D. Roy, S.S. Heragu and C.J. Malmborg, 2009, “Design and Operational Insights for Autonomous Vehicle based Storage and Retrieval Systems,” Proceedings of the 2009 International Conference on Value Chain Sustainability, Louisville, KY.

38. S.S. Heragu, X. Cai, A. Krishnamurthy and C.J. Malmborg, 2008, “Analytical Model for Autonomous Vehicle Storage/Retrieval Systems,” Proceedings of the 2008 Industrial Engineering Conference, Vancouver, B.C.

39. A. Krishnamurthy, L. Zhang, C.J. Malmborg and S.S. Heragu, 2008, “Lift Queue Dynamics in Autonomous Vehicle Automated Storage and Retrieval Systems,” Proceedings of the 2008 Industrial Engineering Conference, Vancouver, B.C.

40. D. Ge and A. Krishnamurthy, 2008, “Integrating Kanban Control with Advance Demand Information: Insights from an Analytical Model,” Proceedings of the 2008 Industrial Engineering Conference, Vancouver, B.C.

41. S.S. Heragu, X. Cai, A. Krishnamurthy and C.J. Malmborg, 2008, “Web Interface for the Conceptualization of AVS/RS and AS/RS,” Proceedings of the 2008 Factory Automation and Information Management Conference, Skovde, Sweden.

42. K. Satyam and A. Krishnamurthy, 2007, “Effect of Product Variety and Loop Length in Multi‐Stage Pull Systems,” Proceedings of Industrial Engineering Research Conference, Nashville, TN.

43. R. Ramakrishnan and A. Krishnamurthy, 2007, “Performance Evaluation of Multi‐Product Fabrication/Assembly Systems,” Proceedings of 2007 Industrial Engineering Research Conference, Nashville, TN.

44. D. Ge and A. Krishnamurthy, 2007, “Performance Evaluation of the Extended Kanban Control System with Advance Demand Information,” Proceedings of 2007 Industrial Engineering Research Conference, Nashville, TN. (Awarded best paper in Manufacturing Systems Track)

9

45. R. Ramakrishnan and A. Krishnamurthy, 2007, “Queuing Models of Fabrication/Assembly Systems with Multiple End Products,” Proceedings of the Sixth International Conference on Analysis of Manufacturing Systems, Eindhoven, The Netherlands.

46. N. Goossens, A. Krishnamurthy and N. Vandaele, 2007, “Analysis of a Fork/Join Station with Inputs from a Finite Population Sub‐network with Multi‐Server Stations,” Proceedings of the Manufacturing Service and Operations Management Society Conference, Beijing, China.

47. N. Jaggi, K. Kar and A. Krishnamurthy, 2007, “Rechargeable Sensor Activation under Temporally Correlated Events,” Proceedings of the 5th International Symposium on Modeling and Optimization in Mobile Ad Hoc and Wireless Networks (WiOpt), Cyprus.

48. K. Satyam and A. Krishnamurthy, 2006, “Analytical Models for Multi‐Product Pull Systems with Batch Sizes,” Proceedings of 2006 Industrial Engineering Research Conference, Orlando, FL. (Awarded best paper in Manufacturing Design Track)

49. V. Cesani, A. Krishnamurthy and M.M. Ruiz, 2006, “Perceived Influence of Information Sharing in Company Performance,” Proceedings of 2006 Industrial Engineering Research Conference, Orlando, FL.

50. A. Krishnamurthy and D. Claudio, 2006, “Impact of Information Quality in Hybrid Production Inventory Control Systems,” Proceedings of 2006 Industrial Engineering Research Conference, Orlando, FL.

51. R. Ramakrishnan and A. Krishnamurthy, 2006, “Analytical Models for Production Networks with Assembly Operations,” Proceedings of 2006 Industrial Engineering Research Conference, Orlando, FL. (Awarded best paper in Production Planning and Scheduling Track)

52. K. Satyam and A. Krishnamurthy, 2005, “A Parametric Decomposition Based Approach for Multi‐class Closed Queuing Networks with Synchronization Stations,” Proceedings of the Fifth International Conference on Analysis of Manufacturing Systems: Production Management, Zakynthos, Greece.

53. R. Ramakrishnan and A. Krishnamurthy, 2005, “Analytical Approximations for Kitting Systems with Multiple Inputs,” Proceedings of 2005 Industrial Engineering Research Conference, Atlanta, GA. (Awarded best paper in Production Planning and Scheduling Track)

54. R. Ramakrishnan and A. Krishnamurthy, 2005, “Analytical Models for Analysis of Disassembly and Assembly Operations at Repair Facilities,” Proceedings of the Manufacturing Service and Operations Management Society Conference, Chicago, IL.

55. K. Satyam and A. Krishnamurthy, 2005, “Performance of Pull Strategies in Multi‐Product Systems with Shared Resources,” Proceedings of 2005 Industrial Engineering Research Conference, Atlanta, GA.

56. A. Krishnamurthy and D. Claudio, 2005, “Pull Systems with Advanced Demand Information,” Proceedings of the 2005 Winter Simulation Conference, M. E. Kuhl, N. M. Steiger, F. B. Armstrong, and J. A. Joines (Editors), pp. 1733‐1742.

57. K. Kar, A. Krishnamurthy and N. Jaggi, 2005, “Dynamic Node Activation in Networks of Rechargeable Sensors,” Proceedings of Infocom 2005, Miami, FL. (Runner‐up for the best paper award in Infocom 2005)

58. N. Jaggi, K. Kar and A. Krishnamurthy, 2005, “Utility Maximizing Node Activation Policies in Networks of Partially Rechargeable Sensors,” Proceedings of 39th Annual Conference on Information Sciences and Systems (CISS), Baltimore, MD.

59. J.M. Tien, A. Krishnamurthy and A. Yasar, 2004, “A Taxonomic Approach to Real‐Time Mass Customization,” Proceedings of the 2004 IEEE International Conference on Systems, Man & Cybernetics (IEEE‐SMC), Hague, The Netherlands.

60. A. Krishnamurthy and R. Suri, 2004, “Analytical Models for Pull‐type Control Strategies in Manufacturing Systems,” Proceedings of 2004 Industrial Engineering Research Conference, Houston, TX.

10

61. A. Krishnamurthy, R. Suri and M. Vernon, 2003, “Approximations for a Fork/Join Station with Inputs from Finite Populations,” Proceedings of 2003 Industrial Engineering Research Conference, Portland, OR.

62. R. Suri and A. Krishnamurthy, 2003, “Planning and Implementing POLCA: A Card‐based Control System for High Variety or Custom Engineered Products,” Proceedings of FAIM 2003: The International Conference on Flexible Automation & Intelligent Manufacturing, Tampa, FL.

63. A. Krishnamurthy, R. Suri and M. Vernon, 2001, “Two Moment Approximations for Fork/Join Station with Applications to Modeling Kanban Systems,” Proceedings of Production and Operations Management Conference, Orlando, FL.

64. J. Granger, A. Krishnamurthy and S.M. Robinson, 2001, “Stochastic Modeling of Airlift Operations,” Proceedings of the 2001 Winter Simulation Conference, B. A. Peters, J. S. Smith, D. J. Medeiros, and M. W. Rohrer (Editors), pp. 432‐440.

65. A. Krishnamurthy, R. Suri and M. Vernon, 2000, “A New Approach for Analyzing Queuing Models of Material Control Strategies in Manufacturing Systems,” Proceedings of the 4th International Workshop on Queuing Networks with Finite Capacity (QNETs2000), West Yorkshire, U.K.

66. A. Krishnamurthy, R. Suri and M. Vernon, 2000, “Push Can Perform better than Pull for Flexible Manufacturing Systems with Multiple Products,” Proceedings of 2000 Industrial Engineering Research Conference, Cleveland, OH.

Refereed Conference Papers (under review) None Refereed Academic Cases (published or accepted for publication‐A) 1. A. Krishnamurthy, 2016, “Implementing POLCA Control System at Margin Foundries Inc.”, Case No.

QRM‐16‐05, University of Wisconsin‐Madison, USA. 2. A. Krishnamurthy, 2015, “To Push or Pull at ACE Gears Inc.”, Case No. QRM‐15‐01, University of

Wisconsin‐Madison, USA. 3. A. Krishnamurthy, 2014, “Improving Office Operations at Flow Meter Solutions, Inc.”, Case No. QRM‐

14‐03, University of Wisconsin‐Madison, USA. 4. A. Krishnamurthy, 2013, “Streamlining Quoting and Order Processing at Gulliver Motor Homes Inc.”,

Case No. QRM‐13‐07, University of Wisconsin‐Madison, USA. 5. A. Krishnamurthy, 2012, “Is There a Case for Implementing Shop‐floor Cells at Milwaukee

Transmissions Inc.?”, Case No. QRM‐12‐01, University of Wisconsin‐Madison, USA. 6. A. Krishnamurthy, 2011, “Transforming a Job‐shop Layout into Shop‐floor Cells at Wisconsin‐

Wireform Inc.”, Case No. QRM‐11‐08, University of Wisconsin‐Madison, USA. Non‐refereed Journals and Conference Proceedings 1. S. Bhat and A. Krishnamurthy, 2012, “Base‐stock Policy for a Manufacturing System with Periodic

Demands", Proceedings of the 2012 NSF Design, Service and Manufacturing Grantees and Research Conference, Boston, MA

2. A. Krishnamurthy, 2011, “Developing an ROI for Technology Investments,” Material Handling Logistics Conference, Salt Lake City, UT.

3. D. Roy, A. Krishnamurthy, C.J. Malmborg and S.S. Heragu, 2009, “Design Insights for an Autonomous Vehicles‐based Storage and Retrieval Systems,” Proceedings of the 2009 NSF Design, Service and Manufacturing Grantees and Research Conference, Honolulu, Hawaii.

11

4. D. Ge, A. Krishnamurthy and O. Alagoz, 2009, “Optimal Release Policy for Kanban Control Systems with Imperfect Advance Demand Information,” Proceedings of the 2009 NSF Design, Service and Manufacturing Grantees and Research Conference, Honolulu, Hawaii.

5. L. Zhang, C.J. Malmborg, A. Krishnamurthy and S.S. Heragu, 2008, “Service Time Variance Modeling in Autonomous Vehicle Storage and Retrieval System Cycle Time Estimation,” Proceedings of the 2008 NSF Design, Service and Manufacturing Grantees and Research Conference, Knoxville, TN.

6. K. Satyam and A. Krishnamurthy, 2008, “A Parametric Decomposition Based Approach for Multi‐class Closed Queuing Networks with Synchronization Stations,” Proceedings of the 2008 NSF Design, Service and Manufacturing Grantees and Research Conference, Knoxville, TN.

7. P‐H. Kuo, A. Krishnamurthy, C.J. Malmborg and S.S. Heragu, 2006, “Design Models for Unit Load Storage and Retrieval Systems Using Autonomous Vehicle Technology and Resource Conserving Storage and Dwell Point Policies,” Proceedings of the 2006 Design, Service, and Manufacturing Grantees and Research Conference, St Louis, MO.

8. A. Krishnamurthy, R. Suri and M. Vernon, 2001, “Two Moment Approximations for Fork/Join Station with Applications to Modeling Kanban Systems,” Proceedings of Production and Operations Management Conference, Orlando, FL.

Abstracts, Posters, Letters of Correspondence, Book Reviews, etc. 1. Y. Limon, T. Martagan and A. Krishnamurthy, 2019, “Supply Chain Contracts for Biopharmaceutical

Projects”, Proceedings of 2019 Production and Operations Management Society (POMS) Conference, Washington, DC.

2. R. Suman and A. Krishnamurthy, 2019, “Analysis of Tandem Polling Queues Using Decomposition", Proceedings of 2019 Production and Operations Management (POMS) Annual Meeting, Washington D.C.

3. Y. Limon, T. Martagan and A. Krishnamurthy, 2018, “Contract Structures for Biopharmaceutical Projects with Failure Risks”, Proceedings of 2018 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Phoenix, AZ.

4. T. Martagan, Y. Limon and A. Krishnamurthy, 2018, “Biomanufacturing Companies Accelerate Growth Using Operations Research”, Proceedings of 2018 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Phoenix, AZ.

5. Y. Limon and A. Krishnamurthy, 2018, “Stochastic Models for Multi‐Resource Allocation in Biomanufacturing”, Proceedings of 2018 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Phoenix, AZ.

6. Y. Limon and A. Krishnamurthy, 2018, “Stochastic Models for Multi‐Resource Allocation in Biomanufacturing”, Proceedings of 2018 Institute of Industrial and Systems Engineers (IISE) Annual Conference, Orlando, FL.

7. Y. Limon and A. Krishnamurthy, 2018, “Stochastic Models for Optimal Resource Allocation and Scheduling of Biomanufacturing Projects”, 7th Annual Symposium on Industrial Systems and Engineering Research, Design, and Practice, Madison, WI.

8. R. Suman and A. Krishnamurthy, 2018, “Matrix‐decomposition analysis of polling queues in series", Proceedings of 2018 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Phoenix, AZ.

9. R. Suman and A. Krishnamurthy, 2018, “Multi‐criteria evaluation of supply chain structures", Proceedings of 2018 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Phoenix, AZ.

10. R. Suman and A. Krishnamurthy, 2018, “Parametric approach for developing quick quotes in fabrication", Proceedings of 2018 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Phoenix, AZ.

12

11. R. Suman and A. Krishnamurthy, 2017, “Stochastic Models for Polling Queues,” Proceedings of 2017 Institute for Operations Research and Management Science(INFORMS) Annual Meeting, Houston, TX

12. Y. Limon and A. Krishnamurthy, 2017, “Stochastic Models for Resource Scheduling in Biomanufacturing Operations,” Proceedings of 2017 Institute for Operations Research and Management Science(INFORMS) Annual Meeting, Houston, TX

13. M. Ozen and A. Krishnamurthy, 2017, “Models to Quantify Material Convergence in Disaster Relief Operations,” Proceedings of 2017 Institute for Operations Research and Management Science(INFORMS) Annual Meeting, Houston, TX

14. A.K. Sinha and A. Krishnamurthy, 2016, “Stochastic Models for Strategic Sourcing,” Proceedings of 2016 Institute for Operations Research and Management Science(INFORMS) Annual Meeting, Nashville, TN

15. T. Martagan and A. Krishnamurthy, 2016, “Stochastic Models to Optimize Biomanufacturing Operations,” Proceedings of 2016 Institute for Operations Research and Management Science(INFORMS) Annual Meeting, Nashville, TN

16. M. Ozen and A. Krishnamurthy, 2015, “Performance Evaluation of Relief Centers using G‐network Models", Proceedings of 2015 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Philadelphia, PA.

17. S. Bhat and A. Krishnamurthy, 2015, “Resource Allocation Policies to provide Differentiated Service Levels to Customers”, Proceedings of 2015 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Philadelphia, PA.

18. T, Martagan and A. Krishnamurthy, 2015, “Stochastic Optimization of Protein Purification Operations”, Proceedings of 2015 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Philadelphia, PA.

19. A.K. Sinha and A. Krishnamurthy, 2015, “Stochastic Models for Strategic Sourcing in the Energy Industry,” Proceedings of 2015 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Philadelphia, PA.

20. M. Ozen and A. Krishnamurthy, 2015, “Performance Evaluation of Relief Centers at Disaster Sites”, Proceedings of the 2015 Industrial and Systems Engineering Research Conference, Nashville, TN.

21. T, Martagan and A. Krishnamurthy, 2015, “Stochastic Optimization of Protein Purification Operations”, Proceedings of the 2015 Industrial and Systems Engineering Research Conference, Nashville, TN.

22. S. Bhat and A. Krishnamurthy, 2015, “Resource Allocation Policies to provide Differentiated Service Levels to Customers”, Proceedings of 2015 Canadian Operations Research Society (CORS) Annual Meeting, Montreal, Canada.

23. M. Ozen and A. Krishnamurthy, 2014, “G‐network Models for Relief Centers at Disaster Sites", Proceedings of 2014 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, San Francisco, CA.

24. A. Sinha and A. Krishnamurthy, 2014, “Competition Risk in Sourcing Strategies for Assembled Products", Proceedings of 2014 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, San Francisco, CA.

25. T, Martagan and A. Krishnamurthy, 2014, “Optimal Purification Strategies Based on Quality‐Yield Tradeoffs in Biomanufacturing Operations", Proceedings of 2014 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, San Francisco, CA.

26. S. Bhat and A. Krishnamurthy, 2014, “Exploiting Structural Properties to Analyze High Dimensional Multi‐Product Manufacturing Systems", Proceedings of 2014 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, San Francisco, CA.

27. T. Foti, P. Leland, A Krishnamurthy, and T., Martagan, 2014, Decision Support Tools to Reduce Lead Times and Costs in Biomanufacturing, 2015 Bioscience Vision Summit, Madison, WI.

13

28. T. Martagan and A. Krishnamurthy, 2014, “Optimal Policies for Downstream Bio‐manufacturing Operations, “Proceedings of 2014 Production and Operations Management Conference, Atlanta, GA.

29. S. Bhat and A. Krishnamurthy, 2014, “Approximate Dynamic Programming Methods for Multi‐Product Manufacturing Systems,” Proceedings of 2014 Production and Operations Management Conference, Atlanta, GA

30. S. Bhat and A. Krishnamurthy, 2013, “Dynamic Resource Allocation for Manufacturing System with Multiple Products and Seasonal Demands", Proceedings of 2013 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Minneapolis, MN.

31. T. Martagan and A. Krishnamurthy, 2013, “Optimizing Downstream Bio‐manufacturing Operations under Quality Constraints and Batch Failures", Proceedings of 2013 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Minneapolis, MN.

32. A.K. Sinha and A. Krishnamurthy, 2013, “Optimal Production and Sub‐Contracting Policies in Assemble‐to‐Order Systems", Proceedings of 2013 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Minneapolis, MN.

33. M. Ozen and A. Krishnamurthy, 2013, “Effects of Relief Center Design and Routing Strategies on Aid Delivery Performance", Proceedings of 2013 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Minneapolis, MN.

34. D. Veeramani, A. Krishnamurthy, V. K. Dubey, and T. Martagan, 2013, “A Decision‐Making Framework for Automating Distribution Centers in a Retail Supply Chain, “Proceedings of the 9th IEEE International Conference on Automation Science and Engineering, Madison, WI.

35. T. Martagan, A. Krishnamurthy, 2012, “Optimum Harvesting Policies for Upstream Bio‐manufacturing Operations, Manufacturing and Service Operations Management Conference, New York, NY.

36. S. Bhat and A. Krishnamurthy, 2012, “Optimal Control Policies for Production Systems with Seasonal Demands", Proceedings of 2012 Institute for Operations Research and Management Science (INFORMS) Annual Meeting Phoenix, AZ.

37. T. Martagan. and A. Krishnamurthy, 2012, “Condition based Harvesting Policies for Bio‐manufacturing Operations", Proceedings of 2012 Institute for Operations Research and Management Science (INFORMS) Annual Meeting Phoenix, AZ.

38. S .Bhat and A. Krishnamurthy, 2012, “Optimal Capacity Control Policies for Production Systems with Periodic Demands", Extended abstract, MSOM Conference, New York City, NY.

39. A. Krishnamurthy, 2011, “Rapid Modeling Bridges Theory and Practice: Looking Back and Looking Forward,” 3rd Rapid Modeling Conference (Keynote Talk), Katholieke Universiteit Leuven, Leuven, Belgium.

40. A. Krishnamurthy, 2011, “Design Conceptualization of Warehouses: Unit Load Operations,” Material Handling Teaching Institute, Auburn University, AL.

41. A. Krishnamurthy, 2011, “Quick Response Manufacturing‐ Slash Lead Times for Competitive Agility,” Manufacturing Matters! Wisconsin Manufacturing Extension Partnership, Milwaukee, WI.

42. S. Bhat and A. Krishnamurthy, 2011, “Queuing Model for Inventory Control in a System with Periodic Demands,” Proceedings of 2011 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Charlotte, NC.

43. T. Martagan and A. Krishnamurthy, 2011, “Modeling and Design of Biopharmaceutical Production Systems,” Proceedings of 2011 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Charlotte, NC.

44. A. Krishnamurthy, D. Roy and S. Bhat, 2011, “Analysis of Alternative Layout Designs for Distribution of Bulk Relief Supplies,” Proceedings of 2011 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Charlotte, NC.

14

45. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2011, “Stochastic Models of AVSRS with Vertical Conveyors,” Proceedings of 2011 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Charlotte, NC.

46. T. Martagan and A. Krishnamurthy, 2011, “Performance Modeling of Biopharmaceutical Production Systems,” Proceedings of 2011 Institute for Operations Research and Management Science (INFORMS) Midwestern Conference, Ohio State University, Columbus, OH.

47. A. Krishnamurthy, D. Roy and S. Bhat, 2011, “Analysis of Alternate Layout Designs for Distribution of Bulk Relief Supplies,” Proceedings of 2011 Institute for Operations Research and Management Science (INFORMS) Midwestern Conference, Ohio State University, Columbus, OH.

48. S. Bhat and A. Krishnamurthy, 2011, “Queuing Model for Production‐Inventory Control in a System with Non‐Stationary Demands,” Proceedings of 2011 Institute for Operations Research and Management Science (INFORMS) Midwestern Conference, Ohio State University, Columbus, OH.

49. A. Hariharan and A. Krishnamurthy, 2011, “Batch Size Trade‐offs in the Manufacture of Chemical and Biological Products,” Proceedings of 2011 Institute for Operations Research and Management Science (INFORMS) Midwestern Conference, Ohio State University, Columbus, OH.

50. B. Ekren, S.S. Heragu, A. Krishnamurthy and C.J. Malmborg, 2010, “Matrix‐Geometric Method for Semi‐Open Queuing Network Model of an Automated Material Handling,” Proceedings of the 2010 Industrial Engineering Conference, Cancun, MX.

51. A. Krishnamurthy and D. Seethapathy, 2010, “Production Inventory Models for a Multi‐Product Batch Production System,” Proceedings of the 2010 Industrial Engineering Conference, Cancun, MX.

52. D. Ge and A. Krishnamurthy, 2010, “Pull Systems with Advance Demand Information: Effect of Information Quality,” Proceedings of 2010 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Austin, TX.

53. D. Roy and A. Krishnamurthy, 2010, “Analyzing Flexible Design Configurations in Autonomous Vehicles‐based Warehouses,” Proceedings of 2010 Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Austin, TX.

54. D. Ge, A. Krishnamurthy and O. Alagoz, 2010, “Integrating Advanced Demand Information in Kanban Controlled Systems,” Invited Talk, EURANDOM, The Netherlands.

55. A. Krishnamurthy, D. Roy, S.S. Heragu and C.J. Malmborg, 2009, “Vehicle Interference Effects in Warehousing Systems with Autonomous Vehicles,” Workshop on Stochastic models for warehousing systems, EURANDOM, The Netherlands.

56. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2009, “Vehicle Interference Effects in Autonomous Vehicles based Warehousing Systems,” Proceedings of 2009 Institute for Operations Research and Management Science (INFORMS), San Diego, CA.

57. A. Krishnamurthy, 2009, “Batching Policies in Semi‐Process Industries,” Proceedings of 2009 Institute for Operations Research and Management Science (INFORMS), San Diego, CA.

58. S.S. Heragu, X. Cai, A. Krishnamurthy and C.J. Malmborg, 2009, “Analytical Model for Autonomous Vehicle Storage/Retrieval Systems,” Proceedings of 2009 Institute for Operations Research and Management Science (INFORMS), San Diego, CA.

59. D. Ge and A. Krishnamurthy, 2009, “Integrating Advance Demand Information in Supply Chain Contracts,” Proceedings of 2009 Institute for Operations Research and Management Science (INFORMS), San Diego, CA.

60. D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg, 2009, “Effect of Cross‐aisle and Zoning on Performance of an Autonomous Vehicles‐based Storage and Retrieval System,” Proceedings of the Annual Conference of Production and Operations Management Society, Orlando, FL.

61. A. Krishnamurthy, J‐S. Pang, R. Ramakrishnan and J. Zhao, 2008, “Integrated Queuing and Gaming Analysis of Stochastic Assembly Systems,” Proceedings of the 2008 Industrial Engineering Conference, Vancouver, B.C.

15

62. D. Ge and A. Krishnamurthy, 2008, “Using Demand Information Aggregation to Improve Order Fulfillment in Supply Chains,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Washington (D.C.).

63. D. Roy and A. Krishnamurthy, 2008, “Performance Analysis of Alternate Designs for Autonomous Vehicle based Storage and Retrieval Systems,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Washington (D.C.).

64. A. Krishnamurthy, L. Zhang, C.J. Malmborg and S.S. Heragu, 2008, “Queuing Network Models for Estimating Cycle Times of Autonomous Vehicle based Storage and Retrieval Systems,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Washington (D.C.).

65. D. Ge, A. Krishnamurthy and O Alagoz, 2008, “Optimal Release Policies for Systems that Integrate Kanban Control with Advance Demand Information,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Washington (D.C.).

66. R. Ramakrishnan and A. Krishnamurthy, 2007, “Performance Evaluation of Multi‐Product Fabrication/Assembly Systems,” Proceedings of Eighteenth Annual Conference of Production and Operations Management Society, Dallas, TX (invited talk).

67. K. Satyam and A. Krishnamurthy, 2007, “Effect of Batch Sizes in Multi‐product CONWIP Systems,” Proceedings of Eighteenth Annual Conference of Production and Operations Management Society, Dallas, TX.

68. R. Ramakrishnan and A. Krishnamurthy, 2006, “Queuing Models for Multi‐Product Fabrication/Assembly Systems,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Pittsburgh, PA.

69. A. Krishnamurthy and K. Satyam, 2006, “Loop Length Trade‐Offs in Pull Systems with Product Variety,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Pittsburgh, PA.

70. K. Satyam, M. Kamath and A. Krishnamurthy, 2006, “Node Decomposition Based Approaches for Multi‐Class Closed Queuing Networks,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Pittsburgh, PA.

71. A. Krishnamurthy and R. Suri, 2006, “Quick Response Manufacturing and POLCA,” Invited Tutorial at the Third International Conference on Group Technology/Cellular Manufacturing, Groningen, The Netherlands (invited talk).

72. K. Satyam and A. Krishnamurthy, 2006, “Parametric Decomposition Based Approach for Performance Analysis of Multi‐Product Pull Systems with Batching,” Proceedings of the Third International Conference on Group Technology/Cellular Manufacturing, Groningen, The Netherlands (invited talk).

73. K. Satyam and A. Krishnamurthy, 2005, “Design and Performance Tradeoffs in Multi‐Product Pull Systems,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, San Francisco, CA (invited talk).

74. K. Satyam and A. Krishnamurthy, 2005, “Analytical Models for Optimal Loading of Multi‐Server Queues,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, San Francisco, CA.

75. R. Ramakrishnan and A. Krishnamurthy, 2005, “Queuing Models for Networks with Assembly Operations,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, San Francisco, CA.

76. R. Ramakrishnan and A. Krishnamurthy, 2005, “Two‐Moment Approximations for Performance Evaluation of Synchronization Stations,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, San Francisco, CA.

16

77. A. Krishnamurthy, A. Gosavi, and P.P Shah, 2005, “Supplier Selection and Sourcing Policies in Remanufacturing Supply Chains,” Proceedings of Sixteenth Annual Conference of Production and Operations Management Society, Chicago, IL (invited talk).

78. A. Krishnamurthy, J. Granger and S.M. Robinson, 2005, “Design Optimization of Logistics and Information Networks,” Paper 1349 at the First Annual Working Together: Conference on Public/Private Research & Development (R&D) Partnerships in Homeland Security, sponsored by the U.S. Department of Homeland Security, Science and Technology Directorate, Boston, MA.

79. K. Satyam and A. Krishnamurthy, 2004, “Production and Inventory Control Strategies for Multi‐Product systems with Shared Resources,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Denver, CO (invited talk).

80. R. Ramakrishnan and A. Krishnamurthy, 2004, “Impact of Component Heterogeneity on Kitting Process in Assembly Systems,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Denver, CO (invited talk).

81. A. Petrie and A. Krishnamurthy, 2004, “Analysis of General Closed Queuing Networks with Synchronization Stations and Population Constraints,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Denver, CO (invited talk).

82. M. Fukunari and A. Krishnamurthy, 2004, “Analytical Models for Finite Buffer Tandem Lines with Dynamic Servers,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Denver, CO.

83. J.M. Tien, A. Krishnamurthy and A. Yasar, 2004, “Towards Real‐Time Customized Management of Supply and Demand Chains,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Denver, CO (invited talk).

84. A. Krishnamurthy and R. Suri, 2003, “Analytical Performance Models of Multi‐stage Kanban Systems,” Proceedings of Production and Operations Management Conference, 2003, Savannah, GA (invited talk).

85. R. Suri and A. Krishnamurthy, 2003, “New Results on POLCA: A Card Based Control System for Custom Products,” Proceedings of Production and Operations Management Conference, Savannah, GA.

86. R. Suri and A. Krishnamurthy, 2003, “Analytical Models of Multi‐stage Kanban Systems Using New Approximations for Fork/Join Stations,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Atlanta GA.

87. A. Krishnamurthy and R. Suri, 2003, “Approximations for the Variability Parameter of the Departure Process from a Fork/Join Station,” Proceedings of Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Atlanta GA.

88. R. Suri and A. Krishnamurthy, 2003, “POLCA‐A Card‐Based Material Control System for Cellular Manufacturing of High Variety and Custom Products,” 2003 Group Technology/Cellular Manufacturing Research Conference, Columbus, OH.

89. A. Krishnamurthy, R. Suri and M. Vernon, 2001, “A Parametric Decomposition Method for Analysis of Closed Queuing Networks with Fork/Join Stations,” Proceedings of the Industrial Engineering Research Conference, May 2001, Dallas, TX. (Extended Abstract)

Technical Reports and Other Publications 1. S.S. Heragu, X. Cai, A. Krishnamurthy and C. J. Malmborg, 2008, “A New Material Handling

Technology for Warehouses,” IE Solutions Magazine, December Edition. 2. A. Petrie and A. Krishnamurthy, 2005, “Analysis of General Closed Queuing Networks with

Synchronization Stations and Population Constraints,” Technical Report, Rensselaer Polytechnic Institute, Troy, NY.

17

3. M. Fukunari and A. Krishnamurthy, 2005, “Analytical Models for Finite Buffer Tandem Lines with Dynamic Servers,” Technical Report, Rensselaer Polytechnic Institute, Troy, NY.

4. R. Suri and A. Krishnamurthy, 2003, “Planning and Implementing POLCA: A Card‐based Control System for High Variety or Custom Engineered Products,” Technical Report, Center for Quick Response Manufacturing, University of Wisconsin‐Madison, Madison, WI.

Edited Books (Conference Proceedings) 1. A. Krishnamurthy (Editor), 2017, Proceedings of Fifteenth International Conference on Quick

Response Manufacturing (QRM 2017), Madison, WI, 2017, University of Wisconsin‐Madison, USA.

2. A. Krishnamurthy (Editor), 2015, Proceedings of Fourteenth International Conference on Quick

Response Manufacturing (QRM 2015), Madison, WI, 2015, University of Wisconsin‐Madison, USA.

3. A. Krishnamurthy (Editor), 2013, Proceedings of Twelfth International Conference on Quick Response

Manufacturing (QRM 2013), Madison, WI, 2013, University of Wisconsin‐Madison, USA.

4. A. Krishnamurthy (Editor), 2011, Proceedings of Tenth International Conference on Quick Response


5. A. Krishnamurthy (Editor), 2009, Proceedings of Ninth International Conference on Quick Response


6. A. Krishnamurthy (Editor), 2008, Proceedings of Eighth International Conference on Quick Response


TEACHING University of Wisconsin‐Madison Undergraduate Courses

ISyE 415: Introduction to Manufacturing Systems Design and Analysis: Fall 2008‐2018 Graduate Courses

ISyE 641/ME 641: Design and Analysis of Manufacturing Systems, Spring 2009‐2018

ISyE 691: Supply Chain and Logistics: Design, Operation and Coordination, Fall 2012‐2014

ISyE 645: Engineering Models of Supply Chains, Fall 2015‐2018 Teaching Evaluations at University of Wisconsin‐Madison (Instructor rating is out of 5)

Course AY 2008‐2009

AY 2009‐2010

AY 2010‐2011

AY 2011‐2012

AY 2012‐2013

AY 2013‐2014

AY 2014‐2015

AY 2015‐2016

AY 2016‐2017

AY 2017‐2018

AY 2018‐2019

ISyE 415 3.34 4.40 4.52 4.08 4.53 4.80 4.91 4.82 4.33 4.39 3.91

ISyE 641 4.80 4.88 4.33 4.73 4.68 4.58 5.00 4.60 4.79 5.00 ‐

ISyE 691/645

4.57 4.90 5.00 4.88 4.87 4.81 5.00

Rensselaer Polytechnic Institute Undergraduate Courses

ENGR 4700: Introduction to Manufacturing Planning, Fall 2002‐2006

DSES 2210: Production Operations Management and Cost Accounting, Fall 2003‐2006

18

DSES 4960: Design of Manufacturing Systems and Supply Chains, Spring 2007

DSES 4140: Statistical Analysis, Fall 2007 Graduate Courses

ECSE/DSES 6820: Queuing Systems and Applications, Spring 2003‐2007

DSES 6962: Design of Manufacturing Systems and Supply Chains, Spring 2004‐2006

DSES 6600: Design of Manufacturing Systems and Supply Chains, Spring 2007 EXECUTIVE EDUCATION Teaching Evaluations at University of Wisconsin‐Madison (Instructor rating is out of 5)

Topic Summary 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018

Competing Through Quick Response

4.6 4.6 4.7 4.7 4.7 4.6 4.7 4.8 4.8 4.8 4.9

Implementing Shop Floor Cells

‐ ‐ ‐ 4.2 4.1 4.5 4.6 4.6 4.8 4.8 4.9

Improving Office Operations

‐ ‐ ‐ ‐ 4.2 4.7 4.7 4.6 4.8 4.7 4.8

Production Planning ‐Push, Pull, POLCA

4.7 4.9 4.8 4.8 4.7 4.8 4.9 4.7 4.8 4.8 4.7

Lead Time Metrics ‐ MCT

4.3 4.3 4.4 4.1 4.5 4.6 4.4 4.5 4.5 4.4 4.6

Total attendees/year

190 210 220 250 280 290 305 320 315 320 310

TEACHING INTERESTS

Operations Research, Stochastic Optimization, Queuing Theory, Simulation

Supply Chain Management, Manufacturing Systems. DOCTORAL THESIS SUPERVISION DOCTORAL THESIS ‐ SOLE SUPERVISION 1. Ravi Suman: Thesis Title: Optimizing Flow in a High‐mix Complex Manufacturing Environment, Status

of Student: DQE Exam ‐ Sep ‐2016; Prelim Exam – Fall 2018 2. Yasemin Limon: Thesis Title: Optimization Challenges in Biomanufacturing, Status of Student: DQE

Exam ‐ Sep ‐2016; Prelim Exam – Fall 2018 3. Merve Ozen: Thesis Title: Models to Improve Efficiency of Disaster Relief Operations; Status of Student:

Prelim Exam ‐ Aug ‐2017, Graduation‐Spring 2018. 4. Ashesh Sinha: Thesis Title: Strategic Sourcing and Supply Chain Leverage in Energy Equipment

Manufacturing; Status of Student: Passed DQE, Prelim Exam – Oct ‐2015 Graduation‐Aug 2016 (Employment: Assistant Professor, Kansas State University)

5. Tugce Martagan: Thesis Title: Stochastic Models to Optimize Biomanufacturing Operations; Status of Student: Passed Prelim, Graduated‐Aug 2015 (Employment: Assistant Professor, TU/e Eindhoven University of Technology, Eindhoven, The Netherlands)

19

6. Sanket Bhat: Thesis Title: Dynamic Capacity and Inventory Policies for Manufacturing Systems with Seasonal Demands; Status of student: Graduated‐Aug 2014. (Employment: Post‐Doctoral Research Associate, McGill University, Montreal)

7. Debjit Roy: Thesis Title: Design and Analysis of Warehouses with Autonomous Vehicles; Status of student: Graduated‐May 2011. (Employment: Associate Professor at Indian Institute of Management, Ahmedabad)

8. Deng Ge: Thesis Title: Integration of Advance Demand Information with Pull‐Type Production Control Systems; Status of student: Graduated‐June 2011. (Employment: Senior Consultant at Gap Inc.)

9. Li Zhang: Thesis Title: Conceptualization Models for Unit Load Warehouse Design based on Autonomous Vehicle Technology; Status of student: Graduation‐January 2008. (Employment: Quantitative Analysis Manager, VP at RBS Citizens Financial Group)

10. Ram Ramakrishnan: Thesis Title: Queuing Models for Performance Evaluation and Optimal Design of Fabrication/Assembly Systems; Status of student: Graduation‐May 2007. (Employment: Business Analytics Consultant, ZS Associates)

11. Kumar Satyam: Thesis Title: Analytical Models for Multi‐Product Systems with Pull Material Control Strategies; Status of student: Graduation‐May 2007. (Employment: Manager Analytics, Pricewaterhouse Coopers)

DOCTORAL THESIS ‐ JOINT SUPERVISION 1. Nico Goossens: Thesis Title: Blocking Systems with Zero Buffers: A Kanban Like Approach; Advisors:

Prof. N. Vandaele (Faculty of Applied Economics, University of Antwerp, 50%) and Prof Ananth Krishnamurthy (50%); Status of student: Graduation ‐ May 2006. (Employment: Staff, UZ Brussels)

2. Ali Yasar: Thesis Title: Real Time and Simultaneous Management of Supply and Demand Chains; Advisors: Prof. James M Tien (Dept. of DSES, RPI, 50%) and Prof. Ananth Krishnamurthy (50%); Status of student: Graduation‐May 2005. (Employment: Credit Strategy Analytics Lead, Barclays Bank)

3. Omar Al‐Araidah: Thesis Title: Simultaneous Facility Layout and Material Handling Systems Design; Advisors: Prof. Charles Malmborg (Dept. of DSES, RPI, 50%) and Prof. Ananth Krishnamurthy (50%); Status of student: Graduation‐May 2005. (Employment: Professor, Jordan University of Science and Technology)

4. Po‐Hsun Kuo: Thesis Title: Modeling and Analysis of Autonomous Vehicle Storage and Retrieval Systems; Advisors: Prof. Ananth Krishnamurthy (50%) and Prof. Charles Malmborg (Dept. of DSES, RPI, 50%); Status of student: Graduation‐May 2005. (Employment: Assistant Professor, National Taiwan University of Science and Technology)

MASTER’S THESIS – SOLE ADVISOR 1. Aswini Hariharan: Thesis Title: Production Control in Semi‐Process Industries; Advisor: Prof. Ananth

Krishnamurthy; Status of student: Graduation‐May 2011. (Employment: Manufacturing Engineer, Schlumberger)

2. Divya Seethapathy: Thesis Title: Production Inventory Control Policies in a Batch Production Environment; Advisor: Prof. Ananth Krishnamurthy; Status of student: Graduation‐Dec 2010. (Employment: Assistant Manager, Larsen & Toubro Limited)

3. David Claudio: Thesis Title: A Simulation Based Analysis of Pull Systems with Advance Demand Information; Advisor: Prof. Ananth Krishnamurthy; Status of student: Graduation‐May 2006. (Employment: Assistant Professor, Montana State University)

DOCTORAL THESIS COMMITTEE MEMBER 1. Yuhang Liu: Major Advisor‐Prof Shiyu Zhou, Industrial and Systems Engineering (UW‐Madison);

Status of Student: Graduation 2017

20

2. Amonsiri Vilasdaechanont: Major Advisor‐Prof Raj Veeramani, Industrial and Systems Engineering (UW‐Madison); Status of Student: Graduation 2017

3. Xiang Zhong: Major Advisor‐Prof Jingshan Li, Industrial and Systems Engineering (UW‐Madison); Status of Student: Graduation 2016

4. Vivek Dubey: Major Advisor‐Prof Raj Veeramani, Industrial and Systems Engineering (UW‐Madison); Status of Student: Graduation 2015

5. Jianguo Wu: Major Advisor‐Prof Shiyu Zhou, Industrial and Systems Engineering (UW‐Madison); Status of Student: Graduation 2015

6. Debasis Das: Major Advisor‐Prof Shiyu Zhou, Industrial and Systems Engineering (UW‐Madison); Status of Student: Graduation 2015

7. Feng Ju: Major Advisor: Prof. Jingshan Li, Industrial and Systems Engineering (UW‐Madison); Status of Student: Graduation 2015

8. Junbo Son: Major Advisor‐Prof Shiyu Zhou, Industrial and Systems Engineering (UW‐Madison); Status of Student: Graduation 2014

9. Yuan: Major Advisor‐Prof Shiyu Zhou, Industrial and Systems Engineering (UW‐Madison); Status of Student: Graduation‐ May 2014.

10. Kaushik Narasimhan: Major Advisor‐Prof Christos Maravelias, Chemical and Biological Engineering (UW‐Madison); Status of Student: Graduation 2012

11. Qiang Zhou: Major Advisor‐Prof Shiyu Zhou, Industrial and Systems Engineering (UW‐Madison); Status of Student: Graduation 2011.

12. Arul Sundaramoorthy: Major Advisor‐Prof Christos Maravelias, Chemical and Biological Engineering (UW‐Madison); Status of Student: Graduation 2010.

13. Nan Chen: Major Advisor: Prof Shiyu Zhou, Industrial and Systems Engineering (UW‐Madison); Status of Student: Graduation 2010.

14. Aaron Armstrong: Major Advisor: Prof Leyuan Shi, Industrial and Systems Engineering (UW‐Madison); Status of Student: Graduation 2010.

15. Chongsun Oh: Major Advisor: Prof Raj Veeramani, Industrial and Systems Engineering (UW‐Madison); Status of Student: Graduation 2009.

16. George Kola: Major Advisor: Prof Mary Vernon, Computer Science (UW‐Madison); Status of Student: Graduation 2008.

17. David Nowicki: Major Advisor‐ Prof Harry Steudel, Industrial and Systems Engineering (UW‐Madison); Status of Student: Graduation 2008.

18. Lili Du: Thesis Title: Addressing Fundamental Problems in Vehicular Ad Hoc Networks: Connectivity, Interference, and online Routing Algorithms; Major Advisor: Prof. Satish Ukkusuri (Dept. of DSES, RPI); Status of student: Graduation 2008.

19. Jing Gong: Thesis Title: Restoration of Services Problems; Major Advisor: Prof. William Wallace (Dept. of DSES, RPI); Status of student: Graduation 2007.

20. Michael Silas: Thesis Title: A Simulation‐Optimization Formulation for the Design of Off‐Peak Deliveries; Major Advisor: Prof. Jose‐Holguin Veras (Dept. of CEE, RPI); Status of student: Graduation 2007.

21. Anuj Goel: Thesis Title: A New Approach for Electronic Systems Reliability Assessment; Major Advisor: Prof. Daniel Berg and Robert Graves (Dept. of DSES, RPI); Status of student: Graduation 2007.

22. Sarah Riddell: Thesis Title: Manufacturing of Membrane Electrode Assemblies: Optimization of Cost, Production and Plant Layout; Major Advisor: Prof. Charles Malmborg (Dept. of DSES, RPI); Status of student: Graduation 2007.

23. Jose Celaya: Thesis Title: Modeling, Analysis and Design Methods for Multi‐agent Systems; Major Advisor: Prof. Alan Desrochers (Dept. of ECSE, RPI)and Prof. Robert Graves (Dept. of DSES, RPI); Status of student: Graduation 2007.

21

24. Fu Yan: Thesis Title: Two‐Stage Nash Equilibrium; Major Advisor: Prof. Jong‐Shi Pang (Dept. of Mathematical Sciences, RPI); Status of student: Graduation 2007.

25. Auk Brian Kim: Thesis Title: Design of Service Systems; Major Advisor: Prof. Daniel Berg (Dept. of DSES, RPI); Status of student: Graduation 2007.

26. Krishna Kumar Ramachandran: Thesis Title: An Analytical Study of Peer–to‐Peer Networks; Major Advisor: Prof. Biplab Sikdar (Dept. of ECSE, RPI); Status of student: Graduation 2007.

27. Neeraj Jaggi: Thesis Title: Dynamic Node Activation Policies in Networks of Rechargeable Sensors; Major Advisor: Prof. Koushik Kar (Dept. of ECSE, RPI); Status of student: Graduation 2007.

28. Jing Jia: Thesis Title: Solving Semi‐Open Queuing Networks; Major Advisors: Prof. Sunderesh Heragu (Dept. of DSES, RPI); Status of student: Graduation 2005.

29. Miki Fukunari: Analytical Foundations for Autonomous Vehicle Storage and Retrieval Systems using Load Transfer Station Based Dwell Point Strategies; Major Advisor: Prof. Charles Malmborg (Dept. of DSES, RPI); Status of student: Graduation 2005

30. Sam Xue: Thesis Title: Performance Modeling of Dynamic Network‐based Decision Systems; Major Advisors: Prof Alan Descrochers (Dept. of ECSE, RPI) Prof. Robert Graves and Prof. Sunderesh Heragu (Dept. of DSES, RPI); Status of student: Graduation 2005.

31. Feng Xue: Thesis Title: Multi‐objective Differential Evolution: Theory and Applications; Major Advisors: Prof Alan Descrochers (Dept. of ECSE, RPI) Prof. Robert Graves and Prof Sunderesh Heragu (Dept. of DSES, RPI); Status of student: Graduation 2004.

32. Thanakorn Naenna: Thesis Title: Data Mining Applications for Self‐Organizing Maps (Dept. of Engineering Science); Major Advisor: Prof. Mark Embrechts (Dept. of DSES, RPI); Status of student: Graduation 2003.

MASTER’S RESEARCH PROJECTS – SOLE ADVISOR Projects carried out at the following companies at University of Wisconsin‐Madison (2011‐2017)

Year Companies sponsoring research projects

2018 CL&D Graphics, Bruno Indep. Living Aids, Dental Crafters, Hennig, Dorner Corp. Cottrell, Mitsubishi Heavy Industries, Promega Corp, Lands End Outfitters, Wacker Neuson, Weiss Technik North America, Bothe Industries, National Oilwell Varco

2017 CL&D Graphics, Bruno Indep. Living Aids, John Crane, Woodway Products, Specialty Screw Corp., Dental Crafters, Hennig, Dorner Corp. Cottrell, Mitsubishi Heavy Industries, Promega Corp., Western States Envelopes and Label, National Oilwell Varco

2016 John Deere, Promega Corp, Wacker Neuson Corp., Electronic Theatre Controls, Maya Romanoff, Banner Corp., Dental Crafters, S&C Electric, Bruno Indep. Living Aids, CL&D Graphics, National Oilwell Varco, ALCOA

2015 Banner Corp., Dental Crafters, Driv‐Lok, Electronic Theatre Controls, John Crane, John Deere, KSM Industries, Trek Bicycle, Western States Envelopes and Label, Fiskars, Alexandria Industries, Spee Dee Packaging Machinery, National Oilwell Varco, ALCOA

2014 Aztalan Engineering, Banner Corp., Cottrell Inc., Dental Crafters, Driv‐Lok, Electronic Theatre Controls, Federal Foam technologies, Fiskars, John Crane, John Deere, McFarlane Manufacturing, Trek Bicycle, National Oilwell Varco

2013 Bermo, Trystar Inc., Trinity Shoring, John Deere, Midwest Prototyping, Eirich Machines, Electronic Theatre Controls, National Oilwell Varco, Harley Davidson

2012 Amalga Composites, Weasler Engineering, John Deere, Phoenix Products, Nicolet Plastics, Freedman Seating, RenewAire, Dental Crafters, Spee Dee Packaging Machinery, National Oilwell Varco

22

2011 Rogan Corporation, Freedman Seating, Nicolet Plastics, ACS, Harken Inc., Andersen Corporation, Electronic Theatre Controls, Super Steel, John Deere, Wenger Corporation, National Oilwell Varco

RESEARCH GRANTS AND CONTRACTS PROPOSALS APPROVED AND FUNDED Title: Supply Chain Strategies for Complex Custom Engineered Products Investigator: Ananth Krishnamurthy (PI), University of Wisconsin‐Madison, WI (PI) Co‐investigators: Andrew Johnson (Texas A&M), Robert Voigt (Penn State) Sponsoring Agency and Amount: National Oilwell Varco, Houston, TX; $1,200,000 Duration: Aug 2016‐Aug 2020 Title: Optimizing Flow in a High‐mix Complex Manufacturing Environments Investigator: Ananth Krishnamurthy (PI), University of Wisconsin‐Madison, WI (PI) Sponsoring Agency and Amount: ALCOA, IA; $450,000 Duration: Aug 2015‐Dec 2016 Title: Being Responsive in a Global Supply Chain of Complex Custom Engineered Products Investigator: Ananth Krishnamurthy (PI), University of Wisconsin‐Madison, WI (PI) Co‐investigators: Andrew Johnson (Texas A&M), Robert Voigt (Penn State) Sponsoring Agency and Amount: National Oilwell Varco, Houston, TX; $300,000 Duration: Aug 2015‐Aug 2016 Title: Control and Optimization of Bio‐manufacturing Systems Investigator: Ananth Krishnamurthy (PI), University of Wisconsin‐Madison, WI (PI) Co‐investigators: Christo Maravelias (UW‐Madison), Derek Hei (UW‐Madison) Sponsoring Agency and Amount: National Science Foundation, CMMI‐ Manufacturing Enterprise Systems); $325,000 Duration: Sep 2013‐Aug 2017 Title: Being Responsive in a Complex Custom Engineered Manufacturing Environment: Strategies, Methods and Tools Investigator: Ananth Krishnamurthy (PI), University of Wisconsin‐Madison, WI (PI) Co‐investigators: Andrew Johnson (Texas A&M), Robert Voigt (Penn State) Sponsoring Agency and Amount: National Oilwell Varco, Houston, TX; $1,200,000 Duration: Sep 2011‐Aug 2016 Title: Research Collaborative on Manufacturing Systems Engineering Investigator: Ananth Krishnamurthy (PI), University of Wisconsin‐Madison, Madison, WI Sponsoring Agency and Amount: Pohang University of Science and Technology, South Korea; $1,037,000 Duration: Dec 2011‐May 2015 Title: Collaborative Proposal: EArly‐concept Grants for Exploratory Research (EAGER): Design Principles for Warehouses with Autonomous Vehicles (WAVE)

23

Investigators: Ananth Krishnamurthy (PI), University of Wisconsin‐Madison, Madison, WI and Sunderesh S. Heragu (co‐PI), University of Louisville, KY Sponsoring Agency and Amount: National Science Foundation, (CMMI‐Manufacturing Enterprise Systems); $260,000 Duration: Jan 2009‐Dec 2014 Title: i‐PICS: Integration of Advance Demand Information with Pull‐type Production Control Systems Investigators: Ananth Krishnamurthy (PI), University of Wisconsin‐Madison, Madison, WI. Sponsoring Agency and Amount: National Science Foundation, (CMMI‐Manufacturing Enterprise Systems); $238,003 Duration: Jan 2007‐Dec 2013 Title: Optimization and Automation of Hy‐Vee’s Distribution Operations Investigator: Raj Veeramani (PI) and Ananth Krishnamurthy (co‐PI), University of Wisconsin‐Madison, Madison, WI Sponsoring Agency and Amount: Hy‐Vee, Inc.; $220,481 Duration: Sep 2010‐Dec 2011 Title: Contending with Materiel Convergence: Optimal Control, Coordination and Delivery of Critical Supplies to the Site of an Extreme Event Investigators: Jose Holguin‐Veras (PI), Department of Civil and Environmental Engineering Systems, Rensselaer Polytechnic Institute, Troy, NY; Co‐PIs: Satish Ukkusuri, Department of Civil and Environmental Engineering Systems, Rensselaer Polytechnic Institute; Wayne Bequette, Department of Chemical and Biological Engineering, Rensselaer Polytechnic Institute; Ananth Krishnamurthy, University of Wisconsin‐Madison, Madison, WI; Didier Valdes, Department of Civil Engineering, University of Puerto Rico,. Tricia Wachtendorf, Department of Sociology and Criminal Justice, University of Delaware, Rodrigo Garrido (Department of Transportation Engineering, Pontificia Universidad Catolica de Chile, University of Chile; Consultant: Joseph Scanlon. Sponsoring Agency and Amount: National Science Foundation (HSD); $ 749,298 Duration: Jan 2007‐Jun 2011 Title: IREE: International Efforts with European University and Industries Towards Conceptualization Tools for Warehouse Design (NSF supplement to ongoing grant titled Conceptualization Tools for Unit Load Warehouse Design Based on Autonomous Vehicle Technology) Investigators: Ananth Krishnamurthy (PI), University of Wisconsin‐Madison, Madison, WI, Co‐PIs: Charles Malmborg, Department of Decision Sciences and Engineering Systems, Rensselaer Polytechnic Institute, Troy, NY; Sunderesh Heragu, Department of Industrial Engineering, University of Louisville, Louisville, KY. Sponsoring Agency and Amount: National Science Foundation, (CMMI‐Manufacturing Enterprise Systems); $40,350 Duration: Dec 2006‐Dec 2007 Title: Conceptualization Tools for Unit Load Warehouse Design Based on Autonomous Vehicle Technology Investigators: Ananth Krishnamurthy (PI), University of Wisconsin‐Madison, Madison, WI, Co‐PIs: Charles Malmborg, Department of Decision Sciences and Engineering Systems, Rensselaer Polytechnic Institute, Troy, NY; Sunderesh Heragu, Department of Industrial Engineering, University of Louisville, Louisville, KY. Sponsoring Agency and Amount: National Science Foundation, (CMMI‐Manufacturing Enterprise Systems); $300,000

24

Duration: Aug 2005‐Dec 2009 Title: Queuing Models of Hybrid Strategies for Manufacturing Systems with High Product Variety Investigators: Ananth Krishnamurthy (PI), University of Wisconsin‐Madison, Madison, WI. Sponsoring Agency and Amount: ALCOA‐Davenport, IA; $190,000 Duration: Aug 2004‐Aug 2008 Title: Adaptive Environmental Monitoring under Spatio‐temporal Correlations using Rechargeable Sensor Systems Investigators: Ananth Krishnamurthy (PI), Department of Decision Sciences and Engineering Systems, Rensselaer Polytechnic Institute (Co‐PIs): Koushik Kar, Department of Electrical, Computer and Systems Engineering, Rensselaer Polytechnic Institute, Sandra Nierzwicki‐Bauer, Director of DFWI & Department of Biology, Rensselaer Polytechnic Institute, Troy, NY Sponsoring Agency and Amount: Rensselaer Polytechnic Institute (Seed Grant Program of the Office of Research); $30,000 Duration: Feb 2006‐Aug 2007 Center for Quick Response Manufacturing, University of Wisconsin‐Madison: Industry contributions and gifts for research and services Investigator: Ananth Krishnamurthy (PI), University of Wisconsin‐Madison, Madison, WI.

2018: $500,000 for 2018. (55‐member companies)










2008: $350,000 for 2008. (52‐member companies) These funds and activities support the QRM Center staff as well as several graduate students pursuing research under my supervision. EDITORSHIP OF JOURNALS, REVIEWS OF MANUSCRIPTS, RESEARCH PROPOSALS 1. Editorship: Associate Editor, Journal of Flexible Services and Manufacturing (2007‐2009); Associate

Editor (Decision Sciences), Journal of Applied Mathematical Modeling, Elsevier (2006‐2012) 2. Proposal referee for NSF‐Division of Design, Manufacturing and Industrial Innovation (2004, 2005),

Division of Civil, Mechanical and Manufacturing and Innovation (2006, 2008, 2009, 2011, 2012, 2013, 2015, 2017).

3. Paper referee for the following journals: Operations Research, IIE Transactions, Transportation Science, Annals of Operations Research, IEEE Transactions on Parallel and Distributed Systems, IEEE Transactions on Systems, Man and Cybernetics, IEEE Transactions on Robotics and Automatic Control, IEEE Transactions on Automation Science and Engineering, OR Spektrum, Naval Research Logistics Quarterly, Asia Pacific Journal of Operations Research, International Journal of Production Research.

25

4. Paper referee for the following conference proceedings: Industrial Engineering Research Conferences, Winter Simulation Conference.

SERVICE SERVICE TO UNIVERSITY AND DEPARTMENT University of Wisconsin‐Madison

Faculty Advisor, APM Student Organization, Dept of ISyE, UW‐Madison (2017)

Faculty Advisor, IISE Student Organization, Dept of ISyE, UW‐Madison (2016)

Member of Mentor committee for Prof. X. Wang, Dept of ISyE, UW‐Madison (2016‐2019)

Member of Mentor committee for Prof. L. Albert, Dept of ISyE, UW‐Madison (2016‐2019)

Member of ISyE Faculty Hiring Committee, Dept of ISyE, UW‐Madison (2017)

Member, College of Engineering MEng Oversight Committee (2015‐2016)

Member of Academic Advisory Board for the Joyce Erdman Center for Manufacturing and Technology Management (2008‐2019)

Member, College of Engineering Academic Planning and Curriculum Regulation Council (APCRC), 2009‐2017.

Director of the MSE Program (Jan 2008‐Apr 2012) and Member of the MSE Program Executive Committee, UW‐Madison (2008‐2019)

Director of the Center for Quick Response Manufacturing and Member of the Executive Committee of the Center for Quick Response Manufacturing, UW‐Madison (2008‐2019)

Coordinator of Student and Alumni Affairs Cluster, Dept of ISyE, UW‐Madison (2010‐2019)

Member of Student and Alumni Affairs Cluster, Dept of ISyE, UW‐Madison (2008‐2019)

Member of Academic Affairs Cluster, Dept of ISyE, UW‐Madison (2008‐2017)

Member of Mentor committee for Prof. O. Alagoz, Dept of ISyE, UW‐Madison (2010)

Member of Promotion and Tenure committee for Prof. O. Alagoz, Dept of ISyE, UW‐Madison (2009)

Member of Promotion and Tenure committee for Prof. J. Li, Dept of ISyE, UW‐Madison (2009)

Member of ISyE Faculty Hiring Committee, Dept of ISyE, UW‐Madison (2009) Rensselaer Polytechnic Institute

Member, Department Chair Search Committee (2005‐2006)

Faculty Coordinator, Dept. of Decision Sciences and Engineering Systems Seminar Series (2003‐2005)

Member, Undergraduate Advisory Committee (2003‐2007)

Advisor to Undergraduate class of 2007 (2003‐2007) SERVICE TO PROFESSIONAL SOCIETIES

Membership with Professional Societies

Institute for Operations Research and Management Sciences (INFORMS): Member (1998‐2019)

Institute of Electrical and Electronics Engineers (IEEE): Member (2009‐2019)

Society of Manufacturing Engineers (SME): Member (1998‐2019)

Institute of Industrial Engineers (IIE): Member (1998‐2019)

Production and Operations Management Society (POMS): Member (2001‐2019)

American Production Inventory Control Society (APICS): Member (2003‐2019)

American Society for Engineering Education (ASEE): Member (2003‐2004, 2006)

26

Professional Service

Conference Chair, QRM 2017: International Conference on Quick Response Manufacturing, Madison, WI

Academic Member (Elected): College Industry Council on Material Handling Education (CICMHE) 2012‐2015.

Program Chair, 2015 Material Handling Teachers Institute and Future Faculty Symposium, Madison, WI

Cluster Chair on Stochastic Models and their Applications at Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Philadelphia, PA, 2015.


President, TSL SIG, Institute for Operations Research and Management Science (INFORMS) 2012‐2014.

Organized three sessions at Institute for Operations Research and Management Science (INFORMS) Annual Meeting, San Francisco, CA, 2014.

Program Committee, QRM 2014: International Conference on Quick Response Manufacturing, Arnhem, The Netherlands

Conference Program Chair, Industrial and Systems Engineering Research Conference, San Juan, PR, 2013.


Track Chair, 9th IEEE Conference on Automation Science and Engineering, Madison, WI, 2013.

Organized four sessions at Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Minneapolis, MN, 2013.

Organized five sessions at Industrial Engineering Conference, Orlando, FL, 2012.

Organized three sessions at Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Phoenix, AZ, 2012.

Program Committee, QRM 2012: International Conference on Quick Response Manufacturing, Arnhem, The Netherlands

Organized sessions at Industrial Engineering Conference, Reno, NV, 2011.

Organized sessions at Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Charlotte, NC, 2011.


Member, Conference Organization Committee and Track Coordinator (Manufacturing and Supply Chain) for the 2010 IEEE Conference on Automation Science and Engineering, Toronto, Canada

Organized three sessions at Industrial Engineering Conference, Cancun, MX, 2010.

Organized three sessions at Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Austin, TX, 2010.

Vice President, TSL SIG, Institute for Operations Research and Management Science (INFORMS) 2009‐2011.

Member, Conference Organization Committee for the 2009 International Conference on Value Chain Sustainability (ICOVACS), Louisville, September 2009.

Organized two sessions at Industrial Engineering Conference, Miami, FL, 2009.

Organized two sessions at Institute for Operations Research and Management Science (INFORMS) Annual Meeting, San Diego, CA, 2009.

Conference Chair, QRM 2009: International Conference on Quick Response Manufacturing,

27

Madison, WI

Cluster Chair for cluster on Lean Manufacturing at Institute for Industrial Engineers Research Conference, 2007, Nashville, TN.


Session Chair on “Production Inventory Models” at Eighteenth Annual Conference of Production and Operations Management Conference, 2007, Dallas, TX.

Program Committee Member of Third International Conference on Group Technology/ Cellular Manufacturing, Groningen, The Netherlands, 2006.

Session Chair on “Production Planning” at Institute for Industrial Engineers Research Conference, 2006, Orlando, FL.

Session Chair on “Stochastic Models for Manufacturing Systems and Supply Chains” at Institute for Operations Research and Management Science (INFORMS) Annual Meeting, 2005, San Francisco, CA.

Invited Cluster Chair for cluster on “Stochastic Models for Manufacturing Systems” at Institute for Operations Research and Management Science (INFORMS) Annual Meeting, 2004, Denver, CO.

Track Chair for track on “Mass Customization” at Production and Operations Management Conference, 2003, Savannah, GA.

Session Chair at Institute for Industrial Engineers Research Conference, 2000, Cleveland, OH.

Program Committee Member of QRM 2001: International Conference on Quick Response Manufacturing, Madison, WI.

President, Student Chapter of SME (S133), University of Wisconsin‐Madison (1999). INDUSTRY OUTREACH ACTIVITIES

Outreach Activities at University of Wisconsin‐Madison (2008‐2019)

As the Director of the Center for Quick Response Manufacturing, I have worked with over 250 companies advancing the state of the art of research and practice of lead time reduction. I have developed and refined principles that have broad application in a variety of industries including: heavy manufacturing, light manufacturing, sophisticated electronics, wooden furniture, fabricated plastic and metal parts, ships, hand‐held tools, specialized lighting fixtures, printing, and biotechnology. For the last ten years (2008‐2017) the QRM Center has hosted roughly 12 events each year, covering a variety of research and implementation topics related to manufacturing. These events draw over 700 executives from industries across the US and overseas each year.

Outreach Activities at Rensselaer Polytechnic Institute (2002‐2008)

QUESTAR III and CIPCE: Collaboration with High school teachers and students to investigate outsourcing issues in manufacturing and develop curriculum models that will increase interest in manufacturing and engineering among high school students.

CEG: Collaboration with Center for Economic Growth, CEG (a New York and NIST supported organization) to investigate challenges and needs of manufacturing industries in Capital District.

INDUSTRY COLLABORATIONS‐QRM CENTER

Expanding the Industry Impact of the QRM Center: I serve as the Director of the Center for Quick Response Manufacturing (2008 to 2019). Since I took over its leadership, I have made conscious efforts to grow the portfolio of research activities to incudes concepts related to global supply

28

chains, warehousing, and distribution. As a result, the Center has grown in terms of funding as well as industry partners (from 32 in 2007 to 60 in 2019) and impact. The activities of the QRM Center in University of Wisconsin‐Madison have resulted in roughly $4.3 Million research contributions since 2008. Several of our industry collaborators have seen bottom‐line impact from our research and been recognized by the State.

Raising National and Global Visibility of the QRM Center: Over the past ten years (2008‐2017), the QRM Center had grown from being regional center for excellence to one with greater national and international appeal. I collaborate extensively with industries across the nation (Mitsubishi Heavy Industries, NOV, Boeing, ALCOA, John Deere, Harley Davidson, Joy Global, Marel, ETC, Rockwell Automation). I have also launched collaborations between UW‐Madison, Texas A&M University and Penn State University. I have played an important role in establishing a QRM research and practice networks through several collaborations across Europe with universities and industries in The Netherlands, Belgium, France, Denmark, Germany, Spain, and Poland. The collaboration has led to joint research programs and sharing of results at annual international conference on QRM.

PROFESSIONAL AND PUBLIC LECTURES 1. Challenges in Manufacturing of Engineered Products for the Oil Industry, NSF Workshop on

Advanced Manufacturing for the Oil and Gas Energy Industry, Houston, TX, 2014 2. Optimal Harvesting and Purification Strategies for Biomanufacturing Operations, Department of

Industrial and Manufacturing Engineering, Penn State University, State College, PA, 2014 3. Towards Successful Implementation of Quick Response Manufacturing, QRM 2014: International

Conference on Quick Response Manufacturing (Opening Research Keynote Talk), HAN University of Applied Sciences, The Netherlands, 2014.

4. Lessons from Implementations of Quick Response Manufacturing, QRM 2012: International Conference on Quick Response Manufacturing, HAN University of Applied Sciences, The Netherlands, 2012.

5. Rapid Modeling Bridges Theory and Practice: Looking Back and Looking Forward, 3rd Rapid Modeling Conference (Research Keynote Talk), Katholieke Universiteit Leuven, Leuven, Belgium, 2011.

6. Blocking Effects in Autonomous Vehicles based Warehouse Systems, Department of Industrial and Systems Engineering, Texas A&M University, 2010.

7. Analytical Models for Unit‐Load Warehouse Systems with Autonomous Vehicles, EURANDOM, TU/e Eindhoven University of Technology, The Netherlands, 2009.

8. POLCA: A Card‐Based Material Control System for Cellular Manufacturing of High Variety and Custom Products, Department of Business Administration, Catholic University of Eichstaett‐Ingolstadt, Ingolstadt, Germany, 2008.

9. Variance‐Based Approximations of Transaction Waiting Times in Autonomous Vehicle Storage and Retrieval Systems, Department of Management of Technology and Innovation, RSM Erasmus University, Rotterdam, The Netherlands, 2007.

10. Stochastic Models for Manufacturing Systems with Product Variety, EURANDOM, TU/e Eindhoven University of Technology, The Netherlands, 2007.

11. Queuing Models for Fabrication Assembly Systems, Laboratoire G‐SCOP (Grenoble ‐ Sciences pour la Conception, l'Optimisation et la Production), Institut National Polytechnique de Grenoble, Grenoble, France, 2007.

12. Queuing Models of Pull‐Type Production Inventory Control Systems, Laboratoire Gnie Industriel, Ecole Centrale Paris, Paris, France, 2007.

29

13. Analysis of Queuing Networks with Fork/Join Synchronization Stations, Department of Applied Mathematics, University of Twente, The Netherlands, 2007.

14. Analytical Models for Queuing Networks with Synchronization Stations. Department of Business Administration, Catholic University of Eichstaett‐Ingolstadt, Ingolstadt, Germany, 2007.

15. Performance Evaluation of Multi‐Product Fabrication/Assembly Systems, Faculty of Applied Economics, Katholieke Universiteit Leuven, Belgium, 2007.

16. Queuing Models for Pull‐Type Production Inventory Systems, School of Industrial Engineering, Oklahoma State University, Oklahoma, 2005.

VISITING FACULTY POSITIONS – SHORT TERM 1. EURANDOM at the Technische Universiteit Eindhoven, The Netherlands (2009) 2. Catholic University of Eichstaett‐Ingolstadt, Germany (2008) 3. Department of Mathematics, IBM TJ Watson Research Lab, Yorktown Heights, New York (2005) HONORS AND AWARDS PERSONAL AWARDS 1. I5 Award in 2017 from Institute of Industrial and Systems Engineering for collaboration work with

Andrew Johnson (Texas A&M), Robert Voigt (Penn State University), and Sushanta Sahu (National Oilwell Varco)

2. Advised T. Martagan, 2017, “Stochastic Models for Biomanufacturing”, Winner of TIMES Dissertation Award, Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Houston, TX.

3. Advised T. Martagan, 2016, “Stochastic Models for Biomanufacturing”, Finalist in Dantzig Dissertation Award, Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Nashville, TN.

4. T. Martagan and A. Krishnamurthy, 2016, “Stochastic Optimization of Protein Purification Operations”, Winner of POMS Applied Research Challenge Award, Orlando, FL

5. Best paper ‐ “Value of Capacity Flexibility in Manufacturing Systems with Seasonal Demands,” IIE Transactions, 2015, (Authors: S. Bhat, A. Krishnamurthy)

6. Advised T. Martagan and A. Krishnamurthy, 2015, “Stochastic Optimization of Protein Purification Operations”, Finalist of MSOM Student Paper, Institute for Operations Research and Management Science (INFORMS) Annual Meeting, Philadelphia, PA.

7. Advised M. Ozen: Early Excellence in Teaching Award, University of Wisconsin‐Madison (2015). 8. Best paper‐Facility Logistics Track, 2011, “Improving Throughput Capacity in Multi‐Tier Warehouses

with Autonomous Vehicles”, Proceedings of the 2011 Industrial Engineering Conference, Reno, NV, 2011. (Authors: D. Roy, A. Krishnamurthy, S.S. Heragu and C.J. Malmborg)

9. Best Paper Award, Finalist for the paper titled “Integrating Advance Demand Information in Supply Chain Contracts”, Proceedings of the 2010 IEEE Conference on Automation Science and Engineering, Toronto, Canada, 2010. (Authors: D. Ge and A. Krishnamurthy)

10. Best paper in Research Track on Manufacturing Systems for the paper titled “Performance Evaluation of the Extended Kanban Control System with Advance Demand Information,” Industrial Engineering Research Conference, 2007, Nashville, TN. (Authors: D. Ge and A. Krishnamurthy)

11. Outstanding Educator Award in 2007 by the School of Engineering, Rensselaer Polytechnic Institute, Troy, NY.

30

12. Best paper in Research Track on Production Planning and Scheduling for the paper titled “Analytical Models for Production Networks with Assembly Operations,” Industrial Engineering Research Conference, 2006, Orlando, FL. (Authors: R. Ramakrishnan and A. Krishnamurthy)

13. Best paper in Research Track on Manufacturing Design for the paper titled “Analytical Models for Multi‐Product Pull Systems with Batch Sizes,” Industrial Engineering Research Conference, 2006, Orlando, FL. (Authors: K. Satyam, and A. Krishnamurthy)

14. Del Ruth and Karger Dissertation Prize in 2006 for outstanding Masters dissertation in the Department of Decision Sciences and Engineering Systems for thesis titled: A Simulation based Analysis of Pull Systems with Advance Demand Information, by David Claudio; Advisor: Prof. Ananth Krishnamurthy.

15. Del Ruth and Karger Dissertation Prize in 2006 for outstanding Ph. D. dissertation in the Department of Decision Sciences and Engineering Systems for thesis titled: Real Time and Simultaneous Management of Supply and Demand Chains, by Ali Yasar; Advisors: Prof. James M Tien (Dept. of DSES, RPI) and Prof. Ananth Krishnamurthy.

16. Frontiers of Engineering, Participant, National Academy of Engineers, 2005 17. Best paper in Research Track on Production Planning and Scheduling for the paper titled “Analytical

Approximations for Kitting Systems with Multiple Inputs,” Industrial Engineering Research Conference, Atlanta, GA, 2005. (Authors: R. Ramakrishnan and A. Krishnamurthy)

18. Runner‐up for the best paper award in Infocom 2005 for the paper titled “Dynamic Node Activation in Networks of Rechargeable Sensors,” Proceedings of Infocom 2005, Miami, FL, 2005. (Authors: K. Kar, A. Krishnamurthy and N. Jaggi)

19. Graduate Mentor Award‐2002, University of Wisconsin‐Madison 20. Research Assistantship, 1996‐2002, Dept. of Industrial Engg., Univ. of Wisconsin‐Madison 21. Top 1% among all students in India in the Joint Entrance Examination for admission to the Indian

Institute of Technology (IIT). 22. Top 0.5% in the National Level Science Talent Search Examination, 1991, held by United Council for

Educational Research and Scientific Advancement in Learning, India. STUDENT AWARDS 1. Advised T. Martagan: Richard S. and Harriet K. Fein Scholarship (2015). 2. Advised M. Ozen: MHIA Honor Scholarship (2015), Material Handling Education Foundation, Inc. 3. Advised A.K. Sinha: Vinod K. and J Gail Sahney Graduate Student Scholarship (2014). 4. Advised S. Bhat: Richard S. and Harriet K. Fein Scholarship (2014). 5. Advised T. Martagan: MHIA Honor Scholarship (2014), Material Handling Education Foundation, Inc. 6. Advised M. Ozen: MHIA Honor Scholarship (2014), Material Handling Education Foundation, Inc. 7. Advised T. Martagan: MHIA Honor Scholarship (2013), Material Handling Education Foundation, Inc. 8. Advised S. Bhat: MHIA Honor Scholarship (2013), Material Handling Education Foundation, Inc. 9. Advised S. Bhat: Graduate Fellowship, NSF CMMI Engineering Research Innovation Conf., 2012. 10. Advised T. Martagan: Frazier Scholarship (2012), Material Handling Education Foundation, Inc. 11. Advised S. Bhat: Vinod K. and J Gail Sahney Graduate Student Scholarship (2012). 12. Advised S. Bhat: MHIA Honor Scholarship (2012), Material Handling Education Foundation, Inc. 13. Advised D. Roy: MHIA Honor Scholarship (2011), Material Handling Education Foundation, Inc. 14. Advised D. Roy: Wunsch Material Handling First Prize (2010) for the best paper on Material

Handling, College of Engineering, University of Wisconsin‐Madison 15. Advised D. Roy: MHIA Honor Scholarship (2010), Material Handling Education Foundation, Inc. 16. Advised D. Roy: Wunsch Material Handling First Prize (2009) for the best paper on Material Handling

Topics, College of Engineering, University of Wisconsin‐Madison

31

17. Advised D. Roy: K. Vinod and J. Gail Sahney Scholarship (2008) for academic excellence, Department of Industrial and Systems Engineering, University of Wisconsin‐Madison, USA

18. Advised D. Claudio: Del Ruth and Karger Dissertation Prize in 2007 for outstanding Masters dissertation in the Department of Decision Sciences and Engineering Systems for thesis titled: A Simulation based Analysis of Pull Systems with Advance Demand Information, by D. Claudio; Advisor: Prof. A. Krishnamurthy, (Dept. of DSES, RPI)

19. Co‐advised A. Yasar: Del Ruth and Karger Dissertation Prize in 2006 for outstanding dissertation in the Department of Decision Sciences and Engineering Systems for thesis titled: Real Time and Simultaneous Management of Supply and Demand Chains; Advisors: Prof. J.M. Tien (Dept. of DSES) and Prof. A. Krishnamurthy (Dept. of DSES)

20. Advised D. Claudio: Three Year NSF Graduate Fellowship for doctoral research proposal on “Pull Systems with Advance Demand Information,” March 2005‐March 2008. Advisor: Prof. A. Krishnamurthy, (Dept. of DSES, RPI)

ANANTH KRISHNAMURTHY Professor, Decision Sciences Indian ... · Krishnamurthy, R. Suri and M....

Documents

Transcript of ANANTH KRISHNAMURTHY Professor, Decision Sciences Indian ... · Krishnamurthy, R. Suri and M....