AMPAC EWIS
Transcript of AMPAC EWIS
DUE TO AMPAC’S COMMITMENT TO CONTINUOUS
IMPROVEMENT, SPECIF ICATIONS MAY CHANGE
WITHOUT NOTICE
FOR A QUOTATION AND FURTHER INFORMATION, GO TO:
w w w . a m p a c . n e t46
Features
EMERG
ENCY W
ARN
ING
&IN
TERCOM
SYSTEMS
• Modular system design – can be easily customised to meet special requirements
• Discrete front panel control – ‘natural’ style layout easy to locate zones
• Amplifi ers available are 40, 120, 240 & 480-watts – choice of amplifi ers to suit your need
• Visual output for hearing impaired or noisy environments
• Common or individual fi re alarm inputs – an “All Call” or staged evacuation may be confi gured
• 2-wire Warden Intercom Phones (WIP) or 3- wire if connecting to an Emergency Alarm Initiating Device (EAID) – monitored for open and short circuit
• Common or zoned background music inputs – non-emergency input that gives EV3000 the fl exibility to fi t most applications including shopping centres and hospitals; to name a few
• Monitoring of speaker circuits – monitoring for short or open circuit
• Monitoring of Visual Warning indicators – monitoring for short or open circuit
• Automatic volume control incorporating the ambient noise sensing microphone – ideal feature for applications where the ambient noise levels are different at various times of the day
• Fail safe volume override output – used as a control to shutdown all non-emergency facilities offered by the EV3000 and to override attenuated volume controls located in the fi eld
• Stand-by signal generators – provides 100% backup of emergency tones for greater reliability
• Stand-by microphone amplifi ers – provides 100% backup of emergency public address for greater reliability
• Automatic changeover to stand-by amplifi er – automatic changeover to a stand-by amplifi er may be confi gured in the event an active amplifi er is faulty
• Digital paging console – attractive remote paging console with seven (7) segment digital display and keypad gives operator quick and easy access to paging zones
• Networked system – expands EV3000 features to include Master / Sub panel confi guration, and remote paging console
• Optic Fibre Interface – the optional Optic Fibre Interface allows the EV3000 to be networked over optic fi bre cables
Product InformationThe Ampac EV3000 Occupant Warning and Intercom System is designed for the purpose of enabling the orderly evacuation of occupants, from a building or structure, in the event of an emergency. The system comprises of two (2) sub-systems. The fi rst being the Occupant Warning System (OWS) and the other the Occupant Intercom System (OIS). While the Warning and Intercom System have separate controls, they coexist in a panel that is logically presented and aesthetically pleasing.The Occupant Warning System makes use of speakers strategically placed around the site, to broadcast ALERT, and/or EVACUATION signals or public address announcements. The OWS may be automatically initiated or manually operated. When not used in an emergency situation, the EV3000 can broadcast background music and/or general paging announcements.The Occupant Intercom System (OIS) consists of front panel control at the Emergency Control Panel (ECP) and Warden Intercom Phones (WIP) that are strategically placed throughout the building. Communication is only possible between the WIP and ECP. For larger sites, multiple control panels may be networked.
EV3000
Emergency Warning & Intercom Systems
REFER TO DATA SHEET: PDS105-0001
A S 1 6 7 0 v e r s i o n
DUE TO AMPAC’S COMMITMENT TO CONTINUOUS
IMPROVEMENT, SPECIF ICATIONS MAY CHANGE
WITHOUT NOTICE
FOR A QUOTATION AND FURTHER INFORMATION, GO TO:
w w w . a m p a c . n e t 47
EMERG
ENCY W
ARN
ING
&IN
TERCOM
SYSTEMS
Master EmergencyControl Panel (MECP)
Remote Paging Console
Secondary EmergencyControl Panel (SECP)
WIP
EAID
WIP EAID
Audio Bus
Communication Bus
Warden Intercom Point
Emergency Alarm Initiating Device
End-of-Line device
Speakers
Visual Warning Device
EOL
EOL
EOL
WIP EAID
Speakers
EOL
EOL
Fire AlarmControl Panel
Inputs
Background Music Inputs
240 VAC
Fire AlarmControl Panel
Inputs
Background Music Inputs
EV3000 (cont.) System Configuration
Emergency Warning & Intercom Systems
240 VAC
Visual Warning Device
DUE TO AMPAC’S COMMITMENT TO CONTINUOUS
IMPROVEMENT, SPECIF ICATIONS MAY CHANGE
WITHOUT NOTICE
FOR A QUOTATION AND FURTHER INFORMATION, GO TO:
w w w . a m p a c . n e t48
Features
Features
Features
EMERG
ENCY W
ARN
ING
&IN
TERCOM
SYSTEMS
Voltage 24 VDCQuiescent current 58mAMax current 3400mAMax output power 40 WattsOutput voltage 100 VAC RMSFreq. Response 150Hz to 12kHz (±1dB)Distortion Max 1% at full load
(typical 0.5%)Sensitivity +5dB <200Kohm balanced)
(1.4VRMS)Overload 100 VRMS + 10%Weight 675 grams
• A modular power amplifier that is rated at40 watts
• Multi-channel audio input supports Alerttone, Evacuation tone, Public Address, andbackground music
• Continuous monitoring of amplifier and 100volt speaker circuit
• Overload protection with Automatic• Easily plugs into an Ampac EV3000 amplifier
frame• Can fit up to 8 amplifiers per frame
• A modular power amplifier that is rated at120 watts
• Multi-channel audio input supports Alerttone, Evacuation tone, Public Address, andbackground music
• Continuous monitoring of amplifier and100 volt speaker circuit
• Overload protection with Automatic• Easily plugs into an Ampac EV3000 amplifier
frame• Can fit up to 4 amplifiers per frame
Voltage 24 VDCQuiescent current 175mAMax current 8100mAMax output power 120 WattsOutput voltage 100 VAC RMSFreq. Response 210Hz to 14.5kHz (±1dB)Distortion < 0.2% at full loadSignal to Noise 77 dBOverload 100 VRMS + 10%Weight 1160 grams
Order Code 332-0004
• When utilised in the EV3000, this boardprovides 100% backup for the main microphoneand back ground music (BGM) input
• Provides amplification for microphone andimpedance matching for BGM input
• Only one (1) stand-by card is permitted persystem
Order Code 302-484B
Weight 230 grams
Order Code 154-0075
EV3000
40Watt Power Amplifier
REFER TO DATA SHEET: PDS154-0075
REFER TO DATA SHEET: PDS332-0004
120Watt Power Amplifier
Stand-by Microphone / BGM Mixer
EV3000 (cont.) Panel Add-ons
Emergency Warning & Intercom Systems
DUE TO AMPAC’S COMMITMENT TO CONTINUOUS
IMPROVEMENT, SPECIF ICATIONS MAY CHANGE
WITHOUT NOTICE
FOR A QUOTATION AND FURTHER INFORMATION, GO TO:
w w w . a m p a c . n e t 49
Order Code Compliance Approved By
Features
Features
EMERG
ENCY W
ARN
ING
&IN
TERCOM
SYSTEMS
Weight 180 grams
• Each Power Supply Regulator Moduleincreases the charge current capacity of theEV3000 by 6.5 amperes
• Slots into the power supply frame (16U & 29Ucabinets only)
• Up to four (4) Power Supply Regulator Modulesper frame
It is important to check with the service contractor before adding modules to the EV3000
Weight 310 grams
Order Code 302-4822
Order Code Compliance Approved By
Order Code 302-491B
• When utilised in the EV3000, this boardprovides 100% backup for the main signal /speech generator
• Provides Alert and Evacuation signals toAS1670.4
• Playback of stored digitised speech• Only one (1) stand-by card is permitted
per system• Volume levels are factory set
Stand-by Signal / Speech Generator Board
EV3000
27 Volt Power Supply Regulator Module
EV3000 (cont.) Panel Add-ons
Emergency Warning & Intercom Systems
Features
Order Code 154-0005
Order Code Compliance Approved By
Features
Features
Features
DUE TO AMPAC’S COMMITMENT TO CONTINUOUS
IMPROVEMENT, SPECIF ICATIONS MAY CHANGE
WITHOUT NOTICE
FOR A QUOTATION AND FURTHER INFORMATION, GO TO:
w w w . a m p a c . n e t50
EMERG
ENCY W
ARN
ING
&IN
TERCOM
SYSTEMS
Remote Paging Console
Operating Voltage 27 VDC (line driven)Line Voltage On hook - 25 VDC max
Off hook - 14 VDC maxCurrent draw On hook - 5 mA max
Off hook - 35 mA maxLine Impedance 360 ohm balancedLine Level 0 dB (± 3dB)Cabling 2 or 3 wire - 2.5mm2 max.Dimensions 215H x 85W x 62D mmWeight 380 grams
Order Code 219-0007 Warden Intercom Phone (WIP)291-0054 WIP Enclosure Metal Surface Mounted
Size 80H x 300W x 220D mmSupply voltage 12 VDCCurrent 400 mACommunication RS 485Weight 1160 grams
• The WIP is installed remote to the ECP• Provides intercommunication between users
at the WIP and Emergency Control Panel• This feature is only available when the
Emergency Warning Intercom facility hasbeen incorporated in the control panel
• Made of high impact red ABS plastic
• Provides a point to initiate a non-emergencyvoice announcement via the EV3000
• Provides a pre-announcement tone• Easy keypad operation to broadcast voice
announcements to selected zones, or group ofzones
• Connects to EV3000 via RS485• Derives power from the EV3000 panel
REFER TO DATA SHEET: PDS154-0005
REFER TO DATA SHEET: PDS219-0007
Warden Intercom Phone
EV3000 (cont.) Panel Add-ons
Emergency Warning & Intercom Systems
DUE TO AMPAC’S COMMITMENT TO CONTINUOUS
IMPROVEMENT, SPECIF ICATIONS MAY CHANGE
WITHOUT NOTICE
FOR A QUOTATION AND FURTHER INFORMATION, GO TO:
w w w . a m p a c . n e t 51
EMERG
ENCY W
ARN
ING
&IN
TERCOM
SYSTEMS
MECHANICAL SPECIFICATIONS
Material 1.6mm Mild SteelFinish Powder Coated Arch WhiteDimensions 10U 700H x 625W x 240D mm (SECP only)
12U 900H x 650W x 290D mm 16U 1200H x 700W x 375D mm 29U 1800H x 700W x 375D mmApprovals SSL – AS2220.89Signals Compliant with AS1670.4:2004
ELECTRICAL
Power Supply 6.5, 13, 19.5 or 26 Amps @ 24 VDCCommunication RS485 @ 9600 bpsEWS Zones 144 maxEIS Zones 288 maxPaging Console 8 max (recommended)ECP’s 12 max (recommended)Visual Warning 8 max per circuit
INDICATORS
Description Colour
Common Isolate (Keyswitch) Amber Automatic (Keyswitch) Green All Call PA Green All Call Alert Amber All Call Evac Red Power On Green System On Batteries Red Charger Fault Amber Battery Fault Amber Battery Isolated Amber Tone Fault Amber ECP in Control Red Alarm System Isolate Amber Comms Fault Amber System Fault Amber Module Fault Amber Microphone Fault Amber Amplifier/Speaker Fault Amber EAID Fault Amber Visual Line Fault Amber Alarm System Fault AmberEWS Zone P.A. Green Alert Amber Evac Red Fault Amber Alarm RedEIS Zone WIP Select Red Zone Cleared Green Fault Amber
Order Code Model Compliance Approved By105-0001 12 U MECP AS2220 SSL105-0002 16 U MECP AS2220 SSL105-0003 29 U MECP AS2220 SSL105-0004 10 U SECP AS2220 SSL105-0005 12 U SECP AS2220 SSL105-0006 16 U SECP AS2220 SSL
E V 3 0 0 0 1 2 U
Wa r d e n I n t e r c o m P h o n e
R e m o t e Pa g i n g C o n s o l e
Emergency Warning & Intercom Systems
EV3000 (cont.)System to AS2220:89Signals to AS1670.4