American National Standard - Woolf Distributing › wp-content › ...Sept-2008.pdf2007 2011 2001...
Transcript of American National Standard - Woolf Distributing › wp-content › ...Sept-2008.pdf2007 2011 2001...
DOOR DOOR THICKNESS
WEIGHT 3/4" 1 1/8" 1 3/8" 1 3/4"
Up To
50# 1166 118F (C) 1138
2200 1166/2200 134F (C)
2204F 2200F 1 WHL
138F (C)
75# 118F (C) 2200F 2 WHL 134F (C)
138F (C)
125# 111SD(C) 110SD(C) 138F (C) 134F (C)
200# 138F* (C) 134F* (C)
300# 200SD (C) 200SD (C)
(C) Designates Commercial Grade *Use With 1125 Ball Bearing HangerFINISHED OPENING HEIGHTS111SD, 118F = Door Height Plus 2-1/8"
100SD, 134F & 138F = Door Height Plus 2-3/8"(all Other Residential Sets = Door Height Plus 1-3/4")
200SD = Door Height Plus 3-3/4"
FINISHED OPENING WIDTHS (ALL SERIES)2 DR. - Door Width x 2 Minus 1"3 DR. - Door Width x 3 Minus 2"4 DR. - Door Width x 4 Minus 2"
SINGLE TRACK2800 Aluminum - Doors Up To 50# 2850 Steel - Doors Up To 50#100 Aluminum - Doors Up To 125# 100 w/1125* - Doors Up To 200#111 Aluminum - Doors Up To 80# 111 w/1025* - Doors Up To 150#200 - Doors Up To 300#
SPECIALTY TRACK (1-3/8" - 1-3/4") 2610F - 125# Doors - Wall Mount
2800F - 75# Doors Double Fascia
American National StandardANSI# Door Wt. Johnson Series Number PageD8611 50 lb. Doors 200FD, 100FD, 111FD ............................................... 2, 3D8612 30 lb. Doors 1700,1718,1734, 1738,1770,1825,1838 .................... 4, 5D8613 20 lb. Doors Any of the above ........................................................ 4, 5D8621 50 lb. Doors 200FD, 100FD, 111FD ................................................ 2, 3D8622 30 lb. Doors 1700,1718,1734,1738,1770,1825,1838 ..................... 4, 5D8623 20 lb. Doors Any of the above ................................................ 2, 3, 4, 5D8641 50 lb. Doors 200RD, 100RD ............................................................... 6D8642 30 lb. Doors Same as above ............................................................... 6D8651 50 lb. Doors 200RD, 100RD ............................................................... 6D8652 30 lb. Doors Same as above ............................................................... 6D8661 50 lb. Doors 200RD, 100RD ............................................................... 6D8662 30 lb. Doors Same as above ............................................................... 6D86671 80 lb. Door 1500, 2710, 2511, 2711, 2000 ....................... 8, 9, 10, 11D86672 60 lb. Door Same as above ............................................... 8, 9, 10, 11D8681 120 lb. Door 200PD, 100PD ............................................................. 12D8691 60 lb. Door 111PD .......................................................................... 13D8692 40 lb. Door 2800, 2850 ............................................................. 13, 14D8701 80 lb. Door 1500, 2710, 2511, 2711, 2000 ....................... 8, 9, 10, 11D8702 60 lb. Door Same as above ............................................... 8, 9, 10, 11D8711 120 lb. Door 1500, 1560, 2710, 2000 ................................. 8, 9, 10, 11D8721 60 lb. Door 2511, 2711 ................................................................... 11D8722 40 lb. Door Any of the above ............................................ 8, 9, 10, 11D8731 120 lb. Doors 200SD, 134F, 118F ................................................. 15, 16D8741 80 lb. Doors Same as above ....................................................... 15, 16D8742 40 lb. Doors 1138, 1166, 2200 ................................................... 19, 20D8751 80 lb. Doors 134F, 138F, 118F .................................................... 17, 18D8751 40 lb. Doors 2200F, 2204F .......................................................... 18, 19D8761 80 lb. Doors Not AvailableD8762 40 lb. Doors 2222 ............................................................................. 18D8771 2155 ............................................................................. 28D0781 14US3, 15US3, 20, 21, 30, 35, 40 ............................... 26D1791 Surface Pull Not AvailableD2801 150 ......................................................................... 25, 26D0811 2118, 2133, 2134, 2135, 2138, 2035, 2034 ........... 27, 28D0821 1521 ............................................................................. 14
2INDEX 1
100FD ................... 2100MD ................ 21100PD ................. 12100RD................... 6100SD ................. 15111FD ................... 3111MD ................ 21111PD ................. 13111SD ................. 16113F .................... 20118F .................... 17134F .................... 17138F .................... 16170A ..................... 4200FD ................... 2200MD ................ 21200PD ................. 12200RD................... 6
2200 .................... 192200F .................. 182204F .................. 182222 .................... 182511 .................... 112610F .................... 72711 .................... 112710 .................... 102800 .................... 132800F .................. 142850 .................... 137700 .................... 227800 .................... 2288ADJ ................. 2288TEL ................. 228800 .................... 229000 ...................... 59550 ...................... 5
200SD ................. 15200WM ................. 71138 .................... 201166 .................... 191500 ...................... 91510/1511 ........... 141521/1534 ........... 141560 .................... 101601 ...................... 51700 ...................... 41700RD................. 61718/34/38 ............ 31740 ...................... 61770 ...................... 31825 ...................... 51838 ...................... 52000 ...................... 82060 ...................... 8
Sliding Door Hardware SelectionGuide
DOOR MAX DOOR DOOR THICKNESSPANEL WEIGHT WIDTH 1 1/8" 1 3/8" 1 3/4"
Up to 24" 1825 182530# 1838 1838
1700 1700 17001601 1601 1601
40# 24" 1700 1700 170050# 24" 111FD 111FD 111FD75# 24" 100FD 100FD125# 48" 200FD 200FD
FINISHED FINISHEDSERIES DESCRIPTION OPENING HEIGHT OPENING WIDTH
Door Height Plus 2 Door Plus 4 Door Plus1601 100% Full Access +5/8" +7/16" +5/8"1700 Top Hung +2" +9/16" +13/16"1825 Commodity Set +1 3/4" +9/16" +13/16"1838 Commodity Set +1 3/4" +9/16" +13/16"111FD Light Commercial +2 3/4" +9/16" +13/16"100FD Commercial +2 7/8" +9/16" +13/16"200FD Heavy Commercial +4 1/4" +11/16" +1"NOTE: Door Panel Width Not To Exceed 24" - Except 200FD 48"MULTIFOLD SHUTTER AND ROOM DIVIDER HARDWARE AVAILABLE• 1740 - 3/4" Shutter• 1700RD - 1 1/8" To 1 3/8" Doors To 20# Panels (Max. 24" Panels)• 100RD - 1 3/8" To 1 3/4" Doors To 50# Panels (Max. 24" Panels)• 200RD - 1 1/8" To 1 3/4" Doors To 75# Panels (Max. 36" Panels)POCKET DOOR SELECTION GUIDE2511 Series Up To 80# Doors – *Up To 150# Doors – *With 1025 Ball Bearing Rollers1500 Series Up To 125# Doors – *Up To 200# Doors – *With 1125 Ball Bearing Rollers2000 Series Up To 300# DoorsROUGH OPENINGS Width: 2 x Door Width Plus 1"Height: 6' 8" = 84 1/2" - 7' 0" = 88 1/2" - 8' 0" = 100 1/2"For 1 3/4" Thick Doors, Use The 1575PPK3 Adaptor KitNote: 1500/1560/2000 Series Available Up To 5' Wide and 9' HighNote: 1560 Series Door Ht. + 5" Note: 2000 Series Door Ht . + 6 3/4"Note: 2060 Series Door Ht . + 7 1/4"
Folding Door Selection Guide
ANSI Standards ......................................................................... 1Bubble Packed Parts & Accessories ........................................ 25Bulk Parts .................................................................... 26, 27, 28Bulk Tracks .............................................................................. 23Door Displays .......................................................................... 22Folding Door Hardware ................................................. 2, 3, 4, 5Merchandiser Centers .............................................................. 24Multi-Pass Sliding Doors ........................................................ 21Pocket Door Frames and Hardware ......... 8, 9, 10, 11, 12, 13, 14Policy Information ................................................................... 28Room Divider Hardware ........................................................... 6Sliding Door Hardware .............................. 15, 16, 17, 18, 19, 20Sliding/Folding Door Selection Guide ...................................... 1Table Legs ................................................................................ 22Wall Mount Fascia ..................................................................... 7
200FD
200FD Surface Mount Bifold Hardwarefor 1-1/8" to 1-3/4" panels to 125 lbs.
A premium commercial bifold hardwarefor 12"- 48" panels up to 9'0" high. Heavyduty I-beam track with positive pivot lock,top hung, four wheel (1" dia.) ballbearing hangers, heavy duty bottompivot, floor bracket with screw adjustingbottom pivot socket. Brass-tone steelparts. 2003 Hinges not included,order separately.
ORDERING DATAOrder No. Opening LBS./CASE200FD482 48" 2 Door200FD602 60" 2 Door Bulk200FD722 72" 2 Door 5/CT.200FD962 96" 2 Door 6/1200FD484 48" 4 Door 8/1200FD604 60" 4 Door200FD724 72" 4 Door200FD964 96" 4 Door
Order No. PKG. BULK200FD482 80.67200FD602 87.07200FD722 98.11 92.97200FD962 111.91 104.78200FD484 133.07200FD604 139.47200FD724 145.37200FD964 157.182003 (Pair) 9.78
200
2002
20072011
2001
2010 37
1712 WRENCH
2003Ball Bearing Hinge
Finishes2003US32 Bright Brass2003US52 Antique Brass200326D2 Satin Chrome
2
Order No. PKG. BULK100FD362 46.21 39.12100FD484 80.90 72.19100FD604 84.65 74.98100FD724 88.20 77.52100FD964 96.15 83.45
100FD Surface Mount Bifold Hardware for 1-1/8" to 1-3/4" panels to 75 lbs.
An excellent commercial bifold hardwarefor 12"-24" panels up to 9'0" high.Convex rail aluminum track with positivepivot lock, top hung, three wheel (1" dia.)ball bearing hangers, non-mortise lift offhinges. Floor bracket has a screwadjusting bottom pivot socket. Brass-tonesteel parts.
ORDERING DATAOrder No. Opening LBS./CASE100FD362 36" 2 Door 15/5100FD484 48" 4 Door 25/5100FD604 60" 4 Door 26/5100FD724 72" 4 Door 27/5100FD964 96" 4 Door 33/3
Bulk25/CT.
100FD
33
100
1125
107
1706
10111155
1606
1700With 1710 pivots
3111FD Surface Mount Bifold Hardwarefor 3/4" to 1-3/4" panels to 50 lbs.
A superior light commercial bifoldhardware for 12"-24" panels up to 9'0"high. Convex rail aluminum track, tophung, three wheel (3/4" dia.) hangers, fourway adjustable jamb bracket, shockabsorbing “breathing” hinges self locateand automatically align to door. Brass-tone steel parts.
Order No. Opening LBS./CASE111FD362 36" 2 Door 11/5111FD484 48" 4 Door 18/5111FD604 60" 4 Door 19/5111FD724 72" 4 Door 20/5111FD964 96" 4 Door 24/3
Order No. PKG. BULK111FD362 28.99 22.18111FD484 48.74 40.38111FD604 51.21 41.97111FD724 53.79 43.63111FD964 60.56 47.04
Bulk25/CT.
111FD
111
1711
ORDERING DATA
1712
1703
1771
1808(4dr. sets)
1972 1773
1711
1713
1770 Side Mount Bifold Hardwarefor 3/4" panels to 40 lbs.
ORDERING DATAOrder No. Opening LBS./CASE1770243H 24" 2 Door1770303H 30" 2 Door1770363H 36" 2 Door Bulk1770486H 48" 4 Door Only1770606H 60" 4 Door 25/CT.1770726H 72" 4 Door1770966H 96" 4 DoorOrder No. PKG. BULK1770243H 17.521770303H 18.061770363H 18.601770486H 34.151770606H 35.271770726H 36.381770966H 39.65Same features as 1718/1734/1738 but for3/4" doors only. Pivot and guide plate is1-1/4" longer than 1718/1734/1738plates. Also available in white (bulk only).
1770
(See 1770 for parts)
1724
1718/1734/1738 Side Mount Bifold Hardware forpanels to 40 lbs. 1734=3/4", 1718=1-1/8", 1738=1-3/8"
Same features as 1700 series, excepthardware is mounted to back side of door.Side mount plates can be adjusted ifopening is slightly out of square. Top pivotand guide must be kept parallel with track.Also available in white (bulk only).
ORDERING DATASpecify Opening LBS./CASE
24" 2 Door30" 2 Door
1734=3/4" 36" 2 Door Bulk1718=1-1/8" 48" 4 Door Only1738=1-3/8" 60" 4 Door 25/CT.
72" 4 Door96" 4 Door
Specify Opening BULK24" 2 Door 15.7330" 2 Door 16.27
1734=3/4" 36" 2 Door 16.811718=1-1/8" 48" 4 Door 30.711738=1-3/8" 60" 4 Door 31.83
72" 4 Door 32.9496" 4 Door 36.21
1738
33
1707
1155 118
17031020
1700
170A Top Mount Bifold Hardware for3/4" to 1-3/4" panels to 40 lbs.
ORDERING DATAOrder No. Opening LBS./CASE170A243H 24" 2 Door 9/5170A303H 30" 2 Door 10/5170A363H 36" 2 Door 11/5170A486H 48" 4 Door 17/5170A606H 60" 4 Door 18/5170A726H 72" 4 Door 20/5170A966H 96" 4 Door 23/5
Order No. PKG. BULK170A243H 19.61 13.95170A303H 21.01 14.62170A363H 21.06 15.29170A486H 34.33 27.23170A606H 35.85 28.66170A726H 37.74 30.06170A966H 41.63 34.52
Bulk Only25/CT.
170A
1712
1703
1713
1808 (4 dr. sets)
1711
17011705
1707
170A with1710 pivots
4
33
1700 Top Mount Bifold Hardware for3/4" to 1-3/4" panels to 40 lbs.
ORDERING DATA
Order No. Opening LBS./CASE1700243H 24" 2 Door 9/51700303H 30" 2 Door 10/51700363H 36" 2 Door 11/51700486H 48" 4 Door 17/51700606H 60" 4 Door 18/51700726H 72" 4 Door 20/51700966H 96" 4 Door 23/5
Order No. PKG. BULK1700243H 16.55 12.991700303H 17.31 13.531700363H 18.07 14.071700486H 30.82 25.611700606H 32.34 26.731700726H 34.18 27.841700966H 37.94 31.11
BulkOnly
25/CT.
17131712
17011705
1707
1703
1711
1808 (4 dr. sets)
1700 With1710 pivots
A premium aluminum residential bifoldhardware. Top hung hardware allow doorsto hang naturally. Automatic top of doorspacing eliminates gaps. Smooth nonbind-ing operation. Aluminum track withpositive pivot lock. Surface mountedpivots and guides (no hole drilling). Fourway adjustable jamb bracket, shockabsorbing “breathing” hinges self locateand automatically align to door. Brasstonesteel parts.
Same features as the 170A, but withwoodtone steel track.
Also available in white. (Bulk only)
Order No. Size LBS./CASE9018-30P 18"-30" 11/109030-48P 30"-48" 18/109048-72P 48"-72" 24/109072-96P 72"-96" 30/109072120P 72"-120" 38/109096144P 96"-144" 23/59003WHEN ---- 17/209005WHEN ---- 11/209027PLBG ---- 4.5/209028PLBG ---- 4.1/209030PLBG ---- 4/1009030PPK3 ---- 1.2/109500-096 96" 32/20
9000 Closet Rod System
Order No. PKG. BULK9018-30P 10.24 7.319030-48P 13.00 9.869048-72P 16.85 13.589072-96P 25.36 21.539072120P 28.16 24.029096144P 32.80 27.709003WHEN 8.389005WHEN 5.109027PLBG 1.699028PLBG 1.599030PLBG .6779030PPK3 2.629500-096 8.58
ORDERING DATA
22 gauge welded seam tubing platedbright zinc. Rods “Snap” intoend brackets, heavy 12 gauge whitepowder coated shelf and rodsupports.
9500-096
9027 1-3/8" Rod
9028 1" Rod
1" PoleEnd Brackets
9003Shelf/RodSupport
9005Shelf/RodSupport
Bulk15/CT.
Low profile white steel track. Pivots andguides have a needle bearing surface tominimize friction. Jamb bracket haspositive positioning bottom pivot bearingsocket. Hinges are self locating andautomatically align to door. Brass-tonesteel parts.
ORDERING DATAOrder No. Opening LBS./CASE1838243H 24" 2 Door1838303H 30" 2 Door1838323H 32" 2 Door Bulk1838363H 36" 2 Door Only1838486H 48" 2 Door 25/CT.1838606H 60" 4 Door1838726H 72" 4 Door1838966H 96" 4 DoorOrder No. PKG. BULK1838243H 8.411838303H 8.821838323H 9.221838363H 9.221838486H 16.461838606H 17.261838726H 18.071838966H 21.86
1838
18251810
1805
1837
37
18311861
1812 2dr.1814 4dr.
2 door set contents shown
1808(4dr. sets)
1838 Bifold Hardware for 1-1/8" to 1-3/4"panels to 30 lbs. (3/8" pivot/guide hole)
Order No. Opening LBS./CASE1825243H 24" 2 Door ---1825303H 30" 2 Door ---1825323H 32" 2 Door ---1825363H 36" 2 Door 8/51825486H 48" 4 Door 12/51825606H 60" 4 Door 13/51825726H 72" 4 Door 15/51825966H 96" 4 Door 17/5
Low profile woodtone steel track. Pivotsand guides have a needle bearing surfaceto minimize friction. Jamb bracket has anadjustable bottom pivot bearing socket.Hinges are self locating and automaticallyalign to door. Brass-tone steel parts.
1805
33 1808(4dr. sets)
18251810
18011811
1807
1713
1825
ORDERING DATA
Order No. PKG. BULK1825243H (BULK) 9.431825303H (25/ctn) 9.841825323H 10.241825363H 14.86 10.241825486H 24.73 18.441825606H 26.05 19.331825726H 27.69 20.251825966H 32.47 23.04
1825 Bifold Hardware for 1-1/8" to 1-3/4" panels to 35 lbs. (7/16" pivot/guide hole)
5
1601 Full Access Bifold Hardware for 3/4" or 1-3/4" panels to 30 lbs.
1513
Unique bifold provides full jamb to jambaccess. Doors fold 180 degrees and layflat against wall. No top track. Comes withwoodtone non-mortise lift off jambhinges (mortised butts can be used atjamb). Woodtone Control Arm, brass-tone steel parts.
ORDERING DATA
Order No. Panel Size LBS./CASE1601218P 11-3/4"-18" 8/51601824P 18" - 24" 10/5
Order No. PKG. BULK1601218P 30.29 25.411601824P 37.55 28.79
25/ctn
1605
1808
1601
1703
Carton plus screwsand instructions
33
Optional size available for9"-12" panels. Bulk only,consult factory.
1601
1700RD Multi Folding Hardware for 3/4" to 1-3/8" panels to 15 lbs.
Hardware for panels 9" to 18" up to 6'8"high. Aluminum track with positive pivotlock, top hung, surface mounted pivots/hangers, four way adjustable jambbracket, four wheel (7/16" dia.) hanger,non-mortise lift off hinges. Brass-tonesteel parts. (Maximum: Six doors eachway.)
ORDERING DATASpecify LBS./CASE170A Track Only1715BS-A Basic Set “A” 1/11725AOSB Add-On Set “B” 1.2/11759PIVS Pivot Set Only 3.7/10
Specify PKG. BULK170A see pg. 231715BS-A 15.631725AOSB 14.521759PIVS 8.92
1742
1713 1707
16061711
33
170A1710
1700RD
1701
100RD
Hardware for panels 12"-24" up to 9'0"high. Convex rail aluminum track withpositive pivot lock, top hung, three wheel(1" dia.) ball bearing hangers, non-mortise lift off hinges. Floor bracket hasa screw adjusting bottom pivot socket.Brass-tone steel parts. (Maximum: Sixdoors each way.)
ORDERING DATASpecify LBS./CASE100 Track Only1015BS-A Basic Set 1.5/11030AOSB Add-On-Set “B” 1.4/11019PIVS Pivot Set 1.7/1
Specify PKG. BULK100 see pg. 231015BS-A 36.001030AOSB 36.681019PIVS 14.65
1606
33
1155
1011107
17061125
100
2007
200RD Multi Folding Hardware for 1-1/8"to 1-3/4" panels to 75 lbs.
ORDERING DATASpecify LBS./CASE200 Track Only2015BS-A Basic Set 3/12002PLBG Hanger 25/35209PIV-S Top & Bottom
Pivot Set 1.8/1Specify PKG. BULK200 see pg. 232015BS-A 52.342002PLBG 23.67209PIV-S 27.752003 Hinge 9.78 PR
Hardware for panels 12"-36" up to 9'0" high.Heavy duty I-beam track with positive pivotlock, top hung, four wheel (1" dia.) ball bear-ing hangers, heavy duty bottom pivot, floorbracket with screw adjusting bottom pivotsocket. Brass-tone steel parts. (Maximum:Six doors each way.) 2003 Hinges not included,order separately.
2010
200RD
2001
2003 Ball Bearing HingeUS3 - US5 - US26D
2002200 TRACK
37
2011
1740 Shutter Hardware for 3/4" to 1-1/8"wood shutters to 15 lbs.
Hardware for shutters 6" to 18" up to6'8" high. Aluminum track with posi-tive pivot lock, top hung, surfacemounted pivots/hangers, four wheel (7/16" dia.) hangers, low profile combina-tion jamb/floor bracket, non-mortise liftoff shutter hinges. Brass-tone steelparts. (Maximum: Six doors each way.)
Specify LBS./CASE170A Track Only1740BS-A Pivot Set 5.5/101740-AOS Add-on-Set 2.4/101743PPK3 Hinge 1.3/10
1742 1743
17011713 1707
1740RD
170A1710
ORDERING DATA
Specify PKG. BULK170A see pg. 231740BS-A 15.631740-AOS 14.521743PPK3 7.03
1741
100RD Multi Folding Hardware for1-1/8" to 1-3/4" panels to 50 lbs.
6
200WM Wall Mount Fascia for single 1-1/8"or thicker door to 300 lbs.
2610F Wall Mount Fascia for single 1-1/8" to1-3/4" door to 125 lbs. (* 200 lbs. with 1125 Hangers.)
Bulk5/CT.
The 200 WM is a heavy-duty wall mountedsliding door hardware set for interior resi-dential or commercial applications. The200 WM is ideally suited for use when tra-ditional pocket doors cannot be cost ef-fectively or structurally installed. The200WM features a thick walled precisionextruded aluminum I-beam track andheavy-duty extruded aluminum mountingbrackets that can be positioned along thetrack to anchor into wall studs. Four-wheeled ball bearing hangers assuresmooth operation and removable hangerplates allow for easy door installation andremoval. Two different door guides aresupplied with the hardware set for maxi-mum installation flexibility. 14 - 16 gaugezinc dichromate plated steel parts. Tracklengths are available up to 192" (4877 mm).
ORDERING DATAOrder No. Door Size LBS./CASE200WM481 (One 2'0" Door) 7/1200WM601 (One 2'6" Door) 8/1200WM721 (One 3'0" Door) 9/1200WM961 (One 4'0" Door) 11/1
Order No. PKG. BULK200WM481 172.30 162.16200WM601 179.89 168.56200WM721 201.08 189.81200WM961 225.30 216.97
200 Track
200WM12 Guide
2031 DoorGuide
2006
7
Bulk20/CT.
A unique surface mounted hardware foropen pocket doors. Use when normalpocket doors can not be used. Aluminumtrack with convex rails, jump proof threewheel (1" dia.) hangers assure a smoothquiet operation, wall mount guide. Brass-tone steel parts. Optional hanger #1125available for doors up to 200 lbs. (Add$__.__ Bulk only.)
ORDERING DATAOrder No. Door Size LBS./CASE2610F481 (One 2'0" Door) 21/52610F601 (One 2'6" Door) 25/52610F721 (One 3'0" Door) 30/52610F961 (One 4'0" Door) 38/5
Order No. PKG. BULK2610F481 46.87 44.012610F601 55.13 51.512610F721 62.86 58.102610F961 78.98 72.35
12 Guide
2610F
1120 1155
2610F
Optional Hangers 1125(Bulk only.)
2020 Hanger2021 Door Plate
2055 Stop
2680 End Caps
2000 Universal Pocket Door Frame for doors 1-1/8" to1-3/4" and to 300 lbs.
2060 Pocket Door Frame for 1-1/8" to 2-1/4"doors to 300 lbs. each. (2" x 6" stud wall)
For 2 x 4 construction. Aluminum“I” Beam track, smooth quiet opera-tion, rust resistant steel reinforcedwood split studs, jump proof 4 wheelball bearing wheel (1" dia.) Hangers,self-adjusting floor anchors, 2'6" and3'0" headers marked to cut to smalldoor sizes. Brass-tone steel parts.
ORDERING DATA
* 2'6" and 3'0" Frames aremarked for cuttingto smaller sizes.
✓ All the features of the1500 Series.
✓ For doors up to 300 lbs.✓ 2000 Frames can
accommodate doorsup to 1 3/4" thick.1575PPK3 1 3/4" dooradapter includedw/all frames.
2000
200 I-BeamTrack
1550 DoorGuides
1513 DoorBumper
2000 Series Pocket Door Frame Prices
Order No.202668PF* .......................... (For doors up to 30" wide x 80" tall) ............................. 190.50203068PF* .......................... (For doors up to 36" wide x 80" tall) ............................. 197.75204068PF ............................ (For doors up to 48" wide x 80" tall) ............................. 250.26205068PF ............................ (For doors up to 60" wide x 80" tall) ............................. 300.50
202670PF* .......................... (For doors up to 30" wide x 84" tall) ............................. 199.41203070PF* .......................... (For doors up to 36" wide x 84" tall) ............................. 206.91204070PF ............................ (For doors up to 48" wide x 84" tall) ............................. 262.57205070PF ............................ (For doors up to 60" wide x 84" tall) ............................. 315.54
202680PF* .......................... (For doors up to 30" wide x 96" tall) ............................. 219.02203080PF* .......................... (For doors up to 36" wide x 96" tall) ............................. 225.84204080PF ............................ (For doors up to 48" wide x 96" tall) ............................. 284.71205080PF ............................ (For doors up to 60" wide x 96" tall) ............................. 343.83
202690PF* .......................... (For doors up to 30" wide x 108" tall) ........................... 235.93203090PF* .......................... (For doors up to 36" wide x 108" tall) ........................... 243.99204090PF ............................ (For doors up to 48" wide x 108" tall) ........................... 310.19205090PF ............................ (For doors up to 60" wide x 108" tall) ........................... 374.16
2050PLBG Converging Door Kit 10ct/10wt ................................................................. 11.60
2000 Frame
For 2 x 6 construction, the 2060 featuresalumninum I beam track with 4-wheel ballbearing hangers. Also, rust-resistant16 gage all-steel uprights that make thewalls as strong as a stud wall. The 2/6and 3/0 frames are marked for cutting tosmaller door sizes.
ORDERING DATA
2060
Order No. Door Size LBS./CASE20602668 2'6" x 6'8" Door 52/1 (Marked for cutting 2/0 and 2/4 door)20603068 3'0" x 6'8" Door 55/1 (Marked for cutting to any size door)2050PLBG Converg. Dr. Kit 10/10
Order No. PKG.20602668 250.2320603068 259.442050PLBG 11.60
✓ All the features of the 2000 Series.✓ All frames fit 2" x 6" stud walls✓ 16 Gage steel studs make wall strong
as stud walls.✓ 2060 Frames can accommodate
doors up to 2 1/4" thick.
Order No.20602668 ......................... (For doors up to 30" wide x 80" tall) ............ 250.2320603068 ......................... (For doors up to 36" wide x 80" tall) ............ 259.4420604068 ......................... (For doors up to 48" wide x 80" tall) ............ 348.1320605068 ......................... (For doors up to 60" wide x 80" tall) ............ 431.81
20602670 ......................... (For doors up to 30" wide x 84" tall) ............ 263.1120603070 ......................... (For doors up to 36" wide x 84" tall) ............ 272.3220604070 ......................... (For doors up to 48" wide x 84" tall) ............ 360.7520605070 ......................... (For doors up to 60" wide x 84" tall) ............ 435.63
20602680 ......................... (For doors up to 30" wide x 96" tall) ............ 278.3620603080 ......................... (For doors up to 36" wide x 96" tall) ............ 287.5720604080 ......................... (For doors up to 48" wide x 96" tall) ............ 383.6120605080 ......................... (For doors up to 60" wide x 96" tall) ............ 471.02
20602690 ......................... (For doors up to 30" wide x 108" tall) .......... 294.2320603090 ......................... (For doors up to 36" wide x 108" tall) .......... 302.8020604090 ......................... (For doors up to 48" wide x 108" tall) .......... 408.0320605090 ......................... (For doors up to 60" wide x 108" tall) .......... 503.05
2060 Series Pocket Door Frame Prices
.Ready forinstallationin roughopening.
1513
1550
200Track
2060Uprights &
FloorBrackets
Single packedplus
screws andinstructions
Ready forinstallationin roughopening.
2000
8
2020 Hanger2021 Door Plate
2020Hanger
2021 DoorPlate
1500 Commercial Grade Pocket Door Frame for 1" to 1-3/8" (or 1-3/4" w/adapter kit) door to 125 lbs. (200 lbs. with 1125 Hanger*)*
UPRIGHTSPlease Note: 3'6" and 4'0" Frames have 1 extra pair of uprights.4'6" and 5'0" Frames have 2 extra pairs of uprights.
#1568UPRT (6'8" W/floor bracket) ............................................................ 26.32#1570UPRT (7'0" W/floor bracket) ............................................................ 32.94#1580UPRT (8'0" W/floor bracket) ............................................................ 40.70#1590UPRT (9'0" W/floor bracket) ............................................................ 48.36
HANGERS#1120 Standard, maximum weight, 125 lbs. .......................................... 3.98 ea.#1125 Optional, maximum weight, 200 lbs. ......................................... 10.32 ea.#1121 Hanger Plate w/screws ................................................................ 1.23 ea.
For 2 x 4 construction. Removable alumi-num track with convex rails for smoothquiet operation, rust resistant steelreinforced wood split studs, jump proofthree wheel (1" dia.) hangers, self-adjusting floor anchors, 2'6" and 3'0"headers marked to cut to smaller doorsizes. Brass-tone steel parts.
ORDERING DATA
Order No. Door Size LBS./CASE152068PF 2'0" x 6'8" Door 28/1152468PF 2'4" x 6'8" Door 29/1
*152668PF 2'6" x 6'8" Door 30/1152868PF 2'8" x 6'8" Door 30/1
*153068PF 3'0" x 6'8" Door 30/11555PPK3 Conv. Dr. Kit 3/101575PPK3 1-3/4" Dr. Adpt. 3/101500PPK3 Extra Hardware Set 5/10
Order No. PKG. HD/w1125**152068PF 87.80 100.34152468PF 90.28 102.88152668PF 92.09 104.74152868PF 92.70 105.37153068PF 95.72 108.48
Orders in multiples of 49 frames will beskidded - N/C
1555PPK3 6.601575PPK3 5.811500PPK3 12.54
1712
** Includes 1125 Ball Brg. Hangers for doors to 200 lbs.
*Marked forcutting to anyshorter length.Single packed
plusscrews andinstructions
Ready forinstallationin roughopening.
100
11201550
1513
1500
SPECIAL SIZED FRAME PRICESAll Pocket Door Frames listed below contain #1575 1-3/4" adapter kit and #1125 ball bearing hangers.
FRAMES MARKED
WITH • WILL SHIP
FREIGHT COLLECT
IF NOT SHIPPED WITH
A STOCK ORDER
OF MORE THAN
$1,200 LIST.
Order No. Door Size153668PF ............. 42" x 80" .............. 178.15154068PF ............. 48" x 80" .............. 182.65154668PF ............. 54" x 80" .............. 223.68155068PF ............. 60" x 80" .............. 227.76
Order No. Door Size152070PF ............. 24" x 84" .............. 114.54152470PF ............. 28" x 84" .............. 117.23152670PF ............. 30" x 84" .............. 119.21152870PF ............. 32" x 84" .............. 119.87153070PF ............. 36" x 84" .............. 123.33153670PF ............. 42" x 84" .............. 198.20154070PF ............. 48" x 84" .............. 201.50154670PF ............. 54" x 84" .............. 247.77155070PF ............. 60" x 84" .............. 252.06
Order No. Door Size152080PF ............. 24" x 96" .............. 129.88152480PF ............. 28" x 96" .............. 132.69152680PF ............. 30" x 96" .............. 134.76152880PF ............. 32" x 96" .............. 135.45153080PF ............. 36" x 96" .............. 139.07153680PF ............. 42" x 96" .............. 222.41154080PF ............. 48" x 96" ............. 226.38154680PF ............. 54" x 96" .............. 279.56155080PF ............. 60" x 96" .............. 284.09
9
Order No. Door Size152090PF ............. 24" x 108" ............ 141.21152490PF ............. 28" x 108" ............ 144.03152690PF ............. 30" x 108" ............ 146.11152890PF ............. 32" x 108" ............ 146.80153090PF ............. 36" x 108" ............ 150.23153690PF ............. 42" x 108" ............ 240.38154090PF ............. 48" x 108" ............ 244.73154690PF ............. 54" x 108" ............ 298.14155090PF ............. 60" x 108" ............ 302.67
1560 Commercial Grade Pocket Door Frame for doors1" to 3" thick weighing 200 lbs. (2" x 6" stud wall.)
2710 Fabricated Frame for 1-1/8" to 1-3/8" doors to125 lbs.* (*200 lbs. with 1125 Hanger)
W/1120Order No. PKG.27102068 ........................27102468 ........................27102668 ........................27102868 ........................27103068 ......................91500PPK3 .....................11555PPK3 .....................6–
W/1125*Order No. PKG.27H02068 ........................27H02468 ........................27H02668 ........................27H02868 ........................27H03068 ........................
ORDERING DATAOrder No. Door Size LBS./CASE27102068 2'0" x 6'8" Door 23/127102468 2'4" x 6'8" Door 26/127102668 2'6" x 6'8" Door 27/127102868 2'8" x 6'8" Door 28/127103068 3'0" x 6'8" Door 31/11500PPK3 100 Hrdw. Only 5/10
A “built-up” pocket frame with 10 horizon-tal members for 2 x 4 construction.Removable aluminum track with convexrails, jump proof three wheel (1" dia.)hangers. Brass-tone steel parts. Optionalhanger *#1125 available for doors to200 lbs.
2710
2710Frame
*All listed above contain 1125 ball bearing hangers for doors up to 200 lbs.
15501513
OPT. 1125
1120
100
7'0" Height*Order No. PKG.27102070 ........................27102470 ........................27102670 ........................27102870 ........................27103070 ......................7
8'0" Height*Order No. PKG.27102080 ........................27102480 ........................27102680 ........................27102880 ........................27103080 ........................
Order No.15602668 .......................... (For doors up to 30" wide x 80" tall) ..................... 136.8515603068 .......................... (For doors up to 36" wide x 80" tall) ..................... 141.8915604068 .......................... (For doors up to 48" wide x 80" tall) ..................... 210.8415605068 .......................... (For doors up to 60" wide x 80" tall) ..................... 261.51
15602670 .......................... (For doors up to 30" wide x 84" tall) ..................... 154.3515603070 .......................... (For doors up to 36" wide x 84" tall) ..................... 159.5615604070 .......................... (For doors up to 48" wide x 84" tall) ..................... 228.7315605070 .......................... (For doors up to 60" wide x 84" tall) ..................... 284.62
15602680 .......................... (For doors up to 30" wide x 96" tall) ..................... 167.7215603080 .......................... (For doors up to 36" wide x 96" tall) ..................... 173.1215604080 .......................... (For doors up to 48" wide x 96" tall) ..................... 255.9315605080 .......................... (For doors up to 60" wide x 96" tall) ..................... 314.87
15602690 .......................... (For doors up to 30" wide x 108" tall) ................... 186.8315603090 .......................... (For doors up to 36" wide x 108" tall) ................... 191.8315604090 .......................... (For doors up to 48" wide x 108" tall) ................... 285.1015605090 .......................... (For doors up to 60" wide x 108" tall) ................... 347.58
For 2 x 6 construction. Removablealuminum track with convex rails,rust resistant steel reinforcedwood split studs, jump proof threewheel (1" dia.) ball bearing hangers,self-adjusting floor anchors, headersmarked to cut to smaller door sizes.Brass-tone steelparts.
ORDERING DATAOrder No. Door Size LBS./CASE15602668 2'6" x 6'8" 31/1 (Marked for cutting to 2/0 and 2/4 door)15603068 3'0" x 6'8" 33/1 (Marked for cutting to any size door)1555PPK3 Cnvg. Door Kit 3/10
Specify PKG.15602668 136.8515603068 141.891555PPK3 6.60
1560 1560 1513
100
1550 1125
Single packedplus
screws andinstructions
Ready forinstallationin roughopening.
1560 Series Pocket Door Frame Prices
✓ All the features of the 1500 Series.✓ All frames fit 2" x 6" stud walls✓ All 1560 Frames include 1125 Ball Bearing Hangers.✓ 1560 Frames can accommodate doors up to 3" thick.
10
2511 Pocket Door Frame for 3/4" to 1-3/8" doors to 80 lbs.(150 lbs. with 1025 Hanger*)
2711 Fabricated Frame for 3/4" to 1-3/8" doors to80 lbs.* (150 lbs. with 1025 Hanger*)
ORDERING DATAOrder No. Door Size LBS./CASE27112068 2' 0" x 6' 8" Door 23/127112468 2' 4" x 6' 8" Door 26/127112668 2' 6" x 6' 8" Door 27/127112868 2' 8" x 6' 8" Door 28/127113068 3' 0" x 6' 8" Door 31/12511PPK3 111 Hrdw. Only 3/10
Order No. PKG.27112068 76.6627112468 80.1227112668 81.7727112868 85.1527113068 86.922511PPK3 11.051555PPK3 6.60
A “built-up” pocket frame with 10 horizontalmembers for 2 x 4 construction. Removablealuminum track with convex rails, jump proofthree wheel (3/4" dia.) hangers. Brass-tonesteel parts.
111
15501020
2711*Includes #1025 Hanger available for doors up to 150 lbs.
OPT. 1025
*W/1025Order No. PKG.27H12068 86.9327H12468 90.5327H12668 92.2527H12868 95.7627H13068 97.60
For 2 x 4 construction. Removablealuminum track with convex rails, rustresistant steel reinforced wood splitstuds, jump proof three wheel (3/4" dia.)hangers, self-adjusting floor anchors,headers marked to cut to smaller doorsizes. Brass-tone steel parts.
ORDERING DATA
111
1020
2511
OPT. 1025
*Includes #1025 Hanger available for doors up to 150 lbs.
Order No. Door Size LBS./CASE25112668 2'6" x 6'8" Door 27/1 (Marked for cutting 2/0 and 2/4 door)25113068 3'0" x 6'8" Door 29/1 (Marked for cutting to any size door)2511PPK3 Hardware Set 4/101555PPK3 Converging Door Kit 3/101575PPK3 Adaptor Kit 5/10
1-3/4" Door
Order No. PKG. HDW/1025*25112668 87.26 95.6925113068 89.82 98.282511PPK3 11.051555PPK3 6.601575PPK3 5.81
11
1513
1513
1550
200PD Pocket Door Hardware for single 1-1/8" or larger door to 300 lbs.
100PD Pocket Door Hardware for single 1" or larger door to 125 lbs. (200 lbs. with 1125 Hangers)
ORDERING DATA
A deluxe commercial grade hardware.Can be used for pocket doors or incombination with itself to make specialinstallations of sliding doors. Heavy dutyI-beam aluminum track. Four wheel(1" dia.) ball bearing hangers. Brass-tonesteel parts.
Bulk5/CT.
200 15501513
200PD
Order No. Door Size LBS./CASE200481DR (One 2'0" Door)200601DR (One 2'6" Door)200721DR (One 3'0" Door) 7/1200961DR (One 4'0" Door) 9/1
Order No. PKG. BULK200481DR 88.62200601DR 95.02200721DR 108.48 100.92200961DR 121.32 112.73
100PD
ORDERING DATAOrder No. Door Size LBS./CASE100481DR (One 2'0" Door) 12/5100601DR (One 2'6" Door) 14/5100721DR (One 3'0" Door) 16/5100961DR (One 4'0" Door) 20/5
Order No. PKG. BULK100481DR 27.89 20.53100601DR 31.23 23.32100721DR 34.37 25.86100961DR 40.74 31.79
Can be used for pocket door frames or incombination with itself to make specialinstallations of sliding doors. Aluminumtrack with convex rails, jump proof threewheel (1” dia.) hangers assure a smoothquiet operation. Brass-tone steel parts.Optional hanger #1125 available for doorsto 200 lbs. – Add __.__ (Bulk Only).
1513
100
1550
Clear wrapwith
instructions
Bulk25/CT.
12
1120
2020 Hanger2021 Door Plate
2800F Double Fascia Open Pocket Hardwarefor a single 1-3/8" or 1-3/4" door to 75 lbs.
2800 Pocket Door Hardware for a single1-1/8" door or larger to 50 lbs.
111PD Pocket Door Hardware for single 3/4" or largerdoor to 80 lbs. (150 lbs. with 1025 Hangers)
Can be used for pocket door frames or incombination with itself to make specialinstallations of sliding doors. Aluminumtrack with convex rails, jump proof threewheel (3/4" dia.) hangers assure a smoothquiet operation. Brass-tone steel parts.Optional hanger #1025 available for doorsto 150 lbs. – Add _.__ (Bulk Only).
Order No. Door Size LBS./CASE111481DR (One 2'0" Door) 8/5111601DR (One 2'6" Door) 9/5111721DR (One 3'0" Door) 10/5111961DR (One 4'0" Door) 12/5
Order No. PKG. BULK111481DR 18.44 14.84111601DR 20.27 16.43111721DR 22.08 18.09111961DR 26.00 21.50
ORDERING DATA
Bulk25/CT.
111PD
13
111 Track 1513
1712
1550
1020
Space saving, header mounted “OpenPocket Door” hardware set. Aluminumdouble fascia track with a single convexrail, twin wheel (7/8" dia.) ball bearinghangers, wall mount guide. Brass-tonesteel parts.
ORDERING DATAOrder No. Door Size LBS./CASE2800F481 (One 2'0" Door)2800F601 (One 2'6" Door)2800F721 (One 3'0" Door) 20/52800F961 (One 4'0" Door) 25/5
Order No. PKG. BULK2800F481 34.012800F601 38.402800F721 47.87 42.122800F961 56.25 50.97
Bulk20/CT.
2800F1513
12
2800F 2815
Order No. PKG. BULK2800481D 12.132800601D 13.482800721D 18.51 14.742800961D 21.77 17.25
An economical aluminum track with asingle convex rail, which provides onepoint contact between wheel and track.One wheel (7/8" dia.) hanger. Brass-tonesteel parts.
ORDERING DATAOrder No. Door Size LBS./CASE2800481D (One 2'0" Door)2800601D (One 2'6" Door)2800721D (One 3'0" Door) 9/52800961D (One 4'0" Door) 11/5
Bulk25/CT.
2802 1513
2800 1550
2800Clear
wrap withinstructions
1510/11 Universal Pocket Door FrameJamb Kit. (for 4-9/16" walls)
2850 Pocket Door Hardware for a single1-1/8" door or larger to 50 lbs.
1521 (for 1-3/8" doors only)1534 (for 1-3/4" doors only)
Pocket Door PrivacyLocks and PassageLatches.
Order No. PKG. BULK2850481D 10.412850601D 11.392850721D 16.02 12.352850961D 18.49 14.12
Bulk25/CT.
ORDERING DATAOrder No. Door Size LBS./CASE2850481D (One 2'0" Door)2850601D (One 2'6" Door)2850721D (One 3'0" Door) 11/52850961D (One 4'0" Door) 14/5
An economical painted steel track with asingle convex rail, which provides onepoint contact between wheel and track.One wheel (7/8" dia.) hanger. Brass-tonesteel parts.
2802 1513
2850
2850
1550
Clearwrap with
instructions
A fast convenient method of finishing aPocket Door Frame. Just cut to length andinstall-no ripping of special thicknessstock. Presanded so finishing is a snap.(Since a wide variety of casings areavailable, they are not included.)Cannot be used with 2000 Series Frame.
Order No. Door Size LBS./CASEPrimedFinger JointClear Pine15103068 3'0" x 6'8" 20/3Clear PineVeneer15113068 3'0" x 6'8" 22/3
Order No. PKG.15103068 46.4415113068 64.66
1510/11
ORDERING DATA
14
150 Edge PullFinished in US3 (Bright
Brass) and USD 26(Satin Chrome).
See pages 25, 26.
Privacy locks fit in standard 2-3/8" backset, 2-1/8" bore with a 15/16" end borefor latch bolt. Lock features automaticlatching when closed, simple touch-of-a-button locking with emergency releaseand non-handed. Ideal for convergingdoors. Available in three finishes US3-Bright Brass, US5-Antique Brass, andUS26D-Satin Chrome.
ORDERING DATA
Order No. LBS./CASE1521 Suncrest PRIVACY 2.5/5
Order No. PKG. BULK1521 Suncrest 21.20 19.2921-PPK Dummy Pull 7.49 6.43
Bulk25/CT.
1521 "Suncrest"Lock
Privacy locks fit in standard 2-3/8" backset, 2-1/8" bore with a 15/16" dia. endbore for latch bolt. Lock features auto-matic latching when closed, simpletouch-of-a-button locking with emer-gency release and non-handed. Ideal forconverging doors. Available in three deco-rator finishes; US3-Bright Brass, US5-Antique Brass, and US26D-Satin Chrome.
Order No. LBS./CASE1534 Suncrest PRIVACY .6/1
Order No. PKG. BULK1534 Suncrest 28.83 23.89134 Dummy Pull 8.59
Bulk5/CT.
1534 “Suncrest”Lock
134 “Suncrest”Dummy Pull
21-PPK "Suncrest"Dummy Pull
ORDERING DATA
200SD Heavy Duty Bypass Track for 1-1/8" or largerdoors to 300 lbs.
ORDERING DATA
A deluxe commercial grade hardware.Heavy duty extruded aluminum I-beamtrack. Four wheel ball bearing hangerswith machine turned 1" wheels. Heavyduty guide with steel reinforced nylonposts. Brass-tone steel parts. (Minimumdoor thickness is 1-1/8".)
Order No. PKG. BULK200482DR 175.56200602DR 188.36200722DR 208.82 200.16200962DR 229.65 223.782001443D 342.28
Order No. Opening LBS./CASE200482DR 48"-2 Door200602DR 60"-2 Door200722DR 72"-2 Door 14/1200962DR 96"-2 Door 17/12001443D 144"-3 Door 2155 30 US3
Bulk5/CT.
200SD
200
2031Heavy Duty
Single Guide(3 included)
100SD Heavy Duty Bypass Track for 1" or larger doorsto 200 lbs.
ORDERING DATA
A commercial-grade bypass sliding doorhardware set for doors weighing up to200 pounds each. Heavy-duty extrudedaluminum box track utilizes three-wheeled ball-bearing rollers (part #1125)with 1" diameter machine turned wheels.The three piece guide is adjustable for dif-ferent thicknesses of doors. (Minimumdoor thickness is 1".)
Order No. PKG. BULK100482DR 72.02100602DR 77.60100722DR 82.60100962DR 94.541001443D 145.00
Order No. Opening LBS./CASE100482DR 48"-2 Door100602DR 60"-2 Door100722DR 72"-2 Door100962DR 96"-2 Door1001443D 144"-3 Door
Bulk10/CT.
100SD
2155
30 Pull100 Track
(2 Pcs. Track)
101 Guide
1125 Hanger(1” Dia.)
1712Wrench
15
2020 Hanger2021 Door Plate
111SD Heavy Duty Bypass Track for 3/4" or largerdoors to 150 lbs.
ORDERING DATA
A commercial-grade bypass sliding doorhardware set for doors weighing up to150 pounds each. Heavy-duty extrudedaluminum box track utilizes three-wheeled ball-bearing rollers (part #1025)with 3/4" diameter machine turnedwheels. The three piece guide is adjust-able for different thicknesses of doors.(Minimum door thickness is 3/4".)
Order No. PKG. BULK111482DR 53.91111602DR 57.09111722DR 60.41111962DR 67.231111443D 104.23
Order No. Opening LBS./CASE111482DR 48"-2 Door111602DR 60"-2 Door111722DR 72"-2 Door111962DR 96"-2 Door1111443D 144"-3 Door
111SD
2155 30 Pull
101Guide
1025 Hanger(3/4” Dia.)
1712Wrench
111 Track(2 Pcs. Track)
Bulk10/CT.
ORDERING DATA
138F
1155 Stops inc.w/4 dr. sets
2135 2155
30 US3
1120Bulk
10/CT.
138F Heavy Duty Bypass Track for 1-3/8"doors to 125 lbs.* (200 lbs. with 1125 Hangers)
Commercial grade aluminum fascia trackwith line design to hide fingerprints andscratches. Three wheel (1" dia.) hangersride on convex rails for a smooth quietoperation. Four way adjustable floorquide. Brass-tone steel parts. Optionalhanger *#1125 available for doors to200 lbs. – Add __.__ for 2 Door Set /Add __.__ for 4 Door Set (Bulk Only).
Order No. Opening LBS./CASE138F482D 48"-2 Door 22/5138F602D 60"-2 Door 26/5138F722D 72"-2 Door 30/5138F964D 96"-4 Door 26/3
Order No. PKG. BULK138F482D 55.90 48.25138F602D 62.51 54.80138F722D 69.22 61.13138F964D 109.38 96.49
138F
16
Optional Hanger 1125
2134
1155 Stops incl. w/4 dr. sets
ORDERING DATA
134F
2155
30 US3
1120
Commercial grade track with analuminum fascia which hides hangersfrom view. Three wheel (1" dia.) hangersride on convex rails for a smooth quietoperation. Door guide is woodtone withpivot action that align guide post withdoor. Brass-tone steel parts. Optionalhanger #1125 available for doors to200lbs. – Add __.__ for 2 Door Set /Add __.__ for 4 Door Set (Bulk Only).
Order No. Opening LBS./CASE134F482D 48"-2 Door 24/5134F602D 60"-2 Door 29/5134F722D 72"-2 Door 33/5134F964D 96"-4 Door 30/3Order No. PKG. BULK134F482D 59.81 52.14134F602D 67.51 59.76134F722D 74.43 66.31134F964D 116.71 103.75
Bulk10/CT.
134F
134F Heavy Duty Bypass Track for 1-3/4" doorsto 125 lbs. (200 lbs. with 1125 Hangers)
17
1155 Stops inc.w/4 dr. sets
ORDERING DATA
118F
2118
2155
30 US3
1020
Commercial grade aluminum fascia trackwith line design to hide scratches and holdpaint. Three wheel (3/4" dia.) hangers rideon convex rails for a smooth quietoperation. Mount or dismount doors witha flip of the clip. One inch high woodtoneadjustable door guide. Brass-tone steelparts.
*Optional Hanger 1025 available for doorsto 150 lbs. – Add __.__ for 2 Door Set /Add __.__ for 4 Door Set (Bulk Only).
Order No. Opening LBS./CASE118F482D 48"-2 Door 17/5118F602D 60"-2 Door 21/5118F722D 72"-2 Door 24/5118F964D 96"-4 Door 34/5
Order No. PKG. BULK118F482D 46.50 41.64118F602D 51.58 46.52118F722D 56.99 51.44118F964D 89.15 82.20
Bulk20/CT.
118F Heavy Duty Bypass Track for 1-1/8" doorsto 80 lbs.* (150 lbs. with 1025 Hangers)
118F
Optional Hanger 1025
Optional Hanger 1125
15
2200F
2238
2135
2200F Bypass Fascia Track for 1-3/8" doors to 50 lbs.(One Wheel) or 75 lbs. (Two Wheel)
An aluminum fascia track with “Hi-Lite”design to hide blemishes that may occur.Convex track rails that provide one pointcontact between wheel and track.Hangers include one or two wheel(7/8" DIA.) with three point locking.Hangers adjust without removing orrelocating screws. Woodtone guideadjusts laterally for quick plumbing.Nylon guide posts are 1" high, guide postsswivel to allow warped doors to operatewithout binding. Brass-tone steel parts.
ORDERING DATAOrder No. Opening LBS./CASE
2200F481 48" 2 Door 13/52200F601 60" 2 Door 15/52200F721 72" 2 Door 16/52200F961 96" 4 Door 26/5
*2200F482 48" 2 Door 14/5*2200F602 60" 2 Door 16/5*2200F722 72" 2 Door 18/5*2200F962 96" 4 Door 27/5
Order No. PKG. BULK2200F481 22.33 19.122200F601 26.03 22.282200F721 30.09 25.502200F961 48.95 42.67
*2200F482 25.47 22.21*2200F602 29.17 25.37*2200F722 33.23 28.59*2200F962 55.23 49.41
Bulk25/CT.
Two doorcontents shown
2255 stop kitincl. with 4 dr. sets
*2228 Optional
Clear wrapwith instructions
* 2 Wheel Hangers2200F
18
2255 stop kit incl.with 4 dr. sets
15
2204F Bypass Fascia Track for 3/4"doors to 50 lbs.
An aluminum fascia bypass track to beused with 3/4" plywood or particle boarddoors. Same features as the 2200FSeries.
ORDERING DATAOrder No. Opening LBS./CASE2204F481 48" 2 Door2204F601 60" 2 Door2204F721 72" 2 Door 15/52204F961 96" 4 Door 22/5
Bulk20/CT.
2175
Two door contents shown
2204F
2238
2204F
Order No. PKG. BULK2204F481 20.182204F601 23.062204F721 31.76 25.952204F961 52.21 43.81
15
ORDERING DATA
2222 Bypass Track with Wood Header for 1-3/8"doors to 50 lbs. (One Wheel) or 75 lbs. (Two Wheel)
Order No. Opening LBS./CASE22224814 48" 2 Door ---22226014 60" 2 Door ---22227214 72" 2 Door ---22229614 96" 4 Door Bulk
*22224824 48" 2 Door Only*22226024 60" 2 Door 10/CT.*22227224 72" 2 Door ---*22229624 96" 4 Door ---Order No. PKG. BULK
22224814 29.2722226014 34.8122227214 40.2922229614 61.58
*22224824 32.36*22226024 Track 37.90*22227224 Only 43.38*22229624 Pg. 23 68.32
Prefabricated header with aluminum trackreplaces the regular head jamb. Keeps thebypass doors the same trim height asswinging doors. Eliminates odd doorheights. Convex track rails, 7/8" dia.wheels, adjustable hangers, adjustableguide. Brass-tone steel parts. Also avail-able for 5-1/4" jambs and without wood.Contact factory
2238
222821352255 stopkit inc. with 4 dr. sets
2222
2222 *
2200 Bypass Track for 3/4" or 1-3/8" doorsto 50 lbs.
ORDERING DATAOrder No. Opening LBS./CASE2200482D 48" 2 Door 10/52200602D 60" 2 Door 12/52200722D 72” 2 Door 13/52200964D 96" 4 Door 19/5
Aluminum bypass track with convex trackrails for quiet smooth operation. Onewheel (7/8" dia.) hangers with three pointlocking provide one point contactbetween wheel and track. One inch highwoodtone adjustable door guide.Brass-tone steel parts.
Order No. PKG. BULK2200482D 17.48 14.342200602D 19.94 16.462200722D 22.50 18.542200964D 39.30 33.48
Bulk25/CT.
Two doorcontents shown
Clear wrapwith instructions
2255 stop kitincl. with 4 dr. sets
2135
15
2200
2216
2238
2200
19
Bulk25/CT.
1166 Bypass Track for 3/4" or 1-3/8" doorsto 50 lbs.
An economical prefinished gold coloredsteel bypass track with convex track rails,which provide one point contact betweenwheel and track. One wheel (7/8" dia.)hangers with three point locking. One inchhigh woodtone adjustable door guide.Brass-tone steel parts.
ORDERING DATA
Order No. PKG. BULK1166G482 15.63 12.851166G602 18.17 14.611166G722 20.67 16.341166G964 38.47 30.42
2135
Two doorcontentsshown
15
2216
1166
2238
2255 stopkit incl. with4 dr. sets
1166
Clearwrap with
instructions
Order No. Opening LBS/Case1166G482 48" 2 Door 13/51166G602 60" 2 Door 16/51166G722 72" 2 Door 18/51166G964 96" 4 Door 26/5
1138 Bypass Track for 1-3/8" doors to 50 lbs.
An economical prefinished gold coloredsteel bypass track with convex track rails,which provide one point contact betweenwheel and track. One wheel (7/8" dia.)hangers with three point locking. Oneinch high woodtone adjustable doorguide. Brass-tone steel parts.
ORDERING DATAOrder No. Opening LBS./CASE1138482D 48" 2 Door 13/51138602D 60" 2 Door 16/51138722D 72" 2 Door 19/51138964D 96" 4 Door 27/5
Order No. PKG. BULK1138482D 16.70 13.241138602D 19.35 15.131138722D 21.95 16.951138964D 38.80 31.10
Bulk20/CT.
2135
2238
Clearwrap with
instructions
2255 stop kitincluded with 4 door
sets
Two doorcontentsshown
1138
1138
15
20
An economical prefinished gold coloredsteel bypass track with a “Snap-onFascia”. Convex track rails, which provideone point contact between wheel andtrack. One wheel (7/8" dia.) hangers withthree point locking. Woodtone adjustabledoor guide. Brass-tone steel parts.
ORDERING DATAOrder No. Opening LBS./CASE113FG481 48" 2 Door 19/5113FG601 60" 2 Door 23/5113FG721 72" 2 Door 27/5113FG961 96" 4 Door 38/5
Order No. PKG. BULK113FG481 20.97 18.55113FG601 24.45 21.71113FG721 28.29 24.77113FG961 46.67 41.17
Bulk20/CT.
2135
2238
2255 stop kit includedwith 4 door sets
1138Two door
contents shown
113F
15
113F Bypass Track with Fascia for 1-3/8" doorsto 50 lbs.
126F
DESCRIPTION PART TRACK MAX. DOOR MAX. DOOR SETNO. LENGTH WIDTH (ea.) WEIGHT (ea.) PRICE
200M0723 70" 24" x 3 300 lbs. 360.39(1829mm) (610mm x 3) (136 kg.)
200M0963 94" 32" x 3 300 lbs. 410.36(2438mm) (813mm x 3) (136 kg.)
200M1083 106" 36" x 3 300 lbs. 464.10(2692mm) (914mm x 3) (136 kg.)
200M1443 142" 48" x 3 300 lbs. 516.43(3657mm) (1219mm x 3) (136 kg.)
DESCRIPTION PART TRACK MAX. DOOR MAX. DOOR SETNO. LENGTH WIDTH (ea.) WEIGHT (ea.) PRICE
100M0723 70" 24" x 3 200 lbs. 166.57(1829mm) (610mm x 3) (91 kg.)
100M0963 94" 32" x 3 200 lbs. 190.00(2438mm) (813mm x 3) (91 kg.)
100M1083 106" 36" x 3 200 lbs. 223.05(2692mm) (914mm x 3) (91 kg.)
100M1443 142" 48" x 3 200 lbs. 256.42(3657mm) (1219mm x 3) (91 kg.)
Multiple-Door Sliding SetsTypical 3 track layouts for 1-3/8" or 1-3/4" doors.
DESCRIPTION PART TRACK MAX. DOOR MAX. DOOR SETNO. LENGTH WIDTH (ea.) WEIGHT (ea.) PRICE
111M0723 70" 24" x 3 150 lbs. 128.91(1829mm) (610mm x 3) (68 kg.)
111M0963 94" 32" x 3 150 lbs. 148.56(2438mm) (813mm x 3) (68 kg.)
111M1083 106" 36" x 3 150 lbs. 174.96(2692mm) (914mm x 3) (68 kg.)
111M1443 142" 48" x 3 150 lbs. 192.93(3657mm) (1219mm x 3) (68 kg.)
Shown below are typical 3 track layouts for 1-3/8” or 1-3/4" doors. Other doorthicknesses may be used in some situations. Also, more than 3 tracks may beused by extending header and using other track combinations as required. Referto individual catalog pages for weight carrying capacity and hanger typesavailable. No broken carton charges or cutting fees on MD sets.
All nosing and hardware filler supplied by others. Surfacemount shown may be recessed into floor. Spacing anddimensions will vary with other door thicknesses.
Tracks can be cut down for smaller openings.
100MD Series – 200 LB. Doors
200MD Series – 300 LB. Doors
111MD Series – 150 LB. Doors
Bottom Track – Included w/all Sets
100MD Series – Pre-Packaged Hardware Sets – 200 LB. Doors (min. 1" thick)
3-Door Set Contents:3 - 100 Track Lengths3 - 1050 Bottom Guide Lengths6 - 1125 Ball Bearing Hangers6 - 1705 Bottom Door Guides2 - 1155 Track Mount Stops1 - 1712 Adjustment Wrench
200MD Series – Pre-Packaged Hardware Sets – 300 LB. Doors (min. 1-1/8" thick)
3-Door Set Contents:3 - 200 Track Lengths3 - 1050 Bottom Guide Lengths6 - 2020 Ball Bearing Hangers6 - 1705 Bottom Door Guides2 - 2055 Track Stops
111MD Series – Pre-Packaged Hardware Sets – 150 LB. Doors (min. 3/4" thick)
3-Door Set Contents:3 - 111Track Lengths3 - 1050 Bottom Guide Lengths6 - 1025 Ball Bearing Hangers6 - 1705 Bottom Door Guides2 - 1155 Track Mount Stops1 - 1712 Adjustment Wrench
21
2055Track Stop
1050 Track1705 Guide
2020
1050 Track1705 Guide
100 1125
1155 Stop
1050 Track1705 Guide
111 1025
1155 Stop
2054 PLBGMULTI PULL CATCH
2054 PLBG Multi Pull Catch 7.27
6', 8', 9', 12' sets utilizing111-100-200 Hardware Sets
200
14
DOOR PANEL DISPLAYUSING JOHNSON 100 SERIESTRACK AND HARDWARE NO MORE WRESTLING WITH LOOSE PANELS
OR DOORS!Display your doors with easy-to-construct sliding “show walls”. Thesedisplays take up less floor space than the old methods of stacking orleaning doors.
The Door Panel Display uses the same track and hanger system asin the Johnson 1500 Pocket Door Frame and can handle 3'0" doorsup to 200 lbs.
Packed 25 per cartonPER ONE DOOR SET 40.62
1155 Stop (2)
72" Series 100 Track
1125 Hangers (2)
1712 ADJ. Wrench
10 Door Guide (2)
22PANEL DISPLAYS
88TEL-WT Telescoping Table Leg
7700 Fixed Length Gaucho Leg(Non-stock item)
955022PS Pantry Slide
7800 Folding Gaucho Leg(Non-stock item)
8800 Folding Table Leg 88ADJ-WT Adjustable Table Leg
13 Lengths from 19-1/2" to 31-1/2"at 1" intervals.
20/Ctn 29 lbs. List each 11.97
Part No. Length Pkg/Qty. Weight List ea.78245-WT 24-1/2" 20/Ctn 23 lbs 7.3278255-WT 25-1/2" 20/Ctn 24 lbs 8.1178265-WT 26-1/2" 20/Ctn 25 lbs 8.1178275-WT 27-1/2" 20/Ctn 26 lbs 8.1178285-WT 28-1/2" 20/Ctn 26 lbs 8.1178295-WT 29-1/2" 20/Ctn 27 lbs 8.1178305-WT 30-1/2" 20/Ctn 28 lbs 8.11
STOCK LENGTHS
Part No. Length Pkg/Qty. Weight List ea.88265-WT 26-1/2" 20/Ctn 28 lbs 8.5788275-WT 27-1/2" 20/Ctn 28 lbs 8.5788285-WT 28-1/2" 20/Ctn 29 lbs 8.5788295-WT 29-1/2" 20/Ctn 29 lbs 8.5788305-WT 30-1/2" 20/Ctn 30 lbs 8.57
STOCK LENGTHS
20/Ctn 29 lbs. List each 11.97
Lengths when open from 26" to 31-1/2"preset at 1/2" intervals.Closes to 19".
Standard length 22", opens to 38".Can be special ordered to other lengths.
Custom lengths from 6" to 24"at 1/2" intervals.
6" to 12" –– 40/Ctn 4.1712-1/2" to 18" –– 20/Ctn 4.8818-1/2" to 24" –– 20/Ctn 5.66 List each 10.21 10/Ctn
TABLE LEGS
1138 20/cs
Steel
47" 59" 71" 94" 106" 120" 144" 192" 7.71 9.60 11.42 15.27 20.08 20.08 23.72 30.99
1166 25/cs
Steel
47" 59" 71" 94" 106" 120" 144" 192"7.36 9.12 10.85 14.68 17.31 19.59 23.46 31.34
126F* 25/csFASCIA W: 31/32" GOLDTONESteel H: 2 15/32" WOODTONE
1/4X
48" 60" 72" 96" 106" 120" 144" 192"5.31 6.58 7.82 10.07 14.41 14.41 18.50 26.01
1700 25/cs W: 7/8" H: 13/16"
GOLDTONESteel WOODTONE
24" 30" 32" 36" 48" 60" 72" 96"
2.75 3.34 3.79 3.88 4.96 6.10 7.25 10.32
1777 25/csAluminum W: 1 3/4"(No wood) H:11/16"
24" 30" 32" 36" 48" 60"4.22 5.05 5.30 5.73 7.69 9.35
72" 96" 106" 120" 144" 192"
11.02 14.47 18.07 18.07 21.33 28.02
1825 25/cs
1838 W: 7/8" WOODTONE
Steel H:17/32" WHITE
24" 30" 32" 36" 48" 60" 72" 96"2.28 2.77 3.19 3.19 4.03 4.92 5.82 8.28
1855* 25/cs
W: 1 11/32" WOODTONESteel H: 9/16" WHITE
24" 30" 36" 48" 60" 72" 96"
3.17 3.87 4.53 5.83 7.17 8.51 11.61
2200 25/cs W: 1 7/8"
Aluminum H: 1 1/8" 1/4X
47" 59" 71" 94" 106" 120" 144" 192"8.85 10.97 13.05 17.74 22.74 22.74 26.86 35.23
100 25/cs
Aluminum
36" 48" 60" 72" 96" 106" 120" 144" 192"8.76 11.47 14.26 16.80 22.73 29.27 29.27 35.27 45.36
111 25/cs
Aluminum
36" 48" 60" 72" 96" 106" 120" 144" 192" 5.60 7.22 8.81 10.47 13.88 18.73 18.73 22.15 28.20
118F 20/cs
Aluminum 1/4X
48" 60" 72" 96" 106" 120" 144" 192"20.82 25.70 30.62 40.09 50.63 50.63 60.20 79.72
134F 10/cs
Aluminum 1/4X
48" 60" 72" 96" 106" 120" 144" 192" 30.30 37.92 44.47 59.61 76.15 76.15 90.26 118.74
138F 10/cs
Aluminum 1/4X
48" 60" 72" 96" 106" 120" 144" 192" 26.85 33.40 39.73 53.22 68.12 68.12 80.93 105.97
170A 20/cs
Aluminum
24" 30" 32" 36" 48" 60"3.46 4.25 4.48 4.96 6.41 7.9372" 96" 106" 120" 144" 192"9.46 12.58 15.89 15.89 18.89 25.01
200 5/CSW: 1 7/8"
Aluminum H: 1 5/16"
48" 60" 72" 96" 106" 120" 144" 192"28.27 34.67 40.57 52.38 67.58 67.58 80.23 104.05
1050 6/cs W: 5/8"
H: 5/8"
Aluminum (Actual Size)
72" 96" 106" 144"8.20 10.43 13.09 15.29
2200F 25/cs W: 2 13/16"
Aluminum H: 1 5/8" 1/4X
48" 60" 72" 96" 106" 120" 144" 192"
13.59 16.75 19.97 26.84 34.09 34.09 40.42 53.42
2204F 25/cs W: 1 5/8"
Aluminum H: 1 5/8" 1/4X
48" 60" 72" 96" 106" 120" 144" 192"12.62 15.50 18.39 24.39 30.98 30.98 36.65 48.32
2222 with 4-9/16" wood 10/cswithout wood 25/cs
W: 2 5/35"
H: 2 15/16"
Aluminum 1/4X
48" 60" 72" 96" 106" 120" 144" 192"w/wd 23.91 29.45 34.93 46.18
wo/wd 13.53 16.86 20.11 27.26 34.80 34.80 41.26 54.25
2610F 20/csW: 1 1/8”H: 1 3/32”
48" 60" 72" 96" 106" 120" 144" 192"
29.98 37.48 44.07 58.32 73.56 73.56 87.34 116.12
2800 25/cs W: 1 1/8"
H: 1 3/32"
Aluminum
All lengths are nominal lengths All Tracks Less ScrewsILLUSTRATED 1/2 X (Except 1/4 X where noted)TRACK
2850 25/cs GOLDTONESteel
48" 60" 72" 96" 106" 120" 144" 192"
4.15 5.13 6.09 7.86 10.13 10.13 12.06 15.57
W: 7/8" H: 1 1/16"
2800F 20/cs
Aluminum 1/4X
48" 60" 72" 96" 106" 120" 144" 192"
17.80 22.09 25.91 34.76 44.21 44.21 52.21 69.08
W: 2 5/64"H: 1 11/16"
W: 2 5/35"H: 2 15/16"
48" 60" 72" 96" 106" 120" 144" 192"
5.87 7.22 8.48 10.99 14.15 14.15 16.78 21.73
23
1104.65
1007.80
1120.50
2246.74905.52
1212.69599.94
1034.05305.58
2273.99916.42
1239.94610.84
3194.211188.78
1253.50501.40
983.80249.38
956.91438.00
3230.71
1290.00
302.90
401.4592.60
304.85
234.45
MERCHANDISER CENTERS
GONDOLA ASSORTMENTS
WALL-MOUNTFor pegboards,gondolas, etc.
G60
Contains wire grid,vertical aisle header,and DIY literature.
G40 (GONDOLA NOT INCLUDED)
• G1738 COMBINATION SLIDING-FOLDING DOOR ASSORTMENT5–1700363H, 10–1700486H, 5–1700606H, 5–1700726H, 10–1138482D, 5–1138602D,5–1138722D
• G2200F SLIDING DOOR ASSORTMENT20–2200F481, 10–2200F601, 10–2200F721
• G9000 CLOSET ROD AND SHELF SUPPORT ASSORTMENT10–9018–30P, 20–9030–48P, 10–9048–72P, 5–9072–96P, 5–9072120P,20–9003WHEN, 20–9005WHEN, 20–9030PPK3
G40 4' MODULAR COMB. SLIDING–FOLDING–POCKET–REPLACEMENT G40ASSORT. (CONSISTS OF THE FOLLOWING G41 AND G42 2-FT. MODULAR SETS) G40 MINI*
G41 2' COMBINATION SLIDING–FOLDING–POCKET ASSORTMENT G415–1166G482, 5–1166G602, 5–1166G722, 5–100721DR, 2–153068PF, 5–1700363H, G41 MINI*5–1700486H, 5–1700606H, 5–1700726H
G42 2' ACCESSORY ASSORTMENT G425–1601218P, 5–2216PPK2, 5–2238PPK2, 5–2136PPK1, 5–1836PPK1, 10–2376PPK2, G42 MINI*10-2378PPK2, 10–2336PPK2, 10–2338PPK2, 10–2135PPK1, 10–1832PPK3, 10–1817PPK3,10–1808PPK1, 5-1555PPK3, 5–15213PK1, 10–150–3PK1, 5–1500PPK3, 5–1700PPK3, 10–1703PPK2, 10–1805PPK2, 10–15–3PPK3, 10–33--PPK2, 10–2155PPK1,5–1575PPK3, 10–2312PPK1, 10–1833PPK3
G44* (SAME AS G40 EXCEPT W/2200 ALUMINUM TRACK) G44*G44 MINI*
G45* (SAME AS G41 EXCEPT W/2200 ALUMINUM TRACK) G45*
G45 MINI* G60
G60 6' MODULAR COMB. SLIDING–FOLDING–POCKET–REPLACEMENT G60ASSORTMENT G60 MINI*(CONSISTS OF THE FOLLOWING G61, G62 AND G63 2–FT. MODULAR SETS)
G61 2' COMBINATION SLIDING-FOLDING ASSORTMENT G6110–1166G482, 5–1166G602, 5–1166G722, 5–1700363H, 10–1700486H, 5–1700606H, G61 MINI*5–1700726H, 5–100721DR
G62 2' ACCESSORY ASSORTMENT G625–1601218P, 5–2216PPK2, 5–2238PPK2, 5–2136PPK1, 5–1836PPK1,10–2376PPK2, G62 MINI*10–2378PPK2, 10–2336PPK2, 10–2338PPK2, 10–2135PPK1, 10–1832PPK3, 10–1817PPK3,10–1808PPK1, 5–1700PPK3, 10–1703PPK2, 10–1805PPK2, 10–15–3PPK3, 10–30–3PPK2,10–2155PPK1, 10–2312PPK1, 10–1833PPK3, 10-38-3PPK1, 10-35-3PPK2,10-40-3PPK3, 10-33--PPK2, 36--PPK2, 10-1823PPK2
G63 2' POCKET DOOR FRAME AND ACCESSORY ASSORTMENT G634–153068PF, 3–15113068, 10–150–3PK1, 10–1555PPK3, 10–1575PPK3, 5–21–3PPK2, G63 MINI*5–15213PK1, 5–1500PPK3
G64* (SAME AS G60 EXCEPT W/2200 ALUMINUM TRACK) G64
G65* (SAME AS G61 EXCEPT W/2200 ALUMINUM TRACK) G65
MINI 1601 FULL ACCESS FOLDING DOOR HARDWARE10–1601218P SETS AND WORKING DISPLAY MODEL
W10 COMBINATION UNIVERSAL SLIDING/FOLDING REPL. PARTS W105 EA. – 2216, 2238, 2136, 1836 • 10 EA. – 2376, 2378, 2336, 2338, 2135, 1832, 1817, W10 MINI *1808, 2312, 1833
W11 UNIVERSAL SLIDING DOOR REPLACEMENT PARTS5 EA. – 2216, 2238, 2136, 2156, 2155, 2312, 15–3, 10 EA. – 2376, 2378, 2336, 2338, 2135
W12 UNIVERSAL FOLDING DOOR REPLACEMENT PARTS5 EA. – 33, 1836 • 10 EA. – 1832, 1817, 1808, 1823, 1703, 1805, 1833
*Mini Assortments include two of each item.
LISTPRICE
24
2226PPK2HANGER1/16" OFFSET
2228PPK2HANGER3/8" OFFSET
2238PPK2HANGER3/8" OFFSET
2255PPK3STOP KIT4 DR.
2312PPK1UNIV. HGR.7/8" WHL VTRK
2336PPK2UNIV. “V”1/16" OFFSET-3/4" WHL
2338PPK2UNIV. “V”3/8" OFFSET-3/4" WHL
2376PPK2UNIV. “V”1/16" OFFSET-7/8" WHL
2378PPK2UNIV. “V”3/8" OFFSET-7/8" WHL
2511PPK3 HDWR. SET
2802PPK2HANGER
1832PPK3UNIVPIVOT
1833PPK3UNIVSNUBBER
1836PPK1CARPETRISER (Folding Doors)1875PLBGPIVOTS
1934PPK3CUPBOARDHDWR.
2006 PLBGWALL MOUNTBRACKET
2050PLBGCONVDR. KIT
2135PPK1GUIDE
2136PPK1CARPETRISER (Sliding Doors)
2155PPK1BUMPER
2156PPK3GUIDE/CARPETRISER SET
2216PPK2HANGER1/16" OFFSET
107PIV-S
109 PIV-S PIVOT SET
118 PIV-S PIVOT SET
119 PIV-S PIVOT SET
209 PIV-S PIVOT SET
1120 PPK1 HANGER 1" WHEEL
1125 PPK1 BALL BRG.
1500PPK3 HDWR. SET
1505PPK3 GUIDE/ BUMPER
1506PPK2 HINGES
1555PPK3 CONV. DOOR KIT
3.5/106.14
2 Ea./Pak
3.7/106.16
2 Ea./Pak
2.6/103.72
2 Ea./Pak
2/106.61
1 Set/Bag
3/106.04
1 Ea./Pak
2/103.96
2 Ea./Pak
2/103.97
2 Ea./Pak
2/103.89
2 Ea./Pak
2.2/103.90
2 Ea./Pak
6/10
11.051 Set/Pak
3.7/10
6.992 Ea./Pak
3/105.81
1 Set/Pak
3.8/107.85
2 Ea./Pak
4.8/1010.02
1 Set/Pak
3.2/103.98
2 Ea./Pak
1.9/103.87
1 Set/Pak
1.3/107.03
2 Ea/Pak
2.4/103.79
2 Ea./Pak
1.5/104.08
1 Set/Pak
1.2/102.36
1 Set/Pak
2/102.54
1 Set/Pak
2.3/103.66
2 Ea./Pak
3.6/107.29
1 Set/Pak
1575PPK3 1-3/4 ADAPTER KIT
1606PPK2HINGEBRS./BRN.
1700PPK3HDWR.
1703PPK2HINGE
1706PPK3PIVOTS1700
1743PPK2HINGE
1805PPK2HINGE
1806PPK3PIVOTS1825
1808PPK1ALIGNER
1817PPK3BOTTOMPIVOT
1823PPK2HINGE
1825PPK3HDWR.
2 Per Pack
1.82Pr.
2 Per Pack
4.58Pr.
2 Per Pack
3.00Pr.
1 Per Pack
2.35ea.
2 Per Pack
4.58Pr.
1 Per Pack
4.98ea.
15PULL
20PULL
21DUMMY LOCK“SUNCREST”
30PULL
32KNOB
1-3/4" ROUNDWOODTONESTYRENE
3/4" ROUNDBRASS PLATED STEEL
4 Per Pack
2.75Pack
2 Per Pack
2.39Pr.
Per Set
7.49Pr.
2 Per Pack
4.86Pr.
1 Per Pack
10.97ea.
1 10
2 10
1.4 10
.6 10
BUBBLE PACKED PARTS AND ACCESSORIES
PARTS AND ACCESSORIES WEIGHT SHOWN / PACKS PER CASE
LBSKNOBS - PULLS CAT. NO /CT LIST
LBSCAT. NO /CT LIST
1.7 10
1 10
33--PPK2 1.1 10
1-3/8" X 3"PLATED STEEL
1-3/4"WOOD(BIRCH)
1.3 10
5.5/104.88
1 Set/Pak
4/1010.32
1 Set/Bag
2.2/103.70
1 Set/Bag
4/107.89
1 ea./Pak
1.6/127.75
1 ea./Pak
7/107.20
1 ea./Pak
7/1012.77
1 ea./Pak
6/1012.54
1 Set/Pak
.7/102.67
1 Set/Pak
2.7/103.75
2 Ea/Pak
5/10
6.601 Set/Pak
1.3/103.32
1 Set/Pak
.8/10
1.661 Set/Pak
1.4/10
2.451 Ea./Pak
1.4/104.39
1 Set/Pak
1.4/102.61
1 Set/Pak
2.8/1015.47
1 Ea./Pak
10/1011.60
1 Ea./Pak
1.3/10
2.351 Ea./Pak
1.8/10
2.471 Ea./Pak
.8/10
2.711 Ea./Pak
3/103.47
1 Set./Pak
2.5/10
3.672 Ea./Pak
15-3PPK3
20--PPK2
21-3PPK2 US321-5PPK2 US521-26DP2 US26D
30-3PPK2 US330-5PPK2 US530-26DP2 US26D
36--PPK2
35-3PPK2 US335-5PPK2 US535-26DP2 US26D
1-3/4" DIA.WOODTONE
STYRENE
2-1/8"PLATED STEEL
2-1/8"PLATED STEEL
33KNOB
35PULL
36KNOB
38KNOB
40PULL
150EDGEPULL
40-3PPK2 US340-5PPK2 US540-26DP2 US26D
150-3PK1
1.4 10
1.3 10
1-3/8" X 3"PLATED STEEL
DIE CASTBRT. BRASS FINISH
(SATIN CHROMEBULK ONLY
SEE PAGE 26)
ACRYLICADHESIVEBACKED FORMIRRORS
32--PPK1
1-1/2"BRT. BRASS 38-3PPK1 1.5
10
PIVOTSET
Attractively packed in see-thru bubbles mounted on colorfulhanging cards. Customers see what they are getting – dealershave less pilferage. Some items packed in poly bags.
25
10GUIDE
11GUIDE
12GUIDE
13PLUG
14US3PULL - 2-1/8" Dia.Bright Brass
15US3PULL - 3/4" Dia.Bright Brass
15US26D Satin Chrome
20PULL - 1-3/4" Dia.Brown Plastic
21PULL - 2-1/8" Dia.3 Finishes Available
30PULL - 2-1/8" Dia.3 Finishes Available
32KNOBAcrylic
33KNOBBrown
35PULL3 Finishes Available
36KNOBWood
37KNOBWhite
38KNOBBright Brass
40PULL3 Finishes Available
508.2508.2
1005.4
1005.5
10014
254.2
1005.5
1005.3
1004.8
502.7
508.2
1002.5
1002.6
255.5
253.1
253
252.9
1603 White1606 Woodtone HINGE
1701 TOP PIVOT
1702 TOP GUIDE
1703 HINGE
1704 3/4" FLOOR BRACKET
1705 GUIDE
1706 BOTTOM PIVOT - Long
1707 BOTTOM PIVOT
1710 PIVOT LOCK
1711 JAMB BRACKET
1712WRENCH
1713SNUBBER
17141-1/4" FLOORBRACKET
1721TOP PIVOT3/4" Doors
1722TOP GUIDE3/4" Doors
1723BOTTOM PIVOT3/4" Doors
101GUIDE
150EDGE PULLBright BrassSatin Chrome
1001TOP PIVOT
1010PIVOT LOCK
1011FLOORBRACKET
1020HANGER 3/4" Wheel1025 - Ball Bearing
1021 (1020/1025 Door Plate)
1023 SADDLE BRACKET FOR 1020 HNGR.
1121 (1120/1125 Door Plate)
1120 HANGER1125 1" WHEEL Ball Bearing
1155 STOP
1461BOTTOM PIVOTSOCKET
1506 HINGE
1513 BUMPER
1550 GUIDE
1602 White1605 Woodtone DRYWALL HINGE
BULK PARTS WEIGHT SHOWN IN LBS. FOR PACKAGED QUANTITY
PKG1001.7
1001.5
251.1
1001
1002.7
100.7
100.7
50.8
251.4
1005.4
251.3
1003
502.1
1003.6
1003
1004.7
502.2
502.3
252
255
258
259
506
507
1004.5
503.3
1008
50125016
1003.8
502.5
505.4
1001
1002.5
50105010
All items available in plain poly bags.
26
.474
.46
1.05
.507
.704
.193
.198
.383
1.87
1.13
7.94
.346
1.26
.581
.351
1.12
1.26
1.41
3.67
1.39
3.37
3.79
3.33
7.71
.968
1.04
1.23
3.98
10.32
.981
1.75
.944
.232
.381 (pair)
2.10
3.08
1.91
2.77
.578
.805
1.21
3.03
.805
.761
.573
1.51
2.05
.274
.586
3.23
1.45
1.77
1.45
1727BOTTOM PIVOT1-1/8" Doors
1728TOP PIVOT1-3/8" Doors
1729TOP GUIDE1-3/8" Doors
1730BOTTOM PIVOT1-3/8" Doors
1731BOTTOM GUIDE3/4" Doors
1732BOTTOM GUIDE1-1/8" Doors
1733BOTTOM GUIDE1-3/8" Doors
1741SHUTTERBRACKET
1742SHUTTERHANGER
1743SHUTTERHINGE
1744FLOOR BRACKET3/4" High Double
1754FLOOR BRACKET1-1/4" High Double
1771TOP PIVOT3/4" Sidemount
1772TOP GUIDE3/4" Sidemount
1004.3
502.5
253.1
253.5
253.5
254.4
256
2523
10 pr.8.5
2510
2510
259
2529
256
2512
2512
253
253.3
253.3
253.2
253.2
253.2
253.4
252.6
251.1
1004.6
258.2
2511
254.3
254.3
254.2
254.6
251.4
1003.6
252
1008.5
1004.4
1007.5
502.8
505
1001.2
1001.7
1008
1009.3
1003.5
252.3
1773 BOTTOM PIVOT 3/4" Sidemount
1774 BOTTOM GUIDE 3/4" Sidemount
1775 DOORKEEPER
1801 TOP PIVOT/GUIDE 7/16" Dia.
1804 FLOOR BRACKET
1805HINGE
1807BOTTOMPIVOT 7/16" Dia.
18084 DOORALIGNER.
1810PIVOTSOCKET
1811JAMBBRACKET
1812SNUBBER2 DOOR
1814SNUBBER4 DOOR
1815HINGE
1823HINGE
1831TOPPIVOT/GUIDE 3/8" Dia.
1836CARPETRISER
BULK PARTS WEIGHT SHOWN IN LBS. FOR PACKAGED QUANTITY
(
(Folding Doors)
27
1726 25 1.80TOP GUIDE 3.21-1/8" Doors
1724 25 1.49TOP PIVOT 3.21-1/8" Doors
2.07
2.41
1.98
.682
1.44
.66
.67
.568
.951
.978
.235
.257
.721
1.07
.645
1.02
All items available in plain poly bags.
1837BOTTOMPIVOT 3/8" Dia.
1861JAMBBRACKET
1922TOP GUIDE3/4" DOORS
1926TOP GUIDE1-1/8" DOORS
1929TOP GUIDE1-3/8" DOORS
1972TOP GUIDE3/4" SIDEMOUNT
2001TOP PIVOTBIFOLD
2002HANGER/GUIDEBIFOLD
2003Ball BearingHinge (pairs)US3-US5-US26D
2007BOTTOM PIVOTBIFOLD
2010PIVOT LOCKBIFOLD
2011FLOOR BRACKETBIFOLD
2020HANGERBYPASS
2031HEAVY DUTYSINGLE GUIDE
2034 GUIDE 1-3/4"
2035GUIDE1-3/8"
1.48
1.39
1.70
1.38
1.77
1.80
1.70
2.19
4.16
2.50
5.67
6.09
2.08
2.41
.832
.741
1.84
1.88
1.78
2.49
3.37
23.32
9.78
6.69
7.57
4.45
26.69
3.41
4.04
3.88
2680 PLBG 50 1.67END CAPS 2.3
2802 50 2.41HANGER 7.67/8" Wheel
2812 7/8" Whl. 50 3.492815 Ball Brg. 12
50 6.2413
8050 50 5.34SWIVEL 22BRACKET
9027 50 1.231-3/8" ROD 8.5SUPPORT
9028 50 1.14 1" ROD 8.2SUPPORT
9029 50 .521END 9.2BRACKET
9030PLBG 100 .677POLE PRCAPS 5.8
2165 100 1.48STOP 4.4
2175 25 2.28GUIDE 1.83/4" DOORS
2206 100 .813HANGER 7.11/16" Offset
2208 100 .818HANGER 1003/8" Offset
2216 100 .894HANGER 9.71/16" Offset
2226 50 1.76HANGER 7.41/16" Offset
2228 50 1.78HANGER 83/8" Offset
2238 100 .916
HANGER 10.53/8" Offset
2312 50 4.34UNIV. HNGR 11.2V Trk- 7/8" whl.
2551 50 .393POCKET DOOR 1.2GUIDE 1 3/8"
BULK PARTS WEIGHT SHOWN IN LBS. FOR PACKAGED QUANTITY
All items available in plain poly bags.
28
2037 50 2.76GUIDE 131-3/4"
2038 50 2.76GUIDE 131-3/8"
2054 PLBG 10 7.27MULTI PULL 1.5CATCH
2055 25 4.62TRACK STOP 9
2118 25 2.35NYLON GUIDE 2.21-1/8" Doors
2134 25 1.96GUIDE 2.41-1/8” or 1-3/4”Doors
2135 100 1.05GUIDE 7.53/4" or 1-3/8"Doors
2136 100 .956CARPET 4.8RISER (Sliding Doors)
2138 100 .904NYLON GUIDE 1.61-3/8" Door
2155 501 .857STOP 1.6
L.E. JOHNSON PRODUCTS, INC.2100 Sterling Ave. • ELKHART, IN 46516
574-293-5664 • FAX 1-574-294-4697
Information800-837-5664
PRODUCT INDEX
POCKET DOORHARDWARE
WALL MOUNT SLIDINGDOOR HARDWARE
SLIDING BYPASS DOORHARDWARE
MULTI-SLIDING DOORHARDWARE
BI-FOLD DOORHARDWARE
MULTI-FOLD DOORHARDWARE