AMERICAN PRODUCTS SERIES 2500 GLAZED ......AMERICAN PRODUCTS, INC. (API) PH (813)925-0144 TAMPA, FL...
Transcript of AMERICAN PRODUCTS SERIES 2500 GLAZED ......AMERICAN PRODUCTS, INC. (API) PH (813)925-0144 TAMPA, FL...
-
AMERICAN PRODUCTS SERIES 2500 GLAZED
COMMERCIAL DOOR WITH TRANSOM
LARGE MISSILE IMPACT RESISTANT (HVHZ)
FL #15937.1-R3
GENERAL NOTES
1. THE SYSTEM DESCRIBED HEREIN HAS BEEN DESIGNED AND TESTED IN ACCORDANCE WITH THE
FLORIDA BUILDING CODE FIFTH EDITION (2014), FOR USE WITHIN AND OUTSIDE THE HIGH VELOCITY
HURRICANE ZONE,
- TAS 201-94 PER REQUIREMENTS OF SECTION 1626 OF THE FLORIDA BUILDING CODE, BUILDING.
- TAS 202-94 PER REQUIREMENTS OF SECTION 1620 OF THE FLORIDA BUILDING CODE, BUILDING.
- TAS 203-94 PER REQUIREMENTS OF SECTION 1626 OF THE FLORIDA BUILDING CODE, BUILDING.
- ASTM E1300-09 STANDARDS FOR GLASS.
2. NO 33-1/3% INCREASE IN ALLOWABLE STRESS HAS BEEN USED IN THE DESIGN OF THIS SYSTEM.
WIND LOAD DURATION FACTOR Cd=1.6 HAS BEEN USED FOR WOOD ANCHOR DESIGN.
3. POSITIVE AND NEGATIVE DESIGN PRESSURES CALCULATED FOR USE WITH THIS SYSTEM SHALL
BE DETERMINED BY OTHERS ON A JOB-SPECIFIC BASIS IN ACCORDANCE WITH THE GOVERNING CODE.
SITE SPECIFIC LOAD WIND LOAD REQUIREMENTS SHALL BE DETERMINED IN ACCORDANCE WITH ASCE 7
AND THE FLORIDA BUILDING CODE FIFTH EDITION (2014) BY SEPARATE ENGINEERING CERTIFICATION
AND SHALL BE LESS THAN OR EQUAL TO THE POSITIVE OR NEGATIVE DESIGN PRESSURE CAPACITY
VALUE LISTED HEREIN FOR ANY ASSEMBLY WITHIN THE LIMITATIONS STATED HEREIN.
4. THE SYSTEM DETAILED HEREIN IS GENERIC AND DOES NOT PROVIDE INFORMATION FOR A
SPECIFIC SITE. FOR SITE CONDITIONS DIFFERENT FROM THE CONDITIONS DETAILED HEREIN, A
LICENSED ENGINEER OR REGISTERED ARCHITECT SHALL PREPARE SITE SPECIFIC DOCUMENTS FOR USE
IN CONJUNCTION WITH THIS DOCUMENT.
5. PERMIT HOLDER SHALL VERIFY THE ADEQUACY OF THE EXISTING STRUCTURE TO WITHSTAND
SUPERIMPOSED LOADS. WOOD BUCKS (BY OTHERS) SHALL BE ANCHORED PROPERLY TO TRANSFER
LOADS TO THE EXISTING STRUCTURE.
6. ANCHOR EMBEDMENT SPECIFIED IS INTO HOST STRUCTURE MINIMUM.
7. ALL EXTRUSIONS SHALL BE 6063-T5 ALUMINUM ALLOY, UNLESS NOTED OTHERWISE.
8. EXTERIOR SEAM OF FRAME CORNERS, INSTALLATION SCREWS, AND GLAZING BEAD ENDS SHALL
BE SEALED WITH SILICONE.
9. ALL BOLTS & WASHERS SHALL BE ZINC COATED STEEL, GALVANIZED STEEL, OR STAINLESS STEEL
WITH A MINIMUM TENSILE YIELD STRENGTH OF 60 KSI.
10. ALL DISSIMILAR MATERIALS SHALL BE PAINTED OR PLATED AS PRESCRIBED IN THE FLORIDA
BUILDING CODE.
11. GLAZING ILLUSTRATED HEREIN UTILIZES SENTRYGLAS INTERLAYER BY KURARAY AMERICA INC.
(NOA#14-0916.11), BUTACITE PVB INTERLAYER N.O.A.#13-0129.27
12. APPROVED FOR LARGE MISSILE IMPACT APPLICATIONS. SEE GLASS TYPES FOR ANY
RESTRICTIONS
13. TEST REPORTS: ARCHITECTURAL TESTING REPORTS # B8049.01-401-18, B8050.01-401-18 &
F7401.01-401-18
14. GLAZING GASKETS TESTED PER ASTM C-864 & C-509 FOR DENSE EPDM.
15. THIS SYSTEM MAY BE USED IN CONJUNCTION WITH AMERICAN PRODUCTS SERIES 2500 GLAZED
ALUMINUM COMMERCIAL STOREFRONT.
16. CODE REQUIREMENTS FOR SAFEGUARDS MUST BE OBSERVED AND ARE NOT IN THIS
CERTIFICATION.
17. DOOR TO SUBSTRATE WATERPROOFING IS NOT INCLUDED IN THIS DOCUMENT AND MUST BE
ADDRESSED AN A SITE SPECIFIC BASES. NOT AMERICAN PRODUCTS INC.
AutoCAD SHX TextCONTACT: KERRI BEALS
AutoCAD SHX Text12157 W. LINEBAUGH AVENUE #335
AutoCAD SHX TextAMERICAN PRODUCTS, INC. (API)
AutoCAD SHX TextPH (813)925-0144
AutoCAD SHX TextTAMPA, FL 33626
AutoCAD SHX TextWWW.AMERICANPROD.COM
AutoCAD SHX Textwith storefront elevations and section
AutoCAD SHX TextAPI Recommends that this note appear
AutoCAD SHX Textview details in your blueprints.
AutoCAD SHX TextAmerican Products, Inc. (API). No substitutions
AutoCAD SHX TextStorefront and related materials provided by
AutoCAD SHX Textwithout written consent from store owner/
AutoCAD SHX TextArchitect. API (813)925-0144
AutoCAD SHX TextCustomer:
AutoCAD SHX TextAssembly:
AutoCAD SHX TextScale:
AutoCAD SHX TextDrawn By:
AutoCAD SHX TextDate:
AutoCAD SHX TextSheet:
AutoCAD SHX TextRevision:
AutoCAD SHX TextDate:
AutoCAD SHX TextAPI IN-HOUSE
AutoCAD SHX TextF2500IR COMMERCIAL DOOR WITH TRANSOM
AutoCAD SHX TextN.T.S.
AutoCAD SHX Text06/17/2016
AutoCAD SHX Text1
-
D.L.O
.
FRAM
E H
EIG
HT
9"
9"
EQ
.EQ
.EQ
.
32" 32" 32"
96" M
AX D
OO
R O
PEN
IN
G H
EIG
HT
2 1/2"
2 1/2" 2 1/2"
2 1/2"
1 1/8"
C
L
(W1 WIDTH)
C
L
C
L
(W2 WIDTH) (W1 WIDTH)
C
L
1 1/8"
DOOR WIDTH
60" MAX
D.L.O.
FRAME WIDTH
(W1 WIDTH) 98 1/2" MAX (W2 WIDTH) (W1 WIDTH)
96" MAX D.L.O.
60" MAX
D.L.O.
FINISHED OPENING
1 1/8" 1 1/8"
3/8" 3/8"
C
L
C
L
C
L
C
L
96" MAX. DOOR OPENING WIDTH
1/8"
37 7/8" MAX.
D.L.O. WIDTH
82 3/4" M
AX. D
.L.O
.
HEIG
HT
95 1/2" M
AX D
OO
R PAN
EL H
EIG
HT
1/8"
3/8"
37 7/8" MAX.
D.L.O. WIDTH
1/8"
1/4"
BUTT HINGE: 47.843" MAX.
DOOR PANEL WIDTH OR
C.G.H: 47.6875" MAX.
DOOR PANEL WIDTH
BUTT HINGE: 47.843" MAX.
DOOR PANEL WIDTH OR
C.G.H: 47.6875" MAX.
DOOR PANEL WIDTH
ANCHORS AT MEETING STILE (HEAD/SILL):
(2) REQD. FOR METAL INST.
(4) REQD. FOR CONCRETE INST. (
5
16
" ANCHORS)
(6) REQD. FOR CONCRETE INST. (
1
4
" ANCHORS)
(6) REQD. FOR WOOD INST.
1
1
2
"
4
1
2
"
3"
3"
3"
3"
1
1
2
"
3"
3"
3"
12" MAX
SILL
SEE SEPARATE APPROVAL
FOR STOREFRONT
AutoCAD SHX TextA
AutoCAD SHX TextA
AutoCAD SHX TextA
AutoCAD SHX TextF
AutoCAD SHX Text7
AutoCAD SHX Text1
AutoCAD SHX Text10
AutoCAD SHX Text3
AutoCAD SHX Text10
AutoCAD SHX Text2
AutoCAD SHX Text10
AutoCAD SHX Text1
AutoCAD SHX Text7
AutoCAD SHX Text2C
AutoCAD SHX Text2510/2546
AutoCAD SHX Text2564/2582/2511
AutoCAD SHX Text2521/2525/2582
AutoCAD SHX Text2564/2582/2511
AutoCAD SHX Text1203
AutoCAD SHX Text1213
AutoCAD SHX Text1215
AutoCAD SHX Text1215
AutoCAD SHX Text1203
AutoCAD SHX Text1213
AutoCAD SHX Text10
AutoCAD SHX Text3
AutoCAD SHX Text4 BUTT HINGES OR CONT. GEARED HINGE
AutoCAD SHX TextCONT. GEARED HINGE OR 4 BUTT HINGES
AutoCAD SHX Text1217
AutoCAD SHX Text1216
AutoCAD SHX Text7
AutoCAD SHX Text1A
AutoCAD SHX Text7
AutoCAD SHX Text1B
AutoCAD SHX Text10
AutoCAD SHX Text4
AutoCAD SHX Text7
AutoCAD SHX Text2C
AutoCAD SHX TextAPI-1215
AutoCAD SHX TextAPI-1215
AutoCAD SHX TextG
AutoCAD SHX TextF
AutoCAD SHX TextG
AutoCAD SHX TextOPTIONAL PANIC DEVICE
AutoCAD SHX TextCONTACT: KERRI BEALS
AutoCAD SHX Text12157 W. LINEBAUGH AVENUE #335
AutoCAD SHX TextAMERICAN PRODUCTS, INC. (API)
AutoCAD SHX TextPH (813)925-0144
AutoCAD SHX TextTAMPA, FL 33626
AutoCAD SHX TextWWW.AMERICANPROD.COM
AutoCAD SHX Textwith storefront elevations and section
AutoCAD SHX TextAPI Recommends that this note appear
AutoCAD SHX Textview details in your blueprints.
AutoCAD SHX TextAmerican Products, Inc. (API). No substitutions
AutoCAD SHX TextStorefront and related materials provided by
AutoCAD SHX Textwithout written consent from store owner/
AutoCAD SHX TextArchitect. API (813)925-0144
AutoCAD SHX TextCustomer:
AutoCAD SHX TextAssembly:
AutoCAD SHX TextScale:
AutoCAD SHX TextDrawn By:
AutoCAD SHX TextDate:
AutoCAD SHX TextSheet:
AutoCAD SHX TextRevision:
AutoCAD SHX TextDate:
AutoCAD SHX TextAPI IN-HOUSE
AutoCAD SHX TextF2500IR COMMERCIAL DOOR WITH TRANSOM
AutoCAD SHX TextN.T.S.
AutoCAD SHX Text06/17/2016
AutoCAD SHX Text2
-
D.L.O
.
96" MAX D.L.O.
101" MAX FRAME WIDTH
FRAM
E H
EIG
HT
9"
9"
EQ
.EQ
.EQ
.
1/3 rd 1/3 rd 1/3 rd
96" M
AX D
OO
R H
EIG
HT O
PEN
IN
G
FRAM
E H
EIG
HT
9"
9"
EQ
.EQ
.EQ
.
101" MAX FRAME WIDTH
1/3 rd 1/3 rd 1/3 rd
96" M
AX D
OO
R O
PEN
IN
G H
EIG
HT
1/4" 1/4"
1/4"1/4"
37 7/8" MAX.
D.L.O. WIDTH
82 3/4" M
AX. D
.L.O
.
HEIG
HT
37 7/8" MAX.
D.L.O. WIDTH
37 7/8" MAX.
D.L.O. WIDTH
82 3/4" M
AX. D
.L.O
.
HEIG
HT
37 7/8" MAX.
D.L.O. WIDTH
1/4"
1/4"
ANCHORS AT MEETING STILE (HEAD/SILL):
(2) REQD. FOR METAL INST.
(4) REQD. FOR CONCRETE INST. (
5
16
" ANCHORS)
(6) REQD. FOR CONCRETE INST. (
1
4
" ANCHORS)
(6) REQD. FOR WOOD INST.
1
1
2
"
4
1
2
"
3"
3"
3"
3"
12" MAX
SILL
1
1
2
"
3"
3"
3"
ANCHORS AT MEETING STILE (HEAD/SILL):
(2) REQD. FOR METAL INST.
(4) REQD. FOR CONCRETE INST. (
5
16
" ANCHORS)
(6) REQD. FOR CONCRETE INST. (
1
4
" ANCHORS)
(6) REQD. FOR WOOD INST.
1
1
2
"
4
1
2
"
3"
3"
3"
3"
12" MAX
SILL
1
1
2
"
3"
3"
3"
2"
3"
4"
3"
5"
12"M
AX
IN
TO
CO
NC.
& M
ETAL
8" M
AX.
IN
TO
WO
OD
5"
12" M
AX
IN
TO
CO
NC.
& M
ETAL
8" M
AX.
IN
TO
WO
OD
5"
95 1/2" M
AX D
OO
R PAN
EL H
EIG
HT
1/8"
3/8"
95 1/2" M
AX D
OO
R PAN
EL H
EIG
HT
1/8"
3/8"
96" MAX. DOOR OPENING WIDTH
1/8"1/8"
BUTT HINGE: 47.843" MAX.
DOOR PANEL WIDTH OR
C.G.H: 47.6875" MAX.
DOOR PANEL WIDTH
BUTT HINGE: 47.843" MAX.
DOOR PANEL WIDTH OR
C.G.H: 47.6875" MAX.
DOOR PANEL WIDTH
96" MAX. DOOR OPENING WIDTH
1/8"1/8"
BUTT HINGE: 47.843" MAX.
DOOR PANEL WIDTH OR
C.G.H: 47.6875" MAX.
DOOR PANEL WIDTH
BUTT HINGE: 47.843" MAX.
DOOR PANEL WIDTH OR
C.G.H: 47.6875" MAX.
DOOR PANEL WIDTH
AutoCAD SHX TextA
AutoCAD SHX TextF
AutoCAD SHX TextF
AutoCAD SHX Text2510/2546
AutoCAD SHX Text2564/2546/2582
AutoCAD SHX Text2521/2525/2582
AutoCAD SHX Text1203
AutoCAD SHX Text1213
AutoCAD SHX Text1215
AutoCAD SHX Text1215
AutoCAD SHX Text1203
AutoCAD SHX Text1213
AutoCAD SHX Text4 BUTT HINGES OR CONT. GEARED HINGE
AutoCAD SHX Text1217
AutoCAD SHX Text1216
AutoCAD SHX TextF
AutoCAD SHX Text8
AutoCAD SHX Text1
AutoCAD SHX Text2563/2546
AutoCAD SHX Text2563/2545
AutoCAD SHX Text2563/2546
AutoCAD SHX Text1203
AutoCAD SHX Text1213
AutoCAD SHX Text1215
AutoCAD SHX Text1215
AutoCAD SHX Text1203
AutoCAD SHX Text1213
AutoCAD SHX Text4 BUTT HINGES OR CONT. GEARED HINGE
AutoCAD SHX Text1217
AutoCAD SHX Text1216
AutoCAD SHX Text2564/2546/2582
AutoCAD SHX Text7
AutoCAD SHX Text2
AutoCAD SHX Text10
AutoCAD SHX Text1
AutoCAD SHX Text9
AutoCAD SHX Text2
AutoCAD SHX Text10
AutoCAD SHX Text4
AutoCAD SHX Text10
AutoCAD SHX Text2
AutoCAD SHX Text13
AutoCAD SHX Text4
AutoCAD SHX Text10
AutoCAD SHX Text2
AutoCAD SHX Text7
AutoCAD SHX Text1
AutoCAD SHX Text7
AutoCAD SHX Text1A
AutoCAD SHX Text7
AutoCAD SHX Text1B
AutoCAD SHX Text8
AutoCAD SHX Text1A
AutoCAD SHX Text8
AutoCAD SHX Text1B
AutoCAD SHX Text9
AutoCAD SHX Text2A
AutoCAD SHX Text9
AutoCAD SHX Text2B
AutoCAD SHX Text9
AutoCAD SHX Text1
AutoCAD SHX Text9
AutoCAD SHX Text1A
AutoCAD SHX Text9
AutoCAD SHX Text1B
AutoCAD SHX Text7
AutoCAD SHX Text2A
AutoCAD SHX Text7
AutoCAD SHX Text2B
AutoCAD SHX TextG
AutoCAD SHX TextG
AutoCAD SHX TextCONT. GEARED HINGE OR 4 BUTT HINGES
AutoCAD SHX TextCONT. GEARED HINGE OR 4 BUTT HINGES
AutoCAD SHX TextF
AutoCAD SHX TextG
AutoCAD SHX TextG
AutoCAD SHX TextOPTIONAL PANIC DEVICE
AutoCAD SHX TextOPTIONAL PANIC DEVICE
AutoCAD SHX TextCONTACT: KERRI BEALS
AutoCAD SHX Text12157 W. LINEBAUGH AVENUE #335
AutoCAD SHX TextAMERICAN PRODUCTS, INC. (API)
AutoCAD SHX TextPH (813)925-0144
AutoCAD SHX TextTAMPA, FL 33626
AutoCAD SHX TextWWW.AMERICANPROD.COM
AutoCAD SHX Textwith storefront elevations and section
AutoCAD SHX TextAPI Recommends that this note appear
AutoCAD SHX Textview details in your blueprints.
AutoCAD SHX TextAmerican Products, Inc. (API). No substitutions
AutoCAD SHX TextStorefront and related materials provided by
AutoCAD SHX Textwithout written consent from store owner/
AutoCAD SHX TextArchitect. API (813)925-0144
AutoCAD SHX TextCustomer:
AutoCAD SHX TextAssembly:
AutoCAD SHX TextScale:
AutoCAD SHX TextDrawn By:
AutoCAD SHX TextDate:
AutoCAD SHX TextSheet:
AutoCAD SHX TextRevision:
AutoCAD SHX TextDate:
AutoCAD SHX TextAPI IN-HOUSE
AutoCAD SHX TextF2500IR COMMERCIAL DOOR WITH TRANSOM
AutoCAD SHX TextN.T.S.
AutoCAD SHX Text06/17/2016
AutoCAD SHX Text3
-
D.L.O
.
48" MAX
D.L.O.
53" MAX FRAME WIDTH
FRAM
E H
EIG
HT
9"
9"
EQ
.EQ
.EQ
.
FRAM
E H
EIG
HT
9"
9"
EQ
.EQ
.EQ
.
96" D
OO
R H
EIG
HT O
PEN
IN
G
DO
OR H
EIG
HT
48" MAX
DOOR OPENING WIDTH
1/8"
37 7/8" MAX.
D.L.O. WIDTH
82 3/4" M
AX. D
.L.O
.
HEIG
HT
1/8"
1/4"
1/4"1/4"
1/4"
37 7/8" MAX.
D.L.O. WIDTH
82 3/4" M
AX. D
.L.O
.
HEIG
HT
1
1
2
"
3"
3"
3"
12" MAX
SILL
1
1
2
"
4
1
2
"
1
1
2
"
3"
3"
3"
12" MAX
SILL
1
1
2
"
4
1
2
"
2"
3"
4"
3"
5"
12"M
AX
IN
TO
CO
NC.
& M
ETAL
8" M
AX.
IN
TO
WO
OD
5"
12"M
AX
IN
TO
CO
NC.
& M
ETAL
8" M
AX.
IN
TO
WO
OD
5"
48" MAX
D.L.O.
53" MAX FRAME WIDTH
1/4"1/4"
95 1/2" M
AX D
OO
R PAN
EL H
EIG
HT
1/8"
3/8"
95 1/2" M
AX D
OO
R PAN
EL H
EIG
HT
1/8"
3/8"
BUTT HINGE: 47.843" MAX.
DOOR PANEL WIDTH OR
C.G.H: 47.6875" MAX.
DOOR PANEL WIDTH
48" MAX
DOOR OPENING WIDTH
1/8"1/8"
BUTT HINGE: 47.843" MAX.
DOOR PANEL WIDTH OR
C.G.H: 47.6875" MAX.
DOOR PANEL WIDTH
AutoCAD SHX TextA
AutoCAD SHX TextG
AutoCAD SHX Text2510/2546
AutoCAD SHX Text2564/2582/2511
AutoCAD SHX Text2521/2525/2582
AutoCAD SHX Text2564/2582/2511
AutoCAD SHX Text1215
AutoCAD SHX Text1203
AutoCAD SHX Text1213
AutoCAD SHX Text4 BUTT HINGES OR CONT. GEARED HINGE
AutoCAD SHX Text1217
AutoCAD SHX TextG
AutoCAD SHX Text2564/2582/2511
AutoCAD SHX Text2563/2546
AutoCAD SHX Text2564/2582/2511
AutoCAD SHX Text1215
AutoCAD SHX Text1203
AutoCAD SHX Text1213
AutoCAD SHX Text4 BUTT HINGES OR CONT. GEARED HINGE
AutoCAD SHX Text1217
AutoCAD SHX Text10
AutoCAD SHX Text1
AutoCAD SHX Text10
AutoCAD SHX Text2
AutoCAD SHX Text10
AutoCAD SHX Text2
AutoCAD SHX Text7
AutoCAD SHX Text1
AutoCAD SHX Text7
AutoCAD SHX Text1A
AutoCAD SHX Text7
AutoCAD SHX Text1B
AutoCAD SHX Text8
AutoCAD SHX Text1
AutoCAD SHX Text8
AutoCAD SHX Text1A
AutoCAD SHX Text8
AutoCAD SHX Text1B
AutoCAD SHX Text9
AutoCAD SHX Text2
AutoCAD SHX Text9
AutoCAD SHX Text2A
AutoCAD SHX Text9
AutoCAD SHX Text2B
AutoCAD SHX Text9
AutoCAD SHX Text1
AutoCAD SHX Text9
AutoCAD SHX Text1A
AutoCAD SHX Text9
AutoCAD SHX Text1B
AutoCAD SHX Text7
AutoCAD SHX Text2A
AutoCAD SHX Text7
AutoCAD SHX Text2B
AutoCAD SHX Text7
AutoCAD SHX Text2
AutoCAD SHX TextOPTIONAL PANIC DEVICE
AutoCAD SHX TextOPTIONAL PANIC DEVICE
AutoCAD SHX TextCONTACT: KERRI BEALS
AutoCAD SHX Text12157 W. LINEBAUGH AVENUE #335
AutoCAD SHX TextAMERICAN PRODUCTS, INC. (API)
AutoCAD SHX TextPH (813)925-0144
AutoCAD SHX TextTAMPA, FL 33626
AutoCAD SHX TextWWW.AMERICANPROD.COM
AutoCAD SHX Textwith storefront elevations and section
AutoCAD SHX TextAPI Recommends that this note appear
AutoCAD SHX Textview details in your blueprints.
AutoCAD SHX TextAmerican Products, Inc. (API). No substitutions
AutoCAD SHX TextStorefront and related materials provided by
AutoCAD SHX Textwithout written consent from store owner/
AutoCAD SHX TextArchitect. API (813)925-0144
AutoCAD SHX TextCustomer:
AutoCAD SHX TextAssembly:
AutoCAD SHX TextScale:
AutoCAD SHX TextDrawn By:
AutoCAD SHX TextDate:
AutoCAD SHX TextSheet:
AutoCAD SHX TextRevision:
AutoCAD SHX TextDate:
AutoCAD SHX TextAPI IN-HOUSE
AutoCAD SHX TextF2500IR COMMERCIAL DOOR WITH TRANSOM
AutoCAD SHX TextN.T.S.
AutoCAD SHX Text06/17/2016
AutoCAD SHX Text4
-
9"
9"
EQ
.EQ
.EQ
.
96" M
AX D
OO
R H
EIG
HT
D.L.O
.
FRAM
E H
EIG
HT
DO
OR H
EIG
HT
60" MAX
D.L.O.
FRAME WIDTH
(W1 WIDTH) 50 1/2" MAX (W2 WIDTH) (W1 WIDTH)
48" MAX D.L.O.
60" MAX
D.L.O.
FINISHED OPENING
1 1/8" 1 1/8"
3/8" 3/8"
C
L
C
L
C
L
C
L
48" MAX
DOOR OPENING WIDTH
1
1
2
"
3"
3"
3"
12" MAX
SILL
1
1
2
"
4
1
2
"
95 1/2" M
AX D
OO
R PAN
EL H
EIG
HT
1/8"
3/8"
SEE SEPARATE APPROVAL
FOR STOREFRONT
TYPE 'A'
DIRECTLY INTO CONCRETE (3513 PSI MIN)
5/16" DIA. ULTRACON BY 'ELCO' (Fu=177 KSI, Fy=155 KSI)
1-3/4" MIN. EMBED INTO CONCRETE
TYPE 'B'
INTO 2BY WOOD BUCKS OR WOOD STRUCTURES (SYP#2
G=0.55 MIN)
1/4" DIA. ULTRACON BY 'ELCO' (Fu=177 KSI, Fy=155 KSI)
1-1/2" MIN. PENETRATION INTO WOOD
TYPE 'C'
DIRECTLY INTO CONCRETE (2846 PSI MIN)
1/4" DIA. ULTRACON BY 'ELCO' (Fu=177 KSI, Fy=155 KSI)
1-3/4" MIN. EMBED INTO CONCRETE
TYPE 'D'
INTO METAL STRUCTURES (3 PICHES PASS THE THREAD
PLANE MIN.)
STEEL: 18-18 GAGE STEEL MIN (Fy=36 KSI MIN)
ALUMINUM: 1/8" THK MIN. (6063-T5 MIN)
1/4-20 DIA. DRIL-FLEX BY 'ELCO' (GRADE 5 MIN)
(STEEL IN CONTACT WITH ALUMINUM TO BE PLATED OR
PAINTED)
TYPICAL EDGE DISTANCE
INTO CONCRETE =
1
4
" ANCHORS USE 2
1
2
" MIN.
5
16
" ANCHORS USE 3" MIN.
INTO WOOD STRUCTURE = 1" MIN.
INTO METAL STRUCTURE = 1" MIN.
CO
NCRETE
CO
NCRETE
METAL
WO
OD
TYPICAL ANCHORS:
ANCHOR SPACING LAYOUT
AutoCAD SHX TextA
AutoCAD SHX TextA
AutoCAD SHX TextA
AutoCAD SHX TextG
AutoCAD SHX Text10
AutoCAD SHX Text3
AutoCAD SHX Text10
AutoCAD SHX Text2
AutoCAD SHX Text10
AutoCAD SHX Text1
AutoCAD SHX Text7
AutoCAD SHX Text2C
AutoCAD SHX Text2510/2546
AutoCAD SHX Text2564/2582/2511
AutoCAD SHX Text2521/2525/2582
AutoCAD SHX Text2564/2582/2511
AutoCAD SHX Text1215
AutoCAD SHX Text1203
AutoCAD SHX Text1213
AutoCAD SHX Text10
AutoCAD SHX Text3
AutoCAD SHX Text4 BUTT HINGES OR CONT. GEARED HINGE
AutoCAD SHX Text1217
AutoCAD SHX Text7
AutoCAD SHX Text1
AutoCAD SHX Text7
AutoCAD SHX Text1A
AutoCAD SHX Text7
AutoCAD SHX Text1B
AutoCAD SHX TextOPTIONAL PANIC DEVICE
AutoCAD SHX TextCONTACT: KERRI BEALS
AutoCAD SHX Text12157 W. LINEBAUGH AVENUE #335
AutoCAD SHX TextAMERICAN PRODUCTS, INC. (API)
AutoCAD SHX TextPH (813)925-0144
AutoCAD SHX TextTAMPA, FL 33626
AutoCAD SHX TextWWW.AMERICANPROD.COM
AutoCAD SHX Textwith storefront elevations and section
AutoCAD SHX TextAPI Recommends that this note appear
AutoCAD SHX Textview details in your blueprints.
AutoCAD SHX TextAmerican Products, Inc. (API). No substitutions
AutoCAD SHX TextStorefront and related materials provided by
AutoCAD SHX Textwithout written consent from store owner/
AutoCAD SHX TextArchitect. API (813)925-0144
AutoCAD SHX TextCustomer:
AutoCAD SHX TextAssembly:
AutoCAD SHX TextScale:
AutoCAD SHX TextDrawn By:
AutoCAD SHX TextDate:
AutoCAD SHX TextSheet:
AutoCAD SHX TextRevision:
AutoCAD SHX TextDate:
AutoCAD SHX TextAPI IN-HOUSE
AutoCAD SHX TextF2500IR COMMERCIAL DOOR WITH TRANSOM
AutoCAD SHX TextN.T.S.
AutoCAD SHX Text06/17/2016
AutoCAD SHX Text5
-
DOOR GLASS TYPES
16
15
TRANSOM GLASS TYPE
DRY GLAZED
1/4" H.S.
.090 PVB
1/4" H.S.1/4" H.S.
.090 SGP BY
KURARAY
1/4" H.S.
13
12
30
16
17
26
13
12
30
16
17
26
3/4"
GLASS
BITE
3/4"
GLASS
BITE
EXTERIO
R
IN
TERIO
R
EXTERIO
R
IN
TERIO
R
1/4" TEMPERED
1/2" AIR GAP
1/4" H.S.
.090 SGP BY KURARAY
1/4" H.S.
9/16"
GLASS
BITE
(TYP.)
EXTERIO
R
IN
TERIO
R
GLASS TYPE "A"
GLASS TYPE "F" GLASS TYPE "G"
WIDTH (W)
H1
H2
WIDTH (W)
H1
H2
SINGLE DOOR HORIZONTAL (OX) WITH TRANSOM
OPENG.
WIDTH
DOOR
HEIGHT (H1)
TRANSOM
HEIGHT (H2)
30" TO 48"
POSITIVE AND NEGATIVE
DESIGN PRESSURES
SINGLE DOOR
80" TO 96" 24" TO 46"
60.0 psf
* ALUMINUM REINFORCEMENT
REQUIRED AT HORIZONTAL MULLIONS.
SEE DETAIL 1A/10
DOUBLE DOOR HORIZONTAL (O / XX) WITH TRANSOM
OPENG.
WIDTH
DOOR
HEIGHT (H1)
TRANSOM
HEIGHT (H2)
60"
80"
24"
30"
36"
40"
72"
78"
84"
90"
96"
24"
30"
36"
40"
24"
30"
36"
40"
24"
30"
36"
40"
24"
30"
36"
40"
24"
30"
36"
40"
60"
84"
24"
30"
36"
72"
78"
84"
90"
96"
24"
30"
36"
24"
30"
36"
24"
30"
36"
24"
30"
36"
24"
30"
36"
POSITIVE AND NEGATIVE
DESIGN PRESSURES
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
DOUBLE DOOR
*
*
*
*
*
*
*
*
*
46"
60.0 psf
46"
60.0 psf
*
46"
*
60.0 psf
46"
60.0 psf
46"
60.0 psf
40"55.0 psf
*
42"60.0 psf
*
42"
60.0 psf
*
42"60.0 psf
42"60.0 psf
42"60.0 psf
126" M
AX
60"
90"
24"
36"
72"
78"
84"
90"
96"
24"
30"
24"
30"
24"
30"
24"
30"
24"
30"
60"
96"
24"
72"
78"
84"
90"
96"
24"
24"
24"
24"
24"
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
60.0 psf
55.0 psf
*
36" 55.0 psf
*
36"60.0 psf
*
36"
60.0 psf
36"
60.0 psf
36"60.0 psf
30"60.0 psf
30"
60.0 psf
*
30"
60.0 psf
30"
60.0 psf
30"
60.0 psf
30"
60.0 psf
30"
60.0 psf
DOUBLE DOOR HORIZONTAL (O / XX) WITH TRANSOM
OPENG.
WIDTH
DOOR
HEIGHT (H1)
TRANSOM
HEIGHT (H2)
POSITIVE AND NEGATIVE
DESIGN PRESSURES
DOUBLE DOOR
NOTE:
GLASS CAPACITY ON THIS SHEET IS BASED ON ASTM E1300-09
(3 SEC GUST)
THE PERIMETER SEAL SYSTEM FOR THE INSULATED GLASS WAS
COMPRISED OF ALUMINUM REINFORCED BUTYL AIR SPACER.
AutoCAD SHX TextCONTACT: KERRI BEALS
AutoCAD SHX Text12157 W. LINEBAUGH AVENUE #335
AutoCAD SHX TextAMERICAN PRODUCTS, INC. (API)
AutoCAD SHX TextPH (813)925-0144
AutoCAD SHX TextTAMPA, FL 33626
AutoCAD SHX TextWWW.AMERICANPROD.COM
AutoCAD SHX Textwith storefront elevations and section
AutoCAD SHX TextAPI Recommends that this note appear
AutoCAD SHX Textview details in your blueprints.
AutoCAD SHX TextAmerican Products, Inc. (API). No substitutions
AutoCAD SHX TextStorefront and related materials provided by
AutoCAD SHX Textwithout written consent from store owner/
AutoCAD SHX TextArchitect. API (813)925-0144
AutoCAD SHX TextCustomer:
AutoCAD SHX TextAssembly:
AutoCAD SHX TextScale:
AutoCAD SHX TextDrawn By:
AutoCAD SHX TextDate:
AutoCAD SHX TextSheet:
AutoCAD SHX TextRevision:
AutoCAD SHX TextDate:
AutoCAD SHX TextAPI IN-HOUSE
AutoCAD SHX TextF2500IR COMMERCIAL DOOR WITH TRANSOM
AutoCAD SHX TextN.T.S.
AutoCAD SHX Text06/17/2016
AutoCAD SHX Text6
-
16
15
21
7
15
2 1/2"
EXISTING HOST
STRUCTURE
1/4"
2 1/2"
18
7
16
15
9/16"
GLASS
BITE
(TYP.)
9/16"
GLASS
BITE
(TYP.)
9/16"
GLASS
BITE
(TYP.)
JAMB DETAIL
7
2
6" = 1'-0"
INTERMEDIATE DETAIL
7
2C
VERTICAL
HEAD DETAIL
7
1B
INTO METAL STRUCTURES
HEAD DETAIL
7
1A
6
18
15
2 1/2"
9/16"
GLASS
BITE
(TYP.)
16
6
18
15
2 1/2"
9/16"
GLASS
BITE
(TYP.)
16
6" = 1'-0"
INTO WOOD STRUCTURES
6" = 1'-0"
6
18
15
2 1/2"
1/4"
MAX.
HEAD DETAIL
7
1
9/16"
GLASS
BITE
(TYP.)
16
INTO CONCRETE
6" = 1'-0"
NOTE:
ANCHORS PER ANCHOR SCHEDULE ON SHEET 5. SEE
TYPICAL ELEVATION ON SHEETS 2 THROUGH 5 FOR SPACING
16
INTO CONCRETE
6" = 1'-0"
1/4"
2 1/2"
18
16
15
9/16"
GLASS
BITE
(TYP.)
JAMB DETAIL
7
2A
INTO METAL STRUCTURES
6" = 1'-0"
1/4"
2 1/2"
18
16
15
9/16"
GLASS
BITE
(TYP.)
JAMB DETAIL
7
2B
INTO WOOD
6" = 1'-0"
1/4"
MAX.
1/4"
MAX.
28
EXTERIOR INTERIOR EXTERIOR INTERIOR EXTERIOR INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
PERIMETER SEALANT BY
INSTALLER OR OTHERS.
TYPICAL AT INTERIOR
PERIMETER
SEALANT BY
INSTALLER
PERIMETER
SEALANT BY
OTHERS
PERIMETER SEALANT BY
INSTALLER OR OTHERS.
TYPICAL AT INTERIOR
PERIMETER
SEALANT BY
INSTALLER
PERIMETER
SEALANT BY
INSTALLER OR
OTHERS.
TYPICAL AT
INTERIOR
PERIMETER
SEALANT BY
INSTALLER
PERIMETER SEALANT BY
INSTALLER OR OTHERS.
TYPICAL AT INTERIOR
PERIMETER SEALANT BY
INSTALLER OR OTHERS.
TYPICAL AT INTERIOR
PERIMETER
SEALANT BY
INSTALLER
PERIMETER
SEALANT BY
INSTALLER
7AOR
7 7AOR
7 7AOR
7AOR
PERIMETER SEALANT BY
INSTALLER OR OTHERS.
TYPICAL AT INTERIOR
AutoCAD SHX TextCONTACT: KERRI BEALS
AutoCAD SHX Text12157 W. LINEBAUGH AVENUE #335
AutoCAD SHX TextAMERICAN PRODUCTS, INC. (API)
AutoCAD SHX TextPH (813)925-0144
AutoCAD SHX TextTAMPA, FL 33626
AutoCAD SHX TextWWW.AMERICANPROD.COM
AutoCAD SHX Textwith storefront elevations and section
AutoCAD SHX TextAPI Recommends that this note appear
AutoCAD SHX Textview details in your blueprints.
AutoCAD SHX TextAmerican Products, Inc. (API). No substitutions
AutoCAD SHX TextStorefront and related materials provided by
AutoCAD SHX Textwithout written consent from store owner/
AutoCAD SHX TextArchitect. API (813)925-0144
AutoCAD SHX TextCustomer:
AutoCAD SHX TextAssembly:
AutoCAD SHX TextScale:
AutoCAD SHX TextDrawn By:
AutoCAD SHX TextDate:
AutoCAD SHX TextSheet:
AutoCAD SHX TextRevision:
AutoCAD SHX TextDate:
AutoCAD SHX TextAPI IN-HOUSE
AutoCAD SHX TextF2500IR COMMERCIAL DOOR WITH TRANSOM
AutoCAD SHX TextN.T.S.
AutoCAD SHX Text06/17/2016
AutoCAD SHX Text7
-
18
25
1
13
12
30
16
17
1/4"
HEAD DETAIL
8
1
INTO CONCRETE
6" = 1'-0"
18
25
1
13
12
30
16
17
1/4"
HEAD DETAIL
8
1A
INTO METAL STRUCTURES
6" = 1'-0"
18
25
1
13
12
30
16
17
1/4"
HEAD DETAIL
8
1B
INTO WOOD STRUCTURES
6" = 1'-0"
2 1/2"
1/8"
3 1/2"
1 1/8"
DLO
.
2 1/2"
1/8"
3 1/2"
1 1/8"
DLO
.
2 1/2"
1/8"
3 1/2"
1 1/8"
DLO
.
3/4"
GLASS
BITE
(TYP)
3/4"
GLASS
BITE
(TYP)
3/4"
GLASS
BITE
(TYP)
363636
EXTERIO
R
EXTERIO
R
EXTERIO
R
PERIMETER
SEALANT BY
INSTALLER
PERIMETER
SEALANT BY
INSTALLER
PERIMETER
SEALANT BY
INSTALLER
PERIMETER
SEALANT BY
INSTALLER
PERIMETER
SEALANT BY
INSTALLER
PERIMETER
SEALANT BY
INSTALLER
NOTE:
ANCHORS PER ANCHOR SCHEDULE ON SHEET 5. SEE
TYPICAL ELEVATION ON SHEETS 2 THROUGH 5 FOR SPACING
AutoCAD SHX TextCONTACT: KERRI BEALS
AutoCAD SHX Text12157 W. LINEBAUGH AVENUE #335
AutoCAD SHX TextAMERICAN PRODUCTS, INC. (API)
AutoCAD SHX TextPH (813)925-0144
AutoCAD SHX TextTAMPA, FL 33626
AutoCAD SHX TextWWW.AMERICANPROD.COM
AutoCAD SHX Textwith storefront elevations and section
AutoCAD SHX TextAPI Recommends that this note appear
AutoCAD SHX Textview details in your blueprints.
AutoCAD SHX TextAmerican Products, Inc. (API). No substitutions
AutoCAD SHX TextStorefront and related materials provided by
AutoCAD SHX Textwithout written consent from store owner/
AutoCAD SHX TextArchitect. API (813)925-0144
AutoCAD SHX TextCustomer:
AutoCAD SHX TextAssembly:
AutoCAD SHX TextScale:
AutoCAD SHX TextDrawn By:
AutoCAD SHX TextDate:
AutoCAD SHX TextSheet:
AutoCAD SHX TextRevision:
AutoCAD SHX TextDate:
AutoCAD SHX TextAPI IN-HOUSE
AutoCAD SHX TextF2500IR COMMERCIAL DOOR WITH TRANSOM
AutoCAD SHX TextN.T.S.
AutoCAD SHX Text06/17/2016
AutoCAD SHX Text8
-
1/4"
18
13
12
30
16
17
7
10
1/4"
18
13
12
30
16
17
EXISTING HOST
STRUCTURE
25
4
BUTT HINGE
OR CONTINUOUS GEAR
DOOR JAMB DETAIL
9
2
DOOR JAMB DETAIL
9
1
INTO CONCRETE
6" = 1'-0"
1/4"
18
13
12
30
16
17
DOOR JAMB DETAIL
9
1A
INTO METAL STRUCTURES
6" = 1'-0"
1/4"
18
13
12
30
16
17
DOOR JAMB DETAIL
9
1B
INTO WOOD STRUCTURES
6" = 1'-0"
INTO CONCRETE
6" = 1'-0"
18
13
12
30
16
17
7
10
DOOR JAMB DETAIL
9
2A
INTO METAL STRUCTURES
6" = 1'-0"
18
13
12
30
16
17
10
7
DOOR JAMB DETAIL
9
2B
INTO WOOD STRUCTURES
6" = 1'-0"
2 1/2"
1/8"
3 3/4" 1 1/8"
DLO.
2 1/2"
1/8"
3 3/4" 1 1/8"
DLO.
2 1/2"
1/8"
3 3/4" 1 1/8"
DLO.
2 1/2"
11/32"
3 1/2" 1 1/8"
DLO.
1/4"
2 1/2"
11/32"
3 1/2" 1 1/8"
DLO.
1/4"
2 1/2"
11/32"
3 1/2" 1 1/8"
DLO.
3/4"
GLASS
BITE (TYP.)
4
3/4"
GLASS
BITE (TYP.)
4
3/4"
GLASS
BITE (TYP.)
4
3/4"
GLASS
BITE (TYP.)
4
3/4"
GLASS
BITE (TYP.)
4
3/4"
GLASS
BITE (TYP.)
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
PERIMETER SEALANT BY INSTALLER
OR OTHERS. TYPICAL AT INTERIOR
PERIMETER
SEALANT BY
INSTALLER
PERIMETER
SEALANT BY
INSTALLER
PERIMETER
SEALANT BY
INSTALLER
PERIMETER
SEALANT BY
INSTALLER
PERIMETER SEALANT BY
INSTALLER OR OTHERS.
TYPICAL AT INTERIOR
PERIMETER
SEALANT BY
INSTALLER
BUTT HINGE
OR CONTINUOUS GEAR
BUTT HINGE
OR CONTINUOUS GEAR
CONTINUOUS GEAR
OR BUTT HINGE
CONTINUOUS GEAR
OR BUTT HINGE
CONTINUOUS GEAR
OR BUTT HINGE
#12 x 1
1
8
" F.H. SMS SCREW
LOCATED EVERY 16" O.C. & 6"
FROM EACH END. (TYPICAL)
#12 x
1
2
" F.H. SMS SCREW
LOCATED EVERY 16" O.C. & 6"
FROM EACH END. (TYPICAL)
2" x 1
1
4
" x
3
4
" ALUMINUM
REINFORCEMENT BLOCK
(TYPICAL)
36
36
36
36
36
36
7AOR 7AOR 7AOR
NOTE:
ANCHORS PER ANCHOR SCHEDULE ON SHEET 5. SEE
TYPICAL ELEVATION ON SHEETS 2 THROUGH 5 FOR SPACING
25
PERIMETER SEALANT BY INSTALLER
OR OTHERS. TYPICAL AT INTERIOR
25
PERIMETER SEALANT BY INSTALLER
OR OTHERS. TYPICAL AT INTERIOR
PERIMETER SEALANT BY
INSTALLER OR OTHERS.
TYPICAL AT INTERIOR
PERIMETER SEALANT BY
INSTALLER OR OTHERS.
TYPICAL AT INTERIOR
AutoCAD SHX TextAPI-1215
AutoCAD SHX TextAPI-1215
AutoCAD SHX TextAPI-1215
AutoCAD SHX TextAPI-1215
AutoCAD SHX TextAPI-1215
AutoCAD SHX TextAPI-1215
AutoCAD SHX TextCONTACT: KERRI BEALS
AutoCAD SHX Text12157 W. LINEBAUGH AVENUE #335
AutoCAD SHX TextAMERICAN PRODUCTS, INC. (API)
AutoCAD SHX TextPH (813)925-0144
AutoCAD SHX TextTAMPA, FL 33626
AutoCAD SHX TextWWW.AMERICANPROD.COM
AutoCAD SHX Textwith storefront elevations and section
AutoCAD SHX TextAPI Recommends that this note appear
AutoCAD SHX Textview details in your blueprints.
AutoCAD SHX TextAmerican Products, Inc. (API). No substitutions
AutoCAD SHX TextStorefront and related materials provided by
AutoCAD SHX Textwithout written consent from store owner/
AutoCAD SHX TextArchitect. API (813)925-0144
AutoCAD SHX TextCustomer:
AutoCAD SHX TextAssembly:
AutoCAD SHX TextScale:
AutoCAD SHX TextDrawn By:
AutoCAD SHX TextDate:
AutoCAD SHX TextSheet:
AutoCAD SHX TextRevision:
AutoCAD SHX TextDate:
AutoCAD SHX TextAPI IN-HOUSE
AutoCAD SHX TextF2500IR COMMERCIAL DOOR WITH TRANSOM
AutoCAD SHX TextN.T.S.
AutoCAD SHX Text06/17/2016
AutoCAD SHX Text9
-
816
15
9
26
10
#12 F.H. SMS SCREW
LOCATED EVERY 16" O.C. & 6"
FROM EACH END.
SCREW TIP TO BE SHEARED
OFF AFTER INSTALL
1
13
12
30
16
17
ATTACH INTERIOR GLASS STOP
TO DOOR W/ #10-32x1/2"
PHPHMS SCREWS 3" AT EACH
END AND 7-1/2" (MAX.) O.C.
13
12
30
16
17
26
5
ATTACH INTERIOR GLASS STOP
TO DOOR W/ #10-32x1/2"
PHPHMS SCREWS 3" AT EACH
END AND 7-1/2" (MAX.) O.C.
27
11
13
12
30
16
17
7
10
4
23
13
12
30
16
17
36
13
12
16
17
36
30
9" = 1'-0"
DOOR JAMB W/ SIDELITE DETAIL
10
3
6" = 1'-0"
DOOR MEETING STILES DETAIL
10
4
6" = 1'-0"
HEAD DETAIL
10
1
6" = 1'-0"
SILL DETAIL
10
2
2 1/2"
1/8"
3 1/2"
1 1/8"
DLO
.
1 1/8"
6 1/2"
1/4"
2 1/2"
11/32"
3 3/4" 1 1/8"
DLO.
1/8"
3 3/4" 1 1/8"
DLO.
3 3/4"1 1/8"
DLO.
3/4"
GLASS
BITE
(TYP.)
3/4"
GLASS
BITE (TYP.)
3/4"
GLASS
BITE (TYP.)
3/4"
GLASS
BITE (TYP.)
3/4"
GLASS
BITE
(TYP)
3/4"
GLASS
BITE
(TYP)
EXTERIOR
INTERIOR
EXTERIOR
INTERIOR
EXTERIO
R
816
15
9
26
10
#12 F.H. SMS SCREW
LOCATED EVERY 16" O.C. & 6"
FROM EACH END.
SCREW TIP TO BE SHEARED
OFF AFTER INSTALL
1
13
12
30
16
17
ATTACH INTERIOR GLASS STOP
TO DOOR W/ #10-32x1/2"
PHPHMS SCREWS 3" AT EACH
END AND 7-1/2" (MAX.) O.C.
6" = 1'-0"
HEAD DETAIL
10
1A
2 1/2"
1/8"
3 1/2"
1 1/8"
3/4"
GLASS
BITE
(TYP.)
3/4"
GLASS
BITE
(TYP)
EXTERIO
R
1/4-20 SMS
SCREW 10" O.C.
37
3839
CONTINUOUS
GEAR HINGE
OR BUTT HINGE
#12 x 1
1
8
" F.H. SMS SCREW
LOCATED EVERY 16" O.C. & 6"
FROM EACH END. (TYPICAL)
2" x 1
1
4
" x
3
4
" ALUMINUM
REINFORCEMENT BLOCK
(TYPICAL)
#12 x
1
2
" F.H. SMS SCREW
LOCATED EVERY 16" O.C. & 6"
FROM EACH END. (TYPICAL)
NOTE:
ANCHORS PER ANCHOR SCHEDULE ON SHEET 5. SEE
TYPICAL ELEVATION ON SHEETS 2 THROUGH 5 FOR SPACING
7AOR
1/8"
AutoCAD SHX TextAPI-1215
AutoCAD SHX TextCONTACT: KERRI BEALS
AutoCAD SHX Text12157 W. LINEBAUGH AVENUE #335
AutoCAD SHX TextAMERICAN PRODUCTS, INC. (API)
AutoCAD SHX TextPH (813)925-0144
AutoCAD SHX TextTAMPA, FL 33626
AutoCAD SHX TextWWW.AMERICANPROD.COM
AutoCAD SHX Textwith storefront elevations and section
AutoCAD SHX TextAPI Recommends that this note appear
AutoCAD SHX Textview details in your blueprints.
AutoCAD SHX TextAmerican Products, Inc. (API). No substitutions
AutoCAD SHX TextStorefront and related materials provided by
AutoCAD SHX Textwithout written consent from store owner/
AutoCAD SHX TextArchitect. API (813)925-0144
AutoCAD SHX TextCustomer:
AutoCAD SHX TextAssembly:
AutoCAD SHX TextScale:
AutoCAD SHX TextDrawn By:
AutoCAD SHX TextDate:
AutoCAD SHX TextSheet:
AutoCAD SHX TextRevision:
AutoCAD SHX TextDate:
AutoCAD SHX TextAPI IN-HOUSE
AutoCAD SHX TextF2500IR COMMERCIAL DOOR WITH TRANSOM
AutoCAD SHX TextN.T.S.
AutoCAD SHX Text06/17/2016
AutoCAD SHX Text10
-
1.750"
1.750"
3.728" N.F.F.
3.688"
3.688"
3.728" N.F.F.
1.750"
3.688"
3.728" N.F.F.
1.650"
6.500"
1.660"
3.500"
0.670"
2.133"
2.500"
4.969"
1.630"
1.429"
0.500"
5.000"
5.000"
2.500"
5.000"
2.500"
API-2577
INTERIOR GASKET
API-2577
EXTERIOR GASKET
API-2537-I
9
16
" INTERIOR GLASS
STOP
API-2537-E
9
16
" EXTERIOR GLASS
STOP
API-2577
EXTERIOR GASKET
(STOREFRONT)
1.135"
1.135"
API-1216
MEDUIM ROUNDED
STILE WITH AST
API-1217
MEDIUM ROUNDED
STILE
API-1203
3
1
2
" TOP RAIL
API-1215
MEDIUM ROUNDED
STILE
API-1213
6
1
2
" RAIL
API-2510
OPEN BACK HORIZONTAL
API-2564
HEAVY VERTICAL
API-2521
TUBE HORIZONTAL
API-2525
GLASS STOP
API-2582
SNAP IN DOOR STOP
PEMCO 2005AV
API-2546
REINFORCED FLAT
FILLER
3.898"
0.845"
API-2512
OPEN BACK VERTICAL
5.000"
2.500"
3.898"
0.778"
1.687"
1.374"
API-2546
SHEAR BLOCK
API-2563
DOOR JAMB
2.484"
4.984"
PARTS LIST
API-2545
NO WATER RATED
0.110"
1.000"
0.079"
1.631" 1.750" 1.619"
0.079"
0.079"
0.079"
1.561"
0.110"
0.110"
1.562"
0.125"
0.125"
0.110"
0.090"
0.500"
0.062"
0.126"
0.079"
0.079"
1.189"
1.603"
1.063"
1.311"
0.235"
0.091"
0.091"
1.631" 1.750" 1.619"
0.235"
1.549"
0.080"
0.562"
0.562"
0.125"
0.079"
1.631" 1.750" 1.619"
0.079"
0.079"
0.079"
1.561"
0.079"
0.079"
3.898"
0.079"
0.125"
0.063"
0.079"
0.265"
0.188"
API-2564-A
ALTERNATE MULLION
2.500"
5.000"
0.235"
0.091"
0.091"
0.235"
1.631" 1.750" 1.619"
1.274"
1.681"
0.197"
0.197"
0.094"
0.157"
0.165"
0.094"
NOTE:
EXTRUSIONS NOT TO SCALE.
AutoCAD SHX Text1
AutoCAD SHX Text2
AutoCAD SHX Text3
AutoCAD SHX Text4
AutoCAD SHX Text5
AutoCAD SHX Text6
AutoCAD SHX Text7
AutoCAD SHX Text8
AutoCAD SHX Text9
AutoCAD SHX Text10
AutoCAD SHX Text11
AutoCAD SHX Text12
AutoCAD SHX Text13
AutoCAD SHX Text15
AutoCAD SHX Text17
AutoCAD SHX Text16
AutoCAD SHX Text14
AutoCAD SHX Text18
AutoCAD SHX Text21
AutoCAD SHX TextAPI-2511 SHALLOW POCKET
AutoCAD SHX Text22
AutoCAD SHX Text24
AutoCAD SHX Text25
AutoCAD SHX Text7A
AutoCAD SHX TextCONTACT: KERRI BEALS
AutoCAD SHX Text12157 W. LINEBAUGH AVENUE #335
AutoCAD SHX TextAMERICAN PRODUCTS, INC. (API)
AutoCAD SHX TextPH (813)925-0144
AutoCAD SHX TextTAMPA, FL 33626
AutoCAD SHX TextWWW.AMERICANPROD.COM
AutoCAD SHX Textwith storefront elevations and section
AutoCAD SHX TextAPI Recommends that this note appear
AutoCAD SHX Textview details in your blueprints.
AutoCAD SHX TextAmerican Products, Inc. (API). No substitutions
AutoCAD SHX TextStorefront and related materials provided by
AutoCAD SHX Textwithout written consent from store owner/
AutoCAD SHX TextArchitect. API (813)925-0144
AutoCAD SHX TextCustomer:
AutoCAD SHX TextAssembly:
AutoCAD SHX TextScale:
AutoCAD SHX TextDrawn By:
AutoCAD SHX TextDate:
AutoCAD SHX TextSheet:
AutoCAD SHX TextRevision:
AutoCAD SHX TextDate:
AutoCAD SHX TextAPI IN-HOUSE
AutoCAD SHX TextF2500IR COMMERCIAL DOOR WITH TRANSOM
AutoCAD SHX TextN.T.S.
AutoCAD SHX Text06/17/2016
AutoCAD SHX Text11
-
ACC-110
SETTING BLOCK
API-0069
DOOR SWEEP
FS-2594
ASSEMBLY SCREW
#12x1-1/4" PHSMS "AB"
DOW 995
-
WATER DIVERTERS
1 5/8"
1/2"
1.200"
0.250"
TAPCON/PERIMETER
ANCHOR
5
16
" DIA. BY ITW
API-2550-EC
END DAM
5 1/4"
2 1/2"
#10-32x
1
2
" PHPHMS
SCREW
PARTS LIST
ALUMINUM
REINFORCEMENT
ALUMINUM
REINFORCEMENT
ALUMINUM
REINFORCEMENT
2 1/4"
7/8"
1 3/4"
3/8"
3/4"
7/8"
NOTE:
EXTRUSIONS NOT TO SCALE.
AutoCAD SHX Text26
AutoCAD SHX Text27
AutoCAD SHX Text28
AutoCAD SHX Text30
AutoCAD SHX Text31
AutoCAD SHX Text35
AutoCAD SHX Text36
AutoCAD SHX Text32
AutoCAD SHX Text37
AutoCAD SHX Text38
AutoCAD SHX Text39
AutoCAD SHX TextCONTACT: KERRI BEALS
AutoCAD SHX Text12157 W. LINEBAUGH AVENUE #335
AutoCAD SHX TextAMERICAN PRODUCTS, INC. (API)
AutoCAD SHX TextPH (813)925-0144
AutoCAD SHX TextTAMPA, FL 33626
AutoCAD SHX TextWWW.AMERICANPROD.COM
AutoCAD SHX Textwith storefront elevations and section
AutoCAD SHX TextAPI Recommends that this note appear
AutoCAD SHX Textview details in your blueprints.
AutoCAD SHX TextAmerican Products, Inc. (API). No substitutions
AutoCAD SHX TextStorefront and related materials provided by
AutoCAD SHX Textwithout written consent from store owner/
AutoCAD SHX TextArchitect. API (813)925-0144
AutoCAD SHX TextCustomer:
AutoCAD SHX TextAssembly:
AutoCAD SHX TextScale:
AutoCAD SHX TextDrawn By:
AutoCAD SHX TextDate:
AutoCAD SHX TextSheet:
AutoCAD SHX TextRevision:
AutoCAD SHX TextDate:
AutoCAD SHX TextAPI IN-HOUSE
AutoCAD SHX TextF2500IR COMMERCIAL DOOR WITH TRANSOM
AutoCAD SHX TextN.T.S.
AutoCAD SHX Text06/17/2016
AutoCAD SHX Text12
-
Bill of Materials
MEDIUM ROUNDED STILE W/ AST
MEDIUM ROUNDED STILE
3
1
2
" TOP RAIL
MEDIUM ROUNDED STILE
6
1
2
" RAIL
HEAVY VERTICAL
OPEN BACK HORIZONTAL
TUBE HORIZONTAL
9
16
" INTERIOR GLASS STOP
GLASS STOP
FLAT FILLER
9
16
" EXTERIOR GLASS STOP
EXTERIOR GASKET (STOREFRONT) PART#G-150
EXTERIOR GASKET 1" NON IMPACT PART#G-150
INTERIOR GASKET PART#G-150
REINFORCED FLAT FILLER
SNAP IN DOOR STOP
OPEN BACK SILL (NOT USED)
SUBSILL (NOT USED)
SHALLOW POCKET
1
2
3
4
5
24
6
7
8
9
11
12
13
14
15
16
17
18
10
19
20
21
22
23
OPEN BACK VERTICAL
9
16
" POCKET REDUCER - (NOT USED)
SHEAR BLOCK
25
DOOR FRAME
26
27
28
30
31
32
34 -
35
36
1/2" X 5" X 8' THRESHOLD
SETTING BLOCKS
DOOR SWEEP
SCREW SPLINE SCREW #12x1-1/4" PHSMS "AB"
WATER DIVERTERS
DOW CORNING 995
END DAM
(NOT USED)
TAPCON/PERIMETER ANCHOR 5/16" DIA.
#10-32x1#2" PHPHMS SCREW
ALU 6063-T6 API-1203
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
API-1216
API-1217
API-1215
API-1213
API-2510
API-2564
API-2521
API-2525
API-2582
2005AV
API-2537-I
API-2537-E
API-2545
API-2577
API-2577-E
API-2577-I
API-2546
API-2520
API-2550
API-2511
API-2512
API-2581
API-2546
API-2563
ACC 110
FS-2594
API-2550-EC
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
ALU 6063-T6
GS-2575
GS-2570
GS-2576
PartMaterial
Part No.
API-2500-DS
API-2500-WD
38
2
1
4
"x
7
8
" REINFORCEMENT
39
40
ALU 6063-T6
SILICONE
ALU 6063-T6
ALU 6063-T6
1
3
4
"x
3
8
" REINFORCEMENT
3
4
"x
7
8
" REINFORCEMENT
37#12 FH SMS SCREW
NOTE: ALTERNATE HARDWARE MAY BE
USED UNDER SITE SPECIFIC ENGINEERING
29(NOT USED)
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX Text-
AutoCAD SHX TextCONTACT: KERRI BEALS
AutoCAD SHX Text12157 W. LINEBAUGH AVENUE #335
AutoCAD SHX TextAMERICAN PRODUCTS, INC. (API)
AutoCAD SHX TextPH (813)925-0144
AutoCAD SHX TextTAMPA, FL 33626
AutoCAD SHX TextWWW.AMERICANPROD.COM
AutoCAD SHX Textwith storefront elevations and section
AutoCAD SHX TextAPI Recommends that this note appear
AutoCAD SHX Textview details in your blueprints.
AutoCAD SHX TextAmerican Products, Inc. (API). No substitutions
AutoCAD SHX TextStorefront and related materials provided by
AutoCAD SHX Textwithout written consent from store owner/
AutoCAD SHX TextArchitect. API (813)925-0144
AutoCAD SHX TextCustomer:
AutoCAD SHX TextAssembly:
AutoCAD SHX TextScale:
AutoCAD SHX TextDrawn By:
AutoCAD SHX TextDate:
AutoCAD SHX TextSheet:
AutoCAD SHX TextRevision:
AutoCAD SHX TextDate:
AutoCAD SHX TextAPI IN-HOUSE
AutoCAD SHX TextF2500IR COMMERCIAL DOOR WITH TRANSOM
AutoCAD SHX TextN.T.S.
AutoCAD SHX Text06/17/2016
AutoCAD SHX Text13
-
NOTE:
SEAL ALL CORNERS WITH
DOW CORNING 795 SILICONE
AutoCAD SHX TextDOOR ASSEMBLY
AutoCAD SHX Text8
AutoCAD SHX Text6
AutoCAD SHX Text10
AutoCAD SHX Text1
AutoCAD SHX Text12
AutoCAD SHX Text13
AutoCAD SHX Text22
AutoCAD SHX Text22
AutoCAD SHX Text4
AutoCAD SHX Text11
AutoCAD SHX Text5
AutoCAD SHX Text12
AutoCAD SHX Text13
AutoCAD SHX Text28
AutoCAD SHX Text28
AutoCAD SHX TextCONTACT: KERRI BEALS
AutoCAD SHX Text12157 W. LINEBAUGH AVENUE #335
AutoCAD SHX TextAMERICAN PRODUCTS, INC. (API)
AutoCAD SHX TextPH (813)925-0144
AutoCAD SHX TextTAMPA, FL 33626
AutoCAD SHX TextWWW.AMERICANPROD.COM
AutoCAD SHX Textwith storefront elevations and section
AutoCAD SHX TextAPI Recommends that this note appear
AutoCAD SHX Textview details in your blueprints.
AutoCAD SHX TextAmerican Products, Inc. (API). No substitutions
AutoCAD SHX TextStorefront and related materials provided by
AutoCAD SHX Textwithout written consent from store owner/
AutoCAD SHX TextArchitect. API (813)925-0144
AutoCAD SHX TextCustomer:
AutoCAD SHX TextAssembly:
AutoCAD SHX TextScale:
AutoCAD SHX TextDrawn By:
AutoCAD SHX TextDate:
AutoCAD SHX TextSheet:
AutoCAD SHX TextRevision:
AutoCAD SHX TextDate:
AutoCAD SHX TextAPI IN-HOUSE
AutoCAD SHX TextF2500IR COMMERCIAL DOOR WITH TRANSOM
AutoCAD SHX TextN.T.S.
AutoCAD SHX Text06/17/2016
AutoCAD SHX Text14