All Proses

download All Proses

of 14

  • date post

    12-Dec-2015
  • Category

    Documents

  • view

    213
  • download

    0

Embed Size (px)

description

Autocad

Transcript of All Proses

4.3 ProsesLangkah Pembinaan

BILARAHANVISUAL

1Command: _lineSpecify first point:Specify next point or [Undo]: 4Specify next point or [Undo]: 8Specify next point or [Close/Undo]: 4Specify next point or [Close/Undo]: 8Command: PEDITSelect polyline or [Multiple]:Object selected is not a polylineDo you want to turn it into one? yEnter an option [Close/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype gen/Reverse/Undo]: jSelect objects: 1 found, 4 totalSelect objects:3 segments added to polylineEnter an option [Open/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype gen/Reverse/Undo]:

Command: _extrudeCurrent wire frame density: ISOLINES=4, Closed profiles creation mode = SolidSelect objects to extrude or [MOde]: _MO Closed profiles creation mode [SOlid/SUrface] : _SOSelect objects to extrude or [MOde]: 1 foundSelect objects to extrude or [MOde]:Specify height of extrusion or [Direction/Path/Taper angle/Expression]: 4

2Command: _lineSpecify first point:Specify next point or [Undo]: 15Specify next point or [Undo]: 4Specify next point or [Close/Undo]: 15Specify next point or [Close/Undo]: 4Specify next point or [Close/Undo]:Command:

Command: PEDITSelect polyline or [Multiple]:Object selected is not a polylineDo you want to turn it into one? yEnter an option [Close/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype gen/Reverse/Undo]: jSelect objects: 1 foundSelect objects: 1 found, 2 totalSelect objects: 1 found, 3 totalSelect objects: 1 found, 4 totalSelect objects:3 segments added to polylineEnter an option [Open/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype gen/Reverse/Undo]:Command: _extrudeCurrent wire frame density: ISOLINES=4, Closed profiles creation mode = SolidSelect objects to extrude or [MOde]: _MO Closed profiles creation mode [SOlid/SUrface] : _SOSelect objects to extrude or [MOde]: 1 foundSelect objects to extrude or [MOde]:Specify height of extrusion or [Direction/Path/Taper angle/Expression] : 2

3Command: _lineSpecify first point:Specify next point or [Undo]:Specify next point or [Undo]: 1Specify next point or [Close/Undo]: 8Specify next point or [Close/Undo]: 1Specify next point or [Close/Undo]:Command: _lineSpecify first point:Specify next point or [Undo]: 2Specify next point or [Undo]: 8Specify next point or [Close/Undo]:Command: _lineSpecify first point:Specify next point or [Undo]: 1Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] :Specify second point or :

4 Command: _boxSpecify first corner or [Center]:Specify other corner or [Cube/Length]: lSpecify length: 2Specify width: 1Specify height or [2Point] : 10

5Command: _moveSelect objects: Specify opposite corner: 0 foundSelect objects: 1 foundSelect objects:Specify base point or [Displacement] :Specify second point or :

6Command: SUBTRACTSelect solids, surfaces, and regions to subtract from ..Select objects: 1 foundSelect objects:Select solids, surfaces, and regions to subtract ..Select objects: 1 foundSelect objects:

7Command: _polygonEnter number of sides : 6Specify center of polygon or [Edge]:Enter an option [Inscribed in circle/Circumscribed about circle] : cSpecify radius of circle: 0.5Command: _extrudeCurrent wire frame density: ISOLINES=4, Closed profiles creation mode = SolidSelect objects to extrude or [MOde]: _MO Closed profiles creation mode [SOlid/SUrface] : _SOSelect objects to extrude or [MOde]: 1 foundSelect objects to extrude or [MOde]:Specify height of extrusion or [Direction/Path/Taper angle/Expression] : 2(Buat 2 lagi polygon Radius : 0.75, 1)

Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] :Specify second point or :

8Command: SUBTRACTSelect solids, surfaces, and regions to subtract from ..Select objects: 1 foundSelect objects:Select solids, surfaces, and regions to subtract ..Select objects: 1 foundSelect objects:(Subtract ketiga-tiga polygon)

9Command:_boxSpecify first corner or [Center]:Specify other corner or [Cube/Length]: lSpecify length : 5Specify width : 5Specify height or [2Point] : 3

Command: FILLETCurrent settings: Mode = TRIM, Radius = 0.0000Select first object or [Undo/Polyline/Radius/Trim/Multiple]:Enter fillet radius or [Expression]: 0.5Select an edge or [Chain/Loop/Radius]:1 edge(s) selected for fillet.(Repeat for 3 other edges)

10Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] :Specify second point or :

11Command: _cylinderSpecify center point of base or [3P/2P/Ttr/Elliptical]:Specify base radius or [Diameter] : dSpecify diameter : 6Specify height or [2Point/Axis endpoint] : 3Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] :Specify second point or :

12Command: _boxSpecify first corner or [Center]:Specify other corner or [Cube/Length]: LSpecify length: 0.5Specify width: 0.5Specify height or [2Point] : 1

13Command: _lineSpecify first point:Specify next point or [Undo]: 0.5Specify next point or [Undo]:Specify next point or [Close/Undo]:Command: REGIONSelect objects: Specify opposite corner: 3 foundSelect objects:1 loop extracted.1 Region createdCommand: _extrudeCurrent wire frame density: ISOLINES=4, Closed profiles creation mode = SolidSelect objects to extrude or [MOde]: _MO Closed profiles creation mode [SOlid/SUrface] : _SOSelect objects to extrude or [MOde]: 1 foundSelect objects to extrude or [MOde]:Specify height of extrusion or [Direction/Path/Taper angle/Expression] : 0.5

14Command: _mirror3dSelect objects: 1 foundSelect objects:Specify first point of mirror plane (3 points) or[Object/Last/Zaxis/View/XY/YZ/ZX/3points] : Specify second point on mirror plane: Specify third point on mirror plane:Delete source objects? [Yes/No] : N

15Command: _boxSpecify first corner or [Center]:Specify other corner or [Cube/Length]: LSpecify length : 0.5Specify width : 0.5Specify height or [2Point] : 1Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] :Specify second point or :(Move kedua-dua objek Bil14)

Command: SUBTRACTSelect solids, surfaces, and regions to subtract from ..Select objects: 1 foundSelect objects:Select solids, surfaces, and regions to subtract ..Select objects: 1 found(Subtract kedua-dua objek Bil14)

16Command: _boxSpecify first corner or [Center]:Specify other corner or [Cube/Length]: LSpecify length : 0.5Specify width : 0.5Specify height or [2Point] : 2

17Command: _cylinderSpecify center point of base or [3P/2P/Ttr/Elliptical]:Specify base radius or [Diameter] : dSpecify diameter : 1Specify height or [2Point/Axis endpoint] : 4Command:Command:Command: _cylinderSpecify center point of base or [3P/2P/Ttr/Elliptical]:Specify base radius or [Diameter] : dSpecify diameter : 0.75Specify height or [2Point/Axis endpoint] : 2

18Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] :Specify second point or :(Gabungkan semua objek dalam Bil 5, 16, 17)

Command: _unionSelect objects: Specify opposite corner: 8 foundSelect objects:

19Command: CYLCYLINDER (A)Specify center point of base or [3P/2P/Ttr/Elliptical]:Specify base radius or [Diameter] : DSpecify diameter : 0.4Specify height or [2Point/Axis endpoint] : 2.2

Command: CYLINDER (B)Specify center point of base or [3P/2P/Ttr/Elliptical]:Specify base radius or [Diameter] : DSpecify diameter : 0.6Specify height or [2Point/Axis endpoint] : 2.2

Command: _3drotateCurrent positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0Select objects: 1 foundSelect objects:Specify base point:** ROTATE **Specify rotation angle or [Base point/Copy/Undo/Reference/eXit]:Command:

20Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] :Specify second point or :Command: SUBTRACTSelect solids, surfaces, and regions to subtract from ..Select objects: 1 foundSelect objects:Select solids, surfaces, and regions to subtract ..Select objects: 1 foundSelect objects:(Subtract Cylinder A daripada cylinder B)

21Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] :Checking 820 intersections...Specify second point or :Command: SUBTRACTSelect solids, surfaces, and regions to subtract from ..Select objects: 1 foundSelect objects:

22Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] :Too many objects selected for INTERSECTSpecify second point or :Command: SUBTRACTSelect solids, surfaces, and regions to subtract from ..Select objects: 1 foundSelect objects:Select solids, surfaces, and regions to subtract ..Select objects: 1 foundSelect objects:

23Command: _lineSpecify first point:Checking 595 intersections...Specify next point or [Undo]: 0.5Specify next point or [Undo]: 0.1Specify next point or [Close/Undo]: 0.6Specify next point or [Close/Undo]:Specify next point or [Close/Undo]:Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] :Specify second point or :Command:

24Command: _moveSelect objects: 1 foundSelect objects: 1 found, 2 totalSelect objects:Specify base point or [Displacement] :Too many objects selected for INTERSECTSpecify second point or :

25Command: _unionSelect objects: Specify opposite corner: 32 foundSelect objects: