Allied Solutions India - polyethylene compoundt. +39 0575 772458 - f. +39 0575 772459...
Transcript of Allied Solutions India - polyethylene compoundt. +39 0575 772458 - f. +39 0575 772459...
polyethylene compound
09.2014
2
Pebo is part of System Group, a group of companies founded in 1979.Today, with its 13 production sites, employing more than 600 people, it is a leading manufacturer of complete and innovative polyethylene and polypropylene pipeline systems exported worldwide.
Pebo was established in 1987 in Tuscany, having from the very beginning the scope of producing an ever higher quality compound, from recycled plastic waste.
The Company sits on a 15.000 m² sites, employs more than 30 people to run:- Advanced compounding lines- Shredding, grinding and washing lines- A high-tech laboratory- Administration
Thanks to our avant-garde laboratory, we are able to select and guarantee high quality compounds for extrusion, injec-tion and blow moulding.
Experience, reliability and quality make the success of our company.
ourcompany
3
1. Sampling 2. Incoming material tests 3. Blending
6. Packing and stocking of resin4. Extrusion of granules 5. Quality tests
our productionThe raw materials used for the production of our compounds have the following origin:Industrial plastic wasteRecycled post-consumer Off-spec. virgin polyethylene resinChemical additives
The production cycle consist of six main stages: silos
mixer
certificate of
quality
additives
extruder
We give a new life to plastic.
4
KArl FiSher coulometer DSc DiFFerentiAl ScAnning cAlorimetry
ourquality
The Lab is at the heart of Pebo success.Tests are carried out on various plastic materials using sophisticated technology to approve incoming raw materials and guarantee the quality throughout the production cycle up to dispatch.A fine selection of raw materials and an accurate blen-ding prior to extrusion are the secret of Pebo quality focused at supplying our customers with high perfor-ming compound.
5
Ftir Spectrometer moDulAr melt Flow inDex teSter tgA thermogrAvimetric AnAlySiS
testing labm.F.i.Method ISO 1133Unit g/10min
DenSity(g/cm3)
D.S.c. (min)
o.i.t. (min)
umiDity(ppm)
tgACarbon black content (%)Inorganic fillers (%)
Fitr
Certifies the fluidity of the material
Certifies the density of the material. The product can then be classified as either high or low density.
Used to identify any contamination of other materials: for example if there is any polypropylene content.
Resistance to oxidation aging.
To check for the presence of water.
To check for the percentage of carbon black content and for the presence of inorganic fillers.
To identify the type of plastic.
type oF teSt Scope
6
ourcompound
Know-how from a 25 year experience.
UNI EN ISO 9001:2008 n. 841 UNI EN ISO 14001:2004 n. 183 Product certification
All our high density and low density polyethylene compounds are produced by the latest PEBO technologies:- twin screw extruders- high precision gravimetric dosing systems- Advanced filtration technology
7
m.F.i. (5 Kg/190°C) - Method ISO 1133 Unit g/10min
DenSityMethod ISO 1183 - Unit g/cm3
o.i.t. 200°cMethod EN 728 - Unit min
umiDityMethod - Unit ppm
cArbon blAcKMethod ISO 6964 - Unit %
m.F.i. (5 Kg/190°C) - Method ISO 1133 Unit g/10min
DenSityMethod ISO 1183 - Unit g/cm3
o.i.t. 200°cMethod EN 728 - Unit min
umiDityMethod - Unit ppm
cArbon blAcKMethod ISO 6964 - Unit %
typicAl property
typicAl property
0.40 - 0.70 0.40 - 0.70
0.955 - 0965 0.955 - 0965
2.00 - 2.50 2.00 - 2.50
> 20 > 20
< 600 < 600
SpeciFicAtion rAngeS
SpeciFicAtion rAngeS
ApplicAtion: ExtrusionInjection moulding
ApplicAtion: ExtrusionInjection moulding
top clASS high DenSity polyethylene compounD
· Carbon black gives outstanding UV resistance· Antioxidants and processing stabilizers are added, for good oxidation resistance and high mechanical properties.· Polypropylene completely free compound
top clASS high DenSity polyethylene compounD
· Carbon black gives outstanding UV resistance· Antioxidants and processing stabilizers are added, for good oxidation resistance and high mechanical properties.
HDPE 80100
HDPE 80070
color: color:
Pebo SpaLoc. Piego - Fraz. Monterone - 52038 Sestino (AR) - ITALYT. +39 0575 772458 - [email protected] - www.pebospa.comUNI EN ISO 9001:2008 n. 841 UNI EN ISO 14001:2004 n. 183
Black Black
8
m.F.i. (5 Kg/190°C) - Method ISO 1133 Unit g/10min
DenSityMethod ISO 1183 - Unit g/cm3
o.i.t. 200°cMethod EN 728 - Unit min
umiDityMethod - Unit ppm
cArbon blAcKMethod ISO 6964 - Unit %
m.F.i. (5 Kg/190°C) - Method ISO 1133 Unit g/10min
DenSityMethod ISO 1183 - Unit g/cm3
o.i.t. 200°cMethod EN 728 - Unit min
umiDityMethod - Unit ppm
cArbon blAcKMethod ISO 6964 - Unit %
typicAl property
typicAl property
0.35 - 0.75 0.35 - 0.75
0.952 - 0965 0.952 - 0965
2.00 - 2.50
> 20
2.00 - 2.50
-
< 600 < 600
SpeciFicAtion rAngeS
SpeciFicAtion rAngeS
ApplicAtion: Extrusion
ApplicAtion: Extrusion
premium high DenSity polyethylene compounD
· Carbon black gives outstanding UV resistance· Antioxidants and processing stabilizers are added, for good oxidation resistance and high mechanical properties.
SelecteD high DenSity polyethylene compounD
· Carbon black gives outstanding UV resistance
HDPE 8330plus
HDPE 8330
color: color:
Pebo SpaLoc. Piego - Fraz. Monterone - 52038 Sestino (AR) - ITALYT. +39 0575 772458 - [email protected] - www.pebospa.comUNI EN ISO 9001:2008 n. 841 UNI EN ISO 14001:2004 n. 183
Black Black
9
Red
Lime
Blue Dark grey
Light grey Yellow
m.F.i. (2,16 Kg/190°C) - Method ISO 1133 Unit g/10min
DenSityMethod ISO 1183 - Unit g/cm3
umiDityMethod - Unit ppm
cArbon blAcKMethod ISO 6964 - Unit %
m.F.i. (2,16 Kg/190°C) - Method ISO 1133 Unit g/10min
DenSityMethod ISO 1183 - Unit g/cm3
umiDityMethod - Unit ppm
typicAl property
typicAl property
0.20 - 0.45 0.20 - 0.45
0.955 - 0972 0.955 - 0968
2.00 - 3.00
< 600 < 600
SpeciFicAtion rAngeS
SpeciFicAtion rAngeS
ApplicAtion: Extrusion (thin-wall pipes)Injection mouldingBlow moulding
ApplicAtion: Extrusion (thin-wall pipes)Injection mouldingBlow moulding
premium high DenSity polyethylene compounD
· Ultra fine filtration grade· Carbon black gives outstanding UV resistance
premium high DenSity polyethylene compounD
· Ultra fine filtration grade· Calcium Carbonate is filled on demand
color:
HDPE 6100
HDPE 6100coloured
color:Black
Pebo SpaLoc. Piego - Fraz. Monterone - 52038 Sestino (AR) - ITALYT. +39 0575 772458 - [email protected] - www.pebospa.comUNI EN ISO 9001:2008 n. 841 UNI EN ISO 14001:2004 n. 183
10
typicAl property
typicAl property
0.20 - 0.45 0.20 - 0.45
0.922 - 0940 0.922 - 0940
2.00 - 2.50 2.00 - 2.50
< 600 < 600
SpeciFicAtion rAngeS
SpeciFicAtion rAngeS
ApplicAtion: Extrusion
ApplicAtion: Extrusion
premium low DenSity polyethylene compounD
· Carbon black gives outstanding UV resistance· LLDPE material is added to the compound
SelecteD low DenSitypolyethylene compounD
· Carbon black gives outstanding UV resistance
LDPE 1410S
LDPE 1410
color: color:Black Black
m.F.i. (2,16 Kg/190°C) - Method ISO 1133 Unit g/10min
DenSityMethod ISO 1183 - Unit g/cm3
umiDityMethod - Unit ppm
cArbon blAcKMethod ISO 6964 - Unit %
m.F.i. (2,16 Kg/190°C) - Method ISO 1133 Unit g/10min
DenSityMethod ISO 1183 - Unit g/cm3
umiDityMethod - Unit ppm
cArbon blAcKMethod ISO 6964 - Unit %
Pebo SpaLoc. Piego - Fraz. Monterone - 52038 Sestino (AR) - ITALYT. +39 0575 772458 - [email protected] - www.pebospa.comUNI EN ISO 9001:2008 n. 841 UNI EN ISO 14001:2004 n. 183
11
Pebo develops and produces HDPE, MDPE and LDPE polyethylene compounds upon customer request.
Starting from the evaluation of the customer requirement, our technical team is able to study the correct formulation for the desired application, blending together:
- Virgin polyethylene resin- Off-spec polyethylene resin- Recycled materials - Master batches and additives- Mineral fillers
The acquired resin is tested in our labs and a pre-series is produced in order to allow the customer to check the performance of his end product.
Once approved, the compound is standardised in conformity to the specifications defined with the customer(density, mfi, filtration grade, colour, packaging …)
We have developed and we produce compounds on demand for various applications such as:
- Electric cable coating- Steel pipe coating- Pipe fittings - Tanks and reservoirs for flammable substances- Waterproof geo-textiles for dams- Roof tiles
We help our customers to add value on their products.
compoundon demand
Pebo SpaLocalitá Piego - Frazione Monterone
52038 Sestino (AR) - ITALYt. +39 0575 772458 - f. +39 0575 [email protected] - www.pebospa.com
Lab analysis are carried out on resin compound prior to dispatch and quality certificates are supplied with shipping documents.
Material delivery options Resin compound can be delivered in three options:25 kg bags on 110 × 130 cm pallets1000 -1200 kg Big Bags on 100 × 100 cm pallets25,000 kg bulk
- --