all designs

Some OF

MAHMOUD ESMAIEL DESIGNS

NOTE: All LOGOS used here for only completing the design and not officially by any means and also to show that this design can't be any other name except these

Contents Of Designs

1 - Mercedes-Benz SL-JET

2- BMW i-TINY CONCEPT

3- AUDI R80

4- Porsche Carrera SP

SSSLLL---JJJEEETTT

The GERMAN FIGHTER

designed by : Mahmoud Esmaiel

NOTE: Mercedes Logo & AMG Logo used here for only completing the design and not officially by

any means and also to show that this design can't be any other name except Mercedes-Benz AMG

- Motivation of This design

The primary motivation for this design is to create a car bearing the logo of luxury, "Mercedes-Benz star"

Because the Mercedes Benz deserves to product a car with specifications, which makes it the fastest car in the world.

- Based on

This Design based on "SL" Models , and also the front grille adapted from "MERCEDES STYLE COUPE".

- Disadvantages of last Models

- The last models of 'SL" such as SLS and SLR McLaren from my point of view , i think that only one disadvantage that these Autos weren't the fastest cars comparing with other supercars such as " Bugatti Veron , Agera R "

- The New Idea

- Using new technique in Aerodynamics by removing side mirrors and exchange it with cameras placed in rear pockets , and the place of mirrors will be mini wings.

- The method of work

1st idea

-Use Mini wings and Spoiler as improver of aerodynamic, when the slope to the right and to the left at high speeds (As Jet Wings).

- When the vehicle exceeds 180 km\h, ECU orders the rotating sensor in mirrors to spin on its axis of rotation in response to rotation of the steering wheel automatically.

- When the driver turns the steering wheel to right , the right mirror goes up to increase the resistance of air at the right side and the left one goes horizon to increase the flow of air in the left side to make the turning method been smooth and easy as shown in next figure

2nd idea

- Use Mini wings & Spoiler as an air brake and gives the vehicle more stable by adding more weight by air pressing

- When the vehicle exceeds 220 km\h, ECU orders the rotating sensor in both mirrors and spoiler to spin on its axis of rotation about 15º in response to high speed. as shown in next figure

- When the vehicle exceeds 320 km\h, ECU orders the rotating sensor in both mirrors and spoiler to spin on its axis of rotation about 2º . as shown in next figure

- When the driver press on Brake pedal , ECU orders the rotating sensor in both mirrors and spoiler to spin on its axis of rotation about 55º , (the same method in Bugatti Veron 16.4) , as

shown in next figure

- The Advantages of "SL-JET" Model

1- Mini Wings and separated rear spoiler act like a sail in the vehicle steering, and to be an air brakes in case of brake (All at high speed)

2- Light body weight all made from Aluminum.

3- Two cameras located in the rear pocket under the rear lamp to act as mirror , using these cameras to have a full image of road behind the car.

4- Cockpit is very similar to Fighter JET, it's completely made from Laminated glass to allow for the possibility of full vision in every angle.

5- extra rear brake light located in spoiler works as a flash light to be eye-catching significantly.

6- this vehicle can competes in Formula 1 races , and also could be driven in the cities and roads.

7- the Mini wings and Spoiler also work as solar panels to provide electrical power for internal and external lights such as "head lamps , rear lamps , dash board lights .. etc"

- Disadvantages of "SL-JET" Model

1- One Seat , which not allows to more than passenger to ride the car "the driver only".

2- more consumption of fuel at high speeds.

http://www.youtube.com/watch?v=VTKLjtcbnn4

- 3D Screen Shots -

Thank You for your interesting

Name : Mahmoud Esmaiel

Email: [email protected]

Tel: 017675306233

Address : c/o Helga Bauer

Bonselsweg 8

85764 Oberschleißheim

BMW i-TINY CONCEPT


NOTE: BMW and i logo used here for only completing the design and not officially by any means and

also to show that this design can't be any other name except BMW i


The primary motivation for this design is to create a small car to be more effective in the heavy traffic environment specially in Europe.

- Based on

This Design based on "BMW i" Models .

- The New Idea

- Anew small size of BMW Cars

- Using Small solar panel on the roof to generate enough

power which allows to interior electrical devices to work.

The Advantages of "i-TINY" Model

1- Electrical Engine Unpolluted environment

2- Light body weight chassis made from Aluminum .

3- Exchanging Mirror glasses with cameras.

4- Solar Panel generates enough power to interior.

5- extra rear brake light works as a flash light to be eye-catching significantly.

6-its coast will be not expensive.

7- this vehicle will reduce the noise.

- Disadvantages of "i-TINY" Model

1- Will not allow to have more than 2 large persons and 2 small or 2 kids in rear seats

2- its solar panel will not be very useful in cold and cloudy weather , but it will be very useful in warm weather.

3- Will not help on the long distances because off its small engine which be useful in city streets.

- 3D of "i-TINY" Model -




Tel: 017675306233


Bonselsweg 8



NOTE: AUDI Logo used here for only completing the design and not officially by any means and also to

show that this design can't be any other name except Audi


The primary motivation for this design is to create Audi with strange and wonderful shape

- Based on

This Design based on "R8" Model.

- The New Idea

- Using new technique by creating cabin separated between the rear and front parts

- The Advantages of " R80 " Model

1- rear spoiler act like a sail in the vehicle steering, and to be an air brakes in case of brake (All at high speed)

2- Light body weight all made from Aluminum.

3- Two Mirror new location.

4- Cockpit is very similar to Fighter JET, it's completely made from Laminated glass to allow for the possibility of full vision in every angle.

5- extra rear brake light works as a flash light to be eye-catching significantly.

6- this vehicle can competes in Formula 1 races , and also could be driven in the cities and roads.

- Disadvantages of "R80 " Model

1- Two Seats , which not allows to more than 2 passengers to ride the car.

2- more consumption of fuel at high speeds.

- Blueprint -

http://www.youtube.com/watch?v=VTKLjtcbnn4

- 3D Screen Shots -




Tel: 017675306233


Bonselsweg 8



NOTE: Porsche logo used here for only completing the design and not officially by any means and also

to show that this design can't be any other name except Porsche


The primary motivation for this design is to create flexible separated vehicle

- Based on

This Design based on Porsche Carrera GT.

- The Basic Idea

- every part of the vehicle is independent and all parts are connected with each other. (as shown)

The Advantages of "Carrera SP" Model

1- Flexibility on the road , because of separated parts of car.

2- Light body weight chassis made from Aluminum.

3- Increase the exploitation of the air flow on the vehicle's body to keep the engine cool at high speeds , by using extra air entrances.

4- brake lights work as a flash light to be eye-catching significantly.

- 3D of " Carrera SP " Model -




Tel: 017675306233


Bonselsweg 8


all designs

Documents

Transcript of all designs