Analog Dimmer to DMX Bridge - eldoled.com...Communication bi-directional for configuration and...
5
Datasheet Analog Dimmer to DMX Bridge © 2018 eldoLED. All rights reserved. V3.0 All content contained herein is subject to change without prior notice. More product documentation and eldoLED's warranty and terms and conditions are available at www.eldoLED.com. eldoLED bridges The analog-to-DMX bridge is part of the series of bridges developed by eldoLED to interface between DMX/LedSync networks and other network protocols. Analog to DMX Bridge The analog-to-DMX bridge translates analog dimmer signals into DMX- and LedSync-compatible control signals. The bridge comes in a DMX bridge and 5DMX bridge version. The first one allows you to pass on the converted signal to one DMX universe, the latter one to up to five DMX universes. The eldoLED analog-to-DMX bridges are ideally suited to retrofit existing analog lighting installations. They allow you to make use of all the advantages offered by the digital LedSync network signals, such as prime signal integrity over long cable lengths. Features Plug and play solution for LED dimming in existing aplications Screw terminals for easy connection of leads Operating supply voltage range 12V - 32V DC Interface 0-10V Advantages Conversion of DC dimmer into USITT DMX512 or LedSync signals Accurate dimming solution Easy network setup Simplifies total system solution Calibrating dimming values The output of the dimmers that are available on the market today varies. eldoLED’s analog-to-DMX bridges have solved this problem: they let you calibrate dimming values, offering you maximum flexibility and the possibility of optimum system integration. Analog Dimmer to DMX Bridge
Transcript of Analog Dimmer to DMX Bridge - eldoled.com...Communication bi-directional for configuration and...
Datasheet
Analog Dimmer to DMX Bridge
© 2018 eldoLED. All rights reserved. V3.0 All content contained herein is subject to change without prior notice.More product documentation and eldoLED's warranty and terms and conditions are available at www.eldoLED.com.
eldoLED bridges
The analog-to-DMX bridge is part of the series of bridges developed by eldoLED to interface between DMX/LedSync networks andother network protocols.
Analog to DMX Bridge
The analog-to-DMX bridge translates analog dimmer signals into DMX- and LedSync-compatible control signals.
The bridge comes in a DMX bridge and 5DMX bridge version. The first one allows you to pass on the converted signal to one DMXuniverse, the latter one to up to five DMX universes.
The eldoLED analog-to-DMX bridges are ideally suited to retrofit existing analog lighting installations. They allow you to make use of allthe advantages offered by the digital LedSync network signals, such as prime signal integrity over long cable lengths.
Features
Plug and play solution for LED dimming in existing aplications
Screw terminals for easy connection of leads
Operating supply voltage range 12V - 32V DC
Interface 0-10V
Advantages
Conversion of DC dimmer into USITT DMX512 or LedSync signals
Accurate dimming solution
Easy network setup
Simplifies total system solution
Calibrating dimming values
The output of the dimmers that are available on the market today varies. eldoLED’s analog-to-DMX bridges have solved this problem:they let you calibrate dimming values, offering you maximum flexibility and the possibility of optimum system integration.
Analog Dimmer to DMX Bridge
5DMX: 0-10V analog input
In addition to the dimmer connection, the 5DMX version supports a 0-10V signal.Typically, this type of signal is generated by building automation systems or light controllers and can be used to set the output of allconnected LEDs.
Product offering
Product name DMX Bridge Pro
Part number (P/N) BDA10501
Product description Analog to 1x512 DMX, parameter controlled
Product name 5DMX Bridge Pro
Part number (P/N) BDA50501
Product description 0-10V to 5x512 DMX, parameter controlled
Order number configurator
P/N
P/N Part number of product
Datasheet
Analog Dimmer to DMX Bridge
2/5
Warranty
Warranty period General Terms and Conditions
Electrical data
Operating supply voltage range 12-32V DC IN
Reverse polarity protection yes
Processor eldoLED BridgeLogic 400
Dynamic effects
Control channel 1 – 512 0 - 100%
Network control
DMX Bridge Pro
Communication bi-directional for configuration and temperature read-out
Network channels 512
Network output USITT DMX512A and LedSync-compatible, based on RS485 specification
Update rate 22ms
5DMX Bridge Pro
Communication bi-directional for configuration and temperature read-out
Network channels 5x512
Network output USITT DMX512A and LedSync-compatible, based on RS485 specification
Update rate 22ms
Environmental conditions
Operating ambient temperature (Ta) range 0 ºC to +60 ºC
Storage temperature -40 ºC to +95 ºC
Humidity non-condensing
Datasheet
Analog Dimmer to DMX Bridge
3/5
Thermal data
Cooling passive
Mechanical details
DMX Bridge Pro
Length x Width 68mm x 50mm / 2.68” x 1.97”
5DMX Bridge Pro
Length x Width 94mm x 49mm / 3.7” x 1.93”
Datasheet
Analog Dimmer to DMX Bridge
4/5
Wiring diagram
in in inout out
Analog-to-DMX bridge
Standard Dimmer
Connections
DMX Bridge Pro
Data screw terminals (3)
Dimmer input screw terminals (2)
Power screw terminals (2)
5DMX Bridge Pro
Data screw terminals (15)
Dimmer input screw terminals (2)
Power screw terminals (2)
Analog input screw terminals (3)
Mounting data
Mounting orientation any
Mounting holes for DMX bridge M3 screws (2) and M4 screws (2)
Mounting holes for 5DMX bridge M4 screws (4) and M5 screws (2)
Datasheet
Analog Dimmer to DMX Bridge
5/5
Europe, Rest of World North America
eldoLED B.V. eldoLED AmericaScience Park Eindhoven 5125 One Lithonia Way5692 ED Son Conyers, GA 30012The Netherlands USA
E: [email protected] E: [email protected]: www.eldoled.com W: www.eldoled.com
