All our Eterna Emergency Exit Signage comply with current ... · IP20 LED 1.4W NON MAINTAINED...

EMERGENCY EXIT SIGNAGE GUIDANCE

All our Eterna Emergency Exit Signage comply with current Exit Signage Regulations

using the Signs Directive format.

4 Our Eterna legends fulfil the legal and technical requirements for exit signs

4 Extensions to existing installations should be made in the same format as originally installed

4 Up arrow option available for all models

For installations requiring ISO 7010 format legends contact our sales team for more information

PAG

E 28

ww

w.e

tern

a-lig

htin

g.co

.uk

LED

Em

erge

ncy

Ligh

ting

LED EMERGENCYLIGHTING

All our Emergency Lighting products comply with the BS EN 60598-2-22 Emergency Lighting Standard.

All products in this section have 5 year warranties available

ETERNAPRO 5 YEAR WARRANTYn LED Emergency Battens + High Output Versions Page 30n LED 5ft Twin Slimline Emergency Ceiling Fitting Page 30n LED Single Or Twin Weatherproof Fittings Page 30n LED Colour Selectable Carina Lights Page 31n LED Circular Or Square Utility Lights Page 32n LED Full, Eyelid Or Grill Aluminium Wall Lights Page 33n LED Non Maintained Emergency Downlight Page 34n LED Maintained Recessed Emergency Fittings Page 34n LED Emergency Hanging Exit Sign Light Page 35n LED IP65 Twinspot Emergency Light Page 35n LED IP20 Emergency Twinspot Fitting Page 35n Emergency Battery Pack For RDL Range & LED Panels Page 35n LED Slim Maintained Emergency Exit Box Page 36n LED Maintained Emergency Exit Box Sign Page 36n LED Maintained / Non Maintained Emergency Bulkheads Page 36

EternaPro

Extended WarrantyAvailable on application

PAG

E 29

ww

w.e

tern

a-lig

htin

g.co

.uk

LED

Em

erge

ncy

Ligh

ting

5FT LED TWIN SLIMLINE EMERGENCY CEILING FITTINGWhite / 50W / 4000K / 5000 lm / 40,000 hrs

EternaPro


A slim, modern design LED ceiling fitting which offers a more stylish alternative to traditional battens. Where a more aesthetically pleasing fixture is desirable this versatile and elegant light source is suitable for commercial, retail and domestic applications. • Polycarbonate and aluminium construction• Push terminal connections• Pre-wired for easy installation• Minimum 3 hour functionality in emergency mode• LED glows green in standby mode and super

bright white light in the event of a mains failure• 118 lumens in emergency mode• See PAGE 44 for non emergency version• M.O.M: 1 / O.P.Q: 6 12

7mm

1503mm (5ft) 43mm

Emergency module glows green in standby mode

Bright white glow in emergency mode

Code

ELEGAN5EM3

IP20 LED 5FT / 6FT BATTENS + HIGH OUTPUT VERSIONSALL FITTINGS: White / 4200K / 35,000 hrs / IP20

• Pressed steel body and polycarbonate diffuser• LED tray can be removed from the housing for

easy installation• 20mm knockout glands at each end for through

wiring options• BESA box mounting • Gear tray retaining straps• Push terminal connections• Pre-wired for easy installation• LED glows green in standby mode and super

bright white light in the event of a mains failure• Minimum 3 hour functionality in emergency

mode• 118 lumens in emergency mode• See PAGE 43 for non emergency versions• M.O.M: 1 / O.P.Q: 6

5FT (1460mm)6FT (1730mm)

60mm

73m

m

Code Version Wattage LuminaireLumens

STANDARD OUTPUT LED BATTENS

LBAT5FTEM3 5FT 38W 4800 lm

LBAT6FTEM3 6FT 48W 6000 lm

HIGH OUTPUT LED BATTENS

LBAT5HOEM3 5FT 65W 7900 lm

LBAT6HOEM3 6FT 70W 8600 lm

IP65 LED SINGLE/TWIN 5FT EMERGENCY WEATHERPROOF FITTINGSBOTH FITTINGS: Grey / 5000K / 30,000 hrs / IP65

Superb one for one replacement for traditional fluorescent fixtures. • Polycarbonate housing and diffuser• Multiple fixing options - supplied with surface

mounting brackets and suspension hooks• Gear tray retaining strap for easy installation• IES files available• Stainless steel clips • Push-fit terminal block• 3 hour duration maintained operation: facility

for non-maintained mode or remote switching• See PAGE 45 for non emergency versions• Single = M.O.M: 1 / O.P.Q: 6• Twin = M.O.M: 1 / O.P.Q: 4

Code Version Wattage LuminaireLumens

WPLEDEM351 Single 5ft 30W 3000 lm

WPLEDEM352 Twin 5ft 60W 6000 lm

1560mm (5ft) Single:90mmTwin:

135mm

95m

m EternaPro

Extended Warranty

Available on application

60mm 46mm

50m

m

Emergency BoxEternaPro

Extended Warranty


Full photometric data available to enable lighting designs. Light output is equivalent or superior to traditional fluorescent battens.

PAG

E 30

ww

w.e

tern

a-lig

htin

g.co

.uk

LED

Em

erge

ncy

Ligh

ting

IP65 LED EMERGENCY COLOUR TEMPERATURE SELECTABLE FITTINGSALL FITTINGS: 17W / 35,000 hrs / IP65 / A Rated

3100K • 1250 lm 4200K • 1350 lm 6400K • 1300 lm

Code ColourSTANDARD EMERGENCY

CSLEDCREM3 Polished ChromeCSLEDWHEM3 White

ON/OFF MICROWAVE SENSOR + EMERGENCY

MSCSLCREM3 Polished ChromeMSCSLWHEM3 White10% STEP DIM (CORRIDOR MODE)

MICROWAVE SENSOR + EMERGENCY

SDCSLCREM3 Polished ChromeSDCSLWHEM3 White

EternaPro


ALL FITTINGS:• Colour temperature selectable - options of 3100K, 4200K & 6400K easily

set by a dip switch on the gear tray• Full circular LED array • Polycarbonate construction • IP65, ceiling or wall mounted• Plug in connector between the terminal block and the gear tray. Terminal block is located on the

base, allowing for easy wiring and the gear tray to be removed during installation• See PAGE 21 for non emergency versions• M.O.M: 1 / O.P.Q: 8

EMERGENCY VERSIONS:• 3 hour maintained mode as standard which can also be configured for non maintained operation

STANDARD ON/OFF MICROWAVE SENSOR VERSIONS:• Adjustable microwave sensor: with options to adjust 2-50 lux or disable, detection range 10-100%

and time 5 secs - 15 mins• The microwave sensor is discreetly placed behind the diffuser: making it unobtrusive so there is no

compromise to the appearance of the fitting or the room design

STEP DIM (CORRIDOR MODE) MICROWAVE SENSOR VERSIONS:• Operation at 100% light level after last presence detection, reducing to 10% light output after

installer selected time delay• Delay time to 10% operation adjustable: 5 sec 30 sec 1 min 5 min 15 min 30 min• 30~150° detection angle• 12~18m adjustable detection range: 100% 75% 50% 25% 10%• Daylight sensitivity adjustment: 2Lux 5Lux 10Lux 30Lux 50Lux Photocell Disable• Detection is possible through doors, glass panels and thin walls

110m

m

325mm

= ON = OFF

Standard shown

PAG

E 31

ww

w.e

tern

a-lig

htin

g.co

.uk

LED

Em

erge

ncy

Ligh

ting

IP65 LED EMERGENCY UTILITY FITTINGS WITH OPAL / PRISMATIC DIFFUSERALL FITTINGS: 18W / 4000K / 35,000 hrs / IP65 / A+ Rated

• Hinged gear tray• Captive fixing screws• Four 20mm cable entries on the side and one to the rear• See PAGE 22 for non emergency versions

EMERGENCY VERSIONS:• 3 hour maintained mode as standard which can also be

configured for non maintained operation

MULTI-FUNCTION MICROWAVE SENSOR VERSIONS:• Detection sensitivity adjustable - 10/50/75/100%• Daylight sensor adjustable - 5/15/50 Lux/Disable• Mounting height - maximum 6mtr• Detection zone - maximum 16mtr diameter x 6mtr height• Detection angle - 150° (wall mounted), 360° (ceiling mounted)

MULTI-FUNCTION MICROWAVE SENSOR WITH 3 INSTALLER OPTIONS: • Standard On/Off Mode: operation at 100% light level then off

after last presence detection. Operation on time can be set at 5 seconds/90 seconds/3 minutes/10 minutes

• “Corridor Mode”: operation at 100% light level after last presence detection which can be set at 5 seconds/90 seconds/ 3 minutes/10 minutes, then continuous operation at 10% light level

• “Corridor” & Off Mode: operation at 100% light level after last presence detection which can be set at 5 seconds/ 90 seconds/3 minutes/10 minutes, then operation at 10% light level which can be set at 30 seconds or 10 minutes, then off

High output, energy saving utility LED wall / ceiling fixtures with standard, emergency & multi-function microwave control versions. Both opal & clear versions are available for either smooth diffused effect or maximum light output. Diffusers are supplied not fitted to bases and fully captive diffuser fixing screws are utilised to save installation time. Multi-function microwave versions provide the best in flexibility & energy saving options.

Code Version Diffuser +Lumens

CIRCULAR FITTINGS

CIROPALEM3 Standard Emergency Opal1400 lmCIROPALMW3 Multi-function MW Sensor + Emergency

CIRPRISEM3 Standard Emergency Prismatic1600 lmCIRPRISMW3 Multi-function MW Sensor + Emergency

SQUARE FITTINGS

SQOPALEM3 Standard Emergency Opal1400 lmSQOPALMW3 Multi-function MW Sensor + Emergency

SQPRISEM3 Standard Emergency Prismatic1600 lmSQPRISMW3 Multi-function MW Sensor + Emergency

CIR:

Ø 2

90m

mSQ

U: 2

50m

m

100mm

Prismatic circular diffuser

FULLCIRCULAR/ SQUARE

LED ARRAY

Opal square diffuser

Captive fixing screws

EternaPro

Extended Warranty


Push fit terminal block

Opal circle

Prismatic square Prismatic circle

Opal square

Multi-function MW Sensor

PAG

E 32

ww

w.e

tern

a-lig

htin

g.co

.uk

LED

Em

erge

ncy

Ligh

ting

IP65 LED EMERGENCY FULL, EYELID OR GRILL ALUMINIUM WALL LIGHTSALL FITTINGS: 18W / 4200K / 35,000 hrs / IP65 / A+ Rated

Code Colour Version LuminaireLumens

FULL

ALEM3BKFUL BlackEmergency

1400 lmALEM3WHFUL White

ALMF3BKFUL Black Multi-function MW Sensor + EmergencyALMF3WHFUL White

EYEL

ID

ALEM3BKEYE BlackEmergency

1300 lmALEM3WHEYE White

ALMF3BKEYE Black Multi-function MW Sensor + EmergencyALMF3WHEYE White

GRI

LL

ALEM3BKGRI BlackEmergency

1400 lmALEM3WHGRI White

ALMF3BKGRI Black Multi-function MW Sensor + EmergencyALMF3WHGRI White

Modern and robust design with options including full, eyelid and grill case, black and white finish, and standard, emergency, multi function

microwave and multi function microwave emergency.

Full

Eyelid

Grill

ALEM3WHGRI shown

ALEM3BKFUL shown ALEM3WHEYE shown

Ø 365m

m

FULL: 100mmEYE: 120mm

GRILL: 130mm

• Die-cast aluminium base and bezel • Polycarbonate diffuser• Full circular/eyelid LED array• Plug in connector between the terminal block and the gear

tray. Terminal block is located on the base, allowing for easy wiring and the gear tray to be removed during installation

• Four 20mm cable entries• Tamper-proof, captive, stainless steel allen key screws• See PAGE 23 for non emergency versions• M.O.M: 1 / O.P.Q: 1

EMERGENCY VERSIONS:• 3 hour maintained mode as standard which

can also be configured for non-maintained operation

MULTI-FUNCTION MICROWAVE SENSOR VERSIONS:• Detection sensitivity adjustable - 10/50/75/100%• Daylight sensor adjustable - 5/15/50 Lux/Disable• Mounting height - maximum 6mtr• Detection zone - maximum 16mtr diameter x 6mtr height• Detection angle - 150° (wall mounted), 360° (ceiling mounted) MULTI-FUNCTION MICROWAVE SENSOR WITH 3 INSTALLER OPTIONS: • Standard On/Off Mode: operation at 100% light level then off

after last presence detection. Operation on time can be set at 5 seconds/90 seconds/3 minutes/10 minutes

• “Corridor Mode”: operation at 100% light level after last presence detection which can be set at 5 seconds/90 seconds/ 3 minutes/10 minutes, then continuous operation at 10% light level

• “Corridor” & Off Mode: operation at 100% light level after last presence detection which can be set at 5 seconds/ 90 seconds/3 minutes/10 minutes, then operation at 10% light level which can be set at 30 seconds or 10 minutes, then off

EternaPro

Extended Warranty


Standard push fit terminal block

PAG

E 33

ww

w.e

tern

a-lig

htin

g.co

.uk

LED

Em

erge

ncy

Ligh

ting

IP20 LED 1.4W NON MAINTAINED EMERGENCY DOWNLIGHT

LED MAINTAINED RECESSED EMERGENCY FITTINGS

Matt Silver or White Trim / 1.4W

BOTH FITTINGS: White / 6500K / 18,000 hrs

This LED compact recessed emergency light is ideal for use in corridors, stairwells and other places that require a smart, discreet emergency unit. • Aluminium construction • Compact design• Matt silver and white trims included• Pre-wired for easy installation• LED glows green in standby mode and super

bright white light in the event of a mains failure• Excellent alternative to a converted downlight• Minimum 3 hour functionality in emergency mode• 118 lumens in emergency mode• 32mm diameter hole cut out size• M.O.M: 1 / O.P.Q: 20

45mm 33mm

2 XCOLOUR

TRIMSINCL.

Actual size: Ø 45mm

EternaPro


EternaPro


Low energy alternative to standard emergency exit fittings • Pressed steel body• Hinged gear tray: easy installation

and maintenance• Hole cut out size: 115mm x 320mm• LEDREM3 = M.O.M: 1 / O.P.Q: 10• LEDMDDEM3 = M.O.M: 1 / O.P.Q: 6• RLGDLR / RLGDUP = M.O.M: 1 / O.P.Q: 25

LEDREM3• Polycarbonate reeded diffuser: unobtrusive

solution for discreet emergency lighting• Facility for non-maintained mode• Facility for remote switching

LEDMDDEM3• Slotted pressed steel panel housing

polycarbonate down arrow exit legend for unobtrusive exit path designation

90m

m

410mm 135mm

320mm 110mm

260m

m

180m

m

Code Version Wattage Lumens

LEDREM3 Reeded Diffuser 5.20W 162 lm

LEDMDDEM3 Edge Lit Panel & Diffuser 3.5W -

Up & left / right legend available for LEDMDDEM3

RLGDLR

RLGDUP

LEDMDDEM3

LEDREM3

Code

LDLEM3

Download the SPACING TABLE from: www.eterna-lighting.co.uk/product/ldlem3/

LEDREM3

LEDMDDEM3

Emergency charge light

Emergency module glows green in standby mode

Bright white glow in emergency mode

All legends comply with current regulations

PAG

E 34

ww

w.e

tern

a-lig

htin

g.co

.uk

LED

Em

erge

ncy

Ligh

ting

IP65 LED TWINSPOT EMERGENCY FITTING

IP20 LED EMERGENCY TWINSPOT FITTING

White / 7W (2 x 3W) / 3500K / 441 lm / 30,000 hrs / IP65

White / 3.4W / 6000K / 405 lm / IP20

• Twin 3W LED projectors: provide superior light output to traditional twinspot fittings

• Horizontally and vertically adjustable heads, 180° rotation across the horizontal plane

• IP65 rating utilising high quality polycarbonate enclosure: for installation in wet or dusty environments

• Individual indicator to show ‘Lamps Healthy’ and ‘Charge’

• Reduced battery capacity requirement: allows a more compact design reducing the weight dramatically compared to traditional products facilitating easier installation

• Minimum 3 hour non-maintained functionality in emergency mode

• M.O.M: 1 / O.P.Q: 6

295m

m

300mm 70mm

190m

m

125mm

75m

m

60mm

Code

LEDTWNSPOT

EternaPro

Extended Warranty


310m

m

170m

m11

0mm

50mm

55mm280mm

Reduced battery capacity requirement allows a more compact design reducing the weight dramatically compared to traditional products facilitating easier installation. • Polycarbonate construction• Individual indicator to show ‘Lamps Healthy’

and ‘Charge’• Horizontally and vertically adjustable heads,

180° rotation across the horizontal plane• 3 hour non-maintained operation• M.O.M: 1 / O.P.Q: 6

LED EMERGENCY HANGING EXIT SIGN LIGHTWhite / 2.3W / 6000K / 171 lm / 25,000 hrs

• Remote connection box complete with adjustable length suspension cable (max 80cm)

• Supplied with a double-sided down arrow exit legend - left/right & up arrow legends available separately

• 3 hour maintained mode as standard which can also be configured for non-maintained or remote switched operation

• Viewing distance 29m• Test button and LED charge light• SIGNLEDEM3: M.O.M: 1 / O.P.Q: 6• SIGNLGD/UP: M.O.M: 1 / O.P.Q: 100 172mm

Up to 800mm

Max.

55mm340mm

335mm 8mm

45mm

SIGNLGD SIGNLGDUP

Code

SIGNLEDEM3

Code

TSPOTLIP20

EMERGENCY BATTERY PACK FOR ETERNA LED FITTINGSWhite / 65W Max / IP20

• Enables Eterna LED commercial downlights (RDL range on PAGE 49) and LED panel lights (See PAGE 26-27) to be converted into emergency luminaires, rated at 65W max

• 3 hours duration in emergency mode• Push fit plug and socket: allows quick & easy

installation• Facility for non maintained mode and for remote

switching• LED charge light• Control gear can be removed from the housing:

allows use in installations with smaller hole cut out• M.O.M = 1 / O.P.Q = 1

Code

EBPM3

EternaPro


EternaPro

Extended Warranty


250mm 55mm

110m

m

Download the EASY STEP BY STEP WIRING GUIDE from: www.eterna-lighting.co.uk/product/ebpm3/


EternaPro


PAG

E 35

ww

w.e

tern

a-lig

htin

g.co

.uk

LED

Em

erge

ncy

Ligh

ting

IP20 SLIM LED MAINTAINED EMERGENCY EXIT BOX

IP20 LED MAINTAINED EMERGENCY EXIT BOX SIGN

White / 5.2W / 30,000 hrs / IP20

White / 4W / 30,000 hrs / IP20

An aesthetically pleasing, low energy, ultra slim alternative to conventional exit boxes • Ultra slim design: excellent solution where a

more compact fitting is required• 3 hour maintained mode as standard which

can also be configured for non maintained operation

• Diffuser on base: for added downward illumination of exit path

• Interchangeable down, up, left & right arrow exit legends included

• Long life energy efficient LED light source eliminates lamp replacement cycle without compromising panel visibility distance

• Facility for remote switching• LED charge light• For wall mounting only• 34 metres viewing distance• M.O.M: 1 / O.P.Q: 10 393mm

193m

m27mm

Code

EBLSLIMM

Down, up, left & right legends included

EternaPro


• Steel construction• 3 hour maintained mode as standard which

can also be configured for non maintained operation

• Facility for remote switching• Interchangeable polycarbonate down

arrow exit legend included• Diffuser on base: for added downward

illumination of exit path• Long life energy efficient LED light source

eliminates lamp replacement cycle without compromising panel visibility distance

• LED charge light and battery test button• Viewing distance: 34m• EXIT3MLED = M.O.M: 6 / O.P.Q: 6 • Legends = M.O.M: 1 / O.P.Q: 100

EBLGDL

EBLGDR

EBLGDU

Full range of alternative legend directional panels available

Code

EXIT3MLED

Low energy alternative to standard emergency exit signs.

390mm

192m

m

60mm

EternaPro


IP65 LED MAINTAINED / NON MAINTAINED EMERGENCY BULKHEADSBOTH FITTINGS: White / 6000K / 30,000 hrs / IP65

392mm

346mm

45mm

150m

m

105m

m

• Polycarbonate construction • Internal or external use• 20mm gland entries as standard• Minimum 3 hour functionality in emergency mode• High output LEDs with bright white light • Semi recessed fixing: allows a more discreet installation option• Dedicated self adhesive legend pack included with a combination of

symbols: allows multiple exit path designation options (LGDSET)• Fitting / Frame = M.O.M: 1 / O.P.Q: 12• LGDSET = M.O.M: 12 / O.P.Q: 12

EMLED3M: • Facility for remote switching and non-maintained mode• 235 lm when connected to mains,150 lm when connected to battery

BULKHEAD FRAME (BULKFRAME):• For use with emergency bulkheads• Pressed steel construction • Spring retaining clips• Semi recessed fixing: allows a more discreet installation option• Hole cut out size: 350mm x 117mm

70mm355mm

110m

m

Hinged gear tray & push fit terminal block: allows for quicker and easier installation and maintenance

Low energy alternative to standard fluorescent emergency bulkheads.

Code Version Wattage Lumens

EMLED3M Maintained 7W 235/150 lm

EMLED3NM Non Maintained 2W 150 lm

EternaPro





PAG

E 36

ww

w.e

tern

a-lig

htin

g.co

.uk

LED

Em

erge

ncy

Ligh

ting

All our Eterna Emergency Exit Signage comply with current ... · IP20 LED 1.4W NON MAINTAINED...

Documents

Transcript of All our Eterna Emergency Exit Signage comply with current ... · IP20 LED 1.4W NON MAINTAINED...