AMERICAN CHEMICAL TECHNOLOGIES, INC. NEPTUNE® AW … · Typical Wear Performance* Four Ball Wear,...
Transcript of AMERICAN CHEMICAL TECHNOLOGIES, INC. NEPTUNE® AW … · Typical Wear Performance* Four Ball Wear,...
NEPTUNE® AW SERIES FLUIDSNo Sheen, High Performance, Water Soluble Hydraulic Fluids
AMERICAN CHEMICAL TECHNOLOGIES, INC.
Neptune® PAGs last longer and comply with EPA VGP.
Neptune® AW Series lubricants are the only fluid chemistry fully compliant with the 2013 ,PGV U.S. EPA Clean Water Act and U.S. Coast Guard Surface Force Logistics Center EAL Standards. But why stop there? Neptune lubricants outperform fully-saturated synthetic esters, vegetable oils and bio-PAOs. And they last longer in your submerged equipment. That’s a whole lot of upside. L s’tetalk today.
Performance Advantages:
Non-Sheening - Neptune environmentally friendly fluids that pass the U.S Environmental Protection Agency (EPA) 40 CFR 435 Static Sheen Test.
Water Solubility - Neptun
Aquatic Toxicity - According to the U.S. Fish and Wildlife Service, Neptune® AW Series hydraulic
aquatic wildlife.
Biodegradable - Neptune OECD 301B.
Excellent Anti-Wear Performance - Neptune capabilities
o ecnamrofrep raew-itna ))WA( ”raew-itna“ sa detar era yehT .serutarepmet fo egnar ediw a rev
Hydrolytic Stability - Unlike mineral oil and other environmentally friendly fluids, Neptune® AW
against the formation of harmful acids that can damage equipment and lead to premature failure.
High Waste Treatability - ®enutpeNthe discharge of industrial waste streams to unacclimated municipal treatment plants (POTWs),
performance of the waste treatment systems, even at high discharge levels.
Non-Sludge or Varnish Forming - Neptune degrade to form sludge or varnish, extending maintenance intervals and overall service life. This chemistry also contributes to long-term system cleanliness.
Thermal Stability - Neptune®
All-Weather Service - With high viscosity indices and low pour points, Neptune®
replace multiple viscosity grade oils.
Material Compatibility - Neptune®
oils. This allows for the petroleum oil to be easily removed from the system pending the results of a
hydraulic systems. Contact ACT for more detailed compatibility information related to paints, plastics,and elastomers.
NEPTUNE® AW SERIES FLUIDS
fluids according to ASTM D7043 and FZG testing.
Fluid Compatibility - Neptune® AW Series Fluids are fully compatible with other Neptune® lubricants. Neptune® products that meet the 2013 VGP have an ISO Viscosity Grade of 10 to 320.
and leave no surface sheen, eliminating cleanup requirements.
Typical Wear Performance*
Four Ball Wear, ASTM D4172, mm wear scar (1200 rpm, 1 hour, 75°C [167°F], 40kg) 0.40
83 72D MTSA ,tseT PE llaB ruoF Load Wear Index 43 Last Non-seizure, kg 100 Weld Load, kg 200
V104 Vane Pump Test, ASTM D7043 < 5 mg
Eaton Corporation 35 VQ25 Vane Pump Test**
Seal Compatibility (1,000 hr at 100°C [212°F]), HNBR, FKM, Select NBR Pass
**Southwest Research Institute (SWRI)
Typical Environmental Properties*
Neptune® AW Hydraulic Fluids 32 46 68
1B 03DCEO dohteM tseT ytilibadargedoiB ydaeR
Bioaccumulation log Kow OECD117 1.15 (non-bioaccumulative)
Algae LC50 7000 mg/l (relatively harmless)
Daphnid LC50 600 mg/l (practically non-toxic)
Brine Shrimp LC50 700 mg/l (practically non-toxic)
Freshwater fish LC50 800 mg/l (practically non-toxic)
*Typical properties, not to be construed as specifications.
Typical Physical Properties*
Neptune® AW Hydraulic Fluids 32 46 68
Viscosity, ASTM D445 @ 40°C (100°F), cSt 32.93 46.96 67.97
(212°F), cSt C°001@ 7.13 9.88 13.91 @ 0°C (32°F), cSt 245.9 361.5 558.3
70 22D MTSA ,xednI ytisocsiV 188 203 214
Pour Point, °C, ASTM D5950 -46 -40 -35
(68°F), ASTM D4052 C°02@ ytivarG cfiicepS 1.025 1.029 1.038
(lbs/gal) @ 20°C (68°F) thgieW 8.53 8.56 8.64
No-Sheen Performance ComparisonClear visual comparison of fluid sheening characteristics is made possible by adding an illuminating agent to the fluids, then adding the fluids to water under a black light. In a comparison conducted under identical conditions, other fluids quickly formed a visible sheen on the surface when added to water. In contrast, when a Neptune® Series fluid was introduced into water, the fluid sank immediately, leaving no sheen on the surface. The samples were then subjected to significant agitation. The Neptune® Series fluid dispersed completely into the water and, when the agitation stopped, there was still no sheen. When agitation of the other fluids ceased, surface sheens quickly reformed.
Neptune® Series fluid
Ecologically friendly, sheen-free fluids for use in equipment on or near Marine environments.
78% 76% 62%
Pass Industrial (I-286-S), Mobile (M-2950-S)
Fully SaturatedSynthetic Ester
Biobased PAO Vegetable Oil AW 32 Mineral Oil
(kg/l) 1.022 1.024 1.036
American Chemical Technologies, Inc.485 E. Van Riper RoadFowlerville. MI 48836Tele: 517-223-0300Fax: 517-223-1703www.AmericanChemTech.com
® Trademark of American Chemical Technologies.
Ask About the Full Line of Fluids and Lubricants from ACT• EcoSafe® FR Fire Resistant Hydraulic Fluids• EcoSafe® EHC Hydraulic Fluids for the Power Generation Industry• EcoSafe® Revive Premium Turbine Fluid Additive• EcoSafe® TF-25 Turbine Fluid• Neptune® Gear Oil
• EcoGear® Gear Oils
To Learn More Call: 1-800-938-0101Outside of the U.S. and Canada, please call 1-517-223-0300 (USA)
A Global Source for Premium Synthetic Lubricants
American Chemical Technologies, Inc. (ACT) provides premium synthetic lubricants to a wide range of industries. Founded morethan 30 years ago in the U.S., ACT has grown to become an international supplier of highly specialized products for industryand markets through a global network. Our commitment to advanced technology and personal service continues today as weset new standards for product performance and customer satisfaction.
Call on Us for Total Support
We want your experience with our products to be successful. ACTsupports its products with a full range of sales, technical, and customer service support, including information and/or assistanceto help you with product selection, handling, maintenance, and
the condition of all system components. Call ACT today for expert
NEPTUNE® AW SERIES FLUIDS The only fluid chemistry fully compliant with the 2013 VGP, U.S. EPA Clean Water Act and U.S. Coast Guard Surface Force Logistics Center EAL Standards
AMERICAN CHEMICAL TECHNOLOGIES, INC.
To Download Our White Paper Visit:www.NeptuneEALs.com
• Neptune® AW Hydraulic Fluid
For An Authorized Distributor Visit:www.AmericanChemTech.com