Allart Select Door Knobs · with the Door Levers & Door Knobs to be found in sections ST1 & ST2....
Transcript of Allart Select Door Knobs · with the Door Levers & Door Knobs to be found in sections ST1 & ST2....
7620 7620C with 7820C rosette
7625
Allart Select
7625B with 8700B plate
7625C with 7823C rosette
Door Knobs
ST2:005
Two traditional period Door Knobs - both available in three sizes - designed to work in conjunction with the Rosettes & Backplates to be found in sections ST3 & ST4.
Complementary Thumb Turns can be found in section ST7, and Cabinet Knobs in section CF1.
approx actual size C
approx actual size C
A B C
D (diameter) Ø 51 Ø 56 Ø 63
P (projection) 48* 52* 59*
FixingsSupplied with 8mm x 110mm stainless steel lockpoint spindle and M6 grubscrew (64mm max. door thickness); alternative spindle lengths and functions are available - see pages ST6:070 & 080.
Installation instructions supplied.
How to Order1) select KNOB (e.g. 7620)
2) add FINISH (e.g. 7620PC)
3) add SIZE (e.g. 7620PC/B)
For HALF SET (single knob) add /H (e.g. 7620PC/B/H).
For use with Baldwin 7.2mm spindles, diamond orientation, add BWN to code (e.g. 7620PC/B/BWN).
Backplates and Rosettes ordered separately - see sections ST3 and ST4.
Finishes - See our price list or website for finish availability.
* total projection: add 7mm for rosette, 6mm for backplate with flush collar & 10mm for plate with raised collar.
(* see below)
(* see below)
sectional view
sectional view
12/17
7620B with 6000B plate
solid Knob design,heavy spring Latch recommended
solid Knob design,heavy spring Latch recommended
D
P
D
P
Split Finish Sets - order as singles
7620 7625
7650 7651
7620 7625
7650 7651
7650B with 5900B plate
7650 7650C with 7841C rosette
7651
Allart Select
7651B with 5900B plate
7651C with 7827C rosette
Door Knobs
ST2:006
Two classic Door Knobs - both available in four sizes - designed to work in conjunction with the Rosettes & Backplates to be found in sections ST3 & ST4.
Complementary Thumb Turns can be found in section ST7, and Cabinet Knobs in section CF1.
approx actual size C
approx actual size C
FixingsSupplied with 8mm x 110mm stainless steel lockpoint spindle and M6 grubscrew (64mm max. door thickness); alternative spindle lengths and functions are available - see pages ST6:070 & 080.
Installation instructions supplied.
How to Order1) select KNOB (e.g. 7650)
2) add FINISH (e.g. 7650PC)
3) add SIZE (e.g. 7650PC/B)
For HALF SET (single knob) add /H (e.g. 7650PC/B/H).
For use with Baldwin 7.2mm spindles, diamond orientation, add BWN to code (e.g. 7650PC/B/BWN).
Backplates and Rosettes ordered separately - see sections ST3 and ST4.
Finishes - See our price list or website for finish availability.
* total projection: add 7mm for rosette, 6mm for backplate with flush collar & 10mm for plate with raised collar.
sectional view
sectional view
12/17
A B C D
D (diameter) Ø 48 Ø 54 Ø 64 Ø 75
P (projection) 44* 53* 59* 65*
(* see below)P
solid Knob design,heavy spring Latch recommended
solid Knob design,heavy spring Latch recommended
D
D
Split Finish Sets - order as singles
(* see below)P
7620 7625
7650 7651
7620 7625
7650 7651
Rosettes - Concealed fixAllart Select
ST3:050
Two traditional period designs of concealed fix Rosettes, both available in four sizes; and all designed to work in conjunction with the Door Levers & Door Knobs to be found in sections ST1 & ST2.
FixingsSupplied with subroses, no.4 x 13mm wood screws, alignment collars and installation instructions.
Fix Dead Rosettes are supplied with 7813 mounts in place of standard subroses (*).
Pair of Pre-Bore Rosettes (sizes C & D only) supplied with 7800 Pre-Bore Adapter in place of standard subroses (*).
(*) See pages ST6:070 & 080 for details.
How to Order1) select ROSETTE (e.g. 7820)
2) add FINISH (e.g. 7820PB)
3) add SIZE (7820PB/B).
For HALF SET (single rosette) add/H (e.g. 7820PB/B/H).
For pair of rosettes FIX DEAD add FDS (e.g. 7820PB/B/FDS).
For single rosette FIX DEAD add FD (e.g.7820PB/B/H/FD).
For PRE-BORE ADAPTOR (sizes C & D only) add PRE (e.g. 7820PB/C/PRE).
Finishes - See our price list or website for finish availability.
Split Finish Sets - order as singles
7813
7820 7823
A B C D
D (dia) Ø 44 Ø 54 Ø 64 Ø 76
Custom sizes available upon request - surcharge may apply.
PRE-BORE ADAPTOR AVAILABLE
SUBROSES &ALIGNMENT
COLLARS SUPPLIED
7800
FIX DEADDUMMYOPTION
7813 (shown fitted)
D
7 (D size = 9mm)
12/17
Finish matched dome nut
DF5:00512/17
Centre Door KnobsEntrance/Exterior Door Furniture
Four classic designs of Centre Door Knob, all CNC machined from blocks of solid brass to produce perfect detailing and proportion.
2599
2596 2597
2598
FixingsSupplied with anti-rotation pin, finish matched dome nut and washer & M12 x 75 allthread to suit doors up to 57mm thick (longer allthreads available upon request).
Pairs of Knobs are supplied with a back-to-back fixing system.
How to Order1) select KNOB (e.g. 2599)
2) add FINISH (e.g. 2599PBU)
3) add SIZE (e.g. 2599PBU/B)
4) To order a pair of Knobs with BACK-TO-BACK fixings add BTB (e.g. 2599PBU/B/BTB).
Finishes - See our price list or website for finish availability.
NB. Lacquered finishes (e.g. PB & SB etc.) are not recommended for exterior use.
custom sizes available upon request
custom sizes available upon request
D (dia) d (dia) P (projection)
2596 A Ø 75 Ø 94 72
2596 B Ø 94 Ø 113 86
D (dia) d (dia) P (projection)
2599 A Ø 75 Ø 94 76
2599 B Ø 94 Ø 113 93
P
d D
custom sizes available upon request
D (dia) d (dia) P (projection)
2598 A Ø 75 Ø 94 73
2598 B Ø 94 Ø 113 90
P
d D
custom sizes available upon request
D (dia) d (dia) P (projection)
2597 A Ø 75 Ø 94 72
2597 B Ø 94 Ø 113 86
P
d D
P
d D
Cabinet KnobsCabinet Furniture
Two classic Cabinet Knobs, available in four sizes with or without Rosette, designed to complement both Allart Select and Traditional Door Knobs (see sections ST2 and DF2).
Each knob & rosette is precision CNC machined for accuracy and consistent fine detailing.
Fixings
Supplied with M4 x 50mm break-off flange head machine screws.
How to Order1) select KNOB (e.g. 0642)
2) add FINISH (e.g. 0642PB)
3) add SIZE (e.g. 0642PB/B).
Choose DOWEL SCREW option if required (e.g. 0642PB/B/DS).
Finishes - See our price list or website for finish availability.
Dowel Screw option available
approx actual size C approx actual size C
0640 0641
approx actual size C approx actual size C
0642 0643
A B C D
D (dia) Ø 19 Ø 25 Ø 32 Ø 38
p (proj) 19 24 31 36
P (proj) 20 26 33 37
A B C D
D (dia) Ø 19 Ø 25 Ø 32 Ø 38
p (proj) 19 24 31 36
P (proj) 20 25 32 37
P p
D
P p
D
CF1:00512/17
Cabinet KnobsCabinet Furniture
Fixings
Supplied with M4 x 50mm break-off flange head machine screws.
How to Order1) select KNOB (e.g. 0644)
2) add FINISH (e.g. 0644PB)
3) add SIZE (e.g. 0644PB/B).
Choose DOWEL SCREW option if required (e.g. 0644PB/B/DS).
Finishes - See our price list or website for finish availability.
Dowel Screw option available
approx actual size C approx actual size C
0644 0645
approx actual size C approx actual size C
0646 0647
A B C D
D (dia) Ø 19 Ø 25 Ø 32 Ø 38
p (proj) 19 24 31 36
P (proj) 20 26 33 37
P p
D
A B C D
D (dia) Ø 19 Ø 25 Ø 32 Ø 38
p (proj) 19 24 30 36
P (proj) 20 26 31 37
P p
D
CF1:006 12/17
Two traditional Cabinet Knobs, available in four sizes with or without Rosette, designed to complement both Allart Select and Traditional Door Knobs (see sections ST2 and DF2).
Each knob & rosette is precision CNC machined for accuracy and consistent fine detailing.