LED - light- and connection technology

Spotlight connectors for COBs fromWith integrated reflector interface

All in one...our LED Spotlight connectors

2 2017-08This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016

The Advantages at a glance

• Compatibletostandardisedspotlightmodulsastoholepatternand

externaldiameter

• Serviceable–easyexchangeofLEDboard

• Highlightefficiencybytheuseofhighreflectivematerial

• Twodefinedreflectorinterfacesformetalorplasticreflectors

3 2017-08 This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016

COB assembly made easy

Zhaga hole patternFixationviastandardscrewsandlockingwashers

Solder free connectionUsingpushwireter-minals.Wiringcanbearrangedtooneside.

Internal reflector interfaceForplasticandmetalreflectors

Insert, Twist, DoneSimplefixationviaTwist&Lock

Inverse-polarity protectionThepolarityisclearlyvisi-blefromtheoutside,evenwhentheCOBinserted

Pre-centring:SlidetheCOB...

Pre-centering:...betweentheflexibleCOBholders.

Secure FixationTheCOBsaresecurelyheldinplaceduringtheassemblyprocess

4 2017-08This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016

Overview of different prefixation types

Light source Connector Features

SLEG6LES10(13.5x13.5mm)

Ø40mmBJB47.319.6060

Ø40mmBJB47.319.6294

Ø40mmBJB47.319.6295

SLEG6LES15,17(19x19mm)

Ø50mmBJB47.319.2021

Ø50mmBJB47.319.2023

Ø50mmBJB47.319.2025

Fixingelements,0.5mm²

COBholders,0.75mm²

Positioningwindow,0.5mm²

COBholders,0.5mm²

Positioningwindow,0.75mm²

COBholders,0.5mm²

5 2017-08 This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016

Overview of different prefixation types

Light source Connector Features

SLEG6LES15,17(19x19mm)

Ø50mmBJB47.319.2026

Ø40mmBJB47.319.6024

SLEG6LES19,23(31x31mm)

--- ---

Fixingelements,0.75mm²

COBholders,0.5mm²

LED - Lighting and connection technology

Spotlight connectors for COB LED modules from Tridonic

6 2017-08This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016

47.319

pkg.

504

wt.

3 g

part no.

47.319.6060.50

With integrated reflector interface

Easy pre-assembly by LED fixing lugs

Connector for COBs SLE G3 LES 10/G5 LES 6/10/11 und G6 LES 10 mm from Tridonic

Screw fixing

Housing: PBTContacts: CuSn

Rating: 3A / 150 VDC

Approval: additional cULus

• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289

0.5 mm² 0.5 mm² 14

pkg.

420

wt.

3 g

part no.

47.319.6024.50

With integrated reflector interface

Easy pre-assembly by LED fixing lugs

Connector for COBs SLE G4/G5 LES15 and SLE G6 LES17 from Tridonic

Screw fixing

Housing: PBTContacts: CuSn

Rating: 3A / 150 VDC

Approval: additional cULus

• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289

0.5 mm² 0.5 mm² 14

pkg.

420

wt.

3 g

part no.

47.319.6025.50

With integrated reflector interface

Easy pre-assembly by LED fixing lugs

Connector for COBs SLE G4/G5 LES15 and SLE G6 LES17 from Tridonic

Screw fixing

Housing: PBTContacts: CuSn

Rating: 3A / 150 VDC

Approval: additional cULus

• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289

0.75 mm² 0.75 mm² 14

LED - Lighting and connection technology

Spotlight connectors for COB LED modules from Tridonic

7 2017-08 This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016

47.319

pkg.

420

wt.

5 g

part no.

47.319.6294.50

With integrated reflector interface

Easy pre-assembly by LED fixing lugs

Connector for COBs G4 LES10 from Tridonic

Screw fixing

Housing: PBTContacts: CuSn

Rating: 3A / 150 VDC (VDE)

• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289

0.5 mm² 0.5 mm² 14

pkg.

420

wt.

5 g

part no.

47.319.6295.50

With integrated reflector interface

Easy pre-assembly by LED fixing lugs

Connector for COBs G4 LES10 from Tridonic

Screw fixing

Housing: PBTContacts: CuSn

Rating: 3A / 150 VDC (VDE)

• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289

0.75 mm² 0.75 mm² 14

pkg.

504

wt.

5 g

part no.

47.319.2021.50

With integrated reflector interface

Easy assembly by vision panels

Connector for COBs SLE G4/G5 LES15, G6 LES15 and SLE G6 LES17 from Tridonic

Screw fixing

Housing: PBTContacts: CuSn

Rating: 3A / 150 VDC

Approval: additional cULus

• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289

0.5 mm² 0.5 mm² 14

LED - Lighting and connection technology

Spotlight connectors for COB LED modules from Tridonic

8 2017-08This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016

47.319

pkg.

504

wt.

5 g

part no.

47.319.2023.50

With integrated reflector interface

Easy assembly by vision panels

Connector for COBs SLE G4/G5 LES15, G6 LES15 and SLE G6 LES17 from Tridonic

Screw fixing

Housing: PBTContacts: CuSn

Rating: 3A / 150 VDC

Approval: additional cULus

• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289

0.75 mm² 0.75 mm² 14

pkg.

420

wt.

5 g

part no.

47.319.2025.50

With integrated reflector interface

Easy pre-assembly by LED fixing lugs

Connector for COBs SLE G4/G5 LES15, G6 LES15 and SLE G6 LES17 from Tridonic

Screw fixing

Housing: PBTContacts: CuSn

Rating: 3A / 150 VDC

Approval: additional cULus

• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289

0.5 mm² 0.5 mm² 14

pkg.

420

wt.

5 g

part no.

47.319.2026.50

With integrated reflector interface

Easy pre-assembly by LED fixing lugs

Connector for COBs SLE G4/G5 LES15, G6 LES15 and SLE G6 LES17 from Tridonic

Screw fixing

Housing: PBTContacts: CuSn

Rating: 3A / 150 VDC

Approval: additional cULus

• Screw fixing: for screws M3 and locking washer• Max. torque for screw fixing 0.5 Nm• Strip length: 7-1 mm• Polarity of LED must be observed• Specifications of LED manufacturer must be observed• VDE-Reg. No. E289

0.75 mm² 0.75 mm² 14

LED - Lighting and connection technology

9 2017-08 This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016

Reflectors for Spotlight connector series

47.940

pkg.

150

wt.

8 g

part no.

47.940.-311.56

Reflector

For use with Spotlight connectors 47.319.6060, 47.319.6101, 47.319.6200 and 47.319.6180

Reflector: PC

Beam angle characteristic: Flood

• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer

14

pkg.

150

wt.

8 g

part no.

47.940.-312.56

Reflector

For use with Spotlight connectors 47.319.6060, 47.319.6101, 47.319.6200 and 47.319.6180

Reflector: PC

Beam angle characteristic: Medium

• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer

14

pkg.

150

wt.

8 g

part no.

47.940.-313.56

Reflector

For use with Spotlight connectors 47.319.6060, 47.319.6101, 47.319.6200 and 47.319.6180

Reflector: PC

Beam angle characteristic: Spot

• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer

14

LED - Lighting and connection technology

10 2017-08This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016

Reflectors for Spotlight connector series

47.950

pkg.

160

wt.

8 g

part no.

47.950.-301.56

Reflector

For use with Spotlight connectors 47.319.2xxx and Spot-, Downlight modules 32.120.xxxx

Reflector: PC

Beam angle characteristic: Spot

• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer

14

pkg.

160

wt.

8 g

part no.

47.950.-302.56

Reflector

For use with Spotlight connectors 47.319.2xxx and Spot-, Downlight modules 32.120.xxxx

Reflector: PC

Beam angle characteristic: Medium

• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer

14

pkg.

160

wt.

10 g

part no.

47.950.-303.56

Reflector

For use with Spotlight connectors 47.319.2xxx and Spot-, Downlight modules 32.120.xxxx

Reflector: PC

Beam angle characteristic: Flood

• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer

14

LED - Lighting and connection technology

11 2017-08 This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016

Reflectors for Spotlight connector series

47.950

pkg.

1

wt.

10 g

part no.

47.950.-304.56

Reflector

For use with Spotlight connectors 47.319.2xxx and Spot-, Downlight modules 32.120.xxxx

Reflector: PC

Beam angle characteristic: Spot

• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer

14

pkg.

1

wt.

10 g

part no.

47.950.-305.56

Reflector

For use with Spotlight connectors 47.319.2xxx and Spot-, Downlight modules 32.120.xxxx

Reflector: PC

Beam angle characteristic: Medium

• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer

14

pkg.

1

wt.

10 g

part no.

47.950.-306.56

Reflector

For use with Spotlight connectors 47.319.2xxx and Spot-, Downlight modules 32.120.xxxx

Reflector: PC

Beam angle characteristic: Flood

• Reflector can only be used by screw fixing the spotlight connector with dome headed screws and locking washer

14

LED - Lighting and connection technology

12 2017-08This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016

Reflectors for Spotlight connector series

47.950

pkg.

1

wt.

3 g

part no.

47.950.-401.85

Diffusor plate L2

For use with reflectors 47.950.-30x with Ø74 mm

Diffusor plate: PC

14

pkg.

1

wt.

3 g

part no.

47.950.-402.85

Diffusor plate L6

For use with reflectors 47.950.-30x with Ø74 mm

Diffusor plate: PC

14

pkg.

1

wt.

3 g

part no.

47.950.-403.85

Diffusor plate L12F

For use with reflectors 47.950.-30x with Ø74 mm

Diffusor plate: PC

14

LED - Lighting and connection technology

13 2017-08 This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016

Reflectors for Spotlight connector series

47.950

pkg.

1

wt.

3 g

part no.

47.950.-404.85

Diffusor plate oval

For use with reflectors 47.950.-30x with Ø74 mm

Diffusor plate: PC

14

14 2017-08 This page is only valid in connection with the general information and notes of the complete catalogue, issue 2016

General information

LED - Lighting and connection technology

Single push wire terminals

For solid conductors within the cross sectional range stated(In this example 0.5 mm2)When regulations deviate from IEC, other cross sec-tions are possible (e. g. UL / CSA: cable 18 AWG).

Temperature rating T 110ThemaximumoperatingtemperatureisgivenbyaTmarking.Thisisthemaximumoperatingtemperatureforwhichtheproductisdesigned.

LED connector

Additional informationFurther information about the products shown on this page can be found on the pages shown within this symbol.

Allarticlesinthiscataloguehavebeendesignedaccordingtotheappropriatenationalandinternationalstandards(VDE/IEC).Thechoiceofproductandcorrecttechnicalembodimentisthesoleresponsibilityoftheuser.Exactinformationcanbeobtaineduponrequest.Wereservetherighttomodifyproducts.

Explanation of the symbols shown on the product pages.

CAD-Data in 2D or 3D format available

For tinned wire ends within the cross sectional range stated(In this example 0.25 - 0.5 mm2)When regulations deviate from IEC, other cross sec-tions are possible (e.g. UL / CSA: cable 18 AWG).

0.25 - 0.5 mm2

0.5 mm2

14

BJB GmbH & Co. KG · Werler Str. 1 · 59755 Arnsberg · GermanyTelefon +49 2932 982-0 · Fax +49 2932 982-8201info@bjb.com · www.bjb.com