ALKCO EXIT/DIRECTIONAL F1.2 EDGE-GLoe EXIT ......1 or 2 F8T5 lamps are supplied installed in...
Transcript of ALKCO EXIT/DIRECTIONAL F1.2 EDGE-GLoe EXIT ......1 or 2 F8T5 lamps are supplied installed in...
-- ---
h_________.__.___________.___._.___._
ALKCO F1.2EXIT/DIRECTIONALEDGE-GLoe EXITFLUORESCENTRGLO/SGLO-FLSERIES
· Attractive chamfered acrylic panel with floatingletters
· Bottom edge panels reflectorized to facilitateeven illumination.
· Proprietary AlkcoLoc hanger bars lock ontoT-bar without additional hardware.
· recessed sign installs under 5 minutes.· Meets UL924, NEC, OSHA and NFPA Life
Safety Code illumination requirements.
· A practical energy efficient, low maintenanceexit sign...the ultimate "less is more" designstatement from the originator of edge-lightedexit signs.
Suspended ceiling installation system
Wiring access door Loc bar hangers
EXIT.8 Watt Fluorescent lamps Clear background!
green letters
ALKCO A DMsion of JJI Ughting Group, Inc. .Toll Free: 1 866-50ALKCO or visit www.alkco.com
---
EXIT/DIRECTIONALEDGE-GLOIDEXITFLUORESCENTRGLO/SGLO-FL SERIES
F1.2 ALKCO
TYPE
RECESSED HOUSING
SPECIRCAT10NS
HOUSINGIINSTALLAT10NRecessedhousings: 20 gaugegalvanized steel with wiringaccess plate to allow electricalconnection without removal ofwireway. Standard housing issuitable for use in plenum ceilings.Vertically adjustable hangerbracket with proprietary Alkco-Locbar hangers lock onto T-bar or canbe supported from buildingstructure. Bar hangers rotate 90 o.Surface housings: 20 gauge coldrolled steel with universal mountingcapability. KO pattern in top andend accommodates standard1-device outlet box cover forinstallation without a canopy. Top,end and back KO pattern allowsmounting with supplied canopylmounting plate over 4" octagonaloutlet boxes. Standard finish iswhite polyester resin powder coat.
PANELFACEPLATES
Injection molded clear acrylicpanels with chamfered edges.Bottom edge is hot-stamped witha silverized reflector for uniformillumination. Message is reverse silkscreened onto panels. Panels arepre-installed into a die-formed 18gauge cold rolled steel face platewhich attaches to housing withtorsion springs. There are noexposed fasteners on faceplate.Standard faceplate finish is whitepolyester-resin powder coat.
SURFACE HOUSING
ELECTRICALA.AMPSOne or two 8 watt pre-heatnormal power factor ballasts.On two lamp models, lampsare individually ballasted toallow one lamp to be wired toa separate emergency circuit.1 or 2 F8T5 lamps are suppliedinstalled in fixtures. 120V isstandard, 277V optional.Emergency Battery Back-upProvides 2 hours of illuminationin event of power failure.Standard features include:120V/277V dual-tap, Solid statetemperature compensatingvariable float charger; long-lifesealed lead-acid battery; line-latched low voltage discon-nect; voltage sensitivebrownout circuit and AC lock-out. Battery carries 3-yearreplacement/7-year pro-ratawarranty.
Labels/ComplianceUUCUL924,IBEW. Complieswith NEC, OSHA and NFPA101Life Safety Code illuminationrequirements. Red on whitesigns with Chicago codearrows are approved byChicago Fire Departmentand Chicago Departmentof Buildings.
ELECTRICALDATA# of lamps
Input Watts 120V277V
Max.Amps 120V277V
Power Factor 120V277V
AC1 29.3 18.5
13.5 27.14 .27.15 .30.57 .60.32 .33
ACIDC1 2
12 20.8 (float mode)12 20
.18 .29 (hi-charge).07 .11.57 .59.63 .66
OPTIONAL
RECESSEDWALLMOUNT PANEL
PANEL/FACEPLATES
SURFACEFLUORESCENTHOUSINGSSGLO-FL1 1-lamp, AC onlySGLO-FL2 2-lamps, AC onlySGLO-FLX1 1-lamp wI batterySGLO-FLX2 2-lamps wI batteryHOUSING OPTIONS1277 277 volt ( AC signs only; battery signs are 120/277V
dual-tap)Dual circuit relay (AC only signs)Black stem & canopy for surface housingWhite stem & canopy for surface housing
171/8"17 1/8"171/8"171/8"
4"4"4"
3 3/4"3 3/4"5 1/2"5 1/2"4"
12CIBSCIWSC
PANELIFACEPLATEASSEMBLY(orderingexample:PGL01-RWS-R)#ofPanelsPGL01PGL02
-Chevrons-R (chevron right)
-L (chevron Left)
-D (double chevron)
-LR (universal left& right for double-
sided signs)ForChicagoCodestylepanels300arrows,addan.A"toabovedesignationsonRWSpanels.Example:ARforarrowright.NOTE:Panelheightincreasesto9"
and/or surface housino cataloo #
ALKCO . 11500 Melrose Avenue Franklin Park,lL 60131-8139 Phone(847)451-0700 FAX(847)451-7512 . FormF1.2 11/05
--- --
ORDERINGINFORMATION
Catalog # Description L W D
RECESSED FLUORESCENT HOUSINGSRGLO-FL1 1-lamp,AC onIV 161/4" 3" 3 1/2" --....RGLO-FL2 2-lamps, AC only 161/4" 3" 3 1/2"RGLO-FLX1 1-lamp wI battery 161/4" 3" 5 1/2"RGLO-FLX2 2-lamps wI battery 161/4" 3" 5 1/2"