Amgard Brochure
Transcript of Amgard Brochure
• LIGHTING POLE• GUARD RAIL• OPEN BOX BEAM• PEDESTRIAN FENCE
WHERE SAFETY AND QUALITY ARE CONCERN
• INDUSTRIAL VENT• SIGNAL LIGHT BARRIER• HOT-DIP GALVANIZING PLANT• SHOT BLASTING PLANT
www.ameeri.com.bh
� www. amee r i . c om .bh
Where Safety and Quality are concern, AMEERI INDUSTRIES’s
brand offers the same for the products it manufactures.
LIGHTINGPOLES(StreetLightPoles,GardenLightPolesetc.)
CRASHBARRIERSorROADGUARDRAILSandAccessories
OPENBOXBEAMBARRIERS
PEDESTRIANFENCE
SIGNALLIGHTPOLES&FENCE
INDUSTRIALVENT
CABLETRAY&TRUNKING
HOTDIPGALVANIZINGPLANT has 12.5mtr long x 1.5mtr wide and 2mtr depth Galvanizing kettle to do Hot Dip Galvanizing works.
SHOTBLASTINGPLANT
Photos of Amgard’s participation in Middle East Electricity Exhibition
�
Meeting and Assuring Best Quality
amga r d@amee r i . c om .bh
Poles meet International Standards (BS EN) for heavy duty Mild Steel Hot Dip Galvanized Light Poles with an appropriate thickness that can withstand very hot and humid climate. The Galvanized Poles are protected against corrosion and its durability ranges even over 100 years.
Poles designed to meet maximum loading using Bracket Configuration, Poles are manufactured with optional as Flanged (with Base) or Root Base.
Poles are durable and are easy to transport and install. The Poles can be used for lighting highways, industrial areas, parking lots, play grounds and public parks using the appropriate pole height. One, two or more Consoles (Brackets/Arms) can be used depending on the type and width of roads or areas to be lightened. The Console innovative shapes and light fittings can be designed to provide delegate views and appropriate illumination.
Poles can also be used for traffic lights, flags and similar usage.
is a brand name under Ameeri Industries which is ISO 9001:2000 certified.
Design loads and calculations are based on BS EN 40 (BS 5469) meeting Dead loads, Wind Pressure etc.
�
Two types of cross-section available in AMGARD Lighting Poles
Tapered Octagonal Lighting PolesHeight(mtrs)) CatalogNo. No.ofPieces
3 AGO03 Single
4 AGO04 Single
5 AGO05 Single
6 AGO06 Single
8 AGO08 Single
10 AGO10 Single
12 AGO12 Single
14 AGO14 Double
16 AGO16 Double
18 AGO18 Double
20 AGO20 Double
Height(mtrs) CatalogNo. No.ofPieces
3 AGC03 Single
4 AGC04 Single
5 AGC05 Single
6 AGC06 Single
8 AGC08 Single
10 AGC10 Single
12 AGC12 Single
14 AGC14 Double
16 AGC16 Double
18 AGC18 Double
20 AGC20 Double
Conical Lighting Poles
www. amee r i . c om .bh
�
Number of Brackets/Arms and shapes can be
customized according to
customer’s requirements
Manufacturing Standards:
• BS EN 40 - 1:1992 Lighting columns. Definitions and terms.
• BS EN 40 - 2:2004 Lighting columns. General requirements and dimensions.
• BS EN 40 - 3-1: 2000 Lighting columns. Design and verification. Specification for characteristic loads.
• BS EN 40 - 3-2: 2000 Lighting columns. Design and verification. Verification by testing.
• BS EN 40 - 3-: 2003 Lighting columns. Design and verification. Verification by calculation.
• BS EN 40 - 5:2000 Lighting columns. Specification for steel lighting columns.
amga r d@amee r i . c om .bh
Double sections are used for above 1�m high poles which are attached together using socket type joint.
� www. amee r i . c om .bh
ROAD GUARD RAILS
Road Guard Rails are manufactured and Hot Dip Galvanized by meeting the International Standards and won approvals from Ministries, Leading Consultants and Clients and installed at many Projects.
is proud to be the part of many prestigious Projects and among these the following Projects are so popular where AMGARD Road Guard Rails are installed.
BAHRAIN FORMULA-1 (BAHRAIN INTERNATIONAL CIRCUIT) (AMGARD manufactured, supplied and also installed by Amgard team)
YAS MARINA CIRCUIT - FORMULA-1 at ABU DHABI, UAE (AMGARD manufactured & supplied)
DURRAT AL BAHRAIN HIGH WAY (King Hamad High Way) - Dual carriage way. (AMGARD manufactured, supplied and also installed by Amgard team)
‘W’ type ROAD GUARD RAILS (CRASH BARRIER)(Tensioned and Untensioned types)
�amga r d@amee r i . c om .bh
GUARD RAILSINSTALLED AT BAHRAIN FORMULA 1(BAHRAIN INTERNATIONAL CIRCUIT)
GUARD RAILSINSTALLED AT YAS MARINA CIRCUIT FORMULA 1AT ABU DHABI, UAE
GUARD RAILS
�
Guard Rails are manufactured through the advanced techniques of continuous forming procedure to have systematic bending. ‘W’ type corrugated guard rails are widely used type to reduce the danger and risk of human life on road accidents.
Superior quality and approved grade mild steel is used to manufacture these Guard Rails and accessories and undergoing hot dip Galvanizing process after fabrication which is also meeting the international standard.
GUARD RAILSINSTALLED AT DURRAT AL BAHRAINHIGHWAY
www. amee r i . c om .bh
GUARD RAIL
�
GUARD RAIL
amga r d@amee r i . c om .bh
High grade mild steel of required thickness used to manufacture AMGARD Open Box Beam
and its accessories through systematic bending
and hot dip Galvanized after fabrication according to international standards.
OPEN BOX BEAM
10
GUARD RAIL ACCESSORIES
TENSIONER BRACKETSAND BOLTS ASSEMBLY
UNTENSIONED SAFETY FENCEFOR MEDIAN
FLARE SHOE
STIFFNER
INTERMEDIATE POST
FISH TAIL - TYPE A
www. amee r i . c om .bh
11
PEDESTRIAN FENCE
manufactures different types of pedestrian
fencesaccording to the requirements
and according to required standards.
All Fences are hot dip Galvanized after fabrication. Finish coat of required
colour paint can be applied after galvanizing.
PEDESTRIAN FENCES ARE INSTALLED AT MANY LOCATIONS IN THE KINGDOM OF BAHRAIN
amga r d@amee r i . c om .bh
1�
TRAFFIC SIGNAL LIGHT BARRIERAND POST
www. amee r i . c om .bh
INDUSTRIAL VENT AND VENT GRILL
All Signal Light Barriers and Posts are hot dip Galvanized after fabrication. Finish coat of required colour paint applied after galvanizing.
All Vents and Grills are hot dip Galvanized after fabrication. Finish coat of required colour paint applied after galvanizing.
1�amga r d@amee r i . c om .bh
TRAY AND TRUNKING
Cable Tray SystemHigh Quality Cable Tray System
• Provides excellent cable management for power and network cables• Hot Dip Galvanized after fabrication• Manufactured with High quality grade Mild Steel• Can be installed in Indoor and Outdoor • Meeting High Technical and Environmental standards• Option:- available with Stainless Steel • Option :- if require with Powder Coating with suitable colours• Available as LIGHT, MEDIUM and HEAVY DUTY type for various cabling requirements.
• Provides excellent cable management for power and network cables• Manufactured from High quality galvanized Steel Sheet• Meeting High Technical and Environmental standards• Option:- available with Stainless Steel • Available as STANDARD and HEAVY DUTY type for various cabling requirements.
Cable Trunking SystemHigh Quality Cable Trunking System
1�
HOT DIP GALVANIZING PLANT
DOING HOT DIP GALVANIZINGWORKS FOR STEEL MATERIALS
• 12.5 mtr Long x 1.5 mtr wide x 2 mtr deep galvanizing kettle and• 6 mtr Long x 1.2 mtr wide x 2 mtr deep galvanizing kettle and• 12 mtr Long x 1.2 mtr wide x 2 mtr deep pickling (treatment) tanks.
www. amee r i . c om .bh
1�amga r d@amee r i . c om .bh
Continuous growth of AMEERI GROUP focused in another new direction towards Hot-Dip Galvanizing and constructed the new Galvanizing Plant at Askar, behind ALBA and it successfully started in July 2006.
The Galvanizing Plant constructed in 100 mtr long 20 mtr wide factory area dedicated for Hot Dip Galvanizing with six Pre-treatment Tanks of 12 mtr long x 1.5 mtr wide x 2.9 mtr deep, 1no. Cooling Tank of 12 mtr long x 1.5 mtr wide x 2.9 mtr deep and 1no. Passivation Tank (Di-chromate) of 12 mtr long x 1.5 mtr wide x 2.9 mtr deep.
TWIN HOT-DIP GALVANIZING KETTLE of 12.5 mtr long x 1.5 mtr wide x 2 mtr deep Size and 6 mtr Long x 1.2 mtr wide x 2 mtr deep size.
GALVANIZING PROCESS :The following process are carrying out for hot dip galvanizing in AMGARDGalvanizing Plant.
• DE GREASING
• Pickling with HCL ACID
• Rinsing
• Fluxing
• Drying
• Hot dip galvanizing
• Quenching (Cooling)
• Passivation (Di-chromate)
as option.
1� www. amee r i . c om .bh
Hot dip galvanizing is conforming the international standard of ASTM A123 or BS EN ISO 1461 (Old version BS729), which is essential for a good quality hot dip galvanized product.
Using zinc is to protect steel from corrosion.
Corrosion is caused by the inherent tendency of metals, when subjected to air and moisture, to revert to their original earthly forms, usually an ore state. They do this through a chemical or electrochemical reaction with the environment.
HOT DIP GALVANIZING is the BEST SOLUTION to PROTECT STEEL from CORROSION.Hot dip galvanizing has been in use for more than Hundred years and has proven to be the best method of corrosion protection for iron and steel.
The climatic conditions in the Gulf with its high humidity and salt contents make hot dip galvanizing a ideal solution for corrosion protection for iron and steel structures. This is even more important for KINGDOM OF BAHRAIN.
HOT DIP GALVANIZING PLANT
1�amga r d@amee r i . c om .bh
Cathodic protection is exactly what hot dip galvanizing provides to the steel that is coated with Zinc which increase the life and reduce its maintenance.
The hot dip galvanized coating uniquely provides both barrier and cathodic protection to the steel. Galvanizing protection is superior to other barrier coatings, such as fusion bonded epoxy (FBE), in the formation of a permanent bond with the steel. The molten zinc interlocks with the steel forming zinc-iron layers and creating a true metallurgical bond. Other barrier coatings rely on surface adhesion of the coating material to the steel.
Zinc has a higher electro-potential than steel. The zinc actually migrates to bare areas, such as scratches or drill holes to provide corrosion protection. The zinc protects the base steel from corrosion. The malleable outer zinc layer of the coating provides good impact resistance to the galvanized coating. The hardness of the zinc-iron alloy layer is actually greater than the base steel and provides exceptional resistance to coating damage due to handling.
Hot-dip galvanizing has a proven history of commercial success as a method of corrosion protection in myriad applications worldwide.
HOT DIP GALVANIZING PLANT
1�
AMEERI GROUP OF COMPANIES
AMEERI INDUSTRIES CO. W.L.L providing
- AMGARD brand products as stated in this catalogue
- AMETECH brand Switchgears
- AMELITE brand Light Fittings
AMEERI STORES - Offering all kinds of Electrical Materials and Engineering
AMEERI ELECTRICAL SERVICES - Grade :1 Electricity and Water Authority License holder to carry out unlimitted Electrical load installation works of HV and LV.
www. amee r i . c om .bh
SHOT BLASTING
4 Committed to grow and to extend best service to it’s Country, Kingdom of Bahrain and worldwide.
4 Meeting the latest international standards
4 Approved by Ministries , Consultants and Clients
4 Growing with day to day technology to offer the best to valuable customers
4 Performing well to provide high quality products based on international standards
4 Concerned about safety and Quality
1�amga r d@amee r i . c om .bh
is also manufacturing many custom made mechanical works like TELEPHONE TOWERS, STEEL PLATFORMS etc. and supplying & installing chain links tailoring to the requirement of customers
AMEERI INDUSTRIES is EN ISO 9001:2000 Certified Company( EN ISO 9001:2008 Certification is on Process )
P.O. Box : 657, Manama, Kingdom of Bahrain • Factory Tel: (+973) 17830800 • Fax: (+973) 17830811Head Office - Tel: (+973) 1745 6111 • Fax: (+973) 1745 6161
E-mail : [email protected] • Web : www.ameeri.com.bh
Manufacturer
Location Map
WHERE SAFETY AND QUALITY ARE CONCERN
AMG
/ GJE
/ 00
2/A
JAN.
201
1