All Products are RoHS compliant. A summary of all...
Transcript of All Products are RoHS compliant. A summary of all...
All Products are RoHS compliant. A summary of all products and possible exceptions can be found on our internet site www.fctgroup.com, menu item RoHS product summary.
Alle Erzeugnisse sind RoHS konform. Eine Übersicht über alle Erzeugnisse und eventuelle Ausnahmen finden Sie auf unserer Internetseite www.fctgroup.com, Menüpunkt RoHS Artikelübersicht
Please NoteWe accept no responsibility for the rights of third parties with regards to any of the herein printed tables or descriptions. With this catalogue components are illustrated, features are not guaranteed. Availability and technical alterations are subject to change without prior warning. We accept no responsibility for human error or misprints within this catalogue. We offer no guarantee for the completeness of any herein printed reports. Reproduction of this catalogue and utilization of its contents are prohibited, unless otherwise expressly stated!January 2009 © FCT electronic gmbh, Munich, Germany
AnmerkungFür die angegebenen Beschreibungen und Tabellen wird keine Gewähr bezüglich der Freiheit und Rechten Dritter übernommen. Mit den Angaben werden die Bauelemente spezifiziert, nicht Eigenschaften zugesichert. Liefermöglichkeiten und technische Änderungen ohne Vorankündigung, Irrtum und Druckfehler vorbehalten. Für die Abhandlungen kann keine Garantie auf Vollständigkeit übernommen werden. Vervielfältigung dieser Unterlage sowie Verwertung ihres Inhalts sind unzulässig, soweit nicht ausdrücklich zugestanden!Januar 2009 © FCT electronic gmbh, München, Deutschland
4 TECHNISCHE ÄNDERUNGEN VORBEHALTEN - MAßE IN MILLIMETER (INCHES IN KLAMMERN)HD 01/2009
General Information .................................................................................................................... 6Allgemeine Informationen ........................................................................................................... 6
High Density D-Sub Connectors ................................................................................................. 6High Density D-Sub Steckverbinder ............................................................................................ 6Technical Data .....................................................................................................................................................................................6Technische Daten ................................................................................................................................................................................6
Ordering Code (High Density D-Sub Connectors) ................................................................................................................................7Bestellschlüssel (High Density D-Sub Steckverbinder) ........................................................................................................................7
Pin: Solder Pot Termination ..................................................................................................................................................................8Stift: Löttopfanschluss .........................................................................................................................................................................8
Socket: Solder Pot Termination ............................................................................................................................................................9Buchse: Löttopfanschluss ....................................................................................................................................................................9
Pin: Straight PCB Termination ............................................................................................................................................................10Stift: Gerader Leiterplattenanschluss .................................................................................................................................................10
Socket: Straight PCB Termination ......................................................................................................................................................11Buchse: Gerader Leiterplattenanschluss ............................................................................................................................................11
Pin: Right Angled PCB Termination ....................................................................................................................................................12Stift: Abgewinkelter Leiterplattenanschluss .......................................................................................................................................12
Socket: Right Angled PCB Termination ..............................................................................................................................................13Buchse: Abgewinkelter Leiterplattenanschluss..................................................................................................................................13
Panel Cut-out .....................................................................................................................................................................................14Montageausschnitt ............................................................................................................................................................................14
High Density D-Sub Crimp Connectors ..................................................................................... 15High Density D-Sub Crimp Steckverbinder ................................................................................ 15Technical Data ...................................................................................................................................................................................15Technische Daten ..............................................................................................................................................................................15
Ordering Code (High Density D-Sub Crimp Connectors) ....................................................................................................................16Bestellschlüssel (High Density D-Sub Crimp Steckverbinder) ............................................................................................................16
Pin: Crimp Termination ......................................................................................................................................................................17Stift: Crimpanschluss .........................................................................................................................................................................17
Socket: Crimp Termination ................................................................................................................................................................18Buchse: Crimpanschluss ....................................................................................................................................................................18
Stamped Crimp Contacts ..................................................................................................................................................................19Gestanzte Crimpkontakte ...................................................................................................................................................................19
Turned Crimp Contacts ......................................................................................................................................................................20Gedrehte Crimpkontakte ....................................................................................................................................................................20
Accessories ............................................................................................................................. 21Zubehör .................................................................................................................................... 21Clinch Nuts ........................................................................................................................................................................................21Einnietmuttern ...................................................................................................................................................................................21
Threaded Spacers .............................................................................................................................................................................21Abstandsbolzen .................................................................................................................................................................................21
Frontside Spacers and Rearside Spacers or Snap-in Bolts ................................................................................................................22Frontseitiger Abstandsbolzen und rückseitiger Abstands- oder Schnappbolzen .................................................................................22
Snap-in Bolts for PCB Mounting ........................................................................................................................................................23Schnappbolzen für Leiterplattenmontage ...........................................................................................................................................23
Female Screw Locks F-GSCH1/5... ....................................................................................................................................................23Sechskantbolzen F-GSCH1/5... ..........................................................................................................................................................23
List of ContentsInhaltsverzeichnis
5DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE HD 01/2009
Shielded Right Angled Adapter, Screwable .............................................................................. 24Geschirmter Winkeladapter, verschraubbar .............................................................................. 24Ordering Code, Use Contact Type and Direction of Right Angled Contacts ........................................................................................24Bestellschlüssel, Nutzung Kontaktart und Richtung der abgewinkelten Kontakte ..............................................................................24
Ordering Code ...................................................................................................................................................................................25Bestellschlüssel .................................................................................................................................................................................25
Technical Data ...................................................................................................................................................................................26Technische Daten ..............................................................................................................................................................................26
Dimensions .......................................................................................................................................................................................27Abmessungen ....................................................................................................................................................................................27
Application Example ..........................................................................................................................................................................27Einsatzbeispiel ...................................................................................................................................................................................27
Crimping Tools .......................................................................................................................... 28Crimpwerkzeuge ....................................................................................................................... 28For Stamped Contacts .......................................................................................................................................................................28Für gestanzte Kontakte ......................................................................................................................................................................28
For Turned MIL- and Standard Contacts ............................................................................................................................................29Für gedrehte MIL- und Standardkontakte ..........................................................................................................................................29
Insertion and Extraction Tools................................................................................................... 29Ein- und Ausbauwerkzeuge ...................................................................................................... 29Plastic Insertion / Extraction Tool ......................................................................................................................................................29Ein- / Ausbauwerkzeug aus Kunststoff ...............................................................................................................................................29
Plastic Insertion / Extraction Tool with Metal Clips ............................................................................................................................29Ein- / Ausbauwerkzeug aus Kunststoff mit Metallspitzen ...................................................................................................................29
Insertion Tool - Metal Tweezers .........................................................................................................................................................29Einbauwerkzeug - Metallpinzette ......................................................................................................................................................29
Extraction Tool - Metal Tweezers .......................................................................................................................................................29Ausbauwerkzeug - Metallpinzette .....................................................................................................................................................29
Waterproof Connector Systems ............................................................................................... 30Wasserdichte Steckverbindersysteme ...................................................................................... 30Ordering Code for Waterproof Connectors .........................................................................................................................................30Bestellschlüssel für wasserdichte Steckverbinder .............................................................................................................................30
Technical Data ...................................................................................................................................................................................31Technische Daten ..............................................................................................................................................................................31
Waterproof Connectors with Metal Watertight Frame .......................................................................................................................32Wasserdichte Steckverbinder mit Metalldichtrahmen .......................................................................................................................32
Ordering Data (Waterproof D-Sub Connectors for FWH Hoods) ........................................................................................................33Bestelldaten (wasserdichte D-Sub Steckverbinder für Hauben FWH) ................................................................................................33
Front Mounting ..................................................................................................................................................................................34Frontseitige Montage ........................................................................................................................................................................34
Rear Mounting ...................................................................................................................................................................................34Rückseitige Montage .........................................................................................................................................................................34
Accessories for Pin Connectors .........................................................................................................................................................34Zubehör für Stiftsteckverbinder .........................................................................................................................................................34
Order Number Index ................................................................................................................. 35Bestellnummern - Index ............................................................................................................ 35
List of ContentsInhaltsverzeichnis
6 TECHNISCHE ÄNDERUNGEN VORBEHALTEN - MAßE IN MILLIMETER (INCHES IN KLAMMERN)HD 01/2009
Mechanical DataMechanische Daten
Shell Steel, tin plated; pin shell with dimplesGehäuse Stahl, verzinnt; Stiftgehäuse mit KontaktnoppenInsulator Thermoplastic, glassfilled UL94V-0Isolierkörper Thermoplast, glasfaserverstärkt UL94V-0Signal contacts Copper alloy, flash gold platedSignalkontakte Kupferlegierung, Oberfläche Hauchvergoldung
Electrical DataElektrische Daten
Current rating 3 A
Maximale Stromstärke Contact resistance
≤Durchgangswiderstand
15 mΩ
Insulation resistance≥
Isolationswiderstand 3000 MΩ
Test voltage 1000 V
Prüfspannung Operating temperature
-55 °C bis 105 °C (-67 °F to 221 °F)Betriebstemperatur
In terms of their outside dimensions the shells of the high density D-Sub series are the same as for the well known standard D-Sub connectors, but the number of contacts has been considerably increased.Due to the higher density of 15, 26, 44, 62 and 78 contacts, this series is ideally suited for the most modern applications in data transmission and telecommunications, as well as in measurement, regulation and control devices.Protection against misalignment or bending of contacts is guaranteed by the use of a trapeze shaped metal shell. The tin plated shells also offer good shielding qualities and are mechanically stable. Because of their compact design and low mounting flange, these connectors can also be used without difficulty in the tried and tested 19”-modules.These connectors are available in straight and right angled versions for p.c. boards. They can also be supplied for cable assemblies in solder or crimp version. The heat resistant plastics used in the production of the connectors meet UL94V-0 requirements.
Die High Density D-Sub Serie verwendet von den Außenabmessungen die Gehäuse der bekannten Standard D-Sub Steckverbinder, jedoch hat sich die Anzahl der Kontakte wesentlich erhöht.Durch die höhere Dichte von 15, 26, 44, 62 und 78 Kontakten eignet sich diese Serie hervorragend für modernste Anwendungen der Datentechnik, Telekommunikation sowie Mess-, Regel- und Steuerungstechnik.Ein sicherer Verdrehschutz ist durch das trapezförmige Metallgehäuse ge-währleistet. Die verzinnten Gehäuse bieten gute Abschirmeigenschaften und sind mechanisch stabil. Aufgrund der kompakten Bauweise und des niedrigen Montageflansches sind diese Steckverbinder in den bewährten 19 “-Einschüben problemlos einsetzbar.Die Steckverbinder sind in gerader bzw. abgewinkelter Ausführung für Leiterplattenmontage sowie zur Kabelmontage in Löt- oder Crimptechnik lieferbar. Die verwendeten temperaturbeständigen Kunststoffe entsprechen den Anforderungen nach UL94V-0.
Mechanical DataMechanische Daten
Electrical DataElektrische Daten
General InformationAllgemeine Informationen
High Density D-Sub ConnectorsHigh Density D-Sub SteckverbinderTechnical DataTechnische Daten
7DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE HD 01/2009
Ordering Code (High Density D-Sub Connectors)Bestellschlüssel (High Density D-Sub Steckverbinder)
8 TECHNISCHE ÄNDERUNGEN VORBEHALTEN - MAßE IN MILLIMETER (INCHES IN KLAMMERN)HD 01/2009
D
B
A
E
C
3
0.118
0.1
89
4.8
0.1
97
5
0.9
0.0
35
G
2.8
0.1
1
5.9
±0
.2
0.2
32
±0
.00
8
F
Pin: Solder Pot TerminationStift: LöttopfanschlussDimensionsAbmessungen
Pin Connector, Front ViewStiftsteckverbinder, Frontansicht
DimensionsAbmessungen
Stamped contacts(wire size: max. AWG 22)Gestanzte Kontakte(Drahtgröße: max. AWG 22)
Order Number Shell Size Number of Contacts A B C D E F GBestellnummer Gehäusegröße Polzahl ±0,4 +0,2 ±0,15 +0,2 ±0,4 ±0,3 ±0,3
(±0.016) (+0.008) (±0.006) (+0.008) (±0.016) (±0.012) (±0.012)
CT09-15P 1 1530,8 16,9 25,0 8,2 12,5 10,8 19,3
(1.213) (0.665) (0.984) (0.323) (0.492) (0.425) (0.760)
CT15-26P 2 2639,1 25,2 33,3 8,2 12,5 10,8 27,5
(1.539) (0.992) (1.311) (0.323) (0.492) (0.425) (1.083)
CT25-44P 3 4453,0 38,9 47,04 8,2 12,5 10,8 41,3
(2.087) (1.531) (1.852) (0.323) (0.492) (0.425) (1.626)
CT37-62P 4 6269,3 55,3 63,5 8,2 12,5 10,8 57,7
(2.728) (2.177) (2.500) (0.323) (0.492) (0.425) (2.272)
CT50-78P 5 7866,9 52,8 61,1 11,0 15,4 13,7 55,3
(2.634) (2.079) (2.406) (0.433) (0.606) (0.539) (2.177)
9DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE HD 01/2009
B
C
DE
3
0.118
A
0.1
1
2.8
0.1
97
5
G0.9
0.0
35
4.8
0.1
89
5.9
±0.2
0.2
32
±0.0
08
F
Socket: Solder Pot TerminationBuchse: LöttopfanschlussDimensionsAbmessungen
Socket Connector, Front ViewBuchsensteckverbinder, Frontansicht
DimensionsAbmessungen
Stamped contacts(wire size: max. AWG 22)Gestanzte Kontakte(Drahtgröße: max. AWG 22)
Order Number Shell Size Number of Contacts A B C D E F GBestellnummer Gehäusegröße Polzahl ±0,4 -0,2 ±0,15 -0,2 ±0,4 ±0,3 ±0,3
(±0.016) (-0.008) (±0.006) (-0.008) (±0.016) (±0.012) (±0.012)
CT09-15S 1 1530,8 16,4 25,0 8,0 12,5 10,8 19,3
(1.213) (0.646) (0.984) (0.315) (0.492) (0.425) (0.760)
CT15-26S 2 2639,1 24,7 33,3 8,0 12,5 10,8 27,5
(1.539) (0.972) (1.311) (0.315) (0.492) (0.425) (1.083)
CT25-44S 3 4453,0 38,5 47,04 8,0 12,5 10,8 41,3
(2.087) (1.516) (1.852) (0.315) (0.492) (0.425) (1.626)
CT37-62S 4 6269,3 54,9 63,5 8,0 12,5 10,8 57,7
(2.728) (2.161) (2.500) (0.315) (0.492) (0.425) (2.272)
CT50-78S 5 7866,9 52,5 61,1 10,8 15,4 13,7 55,3
(2.634) (2.067) (2.406) (0.425) (0.606) (0.539) (2.177)
10 TECHNISCHE ÄNDERUNGEN VORBEHALTEN - MAßE IN MILLIMETER (INCHES IN KLAMMERN)HD 01/2009
D
B
A
E
C
3
0.118
0.024
0.6
0.9
0.0
35
G
5.5
0.2
17
9.5
0.3
74
F
5.9
±0
.2
0.2
32
±0
.00
8
16.3
0.6
42
Stamped contactsGestanzte Kontakte
Pin: Straight PCB TerminationStift: Gerader LeiterplattenanschlussDimensionsAbmessungen
Pin Connector, Front ViewStiftsteckverbinder, Frontansicht
PCB Hole Pattern (Mounting Side)Leiterplattenlochbild (Bestückungsseite)
DimensionsAbmessungen
Hole Pattern 26, 44 and 62 ContactsLochbild 26-, 44- und 62-polig
Hole Pattern 78 ContactsLochbild 78-polig
Hole Pattern 15 ContactsLochbild 15-polig
Order Number Shell Size Number of Contacts A B C D E F G H JBestellnummer Gehäusegröße Polzahl ±0,4 +0,2 ±0,15 +0,2 ±0,4 ±0,3 ±0,3
(±0.016) (+0.008) (±0.006) (+0.008) (±0.016) (±0.012) (±0.012)
CT09-15P1 1 1530,8 16,9 25,0 8,2 12,5 10,8 19,3 7,10 2,29
(1.213) (0.665) (0.984) (0.323) (0.492) (0.425) (0.760) (0.280) (0.090)
CT15-26P1 2 2639,1 25,2 33,3 8,2 12,5 10,8 27,5 6,80 2,29
(1.539) (0.992) (1.311) (0.323) (0.492) (0.425) (1.083) (0.268) (0.090)
CT25-44P1 3 4453,0 38,9 47,04 8,2 12,5 10,8 41,3 7,00 2,29
(2.087) (1.531) (1.852) (0.323) (0.492) (0.425) (1.626) (0.276) (0.090)
CT37-62P1 4 6269,3 55,3 63,5 8,2 12,5 10,8 57,7 7,00 2,42
(2.728) (2.177) (2.500) (0.323) (0.492) (0.425) (2.272) (0.276) (0.095)
CT50-78P1 5 7866,9 52,8 61,1 11,0 15,4 13,7 55,3 7,60 2,42
(2.634) (2.079) (2.406) (0.433) (0.606) (0.539) (2.177) (0.299) (0.095)
11DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE HD 01/2009
D
B
A
E
3
0.118
C
0.3
74
9.5
0.2
17
5.5
0.9
0.0
35
0.6
0.024
G
0.6
42
16.3
F
5.9
±0.2
0.2
32
±0.0
08
Stamped contactsGestanzte Kontakte
Socket: Straight PCB TerminationBuchse: Gerader LeiterplattenanschlussDimensionsAbmessungen
Socket Connector, Front ViewBuchsensteckverbinder, Frontansicht
PCB Hole Pattern (Mounting Side)Leiterplattenlochbild (Bestückungsseite)
Hole Pattern 78 ContactsLochbild 78-polig
Hole Pattern 26, 44 and 62 ContactsLochbild 26-, 44- und 62-polig
Hole Pattern 15 ContactsLochbild 15-polig
DimensionsAbmessungen
Order Number Shell Size Number of Contacts A B C D E F G H JBestellnummer Gehäusegröße Polzahl ±0,4 -0,2 ±0,15 -0,2 ±0,4 ±0,3 ±0,3
(±0.016) (-0.008) (±0.006) (-0.008) (±0.016) (±0.012) (±0.012)
CT09-15S1 1 1530,8 16,4 25,0 8,0 12,5 10,8 19,3 7,10 2,29(1.213) (0.646) (0.984) (0.315) (0.492) (0.425) (0.760) (0.280) (0.090)
CT15-26S1 2 2639,1 24,7 33,3 8,0 12,5 10,8 27,5 6,80 2,29(1.539) (0.972) (1.311) (0.315) (0.492) (0.425) (1.083) (0.268) (0.090)
CT25-44S1 3 4453,0 38,5 47,04 8,0 12,5 10,8 41,3 7,00 2,29(2.087) (1.516) (1.852) (0.315) (0.492) (0.425) (1.626) (0.276) (0.090)
CT37-62S1 4 6269,3 54,9 63,5 8,0 12,5 10,8 57,7 7,00 2,42(2.728) (2.161) (2.500) (0.315) (0.492) (0.425) (2.272) (0.276) (0.095)
CT50-78S1 5 7866,9 52,5 61,1 10,8 15,4 13,7 55,3 7,60 2,42(2.634) (2.067) (2.406) (0.425) (0.606) (0.539) (2.177) (0.299) (0.095)
12 TECHNISCHE ÄNDERUNGEN VORBEHALTEN - MAßE IN MILLIMETER (INCHES IN KLAMMERN)HD 01/2009
Shell Size Number of Contacts A B C H JGehäusegröße Polzahl
Grounding Brackets without Snap-inMassewinkel ohne Snap-in ±0,4 +0,2 ±0,15
4-40 UNC-2B M3 4-40 UNC-2B (±0.016) (+0.008) (±0.006)30,8 16,9 25,0 7,10 2,29
(1.213) (0.665) (0.984) (0.280) (0.090)39,1 25,2 33,3 6,80 2,29
(1.539) (0.992) (1.311) (0.268) (0.090)53,0 38,9 47,04 7,00 2,29
(2.087) (1.531) (1.852) (0.276) (0.090)69,3 55,3 63,5 7,00 2,42
(2.728) (2.177) (2.500) (0.276) (0.095)
CT25-44P5-L229
CT37-62P5-L229
CT09-15P5-L228
CT15-26P5-L228
CT25-44P5-L228
CT37-62P5-L228
15
26
44
624
3
2
1
CT25-44P5-L222
CT37-62P5-L222
Order NumberBestellnummer
Grounding Brackets with Snap-in Snap-in Massewinkel
CT09-15P5-L222
CT15-26P5-L222
CT09-15P5-L229
CT15-26P5-L229
11.4
4
0.4
5
8.9
0.3
5
13.9
8
0.5
5
4-40 UNC-2B; M3
C
B
0.028
0.7
8.2
0.3
23
A
5.9
±0
.02
0.2
32
±0
.00
08
0.492
12.5 3.8
0.15
16
0.6
3
1
0.047
J
C
1.2
3.18
0.125
H
2.5
4
0.1
2.5
4
0.1
8.9
0.3
5
1
J
C
0.3
5
8.9
0.1
2.5
4
3.18
0.125
H
2.5
4
0.1
1.2
0.047
4-40 UNC-2B or M3 clinch nut on connector flange available.Mit 4-40 UNC-2B bzw. M3 Gewinde-niet im Steckerflansch lieferbar.
Stamped contactsGestanzte Kontakte
For snap-in or through holeFür Snap-in oder Durchgangsloch
Pin: Right Angled PCB TerminationStift: Abgewinkelter LeiterplattenanschlussDimensionsAbmessungen
Pin Connector, Front ViewStiftsteckverbinder, Frontansicht
DimensionsAbmessungen
PCB Hole Pattern (Mounting Side)Leiterplattenlochbild (Bestückungsseite)Hole Pattern 15 ContactsLochbild 15-polig
Hole Pattern 26, 44 and 62 ContactsLochbild 26-, 44- und 62-polig
13DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE HD 01/2009
11.4
4
0.4
5
8.9
0.3
5
13.9
8
0.5
5
4-40 UNC-2B; M3
C
D
B
0.7
0.028
AK
E 3.8
0.15
5.9
±0.2
0.2
32
±0.0
08
1
C
H
0.125
3.18J
8.9
0.3
5
0.1
2.5
4
2x
2.5
4
0.1
1.2
0.047
1
C
H
0.3
5
8.9
0.047
1.2J
2.5
4
0.1
2.5
4
0.1
3.18
0.125
1
0.1
C
H
2.5
4
J
0.125
3.18
8.9
0.3
5
2.5
4
0.1
1.2
0.047
Shell Size Number of Contacts A B C E H J KGehäusegröße Polzahl
Grounding Brackets without Snap-inMassewinkel ohne Snap-in ±0,4 -0,2 ±0,15 ±0,4
4-40 UNC-2B M3 4-40 UNC-2B (±0.016) (-0.008) (±0.006) (±0.016)30,8 16,4 25,0 12,5 7,10 2,29 16,0
(1.213) (0.646) (0.984) (0.492) (0.280) (0.090) (0.630)39,1 24,7 33,3 12,5 6,80 2,29 16,0
(1.539) (0.972) (1.311) (0.492) (0.268) (0.090) (0.630)53,0 38,5 47,04 12,5 7,00 2,29 16,0
(2.087) (1.516) (1.852) (0.492) (0.276) (0.090) (0.630)69,3 54,9 63,5 12,5 7,00 2,42 16,0
(2.728) (2.161) (2.500) (0.492) (0.276) (0.095) (0.630)66,9 52,5 61,1 13,8 7,60 2,42 17,4
(2.634) (2.067) (2.406) (0.543) (0.299) (0.095) (0.685)
* On request / auf Anfrage
26
44
62
CT09-15S5-L228
CT15-26S5-L228
CT25-44S5-L228
CT37-62S5-L228
CT09-15S5-L229
CT15-26S5-L229
CT25-44S5-L229
Grounding Brackets with Snap-in Snap-in Massewinkel
BestellnummerOrder Number
4
3
2
1
CT37-62S5-L229
78CT50-78S5-L228 CT50-78S5-L229* — 5
CT09-15S5-L222
CT15-26S5-L222
CT25-44S5-L222
CT37-62S5-L222
15
4-40 UNC-2B or M3 clinch nut on connector flange available.Mit 4-40 UNC-2B bzw. M3 Gewinde-niet im Steckerflansch lieferbar.
Stamped contactsGestanzte Kontakte
For snap-in or through holeFür Snap-in oder Durchgangsloch
Socket: Right Angled PCB TerminationBuchse: Abgewinkelter LeiterplattenanschlussDimensionsAbmessungen
Socket Connector, Front ViewBuchsensteckverbinder, Frontansicht
DimensionsAbmessungen
PCB Hole Pattern (Mounting Side)Leiterplattenlochbild (Bestückungsseite)Hole Pattern 15 ContactsLochbild 15-polig
Hole Pattern 26, 44 and 62 ContactsLochbild 26-, 44- und 62-polig
Hole Pattern 78 ContactsLochbild 78-polig
14 TECHNISCHE ÄNDERUNGEN VORBEHALTEN - MAßE IN MILLIMETER (INCHES IN KLAMMERN)HD 01/2009
0.2
0.008
0.0
87
2.2
0.0
16
0.4
0.1
61
4.1
0.4
0.0
16
2.9 ±0.10
0.114 ±0.004
0.0
87
2.2
0.008
0.2
4.1
0.1
61
0.0
16
0.4
0.4
0.0
16
2.9 ±0.10
0.114 ±0.004
Panel Cut-outMontageausschnitt
Standard, Front Mounted Float, Front Mounted (Series FW)Standard, frontseitig montiert Schwimmend, frontseitig montiert (Baureihe FW)
Rear MountedRückseitig montiert
Float, Rear Mounted (Series FW)Schwimmend, rückseitig montiert (Baureihe FW)
Standard, Rear MountedStandard, rückseitig montiert
Frontseitig montiertFront Mounted
The information for the panel cut-out is also valid for the crimp connectors (from page 15 onwards).Die Angaben zu den Montageausschnitten sind auch für die Crimpsteckverbinder (ab Seite 15) gültig.
Shell Size A B CGehäusegröße ±0,2 (±0.008) ±0,1 (±0.004) ±0,2 (±0.008)
1 22,2 (0.874) 25,0 (0.984) 12,3 (0.484)2 30,5 (1.201) 33,3 (1.311) 12,3 (0.484)3 44,3 (1.744) 47,0 (1.850) 12,3 (0.484)4 60,7 (2.390) 63,5 (2.500) 12,3 (0.484)5 58,3 (2.295) 61,1 (2.406) 15,1 (0.594)
Shell Size Mounting Ø DGehäusegröße Befestigung ±0,05 (±0.002)
1 - 5 Standard / Standard 3,1 (0.122)1 - 5 Float mounted / schwimmend 2,2 (0.087)
Shell Size A B CGehäusegröße ±0,2 (±0.008) ±0,1 (±0.004) ±0,2 (±0.008)
1 20,5 (0.807) 25,0 (0.984) 11,4 (0.449)2 28,8 (1.134) 33,3 (1.311) 11,4 (0.449)3 42,5 (1.673) 47,0 (1.850) 11,4 (0.449)4 59,1 (2.327) 63,5 (2.500) 11,4 (0.449)5 56,3 (2.217) 61,1 (2.406) 14,1 (0.555)
Shell Size Mounting Ø DGehäusegröße Befestigung ±0,05 (±0.002)
1 - 5 Standard / Standard 3,1 (0.122)1 - 5 float mounted / schwimmend 2,2 (0.087)
15DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE HD 01/2009
Technical DataTechnische Daten
High Density D-Sub Crimp ConnectorsHigh Density D-Sub Crimp Steckverbinder
Mechanical DataMechanische Daten
Electrical DataElektrische Daten
Mechanical DataMechanische Daten
Shell Steel, tin plated; pin shell with dimplesGehäuse Stahl, verzinnt; Stiftgehäuse mit KontaktnoppenInsulator Thermoplastic, glassfilled UL94V-0Isolierkörper Thermoplast, glasfaserverstärkt UL94V-0Signal contacts Copper alloy, gold platedSignalkontakte Kupferlegierung, vergoldet
Electrical DataElektrische Daten
Current rating 3 A
Maximale Stromstärke Contact resistance
≤ Durchgangswiderstand
10 mΩ
Insulation resistance≥
Isolationswiderstand 5000 MΩ
Test voltage 1000 V
Prüfspannung Operating temperatureBetriebstemperatur
-55 °C bis 115 °C (-67 °F to 239 °F)
16 TECHNISCHE ÄNDERUNGEN VORBEHALTEN - MAßE IN MILLIMETER (INCHES IN KLAMMERN)HD 01/2009
FL 09-15 P 7 - ...
High Density D-Sub series prefixHigh Density D-Sub Serienbezeichnung
No. of Contacts / Polzahlen
Contact Type / Kontaktart
Contact Design / Kontaktvariante
Modifications / Modifikationen
09-15
15-26
25-44
37-62
50-78
15 contacts in shell size 1 (corresponds to 9 pin D-Sub standard connector shell) *15-polig in Gehäusegröße 1 (entspricht 9poligem D-Sub Standard Steckverbindergehäuse) *
26 contacts in shell size 2 (corresponds to 15 pin D-Sub standard connector shell) *26-polig in Gehäusegröße 2 (entspricht 15poligem D-Sub Standard Steckverbindergehäuse) *
44 contacts in shell size 3 (corresponds to 25 pin D-Sub standard connector shell) *44-polig in Gehäusegröße 3 (entspricht 25poligem D-Sub Standard Steckverbindergehäuse) *
62 contacts in shell size 4 (corresponds to 37 pin D-Sub standard connector shell) *62-polig in Gehäusegröße 4 (entspricht 37poligem D-Sub Standard Steckverbindergehäuse) *
78 contacts in shell size 5 (corresponds to 50 pin D-Sub standard connector shell) **78-polig in Gehäusegröße 5 (entspricht 50poligem D-Sub Standard Steckverbindergehäuse) **
Pin / Stift
Socket / Buchse
Crimp termination / Crimpanschluss
P
S
7
W
Mounting Type / Befestigungsarten
W
T
Z
TS
FL
ZS
CT
Standard / Standard
Clinch nut 4-40 UNC / Einnietmutter 4-40 UNC
Clinch nut M3 / Einnietmutter M3
Clinch nut 4-40 UNC, self locking / Einnietmutter 4-40 UNC, selbstsichernd
Shell size 1 - 4 / Gehäusegröße 1 - 4
Clinch nut M3, self locking / Einnietmutter selbstsicherndM3,
Shell size 5 / Gehäusegröße 5
Float mounted / Schwimmend
* Retentionsystem of plastic /Retentionsystem of metal /**
Kontakthalteclip aus KunststoffKontakthalteclip aus Metall
Ordering Code (High Density D-Sub Crimp Connectors)Bestellschlüssel (High Density D-Sub Crimp Steckverbinder)
17DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE HD 01/2009
D
B
E
A
C
3.1 ±0.1
0.122 ±0.004
0.9
0
+0
.2
0.0
35
0.0
00
+0
.00
8
H
G
F
Order Number Shell Size Number of Contacts A B C D E F G HBestellnummer Gehäusegröße Polzahl ±0,4 +0,2 ±0,15 +0,2 ±0,4 ±0,3 -0,3
(±0.016) (+0.008) (±0.006) (+0.008) (±0.016) (±0.012) (-0.012)30,8 16,9 25,0 8,2 12,5 10,8 6,1 8,95
(1.213) (0.665) (0.984) (0.323) (0.492) (0.425) (0.240) (0.352)39,1 25,2 33,3 8,2 12,5 10,8 6,1 8,95
(1.539) (0.992) (1.311) (0.323) (0.492) (0.425) (0.240) (0.352)53,0 38,9 47,04 8,2 12,5 10,8 6,0 8,95
(2.087) (1.531) (1.852) (0.323) (0.492) (0.425) (0.236) (0.352)69,3 55,3 63,5 8,2 12,5 10,8 6,0 8,95
(2.728) (2.177) (2.500) (0.323) (0.492) (0.425) (0.236) (0.352)66,9 52,8 61,1 11,0 15,4 13,7 6,0 9,50
(2.634) (2.079) (2.406) (0.433) (0.606) (0.539) (0.236) (0.374)5
1
2
3
4
CT50-78P7
15
26
44
62
78
FL09-15P7
FL15-26P7
FL25-44P7
FL37-62P7
Pin: Crimp TerminationStift: CrimpanschlussDimensionsAbmessungen
Pin Connector without Contacts, Front ViewStiftsteckverbinder ohne Kontakte, Frontansicht
DimensionsAbmessungen
High Density Crimp connectors are supplied without contacts. Crimp contacts must be ordered separately. See page 19 and 20. High Density Crimpsteckverbinder werden serienmäßig ohne Kontakte geliefert. Crimpkontakte müssen extra bestellt werden. Siehe Seite 19 und 20.
18 TECHNISCHE ÄNDERUNGEN VORBEHALTEN - MAßE IN MILLIMETER (INCHES IN KLAMMERN)HD 01/2009
B
DE
A
C
3.1 ±0.1
0.122 ±0.004
0.8
0
+0
.2
0.0
31
0.0
00
+0
.00
8
H
F
G
Order Number Shell Size Number of Contacts A B C D E F G HBestellnummer Gehäusegröße Polzahl ±0,4 -0,2 ±0,15 -0,2 ±0,4 ±0,3 -0,25
(±0.016) (-0.008) (±0.006) (-0.008) (±0.016) (±0.012) (-0.012)30,8 16,4 25,0 8,0 12,5 10,8 6,3 8,95
(1.213) (0.646) (0.984) (0.315) (0.492) (0.425) (0.248) (0.352)39,1 24,7 33,3 8,0 12,5 10,8 6,3 8,95
(1.539) (0.972) (1.311) (0.315) (0.492) (0.425) (0.248) (0.352)53,0 38,5 47,04 8,0 12,5 10,8 6,3 8,95
(2.087) (1.516) (1.852) (0.315) (0.492) (0.425) (0.248) (0.352)69,3 54,9 63,5 8,0 12,5 10,8 6,3 8,95
(2.728) (2.161) (2.500) (0.315) (0.492) (0.425) (0.248) (0.352)66,9 52,5 61,1 10,8 15,4 13,7 5,9 ±0,2 9,50
(2.634) (2.067) (2.406) (0.425) (0.606) (0.539) (0.232 ±0.008) (0.374)5
1
2
3
4
CT50-78S7
15
26
44
62
78
FL09-15S7
FL15-26S7
FL25-44S7
FL37-62S7
Socket: Crimp TerminationBuchse: CrimpanschlussDimensionsAbmessungen
Socket Connector without Contacts, Front ViewBuchsensteckverbinder ohne Kontakte, Frontansicht
DimensionsAbmessungen
High Density Crimp connectors are supplied without contacts. Crimp contacts must be ordered separately. See page 19 and 20. High Density Crimpsteckverbinder werden serienmäßig ohne Kontakte geliefert. Crimpkontakte müssen extra bestellt werden. Siehe Seite 19 und 20.
19DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE HD 01/2009
SpecificationsTechnische Beschreibung
Material Copper alloyMaterial KupferlegierungContact size AWG22, pin Ø 0,76 mm (Ø 0.030")Kontaktgröße AWG22, Stift Ø 0,76 mmMatching wire sizesPassende Drahtgrößen
AWG 24 - 28
P110-06V_2000
P110-06V Stamped crimp pin contact for wire size 24 - 28, plating: 0.6 µm (25 microinches) Au over Ni.
Gestanzter Crimpstiftkontakt für Drahtgröße AWG 24 - 28, Oberfläche 0,6 µm Au über Ni.
_2000 2,000 pieces on one reel. 2.000 Stück auf einer Rolle.
Wire Size (AWG) Order Number Au (over Ni) TypeDrahtgröße (AWG) Bestellnummer Au über Ni Typ
24-28 P110-01V…* ≤0,1 µm (4 microinches) Pin / Stift
24-28 P110-06V... ≥0,6 µm (25 microinches) Pin / Stift
24-28 S110-01V…* ≤0,1 µm (4 microinches) Socket / Buchse
24-28 S110-06V... ≥0,6 µm (25 microinches) Socket / Buchse
* on request / auf Anfrage
Packing Unit (Pieces) Addition to Order NumberVerpackungseinheit (Stück) Bestellnummernergänzung
300 _03002000 _200010000 _10000
Stamped Crimp ContactsGestanzte CrimpkontaktePinStift
SocketBuchse
Ordering InformationBestellinformationen
Technical DataTechnische Daten
Packing UnitVerpackungseinheit
Ordering ExampleBestellbeispiel
The stamped crimp contacts for high density D-Sub connectors are avail-able in reels of 300, 2,000 pcs or 10,000 pcs. The contacts are selectively gold plated in the mating area.
For crimping tools please see page 28.
Die gestanzten Kontakte für High Density D-Sub Steckverbinder sind auf ei-ner Rolle zu 300, 2.000 Stück oder zu 10.000 Stück lieferbar. Die Kontakte sind im Steckbereich selektiv vergoldet.
Verarbeitungswerkzeuge siehe Seite 28.
20 TECHNISCHE ÄNDERUNGEN VORBEHALTEN - MAßE IN MILLIMETER (INCHES IN KLAMMERN)HD 01/2009
The turned crimp contacts are available in standard and MIL versions. For the standard contacts, the plating is to 1.3 µm (50 microinches) gold over nickel, and for the MIL contacts it is 1.3 µm (50 microinches) gold over nickel.
For crimping tools please see top of page 26.
Die gedrehten Crimpkontakte sind in einer Standard- sowie einer MIL-Ausführung lieferbar. Bei den Standardkontakten beträgt die Oberflächenschichtstärke bis 1,3 µm Au, bei den MIL-Kontakten 1,3 µm Au, jeweils über Nickel.
Verarbeitungwerkzeuge siehe Seite 26 oben.
FK22SL-08V_0100
FK22SL-08V Crimp socket contact for wire size 24 - 28, plating 0.8 µm (31 microinches) Au over Ni.
Crimpbuchsenkontakt für Drahtgröße AWG 24 - 28, Oberfläche 0,8 µm Au über Ni.
_0100 100 pieces are packed in one bag. 100 Stück in einem Beutel verpackt.
SpecificationsTechnische Beschreibung
Material Copper alloyMaterial KupferlegierungContact Size 22, pin Ø 0,76 mm (Ø 0.030")Kontaktgröße 22, Stift Ø 0,76 mmMatching wire sizePassende Drahtgröße
AWG 24 - 28
Order Number MIL-No. Au (over Ni) TypeBestellnummer MIL-Nummer Au über Ni TypFK22PL-02V... 0,2 µm (8 microinches) Pin / StiftFK22SL-02V... 0,2 µm (8 microinches) Socket / BuchseFK22PL-08V... 0,8 µm (31 microinches) Pin / StiftFK22SL-08V... 0,8 µm (31 microinches) Socket / BuchseFK22PL-13V... 1,3 µm (51 microinches) Pin / StiftFK22SL-13V... 1,3 µm (51 microinches) Socket / Buchse
M39029/58-360 24308/13-1, M39029/58-360 1,3 µm (51 microinches) Pin / StiftM39029/57-354 24308/12-1, M39029/57-354 1,3 µm (51 microinches) Socket / Buchse
Packing Unit (Pieces) Addition to Order NumberVerpackungseinheit (Stück) Bestellnummernergänzung
100 _01001000 _10005000 _5000
Turned Crimp ContactsGedrehte Crimpkontakte
Ordering InformationBestellinformationen
Technical DataTechnische Daten
Packing UnitVerpackungseinheit
Ordering exampleBestellbeispiel
StiftPin
BuchseSocket
21DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE HD 01/2009
Stiftsteckverbinder, 15-polig, gerader Leiterplattenanschluss, rückseitig vernieteter Abstandsbolzen mit Innengewinde M3 und Länge 5,5 mm:
CT09-15P1-1432
Pin connector, 15 contacts, straight PCB termination, rear riveted threaded spacer with inner thread M3 and length 5.5 mm (0.217“):
CT09-15P1-1432
Mounting Type Self Locking SurfaceBefestigungsart Selbstsichernd Oberfläche
T — Tin-plated or zinc-platedZ —
TS • verzinnt oder verzinktZS •
AccessoriesZubehörClinch NutsEinnietmuttern
Threaded SpacersAbstandsbolzen
Stiftsteckverbinder, Einnietmutter 4-40 UNC, 9-polig
FLT09-15P7
Pin connector, clinch nut 4-40 UNC, 9 contacts
FLT09-15P7
BestellbeispielOrdering Example
Rückseitig vernietetRear Riveted
BestellbeispielOrdering Example
Frontseitig vernietetFront Riveted
The modification number for the spacers com-pletes the order number for the connector on which they are mounted.Die Modifikationsnummer des Abstandsbolzens ergänzt die Bestellnummer des Steckverbinders, in den der Abstandsbolzen eingebaut ist.
22 TECHNISCHE ÄNDERUNGEN VORBEHALTEN - MAßE IN MILLIMETER (INCHES IN KLAMMERN)HD 01/2009
Durchgangsloch Ø 3,1 mmThrough Hole Ø 3.1 mm (Ø 0.122”)
Stiftsteckverbinder, 15-polig, gerader Leiterplattenanschluss, front- und rückseitiger Abstandsbolzen mit frontseitigem Innengewinde M3 und rückseitigem Innengewinde 4-40 UNC, Länge 5,5 mm:
CT09-15P1-1779
Pin connector, 15 contacts, straight PCB termination, front and rear side spacers with front side inner thread M3 and rear side inner thread 4-40 UNC, length 5.5 mm (0.217“):
CT09-15P1-1779
Frontseitiges Innengewinde, rückseitiger Schnappbolzen(empfohlener Durchmesser der Montagebohrungen 3,0 mm ±0,1)
Frontside Inner Thread, Rearside Snap-in bolt (Recommended Diameter of the Assembly Drilling 3.0 mm ±0,1 (0.118” ±0.004))
Frontseitiges Innengewinde 4-40 UNCFrontside Inner Thread 4-40 UNC
Frontside Spacers and Rearside Spacers or Snap-in BoltsFrontseitiger Abstandsbolzen und rückseitiger Abstands- oder Schnappbolzen
Frontseitiges Innengewinde M3Frontside Inner Thread M3
BestellbeispielOrdering Example
The modification number for the spacers completes the order number for the connector on which they are mounted.Die Modifikationsnummer des Abstandsbolzens ergänzt die Bestellnummer des Steckverbinders, in den der Abstandsbolzen eingebaut ist.
Surface: Tin-plated (only when using tin-plated shells).Oberfläche: Verzinnt (Nur in Verbindung mit verzinntem Gehäuse.)
23DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE HD 01/2009
Für Leiterplatten mit 1,6 mm Stärke (empfohlener Durchmesser der Montagebohrungen 3,0 mm ±0,1)For PCBs with 1.6 mm (0.063”) Thickness (Recommended Diameter of the Assembly Drilling 3.0 mm ±0,1 (0.118” ±0.004))
Für Leiterplatten mit 2,4 mm und 3,2 mm Stärke (empfohlener Durchmesser der Montagebohrungen 3,0 mm ±0,1)
For PCBs with 2.4 mm (0.094”) and 3.2 mm (0.126”) Thickness(Recommended Diameter of the Assembly Drilling 3,0 mm ±0,1 (0.118” ±0.004))
Snap-in Bolts for PCB MountingSchnappbolzen für Leiterplattenmontage
Further Accessories are listed in our D-Sub miniature connector catalogue.Weiteres Zubehör ist in unserem D-Sub Miniatur Steckverbinder Katalog aufgeführt.
Schlüsselweite 4,5 Hex. 0.177“
Female Screw Locks F-GSCH1/5...
Sechskantbolzen F-GSCH1/5...
24 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)HD 01/2009
- nutzbar als Winkeladapter, z.B. bei beengten Einbauverhältnissen- für robuste Einsätze geeignet- sehr gute Abschirmeigenschaften- keine losen Einzel- und Montageteile, Verriegelungsschrauben vormontiert- Änderung der Anschlussrichtung durch „reverse“ montierte Kontakte- sehr gute elektrische Eigenschaften durch Verwendung von einteiligen Kontakten- für D-Sub Miniatur, High Density und Mixed Layout Steckverbindern- RoHS konform
- May be used as a bracket adaptor, e.g. in narrow installation conditions- Suitable for robust application- Very good shielding properties- No loose component or assembly parts, screws are pre-mounted- A change in the termination direction is facilitated with “reverse” mounted contacts- Very good electrical properties through the use of one-piece contacts- For D-Sub Miniatur, High-Density and Mixed Layout connectors- RoHS conform
Bestellschlüssel, Nutzung Kontaktart und Richtung der abgewinkelten Kontakte
Shielded Right Angled Adapter, ScrewableGeschirmter Winkeladapter, verschraubbar
Ordering Code, Use Contact Type and Direction of Right Angled Contacts
Special FeaturesBesondere Merkmale
FAW1PS... FAW1HPS...FAW5W1SP...
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 25HD 01/2009
BestellschlüsselOrdering Code
26 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)HD 01/2009
ShellGehäuseType / Type F FH FMInsulator Polyester, glass filled
(UL94V-0), whitePolyester, heat resistant,
glass filled (UL94V-0), naturalPolyester, glass filled (UL94V-0), green
Isolierkörper Polyester, glasfaserverstärkt (UL94V-0), weiß
Polyester, hochtemperaturbeständig,
glasfaserverstärkt (UL94V-0), natur
Polyester, glasfaserverstärkt (UL94V-0), grün
Temperature rangeTemperaturbereichShell plating (standard) Blue chromate over zinc platingGehäuseoberfläche (Standard) verzinkt und blau chromatiertShell (standard) Pin connector shell without dimplesGehäuse (Standard) Stiftsteckverbindergehäuse ohne
KontaktnoppenShell (K120) Tin plated over nickel, pin connector
shell with dimplesGehäuse (K120) verzinnt über Nickel,
Stiftsteckverbindergehäuse mit Kontaktnoppen
Shell (K121) Tin plated over nickel, socket connector shell without dimples
Gehäuse (K121) verzinnt über Nickel, Buchsensteckverbindergehäuse ohne
KontaktnoppenContact materialKontaktmaterial
-35°C to 100°C (-67°F to 212°F)-35°C bis 100°C
SteelStahl
Materials and PlatingsMaterialien und Oberflächen
Copper alloyKupfer-Legierung
Tin plated over nickelverzinnt über Nickel
Pin connector shell with dimplesStiftsteckverbindergehäuse mit Kontaktnoppen
Technical DataTechnische DatenMechanical DataMechanische Daten
Mechanical DataMechanische Daten
Mating force per signal contact≤
Steckkraft pro Signalkontakt3,4 N
Unmating force per signal contact≥
Ziehkraft pro Signalkontakt0,2 N
max. torque * 40 Ncm (0,295 ft.lb.)max. Anzugsmoment * 40 Ncm
* Not for locking screws* Nicht für Verriegelungsschrauben
Materials and PlatingsMaterialien und Oberflächen
Electrical DataElektrische Daten
Current rating at room temperature 5 A
Maximale Stromstärke bei RaumtemperaturTest voltage between 2 contacts / shell and contact
1200 V / 1 min. Prüfspannung zwischen 2 Kontakten bzw. Kontakt und GehäuseMeets transition resistance requirements per contact pair in line with DIN 41652:Erfüllt Übergangswiderstand pro Kontaktpaar nach DIN 41652 für:- Right angled contacts / abgewinkelte Kontakte ≤ 25 mΩ- Right angled contacts - 50 way / abgewinkelte Kontakte bei 50 Polen ≤ 35 mΩInsulation resistance between contacts
≥Isolationswiderstand Kontakt / Kontakt
5000 MΩ
Volume resistivity1016
Spezifischer DurchgangswiderstandΩ cm
Dielectric strength50 kV / mm
Spezifische Durchschlagsfestigkeit
Electrical DataElektrische Daten
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 27HD 01/2009
Order Number A B C DBestellnummer ±0,3 ±0,2 ±0,15 ±0,2
(±0.012) (±0.008) (±0.016) (±0.008)30,8 16,9 25,0 16,4
(1.213) (0.665) (0.984) (0.646)39,1 25,2 33,3 24,7
(1.539) (0.992) (1.311) (0.972)52,8 38,9 47,0 28,5
(2.079) (1.532) (1.850) (1.122)69,3 55,3 63,5 54,9
(2.728) (2.177) (2.500) (2.161)
Size 2 - 5 on requestGröße 2 - 5 auf Anfrage
FAW1
FAW2
FAW3
FAW4
DimensionsAbmessungen
Application ExampleEinsatzbeispiel
28 TECHNISCHE ÄNDERUNGEN VORBEHALTEN - MAßE IN MILLIMETER (INCHES IN KLAMMERN)HD 01/2009
Crimping ToolsCrimpwerkzeugeFor Stamped ContactsFür gestanzte KontakteHand Crimping Tool for Reels of 300 pcsHandcrimpzange für Rollen mit 300 Stück
Mechanical Processing for Reels with 2,000 and 10,000 pcsMaschinelle Verarbeitung für Rollen mit 2.000 und 10.000 Stück
The FCT hand crimping tool F1839 is suitable for use with stamped contacts on a reel. With this tool, contacts for wire sizes AWG 24 –28 can be easily crimped. The hand crimping tool has manual adjustment for contact alignment, a waste cutter for contacts on a reel and contact centring to ensure a fast, inexpensive crimping process, entry from left side.
Die Handcrimpzange F1839 von FCT ist für gestanzte Kontakte auf Rollen geeignet. Mit dieser Handzange können ohne großen Aufwand Kontakte für die Drahtgrößen AWG 24 – 28 verarbeitet werden. Sie besitzt eine manuelle Vorschubeinrichtung, einen Trennschneider für Bandkontakte sowie eine Kontaktzentrierung für schnelle, kostengünstige Verarbeitung, Zuführung von der linken Seite.
Order number / Bestellnummer: F1839
Entry from left side with turn round..Zuführung von der linken Seite mit Umlenkung.
The distance between the contacts has changed.Der Abstand zwischen den Kontakten hat sich geändert.
29DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE HD 01/2009
Order number: M81969/14-01Bestellnummer:
Order number: M81969/1-04Bestellnummer:
Order number: M81969/8-01Bestellnummer:
Order number: M81969/8-02Bestellnummer:
For Turned MIL- and Standard ContactsFür gedrehte MIL- und StandardkontakteHand Crimping ToolHandcrimpzange
Positioner for Socket ContactsEinsatz für Buchsenkontakte
Positioner for Pin ContactsEinsatz für Stiftkontakte
Order number: M22520/2-01Bestellnummer:
Order number: M22520/2-06Bestellnummer:
Order number: M22520/2-09Bestellnummer:
When crimping contacts it is necessary to use a corresponding insert.Beim Crimpen muss immer ein Einsatz für den entsprechenden Kontakt verwendet werden.
Insertion and Extraction ToolsEin- und AusbauwerkzeugePlastic Insertion / Extraction ToolEin- / Ausbauwerkzeug aus Kunststoff
Plastic Insertion / Extraction Tool with Metal ClipsEin- / Ausbauwerkzeug aus Kunststoff mit Metallspitzen
Insertion Tool - Metal TweezersEinbauwerkzeug - Metallpinzette
Extraction Tool - Metal TweezersAusbauwerkzeug - Metallpinzette
30 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)DS 10/2007
Waterproof Connector SystemsWasserdichte SteckverbindersystemeOrdering Code for Waterproof ConnectorsBestellschlüssel für wasserdichte Steckverbinder
UL Recognized File No. E168813
The waterproofness of the end appliance is not content of the UL-inspectionDie Wasserdichtheit des Endsystems ist nicht Inhalt der UL-Prüfung..
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 31DS 10/2007
Mechanical DataMechanische Daten
Protection standard / Schutzart DIN EN 60529 - IP 67Operating temperature rangeBetriebstemperaturbereich
-25 °C bis +70 °C (-13 °F to +158 °F)
Technical DataTechnische DatenMechanical DataMechanische Daten
Materials and PlatingsMaterialien und Oberflächen
Shell Brass, tin plated over nickelGehäuse Messing, verzinnt über NickelInsulator Thermoplastic, glass filled (UL94V-0)Isolierkörper Thermoplast, glasfaserverstärkt (UL94V-0)Metal watertight frame nickel plated zinc die-castMetalldichtrahmen Zinkdruckguss, vernickeltContact material Copper alloyKontaktmaterial Kupfer-Legierung
ContactsMachined, copper alloy, 0.3 µm (11 microinches) Au over Ni,
termination area tin platedKontakte gedreht, Kupferlegierung, 0,3 µm Au über Nickel,
Anschlussbereich verzinntWaterproofing elements SiliconeDichtelement Silikon
Materials and PlatingsMaterialien und Oberflächen
Electrical DataElektrische Daten
Electrical DataElektrische Daten
Current ratingMaximale StromstärkeTest voltage between 2 contacts / shell and contactPrüfspannung zwischen 2 Kontakten bzw. Kontakt und GehäuseInsulation resistanceIsolationswiderstandContact resistanceDurchgangswiderstand
≤ 15 m
3 A
1000 V
000 M
32 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)DS 10/2007
A
BC
Innengewinde 4-40 UNC oder M3, ca. 3.5mm tief
Frontplatte O-Ring
Inner thread 4-40 UNC or M3, ca. 3.5mm (0.138") deep
Front panel O-ring
4.5
0.1
77
6.2
0.2
44
Dichtrahmen zur Befestigung auf der Frontseite der MontageplatteWatertight frame for fixing on the front side of the mounting plate
Dichtrahmen zur Befestigung auf Rückseite der MontageplatteWaterlight frame for fixing on the rear side of the mounting plate
A
C
B
Innengewinde 4-40 UNC oder M3, ca. 3.5mm tief
Frontplatte
O-Ring
Inner thread 4-40 UNC or M3, ca. 3.5mm (0.138") deep
Front panel
O-ring
4.5
0.1
77
Connectors with Solder Pot Termination, Front MountingSteckverbinder mit Löttopfanschluss, frontseitige Montage
Waterproof Connectors with Metal Watertight FrameWasserdichte Steckverbinder mit Metalldichtrahmen
Connectors with Solder Pot Termination, Rear MountingSteckverbinder mit Löttopfanschluss, rückseitige Montage
Connectors with Solder Pot Termination, max. AWG 22Steckverbinder mit Löttopfanschluss, max. AWG 22
Number of Contacts A B C Order number pin Order Number Socket Inner ThreadPolzahl ±0,2 ±0,1 ±0,2 Bestellnummer Stift Bestellnummer Buchse Innengewinde
(±0.008) (±0.004) (±0.008) 4-40 UNC M340,0 25,0 21,0 Standard
(1.575) (0.984) (0.827) Standard48,3 33,3 21,0 Standard
(1.902) (1.311) (0.827) Standard62,0 47,04 21,00 Standard
(2.441) (1.852) (0.827) Standard78,5 63,5 21,0 Standard
(3.091) (2.500) (0.827) Standard76,1 61,1 23,2 Standard
(2.996) (2.406) (0.913) Standard
* and Modification K1444 on request* und Modifikation K1444 auf Anfrage
37-62 FWDFM37-62P-K1444* FWDFM37-62S-K1444* *
50-78
25-44
FWDFM09-15P-K1444*
FWDFM15-26P-K1444*
FWDFM25-44P-K1444*
9-15
15-26 FWDFM15-26S-K1444*
FWDFM25-44S-K1444*
*
*
*
FWDFM50-78P-K1444* FWDFM50-78S-K1444* *
FWDFM09-15S-K1444
Connectors with Solder Pot Termination, max. AWG 22Steckverbinder mit Löttopfanschluss, max. AWG 22
Number of Contacts A B C Order Number Pin Order Number Socket Inner ThreadPolzahl ±0,2 ±0,1 ±0,2 Bestellnummer Stift Bestellnummer Buchse Innengewinde
(±0.008) (±0.004) (±0.008) 4-40 UNC M340,0 25,0 21,0 Standard
(1.575) (0.984) (0.827) Standard48,3 33,3 21,0 Standard
(1.902) (1.311) (0.827) Standard62,0 47,04 21,00 Standard
(2.441) (1.852) (0.827) Standard78,5 63,5 21,0 Standard
(3.091) (2.500) (0.827) Standard76,1 61,1 23,2 Standard
(2.996) (2.406) (0.913) Standard
* and Modification K1444 on request* und Modifikation K1444 auf Anfrage
FWDRM15-26S-K1444*
FWDRM25-44S-K1444*
*
*
*
FWDRM50-78P-K1444* FWDRM50-78S-K1444* *
25-44
FWDRM9-15P-K1444*
FWDRM15-26P-K1444*
FWDRM25-44P-K1444*
9-15
15-26
FWDRM9-15S-K1444
37-62 FWDRM37-62P-K1444* FWDRM37-62S-K1444* *
50-78
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 33DS 10/2007
Dichtrahmen zur Befestigung auf der Rückseite der MontageplatteWatertight frame for fixing on the rear side of the mounting plate
Snap-in bolts to fit PCB 1.6mm (0.063"); PCB drilling ø3.0mm ±0.1 (ø0.118" ±0.04") Schnappbolzen, für PCB 1.6mm; Leiterplattenbohrung ø3.0mm ±0.1
B
AC
Innengewinde 4-40 UNC oder M3, ca. 3.5mm tief
O-Ring
Frontplatte
Inner thread 4-40 UNC or M3, ca. 3.5mm (0.138") deep
O-ring
Front panel
8.0
-
0.1
77
4.5 0.2
0.0
0.3
15
-0.0
08
0.0
00
11.4
-0.20.0
0.4
49
-0.0
08
0.0
00
Waterproof Connectors with Metal Watertight FrameWasserdichte Steckverbinder mit MetalldichtrahmenConnectors with Straight PCB TerminationSteckverbinder mit geradem Leiterplattenanschluss
Connectors with Straight PCB Termination, Ø 0.6 mm (Ø 0.024"), Pre-tinnedSteckverbinder mit geradem Einlötanschluss, Ø 0,6 mm, vorverzinnt
Number of Contacts A B C Order Number Pin Order Number Socket Inner ThreadPolzahl ±0,2 ±0,1 ±0,2 Bestellnummer Stift Bestellnummer Buchse Innengewinde
(±0.008) (±0.004) (±0.008) 4-40 UNC M340,0 25,0 21,0 Standard
(1.575) (0.984) (0.827) Standard48,3 33,3 21,0 Standard
(1.902) (1.311) (0.827) Standard62,0 47,04 21,00 Standard
(2.441) (1.852) (0.827) Standard78,5 63,5 21,0 Standard
(3.091) (2.500) (0.827) Standard76,1 61,1 23,2 Standard
(2.996) (2.406) (0.913) Standard
* and Modification K1676 on request* und Modifikation K1676 auf Anfrage
FWDRM15-26S1-K1676*
FWDRM25-44S1-K1676*
*
*
*
FWDRM50-78P1-K1676*FWDRM50-78S1-K1676* *
25-44
FWDRM9-15P1-K1676*
FWDRM15-26P1-K1676*
FWDRM25-44P1-K1676*
9-15
15-26
FWDRM9-15S1-K1676*
37-62 FWDRM37-62P1-K1676*FWDRM37-62S1-K1676* *
50-78
PCB hole pattern: see page 10-11 Leiterplattenlochbilder: siehe Seite 10-11
Socket Connector Buchsensteckverbinder
Pin ConnectorStiftsteckverbinder
Ordering Data (Waterproof D-Sub Connectors for FWH Hoods)Bestelldaten (wasserdichte D-Sub Steckverbinder für Hauben FWH)
Order Number Shell Size Number of ContactsBestellnummer Gehäusegröße Polzahl
CT09-15P-2429 1 9-15
CT15-26P-2429 2 15-26
CT25-44P-2429 3 25-44
CT37-62P-2429 4 37-62
CT50-78P-2429 5 50-78
Order Number Shell Size Number of ContactsBestellnummer Gehäusegröße Polzahl
CT09-15S-2429 1 9-15
CT15-26S-2429 2 15-26
CT25-44S-2429 3 25-44
CT37-62S-2429 4 37-62
CT50-78S-2429 5 50-78
Information / Information:D-Sub pin and socket connectors for waterproof hoods are only available for solder pot terminations.Die D-Sub Stift- und Buchsensteckver-binder für wasserdichte Hauben sind nur mit Löttopfanschluss verfügbar.
Modification on request Modifikation auf Anfrage2 locking screws 2 St. Verriegelungsschrauben
2 washers 2 St. Unterlegscheiben
1 front seal 1 St. Frontdichtung
2 distance bolts 2 St. Abstandsbolzen
Packing UnitVerpackungseinheit
For information on FWH hoods, please refer to our hoods catalogue.Informationen zur Haube FWH entneh-men Sie bitte unserem Haubenkatalog.
34 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)DS 10/2007
Front seals are used to seal off the connection area of the signal contacts (combination FWD... with High Density D-Sub connectors ...-2429) and are mounted in male connectors (see drawing). They can also be used with standard D-Sub connectors.Frontdichtungen dienen zur Abdichtung des Steckbereiches der Signalkontakte (Kombination FWD... mit High Density D-Sub Steckverbindern ...-2429) und werden im Stiftstecker montiert (siehe Zeichnung). Sie sind auch mit Standard D-Sub Steckverbindern verwendbar.
Front Seal Frontdichtung
Accessories for Pin ConnectorsZubehör für Stiftsteckverbinder
Order Number Shell Size Number of ContactsBestellnummer Gehäusegröße Polzahl
F1043-1F 1 9-15
F1043-2F 2 15-26
F1043-3F 3 25-44
F1043-4F 4 37-62
F1043-5F 5 50-78
Material SpecificationMaterialbeschreibung
Material Silicone Material SilikonThickness 1,1
Dicke (0.04)
O-ring glued to frameO-Ring mit Dichtrahmen verklebt
Metal watertight frame FWDFMMetalldichtrahmen FWDFM
Illustration:Mounting on the outer side of a machine with type FWDFM09-15P (please also see page 14).Abbildung:Montage auf der Geräteaußenseite bei Typ FWDFM09-15P (siehe auch Seite 14).
Front MountingFrontseitige Montage
Rear MountingRückseitige MontageIllustration and drawing:Mounting on the inside of a machine with type FWDRM09-15P (please also see page 14).Abbildung und Zeichnung:Montage auf der Geräteinnenseite bei Typ FWDRM09-15P (siehe auch Seite 14).
Distance Bolts AvailableLieferbare Abstandsbolzen
Inner and Outer Thread Order NumberInnen- und Außengewinde Bestellnummer
M3 F-GSCH1/5-K8344-40 UNC F-GSCH1/5-K835
Spacer (for shell thickness 1.5 mm (0.059“) with thinner front panel, washers are required, which are included in the delivery.)Abstandsbolzen (für Gehäusewandstärke 1,5 mm, bei geringerer Stärke sind Unterlegscheiben notwendig, die im Lieferumfang enthalten sind.)
O-ring glued onto frameO-Ring am Dichtrahmen verklebt
Front panelFrontplatte
Metal watertight frame FWDRMMetalldichtrahmen FWDRM
35DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE HD 01/2009
Order Number IndexBestellnummern - IndexC
CT09-15P ______________ 8CT09-15P1 _____________ 10CT09-15P1-1432 _________ 21CT09-15P1-1779 _________ 22CT09-15P5L222 _________ 12CT09-15P5-L228 _________ 12CT09-15P5-L229 _________ 12CT09-15S ______________ 9CT09-15S1 _____________ 11CT09-15S5-L222 _________ 13CT09-15S5-L228 _________ 13CT09-15S5-L229 _________ 13CT15-26P ______________ 8CT15-26P1 _____________ 10CT15-26P5L222 _________ 12CT15-26P5-L228 _________ 12CT15-26P5-L229 _________ 12CT15-26S ______________ 9CT15-26S1 _____________ 11CT15-26S5-L222 _________ 13CT15-26S5-L228 _________ 13CT15-26S5-L229 _________ 13CT25-44P ______________ 8CT25-44P1 _____________ 10CT25-44P5L222 _________ 12CT25-44P5-L228 _________ 12CT25-44P5-L229 _________ 12CT25-44S ______________ 9CT25-44S1 _____________ 11CT25-44S5-L222 _________ 13CT25-44S5-L228 _________ 13CT25-44S5-L229 _________ 13CT37-62P ______________ 8CT37-62P1 _____________ 10CT37-62P5L222 _________ 12CT37-62P5-L228 _________ 12CT37-62P5-L229 _________ 12CT37-62S ______________ 9CT37-62S1 _____________ 11CT37-62S5-L222 _________ 13CT37-62S5-L228 _________ 13CT37-62S5-L229 _________ 13CT50-78P ______________ 8CT50-78P1 _____________ 10CT50-78P7 _____________ 17CT50-78S ______________ 9CT50-78S1 _____________ 11CT50-78S5-L228 _________ 13CT50-78S5-L229 _________ 13CT50-78S7 _____________ 18
F
F1043-1F ______________ 34F1043-2F ______________ 34F1043-3F ______________ 34F1043-4F ______________ 34F1043-5F ______________ 34F1839 _________________ 28FAW1 _________________ 27FAW1HPS... ____________ 24FAW1HPSR _____________ 24FAW1HSPR _____________ 24FAW1PS _______________ 24FAW1PS... _____________ 24FAW1SP _______________ 24FAW2 _________________ 27FAW3 _________________ 27FAW4 _________________ 27FAW5W1SP... ___________ 24F-GSCH1/5-K834 _________ 34F-GSCH1/5-K835 _________ 34FK22PL-02V... ___________ 20FK22PL-08V... ___________ 20FK22PL-13V... ___________ 20FK22SL-02V... ___________ 20FK22SL-08V... ___________ 20FK22SL-08V_0100 ________ 20FK22SL-13V... ___________ 20FL09-15P7 _____________ 17FL09-15S7 _____________ 18FL15-26P7 _____________ 17FL15-26S7 _____________ 18FL25-44P7 _____________ 17FL25-44S7 _____________ 18FL37-62P7 _____________ 17FL37-62S7 _____________ 18FLT09-15P7 _____________ 21FWDFM09-15P __________ 34FWDFM09-15P-K1444 _____ 32FWDFM09-15S-K1444 ____ 32FWDFM15-26P-K1444 _____ 32FWDFM15-26S-K1444 ____ 32FWDFM25-44P-K1444 _____ 32FWDFM25-44S-K1444 ____ 32FWDFM37-62P-K1444 _____ 32FWDFM37-62S-K1444 ____ 32FWDFM50-78P-K1444 _____ 32FWDFM50-78S-K1444 ____ 32FWDRM09-15P __________ 34FWDRM9-15P1-K1676 ____ 33FWDRM9-15P-K1444 _____ 32FWDRM9-15S1-K1676 ____ 33FWDRM9-15S-K1444 _____ 32FWDRM15-26P1-K1676 ___ 33
FWDRM15-26P-K1444 ____ 32FWDRM15-26S1-K1676 ___ 33FWDRM15-26S-K1444 ____ 32FWDRM25-44P1-K1676 ___ 33FWDRM25-44P-K1444 ____ 32FWDRM25-44S1-K1676 ___ 33FWDRM25-44S-K1444 ____ 32FWDRM37-62P1-K1676 ___ 33FWDRM37-62P-K1444 ____ 32FWDRM37-62S1-K1676 ___ 33FWDRM37-62S-K1444 ____ 32FWDRM50-78P1-K1676 ___ 33FWDRM50-78P-K1444 ____ 32FWDRM50-78S1-K1676 ___ 33FWDRM50-78S-K1444 ____ 32
M
M22520/2-01 ___________ 29M22520/2-06 ___________ 29M22520/2-09 ___________ 29M39029/57-354 _________ 20M39029/58-360 _________ 20M81969/1-04 ___________ 29M81969/8-01 ___________ 29M81969/8-02 ___________ 29M81969/14-01 __________ 29
P
P110-01V... _____________ 19P110-06V... _____________ 19
S
S110-01V... _____________ 19S110-06V... _____________ 19