Alro Industrial Supply · 2020-05-12 · Glass seaming Polishing Portable Belts Portable belts are...

alro.comalro.com

Alro Industrial Supply

alro.comalro.com

Stock Abrasive OfferingsStock Abrasive Offerings

BECAUSE RIGHT CHOICES MATTERTM

https://www.alro.com/


alro.comalro.com2

Depressed Center Wheels ............................................................... 3Small Diameter, Reinforced Cut-Off Wheels .................................. 3Portable Snagging Wheels, Cones & Plugs ................................... 4Bench and Pedestal Wheels ............................................................ 4Mounted Points ................................................................................. 4Dressing Sticks ................................................................................. 5Fiber Discs ........................................................................................ 5Cloth PSA Discs & Accessories ...................................................... 5Flap Discs .......................................................................................... 6Paper Discs ....................................................................................... 6Cloth Sheets and Rolls ..................................................................... 7Paper Sheets and Rolls .................................................................... 7Abrasive Sponges ............................................................................ 7File Belts ............................................................................................ 8NORaX Belts ...................................................................................... 8Portable Belts .................................................................................... 8Narrow Belts ...................................................................................... 9Flap Wheels ....................................................................................... 9Non-Woven Belts ............................................................................ 10Non-Woven Discs ........................................................................... 10Non-Woven Hand Pads, Rolls & Sponges ................................... 11Non-Woven Flap Wheels ................................................................ 11Unified Wheels ................................................................................ 12Convolute Wheels ........................................................................... 12

Stock Abrasive Offerings


alro.comalro.com3

Depressed Center WheelsDepressed center wheels (also referred to as raised hub wheels) are designed to handle tough right angle grinding applications on metal, masonry and other building materials. Wheels are designated by shape “type”. Available in various grit and abrasive options, these wheels cut, grind, remove stock, chamfer edges, bevel and blend with aggressive cut rate and long life.

Applications: ● Grinding ● Beveling ● Cutting

● Edge chamfering ● Stock removal ● Weld blending

SizeRange

2” to 9”

Thickness Range

.040” to .250”

GritRange

24 to 46 grit for stock removal 60, 80, 120 grit for blending and finishing

AbrasiveGrains

• Aluminum Oxide• Ceramic Alumina• Silicon Carbide• Zirconia Alumina

MountingOptions

Plain hole (5/8” and 7/8”)Discard mount (3/8” - 24” and 5/8” - 11”)

Shapes

• Type 27• Type 28• Type 29

Small Diameter, Reinforced Cut-Off WheelsThe Norton small diameter cut-off wheel line consists of Type 01 straight and Type 27 depressed center cut-off wheels from 1-1/2” to 9” diameters. These wheels come in ultra thin .035 for quick burn/burr free cutting to .125” for more durable applications. All are rein-forced for the demanding nature of portable cut-off.

Applications: ● Cutting sheet metal ● Cutting pipe ● Metal plate dimensioning

SizeRange

1-1/2” to 9”

Thickness Range

AbrasiveGrains

• Aluminum Oxide• Ceramic Alumina / Zirconia Alumina• Silicon Carbide• Zirconia Alumina / Alumina Oxide

Shapes

• Type 01 Straight• Type 27 Depressed Center

• .035”• .040”• .045”

• .060”• .090”• .125”

Alro Industrial Supply stocks Norton abrasive products in different specifications for a broad range of applications from heavy duty to light finishing. To learn more about these Norton products and the Alro difference contact Alro Industrial Supply today.



alro.comalro.com4

Mounted PointsResin bond, vitrified bond, center lap, and cotton fiber mounted points are available in a wide range of shapes.

Industries: ● Aerospace ● Automotive ● Construction ● Cutlery ● Foundries

● Metal fabrication ● Mold shops ● Stainless steel equipment ● Tool & Die

Abrasive Grains

• Aluminum Oxide• Ceramic Alumina

• Silicon Carbide• Zirconia Alumina

Shape Availability

A, B and W

Portable Snagging Wheels, Cones & PlugsFor consistent, quality performance in foundries, welding shops, fab-rication facilities, steel mills and shipyards, Norton snagging wheels maximize your productivity. Used on horizontal/straight shaft grinders or right angle cup portable grinders.

Applications: ● Removing flaws ● Clean castings ● Cracks ● Gates

● Rough beveling ● Smooth weld seems,

risers & parting lines

Shape andSize Range

Type 01 Straight Wheels:2-1/2” to 8”

Type 06 & 11 Cup Wheels: 4” to 6”

Cones &Plugs

GritRange

14 to 24

AbrasiveGrains

• Type 16• Type 17• Type 17R

• Type 18• Type 18R

• Aluminum Oxide 57A• Silicon Carbide 37C• Zirconia Alumina NZ

• Aluminum Oxide/Silicon Carbide Blend 57AC• Zirconia Alumina/Aluminum Oxide Blend AZ• Zirconia Alumina/Silicon Carbide Blend AZC

Bench and Pedestal WheelsThe Norton Bench and Pedestal wheel line consists of all wheel di-ameters and arbor sizes, abrasive types and grit sizes – to answer all your metal removal, deburring, shaping and sharpening needs: white aluminum oxide for high speed tool steels, gray aluminum oxide for carbon steel, and silicon carbide for nonferrous metals and carbide tooling.

Applications: Offhand deburring & sharpening of parts & tools

Size Range

5” to 18” dia.

Grit Range

24 to 150

Abrasive Grains

Aluminum Oxide • Silicon Carbide

Bushings: Telescopic arbor bushings to fit all popular grinders are packaged with the wheel



alro.comalro.com5

Fiber DiscsFiber discs are the most classic of grinding product designs using a heavy-duty coated abrasive disc with resin over resin construction on heavy-duty vulcanized fiber backing. Ideal for general purpose applications ranging from heavy stock removal to surface blending used with a back-up pad on portable angle grinders.

Applications: ● Stock removal ● Weld blending ● Rust removal

● Edge chamfering ● Deburring & deflashing ● Cleaning & finishing

Size Range

4” x 5/8” hole4-1/2” to 9-1/8” x 7/8” hole

Grit Range

16 to 120

Abrasive Grains Product Options

Speed-Change hubs (5/8 - 11”)AVOS technology

• Aluminum Oxide• Ceramic Alumina

• Silicon Carbide• Zirconia Alumina

Accessories: Air-cooled and smooth-faced back-up pads

Dressing SticksNorton stationary diamond dressing tools have a reputation for quality and innovative technology. The range includes blade tool dressers, single point dressers and multi point dressers for profiling and straight dressing of all conventional grinding wheel. The tool to choose depends on the dimensions of the wheel to be dressed.

Applications: Truing, cleaning, and dressing diamond, cBN, and conventional abrasive wheels

Thick, Width & Diameter

1/4” to 1”

Grit Range

16 to 400

Abrasive Grains

Aluminum Oxide • Boron Nitride • Silicon Carbide

Shapes

Square & Round

Length

3” to 8”

Cloth PSA Discs & AccessoriesNorton PSA and Merit ShurStik PSA (pressure sensitive adhesive) cloth discs are the traditional metal sanding product on random orbit-al and stationary disc sanders in conjunction with a rubber back-up pad that delivers the rigidity for hard to grind alloys and steels. They offer strong tear and edge-fray resistance.

Accessories: Air-cooled and smooth-faced back-up pads

Size Range

4”dia x 5/8” hole4-1/2” to 9-1/8”dia

x 7/8” hole

Grit Range

16 to 120

Abrasive Grain Product Options

Speed-Change hubs (5/8 - 11”)

AVOS technology


Applications: ● Sanding ● Finishing



alro.comalro.com6

Applications: ● Stock removal ● Weld blending ● Rust removal

● Edge chamfering ● Deburring & deflashing ● Cleaning & finishing

Flap DiscsFlap Discs are versatile grinding and finishing tools, consisting of three main components: a backing plate, adhesive, and abrasive cloth flaps. The rectangular flaps are overlapped and glued to the backing plate. Flap discs are designed for right angle grinder applica-tions ranging from heavy stock removal to surface blending.

SizeRange

4” dia. x 5/8” hole4-1/2” to 7” dia. x

5/8”-11 discard mountand 7/8 hole

GritRange

24 to 120

AbrasiveGrains


AbrasiveFlaps

• Polyester• Cotton

Flap DiscShape

• Type 27 Flat• Type 29 Conical

AbrasiveFlap Density

• Standard• High

Back PlateMaterial

• Aluminum• Fiberglass• Plastic


Applications: ● Stripping and preparing primed and painted surfaces for finishing

● Sanding of all gel coat and body filler compounds ● Sanding plastics, fiberglass and composites ● Preparing and finishing metal ● Bare wood sanding ● Light weld blending

Paper DiscsPaper discs are the traditional dry sanding product for random orbital and rotary sanders. Available in adhesive back and hook & loop at-tachments in a variety of sizes, hole patterns and abrasives types to give you the highest performing and broadest selection for light stock removal to fine finishing on wood, plastic, fiberglass, composite, prim-er and sealers. For maximum dust extraction, our Cyclonic technology extracts 60% more dust for cleaner work surface and environment.

GritRange

36 to 2,500

AbrasiveGrains


AttachmentSystems

• Hook & Loop• PSA - Pressure sensitive adhesive

PaperWeights

• Lightweight A, B and C• Heavyweight E and F

VacuumHoles

See product availability charts

SizeRange

3” to 8”


alro.comalro.com7


Abrasive SpongesNorton hand pads and sponges are super flexible and easy-to-hold when used on curved, contoured or flat surfaces. Designed for dura-bility and versatility, these products typically last longer than traditional sandpaper sheets. Sanding sponges are abrasive-coated foam blocks that can be used in a variety of applications from sanding paint and drywall to deburring, blending and finishing of various materials.

Benefits: ● Can be used wet or dry ● Clog resistant, washable, reusable ● Easy to use, can be folded without cracking ● Generate a consistent surface finish ● Conformable

Cloth Sheets and RollsEngineered for flexibility and fast cutting, cloth sheets and rolls have a longer life than paper. They tear cleanly and straight without shed-ding and are packed in a protective dispenser to eliminate waste and damage.

Applications: ● Scouring and light deburring ● Scale and rust removal ● Blending and fine sanding ● Polishing lathe turnings, rolls and cylinders ● Blending machine tool marks

Sheet Size

9” x 11”

Roll Sizes Grit Range

40 to 6001” to 4”widex 50 yards

Abrasive Grains

• Aluminum Oxide • Emery• Silicon Carbide

Sheet & Roll Categories

All Purpose Aluminum Oxide Cloth,Emery Cloth and Silicon Carbide Screen

Paper Sheets and RollsPaper sheets and rolls are engineered for optimum performance when sanding metal, wood, composites and painted surfaces. The sheets are packed in protective packaging to eliminate waste and permit easy, neat storage.

Applications: ● Light-duty metal sanding ● Filler and primer sanding ● Sanding between sealer coats ● Defect removal from painted surfaces ● Sanding and finishing of composites and fiberglass ● Bare wood sanding

Size Offerings Grit Range

36 to 2,500• Full sheets• Cut sheets• File strips• Rolls

Abrasive Grains


Sheet & Roll Categories

• Heavyweight Zirconia Alumina• Aluminum Oxide & Silicon Carbide• All Purpose Aluminum Oxide and Garnet,• Stearated (non-loading) Ceramic Alumina, • Waterproof Aluminum Oxide and Silicon Carbide


alro.comalro.com8


Applications: ● Light weld removal and blending ● Shape and contour sanding ● Surface preparation prior to coating and plating ● removing cutting tool marks from molds and dies

File BeltsPortable file belt sanders have replaced tedious hand filing and sanding. Increasingly, tool manufacturers are introducing additional fixtures for an increasing number of applications. The belts listed are popular stock sizes, but additional sizes, specifications, backing materials, and edge scallops are available made-to-order.

Size Range

1/8” to 1” wide x 12” to 30” long

Grit Range

40 to 120

Abrasive Grains

Aluminum Oxide • Ceramic Alumina • Zirconia Alumina

Applications: ● Grinding and finishing all metals ● Sanding and finishing wood ● Blending welds ● Glass seaming ● Polishing

Portable BeltsPortable belts are ideal for all your metal and woodworking appli-cations. Choose 36 to 50 grits for rough/heavy-duty applications, 60 to 100 for intermediate, and 100 to 220 for finishing/polishing applications. Stock is available for wood applications and FastTrack service is used for all other applications.

Size Range

3” to 4” wide x 15-1/2” to 24” long

Grit Range

36 to 220

Abrasive Grains

Ceramic Alumina

Applications: ● Polishing and finishing

NORaX BeltsNORaX belts outlast conventional abrasive belts with 2 - 5 times lon-ger life. Longer life, higher quality finishes, faster cut rates, and the ability to skip finishing steps all help drive down the costs of your finishing processes.

Size Range

1/8” to 1” wide x 12” to 30” long

Grit Range

X200 and X100

Abrasive Grains

Ceramic Alumina


alro.comalro.com9

Narrow BeltsA wide selection of belt sizes and grits for most dimensioning, inter-mediate grinding and polishing applications.


Applications: ● Benchstand and backstand belts ● Grinding and deburring of all metals ● Sanding and finishing wood ● Heavy stock removal ● Glass seaming ● Polishing

Size Range

1” to 10” wide x 36” to 132” long

Grit Range

36 to 320

Abrasive Grains

Aluminum Oxide • Ceramic Alumina • Zirconia Alumina

Flap WheelsFlap wheels are an ideal choice for a wide variety of blending, de-burring and finishing applications common in the metal fabrication, welding and polishing industries. Flap wheels are conformable to intricate shapes and contours. Designed to deliver a consistent finish with a uniform rate of cut, flap wheels wear away, continually exposing fresh abrasives.

Applications: ● Blending ● Cleaning ● Deburring

● Finishing ● Polishing ● Stock removal

Size Offering and Ranges Grit Range

40 to 320• Flap Wheels with mounted steel shanks: 3/8” to 3” diameter• Flap Wheels with mounted 1/4-20 thread: 1” to 3” diameter• Flap Wheels with arbor holes: 3” to 16” diameter

Abrasive Grains

• Aluminum Oxide• Ceramic Alumina/Aluminun Oxide

Tool Management Solutions

Alro SmartCell Video - Tool Management Solutions


https://youtu.be/IzyLSNELFGU

alro.comalro.com10

Stock Abrasive OfferingsNon-Woven DiscsMerit and Norton non-woven discs are a combination of strong synthet-ic mesh and quality abrasives, bonded together by a smear-resistant adhesive. They are ideal for use on portable tools to clean and remove imperfections on metal surfaces, clean, deburr or finish a variety of sur-faces, blend weld seams, or create decorative finishes. The open con-struction of the non-woven material enables aggressive cutting action and improved surface finish while maintaining its non-loading feature.

Non-Woven BeltsNorton non-woven belts are a combination of strong synthetic mesh and quality abrasive, bonded together by a smear-resistant adhesive. The open construction of non-woven material enables aggressive cut-ting action and improved surface finish while maintaining its non-load-ing feature. The belts are color-coded by grit size for easy identification. Choose Coarse for deburring, Medium for cleaning/blending, and Very Fine for finishing.

Applications: ● Remove surface defects ● Corrosion, oxides, rust, scale, paints ● Light edge burrs and flashing ● Blend mill and tool marks ● Parting lines and uneven edges ● Applying decorative finishes

Grit Range

Coarse (Brown) • Medium (Maroon) • Very Fine (Blue)

Abrasive Grains

Alumina Oxide • Ceramic Alumina/Alumina Oxide

Applications: ● Rust removal ● Blending ● Beveling ● Buffing ● Polishing

● Medium-light stock removal ● Deburring & deflashing ● Cleaning & finishing ● Surface preperation ● Felt polishing

SizeRange

3/4” to 8”diameter

GritRange

AbrasiveGrains

• Aluminum Oxide• Ceramic Alumina• Silicon Carbide

Attachment

• Quick-Change Type TS (Type II)• Type TR (Type III)• Type TP (Type 1)• Hook and loop• Arbor holes

Back UpPads

Rubber with hardness variations for different applications.

• X-Coarse• Coarse• Medium• Fine• Very fine

SurfaceFinishing

• Surface stripping• Surface deburring and blending


alro.comalro.com11

Non-Woven Hand Pads, Rolls & SpongesSurface finishing hand pads, rolls and sponges are made of a non-woven nylon web impregnated with abrasive grain and resin bond. Non-woven hand pads are flexible to adapt to any work sur-face. Gentle action easily removes flashing or burrs without affecting dimension of workpiece.

Non-woven material is laminated to a long-lasting sponge for the convenience of two pads in one. These sponges are a superior re-placement for steel wool. Non-woven rolls are an economical alter-native to cut pads and can be cut to specific sizes.


Applications: ● Light- to Heavy-Duty cleaning ● Deburring, blending and polishing ● Finishing of metal, wood, composite, plastics,

stone, solid and painted surfaces

Surface Finishing Grit Range

• Surface stripping• Surface deburring & blending

Abrasive Grains

• Aluminum Oxide• Silicon Carbide

• Coarse (C)• Medium (M)

• Non-Abrasive (-)• Fine (F)

• Very Fine (VF)• Ultra Fine (UF)

• Micro Fine (MF)

Non-Woven Flap WheelsNon-woven surface finishing flap wheels are an ideal choice for a wide variety of blending and finishing applications common in the metal fabrication, welding and polishing industries. Flap wheels are conformable to intricate shapes and contours. Designed to deliver a consistent finish with a uniform rate of cut, flap wheels wear away continually exposing fresh abrasives.

There are two types of non woven flap wheels: non-woven only abra-sive flaps where finishing is the primary application, and interleaf with alternating cloth and non-woven abrasive flaps (less conform-able, more aggressive) for stock removal and finishing. Interleaf flap wheels must always be run in the direction indicated by the arrow.

Applications: ● Blending ● Cleaning ● Deburring

● Finishing ● Polishing

Size Offering & Ranges Grit Range

• Flap Wheels with mounted steel shanks: 2” to 3” diameter• Flap Wheels with arbor holes: 3” to 12” diameter

Abrasive Grains

• Aluminum Oxide• Silicon Carbide

50 to 320


alro.comalro.com12

CHICAGO4501 James PlaceMelrose Park, IL 60160Ph: (800) 877-2576

CLEARWATER12490 49th Street N.Clearwater, FL 33762Ph: (727) 572-4344

GRAND RAPIDS4324 Airlane Drive SEGrand Rapids, MI 49512Ph: (616) 656-2800

JACKSON3100 E. High StreetJackson, MI 49203Ph: (517) 787-5500

E7-20

Stock Abrasive OfferingsUnified WheelsMade from non-woven synthetic fiber mesh, which is impregnat-ed with abrasives and bound with resins, non-woven wheels are designed to create desired surface finish where little or no stock removal is required. The industry’s broadest offering is available for light stock removal, deburring, blending, finishing and polish-ing. Non woven wheels have an open mesh construction that is waterproof, washable, conformable and non-loading.

Applications: ● Clean and remove imperfections on metal surfaces ● Clean built-up residue ● Deburr or finish a variety of surfaces ● Blend weld seams or create decorative finishes

Convolute WheelsFormed by wrapping and bonding web material impregnated with abrasive grain and resin around a center core. Convolute wheels offer a wide range of uses from burr removal to cleaning rust and oxides.

Applications: ● Burr and flashing removal ● Surface roughness reduction ● Blending weld areas on stainless steel ● Blending scratch patterns ● Removing rust and oxides ● Applying decorative finishes including

antique patterns

Features

• Smear and heat-resistant formula• Dense web construction (9 density)• Waterproof and non-metallic • Optimum grain/resin formulation• Conformable and flexible

Benefits

• Consistent, high quality results• Starting point for deburring, blending, polishing & finishing applications• Can be used dry, wet or with oil• No contamination of workpiece• Less operator fatigue• Durable, long life construction with versatile application range and improved cut rate and shed resistance

Alro Industrial Supply

Grit Range Abrasive Grains

Aluminum Oxide • Silicon CarbideExtra Coarse (EC) • Coarse (C) • Medium (Maroon) • Very Fine (Blue)


Alro Industrial Supply · 2020-05-12 · Glass seaming Polishing Portable Belts Portable belts are...

Documents

Transcript of Alro Industrial Supply · 2020-05-12 · Glass seaming Polishing Portable Belts Portable belts are...