An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

77
An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry Chuck Cain U.S. Nuclear Regulatory Commission, Region IV Arlington, Texas

description

An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry. Chuck Cain U.S. Nuclear Regulatory Commission, Region IV Arlington, Texas. Implementing Legislation. Atomic Energy Act of 1954 established the Atomic Energy Commission (AEC) Energy Reorganization Act of 1974 - PowerPoint PPT Presentation

Transcript of An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Page 1: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

An Overview ofthe Nuclear Fuel Cycle

and Radioactive MaterialsIndustry

Chuck CainU.S. Nuclear Regulatory Commission, Region IVArlington, Texas

Page 2: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Implementing LegislationAtomic Energy Act of 1954

established the Atomic Energy Commission (AEC)

Energy Reorganization Act of 1974 separated the peaceful uses regulatory

function from the weapons function established the NRC weapons function eventually included in

Department of Energy (DOE)

Page 3: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Energy Policy Act of 2005Authorizes NRC to regulate naturally

occurring material and accelerator-produced material

Page 4: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Agreement StatesThese are States that have agreements

with NRC to regulate radioactive materials within their borders (except reactors)

All States in NRC Region IV are Agreement States except Montana, Wyoming, South Dakota, Idaho, Alaska, and Hawaii

Page 5: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Agreement State Map

Page 6: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Since 9/11……particular attention is paid to security

and not only safety (user qualification and equipment)

Page 7: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 8: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Uranium Mining and Milling Mining by conventional methods or by In-situ

leaching

Ore is < 1% uranium

Mill extracts uranium from ore; rest is tailings

Mill product is uranium oxide (known as yellowcake) and is shipped in 55-gallon drums

Page 9: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

The SweetwaterMine & Mill(Wyoming)

Page 10: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 11: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Atlas Mineralson Colorado Rivernear Moab, UT

Page 12: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 13: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 14: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Typical in situ Leach Well Field

Page 15: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

TYPICAL SOLUTION FLOW PATTERNS

0 60' 120' 180' 240'

LEGEND

INJECTION WELL

PRODUCTION WELL

EXPECTED FLOW PATTERN

Page 16: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Yellowcake belt dryer

Page 17: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Yellowcake Product

Yellowcake is packaged into 55-gallon drums and prepared for shipment.

Page 18: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 19: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Facts About YellowcakeCan be held in hands without harm.A drum of yellowcake weighs about

1,000 pounds. Natural uranium contains mostly

uranium-238 (99.3%).We want the U-235 which is only 0.7%

of natural uranium.

Page 20: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Enriched UraniumThe next challenge is to enrich the

uranium (increase the proportion of U-235)

Enrichment plants usually work by gaseous diffusion; therefore, the uranium must be converted to a gas.

Page 21: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Conversion Plants Produce

UF6

Yellowcake can be converted to uranium hexafluoride which has a triple point of 147° F

Honeywell, Metropolis, ILSequoyah Fuels, Gore, OK (closed)

Page 22: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Enrichment PlantsSince an atom of U-238 is larger than

an atom of U-235, the atoms can be filtered at a gaseous diffusion enrichment plant.

Uranium must be enriched to ~10% to make nuclear fuel for a reactor.

Page 23: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Oak Ridge

Page 24: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Paducah Gaseous Diffusion Plant

Page 25: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

UF6 is stored in cylinders. This one is rated at 14 tons.

Page 26: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 27: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 28: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Depleted UraniumDepleted uranium is a waste product of

the enrichment process.Depleted uranium is “depleted” in U-235

(less than 0.7% U-235).DU can be used for purposes where a

heavy mass is needed, such as military projectiles.

Page 29: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 30: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 31: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

New TechnologiesGas centrifuge

Louisiana Energy Services Areva

Laser separation

Page 32: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Fuel Fabrication

The enriched UF6 is converted to a

powdered chemical form and made into fuel pellets.

Page 33: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 34: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 35: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 36: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 37: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Spent Fuel Eventually fuel elements become “poisoned”

during the fission process and need to be replaced.

This is considered “high-level” waste. There is still much good U-235 left in spent

nuclear fuel. The “poisons” (byproduct material) produced

during the fission process are high-energy gamma emitters.

Page 38: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Spent fuel

Page 39: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Spent fuel stored in a fuel pool

Page 40: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

What’s next for spent fuel?Several options

store at reactor site in pool store at site in Independent Spent Fuel

Storage Installation (ISFSI) burial at geological repository reprocess (recycle) to separate the

remaining good uranium from the waste

Page 41: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Arkansas Nuclear One ISFSI

Page 42: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 43: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Rancho SecoISFSI

Page 44: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Yucca Mountain, Nevada

Page 45: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Also, Low-Level WasteContaminated or potentially

contaminated items such as protective clothing, building materials, tools, etc.

Burial at licensed disposal site such as EnergySolutions (UT or SC), U.S. Ecology (WA)

Page 46: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Quantity of Radioactive Material

Unit of measurement - curies or becquerels

Page 47: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Half-LifeTime it takes for half of a radioactive

material to decayCobalt-60, 5 yearsUranium, millions of yearsSome materials decay with a half-life in

minutes or seconds, such as those for medical use.

Page 48: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Dose to RadiationUnits of rems or sieverts Radiation worker limit is 5 rems Limit for a member of the public is 100

millirems

Page 49: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Uses of Radioactive Materials

Page 50: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Kinds of LicensesSpecificGeneral (e.g., tritium exit signs)Exempt (e.g., smoke alarms)

Page 51: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

“Materials” ApplicationsMedical (diagnosis, therapy)Academic Industrial (radiography, gauges,

petroleum industry)

Page 52: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Industrial Radiography

Page 53: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Radiography “cameras”

Page 54: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

100 curies of iridium-192 in “pigtail”

Page 55: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Nuclear Gauges

Page 56: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 57: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 58: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 59: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 60: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Petroleum Well LoggingRadioactive materials are installed in

tools to characterize producing zones deep underground

Page 61: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 62: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 63: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Injury to hands caused by radiation exposure from radiography source

Page 64: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Day 14 – Medical attention first received;swelling, tenderness, skindarkening and some blisteringis evident. Estimated exposure 22K – 30K rems.

Page 65: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Day 19 – Extensive blistering is apparent.

Page 66: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Day 24 – Blisters are breaking anddead skin is sloughing off,exposing raw tissue underneath.

Page 67: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Day 27 – Areas of obvious injurycontinue to grow larger,with no evidence of healing.Increasing pain in damagedareas.

Page 68: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Day 56 – Pain has increased until damaged tissues can no longer be exposed to air.Decision to perform skingrafts.

Page 69: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Day 102 – Extensive skin grafting complete. Deep tissue injury continues.

Page 70: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

5 years – Loss of fingers; hands sensitive to heat and cold;additional amputationsmay be required.

Page 71: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Another Radiation Exposure Case

Warehouse worker finds radiography source on floor after radiographer leaves

Worker places source pigtail in back pocket and asks secretary to call radiography company to come pick it up

Page 72: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

100 curies of iridium-192 in “pigtail”

Page 73: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 74: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 75: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry
Page 76: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Radioactive Materials Not LicensedCertain jewelry itemsFiesta wareColeman lantern mantlesSmoke detectors

Page 77: An Overview of the Nuclear Fuel Cycle and Radioactive Materials Industry

Remaining Questions?