Allis Chalmers - Steiner Tractor · · 2014-12-05Allis Chalmers farm tractors were in production...

2 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm

Allis Chalmers farm tractors were in production from 1914 through 1985. In 1985, Deutz acquired the Allis Chalmers brand and then sold it to AGCO in 1990. In an effort to preserve America’s agricultural heritage, Steiner Tractor Parts offers many restoration quality components for collectors and enthusiasts of these machines.

Allis Chalmerswww.SteinerTractor.com >

Steiner Community > Tractor Stories

View more pictures & tractor stories in our digital book!

Photos submitted by folks just like you!

A. "1949 Allis Chalmers G" Andy Machicek, Temple, TX

B. "The tractor Grandpa gave me when I was 16" Erik Glover, Doniphan, NE

C. "Restored 1955 Allis Chalmers WD45" Chad Grady, Seven Springs, NC

D. "AC 185 after chopping wheat stubble" Brianna Gwirtz, Shelby, OH

E. "My Great-Grandfather's AC Unstyled WC: Fully restored" Jason Ridinger, Middletown, MD

Our complete album can be viewed at http://www.steinertractor.com/tractor-photo-winners.html

B

A

D

C

E

1

http://www.steinertractor.com

http://www.steinertractor.com/tractor-photo-winners.html

3STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com

Allis

Chalmers

AAir cleaner parts caps ..................................................38 clamps .............................................38 filter element ................................38 hoses................................................38 oil cups ............................................38 pipe bracket ..................................38 pipe grommet ..............................38Alternators, parts alternators .....................................32 bracket ............................................33 mounting kits ........................32, 33 pulleys .............................................32Amp gauges .......................................22

BBattery boxes, parts battery boxes .........................25, 26 bracket set .....................................25 j-bolt ................................................26 lid ......................................................26 side cover .......................................26Battery cables ....................................25Brake parts adjusting screw ............................52 band .................................................52 drums ..............................................52 pin ..............................................52, 53 riveting tool...................................52 shaft .................................................52 shoe lining sets ............................52 shoes................................................52 springs ..................................... 52-53

CCamshaft parts bearing & bushing set ...............10 gears ................................................10Caps air cleaner ......................................38 distributor ......................................27 engine .............................................13 fuel ...................................................40 magneto .........................................29 oil fill / breather ...........................13 power steering reservoir ..........48 pre cleaner .....................................39 radiator ...........................................20 rain ...................................................15 steering wheel ...................... 46-47Carburetors, parts adjustment needle assy ............16 bushing ...........................................16 carburetors ....................................16 discs .......................................... 16-17 elbow strainer assy .....................16 floats ................................................17 gaskets ............................................17 needle float valves ......................16 nozzles ............................................16 repair kits ................................ 18-19Cast rocker arm support stands .... 9

CChoke parts cables ..............................................16 knob .................................................16 rod ....................................................16Cigarette lighters ..............................26Clutch, trans. parts alignment tool .............................43 bearing............................................43 bushings .........................................44 clutch kits .......................................43 dipstick ...........................................44 disc ...................................................43 flywheel cover ..............................43 fork ...................................................44 inspection cover plates .............43 kits ....................................................42 main shaft drive gear .................44 pinion shaft gears .......................44 pressure plates .............................43 return springs ........................43, 44 seal ...................................................44 shaft .................................................44 throw out bearings ..............43, 44Crank hole casting ...........................36Crankshaft, parts bearings ...................................11, 12 crankshaft ......................................10 pulleys .............................................10 seals ..........................................10, 11

DDash light, parts bulb ..................................................34 cover ................................................34 dash light .......................................34Data book ............................................60Decals ............................................ 59-60Distributor parts bushing and shim kit .................27 caps ..................................................27 clips ..................................................27 coils ..................................................27 dust cover ......................................27 gasket ..............................................27 grommet ........................................28 loom holder ..................................28 resistor ............................................27 rotor button ..................................28 spark plug wire sets ...................28 spark plugs ....................................28 tags ...................................................27 terminal insulator assys ............26 tune-up kits ...................................28Drawbars, parts bars...................................................58 bushing ...........................................58 drawbars ........................................58 guide assy ......................................58 lock ...................................................58 repair kit .................................. 58-59 spring ..............................................58 yoke assy ........................................58DVDs......................................................61

EElectric outlet socket, parts boot .................................................25 connector plug ............................25 socket ..............................................25Electric panels panels ..............................................25 trim ...................................................25Emblems / nameplates clip ....................................................36 emblems ........................................36 rivet ..................................................36Engine gasket sets .........................8, 9Engine oil cap ....................................13Engine overhaul kits .......................... 8Exhaust pipes .....................................15Exhaust stacks....................................15

FFan belts ...............................................21Fan blade .............................................21Fenders .......................................... 50-51Flywheel ring gears .........................14Fuel filters element ..........................................41 fuel filters .......................................41 screen ..............................................41Fuel gauges ........................................23Fuel lines ..............................................42Fuel tank, parts caps ..................................................40 gaskets ............................................40 tank ..................................................40 webbings .......................................40Fuse holder .........................................26

GGauges amp ..................................................22 fuel ...................................................23 oil pressure ....................................22 tachometers ........................... 23-24 traction booster gauge .............22 water temperature .....................23Gear shift boots .................................46Gear shift knobs ................................45Gear shift lever, parts lever .................................................44 pins ...................................................44 washer and snap ring ................44Generator parts band cover .....................................31 belt ...................................................31 brackets ..........................................31 cut-out assy ...................................31 tags ...................................................32Governors, parts governor .........................................19 springs ............................................19Grille parts mounting tabs .............................36 screens ............................................37

HHand clutch lever .............................51Hand cranks brackets ..........................................36 levers ...............................................36Headlights, parts bezel ................................................35 bracket ............................................33 bulbs ................................................35 gaskets ............................................35 headlights ...............................33, 34 knobs ...............................................35 lens ...................................................35 reflectors ........................................35 ring ............................................34, 35 rings .................................................35 terminal ..........................................35 visor..................................................34 washer .............................................35Hoods ...................................................37Hydraulic oil filter .............................53

IIgnition parts bushing and shim kit .................27 caps ..................................................27 clips ..................................................27 coils ..................................................27 dust cover ......................................27 gasket ..............................................27 grommet ........................................28 loom holder ..................................28 resistor ............................................27 rotor button ..................................28 spark plug wire sets ...................28 spark plugs ....................................28 tags ...................................................27 terminal insulator assys ............26 tune-up kits ...................................28

KKnobs ....................................................45

LLight switches, parts knobs ...............................................33 plate .................................................33 resistor ............................................33 switches ..........................................33

MMagnetos, parts caps ..................................................29 coils ..................................................29 condensors ....................................29 gaskets ............................................29 magneto .........................................29 manual ............................................29 points ..............................................29 rotors ...............................................29

Index continues on next page

Allis Chalmers: Alphabetical index



Alli

sCh

alm

ers

MManifolds, parts bracket .............................................. 6 elbows ............................................... 7 gasket material .............................. 7 gaskets ..........................................6, 7 manifolds ......................................... 6 nuts .................................................... 6 pipe ................................................6, 7 studs .................................................. 6 washer kit ......................................... 6Manuals .........................................60, 61Mufflers bracket ............................................14 clamps .............................................14 mufflers ....................................14, 15

OOil / breather caps ............................13Oil filters, part base gasket ...................................13 oil filters ..........................................13Oil pan drain plug drain plug ......................................13 gaskets ............................................13 washer .............................................13Oil pressure gauges, parts .............22 copper line kit ..............................23 fittings .............................................23 oil pressure gauge ......................22Oil pump repair kit ...........................14

PPiston ring sets ................................ 7-8Power steering parts belt ...................................................48 bolt ...................................................48 cap ....................................................48 couplers ..........................................48 port blocks.....................................48 priority flow control valve ........48 pulley ...............................................48 torque generator .........................48Pre-cleaner parts base ..................................................39 bowls ...............................................39 caps assys .......................................39 clip/springs kit .............................39 covers ..............................................39 pre-screener ..................................39 screen ..............................................39PTO parts knob .................................................54 over-running clutches ...............54 seals .................................................54 shield ...............................................54Pushrods ................................................ 9

RRadiator, parts caps ..................................................20 clamps .............................................20 drain plug ......................................19 gaskets ............................................20

RRadiator, parts cont... hoses................................................20 mounting pad ..............................19 pipes ................................................20 radiators .........................................19Raincaps ...............................................15Rear axle, parts bearing............................................53 gasket .......................................53, 54 rear axle ..........................................53 seals ..........................................53, 54Rims, rear and front bearing kits....................................55 bolts ...................................54, 56, 57 inner tube valves .........................56 nuts ...........................................54, 56 rear rim clamps ............................56 rims ..................................................57 seals .................................................55 stops ................................................57 washer .............................................56 wheels .............................................55

SSeats, parts assy ...................................................50 backs ................................................49 bolt ...................................................50 bumper ...........................................49 bushings ..................................49, 50 coil ....................................................50 cushions ..................................49, 50 hardware kit ..................................49 pads .......................................... 49-50 pan ...................................................49 pan repair kit.................................49 pivot support rod ........................50 shock absorbers...........................50 support / spring ...........................49Sediment bowl assys., parts bail assys ........................................41 gaskets ............................................41 glass bowls ....................................41 screens ............................................41 sediment bowl assys ...........40, 41Shroud assys .......................................51Side panels ..........................................37Sleeve & piston kit .............................. 8Sleeve sealing o-rings ....................... 8Starters, parts band cover .....................................30 drives ...............................................30 housings .........................................30 keys ..................................................31 levers ...............................................30 plate .................................................31 repair studs....................................29 rod ....................................................29 spring ..............................................30 starter solenoids ..........................29 switches ................................... 29-31 tags ...................................................30Steering bearings .............................47

SSteering joint repair kits .................47Steering parts brackets ..........................................48 bushings .........................................48 shaft .................................................47 shaft tubes .....................................47Steering wheels, parts bushing ...........................................46 center caps / emblems .......46, 47 nuts ...........................................46, 47 spinner ............................................47 steering wheels..................... 46-47Steps......................................................54

TTachometers cables .......................................23, 24 drive adaptor ................................24 drive assy........................................24 drive gear .......................................24 drive gear & shaft ........................24 gasket kit ........................................24 nipple ..............................................24 tachometer .............................23, 24Tail lights, parts bulbs ................................................35 gaskets ............................................35 knobs ...............................................35 lens ...................................................35 reflectors ........................................35 ring ...................................................35 rings .................................................35 switches ..........................................35 tail lights ..................................34, 35 terminal ..........................................35Thermostats, parts covers ..............................................21 gasket ..............................................21 thermostats ...................................21Three point hitch, parts brackets ..........................................59 bushing ...........................................58 conversions ...................................59 drawbars ........................................58 guide assy ......................................58 lock ...................................................58 pins ...................................................58 snap coupler repair kit .......58, 59 snap coupler spring ...................58 stabilizer bar .................................60Throttle parts bracket ............................................42 bushing ...........................................42 knob .................................................42 lever slide / block ........................42 levers ...............................................42 quadrant.........................................42 rod ....................................................42 springs ............................................42Tie rod, parts tie rod ..............................................49 tie rod boots .................................49 tie rod ends ...................................48

TTires, tubes nut ....................................................56 tires...................................................56 tubes ................................................56 valves ...............................................56Toolboxes ............................................51Top-links, parts bushing ...........................................58 pins ...................................................58 top links ..........................................58Traction booster gauge ..................22

UUmbrellas ............................................59

VValve cover gaskets ............................ 9Valve grind gasket sets ..................... 9Valve train kits....................................10Video .....................................................61Voltage regulators conversion kit ...............................32 regulators .......................................32

WWater pumps ...............................20, 21Water temperature gauges ...........23Weight, front anchors ...........................................58 bracket set .....................................58 rods ..................................................58 weight .............................................58Weights, wheel j-hook ..............................................57 weight .............................................57Wheels, front and rear bearing kits....................................55 bolts ..........................................54, 56 inner tube valves .........................56 nuts ...........................................54, 56 rear rim clamps ............................56 rims ..................................................57 seals .................................................55 stops ................................................57 washer .............................................56 wheels .............................................55

YYard spinner........................................59

Allis Chalmers: Alphabetical index cont...


Allis

Chalmers

170, 175, 180, 185, 190, 190XT, 210, 220

serial no. located at front of torque housing flange.

Model 1701968 .........................27211969 .........................53741970 .........................63691971 .........................69881972 .........................77971973 .........................8821

Model 1751970 .........................10011971 .........................14771972 .........................16241973 .........................17401974 .........................21531975 .........................3255

Model 1801968 .........................26821969 .........................60941970 .........................92351971 ...................... 105611972 ...................... 117291973 ...................... 12447

Model 1851970 .........................10011971 .........................19521972 .........................29351973 .........................37631974 .........................49611975 .........................6542

Model 190, 190XT1964 .........................10011965 .........................24851966 .........................82191967 ...................... 132731968 ...................... 192621969 ...................... 232341970 ...................... 259011971 ...................... 291361972 ...................... 310571973 ...................... 31118

Model 2001972 .........................10011973 .........................33441974 .........................6294

1975 .........................9250

Model 2101970 .........................10011971 .........................11071972 .........................20821973 .........................2469

Model 2201969 .........................10041970 .........................19381971 .........................24511972 .........................26261973 .........................2860

7000 serial no. located on RH side of differential housing.

Model 70001975 .........................1001

7030, 7040, 7050, 7060, 7080 serial no.

located above PTO guard.

Model 70301973 .........................10011974 .........................2595

Model 70401975 .........................1303

Model 70501973 .........................10011974 .........................1688

Model 70601975 .........................1299

Model 70801975 .........................1007

B, C, CA, G, U serial no. located on top of transmission case, to the rear of

shift lever.

Model B1937 ................................ 11938 ..............................97 1939 ...................... 11800

1940 ...................... 335021941 ...................... 497211942 ...................... 568721943 ...................... 645011944 ...................... 655021945 ...................... 702101946 ...................... 722651947 ...................... 733701948 ...................... 800561949 ...................... 922951950 ....................1023931951 ....................1145271952 ....................1186741953 ....................1223101954 ....................1242011955 ....................1247111956 ....................1264971957 ....................127186

Model IB1946 .........................10011947 .........................10031948 .........................10101949 .........................1282 1950 .........................15561951 .........................18791952 .........................22191953 ..............2570-28471954 .........................3068

Model C1940 ................................ 11941 ........................... 1121942 ...................... 123891943 ...................... 187821944 ...................... 239081945 ...................... 306951946 ...................... 363781947 ...................... 391681948 ...................... 515151949 ...................... 68281

Model CA1950 ..............................141951 ........................... 3221952 ...................... 105391953 ...................... 221811954 ...................... 314241955 ...................... 329071956 ...................... 37203 1957 ...................... 386181958 ...................... 38977

Model G1948 ................................ 61949 ...................... 109611950 ...................... 231801951 ...................... 240061952 ...................... 252691953 ...................... 264971954 ...................... 28036 1955 ...................... 29036

Model RC1939 ................................ 41940 .........................43921941 .........................5417

WC serial no. located on rear of differential

housing just above operator platform.

Model WC1933 ................................ 1 1934 ..............................29 1935 .........................3127 1936 ...................... 13870 1937 ...................... 31784 1938 ...................... 60790 1939 ...................... 752161940 ...................... 915341941 ....................1035171942 ....................1145341943 ....................1231711944 ....................1276421945 ....................1346241946 ....................1480911947 ....................1528451948 ....................170174

WD, WD45 serial no. is located on top of

left differential brake housing.

Model WD1948 ................................ 71949 .........................92501950 ...................... 354451951 ...................... 723281952 ....................1051821953 ....................131243

Model WD451953 ....................1466071954 ....................160386

B, C, CA, G serial number location

WD, WD45 serial number location

1955 ....................1909931956 ....................2179921957 ....................230295

WF serial no. located on rear of differential

housing above op. platform.

Model WF1937 ................................ 41938 ........................... 3891939 .........................13361940 .........................18921941 .........................23001942 .........................27041944 .........................30041945 .........................31951946 .........................35101947 .........................37481948 .........................41111949 .........................55001950 .........................73181951 .........................8316

D-10, D-12, D-14,D-15, D-17, D-19,

D-21 serial no. located at front of torque housing on

left side.

Model D-101959 .........................10011960 .........................19501961 .........................28011962 .........................45221963 .........................68011964 .........................76751965 .........................92041966 .........................94861967 .........................97951968 .........................9979

Model D-121959 .........................10011960 .........................19501961 .........................28011962 .........................36381963 .........................55011964 .........................60121965 .........................91921966 .........................95081967 .........................98301968 .........................9979

Model D-141957 .........................1001 1958 .........................9400 1959 ...................... 14900 1960 ...................... 21800

Model D-151960 .........................1001

1961 .........................19001962 .........................64701963 ...................... 130011964 ...................... 169281965 ...................... 196811966 ...................... 213751967 ...................... 237341968 ...................... 25127

Model D-171957 .........................10011958 .........................43001959 ...................... 165001960 ...................... 282001961 ...................... 331001962 ...................... 380701963 ...................... 650011964 ...................... 706111965 ...................... 770901966 ...................... 805331967 ...................... 86061

D-19 serial no. located on rear end

housing behind seat.

Model D-191961 .........................10011962 .........................73311963 ...................... 120011964 ...................... 16266

Model D-211963 .........................10011964 .........................14171965 .........................20791966 .........................24081967 .........................28631968 .........................37771969 .........................4498

D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 190, 200, 210, 220

serial number location

Allis Chalmers: Beginning serial numbers



Alli

sCh

alm

ers Manifolds, parts

Order # Price Description / Application

ACS001 $98.50 Manifold Fits: GReplaces: 70800333NOTE: Intake & exhaust ports are in perfect alignment! Made from ductile iron.

ACS001GK $7.95 Gasket Set (For ACS001)Replaces: 70800299 (manifold), 70800304 (carburetor)

ACS002B $99.00Manifold Fits: B, IB, C, CA, RCReplaces: AM2919, 70225323

ACS002GK $9.25Gasket Set (For ACS002B)Replaces: 70226096

ACS085 $224.50Manifold & Exhaust Elbow Fits: WC, WF up to engine SN: 106509 w/ 45º side exhaust out of left side of hood, Replaces: 70203178, 70229940

ABC2290 $0.95 Brass Manifold Nut fits: B, C, CA, D10 thru D15, RC, WC, WD, WD45, WF gas, LP, Replaces: 70239400(3/8" - 16" NC)NOTE: Sold individually.

ACS004 $157.90Manifold & Bracket Fits: D17 up to SN: 32000 gas w/out threaded exhaustReplaces: 70224782, 70229416

ACS004GK $16.30 Gasket Set (For ACS085, ACS004)Replaces: 70299958NOTE: Elbow gaskets were never used.

ACS217 $4.95 Manifold Stud (For ACS085, ACS004)Replaces: 70203072(4-1/2" coarse both ends, 3/8" dia.)USA made NOTE: 6 studs used per engine; Sold individually.

ACS1762 $4.95Bracket (For Muffler) Fits: Early D17 gas, Styled WC, WD, WD45; Will also fit the B, C, CA, RC if customer trims approximately 1" off the length & redrill one hole if needed

ACS156 $269.95 ManifoldFits: D10, D12, I40, I400Replaces: 70233235(17-3/8" c.c. outer stud holes, 2-1/4" c.c. carb mount, 1.000" dia. center venturi hole)

Manifolds, parts cont...Order # Price Description / Application

ACS003 $169.95 Manifold fits: D14, (D15 up to SN: 9001 gas); Will fit D15 gas SN: 9001 & up, but customer must make an adaptor for muffler; I-60, I-600Replaces: 70234143

ACS003GK $9.75 Gasket (For ACS156, ACS003)Replaces: 70234140USA made

ACS004 $157.90 Manifold w/out Threaded Exhaust & Bracket Fits: D17 up to SN: 32000 gas w/out threaded exhaustReplaces: 70224782, 70229416

ACS081 $189.60 Manifold w/ Threaded Exhaust Fits: D17 series III, IV SN: 32001 & up; 170, 175 gas (All w/ threaded exhaust)Replaces: 70257485NOTE: Will fit Early D17 when threaded pipe desired.

ACS1875 $9.95 Exhaust Pipe Fits: D17 SN: 32001 & up gas, LP, 170 gas, 175 gas, Replaces: 70234541(1-1/2" pipe thread x 4" length)USA made

ACS004GK $16.30

Gasket Set (For ACS081)

FDS1721 $7.95Manifold Nut & Washer Kit Fits: D17 gas, LP, (170, 175 gas)Replaces: 70237091(7/16"-20 NF)

ABC1878 $1.75 Manifold Nut & Lockwasher Fits: D15 diesel, D17, D19 gas, diesel, 170, 175 gas, Replaces: 70237091(7/16" - 20 NF) NOTE: Brass nut, yellow zinc lockwasher. 6 or more used per tractor, Sold individually.

ACS1872 $5.95 Manifold Stud fits the following gas, LP: D17, 170, 175, Combines w/ 226 gas engine: E, E3, Replaces: 70229339(7/16"-14 NC x 7/16"-20 NF x 4-3/4" length) NOTE: 6 used per engine; Sold individually.

ACS005 $260.00 ManifoldFits: D19 gas, Combines: A, C, F w/ 6-cyl. 230, 262" Allis Chalmers engine, Replaces: 74513468, 74516769

COS010GK $19.95 Manifold Gasket (For ACS005) Fits: D19 gas USA madeNOTE: When customer wants a 1-piece gasket instead of individual gaskets.

Engi

ne p

arts

http://www.steinertractor.com/ACS001

http://www.steinertractor.com/ACS001GK

http://www.steinertractor.com/ACS002B



http://www.steinertractor.com/ABC2290












http://www.steinertractor.com/FDS1721




http://www.steinertractor.com/COS010GK


Allis

Chalmers

Manifolds, parts cont...Order # Price Description / Application

ACS005GK $17.80

Gasket (For ACS005)Replaces: 74512715

IHS003EXP $12.50

Exhaust Pipe (For ACS005)Replaces: 74513471(2" pipe threads, 2-1/4" O.D., 10-3/8" or longer)

ACS307 $88.50

Exhaust Turbo Elbow Fits: D19, D21, 210, 220, 7000, 7010, 7020 Replaces: 70253661

ACS088 $79.95

Turbo Elbow Fits: 190, 200; Combines: GL, L, L2, M, M2, Replaces: 70244418

ABC2511 $3.95 Turbocharger to Exhaust Manifold Mounting Gasket fits: D19 thru 8550Replaces: 74025781 USA madeNOTE: See website for full applications.

Gasket materials - USA madeOrder # Price Description / Application

ABC448 $17.90 Exhaust Manifold Gasket Material Fits: Allis Chalmers models(1/16" thick x 12" wide x 28-1/2" long)NOTE: Perforated steel core.

ABC1830 $13.95 Cork / Rubber Rollpack Gasket MaterialFor making general purpose gaskets(1/16" thick x 12" wide x 24" long)NOTE: Do not use for high temperature applications.

ABC1835 $10.95 Cork / Rubber Rollpack Gasket MaterialFor making general purpose gaskets(3/32" thick x 12" wide x 24" long)NOTE: Do not use for high temperature applications.

Gasket materials - USA made cont...Order # Price Description / Application

ABC1844 $15.95Gasket Paper For making general purpose gaskets(0.0160" thick x 18" wide x 98" long)NOTE: Do not use for high temperature applications.

ABC1846 $22.95Gasket Paper For making general purpose gaskets(0.0275" thick x 20" wide x 108" long)NOTE: Do not use for high temperature applications.

Piston ring sets - USA made (unless noted)

Measure old rings before ordering. Do not order by tractor

model only. To ensure you order the correct rings, you will need

the following information:

Piston rings can not be returned if opened. Call or email for

price and availability of other sizes.

Order # Price Application

Fits: Some early B (w/ Waukesha Flathead engine) (If 3 ring piston, discard 1 compression ring) & early B (w/ AC engine) 4-cyl.

ABC2166 $69.95 ABC2166: 3-1/4" bore, (3) 0.125" compression rings, (1) 0.187" oil ring

Fits: Some B, C, CA, IB, RC, (D10, D12 up to SN: 3500)ABC2070 Replaces: 70230093, 79017908

ABC2070 $74.95 ABC2070: 3-3/8" standard bore, (3) 0.125" compression rings, (1) 0.187" oil ring

ABC2072 $121.75 ABC2072: 3-7/16" bore, (3) 0.093" compression rings, (2) 0.187" oil rings NOTE: On some engines, discard 1 oil ring per cylinder.


Fits: 'Some' D15 SN: 9001 & up, H3 SN: 6960 & up, I60, I600 4-cyl. gas, LP w/ G160 engine, Replaces: 70248293


Piston rings sets continue on next page

Quantity of each ring thickness per piston.

1 2 3Bore size Thickness of each ring

Engine parts



http://www.steinertractor.com/IHS003EXP














Alli

sCh

alm

ers Piston ring sets - USA made (unless noted) cont...

Measure old rings before ordering. Do not order by tractor

model only. To ensure you order the correct rings, you will need

the following information:

Piston rings can not be returned if opened. Call or email for

price and availability of other sizes.


Fits: Some D17, WC, WD, WD45, 170, 175 gas, LPABC2076 Replaces: 70230091

ABC2076 $109.70 ABC2076: 4" bore, (3) 0.125" compression rings, (1) 0.250" oil ring

ABC2078 $128.95 ABC2078: 4-1/8" bore, (2) 0.093" & (1) 0.125" compression rings, (1) 0.250" oil ring

ABC2190 $118.50 ABC2190: 4" bore, (3) 0.125" compression rings, (1) 0.187" oil ring

ABC2082 $79.50 ABC2082: 4" bore, (3) 0.093" compression rings, (1) 0.250" oil ring NOTE: Not USA made


Fits: G 4-cyl.ABC2065 Replaces: 70800325ABC2063 Replaces: 70800507

ACS2065 $82.50 ACS2065: 2.375" bore, (2) 0.093" compression rings, (1) 0.187" oil ring

ACS2063 $82.50 ACS2063: 0.020" overbore, 2.395" bore, (2) 0.093" compression rings, (1) 0.187" oil ring

Fits: WD45 diesel 6-cyl.


Engine overhaul kitsInframe or out of frame kits are available

by special order for G, B, C, CA, RC, WC,

WD, WD45, D10 thru 8070. For price and

availability call, or visit Special Order Parts

under Shop Online on our website.

Sleeve & piston kitsNOTE: Includes sleeves, pistons, piston

ring sets, piston pins, pin retainers,

sleeve sealing rings. Most other sets

available by special order.


ACS3050 $328.50 NEW! Fit: B, C, CA, IB, RC w/ 125" engine, Replaces: 70282941(3.4375" overbore, flat top aluminum pistons)

ACS3052 $418.50 NEW! Fits: WC, WD, WF 4-cyl. w/ 201" gas engines Replaces: 70283616 (4.125" overbore, aluminum flat top pistons)

ACS3056 $399.95 NEW! Fits: WD45, D17, 170, 175 gasReplaces: 70284361(4.125" overbore, aluminum concave head pistons)

Sleeve sealing o-rings- USA madeNOTE: Sold as one pair for one cylinder.


ACS2111 $4.95 Fits: B, C, CA, IB, RC (All w/ 116" & 125" engines), Replaces: 70206666, 70227501 (0.125" thick)

ACS2109 $4.95 Fits: D10, D12, D14, (D15 up to SN: 9000), I40, (H3 up to SN: 6959) gas, LP (All w/ G138 & G149 engines)Replaces: 70227563 (0.135" thick)

ACS2113 $6.95 Fits: WC SN: 65528 and up, WD, WD45, WF, D17, 170, 175 gas, LPReplaces: 70207436, 70227500(0.125" thick)

Engine gasket setsNOTE: Includes all gaskets & crankshaft seals for major engine

overhaul.


ABC1319 $82.90

Fits: G w/ N-62 Continental engineReplaces: 70800336

ACS1322 $69.00

Fits: B, IB, C, CA, RCReplaces: 70277278

Engi

ne p

arts

Quantity of each ring thickness per piston.

1 2 3Bore size Thickness of each ring


















Allis

Chalmers

Engine gasket sets cont...Order # Price Application

ACS1949 $106.50Fits: D10, D12, D14, (D15 up to SN: 9000), I40, I400, (H3 up to SN: 6959), RT40 (All w/ gas, LP w/ 138, 149" engines), Replaces: 70255326

ACS1320 $111.45Fits: WC & WF both w/ engine SN: 72459 & up (15 stud head); WD, WD45, D17, 170, 175 gas, LPReplaces: 70277290

Valve grind gasket setsNOTE: Includes all gaskets required when replacing the cylinder

head.


ACS025VGK $49.95Fits: G w/ N-62 Continental engineReplaces: 70800258, 70800295, 70800297, 70800299

ACS297 $54.95Fits: B, IB, C, CA, RC (All w/ 116 c.i. or 125 c.i. gas engines up to 3.625" bore)Replaces: 70224768

ACS291 $65.95 Fits: WC, WF w/ engine SN: 72459 & up w/ 15 stud head, WD, WD45, D17, 170, 175 gas, LP (All w/ 201, 226" gas engines), Replaces: 70277286USA made

ACS1658 $42.75 Fits: D10, D12, D14 (D15 up to SN: 9000), I40, I400, (H3 up to SN: 6959) RT40 gas, LP (All w/ 138, 149" engine)Replaces: 70277264USA made

ABC2827 $32.50NEW! Fits: 160, 6040 w/ Perkins 3-cyl. AD-3152 dieselReplaces: 72080298

Valve cover gaskets


ACS313 $14.95 Fits: B, IB, C, CA, RCReplaces: 70206892

ACS1187 $16.25 Fits: D10, D12, D14, D15, I-40, I-60, I-400, I-600 gas, LPReplaces: 70255296 USA made

Valve cover gaskets cont...Order # Price Application

ABC1661 $16.50 Fits: D15, HD3 dieselReplaces: 4513480, 74501034 USA made

ACS315 $14.95 Fits: WC, WD, WD45, WF, D17, 170, 175 gas, LP (All w/ 201, 226" engines)Replaces: 70255297

ABC2589 $27.50 Fits: D17 diesel, D19 gas, diesel, WD45 diesel, Replaces: 74513482, 74516343USA made

Pushrods, partNOTE: Pushrods are sold individually.


ACS2405 $22.50 Pushrod fits: B, C, CA, IB, RC; Power Units: B125, 60H; Loader: TL6; Combines: 60, 66, Replaces: 70207426(9.828" length, 0.280" dia.) USA made

ACS2410 $22.50 Pushrod fits: D10, D12, D14, D15, H3, I40, I60, I400, I600 (All w/ 138, 149, 160" gas, LP), Replaces: 70227633(9.233" o/a length, 0.270" O.D.) USA made

ACS2415 $22.50 Pushrod fits: D17, WC, WD, WD45, WF, 170, 175 gas, LP (All w/ 201, 226" engines)Replaces: 70203018 (11.017" o/a length, 0.314" O.D.) USA made

ACS2055 $7.15 Pushrod Side Cover Gasket Fits: WC, WD, WF, W Speed Patrol, 201" Power UnitsReplaces: 70218604

Cast rocker arm support standsNOTE: 4 used per tractor; Sold individually


ACS1196 $28.50

Fits: D10, D12, D14, D15, H3, I40, I60, I400, I600 gas, LP (All w/ G138, G149, G160" engines), Replaces: 70227627, 70239791

ACS1161 $28.50Fits: (WD, WF w/ engine SN: 253200 - 253489), WD45, D17, 170, 175 gas, LP (All w/ 201, 226" engines)Replaces: 70224727, 70225019(1.945" tall, 0.865" hole dia.)NOTE: Measure prior to ordering.

Engine parts




http://www.steinertractor.com/ACS025VGK













Alli

sCh

alm

ers Valve train kits


ACS2129 $115.00 Fits: B, IB, C, CA, D10, D12, D14, D15 (up to SN: 9000), H3, I40, I400, RC (All gas, LP)Replaces: (4) 70234829 intake valves, (8) 70206879 valve springs, (4) 70228589 exhaust valves, (8) 70234824 valve guide, (16) 70206880 valve keepersNOTE: Does not include retainers. Fits engine SN: CE161057 & up, to use on earlier engines customer must use exhaust valve roto caps #70224926 (not supplied from STP, Inc.).

ACS323 $156.65

Fits: G w/ N-62 Continental engineNOTE: Includes NEW valves, guides, springs, locks & retainers.

Camshaft partsOrder # Price Description / Application

ACS2515 $148.50 NEW! Camshaft Gear fits: WD45 SN: 48556 & up, D17, 170, 175 gas, LPReplaces: 70227038, 227038, AM4175-1(1.623" I.D. press on style)NOTE: 54 teeth. See website for additional applications.

ACS2757 $30.95 NEW! 3-piece Camshaft Bearing / Bushing Set fits: B, IB, C, CA, RC (All w/ 116, 125" engines)Replaces: 70209130 USA made

ACS2761 $32.95 NEW! 3-piece Camshaft Bearing / Bushing Set fits: D17 SN: 19978 & up, 170, 175 gas, LP; Serviceable for D17 up to SN: 19978, WC, WD, WD45 WF gas, LPReplaces: 70229953USA made

Crankshaft, partsOrder # Price Description / Application

ACS073 $399.00 Crankshaft fits: D10, D12, D14, D15 gas, H3, I-40, I-60, I-400, I-600Replaces: Casting #227550NOTE: For bearings see ACS1954, ACS1952.

ACS2631 $98.50

NEW! Crankshaft Gear fits: 170, 175, D17 gas; WD45 gas w/ engine SN: 45-11050 & up, Replaces: 70230217

Crankshaft, parts cont...Order # Price Description / Application

ACS349 $74.95

Crankshaft PulleyFits: G, Replaces: 70800220(5-3/16" O.D.)

ACS089 $38.50 Crankshaft Pulley fits: CA, (Early D10 up to SN: 3500), D12 up to SN: 3000, D14; Serviceable for B, C, IB but does not have provision for hand crankReplaces: 70236741, AM4529(5" pulley dia., 5/8" belt width)NOTE: Set screw NOT included.

ACS069 $185.50Double groove power steering w/ cone-shaped allen screwFits: WD, WD45 w/ & w/out power steering, Replaces: 70227395NOTE: Includes set screw.

ACS154 $78.95Crankshaft Pulley fits: Late D10 SN: 3501 & up, D12 SN: 3001 & up, D15, I60, I500, I600, Replaces: 70235043, AM4761(5-1/16" pulley dia., 3/8" belt width)NOTE: Includes set screw.

ABC1996 $9.95 Front Crankshaft Oil Seal Fits: D10, D12, D14, D15, H3, WC, WD, WD45, WF, I40, I60, I400, I600 gas, LPReplaces: 70226620, 70275814(2.000" O.D., 1.500" I.D., 0.250" wide)NOTE: WC, WD, WD45, WF w/ engines up to SN: 269166 can not reuse seal retainer 224929 as this seal is wider.

ABC2263 $17.95 Front Crankshaft Seal Fits: GReplaces: 70800223, 70272367(0.465" wide, 2.722" O.D.)USA made

IHS1307 $7.95 Front Crankshaft Seal Fits the following diesels: WD45, D15, D17, D19; Also fits D19 gasReplaces: 74513621(1.875" I.D., 2.627" O.D., .312" width)

ACS2829 $14.50 NEW! Rear Crankshaft Seal Fits: B, C, CA, IB, RC using 206847 retainerReplaces: 70225805 (3.375" I.D., 3.955" O.D., 0.270" width) USA madeNOTE: Original felt style.

ABC2000 $19.95 Rear Crankshaft Seal Fits: D10, D12, D14, D15, H3, I40, I400, I60 I600 gas, LPReplaces: 70227572(3.375" I.D., 3.955" O.D., .375" width)

Engi

ne p

arts














http://www.steinertractor.com/IHS1307




Allis

Chalmers

Engine parts

Crankshaft bearingsNOTE: Measure bearings before ordering, no returns if package has been opened.

Rod bearings are priced and sold per journal (2 halves) unless noted otherwise.

Main bearings sold as engine set. See website for additional applications.

Order # Price Description Applications Replacement number(s)

The following fit Some G w/ N62 Continental NOTE: Check rod cap style before ordering, see diagram. For bearings using angle split rods / caps, call for price & availability. Measure before ordering, no returns if package has been opened.ACS2872 $24.50 NEW! Standard Connecting Rod Bearing (For (1.500") standard rod journal & horizontal

split rod caps) USA made70800499

ACS2874 $24.50 NEW! Connecting Rod Bearing (For 0.010" undersize (1.490") rod journal & horizontal split rod caps)




ACS250 $98.50 Main Bearing Set (Set of 4 - 2 bearings) (2.000" standard size) USA madeNOTE: Thrust washers NOT included.

70800498

ACS2882 $98.50 NEW! Main Bearing Set w/ Thrust Washers (For 0.010" undersize (1.990") main journal)ACS2884 $98.50 NEW! Main Bearing Set w/ Thrust Washers (For 0.020" undersize (1.980") main journal)ACS2886 $98.50 NEW! Main Bearing Set w/ Thrust Washers (For 0.030" undersize (1.970") main journal)The following fit B SN: 101 & up, C, CA, IB, RCACS2481 $18.75 Standard Connecting Rod Bearing(For 1.937" standard rod journal) USA made

NOTE: 4 used per engine.70223629

ACS2483 $18.75 Connecting Rod Bearing (For 0.010" (1.927") undersize rod journal) USA made 70223639ACS2524 $18.75 Connecting Rod Bearing (For 0.020" (1.917") under size rod journal) USA made

The following fit B, C, CA, IB, RC, B125 Power Units NOTE: Priced & sold as set for engine.ACS2763 $104.50 NEW! Main Bearing Set (For 2.250" standard main journal) USA made 70206962, 70206961ACS2766 $104.50 NEW! Main Bearing Set (For 0.010" (2.240") undersize main journal size) USA madeACS2768 $104.50 NEW! Main Bearing Set (For 0.020" (2.230") undersize main journal size) USA made

The following fit D10, D12, D14, D15, H3, I40, I60, I400, I600 (All w/ 4-cyl. 138, 149, 160" gas, LP)ACS1952 $69.95 Standard Connecting Rod Bearings (Set of 4) (For 1.937" standard rod journal)

USA made70228486, 70237802

ACS2485 $17.15 Connecting Rod Bearing (For 0.010" (1.927") undersize rod journal) USA made

Crankshaft bearings continue on next page


ABC2056 $9.95Rear Crankshaft Seal Fits: G w/ N62 Continental engineReplaces: 70800225(3.375" I.D., 4.381" O.D., .500" width)

ACS2037 $8.952-Piece Rear Crankshaft Main Seal Fits: W, WC, WD, WF, WD45 gas, LPReplaces: 70224945, 70227120USA made


ACS2388 $9.952-Piece Rear Crankshaft Main Seal Fits: D17, 170, 175 gas, LPReplaces: 70229180, 70241294USA made

Will fit this style Rod/Cap

Will NOT fit this style Rod/Cap

Horizontal spilt cap Angle split cap




















Alli

sCh

alm

ers

Engi

ne p

arts

Crankshaft bearings cont...NOTE: Measure bearings before ordering, no returns if package has been opened.

Rod bearings are priced and sold per journal (2 halves) unless noted otherwise.

Main bearings sold as engine set. See website for additional applications.

Order # Price Description Applications Replacement number(s)

The following fit D10, D12, D14, D15, H3, I40, I60, I400, I600 (All w/ 4-cyl. 138, 149, 160" gas, LP) cont...ACS2488 $17.15 Connecting Rod Bearing (For 0.020" (1.917") undersize rod journal) USA madeACS1954 $186.50 Main Bearing Set (For 2.749" standard main journal) USA made 70237651, 70237652,

70237830, 70237831ACS2776 $149.50 NEW! Main Bearing Set (For 0.010" (2.739") undersize main journal size)ACS2778 $149.50 NEW! Main Bearing Set (For 0.020" (2.729") undersize main journal size) USA made

The following fit D17, (WC w/ engine SN: 13655 & up), WD, WD45, 170, 175 (All gas, LP)ACS2490 $13.25 Standard Connecting Rod Bearing (For 2.375" standard rod journal) USA made 70231125ACS2493 $13.25 Connecting Rod Bearing (For 0.010" (2.365" undersize rod journal) USA madeACS2562 $13.25 Connecting Rod Bearing (For 0.020" (2.365") undersize rod journal) USA made 70223625The following fit WC, WD, WD45, WF (All gas, LP w/ 201 & early 226 engines) (2.436" front & 2.477" center & rear main standard journal size)ACS2770 $117.75 NEW! Main Bearing Set (For standard main journal size) USA made 70228620ACS2772 $117.75 NEW! Main Bearing Set (For 0.010" undersize main journal) USA madeACS2774 $117.75 NEW! Main Bearing Set (For 0.020" undersize main journal) USA made

The following fit D17, 170, 175 gas, LP w/ crankshaft #229022 w/ center main thrust bearingACS2780 $89.95 NEW! Main Bearing Set (For (3.000") standard main journal size) USA made 241103, 234177,

70241103, 70234177ACS2782 $89.95 NEW! Main Bearing Set (For 0.010" (2.990") undersize main journal size) USA madeACS2784 $89.95 NEW! Main Bearing Set (For 0.020" (2.980") undersize main journal size) USA made

The following fit D15 diesel, D17 diesel, D19 gas, diesel, WD45 diesel (All w/ standard 1.998" rod journal)ABC2495 $15.95 Standard Connecting Rod Bearing (For Standard 1.998" rod journal) USA made 74517331ABC2498 $15.95 Connecting Rod Bearing (For 0.010" (1.988") undersize rod journal) USA made

NOTE: See website for additional applications.74514864

The following fit I60, 6040 w/ Perkins 3-cyl. 144", 152" gas, dieselNOTE: See website for additional applications.ABC2888 $14.95 NEW! Standard Connecting Rod Bearings 3-cyl. set (For 2.249" standard rod journal) 72080082ABC2890 $12.95 NEW! Connecting Rod Bearings 3-cyl. set (For 0.010" (2.239") undersize rod journal) 72080083ABC2892 $13.75 NEW! Connecting Rod Bearings 3-cyl. set (For 0.020" (2.229") undersize rod journal) 72080084ABC2894 $12.50 NEW! Connecting Rod Bearings 3-cyl. set (For 0.030" (2.219") undersize rod journal) 72080085ABC2898 $19.95 NEW! Main Bearing Set (For 2.749" standard main journal) 72080078ABC2900 $19.95 NEW! Main Bearing Set (For 0.010" (2.739") main journal size) 72080079ABC2902 $19.95 NEW! Main Bearing Set (For 0.020" (2.729") main journal size) 72080080ABC2904 $19.95 NEW! Main Bearing Set (For 0.030" (2.719") main journal size) 72080081ABC2811 $7.95 NEW! 4-piece Thrust Washer Set (Standard (0.122") thick) 72080086, 72080088ABC2813 $9.95 NEW! 4-piece Thrust Washer Set (Oversize (0.129") thick) 72080087, 72080089






















Allis

Chalmers

Oil capsOrder # Price Description / Application

IHS338 $9.95 Engine Oil Fill Cap w/ Gasket Fits: GReplaces: 70800287(1-3/4" I.D. tang to tang 1-3/8)USA made

ACS178(Without Clip)

$38.50

Oil Fill / Breather Cap & Copper Filter Element Fits: B, IB, C, CA, RC, WC (On rocker arm cover); Late WD, WD45, WF, D10, D12, D14, D15, D17, 170, 175, 190XT, I-40, I-400, I-60, I-600Replaces: 70205298(3-1/4" tall) USA made NOTE: Exact of original. E-coated black. "Oil" stamped into top.

IHS406(With Clip)

$38.50

ACS286 $14.95 Oil Fill Cap w/ Gasket Fits: WD45, 170, 175 gasReplaces: 70226376(2-3/16" I.D.)

JDS500 $32.50 Oil Fill / Breather Cap w/ Clip & Copper Filter Element Fits: WC, Early WD, WF, (On governor housing) D15 diesel up to engine SN: D-03046 & D19 diesel up to engine SN: D-03046, Replaces: 70207552(1-1/2" tall) USA made NOTE: Exact of original. E-coated black. "Oil" stamped into top. Fits over 1-1/2" pipe.

ABC042 $12.95 Oil Fill / Breather Cap w/ Clip & Filter Element fits: Same as JDS500Replaces: 70207552(1-1/2" tall)NOTE: Economy style.

Oil pan drain plug, gasketsOrder # Price Description / Application

ABC539 $7.95 Oil Pan Drain Plug fits: (B SN: 64501 & up), IB, C, CA, WC, WD, WD45, D10 thru D21, (170 gas only), (175 gas only), 180 thru 220, 6060, 6070, 6080, 7000, 7010, 7020, 8010 gas, diesel, LPReplaces: 74026437(7/8" x 18 NF) USA made

ABC540 $2.95Washer / Gasket (For ABC539)Replaces: 70226012 USA madeNOTE: Copper.

Engine partsOil pan drain plug, gaskets cont...


ACS357 $10.75Oil Pan Gasket Fits: G & others w/ N-62 Continental engine, Replaces: 70800286USA made

ACS293 $13.95 Oil Pan GasketFits: B, IB, C, CA, D10, D12, D14, D15 gas, RC, I-40, I-400, I-60, I-600Replaces: 70232325USA made

ACS295 $16.95 Oil Pan GasketFits: WC, WD, WD45, WF, D17, 170, 175 gas, Replaces: 70233602 (side gasket); 70236660 (WD, WD45 end gasket; D17, 170, 175 end gasket); 70229178 (main bearing cap gasket)

ABC2823 $12.95 NEW! Oil Pan GasketFits: 160, 6040 w/ Perkins 3-cyl. 144", 152" gas, diesel, Replaces: 7208178, 7208180, 7208181 NOTE: See website for additional applications.

Oil filters, partOrder # Price Application

ABC006 $19.95Oil Filter fits: B, IB, C, CA, G, RC, WC, WD, WF, WD45 & WD45 diesel; D10, D12, D14, (D17 gas, LP up to SN: 24001) w/ spin on-style filter, Replaces: 70240912(4-5/8" tall) USA madeNOTE: Threaded neck type

ABC007 $9.85 Oil Filter fits: D15, (D17 SN: 24001 & up) All gas, LP; 170, 175 gas, diesel (All w/ spin on-style)Replaces: 70251381(5-1/4" tall, 3.675" O.D.)USA made

ABC149 $7.40

Oil Filter fits: 160, 6040 (All diesels) w/ cartridge-style filterReplaces: 2080205(4-1/2" tall, 2-3/4" W)

ACS2397 $3.65 Oil Filter Base to Block GasketFits: B, C, CA, D10, D12, D14, (D17 up to SN: 24001), IB, RC, WC, WD, WD45, WF (All gas, LP), Replaces: 70233228(4-13/16" length, 1-1/2" tall, 3-1/2" c.c. mounting holes) USA madeNOTE: Made of cork.

Underside view





http://www.steinertractor.com/JDS500












Alli

sCh

alm

ers Muffler bracket

Fits: Early D17 gas, Styled WC, WD, WD45; Will also fit the B, C, CA, RC if customer trims approximately 1" off the length & redrill one hole if needed

Description Order # Price

Muffler Bracket ........................................................ACS1762 ............ $4.95

MufflersOrder # Price Application

ACS067 $44.95

Fits: GReplaces: 70800458NOTE: Exact of original.

ACS082 $51.60 Fits: B, IB, C, CA (1938-57) under hoodReplaces: 70210081 USA madeACS082 (Vertical round body) Dimensions:Inlet length: 1", Inlet O.D.: 1-1/2", Shell length: 4-1/4", Shell diameter: 4-1/2" x 9", Outlet length: 3-3/4", Outlet O.D.: Bent pipe, Overall length: 9"

ACS101 $25.70 Fits: B, IB, C, CA, RC (1938-57) above hood except low octane engineReplaces: 227240 USA made

ACS101 (Vertical round body) Dimensions:Inlet length: 7", Inlet O.D.: 1-1/2", Shell length: 12-3/4", Shell diameter: 3-1/4", Outlet length: 9-1/4", Outlet O.D.: 1-1/2", Overall length: 29", If raincap is needed - order RCS003

ACS103 $37.85 Fits: B, IB, C, CA (1938-57) thru hood, D10, D12, D14, D15 gas up to SN: 9001Replaces: 70227240, 70233450 USA madeNOTE: Includes bracket.ACS103 (Vertical round body) Dimensions:Inlet length: 2-1/2", Inlet O.D.: 1-1/2", Shell length: 16-1/2", Shell diameter: 3-1/4", Outlet length: 10", Outlet O.D.: 1-1/2", Overall length: 29", If raincap is needed - order RCS003

ACS105 $30.25 Fits: WC SN: 106509 & up, WD gas(1948-53), WD45D thru hoodReplaces: 70219534USA madeACS105 (Vertical round body) Dimensions:Inlet length: 2-1/2", Inlet O.D.: 1-3/4", Shell length: 16-1/2", Shell diameter: 3-1/4", Outlet length: 10", Outlet O.D.: 1-3/4", Overall length: 29", If raincap is needed - order RCS004

Engi

ne p

arts

Oil pump kitFits: G w/ N-62 Continental engineReplaces: 70800264, 70800266, 70800267, 70800271, 70800273, 70800658USA made


Oil Pump Kit ............................................................ACS322 ......... $176.70NOTE: Must size bushing to fit.

Flywheel ring gears


ACS032 $64.95 Fits: G w/ N-62 Continental engineReplaces: 70800311(9.199" I.D., 10.950" O.D.)NOTE: Has 86 teeth.

ABC013 $49.35 Fits: B, IB, C, CAReplaces: 70209292NOTE: Has 90 teeth.

ABC014 $56.25 Fits: RC, WC, WD, WD45 gas, WFReplaces: 70208132NOTE: Has 100 teeth.

ACS206 $59.95 Fits: D10 SN: 3501 & up, D12 SN: 3001 & up, D14 SN: 19001 & up & engine SN: 19070 & up, D15 gas, I60, I500, I600Replaces: 70233196NOTE: Has 116 teeth.

Economy muffler clampsUSA made

Order # Price Dimensions

ABC568 $2.95 (1-1/2" clamp)ABC570 $2.95 (1-5/8" clamp)ABC572 $2.95 (1-3/4" clamp)ABC574 $3.25 (1-7/8" clamp)ABC576 $3.25 (2" clamp)ABC578 $3.25 (2-1/4" clamp)ABC580 $3.25 (2-1/2" clamp)ABC583 $4.95 (2-3/4" clamp)ABC585 $4.95 (3" clamp)ABC2234 $4.95 (3-1/2" clamp)ABC1771 $7.95 (4" clamp)
























Allis

Chalmers

Mufflers cont...Order # Price Application

ACS107 $34.95 Fits: (D17 up to SN: 32000 gas, LP), G226, W226, Late WC, WD, WD45 gas (1953-57)Replaces: 70229531 USA made

ACS107 (Vertical round body) Dimensions: Inlet length: 2-1/2", Inlet O.D.: 1-3/4", Shell length: 16-1/2", Shell diameter: 3-1/4", Outlet length: 10", Outlet O.D.: 1-3/4", Overall length: 29", If raincap is needed - order RCS004

ACS327 $52.40 Fits: D15 gas SN: 9001 & up, I60, I600Replaces: 70237811 USA made

ACS327 (Vertical oval body) Dimensions: Inlet length: 3-1/4", Inlet I.D.: 1-3/4", Shell length: 12-1/2", Shell diameter: 4-1/2" x 9", Outlet length: 12-1/2", Outlet O.D.: 1-3/4", Overall length: 27", If raincap is needed - order RCS004 & if clamp is needed - order ABC572.

ACS330 $57.50 Fits: D17 gas SN: 42001 & upReplaces: 70246129 USA made

ACS330 (Vertical oval body) Dimensions: Inlet length: 4-3/4", Inlet I.D.: 1-15/16", Shell length: 16-1/4", Shell diameter: 4-1/2" x 9", Outlet length: 8", Outlet O.D.: 2", Overall length: 29", If raincap is needed - order RCS005 & if clamp is needed - order ABC572.

ACS2235 $59.95Fits: 180, 185 gas, dieselReplaces: 70248883 USA madeNOTE: Black finish.

ACS2235 (Vertical oval body) Dimensions: Inlet length: 2-3/4", Inlet I.D.: 2-3/8", Shell length: 16-1/4", Outlet length: 15", Outlet O.D.: 2", Overall length: 34"

ACS2231 $79.95 Fits: 190 up to SN: 19000 (Non turbo) under hood gas, dieselReplaces: 70243283 USA madeNOTE: Silver finish. Use w/ ACS2233 straight pipe.ACS2231 (Horizontal round body) Dimensions: Inlet length: 2", Inlet I.D.: 2-3/8", Shell length: 18", Outlet length: 2-3/4", Outlet O.D.: 2-3/4", Overall length: 18"

Raincaps

Order # Price Dimensions

RCS002 $9.65 (1-1/4" - 1-7/16" I.D.)RCS003 $9.80 (1-1/2" - 1-11/16" I.D.)RCS004 $9.95 (1-3/4" - 1-15/16" I.D.)RCS005 $10.35 (2" - 2-3/16" I.D.)

Raincaps cont...Order # Price Dimensions

RCS006 $10.75 (2-1/4" - 2-7/16" I.D.)RCS007 $10.95 (2-1/2" - 2-11/16" I.D.)RCS009 $13.35 (3" - 3-3/16" I.D.)RCS014 $34.80 (2-1/2" I.D.) USA made

NOTE: Chrome plated.RCS015 $41.95 (3" I.D.) USA made

NOTE: Chrome plated.RCS016 $45.95 (3-1/2" I.D.) USA made

NOTE: Chrome plated.

Exhaust pipeFits: 190 gas, diesel (use w/ ACS2231 muffler), 190XT; Serviceable for D21Replaces: 70244555, 70243284(Inlet and outlet I.D.: 3", o/a length: 40")USA made


Exhaust Pipe ............................................................ACS2233 ...........$37.95NOTE: Black finish.

Exhaust stacks - USA madeChrome; Double wall (Lined)

Fits: B, IB, C, CA, RC, D10, D12, D14, (D15 up to SN: 9001) (All w/ thru hood mufflers)(3" O.D.; 24" body + 5" base =29" o/a Chrome; Double wall (Lined))


Exhaust Stack (Straight) .......................................ACS230 ............$107.65

Exhaust Stack w/ Bend .........................................ACS231 ............$125.95NOTE: Customer must enlarge hole for B thru CA w/ 2-1/2" hood exhaust hole. For ACS230 use RCS015 raincap.

Fits: D17 gas except series IV, WC, WD, WD45 gas(3-1/2" O.D.; 22-1/2" body + 6-1/2" base = 29" o/a Chrome; Double wall (Lined))


Exhaust Stack (Straight) ......................................ACS187 ............ $115.35

Exhaust Stack w/ Bend ........................................ACS186 ............ $135.95NOTE: For ACS187 use RCS016 raincap.

Engine parts

ACS230 ACS231

ACS187 ACS186







http://www.steinertractor.com/RCS002
















Alli

sCh

alm

ers Choke parts


ACS344 $24.95 Choke Rod Fits: G, Replaces: 800118(27 1/8" o.a. length)USA made

ABC423 $9.95 Universal Choke Cable Fits: Tractors, Forklifts & other applications using 72" or less cableNOTE: Metal sheathed. Cut to length. Can also be used as a 'Stop' cable for diesel engines.

JDS718 $18.75 Universal Choke Cable Fits: Tractors, Forklifts & other applications using 47"or less cable(47" long) NOTE: Metal sheathed w/ "CHOKE" on knob. Cut to length.

ABC2426 $7.50 Choke or Fuel Shut Off Cable Clip (For Marvel Schebler choke cable bracket) Fits: D15 SN: 9001 & up, D17 SN: 42001 & up, D19, 170, 175, H3, I500, I600; Also works for diesel fuel cable shut off for 7000 thru 7580, Replaces: 74047137NOTE: See website for a complete listing of applications & carburetor numbers.

ACS2699 $7.95 NEW! Choke Knob fits: D10 up to SN: 3501, D12 up to SN: 3001, D14, D17 up to SN: 32001, (D17 diesel up to SN: 32001 as a fuel shut off knob), Replaces: 70228321(1/4" - 20 thread, 1.035" O.D.) USA made

Carburetors, partsNOTE: Can't find your carburetor number? Look on page 321.

Carburetors are limited to replacement only - NO refunds.

No replacement will be given if dirt, rust, etc. is found in the

carburetor or if it has been taken apart.


ACS084 $375.50 Carburetor Fits: G w/ Marvel Schebler TSV 13 Replaces: 70800303 (1-13/16" c.c. carb mounting holes) NOTE: Does not say "Marvel Schebler," but has "TSV13" brass tag. Like original.

ABC223 $358.90 Carburetor New, Zenith Replacement Fits: B, IB, C, CA, D10, D12, Replaces Marvel Schebler: TSX 154, 159, 305, 422, 470, 486, 670, 701, 815, Replaces: 9705, 9706, 9797, 9804, 11141, 11142, 12401, 12522, 12566, 12749 USA madeNOTE: Has 1-1/8" throttle bore. May have to trim throttle shaft on some applications. Will fit manifolds w/ 2-5/16" - 2-3/8" c.c. stud holes because of the smaller dia. studs that are included.

Carburetors, parts cont...Order # Price Description / Application

ABC297 $7.50 Carburetor Fuel Inlet Elbow & Strainer Assy. fits: Allis Chalmers models(Male end (Screen end) - 1/8" pipe thread; female end - 1/4" flare)NOTE: Must have internal threads. Used w/ flair fitting; NOT compression fitting.

ABC564 $26.40 Main Jet Adjustment Needle Assembly (For Zenith carburetors) Fits: D10, D12 w/ carb 12401, 12577, 12749; WC, WD w/ carb 9707, 10981, 14012Replaces: 70223897(3/8" x 24" thread) USA made

ABC557 $29.95 Main Carburetor Nozzle(For Zenith carburetors) Fits: B, IB, C, WC, WF, WD (All w/ carb 9707, 9707A, 9707B, 10981, 10981A, S1203) Replaces: 70223893, C66-47-50 USA made

ABC1156 $23.95 Main Carburetor Nozzle(For Marvel Schebler carburetor) Fits: B, IB, C, RC (All w/ TSX154, 305)Replaces: 70222047, 47-270

ABC133 $6.15 VITON Needle Float Valve(For Marvel Schebler carburetors) Fits: D15 SN: 9001 & up, D17, D19, WD45, 170, 175 (All w/ TSX 464, 561, 591, 773, 783, 821, 848, 853), Replaces: 70226458, 133-543 (0.100" orifice) USA madeNOTE: VITON needle & seat helps stop carburetor flooding.

ABC230 $6.45 VITON Needle Float Valve (For Marvel Schebler carburetors) Fits: B, C, CA, D14, D15, G, IB, RC, WC, WD, WF All w/ TSX 154, 159, 305, 422, 470, 486, 670, 701, 815, 844, 879, 912, 931, 986, 990 (All TSV series)Replaces: 70244912 (.080 orifice)USA made NOTE: Viton needle & seat helps stop carb flooding.

ABC513 $2.50 Throttle Body Repair Bushing (For small bowl Marvel Schebler carburetors) Fits: B thru D15 (.383" O.D., .247" I.D., .501" long) USA made NOTE: Repairs worn throttle body using 1/4" throttle shafts. Must ream to size.

ABC1159 $5.00 Throttle Disc (For Marvel Schebler carburetor) fits: B, IB, C, CA, RC, WC, WD, WF (All w/ TSX154, 159, 305, 422, 470, 486) Replaces: 70219971, 14-175(15°, 1.105" O.D.) USA made

ABC1182 $18.50 Choke Disc (For Marvel Schebler carburetor) fits: B, C, CA, IB, RC, WD45 (All w/ TSX154, 305, 464, 470) Replaces: 70219984, 27-530, 27-539(1-5/16" O.D.) USA made

Engi

ne p

arts

















Allis

Chalmers

Carburetors, parts cont...Order # Price Description / Application

ABC1171 $35.70 Choke Disc (For Marvel Schebler carburetor) fits: CA, D14, D15 (All w/ TSX670, 701, 815)Replaces: 70229611, 27-573(1-3/8" O.D.) USA made

Carburetor gaskets - USA madeOrder # Price Description / Application

ABC543 $1.95Manifold to Carburetor Gasket Fits: G w/ N-62 Continental engineReplaces: 70800304(1-13/16" c.c. bolt holes, 15/16" center hole)

ABC408 $1.39Manifold to Carburetor Gasket Fits: B, C, CA, D10, D12, D14, D15, D17, IB, RC, WC, WD, WD45, WF, 170, 175 Replaces: 70233209(2-3/8" - 2-7/16" slotted bolt holes, 1-1/8" center hole)

ABC410 $1.39

Manifold to Carburetor Gasket Fits: D19 gas, Replaces: 70238174(2-15/16" c.c. bolt holes, 1-3/4" center hole)

ABC2275 $3.95 Carburetor Gasket Kit (For Big Bowl Marvel Scheblers) Fits: Some WD45, D15, D17, 170 thru 185Replaces: 70226470 NOTE: Fits same carb numbers as FDS212 economy kit on page 18.

Carburetor floatsOrder # Price Application

ACS075 $32.95(For Marvel Schebler carburetors) Fits: G, Power Units w/ TSV 13, 15, 16, 17, 18, 21, 22, 24, 27, 35, 37, 45, 47, 48, 49, 50, 52, 53, 54, Replaces: 70800472, Marvel Schebler 30-667

ABC036 $11.95(For small bowl Marvel Schebler carburetors) fits: B, C, CA, D14, D15, IB, RC, WC, WD, WF w/ TSX 154, 159, 305, 422, 470, 486, 670, 701, 815, 844; Power Units w/ TSX 305, 879, 912, 931Replaces: 70219985, Marvel Schebler 30-600

Carburetor floats cont...Order # Price Application

ABC190 $15.75 (For Zenith carburetors) fits: B w/ carb 9635, A, 9636, A, 9706, 9804; IB, C w/ carb 9635, A, 9636, A, 9706, 9804, 10697, 10698; CA; RC w/ carb 9492, 9507; WC w/ carb 10981; WD, WF, D10 w/ carb 12577, A, 12749; D12 w/ carb 12749; D14, D15 w/ carb 8561, 8979, 9635, A, 9636, A, 9705 9706, 9707, 9797, 9804, 9805, 10697, 10698, A, 10699A, 10902, 10903, 10981, 11141, 11142, 12401, 12749, 12522, 12566, 14544; Power Units w/ carb 10697, 12621, 12658, 14015, 14025, Replaces: Replaces: 70223920, Zenith C85-28

ABC037 $19.95 (For Marvel Schebler carburetors) Fits: D15, D17, WD45, 170, 175, 180, 185 (All w/ TSX 464, 561, 773, 869, 871, 928); Power Units w/ TSX 466, 561, 719, 773, 853, 950, 992, 1001, Replaces: 70226456, Marvel Schebler 30-739, 30-631

IHS575 $78.50(For Zenith K5 carburetors) Fits: M, U, UC (All w/ carb 6496, 6699, 6817) (Fits OEM carb U1750, 2043, 2212)Replaces: 70223922

ABC454 $35.75

(For Zenith carburetors) Fits: U w/ carb 10380, Power Units w/ carb 12504

ABC452 $23.60 (For Zenith carburetors) fits: D15, D17, WD45 (All w/ carb 12232); 170, 175 (Both w/ carb 11588, 12217, 12232, 12287A, 12590, 12722A, 12920, 13268, 13294, 13416, 14991), 180; Power Units w/ carb 13151, 13153, 13154, 13161, 13596, 13628, 13956Replaces: 70227103

ABC361 $29.50(For Marvel Schebler carburetors) Fits: D19 w/ TSX 848; Power Units w/ TSX 160, 268, 591, 621, 783, 786, 821, 848, 876, 918, Replaces: 74055431

ABC1352 $55.40(For Holley carburetors) Fits: Early 190Replaces: 74056661, LIST2871,2871-1, LIST3257,3257-1

ABC1355 $22.80

(For Zenith 63-11, 63-12, 69 series carburetors) Fits: 190 w/ carb 12777, 13303, 13327, 13343 Replaces: 74046589

Engine parts


















Alli

sCh

alm

ers Carburetor repair kits

NOTE: Can't find your carburetor number? Look on page 321.

Economy carburetor repair kits contain: Needle & seat, float

lever pin, seal, gaskets & instructions.

Basic carburetor repair kits contain: Throttle shaft, needle

& seat, float lever pin, seal, gaskets & instructions.

Complete carburetor repair kits contain: Choke & throttle

shafts, needle & seat valve, float lever pin, miscellaneous plugs

& screws, throttle shaft seals, adjustment screw & gaskets.


Economy carburetor repair kits - USA made

ACS051 $24.95

Economy Carburetor Repair Kit(For Marvel Schebler carburetors) Fits: G, Power Units w/ TSV carbs

ABC220 $22.50 Economy Carburetor Repair Kit(For Marvel Schebler carburetors) Fits: B, C, IB, RC (All w/ TSX 154, 305); CA w/ TSX 470, 486, 670, 701, 815; D14 w/ TSX 670, 701, 815; D15 w/ TSX 815, 844; WC, WD, WF (All w/ TSX 159, 422); H3, Power Units (both w/ TSX 879, 912, 931, 986, 990)

ABC1346 $25.70 Economy Carburetor Repair Kit (For Zenith carburetors) fits: B, C, CA, D10, D12, IB, RC, WC, WD, WF (All w/ carb S906, S1203, S1204, S1585, 8561, 8691, 8781, 8979, 9635, 9636, 9705, 9706, 9707, 9707A, 9707C, 9804, 9805, 10697, 10697A, 10698, 10698A, 10699, 10699A, 10902, 10902A, 10903, 10903A, 10981, 10981A, 11141, 11141A, 11142, 11142A, 12262, 12273, 12401, 12577, 12577A, 12749, 14544)NOTE: Fits 61, 68, 161 series Zenith carbs.

ACS1343 $24.30 Economy Carburetor Repair Kit (For Zenith carburetors) Fits: D19, 180, 190, 190XT (All w/ carb 12511, 12540, 12777, 12893, 13303, 13343) Replaces: 4021805, 4022025; K2039, K2040 (Zenith kit); 4059661, 74062473 (kit)

ABC222 $24.95

Economy Carburetor Repair Kit (For Zenith carburetors) Fits: WC, WF (both w/ carb 6793, 7071, 7078, 7078A, B, C, 7178, 7971, 8672)

FDS212 $21.95 Economy Carburetor Repair Kit(For Marvel Schebler carburetors) Fits: D15 w/ TSX 869; D17 w/ TSX 561, 869, 871; D19 w/ TSX 848; WD45 w/ TSX 464, 561, 773, 836, 871; 170, 175, 180, 185 (All w/ TSX 928); D Grader, Power Units (both w/ TSX 719, 853, 950)

Carburetor repair kits cont...Order # Price Description / Application

Economy carburetor repair kits - USA made cont...

ABC552 $21.95Economy Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: D15 w/ TSX 591, 839, 863; Power Units w/ TSX 783, 821, 876, 918

ABC1349 $24.95 Economy Carburetor Repair Kit (For Zenith carburetors) Fits: D17, 170 (both w/ carb 11588, 12217, 12232, 12590, 13294, 13416)Replaces: Zenith K2048, K2049, K2050, K2127, K2136

ABC1918 $34.95 Economy Carburetor Kit (For Holley carburetors) Fits: Early 190 w/ Holley # LIST2871, LIST2871-1, LIST3257, LIST3257-1. Also fits OEM carb #'s 4020206, 4020418, 4020985, 4020986 NOTE: Includes repair components for acceleration pump, piston assy. spring, and retainer. Float valve seat & diaphragm not included. Basic carburetor repair kits

ACS306 $69.65

Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: G w/ TSV 13

ABC473 $37.75

Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: B, IB, C, CA, RC (All w/ TSX 154, 305, 470, 486, 670, 701, 815)

ABC177 $38.50

Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: WC, WD, WF (All w/ TSX 159, 422)

ABC216 $39.95

Basic Carburetor Repair Kit(For Marvel Schebler carburetor) Fits: D17, WD45 (both w/ TSX 464, 561, 773, 797, 871)

IHS574 $54.70Basic Carburetor Repair Kit (For Zenith K5 carburetors) Fits: IU, M, U, UC (All w/ carb 6496, 6699, 6817) (Fits OEM carb U1750, 2043, 2212)

Engi

ne p

arts
















Allis

Chalmers

Carburetor repair kits cont...Order # Price Description / Application

Complete carburetor repair kits

ABC232 $48.50 Complete Carburetor Repair Kit (For Zenith carburetors) Fits: B, IB, C, RC (All w/ carb 9705, 9706, 9804, 10697, 10698, 10698A, 10902A, 10903A) (Fits OEM carb 211954, 224640, 224641)

ACS1385 $43.20

Complete Carburetor Repair Kit (For Zenith carburetor) Fits: CA w/ carb 11141, 11142 (Fits OEM carb 225621, 225622)

ABC1311 $48.55Complete Carburetor Repair Kit (For Zenith carburetor) Fits: RC w/ carb 9492, 9507 (Fits OEM carb 209662, 209663)

ABC178 $53.50 Complete Carburetor Repair Kit (For Zenith carburetors) Fits: WC, WD, WF (All w/ carb 8979, 9707, 9707A, 9707C, 10981, 10981A) (Fits OEM carb 209312, 213348, 224749)

Governor, partsOrder # Price Description / Application

ACS166 $169.95 NEW! Governor (For Magneto Ignition) Fits: B, C, CA, IB, RCReplaces: 70207583(3.775" o/a length) NOTE: For magneto ignition or for tractors w/ aftermarket distributor kit DELCO #1111411. Will NOT fit factory Allis Chalmers distributor.

ACS317 $94.50NEW! Governor Gear Fits: D17, 170, 175 w/ 4-cylinder 226" gasReplaces: 70229510, Casting AM4479NOTE: 27 teeth. Weights & pins sold separately.

ACS318 $24.50 NEW! Governor Weight Fits: D17, WC, WD, WD45, WF, 170, 175 w/ 4-cylinder 201 or 226" gasReplaces: 70229980 NOTE: 2 used per tractor; Sold individually.

ACS319 $3.65 NEW! Governor Weight Pin w/ (2) Clips Fits: D17, WC, WD, WD45, WF, 170, 175 w/ 4-cylinder 201 or 226" gas enginesReplaces: 70207719 (clip), 70211368 (pin) USA made NOTE: 2 pins used per tractor; Sold individually.

Governor, parts cont...Order # Price Description / Application

ACS182 $7.95 Governor Control Rod Spring Fits: G, Replaces: 70800248(2-1/2" o/a length; 11/16" O.D.) USA made

ACS304 $12.50 Governor Rod Linkage Spring (For distributor or magneto ignition) Fits: B, IB, C, CA, D10, D12, D14, D15, RC, I-40, I-400, I-60, I-600Replaces: 70212321

Radiators, partsOrder # Price Description / Application

ACS128 $273.00 Radiator (Pressurized) Fits: B, IB, C, CA, (D10 up to SN: 3501), D12 up to SN: 3001Replaces: 70232113(CORE measurements: 14-3/4" height, 15" width, 2-1/4" depth. These are not overall dimensions)NOTE: Must use ACS209 or ABC008 radiator caps only.

ACS114 $310.95 Radiator (Pressurized) Fits: Styled WC, WD, WD45 gas, WF Replaces: 70228587(CORE measurements: 18-1/2" height, 18" width, 1-3/8" depth. These are not overall dimensions)NOTE: Will fit tractors w/ 4 blade fan only, not 5 blade fan. Fan shroud opening is 17-1/8" so customer may have to trim to clear or order ACS183 Fan.

ACS109 $499.75Radiator Fits: D17 gasReplaces: 70229702(CORE measurements: 19-1/4" H, 18" W, 2" D These are not overall dimensions)

ABC455 $2.95Radiator Mounting Pad Fits: Most Allis Chalmers models(2" x 2", 1/4" thick)NOTE: 2 used per tractor; Sold individually.

ABC209 $2.95Radiator Drain Plug Fits: B thru 8550, Replaces: 912415(1/4"-18 NPT) USA madeNOTE: See website for full applications.

Radiators, parts continue on next page

Engine / Cooling parts


















Alli

sCh

alm

ers Radiators, parts cont...


ACS192 $32.50 Lower Water Pipe Fits: B, IB, C, CA, RCReplaces: 70227184(1-1/8" O.D. x 10)

ACS249 $34.95Lower Water Pipe Fits: D10, D12, D14, D15 gas, LPReplaces: 70233431

Radiator caps w/ gasketsOrder # Price Application

MHS045 $12.95 (For Non-Pressurized systems) Correct for B up to SN: 101; Serviceable for B up to SN: 61222 & C up to SN: 18580 (ACS172 is correct for these applications), Replaces: 70206459(1.761" tang length)

ACS172 $19.95 (For Unpressurized systems)Fits: B up to SN: 61221, IB to SN: 1000, C up to SN: 18580, RC, Styled WC, Styled WF, Replaces: 70207244NOTE: Fits original radiator only, not aftermarket. Original style.

MHS043GK $1.50Gasket only (For ACS172)(2.622" O.D., 1.500" I.D., 0.100" thick)NOTE: Rubberized cork gasket.

IHS337 $9.95 (For Unpressurized systems) Fits: Unstyled WC, Unstyled WF, Power Unit: W201, Replaces: 70206622(2.886" O.D., 0.398" tang width, 1.845" inside center dia.)

IHS239 $1.95Gasket only (For IHS337 Cap)(3.563" O.D., 1.875" I.D., .125" thick)NOTE: NBR rubber.

ABC008(4 PSI)

$8.75

(For Pressurized systems) Fits: B SN: 61221 & up, C SN: 18581 & up, CA, G, RC, WC SN: 74430 & up, WD, WD45, WF, Replaces: 70228545(1.500" radiator neck I.D., 2.330" O.D., 2.000" tang to tang)

ABC1396(7 PSI)

$8.95

Radiator caps w/ gaskets cont...Order # Price Application

ACS209 $14.95 Fits: B SN: 61221 & up, C SN: 18580 & up, CA, D10, D12, D14, D15, D17, D19, D21, G, H3, HD3, WC SN: 74430 & up, WD, WD45, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, I-40, I-400, I-60 & I-600, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550, Replaces: 70254891NOTE: Original style

Radiator hoses, clampsOrder # Price Description / Application

ACS208 $2.55 Radiator Hose (Upper / Lower) Fits: B, IB, C, CA, D10, D12, D14, RC Replaces: 70207173(1-1/8" I.D., 1-5/8" O.D., 2-1/4" long)

ABC055 $6.05 Radiator Hose (Upper/Lower) Fits: (Upper for WC, WD, WD45, WF); (Lower for Early D17 diesel up to SN: 38963), Replaces: 70233153(1-7/16" I.D., 10" long, 1-13/16" O.D.)

ABC406 $6.95 Radiator Hose (Lower) Fits: WC, WD, WD45 gas, WFReplaces: 70203090(1.485" I.D., 1.875" O.D., 5.485" long)

ACS259 (Upper)

$14.90

Radiator Hose Fits: D17 gasACS259 Replaces: 70229636ACS257 Replaces: 70229209(1-1/2" I.D., 1-13/16" O.D.)

ACS257 (Lower)

$15.90

ACS2248 $12.50 Water ByPass Hose Fits: WD45, W226 gas Power Unit SN: 50789 & up, Replaces: 70227018 USA made

ACS2252 $12.95 Water ByPass Hose Fits: D17, 170, 175 gas, LPReplaces: 70229341

ABC492 $2.70 Clamp (For Upper / Lower) Fits: B, IB, C, CA, D10, D12, D14, RCReplaces: 911290(For 1-5/8" hose O.D.)NOTE: Will fit ACS208 radiator hose.

FDS258 $3.60 Clamp (For Upper / Lower 1-3/4" to 2" O.D. Radiator Hose) fits: D17 gas, Early D17 diesel up to SN: 38963, WC, WD, WD45 gas, WF, Replaces: 921912, 921913NOTE: Will fit ACS259, ACS257, ABC055, ABC406 radiator hoses.

Cool

ing

part

s

Underside view

Underside view

Underside view

Underside view

Underside view



http://www.steinertractor.com/MHS045


http://www.steinertractor.com/MHS043GK
















Allis

Chalmers

Thermostats, partsOrder # Price Description / Application

IHS913 $34.95 Thermostat fits the following equipped w/ 4-bolt water manifold bypass: B w/ engine SN: 126210 & up, C w/ engine SN: 60157 & up, CA w/ engine SN: 195136 & up; All D10 thru D-17, WD45, 170, 175 gas, LPReplaces: 226505, 70229927(160º Temp)

ABC1086 $13.50Thermostat fits: D10, D12, WC, WD, WFReplaces: 70210157(180º Temp)USA made

ABC052 $11.50 Thermostat fits: B, C CA, IB (All w/ cast iron 2 bolt thermostat housing, must reuse spacer spring); Late D17 diesel, D21, 180, 185, 190, 190XT, 210, 220, 6040, 7000 - 8070 Replaces: 70209720, 74025103, 72080437(160º Temp) USA made NOTE: Gasket included fits Ford models only.

ACS1214 $49.95 Thermostat Housing Bypass Cover Fits: WD45, D17, 170, 175, (W226 Power Unit SN: PO97614 & up) gas; Combines: E3, K gas, Replaces: 70262804NOTE: If gasket is needed order ACS1571 gasket.

ACS1219 $49.95 Thermostat Housing Cover Fits: WC, WD, WFReplaces: 70262805NOTE: If gasket is needed order ACS1571.

ACS1571 $6.50 Thermostat Housing Gasket only Fits the following w/ 201, 226" gas, LP: D17, WC, WD, WD45, WF, 170, 175Replaces: 70210158 USA madeNOTE: Cork.

Water pumpsNOTE: NEW; No core charge


ACS227 $125.65 Fits: B, IB, C, CA, (Early D10, D12 w/ sheet metal pulley), RC D14, (Early D15 w/ sheet metal pulley), RCReplaces: 70250397NOTE: Will NOT fit engines w/ cast pulley.

ACS2795 $124.95

NEW! Fits: 'Some' D10, D12, D15 gas, LP & Industrials all w/ FIXED cast iron pulley, Replaces: 233394, 79004256NOTE: See website for full applications. Includes pulley, backing plate and gasket.

Water pumps cont...Order # Price Description / Application

ACS229 $135.22

Fits: WC, WD, WD45 gas, WFReplaces: 70250396

ACS2799 $125.80

NEW! Fits: D17, 170, 175 w/ Late 226" gas, LP engines, Replaces: 229465, 79003710NOTE: Includes cast iron pulley, backing plate & gasket.

Fan bladeFits: D17 gas, diesel, WC, WD, (WD45 gas, diesel), WF, Replaces: 70240973(16-7/8" O.D. tip to tip, 3-7/8" blade width, 1" pilot, 1-1/4" c.c. bolt holes, 5/16" bolt hole dia.)


Fan Blade (4 Blade) ................................................ACS183 ............ $22.30

Fan beltsNOTE: Verify belt size before ordering.


ABC059 $11.80 Fits: G, (WC, WF both w/out generator)Replaces: 800116, 70203073(Notched; 5/8" x 40")

ABC009 $12.95 Fits: B, IB, C, CA, D10 up to SN: 3501, D12 up to SN: 3001, D14 (All w/ generators)Replaces: 70209656(5/8" x 36-1/2")

ABC010 $14.95 Fits: WC, WD, WD45 gas, WF (All w/ generators), Replaces: 70209824(5/8" wide x 45-1/2" long)

ABC1648 $15.50 Fits: D17, D19 gas, LP, 6040 (fan)Replaces: 70229211(17/32" x 45-1/4")

ABC414 $11.55 Fits Deutz-Allis: 5220, 5230 (both fan/alt)Replaces: 71131774, 70237386(1/2" x 41-1/4")

FDS1453 $12.50 Fits: 6060, 6070, 6080 (fan/alt) Replaces: 70263408(1/2" x 53-1/4")

Cooling parts




















Alli

sCh

alm

ers Traction booster gauge

Fits: CA, (D10 up to SN: 9199), (D12 up to SN: 9167), D14, (D15 up to SN: 9000), D17 up to SN: 75000), D19, WD, WD45Replaces: 70235598(1/4" male flare end)


Traction Booster Gauge ........................................ACS124 ............. $99.95 w/ "Allis Chalmers" nameNOTE: Functional, like original!

Amp gauges w/ stainless steel bezelUSA madeACS Gauges have a glass lens & stainless steel bezel. Includes

"ALLIS CHALMERS" name. For 2" diameter hole. ABC Gauges

have a stainless steel bezel & vary from original appearance.

Does not include "ALLIS CHALMERS" name.


ABC016 $12.25

(20-0-20) Fits: B, IB, C, CA, G, WC, WD, WD45, WD45 diesel, WF, RC, Replaces: 70208302NOTE: No logo.

ACS258 $29.95 (30-0-30) Fits: B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, H3, HD3, RC, WC, WD, WD45, WD45 diesel, WF, 170, 175, 180, 185, 190, 190XT, 200, 210, 220Replaces: 70254407NOTE: Includes "Allis Chalmers" name.

ABC109 $12.25

(30-0-30) Fits: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, I-40, I-400, I-60, I-600, Replaces: 70254407NOTE: No logo.

ACS1833 $29.95(60-0-60)(For tractors converted to 12-v system) Fits: B thru WD45; D10 thru D21; 160 thru 220 NOTE: Includes "Allis Chalmers" logo. See website for additional applications.

ABC466 $14.95

(60-0-60) Fits: B thru 220 w/ Alternator systemNOTE: No logo.

Oil pressure gauges w/ stainless steel bezelNOTE: ACS Gauges have a metal base, glass lens & stainless

steel bezel. Includes "ALLIS CHALMERS" name. For 2" diameter

hole. ABC Gauges have a stainless steel bezel & vary from

original appearance. Does not include "ALLIS CHALMERS"

name.

When ordering a dash mounted oil pressure gauge you will also

need to order (1) of the following fittings depending on the line

size to adapt your existing line to the gauge: ABC538, IHS626.


ABC004 $18.95BACK IN STOCK! (0-30 PSI) Fits: B, IB, C, CA, G, RC, WC, WD, WD45, WF, Replaces: 70207834(1/8" NPT male thread)NOTE: Engine mounted. Screws into oil filter housing. No logo.

ACS159 $29.95 (0-30 PSI) Fits: B, C, CA, G, IB, RC, WC, WD45; Some U, UC (Both w/ SN: 15345 & up & w/ engine mounted oil pressure gauge)Replaces: 70203805, U3805(1/8" NPT male thread) NOTE: Engine mounted. Includes "Allis Chalmers" name. Screws into oil filter housing.

ACS160 $29.95 (0-45 PSI) Fits following gas, LP: D10, D12, D14, D15, D17, I-40, I-400, I-60, I-600 Replaces: 70228718, 70228719(1/8" NPT male thread)NOTE: Dash mounted. Includes "Allis Chalmers" logo. Line adapter sold separately.

ACS262 $34.95 (0-80 PSI) Fits the following gas: Some A, D19, (U, UC up to SN: U15344 w/ dash mounted gauge); Fits the following diesels: D15, D17, D19, WD45, Replaces: 70232546(1/8" NPT male thread) NOTE: Dash mounted. Includes "Allis Chalmers" name. Line adapter sold separately.

ABC082 $18.95(50 PSI) Fits: D10, D12, D14, D15, D17 series I & II, I-40, I-400, I-60, I-600, WD45 dieselReplaces: 70228719 (1/8" NPT male thread) NOTE: Dash mounted. No logo. Line adapter sold separately.

ABC005 $18.95

(80 PSI) Fits: D15 diesel thru 220Replaces: 70200197(1/8" NPT male thread)NOTE: Dash mounted. No logo.

Gau

ges














Allis

Chalmers

Fuel gauges w/ gasket & stainless steel bezelACS Gauges have a glass lens & stainless

steel bezel. Includes "ALLIS CHALMERS"

name. For 2" diameter hole.

NOTE: Available Summer 2015.


ACS2640 $74.95 NEW! Fits: D10, D12, D14, D15, ED40, H3Replaces: 227865, 70227865

ACS2651 $74.95 NEW! Fits: D17 gas, dieselReplaces: 229188, 70229188

Tachometers / operation meter, partsOrder # Price Description / Application

ACS311 $189.95

Tachometer / Operation Meter Fits: D10 & D12 both up to SN: 9000Replaces: 70232189 (tachometer), 70232177 (1 bracket), 70232176 (mounting clamp) NOTE: Has AC logo.

ACS312 $28.00Tachometer Cable w/ Nylon Sheath Fits: D10 & D12 both up to SN: 9000Replaces: 70244104(41-3/8" long w/ key)NOTE: Measure before ordering.

JDS1802 $39.95

Tachometer Cable w/ Nylon Sheath Serviceable for D10 & D12 both up to SN: 9000 (43-1/8" long w/ key) NOTE: Measure before ordering.

ACS265 $78.95

Tachometer / Operation Meter Fits: D14, (D15 gas up to SN: 6630), D17 gas, I-40, I-400, Replaces: 70242376, 70276770, 70277450NOTE: Has AC logo.

ACS289 $124.00

Tachometer / Operation Meter Fits: D15 gas SN: 6631 & up, I-60, I-600Replaces: 70236777

Tachometers / operation meter, parts continue on next page

Oil pressure gauges w/ stainless steel bezel cont...Order # Price Description / Application

ABC523 $23.95 Oil Gauge Copper Line Kit For tractors using 1/8" x 6’ copper oil line(6’ - 1/8" line, (2) 5/16 - 24 UNF Nut, (2) compression sleeves, (1) 1/8 - 27 NPTF female to 5/16 - 24 UNF male adaptor, (1) 1/8 - 27 NPTF) NOTE: Use w/ ABC538 fitting.

ABC538 $13.40 Oil Gauge Fitting For gauges w/out removable fittingReplaces: 919095(1/8" pipe thread to 1/8" compression)USA made NOTE: Brass. Use w/ ABC523 line kit.

IHS626 $12.85 Oil Gauge Fitting For gauges w/out removable fitting(1/8" pipe thread to 1/4" compression)USA made NOTE: Brass.

Water temperature gauges w/ stainless steel bezelACS Gauges have a metal base, glass lens & stainless steel bezel.

Includes "ALLIS CHALMERS" name. For 2" diameter hole.

ABC Gauges have a stainless steel bezel & vary from original

appearance. Does not include "ALLIS CHALMERS" name.


ACS064 $29.95

Fits: B, IB, C, CA, RC, WC, WD, WD45, WF Replaces: 70213675NOTE: Threads into radiator neck. Includes "Allis Chalmers" logo.

ACS260 $48.50 Fits: D10, D12, D14, D15 gas, diesel, D17 gas, diesel, WD45 dieselReplaces: 70235724(70" lead 5/8"-18 U.F. end w/ 1/2" NPT pipe bushing) NOTE: Dash mounted. Includes "Allis Chalmers" logo.

ABC239 $27.25Fits: D10, D12, D14, D15, D17, D19, I-40, I-400, I-60, I-600 gas, diesel; WD45 diesel (110º - 230º temperature range, 90º pointer sweep, 72" lead, 5/8-18 UNF w/ 1/2" pipe bushing) NOTE: Dash mounted; No logo.

ABC1593 $29.95

Fits: D10 thru D17(60" lead, 5/8-18 UNF w/ 1/2" pipe bushing)NOTE: Dash mounted; No logo.

Gauges

















Alli

sCh

alm

ers Tachometers / operation meter, parts cont...


ACS1228 $34.95Tachometer Cable w/ Metal Sheath Fits: D14, D15 gasReplaces: 70228767, (cable), 70261609 (key end)(47" long w/ key)

JDS790 $29.95 Tachometer Cable w/ Metal Sheath Fits: D15 diesel, D17 gas, (D21, 190, 190XT diesels w/ camshaft driven tachometer), Replaces: 70229751, (cable), 70261608 (key end)(56" long w/ key)NOTE: Limited supply, replacing w/ nylon sheath.

ACS1505 $174.95

Tachometer / Operation Meter Fits: D17 dieselReplaces: 70230062, 70242374NOTE: Has AC logo.

ACS296 $174.95

Tachometer / Operation Meter Fits: D19 gas, dieselReplaces: 70236655

IHS697 $28.50

NEW! Tachometer Cable w/ Metal Sheath fits: D19 gasReplaces: 70237076, 70261605(61-1/4" long with square ends)

ACS1230 $34.95Tachometer Cable w/ Metal Sheath Fits: D17 diesel, D19 dieselReplaces: 70261604 (cable), 70261608 (key)(61-1/2" long w/ key)

ACS1912 $16.50 Threaded nipple fits: D10, D12, D14, (D15 gas, LP, diesel), D17 gas, LP w/ manual steering, I40, (I60 gas, LP), I400, (I600 gas, LP), 615 gas, LP, Replaces: 70228769(3/4"-20 pipe thread to 7/8"-18, 1.413" long) USA madeNOTE: Zinc dichromate.

ACS1915 $16.50Tachometer Drive Adaptor Fits: D10, D12, D14, D15, D17, I40, I60, I400, I600, 615 gas, LP, Replaces: 70228768(1.561" o/a length, 0.095" key width, .302" O.D.) USA made

Tachometers / operation meter, parts cont...Order # Price Description / Application

ACS278 $174.95

Tachometer / Operation Meter Fits: D21Replaces: 70239731

ACS2803 $49.95 NEW! Tachometer Drive Assembly Fits: D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, Replaces: 246764, 70246764 NOTE: For alternator driven tach drive. Mounts on rear of alternator. 12 & 45 tooth gears. Count teeth before ordering.

ACS2805 $24.95 NEW! Tachometer Driven Gear & Shaft Fits: D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, Replaces: 250488, 70250488NOTE: For alternator driven tach drive. 45 teeth. Count teeth before ordering.

ACS2809 $14.95 NEW! Tachometer Drive Gear Fits: D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, Replaces: 250487, 70250487NOTE: For alternator driven tach cable. 12 teeth. Count teeth before ordering.

ABC1822 $9.502-piece Tachometer Drive Gasket Kit Fits: D21 thru 220Replaces: 70246044, 70251845 USA made

ACS294 $125.00Tachometer / Operation Meter Fits: 190 up to SN: 20599Replaces: 70243569NOTE: Tachometer is driven off camshaft.

ACS303 $124.95 Tachometer / Operation Meter Fits: 190 SN: 20600 & up, 190XT gas, diesel Serviceable for 180, 185, 200, 210, 220, Replaces: 70252409, 70255036NOTE: Tachometer is driven off alternator. Must use w/ 12 & 45 tooth drive gears.

ACS2711 $34.95NEW! Tachometer Cable Fits: D21, 170, 175, 190, 190XT, 210, 220 (All w/ alternator driven tachometer)Replaces: 70256526(64-1/2" long w/ square ends)

ACS2715 $34.95 NEW! Tachometer / Operation Meter Cable fits: 180, 185, 200 alternator driven tachometer; 190, 190XT gas, tachometer driven off camshaftReplaces: 70257353(72-1/2" long w/ square ends)

Gau

ges



















Allis

Chalmers

Electric panelsOrder # Price Description / Application

ACS338 $44.95Instrument Panel Fits: GReplaces: 70800124USA made

ACS353 $74.95 Instrument Panel Trim w/ 1/2" swirls Fits: D15 SN: 9001 & up, D17 SN: 32001 - 75000, D19Replaces: 70234433 USA madeNOTE: Stainless steel w/ 1/2" machine turnings.

ACS197 $28.50

Electric Box Panel (Rear) Fits: RC, WC, WFReplaces: 70208129

Electrical outlet socket, partsOrder # Price Description / Application

ABC395 $24.95Electrical Outlet Socket (For Implements w/ lights) Fits: Allis Chalmers models(2 pin type)NOTE: 2 plated brass pins.

ABC1868 $19.95 Auxiliary Male 2-Pin Connector Plug (For ABC395) Replaces: 70227303(3.045" long, .760" wide, .340" hole dia. for wires) NOTE: Plated brass pins, wires must be soldered or crimped.

ABC2285 $4.95Electrical Outlet Socket Boot Fits: Tractors using single wire outletNOTE: 1 wire style. Does not fit ABC395.

Battery cables - USA madeHeavy Duty; Straight terminals

unless otherwised noted

EO = Eyelet Opening

L = Length

Order # Price Specifications

Ground Cables (Non-Insulated)

ABC401 $13.90 (2 Gauge, EO = 7/16", L = 6")ABC411 $15.80 (2 Gauge, EO = 7/16", L = 9")

Battery boxes, parts - USA made cont...Order # Price Description / Application

ABC405 $17.95 (2 Gauge, EO = 1/2", L = 13")ABC1175 $17.30 (2 Gauge, EO = 7/16", L = 14")ABC421 $22.50 (2 Gauge, EO = 3/8", L = 19")ABC403 $25.85 (2 Gauge, EO = 7/16", L = 24")

Insulated Battery Cables

ABC407 $16.99 (2 Gauge, EO = 3/8", L = 10-1/2")ABC415 $15.40 (2 Gauge, EO = 3/8", L = 12")ABC413 $19.15 (2 Gauge, EO = 3/8", L = 14-1/2",

90º terminal ends)ABC1582 $12.15 (2 Gauge, EO = 3/8", EYELET BOTH

ENDS, L = 16-1/4")ABC417 $18.50 (2 Gauge, EO = 3/8", L = 21")ABC419 $19.95 (2 Gauge, EO = 3/8", L = 27")

Battery boxes, parts - USA madeOrder # Price Description / Application

ACS063 $82.50

Battery Box w/ Lid Fits: G, Replaces: 70800626(Inside dimensions: 7-3/16" wide x 8-3/4" tall x 9-3/4" long) NOTE: Persian orange #1 powder coat.

ACS1260 $36.95

Battery Box Bracket Set (2-Piece) Fits: G, Replaces: 70800105 (upper), 70800109 (lower)

ACS029 $77.85Battery Box w/ Lid Fits: B, C, CAReplaces: 70226026(Inside dimensions: 7-3/16" wide x 8-3/4" tall x 9-3/4" long)NOTE: Persian orange #1 powder coat.

ACS072 $85.75 Battery Box w/ lid Fits: RC, WC, WF Replaces: 70224539(Inside dimensions: 7-5/8" wide x 8-3/4" tall x 9-1/8" long)NOTE: Mounts on side of frame.

ACS030 $77.85 Battery Box w/ Lid Fits: WD, WD45 gasReplaces: 70224540(Inside dimensions: 7-3/16" wide x 8-3/4" tall x 9-3/4" long) NOTE: Persian orange #1 powder coat. Dash not included; must re-use old dash.

Battery boxes, parts continue on next page

Electrical parts

























Alli

sCh

alm

ers Battery boxes, parts - USA made cont...


ACS193 $104.95Battery Box w/ Lid Fits: WD45 dieselReplaces: 70226951(Inside dimensions: 9" wide x 8-3/4" tall x 14-1/16" long)

ACS195 $89.95Battery Box w/ Lid Fits: D10, D12Replaces: 70233332(Inside dimensions: 7-3/16" wide x 8-3/4" tall x 9-3/4" long)

ACS1509 $24.75 Battery Box Side Cover Fits: B, C, CA, D10, D12, D14, D14 AUX, W226, WD, WD45, Replaces: 70222525NOTE: Powder coated in Persian Orange #1.

ACS063L $29.95 Battery Box Lid only Fits: G, B, C, CA, D10, D12, WD, WD45 gas, Replaces: 70210907NOTE: Powder coated in Persian Orange #1.

FDS369 $23.75 Battery Hold Down Fits: D17 gas up to SN: 24000 using Group 1 battery, Replaces: 70229487(9-3/16" long x 7-1/16"wide; Mounting holes c.c. = 10-1/8") NOTE: 16 gauge steel. New & improved quality!

IHS721 $8.95 Battery Retainer J-Bolt (Pair) Fits: Allis Chalmers models(5/16"-18" UNC x 10-3/4")

Fuse holderFits: D10, D12, D14, D15, D17, D19, D21, 180, 185, 190, 190XT, 200, 210, 220 Replaces: 70230246 USA made


Fuse Holder .............................................................ABC389 ............. $10.95NOTE: Rated at 20 AMP; Fits in 1/2" hole.

Wiring harness kits - USA madeNOTE: Wiring harness kits include light

wires and diagram. Original style braiding

w/ soldered terminals. Restoration quality.

Other harnesses also available by special

order. Call or email for a quote.


ACS329 $128.50 (For 6-volt generator systems only) Fits: G w/ cut-out, Replaces: 70800136

Wiring harness kits - USA made cont...Order # Price Description / Application

ACS335 $168.50 (For 6-volt generator systems only) Fits: B, IB SN: 55301 & up, C, CA w/ cut-out, Replaces: 70225591

ACS2923 $174.95 NEW! (For 1 wire 12-volt alternator)Fits: B, IB, C, CA

ACS352 $168.50 (For 6-volt generator systems only) Fits: RC, WC, WF w/ cut-outReplaces: 70208322

ACS331 $168.50 (For 6-volt generator systems only) Fits: WD, WD45 gas w/ cut-outReplaces: 70222532

ACS2925 $174.95 NEW! (For 1 wire 12-volt alternator)Fits: WD, WD45 gas, LP

ACS2260 $218.50 (For 6 & 12-volt generator systems) Fits: D14, D15 series I (up to SN: 13000) gas, Replaces: 70228375, 70230083

ACS2867 $231.50 NEW! (For generator system)Fits: D15 series II SN: 13001 & up gasReplaces: 70237839, 70237840

ACS2873 $238.50 NEW! (For generator systems)Fits: D17 series IV SN: 75001 - up gasReplaces: 70237724, 70242869, 70242870

Cigarette lightersNOTE: Anodized aluminum knob engraved w/ the word

"LIGHTER".


ABC1862 $29.956-volt Cigarette Lighter w/ Socket Fits: Early D14 up to SN: 19000 w/ 6-volt system, Replaces: 70230228

IHS949 $29.95 12-volt Cigarette Lighter w/ Socket Fits: D14 SN: 19001 & up, D17Replaces: 70232810NOTE: Original style.

Ignition partsOrder # Price Description / Application

ABC498 $14.95 Terminal Insulator Assembly(Round style) (For Delco distributor) Fits: G, Replaces: 1847646, 1847647, 1878405 NOTE: Fits distributor housings w/ .345" dia. round hole.

ABC500 $14.95 Terminal Insulator Assembly(Square style) (For Delco distributor) Fits: B, IB, C, CA, D10, D12, D14, D15, D17, D19, RC, WC, WF, WD, WD45 Replaces: 70225791, 70225792, 70225793, 70225794, 70225795NOTE: Fits distributor housingsw/ .300" dia. hole w/ keyway.

Elec

tric

al p

arts




http://www.steinertractor.com/ACS063L

















Allis

Chalmers

Ignition parts cont...Order # Price Description / Application

Coils / Resistor

ABC011(6-volt)

$19.95 Distributor Coil (Metal Housing) & Mounting Bracket Fits: Allis Chalmers modelsABC011 Replaces: Delco 1115379, D502, 70247333ABC509 Replaces: Delco 1115380, U505, 74514967 NOTE: ABC509 is internally resisted. See website for full applications.

ABC509(12-volt)

$19.95

ABC348 $57.10 HOT" Coil (55000-Volts) Fits: 12-volt systemsNOTE: Maximum voltage for faster starting, reduced plug fouling & longer plug life. Must use w/ ABC366 resistor.

ABC366 $7.75 Universal 12-volt Voltage Resistor (2-Terminal Style) Fits: Allis Chalmers modelsReplaces: 70241266 NOTE: Used to step down 12-volt battery. Limits voltage to coil when using 12-volt battery. 1.5 OHMs on 6-volt battery to 4.0 OHMs for 12-volt battery. Resistor gets very hot.

Dust Covers

ABC186 $9.80 Dust Cover w/ Felt, Gasket & Washer (For Delco-Remy w/ clip held cap)Fits: B, IB, C, CA, D10, D12, D14, D15, D17, D19, G, RC, WC, WD, WD45, WF Replaces: 70225734, Delco 1900119

ABC2428 $14.85 Dust Cover (For Delco screw held cap)Fits: 170, 175, 180, 185, 190XTReplaces: 74056699(3.300" O.D., 1.047" tall, (2) 0.210" screw holes) NOTE: Fits ABC141, ABC420 caps.Distributor Caps, parts

ABC276 $9.50 Distributor Cap (For EARLY Delco Distributor w/ clip held cap thru 1963) Fits: B, IB, C, CA, D10, D12, D14, D15, D17, G, H3, RC, WC, WD, WD45, WFReplaces: 70225733, Delco 811735

ABC330 $11.35 Distributor Cap (6-cyl)(For EARLY Delco Distributor w/ clip held cap) fits: D19, & 6-cylinder Combines using Delco 824735Replaces: 74042704

ABC141 $10.95

Distributor Cap (For LATE Delco Distributor w/ screw held cap)Fits: 170, 175, Replaces: 74058876


Distributor Caps, parts cont...

ABC420 $9.45

Distributor Cap(For Delco Distributor w/ screw held cap) fits: 180, 185, 190Replaces: 74056696, Delco 1960810

ABC556 $2.50Distributor Mounting Gasket Fits: B, IB, C, CA, RC, WC, WD, WFReplaces: 70233212USA made

ABC488L(31/32" Bracket)

$14.95

Bracket Distributor Cap Spring Clip(For Delco distributor and clip held cap) Fits: B, IB, C, CA, D10, D12, D14, D15, D17, D19, G, RC, WC, WD, WD45, WFReplaces: 70225774, 70225775 (bracket)(2-1/4" o/a length)

ABC488S(11/16" Bracket)

$14.95

ABC3007 $22.95 NEW! Delco Distributor Shaft Bushing & Shim Kit fits: B, IB, C, CA, D10, D12, D14, D15, D17, D19, G, RC, WC, WD, WD45, WF, Replaces: 70225773, 70225797, 70250977, 74050123 (0.486" I.D., 0.656" O.D., 2.867" length) USA made

Distributor Clamp

ABC2523 $6.95Distributor Hold Down Clamp(For 3/8" hold down bolt) Fits: B thru 175 (All w/ distributor)Replaces: 70225344 NOTE: 2 used per engine; Sold individually. See website for additional applications.

Distributor Tags

ABC511(6-volt)

$14.45

Distributor Tag w/ (2) Rivets(For Delco Remy Distributor) Fits: Tractors & Industrial(2.5" long, .800" wide, .150" dia. rivet hole, 2" c.c. rivet holes) USA madeNOTE: Stamped w/ raised letters. Customer must stamp numbers.

ABC514(12-volt)

$14.45

Ignition parts continue on next page

Electircal parts












http://www.steinertractor.com/ABC488L

http://www.steinertractor.com/ABC488S





Alli

sCh

alm

ers Ignition parts cont...


Spark Plug Wiring Sets, part

ACS287 $18.95 Spark Plug Wiring Set w/ Straight Boots (Preassembled) fits: B, IB, C, CA, D10, D12, D14, D15, D17, RC, WC, WD, WD45, 170, 175, I-40, I-400, I-60, I-600 (All w/ Distributor), Replaces: 70225613, 70229867 USA made NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene.

FDS149 $12.50 Spark Plug Wiring Set w/ 90º Boots Fits: G thru 175 4-cyl. models USA madeNOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length.

ACS228 $15.95 Spark Plug Wiring Set w/ Straight Boots Fits: 4-cyl. models USA madeNOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length.

ABC326 $19.85 Spark Plug Wiring Set w/ 90º Boots Fits: 6-cyl. modelsReplaces: 74512808 USA madeNOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length.

ABC2863 $19.85 NEW! Spark Plug Wiring Set w/ Straight Boots fits: 6-cyl. models USA madeNOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length.

ACS1548 $34.90 Tailored Spark Plug Wiring Set Fits: B, IB, C, RC (All w/ Magneto)Replaces: 70213505(4 wires measure 7", 9-3/4", 11-1/2", 12-1/2) USA madeNOTE: Original type preassembled, cotton braid w/ copper wire.

ACS1552 $35.95 Tailored Spark Plug Wiring Set Fits: B, C, CA (All w/ Distributor)Replaces: 70225613(5 wires measure 7-1/4", 9-3/4", 12-1/4", 16-3/4", 13" coil wire)USA made NOTE: Original type preassembled, cotton braid w/ copper wire.

ACS309 $29.95 Wire Loom Holder Fits: G, Replaces: 70800260 (bracket), 70800261 (grommet)USA made

ABC1897 $1.45Spark Plug Wire Grommet Fits: GReplaces: 70800261


Spark Plugs (Autolite)

ABC168 $4.25 Fits: B, IB, C, CA, D10, D12, D14, Early D15, (D17 up to SN: 75000), G, H3, RC, WC, WD, WF

ABC168 specifications: 14 mm thread, 3/8" reach, 13/16" hex, Autolite 295, Plug Gap .030

ABC169 $7.20 Fits: K, L, M, UABC169 specifications: 7/8" x 18 mm thread, 5/8" reach, 15/16" hex, Autolite 3076, Plug Gap .030

ABC323 $3.80 Fits: D17 SN: 75001 & up, H4, 170, 180, 190, 190XT

ABC323 specifications: 14 mm thread, 3/4" reach, 13/16" hex, Autolite 405, Plug Gap .025

ABC183 $4.25 Fits: UC w/ 14 mm threadsABC183 specifications: 14 mm thread, 3/8" reach, 13/16" hex, Autolite 306, Plug Gap .025

ABC171 $5.20 Fits: Some Industrial applicationsABC171 specifications: 18 mm thread, 1/2" reach, 7/8" hex, Autolite 388, Hot hear range, Std Tip / Resistor, Plug Gap . 030

Ignition Tune-Up Kits

ACS110 $25.95(For Delco Distributor) Fits: B, IB, C, CA, D10, D12, D14, (Early D15, Early D17 w/ 3/8" reach), G, H3, RC, WC, WD, WF (4-cyl. gas)Replaces: 70243507, 70225736, 9001652NOTE: Kit contains: Spark plugs, heavy duty points, condenser & rotor. Spark Plug Gap .030, Point Gap .020.

ABC018 $10.75

(For Delco Distributors w/ clip held cap thru 1963) fits: All 4-cyl. models; D19 6-cyl. wheel tractor; Combines: A, B, C, E Replaces: 70243507, 70225736NOTE: Kit contains: Points, condenser & rotor. Point Gap .020.

ABC333 $9.10Ignition Tune-Up Kit (For Delco-Remy Systems w/ screw held cap) Fits: 170, 175, 180, 185, 190, 190XTReplaces: 79001128, 79001168USA made NOTE: Kit contains: Heavy duty point set, vibration resistant condensor & rotor; Point Gap .025

Rotor Button

ABC520 $3.95

(For Delco-Remy Distributor w/ clip held cap) Fits: B, IB, C, CA, D10, D12, D14, D15, D17, D19, G, RC, WC, WD, WD45, WF, Replaces: 70225736, 1921285

Elec

tric

al p

arts



















Allis

Chalmers

Fairbanks Morse (FM series) magneto partsNOTE: For magnetos w/ 2-piece cap.


FM04 $26.60 Point Set fits: FM-J, FM-J4-B3, FM-JE, JM-JG, FM-T,w/ clockwise rotation & 2 piece cap NOTE: Point Gap .020; See our website for a full application listing.

FM01 $9.25 Condensor fits: FM-J2B6D, FM-JIA, FM-JIB, FM-J4B3, FM-2A, FM-2B, FM-4A, FM-K, FM-X series (All w/ 2 piece cap)

FM02 $79.95 End Cap fits: FM-J4, FM-J4B3, FM-OX4, FM-X4B3, FM-B1 (All w/ 2 piece cap)USA made

FM03 $16.75 Rotor fits: FM-J4, FM-J4B3, FM-JV4, FM4B, FM-X4B3, FM-ZV4 (All w/ 2-piece cap)NOTE: Clockwise rotation.

FM05 $85.10 Coil fits: Most multi cylinder FM series, FMJ2B6D (All w/ 2-piece cap) USA made

ABC556 $2.50 Mounting Gasket fits: Multi cylinder FM series magnetos, Replaces: 70233212USA made

ABC1185 $10.65 Magneto Gasket Set fits: Multi cylinder FM series magnetos (All w/ 2-piece cap)USA made

WICO magneto, parts - USA madeOrder # Price Description / Application

XH894 $414.50

Complete Magneto Fits: B, IB, C, RC, WC, WD, WF, othersReplaces: Fairbanks FM series

MAG6 $14.50

Instructions & Parts List (1959) WICO XH, XHD Magneto Service

The following parts (Sold separately) will fit XH894, XH3001,

XB2065 WICO Magneto:

Order # Price Description

FXH2100B $22.45 PointsFXH2024 $15.25 CondensorFXH2403 $57.50 CoilFXG2002A-2 $60.15 CapFXG1008 $33.95 RotorABC556 $2.50 Mounting GasketXHGK $4.05 Gasket (For cap)

Starters, partsOrder # Price Description / Application

Starter Solenoid Relay Assemblies, parts

ABC138 $29.9512-volt Solenoid Switch (3 Post Saddle Mount) fits: D10, D12, D14, D15 gas, D21, I-40, I-400, I-60, I-600, 170Replaces: 70237136NOTE: 12-volt systems only.

ABC1366 $34.9512-volt Starter Solenoid (4 Terminal) (For 30, 35 MT series Delco starters) Fits: D17 w/ starter 1113082, 180 thru 7020 (All diesel), Replaces: 70243828, 79017977

ABC1179 $20.75 12-volt Starter Solenoid (3 Terminal) (For Delco Starters) fits: 160 w/starter 1107860, 170, 175 (All diesel); 180, 185, 190 w/ starter 1107356 (All gas); Combines: E3 thru M2 gas, Replaces: 70243857

ABC508 $5.35 Starter or Solenoid Terminal Repair Stud (For tractors using 5/16" x 18 NC starter terminals)NOTE: Brass.

ABC506 $5.30 Starter or Solenoid Terminal Repair Stud (For tractors using 5/16" x 24 NF starter terminals)NOTE: Brass.

Starter Rod, Foot / Lever Switch & Levers

ACS342 $24.95Starter Rod Fits: G, Replaces: 70800110(21-3/4" o/a length)USA made

ABC012 $11.95Starter Switch (Saddle Mount) Fits: B, IB, C, CA, G, RC, WC, WD, WD45 gas, WF, Manual foot switchReplaces: 70226128NOTE: Will not fit Autolite starters.

Starters, parts continue on next page

Electircal parts

FM04 FM01 FM02 FM03

FM05 ABC556 ABC1185

FXG1008 ABC556 XHGK

FXH2100B FXH2024 FXH2403 FXG2002A-2


http://www.steinertractor.com/FM04







http://www.steinertractor.com/XH894

http://www.steinertractor.com/MAG6

http://www.steinertractor.com/FXH2100B

http://www.steinertractor.com/FXH2024

http://www.steinertractor.com/FXH2403

http://www.steinertractor.com/FXG2002A-2

http://www.steinertractor.com/FXG1008


http://www.steinertractor.com/XHGK









Alli

sCh

alm

ers Starters, parts cont...


Starter Rod, Foot / Lever Switch & Levers cont...

ACS275 $7.95 Lever (For Push Rod-Type Starter Switch) Fits: B up to SN: 113778, IB up to SN: 1878, C, RC, (WC SN: 74330 & up), (WF SN: 1904 & up), Replaces: 70210172USA made

ACS277 $7.95 Lever (For Pull Rod-Type Starter Switch) Fits: B SN: 113779 & up, IB SN: 1879 & up, CA, G, WD, WD45Replaces: 70225587USA made

ABC066 $16.40 Manual Starter Switch (Base Mount)(For 7/8" hole) Fits: A, IU, K, M, U, UCReplaces: U879, 23459(Dash mount for 1-3/4" mounting hole)NOTE: Will work on 6 or 12 volt.

Starter Drive Housings, parts

ACS324 $69.45 Starter Drive Housing fits: B, IB, C, CA, Early D10, D12 w/ starter 1107471, D14 gas w/ starter 1107466, RC, WC, WD, WD45, WF (All w/ starter 1107006, 1107017, 1107024, 1107043, 1107044, 1107045, 1107046, 1107096, 1107951)Replaces: 1879156NOTE: No returns if broken.

ABC1203 $17.95 Starter Commutator (Brush) Band Cover (For 4-1/2" O.D. Delco Starter Housing) Fits: B, IB, C, CA, (D10 up to SN: 3501), D12 up to SN: 3001, (D14 6-volt only), D15 diesel, RC, WC, WD, WD45 gas, WFReplaces: 7412626(1-3/16" wide) USA madeNOTE: Stainless steel.

ABC1939 $17.95 Starter Commutator (Brush) Band Cover (For 3-3/4" O.D. Delco starter housing) Fits: G w/ Delco Starter # 1109605, 1109614Replaces: 1887889 USA madeNOTE: Stainless steel.

ACS1269 $53.85 Starter Drive Housing fits: D14 SN: 19001 & up, D15, H3 gas, LP, (All w/ factory 12-volt starter 1107558 or 1109388) Replaces: 70233294, Delco 1948113(2.575" to center of mounting bolt locating hole, 3.775" to 1st edge of starter drive gear opening) NOTE: Dimensions are from end of nose cone where it bolts to starter. No returns if broken.

ACS1275 $52.35 Starter Drive Housing fits: D17, 170, 175 (All w/ starter 1107695, 1109384); Combines: E, E3, K; Industrials: 616, 622, 801, 802 (All w/ starter 1107695, 1109384)Replaces: 70231356, Delco 1940960, 1974808 NOTE: 2 bolt. No returns if broken.

Starters, parts cont...Order # Price Description / Application

Starter Drive Housings, parts cont...

ABC505 $62.50 Original Spring Style Starter Drive (Bendix) fits: B, IB, C, CA, Delco starters 1107043, 1107046, 1107096; Autolite starter MAW4031, Replaces: 1880651, 9004839NOTE: 14 teeth.

ABC458 $39.50 Original Spring Style Starter Drive (Bendix) Fits: G w/ starter 1109605, 1109614; Early D10, D12, D14, WC, WD, WD45 w/ 6-volt system & starter 1107951, 1107017, 1107466, 1107474, 1107962, Replaces: 9004862NOTE: 10 teeth.

ABC507 $23.95

Starter Drive Spring only(For ABC458)

IHS132 $44.95 Improved Positive Ratchet Style Drive (Bendix) fits: Early D10, D12, D14, WC, WD, WD45, w/ 6-volt system & starter 1107951, 1107017, 1107466, 1107474, 1107962 Replaces: 9004862NOTE: 10 teeth.

ABC517 $14.45 Starter Tag w/ 2 Rivets Fits: Tractors & Industrial using Autolite starters (2.955" o/a length, .915" wide, .140" dia. rivet holes, 2.650" c.c. rivet holes)USA made NOTE: Anodized aluminum. Customer must stamp numbers.

ABC511(Black 6-volt)

$14.45

Starter Tag w/ 2 Rivets Fits: Tractors & Industrial using Delco Remy starters (2.5" long, .800" wide, .150" dia. rivet hole, 2" c.c. rivet holes)USA made NOTE: Stamped w/ raised letters. Customer must stamp numbers.

ABC514(Red12-volt)

$14.45

Push / Pull Switches

ABC233 $12.50 Starter Push Switch, Extra heavy duty momentary push button switch Fits: D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, (7000 SN: 4095 & up), 7010, 7020, 7030, (7040 except w/ power director / shift), 7045, 7050, (7060 except PD & PS tractors), 7080, 7580, 8010 - 8070, 8550, (Also used as Ether switch on AC 7000, 7030, 7040, 7050), Replaces: 70253322(Mounting stem 5/8" - 32 thread, 21/32" long) NOTE: Depress button: ON; Spring return: OFF. Two screw type terminal. Up to 35 V (DC), rubber cap for dust and moisture protection.

Elec

tric

al p

arts


















Allis

Chalmers


Push / Pull Switches cont...

ABC398 $8.20 Universal 2-Position Push / Pull Starter Switch fits: Ag & Light Industrial equipment (10-24 knob thread)NOTE: 30 AMP, 3/8" dia. thread, two screw type terminals, non-fused. This can be used on battery ignition systems only.

JDS631 $12.95 Universal 3-Position Fused Push / Pull Starter & Light Switch fits: Ag & Light Industrial equipment w/ voltage regulator NOTE: 15 AMP, five terminals, fused, 7/16-20 stem. 10-24 N.C. black plastic knob.

ABC489 $14.50 Magneto Push / Pull Ignition Switch (O.E.M.) fits: Allis Chalmers models w/ Magneto Ignition, Replaces: 70213140NOTE: One screw type terminal; Out: ON; In: OFF.

Ignition / Key Switches, parts

ABC065 $12.95Ignition / Key Switch w/ 2 Keys Fits: B, C, CA, D14, WD, WD45Replaces: 70225310NOTE: 2 wire switch; May have to drill hole to 0.800" on some applications.

IHS760 $19.95 NEW! Ignition / Key Switch w/ 2 Keys & Mounting Nut fits: B, C, CA, D14, WD, WD45, Replaces: 225310 USA madeNOTE: 2 spade terminal switch; May have to drill hole to 0.800" on some applications.

ACS288 $34.95 Ignition / Key Switch w/ 2 Keys Fits: D10 up to SN: 3500, D12 up to SN: 3000, D14 SN: 9500 & up, D15 up to SN: 9000, D17 up to SN: 75000, D19, D21 (All using Delco switch), Replaces: 70235785(.995" dia. threaded end) NOTE: Five spade terminals. Will fit D10 & D12 w/ newer serial numbers but must use 70227195 washer so switch will fit dash, NOT available from STP, Inc.

KEY01 $4.50Ignition Key (For ACS288 Ignition Switch) Fits: (D10, D12 both to SN: 9000), D14 SN: 9500 & up, D15 up to SN: 9000, D17 up to SN: 75000, D19, D21 (All using Delco switch), Replaces: 70231713, 72162639

ACS292 $19.25 Ignition / Key Switch (O.E.M.) Fits: Late (D10, D12 Both SN: 9001 & UP) D15 gas, diesel using Indak switch SN: 9001 & up, D17 SN: 75001 & up, 170, 175, 180, 185, 190, 190XT, 200, 210, 220 Replaces: 70241965 USA madeNOTE: Five spade terminals.


Ignition / Key Switches, parts cont...

ACS354 $16.95Switch Plate Fits: 170, 175, 180, 185, 200, 190, 190XT, 210, 220 (All diesel), Replaces: 70242398USA made

KEY1094 $2.05 Ignition Key (For ACS292) Fits: (D10, D12 SN: 9001 & up), D17 SN: 75001 & up, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6040, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550, Replaces: 70241977USA made

ABC400 $14.85Ignition / Key Switch w/ 2 Keys Fits: Ag & Light Industrial equipment(3/4" dia. thread)NOTE: Four stud type terminals.

Generator partsOrder # Price Description / Application

ABC015 $24.95 6-volt Generator Cut-Out Assembly Fits: B, IB, C, CA, RC, WC, WD, WD45, WF using original 6-volt 1101357, 1101413 generator, Replaces: 1867781, Autolite C4012 on models using 6-volt GGR4801 generator NOTE: 15 Amp. Mounting tabs are parallel w/ cut-out.

ACS1976 $24.95

Upper Generator Adjusting Bracket Fits: B, C, CA, IB (SN: 55301 & up)Replaces: 70210989

ACS1913 $22.50 Lower Generator Bracket fits: B, C, CA, (D10 up to SN: 3500), (D12 up to SN: 3000), D14, (W226 Power Unit SN: 96714 & up Replaces: 70210990 (6.080" o/a length, 1" wide,0.250" thick, 2 holes = 0.375" O.D., 2 holes = 0.340" O.D) USA made

ABC103 $10.50Generator Belt Fits: M, Late U, UCReplaces: U424(1/2" wide x 24-1/4" long)

ABC1207 $17.95 Generator Commutator (Brush) Band Cover (For 4-1/2" O.D. Delco Generator Housing) fits: B, IB, C, CA, RC, WC, WD, WD45, WF, Replaces: 1872638(1-5/8" wide) USA madeNOTE: Stainless steel.

Generator parts continue on next page

Electircal parts








http://www.steinertractor.com/KEY01



http://www.steinertractor.com/KEY1094







Alli

sCh

alm

ers Generator parts cont...


ABC519 $14.45 Generator Tag w/ 2 Rivets Fits: Tractors & Industrial using Autolite generator (2.300" o/a length, .732" wide, .145" dia. rivet hole, 2" c.c. rivet holes)USA made NOTE: Anodized aluminum. Customer must stamp numbers.

ABC511 (6-volt)

$14.45

Generator Tag w/ 2 Rivets Fits: Tractors & Industrial using Delco Remy generator(2.5" long, .800" wide, .150" dia. rivet hole, 2" c.c. rivet holes)USA made NOTE: Stamped w/ raised letters. Customer must stamp numbers.

ABC514(12-volt)

$14.45

Voltage regulatorsOrder # Price Description / Application

ABC153 $32.95 6-volt (4 Terminal) Voltage Regulator (Saddle Mount) fits: B, IB, C, CA, WC, WD, WD45 gas, WF using Delco 1101357, 1101413 or 1101414 generators when used w/ ABC188 Voltage Resistor KitReplaces: 74514722 NOTE: Provides 2-unit positive ground generator mounted regulator.

ABC188 $45.55 Voltage Regulator Conversion Kit Fits: B, IB, C, CA, WC, WD, WD45, WFNOTE: Used w/ ABC153 Voltage Regulator when replacing Delco-Remy cut-outs 1116766, 1116807, 1116809 or 1116816 & updating your generator system.

ABC152 $32.95 6-volt (4-Terminal) Voltage Regulator (Base Mount)Fits: D10 up to SN: 3501, D12 up to SN: 3001, D14 up to SN: 19001 using Delco 1100025 generator, Replaces: 70228365, Delco 1119575

ABC185 $32.95 12-volt (4-Terminal) Voltage Regulator (Base Mount)Fits: D10, D12 SN: 3501 & up, D14 SN: 19001 & up, D15 gas, D17 gas, diesel, D19 gas, diesel, Replaces: 70229484, 70236680NOTE: For 12-volt generator system.

ABC1148 $28.9512-volt (4-Terminal) Voltage Regulator (Base Mount) Fits: D21, 170, 175, 180, 190, 190XT gas, diesel; 210, 220 diesels; 160, 185, 200 (All w/ factory alternators)Replaces: 72072955

Alternators, partsNEW not rebuilt • To convert 6-volt to 12-volt system.

For negative ground systems.


ABC535 $149.95 MINI 41 AMP Maximum Alternator w/ Pulley & Diode Fits: Allis Chalmers models requiring a smaller dia. alternator for clearance (4-1/2" housing dia., 2-1/2" pulley dia., 3/8" belt width) NOTE: For 12-volt negative ground systems only. This alternator has a built in 3 wire regulator, that requires an excitation circuit. Includes instructions.

ABC2315 $34.95

Alternator Pulley (For ABC535)(0.587" ID, 1.437" o/a length, 3" pulley O.D., 5/8" belt width)USA made

ABC418 $99.95 63 AMP Alternator w/ Pulley Fits: Allis Chalmers models(6-1/4" housing dia., 2-1/2" pulley dia., 5/8" belt width) NOTE: For 12-volt negative ground systems only. Must rev engine to 800 - 850 RPM in order to self excite. Simple 1-wire alternator Hook Up: Run a wire from alternator through amp gauge to positive side of battery!

ABC1426 $19.95

Pulley only (For ABC418)(.670" shaft dia., 3-3/16" pulley O.D., 1/2" belt width)

ABC495 $19.95

Pulley only (For ABC418)(.670" shaft dia., 2-1/2" pulley O.D., 5/8" belt width)

ACS2347 $49.95 Alternator Bracket KitFits: B; (Serviceable for C, CA, but must trim 1" off lower end of adjustment bracket & redrill hole to clear draglink); IB, (lower bracket only fits D10, D12, D14) USA made NOTE: Use w/ ABC418 alternator & w/ existing belt.

ACS2352 $59.10Alternator Bracket KitFits: WC, WD, WD45, WF gas, LPUSA madeNOTE: Use w/ ABC418 alternator.

Elec

tric

al p

arts















Allis

Chalmers

Alternators, parts cont...Order # Price Description / Application

ABC404 $34.95 Universal Mounting Kit Fits: Allis Chalmers modelsNOTE: Does not include the top adjusting bracket. Used when switching from a generator to an alternator. May have to be drilled or modified for your application.

ABC529 $23.50 Universal Top Adjusting Bracket Fits: Allis Chalmers models(7/8" wide, 1-1/2" offset, 8-1/4" from farthest end of slot to center of mounting hole, 3-3/4" slot length, 3/8" mounting hole) NOTE: Customer may need to trim to fit some models.

Light switches, partsOrder # Price Description / Application

IHS950 $14.50Field Resistor on Light Switch Fits the following using the original switch (208197) and cut-out system: B, IB, C, CA, G, RC, WC, WF, WD, WD45 gas up to SN: 201241

ACS139 $39.95 3-Position Light Switch, (Hi-Lo-Charge) (Hi charge w/ lights) Fits: B, C, CA, G, RC, WC, WD, WD45, WF (All w/ cut-out on generator)Replaces: 70208197(10-32 thread) NOTE: Three screw type terminals, .800" dia. threaded stem.

ABC425 $4.95Knob only (Says "LIGHTS") (For ACS139 Switch)(10-32 thread)

ABC367 $4.95Knob only (Plain Face) (For ACS139 Switch)(10-32 thread)

ACS290 $28.50

2-Position Light Switch (O.E.M.) Fits: D10, D12, D14, D15, D17, D19, D21, 190, 190XT, Replaces: 70234409NOTE: Two spade terminals.

ACS1096 $32.50Light Switch w/ Knob (O.E.M.) Fits: 160, 170, 175, 180, 185, 190, (190XT SN: 19001 & up), 200, 210, 220, 6040Replaces: 70249142USA made

Light switches, parts cont...Order # Price Description / Application

ACS1098 $15.95Light Switch Plate Fits: 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6040, Replaces: 70249141USA made

ABC398 $8.20 Universal 2-Position Push / Pull Light Switch fits: Ag & Light Industrial equipment (10-24 knob thread)NOTE: 30 AMP, 3/8" dia. thread, Two screw type terminals, non-fused.

JDS631 $12.95 Universal 3-Position Fused Push / Pull Starter & Light Switch Fits: Allis Chalmers models w/ voltage regulator NOTE: 15 AMP, five terminals, fused, 7/16-20 stem. 10-24 N.C. black plastic knob.

Headlights, partsNeed light components? See pg. 35


ACS165 $84.95

6-volt Complete Headlight Assembly Fits: GReplaces: 70800128

ACS333 $27.50Headlight Bracket Fits: GReplaces: 70800117

ACS152(6-volt)

$49.50

Complete Headlight Assembly Fits: B, IB, C, CA, (Late U, UC, UI using 4-3/4" dia. lights)Replaces: 70210921, 70210922(1/2" dia. stud)

ACS205(12-volt)

$49.50

ACS150 $49.50

6-volt Complete Headlight Assembly Fits: RC, WC, WF, WD, WD45 Replaces: 70236969

Headlights, parts continue on next page

Electircal parts



















Alli

sCh

alm

ers Headlights, parts cont...

Need light components? See pg. 35


FDS193 $49.95

12-volt Complete Sealed Beam Headlight Assembly Serviceable for D15 up to SN: 9001, D17 up to SN: 42001, H3, HD3 Replaces: 70229915(5-3/4") NOTE: Mounts to side of grille & not to fender. Serviceable = not exact of original.

ABC525 $45.95

NEW! 12-volt Sealed Beam Headlight Assembly fits: D21Replaces: 70239803(4-1/2", 1-1/8" stud length)

JDS581(Lo Beam)

$44.95

Sealed-Beam Headlight Assembly(For Flat Top Fenders) Fits: 170, 175, 180, 185, 190, 190XT, 200, 210, 220JDS581 Replaces: 70249146JDS582 Replaces: 70249147(4-1/2")

JDS582(Hi Beam)

$44.95

JDS676 $18.15Clamp Ring w/ Screw(For Sealed Beam Lights) Fits: Late 190XT, (D14 SN: 19001 & up), D15, D21, 160, 170, 175, 180, 185, 190, 200, 210, 220, 6040, 7030, 7050Replaces: 70230233(4-1/2")

IHS647 $34.95 12-volt Sealed Beam Headlight Assembly (For Flat Top Fenders) Fits: 190XT, 170, 175, 180, 185, 190, 200, but not like original; 6040, 6060, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, Replaces: 70267185(4-1/2") NOTE: Post is out of backw/ wires thru post.

MFS108 $18.95

Light Visor Fits: D10, D12, D15 (All SN: 9001 & up); D17 SN: 42001 & up, D19Replaces: 70236352

Dash light, partsFits: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, I-40, I-400, I-60, I-600 ACS273 Replaces: 70234404(.658" dia., 1" c.c. mounting holes) JDS589CH Replaces: 70234357(1-1/4" dia)


12-volt Chrome Dash Light Assy .......................ACS273 .............. $29.95

12-volt Bulb ............................................................ABC345 ............. $1.80

Chrome Dash Light Cover only ......................... JDS589CH ........ $15.45

Tail lights, partsNeed light components? See pg. 35


ACS264V6(6-volt)

$42.50

Bullet Style Tail Light Assembly Fits: G, B, C, CA, (D10, D12 both up to SN: 9001), (D14 up to SN: 19000), WD, WD45, Replaces: 70228377

ACS264V12(12-volt)

$42.50

JDS603(6-volt)

$49.95

Tail Light Assembly w/ Copper Ground Strap fits: RC, WC SN: 74330 & up, WF SN: 1904 & upReplaces: 70237100(4-3/4" Curved lens; 1-1/2" stud length)

JDS606(12-volt)

$49.95

ACS355 $96.9512-volt Sealed Beam Combo Tail Light Fits: D10, D12, D15 SN: 9001 & up, D17 SN: 42001 & up, D19, D21, 190 up to SN: 19000 & 190XT up to SN: 19000Replaces: 70240895(4-3/4")

ABC3154 $34.95 NEW! 'Hobbs' Rear Combo Light Fits: Tractors & equipment using rear 12-volt combo light w/ stud post out back & dash mounted light switch USA made NOTE: New old stock, paint is blemished.

Elec

tric

al p

arts

ABC345 JDS589CH

ACS273






http://www.steinertractor.com/MFS108



http://www.steinertractor.com/JDS589CH

http://www.steinertractor.com/ACS264V6

http://www.steinertractor.com/ACS264V12






Allis

Chalmers

Tail lights, parts cont...Order # Price Description / Application

IHS899 $19.9512-volt Sealed Beam Combination Rear Light Bulb w/ transparent red background using separate bulbFits: ACS355 & ABC3154 combo tail lights, Replaces: 70250301, 4409(4-1/2")

ABC345 $1.8012-volt BulbNOTE: Installs behind IHS899.

ABC544 $17.15

12-volt Fender & Cab Warning Light Serviceable for D21 thru 7080 (All using round warning light)Replaces: 70248110(4" dia.) NOTE: 2 amber lenses, double contact bulb & black die cast base

ABC1439 $3.45

6-volt Bulb only (For ABC544)

ABC546 $26.5012-volt Fender & Cab Warning Light Serviceable for Allis Chalmers models (All using rectangular warning light)NOTE: 1 amber lens, 1 red lens, amber side marker, single contact bulb & black ABS base.

ABC1243 $4.95

Amber Lens only(For ABC546)

ABC548 $9.95 12-volt Round Tail Light Assembly w/ License Lamp Window Fits: Allis Chalmers models(4" dia.; 2 stud mount, 1-7/8" c.c. studs)NOTE: Red lens, black ABS base.

ABC1439 $3.45

6-volt Bulb only (For ABC548)

ACS220(Lens)

$20.75 Tail Light Lens w/ Guide Name or Gasket fits: D14 SN: 19001 & up, D15 to SN: 9001, D17 gas up to SN: 42001 & diesel up to SN: 38964ACS220 Replaces: 70229795(2-9/16" O.D.) USA madeNOTE: Red plastic.

ACS245 Replaces: 70229796 USA made

ACS245(Gasket)

$2.95

Light componentsOrder # Price Description

The light components below fit ACS150, ACS152, ACS165, ACS205, JDS603, JDS606:IHS475 $6.00 Light Terminal (For JDS603 & JDS606 only)

IHS352 $14.50 Lens (Dimpled Outer Surface) w/ Guide Name

ABC388 $14.50 Lens (Smooth Outer Surface) w/ Guide Name

IHS353B $14.45 Black Ring (Bezel)

ABC560 $4.10 Seamless Gasket

IHS355 $3.85 Gasket

IHS354 $3.00 6-volt Bulb

IHS436 $2.95 12-volt Bulb

ABC320 $10.95 Reflector (For Head & Work Lights)

ABC378 $19.95 Reflector (For Tail Lights w/ Red Jewel Lens & 12-volt Bulb in Jewel Lens)

IHS474 $14.95 Jewel Lens w/ Base & 6-volt Bulb

ABC1115 $14.95 Jewel Lens w/ Base & 12-volt Bulb

ABC342 $1.80 Light Bulb (For 6-volt Jewel Lens)

ABC343 $1.80 Light Bulb (For 12-volt Jewel Lens)

ABC541 $18.70 Combo Light Switch w/ Lever Style Knob

ABC536 $6.50 Lever style Plastic Knob

The light components below fit ABC525, ACS355, IHS647, JDS581, JDS582:IHS475 $6.00 Light Terminal

JDS676 $18.15 Clamp Ring w/ Screw (Except for IHS647)

ABC3028 $12.50 NEW! Hobbs Rubber Light Bezel (For IHS647 only) NOTE: See insert A.

ABC527 $5.95 Concaved Mounting Washer

ABC353 $7.50 12-volt Sealed Lo-Beam Bulb 4411

ABC460 $16.50 12-volt Sealed Hi-Beam Bulb 4410

IHS899 $19.95 12-volt Sealed Beam Combination Rear Light Bulb (For ABC525)

ABC345 $1.80 12-volt bulb (Fits behind IHS899)

ABC541 $18.70 Combo Light Switch w/ Lever Style Knob

ABC536 $6.50 Knob only

The light components below fit ACS264V6, ACS264V12:ACS123 $14.95 Lens

OLS071 $9.95 Trim Ring

OLS072 $2.00 Gasket

ABC1979 $1.45 Base Gasket (For Bullet Tail Light)

ABC344 $1.80 6-volt Bulb

ABC345 $1.80 12-volt Bulb

Electircal parts

Rear view

ACS220 ACS245













Alli

sCh

alm

ers Emblems


ACS135 $29.95 Orange Front Grille Emblem Fits: D10 up to SN: 1950, D12 up to SN: 1950, D14 up to SN: 19000, D17 up to SN: 24000; Combines: A2, C, E, E3, F, K, Lawn & Garden: 116, 122, 616, 622Replaces: 70228474NOTE: Die cast, chromed, painted. Orange used through mid 1959.

ACS138 $29.95 Creme Front Grille Emblem Fits: D10 SN: 1951 & up, D12 SN: 1951 & up, D14 SN: 19001 & up, D15, (D17 SN: 24001 & up), D19, D21, ED40; Combines: A2, C, E, E3, F, K, Lawn & Garden: 616, 622 Replaces: 70233852NOTE: Die cast, chromed, painted. Creme used from mid 1959 to approx. 1965 then used ACS218.

ACS218 $58.50Front Grille Emblem w/ Decal Fits: Late D10, D12, D15, D17, D21, ED40, EIII Gleaner Combine (Appx. 1965 & up)Replaces: 70246724USA madeNOTE: Die cast, chromed.

ACS247 $73.50 Side Nameplate (Emblem) Fits Ag: D10, D12, D15, D17 (1961-63)Replaces: 70233854(3" wide x 29" length)NOTE: Creme background w/ black lettering. 2 required per tractor; Sold individually. Rivets & clips not included.

ACS248 $73.50 Side Nameplate (Emblem) Fits Industrial: D10, D12, D15, D17, I-40, I-400, I-60, I-600, 616, 622, 801, 802 (1961-63), Replaces: 70242700(3" wide x 29" length)NOTE: Black background w/ polished aluminum lettering. 2 required per tractor; Sold individually. Rivets & clips not included.

ACS1567 $0.95 Rivet only (For ACS247, ACS248 Side Nameplates) fits: D10, D12, D15, D17, I40, I60, I400, I600, 616, 622, 801, 802Replaces: 70234173 USA madeNOTE: 7 required per nameplate; Sold individually.

JDS630 $0.45Push Clip only (For ACS247, ACS248 Side Nameplates)NOTE: 7 required per nameplate;Sold individually.

Hand cranks, partsOrder # Price Description / Application

ACS133 $44.50Hand Crank w/ Spinner Fits: GReplaces: 70800646USA made

ACS133B $22.50Hand Crank Bracket Fits: GReplaces: 70800068USA made

ACS350 $44.50Hand Crank w/ Spinner Fits: B, C, CAReplaces: 70207893USA made

ACS1698 $59.50

Hand Crank w/ Spinner Fits: WC, WD, WD45, WF, RCReplaces: 70216933USA made

ACS096 $14.50

Hand Crank Holder / Brackets Fits: RC, WC, WD, WD45, WFReplaces: 70208443 (front clip), 70220855 (rear clip)

Crank hole castingFits: GReplaces: 70800086


Crank Hole Casting .............................................ACS058 .............. $22.95

Grille mounting tabsFits: WC, WD, WD45USA made


LH Grille Mounting Tab .....................................ACS1117 ............ $26.45

RH Grille Mounting Tab ....................................ACS1121 ............ $26.45NOTE: Bare metal. Must weld to existing grille. Sold individually.

Chas

sis

part

s

ACS1117 ACS1121









http://www.steinertractor.com/ACS133B








Allis

Chalmers

Replacement grille screens - USA madeOrder # Price Application

ACS203 $22.50

Fits: B, IB, C, CA(16" x 17")NOTE: 1 used per tractor.

ACS204 $18.50

Fits: RC, WC SN: 74330 & up, WD, WD45, (WF SN: 1904 & up)(9-1/4" x 19-1/4")NOTE: 2 used per tractor; Sold individually.

Hoods - USA made18 gauge, primed, heavier than originals! Fit to tractor before

painting.


ACS142 $198.50

Hood Fits: G, Replaces: 70800089NOTE: Heavier than original 20 gauge factory hood.

ACS153S $349.95

Hood (4 Hole) w/ Small (2-1/2") Exhaust Hole Fits: B, C, Replaces: 70225260NOTE: Works w/ ACS101 muffler.

ACS153L $349.95

Hood (4 Hole) w/ Large (4") Exhaust Hole Fits: B, C, CA gasReplaces: 70225260NOTE: Works w/ ACS103 muffler.

ACS177 $425.95

Hood Fits: WD, WD45 gas, Styled WC SN: 74330 & up, Styled WF SN: 1904 & up, Replaces: 70220616

ACS179 $499.95

Hood Fits: WD45 dieselReplaces: 70226960

Side panels - USA madeOrder # Price Description / Application

ACS147 $79.952-piece Side Panel Set LH Fits: D10, D12 (both up to SN: 9001), RH Fits: D10 SN: 3501- 9000, D12 SN: 3001 - 9000, Replaces: 70231587 (LH), 70236019 (RH)

ACS145(LH)

$45.95

Side Panel ACS145 (LH) Fits: D10, D12 (both up to SN: 9001), Replaces: 70231587

ACS146 (RH) Fits: D10 SN: 3501- 9000, D12 SN: 3001 - 9000Replaces: 70236019

ACS1511 (RH) Fits: D10 up to SN: 3500, D12 up to SN: 3000Replaces: 70231586

ACS146(RH)

$45.95

ACS1511(RH)

$39.40

ACS1513(LH w/ choke slot)

$43.95

Side Panel ACS1513 (LH) Fits: D14 up to SN: 19000, D15 series I up to SN: 9000, I60, I600 gas, diesel, Replaces: 70233497

ACS1515(LH w/out choke slot

$43.95

Side Panel ACS1515 (LH) Fits: D14 SN: 19001 & up, D15 series II SN: 9001 & upReplaces: 70232326

ACS1517 (RH) Fits: D14, D15, I60, I600 gas, dieselReplaces: 70232327

ACS1517(RH)

$43.95

ACS1519(LH)

$46.65Side Panel ACS1519 (LH) Fits: D17; Industrials: 616, 622, 801, 802 gas, LPReplaces: 70232149NOTE: Series I & II

ACS1521 (RH) Fits: D17 gas, LP up to SN: 42000 (Will fit diesel if trimmed)Replaces: 70237188NOTE: Series I & II

ACS1521(RH, 2-pc)

$54.65

Chassis parts





http://www.steinertractor.com/ACS153S














Alli

sCh

alm

ers Air cleaner parts


Caps, parts

ACS062 $19.95Air Cleaner Cap Fits: B, IB, C, Early CA, (G - thru hood), RC Replaces: 70208299(1-1/4" base I.D.)

ACS065 $19.95 Air Cleaner Cap Fits: Late CA, D10, D12, D14Replaces: 70242072(1-5/8" base I.D.)

ACS061 $19.95Air Cleaner Cap Fits: D15, WC, WD, WD45, WFReplaces: 70208222(1-3/4" base I.D.)

ACS226 $29.95 Air Cleaner Cap Fits: D17 gas up to SN: 42000, D17 diesel up to SN: 38963, WD45 dieselReplaces: 70226926(2.275" base I.D.)

IHS283 $47.05 Air Cleaner Cap Fits: D17 gas SN: 42001 & up, D19 gasReplaces: 70235918(2-1/4" I.D., 2-3/8" O.D.)USA made

ABC422 $12.95 Air Cleaner Oil Bath Filter Element Fits: Allis Chalmers models(3" wide x 78" long) NOTE: Replaces the mesh in existing air cleaners. Sold by the bag (usually 2 required for B - D14; 3 required for WC - WD).

Oil Cups, parts

ACS047 $18.50 Air Cleaner Oil Cup (Clamp-Style) Fits: B, IB, C, CA, RCReplaces: 70225818(4" I.D.; 4-7/16" O.D.)NOTE: Used on engine SN: CE13732 & up.

IHS181 $9.95

Air Cleaner Oil Cup Clamp (For ACS047)Replaces: 70225817

ACS115 $25.00Air Cleaner Oil Cup Fits: GReplaces: 70800760

FDS034 $14.95 Air Cleaner Oil Cup (Clamp-Held) Serviceable for Early D10 up to SN: 3501, Early D12 up to SN: 3001, D14Replaces: 70228478 (4-3/4" O.D. at lip, 4-15/32" I.D., 3" high) NOTE: Looks slightly different, but works great.

Air cleaner parts cont...Order # Price Description / Application

Oil Cups, parts cont...

FDS081 $10.30

Clamp (For FDS034 Cup)Replaces: 70225858

Pipes, parts

ACS117 $54.50

Air Cleaner Pipe Fits: GReplaces: 800147NOTE: If hoses are needed order (2) ACS208 hose.

ACS340 $18.50 Air Cleaner Pipe Bracket Fits: GReplaces: 70800142USA made

ACS284 $12.50 Air Cleaner Pipe Grommet Fits: 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, Replaces: 70267859(4" I.D., 5-1/16" O.D.)

Hose, Clamps

ACS208 $2.55 Air Cleaner Hose Fits: G, Replaces: 70800141(1-1/8" I.D., 1-5/8" O.D., 2-1/4" long) NOTE: 2 used per tractor;Sold individually.

ACS1722 $10.95 Air Cleaner to Carb Hose Fits: WC SN: 74330 & up, WD, (WF SN: 1904 & up), Replaces: 70208114(1-1/2" I.D. both ends) USA made

ACS1719 $18.95 Air Cleaner to Carb Hose fits: WD45 gas, W226 Power Unit (both SN: 96714 & up), Replaces: 70226266 (1-7/8" I.D. both ends, 8-7/16" outside curved length)

ABC492 $2.70 Clamp (For 1-5/8" O.D. ACS208 Air Cleaner Hose) Fits: G Replaces: 911290

FDS258 $3.60 Air Cleaner Hose Clamp (For 1-3/4" to 2" O.D. Hose) Fits: B, C, CA, D10, D12, RC, WC, WD, WFReplaces: 921912, 921913

Miscellaneous

ABC2443 $22.50 NEW! Dust Unloader Valve(Vacuator Valve) (For Dry Air Cleaners) Fits: D15 diesel, (D17 gas SN: 42001 & up), (D17 diesel SN: 38964 & up), D19 gas, dieselReplaces: 70235884 (1" I.D.)

Chas

sis

part

s





















Allis

Chalmers

Chassis partsPre-cleaner assys., parts


ABC1824 $49.95Pre-Cleaner Cap Assembly Fits: D15 diesel up to SN: 9000; Serviceable for ED40 & others using 2" I.D. base & 5-1/2" bowl, Replaces: 74016565(2" I.D. plastic base, 5-1/2" pre-cleaner O.D.) USA made

ABC383 $74.95Pre-Cleaner Cap Assembly Fits: D17 Gas and other models w/ 2-1/4" I.D. base & 7" bowlReplaces: 70257382, 70234832USA made

ABC512 $74.95

Pre-Cleaner Cap Assembly Fits: Allis Chalmers models w/ 2-1/2" I.D. base & 7" bowlUSA made

JDS741 $99.95 Pre-Cleaner Cap Assembly w/ Brass Nut Fits: Combines; K2 diesel, F2, (G, L, M gas) w/ 3" I.D. base & 7" bowl Replaces: 1306480(3" I.D. base)NOTE: Powder-coated green.

ABC470 $39.95Pre-Cleaner Cap Assembly Fits: Combines; K2 diesel, F2, (G, L, M gas) w/ 3" I.D. base & 7" bowlReplaces: 1306480(3" I.D. base)

ABC510 $64.60Pre-Cleaner Cap Assembly Fits: D21, (190, 190XT diesel), 200, 210, 220, 7000 thru 7050 w/ 4" I.D. base & 10-1/2" bowl, Replaces: 70249775

ABC554 $42.95Pre-Cleaner Cover w/ Brass Knurled Nut Fits: D15 diesel up to SN: 9001, HD3, I-60, I600 diesel (All w/ 5-1/2" bowl)Replaces: 70233662, 1127421(5-7/16" I.D.) USA madeNOTE: Aluminum.

ABC484 $24.95 Pre-Cleaner Bowl Fits: D15 diesel up to SN: 9001, HD3, I-60, I-600 diesel (All w/ 5-1/2" dia.)Replaces: 70233663NOTE: Clear plastic.

ABC484 specifications: Bowl O.D. at top = 5-1/2", Bowl O.D. at bottom = 5", Cone I.D. at top= 2-7/16", Bowl side height= 2-7/16", Overall height =3-9/16"

Pre-cleaner assys., parts cont...Order # Price Description / Application

JDS559 $24.95 Pre-Cleaner Cover w/ Brass Nut(For 7" bowl) fits: D17 gas to SN: 42001, diesel up to SN: 38964 & A thru F2 combines, Replaces: 71125803(Bowl O.D. at top = 7)NOTE: Green metal.

ABC338 $13.95Pre-Cleaner Bowl (7" dia.) For 2" to 3" inlet Fits: D17 gas to SN: 42001, diesel to SN: 38964 & A thru F2 combinesReplaces: 71125804

ABC338 specifications: Bowl O.D. at top = 7", Bowl side height = 3", Cone I.D. at top = 3-1/2", Overall height = 4-1/8"

JDS557 $68.95

Pre-Cleaner Base(For ABC338 Bowl & JDS559 Top) Fits: Combines; K2 diesel, F2, (G, L & M gas) w/ 3" I.D. base & 7" bowlNOTE: Metal. Check size before ordering.

JDS561 $75.00

Pre-Screener (Metal) w/out Screen Fits: All Donaldson Pre-Cleaners w/ 3" O.D. pipeNOTE: Powder coat green.

JDS535 $39.95Screen w/ Clip & 2 Springs (For Pre-Screener) Fits: JDS561 Pre-Screener and Gleaner combines F, G, L gas w/ 7" dia. pre-cleaner bowl, Replaces: 71141353(5-1/4" tall x 19-3/8)NOTE: Powder coat green.

JDS938 $4.95

Pre-Screener Clip & Springs Kit (For JDS535 Screen)NOTE: Powder coat green.

ABC339 $16.95 Pre-Cleaner Bowl (10-1/2" dia.)(For 3" to 4" inlet) Fits: D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060; Combines: G, L (D2900), L2 (D2900), 649I; 649T, M, M2 (D2900) all DieselsReplaces: 70651270, Can replace Donaldson P01-6330 NOTE: Clear plastic.

ABC339 specifications: Bowl O.D. at top = 10-1/2", Bowl side height = 3", Cone I.D. at top = 5-9/16", Overall height = 4"


















Alli

sCh

alm

ers Fuel tank, parts


ACS158 $404.68 Fuel Tank (Steel) Fits: GReplaces: 70800070 USA madeNOTE: Sealed w/ Red Kote® fuel tank liner.

ABC2672 $124.95 Fuel Tank Filler Neck Straightening Tool w/ Instructions fits: A, (D17 Early using buy clean fuel cap), M, U, UC, (Unstyled WC, WF up to SN: 2045) USA madeNOTE: Used to straighten bent filler necks & filler neck tabs to make the cap seal properly (not for use with tanks using baffled filler necks). This part is a duplicate of the factory service tool that works in many applications using the ABC1880, IHS226, IHS416 & JDS416 caps.

ABC494 $3.95 Fuel Tank Webbing fits: Tractors using webbed insulation between fuel tank mounts & other sheet metal parts(3' L x 1" wide x .042" thick) USA madeNOTE: Economy black woven nylon. Can be glued or riveted.

ABC1823 $4.95 Fuel Tank Webbing fits: Tractors using 1" wide webbing for fuel tanks & other sheet metal parts (3' L x 1" wide x .050" thick)NOTE: Black canvas, mildew resistant. Sold in 3-foot length.

ABC1656 $5.25 Fuel Tank Webbing fits: Tractors using 1-1/2" wide webbing for fuel tanks & other sheet metal parts (3' L x 1-1/2" wide x .050" thick) NOTE: Black canvas, mildew resistant. Sold in 3-foot length.

ABC1827 $5.50 Fuel Tank Webbing fits: Tractors using 2" wide webbing for fuel tanks & other sheet metal parts (3' L x 2" wide x .050" thick)NOTE: Black canvas, mildew resistant. Sold in 3-foot length.

Fuel caps w/ gasket, partsOrder # Price Description / Application

ACS172 $19.95Fuel Cap w/ Gasket Fits: G, B, IB, C, CA, RC, Styled WC, WD, WD45, WD45 diesel, Styled WFReplaces: 70207244NOTE: For gasket only use MHS043GK.

IHS338 $9.95Auxiliary Tank Fuel Cap w/ Gasket Fits: B, C, CA, D14, D17, U, WC, WD, WD45, WF, Replaces: 70204827USA made

Fuel caps w/ gasket, parts cont...Order # Price Description / Application

IHS226 $9.95

Vented Fuel Cap w/ IHS239 Gasket & Splash Guard (Says "Buy Clean Fuel - Keep It Clean") Fits: 'A', 'M', U, UC, Unstyled WC, Unstyled WF IHS226 Replaces: 70206622ABC1880 Replaces: 70206622(2-11/16" ID, 1.118" height (cap only))

ABC1880(Top vented)

$9.95

IHS239 $1.95Gasket only (For IHS226, ABC1880 Caps)Replaces: 70208065(2.563" O.D., 1.875" I.D., .125" thick)NOTE: NBR rubber.

IHS2642 $1.95 Gasket only (For IHS226, ABC1880 Caps)Replaces: 70208065(2.580" O.D., 1.900" I.D., .095" thick)USA madeNOTE: Rubberized cork.

MHS043 $9.95 Fuel Cap (Vented) w/ MHS043GK Gasket Fits: D10, D12, D14, D15, D17, D19, I-40, I-400, I-60, I-600, 170, 175, 180, 185; Serviceable for B, C, CA, G, IB, RC, Styled WC, WD, WD45, WD45 diesel, WFReplaces: 70253690 (2-7/8" O.D.)

MHS043GK $1.50Gasket only (For ACS172)(2.622" O.D., 1.500" I.D., 0.100" thick)USA madeNOTE: Rubberized cork gasket.

ACS336 $18.95 Fuel Cap w/ Gasket Fits: D21, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550, Replaces: 70262788, 70254013(3.475" O.D.)

ABC1221 $4.95 Gasket only (For ACS336 cap)Replaces: 70271531(2.242" I.D., 2.948" O.D.)USA madeNOTE: Rubberized cork.

Sediment bowl assys., partsOrder # Price Description / Application

ACS326 $29.95Sediment Bowl Assembly Fits: G, (170 SN: 7500 & up), 175, 180 (All gas), Replaces: 70253122, 70800069(Side inlet & outlet, 1/8" x 1/8" female pipe thread)

Chas

sis

part

s

Underside view

Underside view

Underside view

Underside view

Underside view

Underside view













http://www.steinertractor.com/MHS043GK





Allis

Chalmers

Chassis partsSediment bowl assys., parts cont...


ABC092 $27.30 Sediment Bowl Assembly Fits: B, C, CA, D14, (D15 gas up to SN: 9001), D17 gas up to SN: 42000, D19 gas to SN: 12000, IB, I-40, I-400, I-60, I-600, RCReplaces: 70237944 (3/8" pipe inlet, 1/8" pipe outlet, 1.280" long bowl. Includes 5/16" compression adaptor fitting)

ABC002 $29.95 Sediment Bowl Assembly Fits: D10, D12, D14, WC, WD, WD45, WF, (170 gas SN: up to 7500)Replaces: 70239167 (Includes shallow bowl w/ 3/8" pipe inlet, (2) 1/8" pipe outlets)NOTE: For tractors w/ 1 outlet use ABC092 sediment bowl assy.

ACS326, ABC092, ABC002 components

The following parts (sold separately) will fit ACS326, ABC092,

ABC002 Sediment Bowl Assys:


ABC123 $2.90 Glass Bowl, Replaces: 70237945(2" O.D., 1.280" L)

ABC039 $1.45 Gasket, Replaces: 70208362(2" O.D.) USA made

ABC563 $4.95 Bail Assembly w/ NutReplaces: 70223247 USA made

ABC229(Brass)

$3.50

Screen (3/8" dia. center hole)ABC534(Plastic)

$3.75


ABC281 $34.45 Sediment Bowl Assembly w/ 2.315" long Bowl & 1/4" x 5/16" Adapter Fits: D15 gas SN: 9001 & up, D15 diesel, D17 gas SN: 42001 & up, D17 diesel, D19 gas SN: 12001 & up, D19 diesel, D21, U, UC, WD45 diesel, 170 diesel, 175 diesel 180 diesel, 185 diesel, 190, 190XTReplaces: 70237946(3/8" pipe inlet, (1) 1/8" pipe outlet)

ABC281 components

The following parts (Sold separately) will fit ABC281 Sediment

Bowl Assy:


ABC124 $4.95 Glass Bowl, Replaces: 70237947(2.315" L, 2-1/8" O.D. )

JDS642 $0.95 Gasket, Replaces: 70208137USA made

ABC236 $7.20 Bail Assembly w/ Brass NutReplaces: 70223248(2-1/8" O.D., 2.370" L)

ABC229(Brass)

$3.50

Screen (3/8" dia. center hole)ABC534(Plastic)

$3.75

Fuel filters, partsOrder # Price Description / Application

ABC490 $6.45

In Line Fuel Filter w/ Hose & Clamps Fits: Allis Chalmers models using 3/8" fuel line NOTE: Must splice fuel line to use. Will help to keep rust & dirt out of carburetor.

ABC1315 $8.50 Fuel Tank ScreenFits: Most Allis Chalmers models w/ stem style sediment bowl Will fit ABC092, ABC281, IHS713, IHS1577 sediment bowl assemblies (.375" screen O.D., .216" pipe O.D., 2.530" o/a length) USA madeNOTE: Slides on top of sediment bowl inlet to prevent dirt from the fuel tank bottom from entering the sediment bowl assembly. To fit ABC281, IHS713, IHS1577 customer must drill sediment bowl stem out.

ABC1423 $29.95Diesel Single Fuel Filter Assembly w/ Glass Bowl fits: 160, 170, 175, 5040, 5045, 5050, Replaces: 72089560(4 1/2" x 20 UNF ports)NOTE: Use caution when threading fuel line in, as it is not returnable if threads have been cross threaded.

ABC1421 $5.25 EACH

Fuel Filter Element w/ Seals (For Cav/Simms fuel filters) Fits: 160, 170, 175, 5040, 5045, 5050, 6040 & 6140, Replaces: 70251397, Cav # 7111/296(3-1/2" O.D. x 3/4" I.D. x 2.85" tall)NOTE: Sold individually.

ABC123 ABC039 ABC563 ABC229 ABC534

ABC124 JDS642 ABC236 ABC229 ABC534




















Alli

sCh

alm

ers Steel fuel lines


ACS2066 $24.95Fits: GReplaces: 70800066(1/4" O.D., 11" o/a length, 1/8" NPT inverted flare fittings)

ACS1974 $29.95 Fits: B, C, CA, IB, D10, D12Replaces: 70207278, 70215478, 70243108(13-1/8" o/a length, 1/4" tube O.D.,1/4" compression fittings)NOTE: May have to trim to fit.

ACS1863 $32.95 Fits: WDReplaces: 70220636(23" o/a length, 1/4" tube O.D.,1/4" 45° inverted flare nuts )

ACS1866 $32.95Fits: WD45 gasReplaces: 70226281(24" o/a length, 1/4" tube O.D.,1/4" 45° inverted flare nuts)

Throttle partsOrder # Price Description / Application

ACS1251 $19.50Throttle Lever Fits: GReplaces: 70800149(6-3/4" long, 3/4" wide, .104" thick)USA made

ACS181 $18.75 Throttle Rod Fits: G, Replaces: 70800152(45-1/4" o/a length) USA madeNOTE: Powder coat AC orange.

ACS334 $12.95 Throttle Rod Bracket Fits: GReplaces: 70800302USA made

ACS182 $7.95 Throttle Rod Bracket Spring Fits: G, Replaces: 70800248(2-1/2" o/a length; 11/16" O.D.)USA made

ACS1248 $19.50Throttle Lever Fits: B SN: 101 & up, IB SN: 1001 & up, C, CA, Replaces: 70211268(6-7/8" long, 3/4" wide, .104" thick)USA made

ACS191 $94.75 Throttle Quadrant w/ BushingFits: WD, WD45Replaces: 70227004 (quadrant), 70222447 (bushing)

Throttle parts cont...Order # Price Description / Application

ACS225 $19.95 Steering Shaft Bushing Fits: WD, WD45, Replaces: 70222447(.900" I.D., 1.009" O.D., .057" thick, .987" length)

ACS184 $6.95 Throttle Quadrant & Hydraulic Lever KnobFits: CA & G on Hydraulic Lever; WD, WD45, (D10, D12, D14, D15, D17, 180, 185, 190, 190XT, 200, 210 & 220 for numerous applications), Replaces: 70220901(.466" hole I.D., 1.213" o/a length)

ACS185 $13.50Throttle Quadrant & Hydraulic Lever Slide / Block Fits: WD, WD45Replaces: 70222454

ACS267 $13.95Throttle Return SpringFits: WD, WD45 gasReplaces: 70220923(6-7/8" o/a length) USA made

Clutch, transmission partsOrder # Price Description / Application

ACS346 $349.95 Clutch Kit fits the following w/ 8-1/2" diameter clutch: B, IB, C, CAReplaces: 70226262 (pressure plate), 70226729 (clutch), 70227704 (throwout bearing), 70206968 (pilot bearing)(8-1/2", 1-1/8" dia. spline, 10 splines, Pressure plate mounting holes spaced in groups of 2) NOTE: Includes new 8-1/2" woven clutch disc, pressure plate, throwout bearing, and pilot bearing.Measure clutch prior to ordering. Please note this does not include a pilot bushing. Some tractors require a bushing instead of a bearing. The bushing is not available through STP, Inc.

ACS2470 $158.50 Clutch Kit fits the following w/ 9" diameter standard (not heavy duty) clutch: 'Some' early B, C, CA, (D10 up to SN: 3501), (D12 up to SN: 3001), D14, D15Replaces: 70206968 (9" dia., 1-1/8" - 10 splined hub, Pressure plate mounting holes spaced in groups of 2) NOTE: Includes new 9" woven clutch disc, pressure plate, throw out bearing, pilot bearing & clutch lineup tool. Measure clutch prior to ordering. Please note this does not include a pilot bushing. Some tractors require a bushing instead of a bearing. The bushing is not available through STP, Inc.

Chas

sis

part

s


















Allis

Chalmers

Clutch, transmission parts cont...Order # Price Description / Application

ABC496 $19.95 Clutch Throw-Out Bearing Fits: B, C, CA (All w/ 9" clutch), D10 up to SN: 3500, D12 up to SN: 3000, D14 up to SN: 3000, D15 up to SN: 3000, D17 up to SN: 75000, D19, ED40, H3, H4, HD3, HD4, 180, 185, 190, 190XT, 200; Combines: A, A2, C, C2, F, F2, F3, L up to SN: 4316, M, M2, M3, Replaces: 70235079(2.078" I.D., 0.801" thick, 3.269" face dia.)NOTE: Measure before ordering.

ACS189 $14.95 Clutch Inspection Cover Plate w/ Spring Steel Clips Fits: B, IB, C, CA, D10, D12, D17, D19 Replaces: 70208465

ACS270 $12.50 Clutch Pedal Return Spring Fits: B up to SN: 124037, (IB up to SN: 2836), C, (CA up to SN: 30611)Replaces: 70225646 (4.300" o/a length, .100" wire dia., .750" body dia.)

MHS076 $36.95Clutch Disc Fits: GReplaces: 70800662(6-1/2" dia., 15/16"-10 spline)

ABC550 $85.65Pressure Plate (New, not rebuilt) Fits: G, Replaces: 70800027(6-1/2" dia.) NOTE: Must recheck clutch adjustment & clearance after installation.

ACS076 $28.00 Clutch Throw-Out Bearing Fits: GReplaces: 70800041(1.500" center hole)

ABC1437 $7.75

Clutch Alignment Tool Fits: G(15/16" spline O.D., 10 splines .625" pilot)

ACS1256 $22.95 Flywheel Cover Fits: G, Replaces: 70800388(8" c.c. bolt holes) USA made

ABC1928 $38.75 Clutch Throw Out Bearing Fits: B w/ 8 1/2" clutch , (D10, D12 SN: 3502 & up), RC, WC, WD, WD45Replaces: 70204829 (2.060" I.D., 3.215" O.D., 0.810" thick) USA made

ACS2980 $114.95 NEW! Clutch Disc Fits: WC, WD, WF, WD45 gas, LP, dieselReplaces: 70226764(10" O.D., 1-1/4" spline diameter - 10 spline)


ABC2974 $168.50NEW! Pressure Plate (Rebuilt) Fits: WC, WD, WF, (WD45 to SN: 99647)Replaces: 70230506, 70208286(10" O.D., 6 springs)USA made

ACS2982 $194.50 NEW! Pressure Plate Fits: WD45 SN: 99648 & up; Will also fit WC, WD, WF, Early WD45 when heavy duty pressure plate is desiredReplaces: 70230424, 70230506(10" O.D., 9 springs) NOTE: Six mounting holes are equally spaced.

ACS2678 $49.00 NEW! Brake & Clutch Pedal Shaft Fits: WD, WD45, WD45 dieselReplaces: 70222650(0.996" O.D, 17 1/4" length) USA madeNOTE: Bare finish.

ABC2937 $13.50NEW! Clutch Pilot Bearing Fits: WD, WD45, D17, D19, D21, 170 thru 220, 7000, Replaces: 226859, 70226859(0.984" I.D., 2.047" O.D., 0.590" wide)NOTE: Sealed bearing.

ACS1507 $14.95 Clutch Inspection Cover Plate w/ Spring Steel Clips Fits: D14, D15, Replaces: 70227610NOTE: Primer paint.

ACS2972 $317.75 NEW! Clutch Kit fits: WC, WD, WF, (WD45 up to SN: 99647), Replaces: 70226859 (pilot bearing), 70204829 (throw-out bearing), 70226764, 70227074 (clutch), 70230506, 70208286 (pressure plate) (10" diameter, 1-1/4" - 10 splined clutch hub, 6 spring pressure plate; pilot bearing - 0.984" I.D., 2.047" O.D.) NOTE: This clutch kit includes a rebuilt pressure plate, new clutch disc, throw-out bearing, and pilot bearing (does not include pilot bushing used instead of bearing on WC & WF).

ACS2978 $348.50 NEW! Clutch Kit fits: WD45 SN: 99648 & up gas, LP, diesel; Will also fit WC, WD, WF, Early WD45 when heavy duty pressure plate is required, Replaces: 70226859 (pilot bearing), 70204829 (throw-out bearing), 70226764, 70227074 (clutch), 70232594, 70230424 (pressure plate)(10" diameter, 1-1/4" I.D. - 10 splined clutch hub, 9 spring pressure plate; pilot bearing - 0.984" I.D., 2.047" O.D.)NOTE: This clutch kit includes a new pressure plate, clutch disc, throw-out bearing, and pilot bearing.

Clutch, transmissions, parts continue on next page

Chassis parts




















Alli

sCh

alm

ers Clutch, transmission parts cont...


ABC2501 $19.85 Clutch Throw Out Bearing Fits: D17 SN: 75001 & up, 170, 175, 210, 220, 7000, Replaces: 70260803(2.490" I.D., 4.060" O.D., 0.870" wide)NOTE: Sealed bearing, no need to grease.

ACS321 $12.50 Clutch Pedal Return Spring Fits: D21 Replaces: 70239262(4.590" o/a length)USA made

ABC1937 $34.95Throw Out Bearing Fits: 9130, 9140, 9150, 9170, 9190, 9435, 9455, Replaces: 72160065USA made

ACS021 $95.00Main Shaft Drive Gear Fits: GReplaces: 70800377NOTE: 41 teeth.

ACS282 $199.00 Reverse Pinion Shaft Gear Fits: Late CA SN: 13291 & up; D10 SN: 7760 & up (To fit older must also use ACS285); D12 SN: 6091 & up (To fit older must also use ACS285); D14 up to SN: 19001; D15 SN: 17565 & up (To fit older must also use ACS285), Replaces: 70241367(1.092" total width) NOTE: 30 teeth.

ACS041 $95.001st Pinion Shaft Gear Fits: D10, D12, D14, D15Replaces: 70228296NOTE: 50 teeth. Close out.

ACS285 $199.95 3rd Pinion Shaft Gear Fits: Late CA SN: 13291 & up; D10 SN: 7760 & up (To fit up to SN: 7759 must also use ACS282); D12 SN: 6091 & up (To fit up to SN: 6090 must also use ACS282); D14; D15 SN: 17565 & up (To fit up to SN: 17564 must also use ACS282), Replaces: 70234575NOTE: 37 teeth.

ACS048 $32.50 Transmission Bushing Fits: CA, D10, D12, D14, D15Replaces: 70227316(1-1/8")

ACS049 $32.50 Transmission Bushing Fits: CA, D10, D12, D14, D15Replaces: 70227317(1-3/16")

ACS045 $142.85 Transmission Input Shaft Fits: 180, 185, 190 SN: 9001 & up, 190XT, 200, Replaces: 70256571


ABC387 $7.55Transmission Input Shaft / Main Shaft Seal fits: 7010, 7020, 7040, 7045, 7060, 8010, 8030, 8050, 8070 Replaces: 70275802(1.375" I.D., 2.000" O.D., .337" width)

ACS046 $75.00

3rd & 4th Shift Fork Fits: 180, 185, 190 SN: 9001 & up, 190XT SN: 9001 & up, 200Replaces: 70261385

ACS302 $24.20Hydraulic / Transmission Dipstick Fits: CA, D10, D12, WD, WD45Replaces: 70224611

Gear shift lever, partsOrder # Price Description / Application

ACS171 $89.95

Curved Gear Shift Lever w/out Pins Fits: WD45, (Late WD SN: 127007 & up)Replaces: 70257580

ACS254 $13.45Gear Shift Lever Washer & Snap Ring Fits: B, C, CA, D10, D12, D14, D15, ED40, G, WC, WD, WD45, WFReplaces: 70202875 (snap ring), 70207772 (retainer) NOTE: Retains gear shift lever into housing.

ACS255 $12.65 Gear Shift Lever Pin (Standard), Pair Fits: B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces: 70203465(Standard: .325" wide square end,.250" round pin dia.)

ACS253 $12.65 Gear Shift Lever Pin (Oversize), Pair Fits: B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces: 70218859(Oversize: .375" wide square end, .285" round pin dia.) NOTE: ACS253 is used to "tighten up" worn shift lever. Must be ground to fit existing worn lever.

Chas

sis

part

s

















Allis

Chalmers

Chassis partsKnobs

Order # Price

ABC085 $4.50

Knob (Bakelite) (3/8" NF)

Description / Application

Gear Shift Lever Knob fits: A, RC, (U SN: 12001 & up), WC, WD up to SN: 127006, WF, Replaces: 70202862

ACS215 $4.65

Knob (Rubber) Replaces: 70228215


Control Lever Knob fits: D10, D12, D14, D15, D17, D19; Lawn & Garden: 116, 122 NOTE: 3 used per tractor; Sold individually.

ACS184 $6.95

Knob (Rubber) Replaces: 70220901 (.466" hole I.D., 1.213" o/a length)


Hydraulic Lever Knob fits: CA, D17, GSnap Coupler Lever Knob fits: D10 thru D15, WD, WD45Seat Base Knob fits: 180, 185, 190, 190XT, 200, 210, 220

ABC221 $4.50Knob (Bakelite) Replaces: 70206456 (3/8"-24 NF)USA made


Brake Lever Knob fits: B up to SN: 1101Final Drive Clutch Knob fits: CAPTO Lever Knob fits: RC, WC, WD, WD45Transmission Lock Out Lever Knob fits: RC, WC

ACS2509 $14.85

Knob (OEM) (Rubber) Replaces: 70233770USA made


Shift Range Lever Knob fits: D10, D12, D19, 170, 190Hyd. Lever Knob fits: D10 SN: 3501 & up, D12 SN: 3001 & upPTO & Shift Lever Knob fits I40, I400

Knobs cont...Order # Price

ACS202 $5.85

Knob (Rubber) Replaces: 70226023


Gear Shift Lever Knob fits: B SN: 120982 & up, IB SN: 26006 & up, C, CA SN: 8971 & up, D10, D12, D14, D15, D17, D19, D21, late WD SN: 127007 & up, WD45, WD45D, 170, 175, 180, 185, 190, 190XT, 200 up to SN: 4001, 210, 220PTO Lever Knob fits: 180 & 185 w/out clutch packThrottle Lever Knob fits: Some Allis Chalmers modelsCab Door Knob fits: 7000 SN: 8001 & up, 7010, 7020, 7045; 7060 SN: 6001 & up, 7080 SN: 3001 & up, 7580 SN: 1605 & up

ACS2699 $7.95 NEW! Knob Replaces: 70228321(1/4" - 20 thread, 1.035" O.D.)USA made


Choke Knob fits: D10 up to SN: 3501, D12 up to SN: 3001, D14, D17 up to SN: 32001

Fuel Shut Off Knob fits: D17 diesel up to SN: 32001Hydraulic Selector Valve Knob fits: D14, D15, D17 up to SN: 75000Hydraulic Spool Valve Knob fits: D14 (2 - 3 used), D15 (2 - 3 used), D17 up to SN: 75000 (2 - 3 used)

ABC362 $5.50

Knob (Bakelite) Replaces: 70242338(3/8"-24 NF, 1.250" O.D.)


PTO & Belt Pulley Lever Knob fits: WC, WF, WD, WD45, WD45DHydraulic Lever Knob fits: D10, D12Snap Coupler Release Lever Knob fits: D17PTO & Throttle Knob fits: D21PTO w/out Clutch, Throttle Lever, Traction Booster Lever, Hydraulic & PTO levers Knob fits: 190, 190XT, 190XT III (up to SN: 14186)Throttle Lever, Traction Booster Lever, Hydraulic & PTO Levers Knob fits: 200, 210, 220, 200 FWAHydraulic Lever Knob fits: 5020, 5020 FWD, 5030Hydraulic Sensitivity Controls, Quick Hitch Knob fits: 6060, 6070, 6080Hydraulic Lever Knob fits: 6140Pump Control Knob fits: 170, 175, 185 SN: 12800 & up, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 4W220, 4W305










Alli

sCh

alm

ers Gear shift boots


ACS263 $14.95Fits: GReplaces: 70800354(2-1/16" bottom I.D., 11/16" hole dia.)

ACS174 $9.95Fits: B, IB, C, CA, D10, D12, D14, D15, ED40, I-40, I-400, I-60, I-600, RC, WC, WD, WD45, WF, Replaces: 70232192(1-3/4" bottom I.D.; 9/16" hole dia.)

ACS256 $9.95 Fits: D17, D19, D21, 170, 175, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070Replaces: 70233767(2-1/8" bottom I.D., 1/2" hole dia.)

Steering wheels, partsSteering wheels are just like original

All new material • Steel spokes


ACS129 $49.50Steering Wheel Fits: GReplaces: 70800101(15" widest dia., 11/16" - 3/4" tapered hub)

JDS997 $119.95 NEW! Steering Wheel Fits: Early B, IB, C (All using covered spoke wheel), Replaces: 205623, 207370, 207562 (15" dia., tapered & keyed hub, 11/16" - 3/4" shaft, 3 COVERED TO CENTER spokes)

JDS282 (15" dia.)

$49.50

Steering WheelFits: B, C, CAReplaces: 70261861JDS282: (15" dia., Tapered, keyed & stepped hub, 11/16" - 3/4" shaft, 3 spokes) ACS106: (16" dia., Tapered, keyed & stepped hub, 11/16" - 3/4" shaft, 3 spokes)

ACS106(16" dia.)

$49.50

ACS136 (Black)

$5.25Steering Wheel Nut Fits: B, IB, C, CA, GReplaces: 913133, 70207562ACS136: (5/8"-18 NF x .859" tall)USA madeFDS197: (5/8"-18 NF x 1.132" tall)

FDS197(Chrome)

$6.45

Steering wheels, parts cont...Order # Price Description / Application

ACS108 $49.50 Steering Wheel fits: D14 up to SN: 19000, D17 up to SN: 24000, (RC - but has bigger dia.), Styled WC, WD, WD45, Replaces: 70229677 (18" dia., round hub w/ 3/8" drive hole, 7/8" shaft, 3 spokes)NOTE: Pin NOT included.

ACS225 $19.95 Steering Shaft Bushing Fits: WD & WD45; Also used as a front steering shaft support shaft bushing for D14, D15, D17 diesel, D19Replaces: 70222447

ACS134 (Black)

$49.50

Steering Wheel Fits: D10, D12, (D14 SN: 19001 & up), D15, (D17 SN: 24001 & up), D19, D21; Combines: A2, C, E, E3, F, KACS134 Replaces: 70232033ACS137 Replaces: 70233851(17-1/2" dia., splined hub, 36 splines, 7/8" shaft, 3 COVERED TO CENTER spokes) NOTE: Black wheel used through mid 1959. Creme wheel used mid 1959 & up.

ACS137(Creme)

$52.50

ACS135 (Orange)

$29.95

Steering Wheel CapFits: Same as ACS134, ACS137Replaces: 70233852NOTE: Die cast chromed, painted. Orange used through mid 1959. Creme used mid 1959 to approx. 1965 (then use ACS218).

ACS138(Creme)

$29.95

ACS216 $58.50

Steering Wheel EmblemFits: (D14 SN: 19001 & up), D15, (D17 SN: 24001 & up) (All w/ power steering)Replaces: 70232712 USA made

ACS218 $58.50Steering Wheel Emblem w/ Decal Fits: D10, D12, D15, D17, D21, ED40, EIII Gleaner Combine (Appx. 1965 & up)Replaces: 70246724 USA madeNOTE: Die cast, chromed.

Chas

sis

part

s

ACS136 FDS197



















Allis

Chalmers

Chassis partsSteering wheels, parts cont...


ACS308 $124.95 Steering Wheel Fits: 170, 175, 180, 185, 190 SN: 2485 & up, 190XT, 200, 210, 220, 7030, 7040, 7050; Industrial: I40, I60, I400, 500, 510, 512, 585, I600, 610, 612, 614, 615, 621, 715; Combines: A, E3, F, F2, F3, G, K, K2, L, L2, L3, M, M2, M3, N5, N6, N7, R40, R60, R70Replaces: 70256852 (15-3/4" dia., 6-3/4" dish, .853" spline O.D., 36 spline, 3 COVERED TO CENTER spokes) NOTE: Deep dish.

OLS139 $59.95 Steering Wheel Fits: 6060, 6070, 6080, 7000 SN: 8001 & up, 7010, 7020, 7045, 7060 SN: 6001, 7080 SN: 3001 & up, 7580 SN: 1605 & up, 8010, 8030, 8050, 8070, 8550, 4W220, 4W305Replaces: 71142487 (15" dia., 4-1/2" dish, 36 splined hub, 13/16"shaft, 0.853" spline O.D., 3 COVERED TO CENTER spokes)NOTE: Shallow dish round wheel.

ACS243 $22.50Steering Wheel Cap Fits: Same as ACS308, OLS139Replaces: 71142505(2.528" dia.)

ABC504 $4.95 Steering Wheel Nut Fits: D10 thru D21, WF, 170 thru 220, 6060 thru 8550; Industrial: I40, I60, I400, 500, 510, 512, 585, I600, 610, 612, 614, 615, 621, 715, Replaces: 70252471(13/16"-20 NEF)

MIS103 $10.75

Steering Wheel Spinner Fits: Allis Chalmers modelsNOTE: Aluminum.

Steering worm bearingFits: D14, D15, D17, D19 (All w/ manual steering), Replaces: 70228150(1.700" O.D., 1.197" I.D., .455" wide)


Steering Worm Shaft Bearing. ...........................ABC558 .............. $14.95NOTE: 1 used per tractor; Sold individually.

Steering shaft sealFits: D14, D15 w/ manual or power steering, Replaces: 70229967(2.380" O.D., 1.500" I.D., 0.500" wide)


NEW! Vertical Splined Steering Shaft Seal ....ABC2837 ............ $9.95

Steering shaft cross & bearingFits: D14, D15, D17, D19, (RC, WC & WF when using later style joint), WD, WD45Replaces: 70224890


Steering Shaft Cross & Bearing (U-Joint) ........ABC2507 ............ $14.95NOTE: 1 to 4 used per tractor; Sold individually.

Steering joints repair kits - USA madeNOTE: Universal steering joints repair kit w/ yokes, pins &

grease fitting. Check measurement before ordering.


ABC167 $96.10

Fits: RC, WC, WD, WD45, WD45DReplaces: 70202152NOTE: Must redrill pin holes to fit shaft.

ABC167 measurements: 7/8" & 1" dia. shaft, .750" dia. u-joint caps

ABC280 $137.95 Fits: Late WC, WD, WD45, WD45DReplaces: 70224825NOTE: Heavy duty; loader use. Must grind yokes for clearance.

ABC280 measurements: 7/8" & 1" dia. shaft, .936" dia. u-joint caps

Steering partsOrder # Price Description / Application

ACS068 $98.95

Steering Shaft Fits: B, IB, GReplaces: 70211001, 70255675NOTE: For Ross steering box only. Single prong, rides in worm.

ACS341 $74.95Steering Shaft Tube w/out Bushing Fits: B w/ Ross steering boxReplaces: 70210472(40-15/16" length, 1-1/2" O.D.) USA made

ACS343 $74.95Steering Shaft Tube w/out Bushing Fits: C w/ Ross steering box Replaces: 70219390(40" o/a length, 1-1/2" O.D.) USA made

ACS337 $64.95

Steering Shaft Tube w/out Bushing Fits: G, Replaces: 70800097(50-1/2" length, 1-1/2" O.D.) USA made

Steering parts continue on next page



http://www.steinertractor.com/OLS139



http://www.steinertractor.com/MIS103










Alli

sCh

alm

ers Steering parts cont...


ACS339 $21.40Steering Shaft Tube Bushing Fits: B, IB, C, CA, G (All w/ Ross steering box), Replaces: 70210475(1-3/8" O.D., 3/4" I.D.)USA made

ACS345 $28.50

Steering Tube Mounting Brackets (Pair)Fits: B, IB, C, CA, GReplaces: 70207218USA made

ABC468 $3.95Front Spindle Bushing fits: B, IB, C, CA, D10, D12, Replaces: 70205601(1.250" I.D., 1.375" O.D., 1.500" long)NOTE: 4 used per tractor; Sold individually.

Power steering partsOrder # Price Description / Application

FDS1274 $54.95

Power Steering Pump Pulley Fits: Tractors using Eaton style pump (3.750" O.D., .671" bore, .125" keyway, .500" wide belt groove)NOTE: Cast iron.

ABC1417 $37.45Power Steering Pump Pulley Fits: Allis Chalmers models(5" O.D., 0.675" bore, 1/8" keyway, 0.9715" total width for 1/2" belt)USA made

ABC414 $11.55Power Steering Pump Belt Fits: D17 gas SN: 42001 & upReplaces: 70237386(1/2" x 41-1/4")NOTE: Verify belt size before ordering.

ABC1414 $48.75Power Steering Pump Port Block (For tractors using Eaton style pump w/ separate reservoir) fits: Allis Chalmers models, Replaces: Eaton 20925, AG33547A USA made

ABC1419 $4.95Bolt (For ABC1414)Replaces: Eaton 14126 USA madeNOTE: Yellow zinc; Grade 8.

Power steering parts cont...Order # Price Description / Application

IHS338 $9.95Power Steering Reservoir Cap w/ Gasket Fits: WD45 gas, dieselReplaces: 70204827USA made

IHS555 $730.50Char-Lynn Power Steering Torque Generator w/out port blockFits: Allis Chalmers models(7/8" shaft)

Torque Output at 1000 PSI - 1100 in lbs.; Rated Operating Pressure - 1000 PSI; Max. Operating Speed at 3 GPM - 65 RPM; Recommended Fluid Input - 3 to 4 GPM

IHS673 $69.95

Port Block only (For IHS555 Generator)USA made

ABC380(Original)

$148.50

Char-Lynn Power Steering Slip Fit Coupler (For IHS555 Generator) ABC380: (3-3/8" to 3-1/2" adjustable length) USA made

ABC497: (2-5/8" o/a length)USA made

ABC497(Economy)

$18.25

IHS740 $223.35 Power Steering Priority Flow Control Valve fits: Allis Chalmers models w/ LIVE hydraulics (1/2" NPT inlet, 3/8" NPT return, 1/2" NPT to remote cyls.) USA made NOTE: Eliminates belt driven pump, pulleys & brackets. Enables you to use your hydraulic pump to operate the power steering. Is preset at 1500 PSI & 8 gpm. Adjust to your application.

Tie rodsOrder # Price Application / Dimensions

ACS213 (LH)

$63.95

Tie Rod End Fits: B, CACS213 Replaces: 70207726ACS211 Replaces: 70207725(13/16" x 18 thread)

ACS211 (RH)

$63.95

Chas

sis

part

s Underside view

















Allis

Chalmers

Chassis partsTie rods cont...Order # Price Description / Application

ACS066 $69.50 2-Piece Tie Rod fits: (CA w/ adjustable wide front axle; Must use a 7 degree tapered reamer to fit steering arms.), D14, D15, D17, D19, WD, WD45 (if cut to length), 170 up to SN: 170 - 7500, 175 up to SN: 175 - 2035, 180, 185, 190, 190XT, 200, Replaces: 70249418, 70254661, 70254662, Can Replace 70250141, 70250142 (Inside tie rod 16-3/8" long grease fitting to end, .782" dia. rod, Outer tube 17-3/8" long grease fitting to end, 1.560" O.D. tube, tie rod end tapers to .660" to .735")

Tie rod bootsNOTE: Specify size when ordering (Base I.D. x Height x Hole I.D.)

Order # Price Application / Dimensions

FDS336 $3.50Serviceable for GReplaces: 70800442(1.200" base, .475" tall, .500" hole)

ABC368 $3.35Fits: B, IB, C, CA, D10, D12Replaces: 71115779(1.675" base, .900" tall, .625" hole)

ABC370 $3.50 Fits: D10, D12, D14, D15, D17, D19, WD, WD45, 170, 175, 180, 185, 190, 190XT, 200Replaces: 70223558(1.800" base, .765" tall, .740" hole)

ACS320 $12.50Fits: D21, 210, 220Replaces: 70239467(2.525" base, .950" tall, 1.100" hole)

JDS736 $3.95 (1.500" base, .735" tall, .550" hole)ABC369 $2.95 (1.575" base, .600" tall, .650" hole)ABC371 $3.25 (1.300" base, .965" tall, .500" hole)FDS337 $3.95 (1.450" base, .600" tall, .550" hole)

Seats, partsOrder # Price Description / Application

ACS116 $33.50Metal Seat Back Fits: B, CReplaces: 70208664

ACS175 $42.80 Spring Support Fits: B, C, Replaces: 70208874USA made NOTE: Spring steel, Powder coat orange. 2 spring supports used per tractor; Sold individually.

Seats, parts cont...Order # Price Description / Application

ACS157 $6.75Hardware Kit (For ACS116 Metal Seat Back) NOTE: Includes (4) square nuts, (4) flat head screws & (4) lock washers. Like original.

ACS111 $72.50 Bottom Seat Cushion Fits: B, CReplaces: 70205693(28" long x 15" wide x 4" tall) USA madeNOTE: Black vinyl; Wood backed.

ACS071 $32.15 Seat Back (Back Rest) Fits: IB, RC, WC, WF, Rumley 6Replaces: U2743(10-5/8" x 5-5/8" curved) USA made

FDS067 $48.50 Seat Pan fits: RC, WC, Some WD, WD45, WF (All w/ 1-bolt mount seat)Replaces: 70225050(19" dia. pan, original seat pan was a 21" dia.) NOTE: Steel, 9 hole, bolt down, non-flip back.

ABC372 $18.30Seat Repair Kit w/ Rivets (For FDS067 Seat Pan)(5-1/2" O.D.; 5/8" center bolt hole)USA made

ACS176 $14.95 Seat Pivot Bolt Bushing Fits: WD up to SN: 127006Replaces: 70225041NOTE: 2 used per tractor; Sold individually.

ACS328 $24.95 Seat Pivot Bolt Bushing Fits: CA w/ pan seat, WD SN: 127007 & up, WD45, WD45D, Replaces: 70225183(3.368" o/a length, .635" I.D.)NOTE: 1 used per tractor.

ACS1891 $14.95 Seat Bumper fits the following w/ a standard pan style seat: D10 SN: 2267 & up, D12 SN:2242 & up, D14, D15, D17, D19, D21, (170 thru 190XT w/out deluxe padded seat), Replaces: 70229703, 910880 (nut), 904204 (washer)(1.043" long, 1.015" dia.)

MIS2679 $32.75NEW! Orange Tractor Seat Pad Fits: 19" Pan (side to side)(Foam pad, drawstring)USA made

MIS006AC $29.95Orange & White Tractor Seat Pad Fits: 19" Pan (side to side)(Foam pad, drawstring)USA made

Seats, parts continue on next page

JDS736 ABC369 ABC371 FDS337






















http://www.steinertractor.com/MIS006BK


Alli

sCh

alm

ers Seats, parts cont...


MIS006BK $29.95

Black Tractor Seat Pad Fits: 21" Pan (side to side)(Foam pad, drawstring)USA made

ACS221(Assy)

$349.95Seat Cushions w/ Steel Frame Fits: D10, D12, D14, D15, D17, D19, D21; Will also fit some 170, 175, 180, 185, 190, 190XT, 210, 220 (All using 2-Piece seat w/out arm rests)ACS221 Replaces: 70236318USA made NOTE: Restoration quality. Metal backed. Cushions are embossed like original!

ACS222 Replaces: 70236460 USA madeNOTE: Metal backed.

ACS223 Replaces: 70236461USA madeNOTE: Metal backed.

ACS222(Back rest)

$95.95

ACS223(Bottom)

$126.50

ABC445 $139.30 Universal Full Suspension Seat w/ Back Rest & 5-Angle Base (w/ Slide Track & Mounting Brackets)Fits: Allis Chalmers modelsNOTE: Can be adapted to fit many tractors & lawn mowers.

Seat shock absorbersOrder # Price Description / Application

ACS161 $108.50 Seat Shock Absorber w/ Spring & Bushing Fits: (CA - shock only; Must reuse outer spring); WD up to SN: 127006Replaces: 70222450 (shock), 70223213 (spring)

ACS196 $99.80 Seat Shock Absorber w/ Spring & Bushing Fits: WD SN: 127007 & up, WD45, WD45 diesel, Replaces: 70226042 (shock), 70226044 (spring)(Center-to-center compressed = 8-1/8", Fully extended = 11-3/4")

ACS219 $99.80 Seat Shock Absorber w/ Spring & Bushings Fits: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, Replaces: 70227916 (shock),70227917 (spring)(Center-to-center compressed = 8-1/8", Fully extended = 11-3/4")

Seat shock absorbers cont...Order # Price Description / Application

IHS325 $2.05EACH

Rubber Seat Bushing only(For Horizontal bolt hole) Fits: Allis Chalmers Seat Shock AbsorbersReplaces: 70222488 NOTE: 2 used per horizontal bolt; Sold individually.

Monroe® easy ride seat partsFits: B, C, CA, RC, U, WC, WF


IHS329 $32.50Rear-Mounted Seat Shock Absorber w/ Bushings (Center-to-center compressed = 11-1/2", Fully extended = 18-1/8)USA made

IHS347 $39.95 Mid Mounted Seat Shock Absorber w/ Bushings(Center-to-center compressed = 7-1/4", Fully extended = 9-1/8)NOTE: Horizontal bolt holes at each end.

ABC526 $9.65 Seat Shock BoltServiceable for WD, WD45(7/16" NC thread, .625" shoulder, 2.380" o/a length) USA made

IHS030 $27.95

Seat Spring Coil

IHS584 $19.95Seat Pivot Support Rod(3-1/2" w/ (2) flat washer, (2) rubber bushings & (2) #5 bolts)NOTE: Exact of original.

FendersSame gauge, weight & material as original equipment.

Fit to tractor before painting.


ACS093L(LH)

$97.50

Fits: Early B; Serviceable for Late B, C, CA ACS093L Replaces: 70225234ACS093R Replaces: 70225236NOTE: Not restoration quality, more rounded then original fenders. To fit Late B, C & CA customer will need to grind off brackets.

ACS093R(RH)

$97.50

Chas

sis

part

s

http://www.steinertractor.com/MIS006BK















http://www.steinertractor.com/ACS093R


Allis

Chalmers

Fenders cont...Order # Price Application

ACS095L(LH)

$175.00

Fits: RC; Styled WC (1940 & up)ACS095L Replaces: 70208206ACS095R Replaces: 70208207NOTE: Includes mounting brackets. Not restoration quality.

ACS095R(RH)

$175.00

ACS097L(LH)

$150.25

Fits: WD, WD45ACS097L Replaces: 70224935ACS097R Replaces: 70224934NOTE: Not restoration quality.

ACS097R(RH)

$150.25

ACS126L(LH)

$225.00

Fits: D17, D19ACS126L Replaces: 70237344ACS126R Replaces: 70237342NOTE: Not restoration quality.

ACS126R(RH)

$225.00

Shroud assemblies (toolbox) - USA madeOrder # Price Application

ACS201 $124.95

Fits: B, C w/ Hand StartReplaces: 70213325

ACS200 $124.95

Fits: B, C, CA w/ Gemmer SteeringReplaces: 70225244

Shroud assemblies (toolbox) cont...Order # Price Application

ACS190 $124.95

Fits: B, C w/ Ross SteeringReplaces: 219919

ToolboxesOrder # Price Application

ACS148 $49.95

Fits: RC, (WC SN: 74330 & up),WF SN: 1904 & up, Replaces: 70208446(11" long, 3-5/8" high, 5-3/8" wide)NOTE: Persian orange #1 powder coat.

ACS090 $49.95Fits: D10, D12 (both up to SN: 9001), D14, D15, D17, WD, WD45Replaces: 70228924(15" long, 6-3/16" high, 4" wide)NOTE: Persian orange #1 powder coat.

ACS144 $54.95Fits: D17, D19, 170, 175, 180, 185, 190, 190XT, 200, 210, 220Replaces: 70249750(21-3/8" long, 6-1/4" high, 4" wide)NOTE: Persian orange #1 powder coat.

ABC308 $37.95

Fits: Allis Chalmers models(11" long, 4" wide, 4-1/2" tall, Bolt holes center to center = 5-1/2")

ABC472 $32.50

Fits: Allis Chalmers models(4" wide x 16" long x 4-1/4" tall)

Hand clutch leverFits: CAReplaces: 70206456 (knob), 70225582 (lever), 912195 (bolt) (Primed)USA made


Final Drive Hand Clutch Lever ..........................ACS325 .............$84.95w/ Knob & Bolt

Chassis parts


















Alli

sCh

alm

ers

Chas

sis

part

sBrake parts cont...


ACS252 $14.95 Brake Shoe Lining Set w/ Rivets Fits: D17 up to SN: 42000, WD, WD45, WD45D, Replaces: 70231633(2" wide x 6-1/2" long) NOTE: For 1 side, no returns on broken shoes.

ACS2678 $49.00 NEW! Brake & Clutch Pedal Shaft Fits: WD, WD45, WD45 dieselReplaces: 70222650(0.996" O.D, 17 1/4" length) USA madeNOTE: Bare finish.

ABC164 $18.50 Brake Shoe Lining Set w/ Rivets Fits: D17 SN: 42001 & up, D19, D21, 170, 175, 180, 185, 190(1-1/4" wide x 7-1/4" long)NOTE: For 1 side, no returns on broken shoes.

MIS1131 $33.95 Brake Riveting Tool(1-1/4" throat, 1/8" dia. rivet punch) NOTE: Use to rivet brake linings to existing shoe or band. Includes a tool to drive out old rivets, a tool to drill & countersink linings, a tool to peen the new rivet & instructions. Mounts into vice. Not for use w/ deep recess shoes. Use for ABC017, ACS251 shoes.

MIS2547 $89.95 Riveting Tool (For brake shoe & disc relining for most tractors) (3-3/8" deep throat x 2-1/8" high throat) USA madeNOTE: Includes 2 punches. Use for ABC164, ACS252, ACS332 shoes.

ACS300 $24.90 Brake Rod Return Spring Fits: G, Replaces: 70800013(9-9/16" o/a length)USA made NOTE: 2 used per tractor; Sold individually.

ACS298 $14.95 Brake Shoe Return Spring Fits: G, Replaces: 70800403(2-3/16" o/a length)USA made NOTE: 4 used per tractor; Sold individually.

ACS271 $12.50 Brake Shoe Return Spring Fits: B, C, CA, Replaces: 70207320(3-1/2" o/a length)NOTE: 2 used per tractor; Sold individually.

ACS2103 $14.75 Brake Band Return Spring Fits: RC, WC, WF, W Speed patrolReplaces: U2649, 70202649(0.747" body O.D., 0.110" wire dia., 3.155" o/a length)USA made NOTE: 2 used per tractor; Sold individually

Brake partsOrder # Price Description / Application

ACS091 $68.95Brake Drum Fits: B, C, left side of CAReplaces: 70205527NOTE: New & improved ductile iron.

ACS1995 $77.85 Brake Drum Fits: D17 up to SN: 42000, WD, WD45, WD45D, Replaces: 70232585(1-1/2" bore w/ keyway, 2.860" wide, 7.875" O.D.) NOTE: New & improved ductile iron.

ACS007 $63.50Brake Drum Fits: G, D10, D12, D14, D15Replaces: 70239542, 70800668NOTE: Now made from ductile iron!

ACS2545 $59.95 Brake Pedal Shaft & Bushings Fits: G, Replaces: 70800000 (shaft)USA made

ACS332 $39.95NEW! Brake Lining (For Band Brake) Fits: WC, WF, RCReplaces: 70277526(For 1 wheel only)

ABC105 $48.50 Lined Brake Band (Hinged) Fits: B, IB, C, CAReplaces: 70216775NOTE: 1 band for 1 wheel only.

ACS1650 $10.65 Brake Pivot Pin Fits: B, C, CA, Replaces: 70207221(0.750" dia. x 1.625" long) USA madeNOTE: Zinc plated

ACS1652 $19.95 Brake Adjusting Screw Fits: B, C, CA, Replaces: 70213375(7/16"-20 NF x 3" long) USA madeNOTE: Zinc plated

ABC017 $14.50 Brake Shoe Lining Set w/ RivetsFits: B, IB, C, CA, Replaces: 70209864(Long shoe is 2" W x 7-3/8" L; Short shoe is 2" W x 6 3/8" L) NOTE: For 1 side, no returns on broken shoes.

ACS070 $108.50Riveted Brake Shoes, Pair Fits: D10, D12, D14, (D15 up to SN: 9001), G, Replaces: 70230872, 70800487NOTE: 1 pair for 1 wheel only.

ACS251 $23.45 Brake Shoe Lining Set w/ Rivets Fits: D10, D12, D14, (D15 up to SN: 9001), G, Replaces: 70230874, 70800412(1-3/4" wide x 8-1/8" long x .190" thick)NOTE: For 1 side, no returns on broken shoes.





















Allis

Chalmers

Brake parts cont...Order # Price Description / Application

ACS268 $13.95 Brake Rod Return Spring Fits: WD, WD45, Replaces: 70222670(6-5/8" o/a length)USA made NOTE: 2 used per tractor; Sold individually.

ACS283 $5.95 Front Brake Spring Fits: D17 up to SN: 42000, D19, WD, WD45, Replaces: 70232564(3.1354" o/a length, .595" O.D., .081" wire dia.) NOTE: Also used as a hydraulic oil control spring on D19 up to SN: 12850. 2 used per tractor; Sold individually.

ACS266 $9.95 Brake Shoe Return Spring (Rear) Fits: D17 up to SN: 42000, WD, WD45 Replaces: 70222501(3-1/4" o/a length)NOTE: 2 used per tractor; Sold individually.

ACS316 $14.50 Brake Shoe Return Spring Fits: D10, D12, D14, D15 Replaces: 70228253(2-3/8" o/a length)USA made NOTE: 4 used per tractor; Sold individually.

ACS321 $12.50 Brake Pedal Return Spring Fits: D10, D12, D14, D15Replaces: 70239262(4.590" o/a length)USA made NOTE: 2 used per tractor; Sold individually.

ACS1191 $19.95 Brake Anchor Shoe Pin Fits: D17 up to SN: 42000, WD, WD45Replaces: 70232801(0.752" O.D., 6-5/8" o/a length)USA made NOTE: 2 used per tractor; Sold individually.

ABC2713 $2.50 NEW! Disc Brake Ball fits: D17 SN: 75001 & up, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000Replaces: 70916538(1" dia. steel ball)NOTE: Sold individually.

Hydraulic oil filterFits: D10, D12, D17, D19 (All up to SN: 12020); 170, 175, 615 Replaces: 70251381(5-1/4" tall, 3.675" O.D.)USA made


Hydraulic Oil Filter ................................................ABC007 ............. $9.85NOTE: Spin on top.

Rear axle, partsOrder # Price Description / Application

ACS006 $194.95 Rear Axle Fits: G Replaces: 70800902(24-3/8" o/a length)

MFS1351 $12.95Rear Axle Outer Oil Seal Fits: GReplaces: 70800166(1.750" I.D., 2.690" O.D., .500" width)

ACS1314 $51.95Rear Axle Bearing Fits: GReplaces: 70800164, 70928929(1.5748" I.D., 2.6772" O.D., .591" width)

ACS1531 $13.95 Rear Outer Axle Oil Seal Fits: B, IB, C, CA, Replaces: 70206450(2.500" I.D., 3.548" O.D., .440" width)NOTE: 2 used per tractor; Sold individually.

ABC1628 $14.95Inner Axle SealFits: G, Replaces: 70800351(1.187" I.D., 2.004" O.D., .250" width)NOTE: 2 used per tractor; Sold individually.

ABC1628 $14.95 Inner Upper Final Drive Shaft Seal Fits: B, IB, C, CA, (D14 up to SN: 19001); Also fits D10, D12, (D14 up to SN: 19001), D15, ED40, I60, I500, I600 as a differential carrier seal, Replaces: 70230851, 70232186, 70261958, 70800351 (1.187" I.D., 2.004" O.D., .250" width) NOTE: 2 used per tractor; Sold individually.

ACS2105 $51.50Rear Axle Hub Rubber Oil Seal Fits: RC, WC, WF, W Speed patrolReplaces: U2533, 70202533, 79016729(0.795" wide, 9.975" O.D., 8.550" I.D.)USA made NOTE: 2 used per tractor; Sold individually

ACS1529 $18.95Outer Upper Final Drive Shaft Seal Fits: B, IB, C, CA, ED40, Replaces: 70206449(1.375" I.D., 2.720" O.D., .468" width)NOTE: 2 used per tractor; Sold individually.

ACS1525 $14.50 Final Drive Pan Gasket Fits: B, C, CA, D10, D12, D14, D15, ED40, I60, I500, I600, Replaces: 70233186USA made NOTE: 2 used per tractor; Sold individually.

Rear axle, parts continue on next page

Chassis parts











http://www.steinertractor.com/MFS1351









Alli

sCh

alm

ers

Chas

sis

part

sPTO parts cont...


IHS1545 $17.85NEW! Belt Pulley Shaft Oil SealFits: B, C, CA, IB, Replaces: 70225450(2.506" O.D., 1.375" I.D., .372" wide)USA madeNOTE: Narrower than original.

ABC2039 $7.95

Oil Seal fits: Some B, C, CA, D10 - D19, H3 - I600, 170 - 7000 (All w/ 1-3/8" single speed PTO assy), Replaces: 70241779(2.130" O.D, 1.375" I.D., .437" wide)

ABC1543 $13.95EACH Seal fits: RC, WC, WF

Replaces: 70244961(1.375" I.D., 2.378" O.D., .312" width)USA made

ABC1543 Applications:

PTO Output Shaft Retainer Seal fits: RC, WC, WF NOTE: 2 used per tractor, Sold individually.

PTO Gearbox Stub Shaft Seal fits: WC, WF up to 1935 NOTE: 2 used per tractor; Sold individually.

Belt Pulley Drive Seal fits: WC up to SN: 74330, WF up to SN: 1336

Front wheel boltFits: B, C, CA, D10, D12, D14, D15, D17, D19, D21, RC, WC, WD, WD45, 160, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, I-40, I-400, I-60, I-600Replaces: 70207503, 70256906(1/2" - 20 NF, 7/8" thread length, 13/16" hex head) USA made


Front Wheel Lug Bolt ...........................................ABC399 .............. $2.00NOTE: 5 to 6 used per rim; Sold individually.

Wheel clamp lock nut(For Axle Shaft & Front Wheel) Fits: B thru 7000 (All w/ regular axle except D21, 210, 220)(3/4"-16 UNF thread)


Front Wheel Clamp Lock Nut ............................ABC254 .............. $19.50NOTE: No re-threading necessary on worn shafts. Check size before ordering.

Rear axle, parts cont...Order # Price Description / Application

ACS2612 $14.50 Final Drive Pan Gasket (OEM) Fits: WC, WD, WD45, D17Replaces: 247874, 70247874USA made

ABC1543 $13.95 Outer Differential Shaft Oil Seal Fits: D10, D12, D14, D15; Industrials: 500, 510, 512, 600, 610, 612, 614, 615, 621, I60, I600, Replaces: 70244961(1.375" I.D., 2.378" O.D., .312" width)USA made NOTE: 2 used per tractor; Sold individually.

Steps - USA madeOrder # Price Description / Application

ACS272 $68.50

Step (Aftermarket part) Fits: B, C(16-1/2" o/a length, 5" pad width)NOTE: Mounts to square bar by pedals.

ACS1977 $64.50

Step Assembly Fits: CA(16-1/2" o/a length, 5" pad width)NOTE: Mounts to left side of torque tube.

PTO partsOrder # Price Description / Application

ACS280 $68.50PTO Shield Fits: D14, D15, (D17 up to series IV)Replaces: 70228549USA madeNOTE: Powder coat Persian orange #1.

ABC221 $4.50 PTO Knob Fits: RC, WC, WD, WD45 Replaces: 70206456(3/8" - 24 NF)USA made

MIS118 $48.50PTO Over-Running Clutch (1-1/8 Female) Fits: Tractors up to 75 horsepowerReplaces: Hub City C670F(1-1/8" - 6 x 1-3/8", 6 spline)

MIS138 $48.50 PTO Over-Running Clutch (1-3/8" Female & Male) Fits: Tractors up to 75 horsepowerReplaces: Hub City C660F(1-3/8" - 6 x 1-3/8", 6 spline)















Allis

Chalmers

Front wheel sealsOrder # Price Description / Application

ACS1177 $17.95 Front Wheel Seal fits: B, C, CA, D10, D12 Replaces: 70207365 (2.563" O.D., 1.4735" I.D., 0.5868" tall) NOTE: Steel & felt. Improved design. This Steiner exclusive is the best fitting wheel seal in the aftermarket and is half the price of the OEM seal.

ACS2085 $12.95 Front Wheel Oil SealFits: G, Replaces: 70800445(0.388" wide, 2.047 O.D.)NOTE: 2 used per tractor; Sold individually; (this seal is .060 smaller in O.D. than the original, customers using this seal use RTV or FORM-A-GASKET on the outside of the seal to compensate for the difference).

ABC270 $4.95 Front Hub Seal fits: D10 SN: 3501 - 9000, D12 SN: 3001 - 9000, D14, D15 up to SN: 9000, D17 up to SN: 42000, RC, WC, WD, WD45, WF (All w/ felt front hub seals) Replaces: 70202104 (3.156" O.D., 2" I.D., .375" thick) USA madeNOTE: Felt.

Wheel bearing kits NOTE: 2 used per tractor; Sold individually.


ACS1789 $52.65 Front Wheel Bearing KitFits: B SN: B-101 & up, IB, C, CA, (D10 up to SN: 3501 & SN: 9001 & up), D12 up to SN: 3001 & SN: 9001 & upReplaces: 70228459 NOTE: 2 used per tractor; Sold individually. Seals sold separately, order ACS1177.

ACS1793 $58.05 Front Wheel Bearing Kit w/ SealFits the following w/ 5 bolt front hub: D10 SN: 3501 & up, D12 SN: 3001 & up, D10, D12 high clearance up to SN: 3501, D14 wide front only, D15 up to SN: 9001, D17 up to SN: 42001, RC, WC, WD, WD45 Replaces: 70228458 NOTE: 2 used per tractor; Sold individually.

What is back spacing?To determine back spacing lay your wheel flat on the ground with the back of the wheel facing up. Lay a straight edge across the wheel & measure the distance from the back side of the mounting surface to the straight edge. (I.E. The wheel pictured has a back spacing of 3-5/8").

Front wheels / rims To determine the width of Wheels / Rims: Measure the inside

(bead to bead) not outside to outside.


WHS023 $64.95

3" x 12" Front Wheel w/ Blank Center Fits: GReplaces: 70800047

ACS010 $66.953" x 15" Front Wheel (5 Lug) Fits: B, C, CA, D10, D12Replaces: 70231520(2-3/4" pilot, 2-5/8" bolt center to center)USA made

ACS009 $74.50 Front Wheel (5 Lug) Fits: (D10, D12 when equipped w/ 16" rim), D14, D15, Early D17, WC, WD, WD45, WF Replaces: 70232832 (4.25" x 16", 3-3/8" pilot, 3" bolt center to center) USA madeNOTE: Not recommended for tractors w/ loaders. We recommend new lug bolts & retorque lug bolts periodically.

IHS193 $60.954.25" x 16" Front Wheel (Blank Center) Fits: WFReplaces: 70206134(13.465" I.D.)USA made

WHS042 $65.606" x 15" Front Wheel (6 Lug) Fits: Allis Chalmers models(6" bolt circle, 4.625" pilot hole, 4-3/4" back spacing)USA made

WHS022 $71.50 Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Some Late D15, D17, D19, 160 thru 190XT, 6060, 6070Replaces: 70235086, 70248460(4.5" x 16", Pilot hole = 4.625", 6" bolt circle, 4" back spacing) USA madeNOTE: For 5:50 x 6:00 x 16" tires.

WHS043 $82.75 Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Some D17 SN: 75001 & up, D19, 160, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, I60, I600 & others using 6" x 16" 6 lug rim, Replaces: 70235727, 70237405 (6" x 16", Pilot hole = 4.625", 6" bolt circle, 4-3/4" back spacing)USA made

WHS070 $86.45 Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Some 160 thru 7000 series (All w/ 8" x 15" 6 lug rim) Replaces: 70255499 (8" x 15", 6" bolt circle, 4.625" pilot, 4-3/4" back spacing)USA made

Chassis parts







http://www.steinertractor.com/WHS023









Alli

sCh

alm

ers

Chas

sis

part

sTires, tubesNOTE: Tubes are for BIAS ply

tires only, not for radial

tires. Also not for recreational

use. Need a tire or tube not listed?

Call technical service.

Order # Price Description / Size

WHS057 $52.15 Triple rib, Tire only fits: G(4.00 x 12")

WHS051 $16.45 Tube only (For 4.00 x 12" & 4.80 x 12" Tire) fits: G

WHS052 $83.75 Triple rib, 6 ply Tire only For 3" x 15" Wheel (5.00 x 15")

WHS053 $14.80EACH

Tube only(For 4.00, 5.00, 5.50 x 15" Tires)

WHS047 $91.95 Triple rib, 6 ply Tire only(5.50 x 16")

WHS048 $105.75 Triple rib, 4 ply Tire only(6.00 x 16")

WHS049 $110.95 Triple rib, 6 ply, Tire only(6.50 x 16")

WHS050 $15.25EACH

Tube only(For 5.50, 6.00, 6.50 x 16" Tires)

WHS060 $37.95EACH

Rear Tube only (For 7.50, 8.3, 9.5 x 24" Tires)

WHS059 $53.75EACH

Rear Tube only (For 11.2, 12.4 x 24" Tires)

WHS058 $56.55EACH


WHS061 $80.25EACH


WHS062 $56.95EACH

Rear Tube only(For 9.5 x 32" Tires)

WHS063 $64.95EACH

Rear Tube only (For 11.2, 12.4 x 34" & 36" Tires)

WHS064 $65.25EACH


WHS2513 $89.95EACH

Rear Tube only (For 12.00 x 38", 13.00 x 38", 13.6 x 38", 14.00 x 38", 14.9 x 38", 15.5 x 38" tires)

Rear rim bolts, partOrder # Price Description / Application

ABC399 $2.00 Rear Wheel Lug Bolt Fits: G, Replaces: 70207503 & 70256906(1/2" - 20 NF, 7/8" thread length, 13/16" hex head) USA made NOTE: 5 used per rim; Sold individually.

MIS061 $3.65 Rear Rim Bolt Assembly w/ Nut & Washer Fits: RC, WC, Early WD w/ 28" Rear Rim (3-1/2" NC hex head bolt w/ washer)NOTE: 6 used per rim; Sold individually.

Rear rim bolts, part cont...Order # Price Description / Application

MIS063 $3.75EACH

Rear Rim Bolt Assembly w/ Nut Fits: RC, WC, Early WD w/ 28" Rear Rim(5/8 x 18 x 2-1/2" NF Carriage bolt)USA madeNOTE: 6 used per rim; Sold individually.

MIS121 $0.50EACH Flat Washer (For MIS063)

(5/8" I.D.)

ABC397 $2.75EACH

Rear Rim Lug Bolt Fits: D10, D12, D14, D15, D17, WD, WD45, 170, 175, 180, 185, I-40, I-400, I-60, I-600(All w/ stamped steel dish)Replaces: 70225191, 70251815(9/16" x 18 NF, 1-1/8" thread length, 7/8" hex head) USA made NOTE: Sold individually. Can also work for front on some applications.

Rear rim / wheel clamps, partFits: B SN: 58401 & up, IB, CACS276 Replaces: 70210215ACS274 Replaces: 70210216ACS281 Replaces: 70210218


Clamp (Plain Style) ...............................................ACS276 .............$24.85

Clamp (Eccentric Style) ........................................ACS274 .............$24.85

Eccentric Bolt ..........................................................ACS281 ..............$14.45NOTE: 4 used per tractor; Sold individually.

Rear tire inner tube valves, nutNOTE: Sold individually.


ABC531 $5.15EACH Rear Tire Inner Tube Valve

(Air / Water Valve) (New Style) Fits: Tractor tubes w/ Internal threads

ABC384 $5.15EACH Rear Tire Inner Tube Valve

(Air / Water Valve) (Old Style) Fits: Tractor tubes w/ External threads

ABC385 $1.50EACH

Brass Nut (For Rear Tire Inner Tube Valve)

ACS276

ACS274

ACS281




























Allis

Chalmers

Rear rims / wheels - USA madeTo determine the width of Rims / Wheels: Measure the inside

(bead to bead) not outside to outside.


WHS030 $250.75Rear Rim (4 Dimple, 2 Blocks) Fits: B, IB, C Replaces: 70211201(8" x 24)NOTE: Like original

WHS031 $250.75Rear Rim (4 Dimple, 2 Blocks) Fits: B, IB, CReplaces: 70212169(10" x 24)NOTE: Like original.

WHS026 $250.95 Rear Rim (6 Dimple, 2 Blocks) Fits: RC, WC SN: 81757 & up, Early WD, WF SN: 1904 & upReplaces: 70209464(10" x 28)NOTE: Like original

WHS016 $148.05Rear Rim (6 Loops) Fits: Some ED40, RC, WC, Early WD w/ 9" x 28" 6 loop rim(9" x 28")

WHS004 $155.00Rear Rim (6 Loops) Fits: Some ED40, RC, WC, Early WD w/ 10" x 28" 6 loop rimReplaces: 721299(10" x 28")

WHS1613 $235.95 Flat Base Rear Rim (Blank Center) (For Stamped Steel 9 Bolt Pattern Rims) Fits: Allis Chalmers models(10" x 38") NOTE: Bare finish. Customer must reuse old center. Must weld or rivet.

WHS024 $305.20 Rear Rim (Double Bevel) Fits: Some D21, 190, 190XT, 200, 7000, others w/ 14" x 38" double bevel rimReplaces: 70235523(14" x 38")NOTE: Has 18 drive lugs.

Front wheel weights, partsOrder # Price Description / Application

MHS037 $90.00Front Wheel Weight Serviceable for B, C, CA & All 3" x 15" (5 Hole) rimsNOTE: Sold indvidually.

Front wheel weights, parts cont...Order # Price Description / Application

MHS038 $3.50

J-Hook (For MHS037 Weight)NOTE: 4 J-Hooks required per weight; Sold individually.

Rear spinout rims, partsNOTE: Stop holes are angled.


ACS027 $420.00 Fits: Some CA, D10, D12Replaces: 70225184(10" x 24")USA made

WHS007 $420.75 Fits: D14, D15Replaces: 70228211, 70232580(12" x 26")USA made

ACS028 $420.00 Fits: Some D14, D15, WD, WD45, etc., Replaces: 70220011(11" x 28")USA made

ACS026 $435.00 Fits: Some WD, WD45, 160, othersReplaces: 70226270(12" x 28")USA made

WHS008 $450.50 Fits: D17, Some WD45, 170, 5040, 5045, 5050, 6140, othersReplaces: 70237573(13" x 28") USA madeNOTE: Rails are drilled for both style stops (1 rail for MIS109 & 1 rail for MIS108).

MIS109 $14.95 Rear Spinout Rim Stop(For Parallel Drilled Rim Rail) Fits: Allis Chalmers modelReplaces: 70219456NOTE: Use MIS109 for the listed spinout rims.

MIS108 $16.50 Rear Spinout Rim Stop (For 90° Drilled Rim Rail) Fits: Allis Chalmers modelReplaces: 70232274, 70230832 USA madeNOTE: Will not fit the rims that we sell.

MIS110 $8.95 Stop Bolt (For Rear Spinout Rim Stops)Fits: Allis Chalmers modelsReplaces: 70218662, 70225190, 72073627 USA madeNOTE: Sold individually.

Chassis parts




















Alli

sCh

alm

ers

Chas

sis

part

sFront weights, partsOrder # Price Description / Application

ACS180 $158.50 Front Weight fits: D15, D17, D19, RC, WC, WD, WD45 gas, LP, WF, Replaces: 70227272, Casting #AM4162-3NOTE: Will not fit WD45 diesel.

ACS234 $36.952-Piece Anchor Kit (For ACS180 Weight) Fits: RC, WC, WD, WD45 gas, LP only, WFReplaces: 70227273 (LH), 70227274 (RH) NOTE: Kit contains LH / RH.

ACS238 $175.00 3-Piece Weight Bracket Kit(For ACS180 Weight) Fits: D15, D17, D19Replaces: 70239528 (LH), 70239529 (RH), 70236049 (front) USA made

ACS241 $16.50 Anchor Rod fits: RC, WC, WD, (Correct for WD45 gas, LP only, WF, Replaces: 70227275 (7-3/4" o/a length)NOTE: Holds up to (3) ACS180 weights.

ACS239 $18.95 Anchor Rod fits: D15; Correct for D17, D19Replaces: 70236047(9-1/4" o/a length)NOTE: Holds up to (4) ACS180 weights.

3-point top link pins, partsOrder # Price Description / Application

ABC1431 $1.90 Category 1 3-Point Top Link Pin Fits: Allis Chalmers models(3/4" O.D., 2-3/4" usable length, 4-5/8" o/a length)

ABC1427 $3.25 Category 1 3-Point Top Link Pin Fits: Allis Chalmers models w/ a Category 1, 3-point hitch (3/4" O.D., 4-3/4" usable length, 6-1/2" o/a length)

ABC1429 $4.25 Category 2 3-Point Top Link Pin Fits: Allis Chalmers models w/ a Category 2 (3-point hitch) (1" O.D., 4-1/4" usable length, 6" o/a length)

MIS119 $0.35 3-Point Lynch Pin Fits: Allis Chalmers models equipped w/ a 3-point hitch using a .420" dia. pinReplaces: 70244066(1-5/8" usable length)

FDS023 $23.50 Top-Link Category 1 Adjustable w/ forged ends & 3/4" hole Fits: Allis Chalmers models(16" tube length)

FDS346 $39.45Top-Link Category 2 Adjustable w/ forged ends & 1" hole Fits: Allis Chalmers models(16-3/4" tube length)

Drawbars, partsOrder # Price Description / Application

ACS347 $24.95Snap Coupler Repair Kit (13 pcs) Fits: D10, D12, D14, D15, D17, D19, WD, WD45, 190, 190XTNOTE: 2 kits used per tractor; Sold individually. See website for contents.

ACS269 $6.95 Snap Coupler Spring Fits: D10, D12, D14, D15, D17, D19, WD, WD45, 190, 190XT, Replaces: 70235881 & 327360 (3-1/4" o/a length)NOTE: 4 used per tractor; Sold individually.

ABC2010 $24.00 Adjustable Stabilizer Bar (For tractors w/ Category I 3-point) Adjustable from 27-1/2" to 37" length, 23" center tube length, 7/8" threaded ends, 7/8" pin holes NOTE: Adjustable ends for desired length. Normally 2 used per tractor; Sold individually.

FDS022 $46.95 Standard Drawbar Category 1 Fits: D10 thru D15, 5015 thru 6040Replaces: 70234854(1" x 2-1/2" x 26", 7/8" pin size)

FDS211 $29.99

Drawbar Lock Category 1(For FDS022)

ABC1433 $2.153-Point Lift Arm Category 2 to a Category 1 3-Point Hitch Reducer Bushing Fits: Allis Chalmers models(1-1/8" O.D., 7/8" I.D., 1-3/8" o/a length)

ACS310 $64.95Drawbar fits: G (Exact for up to SN: 26750) (Will work on SN: 26751 & up) Replaces: 70800455(21-3/16" drawbar length)USA made

ACS356 $132.95Drawbar Guide Assembly Fits: WD, WD45Replaces: 70226522USA made

ACS261 $284.50 Drawbar Yoke Assembly Fits: D14, D15, D17 (series I, series II and also series III w/ snap coupler hitch)Replaces: 70232074, 70232073, 70231146, 70224650 USA madeNOTE: Can be used for heavy duty applications for D14 & D15.






















Allis

Chalmers

3-point conversions, parts - USA madeOrder # Price Description / Application

ACS015 $548.50 NEW! 3-Point Hitch Conversion KitFits: B, C (Category 1)NOTE: Complete w/ hydraulic cylinder, shortened adjustable top link & bracket. Tractor must have hydraulics to use this conversion. Bolts onto drawbar.

ACS011 $420.00 NEW! 3-Point Hitch Conversion KitFits: D14, D15, WD, WD45 (Category 1) NOTE: Snap coupler drawbar must be removed to install, Top link & top link bracket not included.

ACS016 $34.75NEW! Top Link Bracket Fits: CA, WD, WD45 NOTE: Bolts around rockshaft. 7/8" diameter hole for Category 1 toplink.

ACS017 $60.00 NEW! Top Link Bracket Fits: D14, D15NOTE: 7/8" diameter hole for Category 1 toplink.

ACS013 $450.00 NEW! 3-Point Hitch Conversion KitFits: D17, D19, 190, 190XT (Category 2) NOTE: Snap coupler drawbar must be removed to install, Top link & top link bracket not included.

ACS018 $79.50 NEW! Top Link Bracket Fits: D17 (except series IV)NOTE: 7/8" diameter hole for Category 1 toplink.

ACS020 $85.00 NEW! Top Link BracketFits: D17 Series IV and 190, 190XT NOTE: Welded steel, not cast. 7/8" diameter holes for category 1 toplink.

Deluxe tractor umbrellasFour oil-tempered spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework for the cover. Frame constructed of tubular steel. All metal parts, including frame and mounting brackets, zinc plated for rust resistance and lasting appearance. 54" square cover is made of durable polyester material. Each corner is double reinforced and has heavy steel grommets. Complete with universal mounting bracket. Can be mounted on side of fender, rear end / axle housing, foot platform.


Orange Deluxe Umbrella w/ Brackets .............ABC2372 .......... $192.80

White Deluxe Umbrella w/ Brackets ................ABC2362 .......... $192.80

Tractor spinnerAwesome in size & realism, these yard /garden spinners share the exact detailing as the real thing! Made with fade resistant SolarMax® & SunTex

TM fabric each spinner withstands daily UV rays, rain & snow. Includes a heavy duty fiberglass pole & ground stake. Licensed.


Allis Chalmers Spinner ......................................MIS130............. $77.75(WD, WD45 style; 48" x 28", 18-1/2" dia.)

Mylar decals - USA made(Unless otherwise noted):

INSTRUCTIONS: Have the pitted area filled, sanded smooth & painted. Paint must be completely dry prior to installation (usually 3 - 4 weeks). Wash area with soap & water (new paint included) on which decal is to be placed.

FOR MYLAR DECAL (FILM BETWEEN LETTERING): Trim to border of design where possible prior to removing white backing paper. Lightly spray the area with window cleaner (do not use window cleaner in aerosol can). Peel white backing paper from decal and place in position. Squeegee window cleaner from under decal beginning in center and working outward. If air bubbles occur, puncture with pin & smooth down. Please note: These decals have been printed on a tough mylar film using mylar ink. A pressure sensitive adhesive has been employed on the back of the mylar to insure good adhesion to any clean, hard surface.

FOR VINYL CUT DECAL (NO FILM BETWEEN LETTERING) SPECIAL ORDER ONLY: Peel backing paper from decal. The decal will be stuck to the application paper. Align the decal using the design, not the application paper, and firmly press decal into place. Slowly remove the application paper starting at one corner. Please note: The colors are fused into the vinyl eliminating stacking. CAUTION: Inspect all decal pieces before applying to tractor. NO REFUNDS on mylar decals if applied to surface and/or if damaged. NO REFUNDS on vinyl cut decals. Store in a cool, dry place. Do not soak in water.

Allis did not use model symbol decals before 1951. The model

symbol decal drawings were made in June 1951 & included the

B, CA, WD. The decals had a clear background w/ black letters.


DEC465 $7.50 Allis Chalmers square (4-1/2" x 4-1/2)DEC051 $40.00 B (up to & including 1939) (Blue w/ Long

A & S)DEC288 $25.00 B (1939-44) (Black w/ Long A & S)

NOTE: Allis did not use model symbol decals before 1951. The model symbol decal drawings were made in June 1951 and included the B, CA, WD. The decals had a clear background, black letters.

Mylar decals continue on next page

Chassis parts / Miscellaneous

DEC288 DEC215 DEC055DEC465

ABC2372

ABC2362









http://www.steinertractor.com/DEC465




Alli

sCh

alm

ers

Mis

cella

neou

sMylar decals - USA made cont... (Unless otherwise noted):


DEC255 $25.00 B (1944 & up) (Black w/ Even letters)DEC052 $25.00 C (1944 & up), Replaces: 213322

(Black w/ Even letters)NOTE: Allis did not use model symbol decals before 1951. The model symbol decal drawings were made in June 1951 and included the B, CA, WD. The decals had a clear background, black letters.

DEC053 $25.00 CA, Replaces: 225338(Black) NOTE: Allis did not use model symbol decals before 1951. The model symbol decal drawings were made in June 1951 and included the B, CA, WD. The decals had a clear background, black letters.

DEC301 $48.00 D10 series I up to SN: 1950 (1959-60)Replaces: 234495

DEC302 $48.00 D12 series I up to SN: 1950 (1959-60 w/ black bar grille), Replaces: 234495

DEC354 $56.00 D14 up to SN: 18230 gas (1957-59)Replaces: 232596(Silver w/ black border; Oval model letter)

DEC214 $48.00 D14 series I SN: 19001 & up (1959 & up)Replaces: 233542(Black letter w/ black border)

DEC303 $48.00 D15 series I up to SN: 13000 (1960-62)Replaces: 233542

DEC356 $56.00 D17 gas up to SN: 24000 (1957-59) Replaces: 230280(Oval model letter)

DEC357 $60.00 D17 diesel up to SN: 24000Replaces: 230279 (Oval model letter)

DEC215 $48.00 D17 SN: 24001 to 31625 gas only (1959-60) (All w/ black bar grille), Replaces: 232600

DEC056 $25.00 GDEC433 $46.00 G (Vinyl cut)DEC049 $40.00 RC (Blue) NOTE: RC letters are NOT

included. Available by special order only.DEC047 $40.00 WC (1934-38) (Blue w/ Border)

NOTE: Serviceable for 1933 but blue letters instead of black, has long 'A' & 'S' letters. Allis did not use model symbol decals before 1951. The model symbol decal drawings were made in June 1951 and included the B, CA, WD. The decals had a clear background, black letters.

DEC048 $40.00 WC (1939-40) (Blue w/ Long A & S)DEC289 $40.00 WC (1941-48) (Black)DEC054 $25.00 WD (Black)DEC438 $80.00 WD (Black) Vinyl cut

Replaces: 226503DEC055 $44.00 WD45 (Black)

Mylar decals - USA made cont...Order # Price Application

DEC439 $80.00 WD45 (Black) Vinyl cutDEC383 $54.00 WD45 diesel (Black)DEC050 $40.00 WF (1937-40)

(Blue w/ long A & S & w/ Border)DEC254 $40.00 WF (after 1940) (Black w/ long A & S)

Data bookAllis Chalmers Farm Tractors & Crawlers Data Book by Terry Dean Put everything you need to know about Allis Chalmers tractors in your hip pocket! Beginning with the model 10-18, this book covers all major Allis Chalmers tractor and Crawler models produced up through 1963. Packed with specs, serial numbers, engine codes, dates of manufacture, decal placement, options and original prices. Ideal for auctions! (Sftbd., 4-1/2" x 7-1/2", 192 pgs., 60 b&w ill.)


Allis Chalmers Data Book ....................................BOK074 ............ $19.95

I & T Shop Service™ manuals - Printed in USAAn I & T Shop Service™ Manual tells you how to take a tractor

apart, how to fix it and how to put it back together again. These

are authentic manuals that deal with repairs in the language of

a mechanic with an easy to use format. They include valuable

information as to specifications, torques, etc. illustrated by

exploded views and photos. If you are in serious repairs or

restoration, you need an I & T Shop Service™ Manual. It will

offer many short cuts and save you time!


AC11 $31.95 B, C, CA, G, RC, WC, WD, WD45 diesel, WF

AC201 $34.95 Allis Chalmers Collection: D10, D10 series III, D12, D12 series III, D14, D15, D15 series II, D17, D17 series III & IV, 160, 170, 175NOTE: Includes electrical wiring diagrams.

AC202 $34.95 Allis Chalmers Collection: D19, D19 diesel, D21, D21 series II, Two-Ten, Two-Twenty, 180, 185, 190, 190 XT, 200, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080 NOTE: Includes electrical wiring diagrams for D19, D21, 180, 185, 190, 190XT, 200, 210, 220, 7000. Does not include electrical diagrams for 7010 thru 7080.

AC11 AC201 AC202






















DEC383



http://www.steinertractor.com/BOK074

http://www.steinertractor.com/AC11




Allis

Chalmers

Operator manual reprintsAn Operator’s Manual (reprints only) sometimes referred to as

the Owner’s Manual is the manual that came with the tractor. It

is the manual that was given to the ultimate consumer by the

manufacturer. It can be compared to the manual you receive

in the glove box of a new car. This manual gives the owner-

operator instructions, shift patterns, capacities (anti-freeze,

crankcase, etc.) and adjustment procedures (brakes, clutch, etc).

This is a very useful and valuable tool in operating your tractor.

Service manual reprintsA Service Manual Reprint with wiring diagrams tells you how

to take the tractor apart, how to fix it and how to put it back

together again. It is a reprint of the manual that the factory

furnished the dealer’s shop service department, and was not

sent or given to individual retail customers. It deals with repairs

in the language of a mechanic. Often times it includes valuable

information as to specifications, torques, etc. A service manual

reprint will offer many short cuts and save you time!


REP031 $15.50 B (Operator’s Manual)REP032 $15.50 C (Operator’s Manual)REP036 $19.95 B & C (Service Manual)

NOTE: Includes electrical wiring diagram.REP033 $15.50 CA (Operator’s Manual)

NOTE: Includes electrical wiring diagram.REP037 $19.00 CA (Service Manual)

NOTE: Includes electrical wiring diagram.REP094 $23.95 D14 (Service Manual)

NOTE: Includes electrical wiring diagram.REP034 $15.50 G (Operator’s Manual)

NOTE: Includes electrical wiring diagram.REP039 $19.50 G (Service Manual)

NOTE: Includes electrical wiring diagram.REP093 $24.95 G (Implement setup, maintenance & repair

manual)REP2967 $18.95 NEW! RC (Operator & Parts)

Replaces: TPL72REP035 $15.50 WC 1935 (Operator’s Manual)REP002 $15.50 WC 1939 (Operator’s Manual)REP038 $19.50 WC (Service Manual)

NOTE: Includes electrical wiring diagram.REP003 $15.50 WD (Operator’s Manual)

NOTE: Includes electrical wiring diagram.REP001 $15.50 WD45 (Operator’s Manual)

NOTE: Includes electrical wiring diagram.REP092 $18.95 WD & WD45 (Service Manual)

NOTE: Includes electrical wiring diagram.

Operator, Service manual reprints cont...Order # Price Application

REP2643 $14.95 Char-Lynn Power Steering (Owner's manual) NOTE: Includes installation, operation, maintenance & trouble shooting information on the pump & torque generator.

Parts manual reprint - Printed in USAA Parts Manual (reprint only) has exploded views of all parts

on the tractor. With numbered pictures giving you great detail

on assembly and disassembly. It also gives you a guide, with

numbers, for ordering parts, and makes you seem much more

informed when talking with a dealer. Many service manuals,

after telling you how to disassemble & repair in detail, will

simply say "reassemble". If you have your PTO in the wash tank,

in pieces, without notes, you have a problem. The parts manual

can help you out with an exploded view of the PTO unit, and

you can see immediately how it all goes back together. You

need a parts manual!


REP1734 $49.95 B, CREP1815 $47.95 CAREP1813 $50.95 D14 up to SN: 19000REP1817 $34.95 GREP1737 $47.95 WC, WFREP1739 $50.95 WD, WD45 gas, LP, diesel

Engine rebuild videosUSA madeShows how to completely rebuild the tractors' engine. You will see the engine disassembled down to the bare block & then rebuilt step by step is an easy format

Tune-up videos - USA madeIncludes rebuilding the carburetor & distributor, oil & filter change, brake

adjustment & more!

VHS videos are on CLOSE OUT

D = DVD


VID13 $18.00 WC, WD, WD45, WF, WI, WS(Engine Rebuild DVD)VID13D $20.00

VID14D $20.00 WC, WD, WD45, WF, WI, WS(Tune-Up DVD)

Miscellaneous

REP031 REP033 REP034 REP035

REP1734 REP1813 REP1817 REP1739


http://www.steinertractor.com/REP031



















REP1813




http://www.steinertractor.com/VID13

http://www.steinertractor.com/VID13D

http://www.steinertractor.com/VID14D

Allis Chalmers - Steiner Tractor · · 2014-12-05Allis Chalmers farm tractors were in production...

Documents

Transcript of Allis Chalmers - Steiner Tractor · · 2014-12-05Allis Chalmers farm tractors were in production...