Update of Booster Alignment & Magnet Moves February 29, 2012
Alignment work update S. Margetis
description
Transcript of Alignment work update S. Margetis
![Page 1: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/1.jpg)
1
Alignment work update
S. Margetis
BNL Workshop July 9-10, 2013
![Page 2: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/2.jpg)
2
Q: Is it a Sector thing or individual Ladder ?
A: Rotations seem common but shifts are not
Survey geometry with calibrations was used in production
![Page 3: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/3.jpg)
![Page 4: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/4.jpg)
4
Q: Is there stability over two different runs?
A: Rotations seem to be stable, shifts <100um but significant…need to understand cause
Survey geometry with calibrations was used in production
![Page 5: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/5.jpg)
![Page 6: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/6.jpg)
6
Q: Is SURVEY geometry better than ideal?
A: In several aspects YES. Also quality is better. Still significant deviations from in-situ geometry exist
![Page 7: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/7.jpg)
Un-Calibrated/Ideal Calibrated/Survey
![Page 8: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/8.jpg)
![Page 9: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/9.jpg)
Effect of masking/calibrations more obvious
![Page 10: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/10.jpg)
![Page 11: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/11.jpg)
![Page 12: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/12.jpg)
SURVEY appears to have this right
![Page 13: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/13.jpg)
13
Q: Is Alignment procedure working?
A: YES. Even after a single iteration a big improvement is seen
Ideal geometry with no calibrations was used in production
![Page 14: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/14.jpg)
14
Day 152 – First Pass Alignment Update
• With the ~600K events I got from Long, I ran the alignment code and got precise estimates (see slide-2)
• Produced the “corrected” geometry and re-run the full BFC with updated geometry – about 50K event so far
![Page 15: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/15.jpg)
15
SECTOR 4____________________________________________________________________________________________________|dX mkm |dY mkm |dZ mkm |alpha mrad |beta mrad |gamma mrad |Comment______________________________________________________________________________________________ | -100 | 300 | 2900 | 0 | 0. | -0 | Average for PXL sector 4 Ladder 1______________________________________________________________________________________________ | -20 | 150 |2970 | 0 | 0. | 0 | Average for PXL sector 4 Ladder 2______________________________________________________________________________________________ | -100 | 350 |2700 | 0 | 0. | -0 | Average for PXL sector 4 Ladder 3____________________________________________________________________________________________________| -200 | +400 | 3000 | 0 | 0 | 0 | Average for PXL Ladder 4____________________________________________________________________________________________________
SECTOR 7
______________________________________________________________________________________________ 1500 | 2100 | 3000 | -10 | 10 | 80 | Ladder 1_____________________________________________________________________________________________|2350 |1150 |2900 | -15 | 10 | 80 | Average for PXL sector 7 Ladder 2____________________________________________________________________________________________________|2330 |1800 |2440 | -15 | 20 | 80 | Average for PXL Ladder 3____________________________________________________________________________________________________| 2230 | 2710 | 2570 | -10. | 20 | 80 | Average for PXL Ladder 4
FIRST PASS ESTIMATED Corrections (angles [only] need a minus sign)
!!!
![Page 16: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/16.jpg)
Sector 7 ladder 1 (inner)
|dX mkm |dY mkm |dZ mkm |alpha mrad |beta mrad |gamma mrad ||1500 | 2100 | 3000 | -10 | 10 | 80
BEFORE AFTER
AFTER - z residualAFTER - du residual
Most offset and slope gone!
![Page 17: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/17.jpg)
Sector 7 ladder 2 (outer)
|dX mkm |dY mkm |dZ mkm |alpha mrad |beta mrad |gamma mrad ||2350 |1150 |2900 | -15 | 10 | 80 |
![Page 18: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/18.jpg)
Sector 7 ladder 1 (inner) GLOBAL after BFC rerun (50K)
BEFOREAFTER
![Page 19: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/19.jpg)
Sector 7 ladder 1 (inner) GLOBAL after BFC rerun
BEFOREAFTER
![Page 20: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/20.jpg)
Sector 7 ladder 1 (inner) GLOBAL after BFC rerun
BEFOREAFTER
![Page 21: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/21.jpg)
21
Q: Any strange things that call for deeper tests ?
A: Several
Survey geometry with calibrations was used in production
![Page 22: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/22.jpg)
22
• Inner ladder inversion?
![Page 23: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/23.jpg)
23
OK
![Page 24: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/24.jpg)
24
??????
![Page 25: Alignment work update S. Margetis](https://reader035.fdocuments.us/reader035/viewer/2022062520/56816487550346895dd65ecf/html5/thumbnails/25.jpg)
25
Summary – To Do list
• Simulation: – Individual ladder rots/transls
• rots in progress– Thorough tests is a must
• Code/methods synchronization• Multi-pass chain implementation/establishment• Align, monitor time-dependences, understand
Clean/Calibrated Data a MUST for proper Alignment