Amperometric biosensors - Aalborg...
Transcript of Amperometric biosensors - Aalborg...
Amperometric biosensors
Lecture 2
Amperometric Sensors: Problem formulation• amperometric techniques have some selectivity as every RedOx reaction
has it’s own characteristic potential
-0.76
-0.40
-0.34
-0.34
-0.13
+0.16
E0, V
2Cu e Cu+ ++ →
2 2Pb e Pb+ + →
2 2Tl e Tl+ + →
3 3In e In+ + →
2 2Cd e Cd+ + →2 2Zn e Zn+ ++ →
Problem formulation
Electrode Reactions
• Current:– Faradaic current: current associated with Oxidation/Reduction of
species of interestA Be+ →
CI dECA dt
′=
– Capacitive current: charging of double layer
– Other background currents due to presence of other speciese.g. oxygen
Electrode Reactions• Faradaic current:
A Bne+ →
rate of arrival of A = 1/n rate of e-transfer = rate of departure
A
B
ne
electrode
1A B
IJ Jn AF
− = =
The rate of charge transfer
• First order reactionOx Redeν −+ →
the rate of reduction: [ ]Ox cv k Ox=
the rate of oxidation: [ ]Red Redav k=
[ ]c cj Fk Oxν=
[ ]a Redaj Fkν=
[ ] [ ]a Red Oxc a cj j j Fk Fkν ν= − = −
• The activation Gibbs energy/G RTk Be
∗−∆=
[ ] [ ]/ /Red Oxa cG RT G RTa a c aj Fk B e Fk B eν ν
∗ ∗−∆ −∆= −
both processes involve activation
The Butler-Volmer equation• Reduction reaction
(0)c cG G F φ∗ ∗∆ = ∆ + ∆
Ox Redeν −+ →
transition state is product like:
(0)c cG G∗ ∗∆ ≈ ∆transition state is reagent like:
(0)c cG G Fα φ∗ ∗∆ = ∆ + ∆cathodic transfer coefficientusually approx. 0.5
• Oxidation reaction(0)c cG G F φ∗ ∗∆ = ∆ − ∆
Red Oxeν −− →
transition state is product like:
(0)c cG G∗ ∗∆ ≈ ∆transition state is reagent like:
(0) (1 )c cG G Fα φ∗ ∗∆ = ∆ − − ∆
The Butler-Volmer equation
[ ] [ ](0) / /(1 ) / /Red Oxa cG RT G RTF RT F RTa a c aj Fk B e e Fk B e eα φ α φν ν
∗ ∗−∆ −∆− ∆ − ∆= −
if the cell is balanced (j=0) by an external source, E:
[ ][ ]
(0) / (1 )
/
Red
Ox
a
c
G RT fEa a a
G RT fEc c a
j Fk B e e
j Fk B e e
α
α
ν
ν
∗
∗
−∆ −
−∆ −
=
=a 0 ,c
Fj j j fRT
= = =
exchange current density
now, if a voltage is supplied:
E Eη ′= − (1 )0 ( )f fj j e eα η α η− −= − The Butler-Volmer equation
The Butler-Volmer equation
• The low overpotential limit
(1 )0 ( )f fj j e eα η α η− −= −
1, in practice 0.01Vfη η <
0 0(1 (1 ) ... 1 ...)j j f f j fα η α η η= + − + − − − ≈
0
jj f
η ≈ Ohm’s law
• The high overpotential limit in practice 0.12Vη ≥
(1 )0
fj j e α η−=positive overpotential:
0fj j e α η−=negative overpotential:
Tafel plot
• a plot of ln(j) vs. overpotential is called Tafel plot
Mass transport mechanisms
• Migration (for ions) in response to a gradient of potential
• Diffusion in response to a concentration gradient
• Convection in response to pressure gradient
[ ]cJ A v=
[ ]c A
AJ D
x∂
= −∂
[ ]im i
i
z F EJ D iRT x− ∂
=∂∑
Voltammetry
• concentration polarization
non-polarizable electrodes: potential changes only slightly with current,polarizable electrodes: potential changes significantly with currentreference electrodes are highly non-polarizable
phenomena related to consumption of the reactive species on the electrode
0 0
0
ln ln ln
ln
RT RT RTE E a E czF zF zFRTE E czF
γ= + = + +
= +
at zero current:
with current: 0 lnRTE E czF
′ ′= +
lnc RT cE EzF c
η′⎛ ⎞′= − = ⎜ ⎟
⎝ ⎠
Voltammetry• concentration polarization
lnc RT cE EzF c
η′⎛ ⎞′= − = ⎜ ⎟
⎝ ⎠
First Fick’s law: c c cJ D Dx
c cj zFJ zFD
δ
δ
′∂ −⎛ ⎞= − =⎜ ⎟∂⎝ ⎠′−
= =
limiting current densitylim
c cRTj zFDzF
λδ δ
= =
using Nernst-Einstein equation,l – ionic conductivity
ln 1c RT jzF zcFD
δη ⎛ ⎞= −⎜ ⎟⎝ ⎠
conc. overpotential vs current:
Voltammetry
• linear sweep voltammetry
• differential pulse voltammetry
• cyclic voltammetry
current difference before and after pulse is measured
potential is applied in a sawtooth manner
• Linearly varied potential is applied between working electrode and reference electrode while current is monitored• current maximum is proportional to the concentration
Voltammetry: Example
• electro reduction of p-bromonitrobenzene
6 4 2 6 4 2
6 4 2 6 4 2
6 4 2 6 4 2
6 4 2 6 5 2
BrC H NO e BrC H NO
BrC H NO C H NO Br
C H NO e C H NO
C H NO H C H NO
− −
− −
− −
− +
+ ⎯⎯→
⎯⎯→• +
• + ⎯⎯→
+ ⎯⎯→
forward
backward fast
backward slow
Linear Sweep Voltammetry (LSW)
• Linearly varied potential is applied between working electrode and reference electrode while current is monitored.
Background current
Ip~[Ox]
Ip
Chronoamperometry
• The potential is stepped to E2>Ep, current is monitored as a function of time
current decay due to mass transfer limitation
limiting value:½
oxnFAD Ciδ
=
Kinetic and Catalytic Effects• usually, there is another chemical reaction coupled to the electron
transfer– consumption of reduced product
–regeneration of the oxidized reagentof the oxidized reagent
Voltammogram of ferrocene
w.glucose+GOX
w. glucose
forward
backward fast
backward slow
Amperometric Sensors• amperometric techniques have some selectivity as every RedOx reaction
has it’s own characteristic potential• however the selectivity is limited unless modified electrodes are used
Differential pulse polarogram for a mixture of six cations
Amperometric Biosensors
• First Generation – oxygen electrode based sensors• Second Generation – mediator based sensors• Third Generation – directly coupled enzyme
electrodes
Possible glucose detection schemes
1st generationschemes 2nd generation
schemes
3rd generationschemes
oxygen electrode based sensors
Electrolyte gel
Pt catode
Ag anode
Teflon membrane
Glucose oxidase on nylon net
Cellophane membrane
O-rings
Clark’s electrode
Measuring oxygen:
E=-0.7V
E=+0.65V
Measuring hydrogen peroxide:
Problems: fairly high potential (interference is probable), oxygen needs to be controlled and replenished (e.g. By oxygen generating reaction or by pumping oxygen containing buffer)
Problem: still fairly high potential (interference from e.g. ascorbic asid)
Mediator Based Sensors
• Oxygen is substituted with another oxidizing agent (electron transfer agent)
• Iron ions or complexes are most common mediators
Fc
Free Fe3+ are subject to hydrolysis and precipitation
Good Mediator
• Rapid reaction with enzyme• Fast electron transfer kinetics• Low overpotential• Independent of pH• Stable in Ox and R forms• Doesn’t react with oxygen• Non toxic
Fc derivatives
Various mediators (natural and artificial)
How it works...
Fc+glucose
Fc+glucose+GOD
In real biosensors both GOD and Fc are immobilised
Directly Coupled Enzyme
• Generally, the enzyme might denature on the electrode surface;
• electron transfer reaction might be slow • Thus, the surface has to be modified...
• Enzymes can be directly wired to the electrode using organic conducting salts (e.g.TTF/TCNQ) or redox polymers
• Enzymes can be modified to facilitate electron transfer and attachement
Possible glucose detection schemes
Design example: Glucose sensor
• Aim: for use by patient at home (should be simple, reliable and cheap)
• Performance: blood glucose range 1.1-33.3 mM; precision 3-8%; test time 30s; life time 6 month.
• Selective element: Glucose Oxidase – inexpensive, stable over long period
• Transducer: Amperometric (GOD+Fc) – cheap, reliable, easy read-out with LCD.
• Immobilisation: covalent bonding for long life (graphite foil coated with Fc, GOD immobilised)
ExacTech Glucose Sensor
Problems
• The transfer coefficient of a certain electrode in contact with M2+ and M3+ in aqueous solution at 25°C is 0.55. The current density is found to be 14.0 mA·cm-2 when the overvoltage is 130 mV. What is the overvoltage required for a current density of 85 mA·cm-2 ?