Alphalite - Bricks Blocks Pavers and Landscape Supplies · Product Product Size (mm) Units Approx...
Transcript of Alphalite - Bricks Blocks Pavers and Landscape Supplies · Product Product Size (mm) Units Approx...
masonry.style and function
May 2014 Edition
Grey Concrete Blocks
Alphalite™
South East Queensland
Part
ners
in D
esig
n Se
ptem
ber
2007
Concrete MasonryNorth Queensland
NTH QLD Grey Blocks A5 Brochure:Layout 1 31/03/11 10:42 AM Page 2
style and functionAustral Masonry® manufactures a range of masonry bricks and blocks complying with the requirements of the Australian Standard AS/NZS4455.1:2008 tested under AS4456:2013.
The Alphalite™ range has been designed as all-purpose units to meet all your masonry site requirements. These masonry units are not only lightweight and loadbearing but also achieve high fire rating and sound as well as having many other attributes.
Alphalite™ gives you:
• Fireratedandsoundratedmasonry
• Highslendernessratio
• Structurallightweightmasonry(15MPa)
• Easeofrendering
• Easiertocutthanstandardblocks
2 | Austral Masonry®
Part
ners
in D
esig
n Se
ptem
ber
2007
Concrete MasonryNorth Queensland
NTH QLD Grey Blocks A5 Brochure:Layout 1 31/03/11 10:42 AM Page 2
environmental responsibility
Alphalite™ Block Product Guide | South East Queensland | 3
MaterialsMany aggregates used in the Alphalite™ mix are by-product materials which means they require less quarrying of natural sands or stones.
EmissionsAlphalite™ is kiln-cured, but unlike clay masonry units, the heat is low, with some steam added for even curing.
Alphalite™ masonry units are considerably lighter than standard concrete masonry. This reduces emissions associated with product transport.
DurabilityMany masonry buildings have passed their 100 year anniversaries. Structures that last longest, require less maintenance, and can be adapted for reuse having a lesser impact on the environment.
SummaryThe Alphalite™ mix was designed with the intention of using as much by-product material as possible. No beaches or river beds are disturbed and cement usage is minimised.
Alphalite™ is low-pressure cured with minimal steam required. This low embodied energy combines with higher durability to make a favourable lifecycle analysis; at the close of which, Alphalite™ masonry can be crushed and re-used.
Block Range 100mm Series
10-01 FullHollow 390x190x90 195 9.2kg >10 120
10-02 ThreeQuarter 290x190x90 192 8.1kg >10 120 and Corner Block
10-03 Half 190x190x90 360 4.9kg >10 120
10-04 Quarter 90x190x90 720 2.8kg >10 120
10-25 CornerReturn 390x190x90 144 11.7kg >10 120
10-31 90mmSolid 390x190x90 108 12.2kg >10 120
10-739 45°Squint 390x190x90 130 11.1kg >10 120
BlockRange100mmHalfHeightSeries
10-71 HalfHeightHollow 390x90x90 360 5.5kg >10 120
10.73 HalfHeightHalf 190x90x90 630 2.9kg >10 120
10.83 HalfHeightSolid 390x90x90 288 7.1kg >10 120
Product
Allblocks15MPaand2-hourfirerating(insulation),unlessotherwisenoted.AllavailableinStandardGrey.
4 | Austral Masonry®
Product Product Size(mm) Units Approx f’uc Insulation Code Description LxHxT PerPallet Weight (MPa) FRL(minutes)
Austral Masonry® AlphaliteTM Range
Universal
Block Range 120mm Series
12-01 FullHollow 390x190x110 120 11.9kg >10 90
12-25 CornerReturn 390x190x110x190 120 15.0kg >10 120
12-801 11/2HourFire 390x190x110 120 14.1kg >10 180
12-802 ThreeQuarter 290x190x110 160 11.0kg >10 180
12-803 Half 190x190x110 240 7.2kg >10 180
12-739 45°Squint 290x190x110x90 120 14.1kg >10 120
Block Range 150mm Series
15-01 FullHollow 390x190x140 144 11.2kg 15 120
15-02 ThreeQuarter 290x290x190 192 9.7kg 15 120
15-03 Half 290x190x110 288 6.3kg 15 120
15-04 QuarterSolid 190x190x140 410 2.7kg 15 120
15-09 ControlJoint 390x190x140 120* 11.2kg 15 120
15-10 ControlJointHalf 190x190x140 240* 7.0kg 15 120
15-12 Lintel 390x190x140 120 15.1kg 15 120
Product
Alphalite™ Block Product Guide | South East Queensland | 5
Product Product Size(mm) Units Approx f’uc Insulation Code Description LxHxT PerPallet Weight (MPa)FRL(minutes)
Rating
Legend. *Yatalaproductsoldinpairsof96unitsperpallet**Yatalaproductsoldinpairsof72unitsperpallet
Block Range 150mm Series
15-20 KnockoutBond 390x190x140 144 10.8kg 15 120
15-22 7/8Closure 340x190x140 162 10.6kg 15 120
15-25 CornerReturn 390x190x100x190 126 13.5kg 15 120
15-42 Channel 390x190x140 144 11.0kg 15 120
15-45 CBlockCleanOut 390x190x140 144 10.4kg 15 120
15-48 ‘H’Block 390x190x140 144 11.9kg 15 120 (Filled)
15-140 140HighBlock 390x140x140 192 7.7kg 15 90
15-801 4HourFireRating 390x190x140 120 16.3kg 15 240
15-803 4HourFireRated 190x190x140 240 8.5kg 15 240
15-739 45°Squint 290x190x140 126 10.2kg 15 120
15-745 LouvreBlock 390x190x140 96 15.8kg 15 N/A
Product
6 | Austral Masonry®
Product Product Size(mm) Units Approx f’uc Insulation Code Description LxHxT PerPallet Weight (MPa) FRL(minutes)
Austral Masonry® AlphaliteTM Range
Beam
Half
BlockRange150mmHalfHeightSeries
15-71 HalfHeightHollow 390x90x140 240 5.8kg 15 120
15-73 HalfHeightHalf 190x90x140 400 3.0kg 15 120
75-710 140Capper 390x40x140 392 4.6kg 15 120
Block Range 200mm Series
20-01 FullHollowor 390x190x190 108 14.1kg 15 180
20-02 ThreeQuarter 290x190x190 144 10.0kg 15 180
20-03 Half 190x190x190 180 8.0kg 15 180
20-03(42) HalfChannel 190x190x190 180 7.5kg 15 240
20-04(10.03) Quarter 90x190x90 300 5.9kg 15 180
20-09 ControlJoint 390x190x190 108** 15.0kg 15 240 (Filled)
20-10 ControlJointHalf 190x190x190 108** 9.6kg 15 240 (Filled)
20-12 Lintel 390x190x190 90 20.7kg 15 240 (Filled)
20-13 HalfLintel 190x190x190 216 7.9kg 15 240
20-18 DeepLintel 190x390x190 130 13.0kg 15 180
20-20 KnockoutBond 390x190x190 108 12.6kg 15 240
20-21 CornerKnockout 390x190x190 108 13.9kg 15 240
20-22 7/8Closer 340x190x190 126 11.6kg 15 180
20-25 3/4HighLintel 290x190x190 144 11.0kg 15 180
Product Product Product Size(mm) Units Approx f’uc Insulation Code Description LxHxT PerPallet Weight (MPa) FRL(minutes)
Beam
Bond Beam
Alphalite™ Block Product Guide | South East Queensland | 7
Corner Block
(Filled)
(Filled)
(Filled)
Legend. *Yatalaproductsoldinpairsof96unitsperpallet**Yatalaproductsoldinpairsof72unitsperpallet
(Filled)
Block Range 200mm Series
20-140 140HighBlock 390x140x190 144 10.6kg 15 120
20-38 HalfHeightFlushSill 190x115x95x30 180 6.4kg 15 N/A
20-42 Channel 390x190x190 108 13.2kg 15 240
20-45 CBlockCleanOut 390x190x190 108 12.4kg 15 240
50-45 CleanOutTileand 300x190x40 192 4.5kg 15 240 (Filled)
20-48 HBlock 390x190x190 108 12.0kg 15 240 (Filled)
20-60 BondedPilasterHalf 390x190x390x190 72 19.5kg 15 240 (Filled)
20-925 SingleCore 390x190x190 108 15.8kg 15 240 (Filled)
20-739 45° Squint 290x190x190x90 108 11.0kg 15 120
BlockRange200mmHalfHeightSeries
20-71 HalfHeightHollow 390x90x190 180 6.5kg 15 120
20-72 HalfHeight 290x90x190 264 4.6kg 15 120
20-73 HalfHeightHalf 190x90x190 288 4.3kg 15 120
20-74 HalfHeightQuarter 190x90x90 630 3.5kg 15 120
50-31 190Capper 390x40x190 288 5.7kg 15 120
Product
8 | Austral Masonry®
Product Product Size(mm) Units Approx f’uc Insulation Code Description LxHxT PerPallet Weight (MPa) FRL(minutes)
Austral Masonry® AlphaliteTM Range
Spring
(Filled)
(Filled)
x 200
Three Quarter
Block Range 300mm Series
30-925 FullHollow 390x190x290 72 18.1kg 15 120
30-02 ThreeQuarter 290x190x290 96 15.6kg 15 120
30-03(20.02) Half 190x190x290 144 10.0kg 15 120
30-04(10.02) Quarter 90x190x290 192 8.1kg 15 120
30-18 DeepLintel 190x390x290 72 20.4kg 15 240 (Filled)
30-20 KnockOutBond 390x190x290 72 20.7kg 15 240 (Filled)
30-42 Channel 390x190x290 72 20.0kg 15 240 (Filled)
30-45 CBlockCleanOut 390x190x290 72 16.4kg 15 240 (Filled)
30-48 HBlock 390x190x290 72 15.3kg 15 240
Bricks
48-65 Common 290x76x110 420 3.0kg 15 180
80-01 DoubleHeightBrick 230x162x110 300 5.7kg 15 120
400 Series
40-925 FullHollow 390x190x390 54 22.3kg 15 120
Pavers
50-31 190WallCap 390x40x190 288 5.7kg 15 N/A
75-710 140WallCap 390x40x140 392 4.6kg 15 N/A
Product Product Product Size(mm) Units Approx f’uc Insulation Code Description LxHxT PerPallet Weight (MPa) FRL(minutes)
Beam
Legend. *Yatalaproductsoldinpairsof96unitsperpallet**Yatalaproductsoldinpairsof72unitsperpallet
10 | Austral Masonry®
Notes
Alphalite™ Block Product Guide | South East Queensland | 11
Notes Notes
The product images in our brochures give a general indication of colour for your preliminary selection. Wealsorecommendyouviewcurrentproductsamplesbeforemakingyourfinaldecision.
The range of building products from
Austral Masonry National OfficesQueensland 184 Burnside Road Ormeau QLD 4208
POBox502 BeenleighQLD4207
Tel +61734417500 Fax+61738077033
New South Wales 44 Clunies Ross Street ProspectNSW2148
Tel +61298402333 Fax+61298402344
Victoria 59ElliottRoad DandenongVIC3175
POBox4068 DandenongSouthVIC3164
Tel +61397916988 Fax+61397911644
1300 MASONRY (1300 627 667)
1. Stock colours. Colours other than stock colours are made to order. Contact your nearest Austral Masonry office for your area’s stock colours. A surcharge applies to orders less than the set minimum quantity.
2. Colour and texture variation. The supply of raw materials can vary over time. In addition, variation can occur between product types and production batches.
3. We reserve the right to change the details in this publication without notice.4. For a full set of Terms & Conditions of Sale please contact your nearest Austral Masonry sales office.
This brochure is subject to change without notice.
A member of Proudsupporters