alro ol 141
description
Transcript of alro ol 141
-
1.
Chem-Trend L.P.1445 W. Mc.Pherson Park Drive, P.O. Box 860, Howell, MI 48844.0860
Telephone: 517.546.4520 Facsimile: 517.548.5370 US/Canada: 800.727.7730Copyright 2004 Chem-Trend L.P., All Rights Reserved
Safety-Lube 9100
031407
www.chemtrend.com
Benefits Approved for PC and ABS For use at mold temperatures up to
140C/284F Injection mold parts can be lacquered or
otherwise coated
Typical Performance Characteristics
Product description Lusin Alro OL 141 is a silicone-free release agent based on synthetic oils and additives. It is suitable for an application temperature of up to 140C/284F.
Special properties Excellent release and slip effect Long cycle times - multiple demolds possible Subsequent treatment of parts (lacquering,
printing, gluing) possible Application Lusin Alro OL 141 was designed specially for processing polycarbonates and ABS, helps reduce stress cracking and prevents the formation of mold flow lines during the molding process. Suitability tests are available on request. The product is also applicable as a release agent for other thermoplastics. When using, apply a fine spray film to the clean mold. Particular attention should be paid to corners and undercuts. Product should be used in well ventilated areas.
When parts are to be treated, it is recommended that an adhesion test be carried out. If too thick a film is applied, this can lead to difficulties in subsequent treatment processes. Residues of release agent are easily removed using a mixture of water and a cleaner such as Lusin Clean W 81. Storage/Handling For further information on storage, handling, and hazards, please request a copy of Chem-Trend's Material Safety Data Sheet.
Packaging Lusin Alro OL 141 is available in 1-liter, 10-liter, 20-liter and 200-liter containers, as well as aerosol cans (12 cans/case).
While the technical information and suggestions for use contained herein are believed to be accurate and reliable, nothing stated in this bulletin is to be taken as a warranty either expressed or implied.
Appearance Colorless liquid Solid content, % ~3.5 Flash point, C/F < -18;