ALL-ROUND JOYSTICK · 2015. 7. 24. · ALL-ROUND JOYSTICK ALL-ROUND JOYSTICK The All-round Joystick...

2
ALL-ROUND JOYSTICK ALL-ROUND JOYSTICK The All-round Joystick is a more compact version of the standard electronic wheelchair joystick module. As the name suggests, this joystick has been developed for all-round use and is suitable for the major part of wheelchair users. It can be used as a standard joystick, chin joystick or as an attendant joystick. P002-71 all-round use 2 jack inputs for switches size: 110 x 66 x 60 mm (4.33 x 2.60 x 2.36 in) required force: 250 gr (8.82 oz) 912666_ PRODUCTFICHES.indd 5 11/03/15 09:03

Transcript of ALL-ROUND JOYSTICK · 2015. 7. 24. · ALL-ROUND JOYSTICK ALL-ROUND JOYSTICK The All-round Joystick...

Page 1: ALL-ROUND JOYSTICK · 2015. 7. 24. · ALL-ROUND JOYSTICK ALL-ROUND JOYSTICK The All-round Joystick is a more compact version of the standard electronic wheelchair joystick module.

ALL-ROUNDJOYSTICK

ALL-ROUND JOYSTICK The All-round Joystick is a more compact version of the standard electronic wheelchair joystick module. As the name suggests, this joystick has been developed for all-round use and is suitable for the major part of wheelchair users. It can be used as a standard joystick, chin joystick or as an attendant joystick.

P002-71

all-round use 2 jack inputs for switches

size: 110 x 66 x 60 mm (4.33 x 2.60 x 2.36 in)

required force: 250 gr (8.82 oz)

912666_ PRODUCTFICHES.indd 5 11/03/15 09:03

Page 2: ALL-ROUND JOYSTICK · 2015. 7. 24. · ALL-ROUND JOYSTICK ALL-ROUND JOYSTICK The All-round Joystick is a more compact version of the standard electronic wheelchair joystick module.

mo-Vis bvba Biebuyckstraat 15 D, 9850 Nevele, Belgium [email protected] I www.mo-vis.com I +32 9 335 28 60

This fully proportional joystick with standard

amplitude and power requirement (250 gr/

8.82 oz) has a compact housing (110 x 66

x 60 mm or 4.33 x 2.60 x 2.36 in) and 2 jack

inputs for switches. This makes it possible to

connect 1 or 2 “satellite switches” directly via

integrated insert parts (one for power on/off

function and one for mode button).

In the housing of the joystick an interface

with sophisticated electronics is built in: these

electronics make the joystick adaptable to

individual capabilities and needs. Changes

of the parameters can be made by using

the mo-Vis Configurator Software: a free

downloadable software. The connection to the

pc – to configure the joystick or for diagnostic

purposes – is made by a USB cable directly from

the joystick to the computer (mini USB port).

The All-round Joystick is foreseen with 4 screw

holes for direct mounting on flat surfaces. For

more flexible mounting solutions, seperate

mounting tools are available (Mounting Plate

& Q2M Rods).

The All-round Joystick is Omni compatible with

its SUB D9 pin connector. For other versions,

a separate interface cable is necessary. Please

contact us for more details.

Thanks to its design and possibilities the All-

round Joystick is a very comfortable solution

for a large group of persons with disabilities or

their attendants to drive a powered wheelchair.

Ergonomics, flexibility, functionality, discretion

and elegance are important characteristics of

all mo-Vis products.

product description

about mo-Vis

Questions about the All-round Joystick?

Contact us by e-mail [email protected]

or phone +32 9 335 28 60

contact

mo-Vis stands for ‘move with Vision’, as we like

to keep moving forward and get people ‘on the

move’! All our products follow this vision. Not

only functionality, flexibility and ergonomics are

important, but discretion and elegance too.

912666_ PRODUCTFICHES.indd 6 11/03/15 09:03