Alignment Tools
7
GC Alignment Tools MANU CODE 169 DUPLEX ALIGNMENT SCREWDRIVER Material: Delrin. Shaft: Long end 7 /32˝ (5.5 mm) dia., 6˝ (15.2 cm) long; short end 5 /32˝ (4 mm) dia., 1˝ (2.5 cm) long. Ends: 1 /32˝ thick screwdriver tip (Both Ends). Total Length: 7˝ (17.7 cm). Cat. No. Net Price 00-2520-0000 $2.53 ANTI-STATIC ALIGNMENT TOOL KIT Kit contains all nine anti-static alignment tools. The wide range of tip styles and sizes assures that the user will have a tool for adjusting or aligning any conven- tional component. Supplied with pocket storage case. KIT CONTAINS 1 EACH: AS-5004-0000 adjustment screwdriver, AS-8275-0000 combination aligner, AS- 76-0000 steel tip duplex aligner, AS-8605-0000 small hex and screwdriver, AS- 06-0000 hex and tip tool, AS-8608-0000 mini potentiometer and trimmer tool, AS-9300-0000 double ended hex tool, AS-9302-0000 3-in-1 hex core tool, AS- 9400-0000 square and hex tool. Cat. No. Net Price AS-5007-0000 $12.70 ADJUSTMENT SCREWDRIVER Material: Conductive Nylon. Shaft: 1 /4˝ (6.3mm) dia., 7˝ (17.7 cm) long. Ends: 1 /32˝ thick screwdriver tip (Both ends). Total Length: 7˝ (17.7 cm). Cat. No. Net Price AS-5004-0000 $2.57 SMALL ENDS HEX & SCREWDRIVER Hex: 0.050˝ (1.25 mm). Material: Conductive Nylon. Ends: hex (allen) steel 0.050˝ (1.25 mm), 3 /32˝ (2.4 mm) long; 3 /32˝ (2.4 mm) wide steel screwdriver tip with 3 /32˝ (2.4 mm) shank, 1 3 /4˝ (4.4 cm) long shank. Total Length: 5 3 /16˝ (13.2 cm). Cat. No. Net Price AS-8605-0000 $3.61 DOUBLE ENDED HEX TOOL Hex: 5 /64˝ (0.078˝ -2 mm). Material: Conductive Nylon. Ends: 1 /4˝ long hex, 0.096˝ dia. shaft, 3 /8˝ long hex, undercut (0.068˝ dia.) shaft to reach bottom slugs in coils. Total Length: 5˝ (12.7 cm). Cat. No. Net Price AS-9300-0000 $2.82 COMBINATION ALIGNER Material: Conductive Nylon. Shaft: long end 1 /8˝ (3.2 mm) dia., 2 1 /2˝ (6.3 cm) long; short end 7 /32˝ (5.5 mm) dia., 2 7 /16˝ (6.2 cm) long. Ends: 1 /32˝ thick screw- driver tip (long end); 1 /8˝ (3.2 mm) wide steel tip, recessed 1 /16˝ (short end). Total Length: 4 15 /16˝ (12.5 cm). Cat. No. Net Price AS-8275-0000 $3.15 HEX & SPECIAL TIP TOOL Hex: 0.100˝ (2.5 mm). Material: Conductive Nylon. Ends: Flat screwdriver tip (0.027˝ thick-.095˝ wide), followed by 0.100˝ hex; 0.100˝ hex, 7 /32˝ long, undercut shaft to reach bottom slugs in coils. Total Length: 5 3 /32˝ (12.9 cm). Cat. No. Net Price AS-8606-0000 $2.55 3-IN-1 HEX CORE TOOL Hex 5 /64˝ (0.078˝ -2 mm) and 0.100˝ (2.5 mm) Material: Conductive Nylon. Ends: small (0.078˝ ) hex followed by 0.100 hex; 0.100˝ hex ( 3 /8˝ long), undercut shaft to reach bottom slugs in coils. Total Length: 5 3 /8˝ (13.7 cm). Cat. No. Net Price AS-9302-0000 $2.82 STEEL TIPPED DUPLEX ALIGNER Material: Conductive Nylon. Shaft: 7 /32˝ (5.5 mm) dia., 6 1 /8˝ (15.5 cm) long. Ends: 1 /8˝ (3.2 mm) wide steel tip; 1 /8˝ (3.2 mm) wide steel tip, recessed 1 /16˝ . Fits no. 6 slotted stud. Total Length: 6 1 /8˝ (15.5 cm). Cat. No. Net Price AS-8276-0000 $2.99 MINIATURE POTENTIOMETER- TRIMMER ADJUSTMENT TOOL Material: Conductive Nylon. Shaft: 1 /4˝ (6.3 mm) dia. 4 15 /16˝ (12.5 cm) long. Ends: .085˝ (2.2 mm) wide steel tip; .085˝ (2.2 mm) wide steel tip, recessed .040˝ . Total Length: 4 15 /16˝ (12.5 cm). Cat. No. Net Price AS-8608-0000 $3.24 1294 PARTS INDICATED WITH A LEAF l ARE CONSIDERED RoHS JULY 2006 COMPLIANT BASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING. PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE TAXES NOT INCLUDED
Transcript of Alignment Tools
GC Alignment ToolsMANU
CODE
169
DUPLEX ALIGNMENT SCREWDRIVERMaterial: Delrin. Shaft: Long end 7⁄32˝ (5.5 mm) dia., 6˝ (15.2 cm) long; short end5⁄32˝ (4 mm) dia., 1˝ (2.5 cm) long. Ends: 1⁄32˝ thick screwdriver tip (Both Ends).Total Length: 7˝ (17.7 cm).
Cat. No. Net Price
00-2520-0000 $2.53
ANTI-STATIC ALIGNMENT TOOL KITKit contains all nine anti-static alignment tools. The wide range of tip styles andsizes assures that the user will have a tool for adjusting or aligning any conven-tional component. Supplied with pocket storage case. KIT CONTAINS 1 EACH:AS-5004-0000 adjustment screwdriver, AS-8275-0000 combination aligner, AS-76-0000 steel tip duplex aligner, AS-8605-0000 small hex and screwdriver, AS-06-0000 hex and tip tool, AS-8608-0000 mini potentiometer and trimmer tool,AS-9300-0000 double ended hex tool, AS-9302-0000 3-in-1 hex core tool, AS-9400-0000 square and hex tool.
Cat. No. Net Price
AS-5007-0000 $12.70
ADJUSTMENT SCREWDRIVERMaterial: Conductive Nylon. Shaft: 1⁄4˝ (6.3mm) dia., 7˝ (17.7 cm) long. Ends:1⁄32˝ thick screwdriver tip (Both ends). Total Length: 7˝ (17.7 cm).
Cat. No. Net Price
AS-5004-0000 $2.57
SMALL ENDS HEX & SCREWDRIVERHex: 0.050˝ (1.25 mm).
Material: Conductive Nylon. Ends: hex (allen) steel 0.050˝ (1.25 mm), 3⁄32˝ (2.4mm) long; 3⁄32˝ (2.4 mm) wide steel screwdriver tip with 3⁄32˝ (2.4 mm) shank, 13⁄4˝(4.4 cm) long shank. Total Length: 53⁄16˝ (13.2 cm).
Cat. No. Net Price
AS-8605-0000 $3.61
DOUBLE ENDED HEX TOOLHex: 5⁄64˝ (0.078˝ -2 mm).
Material: Conductive Nylon. Ends: 1⁄4˝ long hex, 0.096˝ dia. shaft, 3⁄8˝ long hex,undercut (0.068˝ dia.) shaft to reach bottom slugs in coils. Total Length: 5˝(12.7 cm).
Cat. No. Net Price
AS-9300-0000 $2.82
COMBINATION ALIGNERMaterial: Conductive Nylon. Shaft: long end 1⁄8˝ (3.2 mm) dia., 21⁄2˝ (6.3 cm)long; short end 7⁄32˝ (5.5 mm) dia., 27⁄16˝ (6.2 cm) long. Ends: 1⁄32˝ thick screw-driver tip (long end); 1⁄8˝ (3.2 mm) wide steel tip, recessed 1⁄16˝ (short end). TotalLength: 415⁄16˝ (12.5 cm).
Cat. No. Net Price
AS-8275-0000 $3.15
HEX & SPECIAL TIP TOOLHex: 0.100˝ (2.5 mm).
Material: Conductive Nylon. Ends: Flat screwdriver tip (0.027˝ thick-.095˝ wide),followed by 0.100˝ hex; 0.100˝ hex, 7⁄32˝ long, undercut shaft to reach bottomslugs in coils. Total Length: 53⁄32˝ (12.9 cm).
Cat. No. Net Price
AS-8606-0000 $2.55
3-IN-1 HEX CORE TOOLHex 5⁄64˝ (0.078˝ -2 mm) and 0.100˝ (2.5 mm)
Material: Conductive Nylon. Ends: small (0.078˝ ) hex followed by 0.100 hex;0.100˝ hex (3⁄8˝ long), undercut shaft to reach bottom slugs in coils. Total Length:53⁄8˝ (13.7 cm).
Cat. No. Net Price
AS-9302-0000 $2.82
STEEL TIPPED DUPLEX ALIGNERMaterial: Conductive Nylon. Shaft: 7⁄32˝ (5.5 mm) dia., 61⁄8˝ (15.5 cm) long. Ends:1⁄8˝ (3.2 mm) wide steel tip; 1⁄8˝ (3.2 mm) wide steel tip, recessed 1⁄16˝ . Fits no. 6slotted stud. Total Length: 61⁄8˝ (15.5 cm).
Cat. No. Net Price
AS-8276-0000 $2.99
MINIATURE POTENTIOMETER-TRIMMER ADJUSTMENT TOOL
Material: Conductive Nylon. Shaft: 1⁄4˝ (6.3 mm) dia. 415⁄16˝ (12.5 cm) long. Ends:.085˝ (2.2 mm) wide steel tip; .085˝ (2.2 mm) wide steel tip, recessed .040˝ .Total Length: 415⁄16˝ (12.5 cm).
Cat. No. Net Price
AS-8608-0000 $3.24
1294 PARTS INDICATED WITH A LEAF lARE CONSIDERED RoHS JULY 2006 COMPLIANTBASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING.PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE T AXES NOT INCLUDED
GC Alignment ToolsMANU
CODE
169
SQUARE & HEX END TOOLHex: 0.100˝ (2.5 mm) Square: 1⁄16˝ (1.6 mm).
Material: Conductive Nylon. Ends: 0.100˝ (2.5 mm) hex, 3⁄8˝ (9.5 mm) long; 1⁄16˝(0.062˝ -1.6 mm) square, 1⁄32˝ (0.1 cm) long. Total Length: 51⁄16˝ (12.8 cm).
Cat. No. Net Price
AS-9440-0000 $1.71
DOUBLE ENDED EXTRA LONG SCREWDRIVERMaterial: Fiberglass. Shaft: 5⁄32˝ (4 mm) dia., 16˝ (40.6cm) long. Ends: 1⁄32˝ thickscrewdriver tip (Both Ends). Total Length: 16˝ (40.6cm).
Cat. No. Net Price
00-9294-0000 $3.97
G-C ALIGNMENT SCREWDRIVERLow inductance metal tip screw driver made of plastic material—strong,durable, completely insulated. Very popular all-around alignment tool.
Cat. No. Description Net Price
00-5000-0000 7⁄32˝ Diam. × 6˝ Tool $2.97
G-C NO-METAL INSULATINGADJUSTMENT SCREW DRIVER
Made of natural Delrin. Indispensable for aligning all-wave sets. Will give longservice. Ends can be re-ground. ICA type #1039.
Cat. No. Description Net Price
00-5004-0000 7˝ long $2.07
G-C DUPLEX NO-METAL ALIGNMENT SCREW DRIVERMade of natural Delrin—1⁄4˝ blade on one end and 1⁄8˝ blade on other. 6˝ long.Very handy dual purpose alignment screw driver. Ends can be re-ground andused again.
Cat. No. Net Price
00-5009-0000 $2.92
G-C K-TRAN TOOLSpecially designed for K-Tran and I.F. transformers. Made of natural plastic,screw driver on both ends. 6˝ long, 5⁄32˝ Delrin tip, 1⁄8˝ metal tip.
Cat. No. Net Price
00-5097-0000 $2.92
G-C TELEVISION CHANNEL TUNING TOOLEspecially designed for television receivers, for making channel adjustments,etc. Completely insulated, non-metallic tool with long 1⁄8˝ narrow blade. Overalllength of tool, including handle, approximately 71⁄4˝ . Made of bone fibre, 1⁄8˝shaft diameter.
Cat. No. Net Price
00-8195-0000 $3.22
G-C TELEVISION CORE ALIGNERFor Motorola, Stewart-Warner, Belmont and other sets using Stackpole or otherstud type cores that are not slotted. Made of plastic material 6˝ long with a milledsteel insert on one end and a thin screw driver blade on other end. 6˝ long, 7⁄32˝shaft dia.
Cat. No. Net Price
00-8271-0000 $2.49
G-C TELEVISION ZENITHUNIVERSAL ALIGNER
Specially designed for certain Zenith and other sets. Made of natural Delrin(white) and plastic handle, it has a thin Delrin screw driver on one end and arecessed extra thin spring steel tip on the other end. 5˝ long, 1⁄8˝ shaft dia. 1⁄4˝handle.
Cat. No. Net Price
00-8275-0000 $2.55
G-C TELEVISION DUPLEX ALIGNERAn all-purpose TV aligner for trimmers and I.F. transformers. Made of plasticmaterial with extra thin spring steel tips, specially made for television. One endhas a projected tip, the other end has a recessed tip. ICA type #1015.
Cat. No. Net Price
00-8276-0000 $2.42
G-C TELEVISION “SHOR TY” DUPLEX ALIGNERSpecially made for trimmer and I.F. transformers where space does not permitthe use of a longer tool. Made of plastic material with extra thin hardened springsteel tips. One end has a projected metal tip, the other end is recessed. 21⁄2˝long, 7⁄32˝ shaft diameter.
Cat. No. Net Price
00-8277-0000 $2.92
G-C ZENITH TELEVISION WRENCH AND ALIGNERDelrin plastic molded special tool made specially for Zenith TV sets. One endhas a plastic hex wrench and the other end a small screw driver tip. 57⁄16˝ long,.100 dia. hex wrench, .109 screw driver diameter.
Cat. No. Net Price
00-8282-0000 $2.19
1295PARTS INDICATED WITH A LEAF lARE CONSIDERED RoHS JULY 2006 COMPLIANTBASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING.PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE T AXES NOT INCLUDED
GC Alignment ToolsMANU
CODE
169
G-C CAPACITOR AND TUNER ADJUSTING TOOLNew adjuster for trimmer capacitors, sealed capacitors, and miniature L.C.Tuners. Made of white Delrin with .050˝ hex head one end and screw driver tipon the other end. Overall length of tuner is 51⁄8˝ .
Cat. No. Description Net Price
00-8605-0000 Adjusting Tool $2.92
G-C ZENITH-ADMIRAL NYLON HEX WRENCHNew nylon hex wrench alignment tool for Zenith, Admiral and other sets. Hexwrench on both ends, one end under-cut so it will reach bottom slugs in ironcoils.
Cat. No. Description Net Price
00-8606-0000 5˝ Wrench $1.6900-8606-000L 11˝ Wrench 2.53
G-C ALIGNMENT TOOLHandy, all-plastic alignment tool, easy to align and adjust TV sets, radio sets,etc. Made of clear plastic, 5˝ long × 3⁄8˝ diameter. One end tip is recessed.
Cat. No. Net Price
00-8609-0000 $2.55
FIBRE GLASS “ALIGNMENT STICKS”Popular, double end, thin alignment sticks, inexpensive, practical and long last-ing. Worn end can easily be sharpened with file or grinder.
Cat. No. Description Net Price
00-8728-0000 121⁄16˝ Alignment stick $3.3200-8729-0000 161⁄16˝ Alignment stick 3.3600-9293-0000 12˝ Alignment stick 3.51
G-C DELRIN HEX TOOL11˝ × .100 extra long to prevent hand capacity. .100˝ hex on both sides, one endundercut for tuning bottom slugs. Handle diameter 5⁄32˝ .
Cat. No. Description Net Price
00-9295-0000 Double End Delrin $3.38
G-C TV “X57 PLASTIC LONG SLIM” SCREWDRIVERSA non-metallic screw driver made of polyester-fiberglass for utmost durabilityand toughness. Worn ends can be re-ground and thin shaft diameter (1⁄8˝ )reaches most TV and radio adjustments.
Cat. No. Lgth. Blade Overall Lgth. Net Price
00-8987-0000 7˝ 91⁄2˝ $3.5300-8988-0000 12˝ 141⁄2˝ 5.10
G-C “THIN END” TV ALIGNERA plastic, metal tipped aligner with turned down shank to fit very small coil open-ings. Originally designed for Westinghouse—now used on many sets. Length53⁄4˝ .
Cat. No. Net Price
00-9089-0000 $2.55
G-C .125 HEX DELRIN DOUBLE END IR ON CORE TOOLAll Delrin hex tool made to fit cores with .125 hex opening. One end of toolundercut so it can reach the bottom slug in coils without turning the top slug.Supplied in 5˝ and 11˝ lengths.
Cat. No. Description Net Price
00-9091-0000 5˝ long hex tool $1.88
G-C 3 IN 1 HEX CORE ALIGNMENT TOOLFor adjusting coil slugs. This alignment tool is designed especially for use onMagnavox sets and is also useful on other sets. Both ends are hex shaped. Oneend is .075˝ with under cut shaft; the other end is .075˝ and .100˝ .
Cat. No. Description Net Price
00-9302-0000 3 In 1 Hex Tool $2.30
G-C DOUBLE END ALIGNMENT T OOLFor adjusting coil slugs. A new alignment tool the serviceman will need foradjusting coil slugs on Webcor and other sets. One end is .075˝ hex shapedwith an undercut shaft; the other end is a handy screwdriver tip.
Cat. No. Description Net Price
00-9304-0000 Double End Tool $2.30
G-C DELRIN HEX TOOL11˝ × .075 Hex, double end hex iron core tool. Makes it possible to turn both topand bottom coil slugs with one tool. One end under-cut for turning bottom slugseparately. Has knurled 1⁄4˝ handle.
Cat. No. Net Price
00-9296-0000 $2.99
G-C DELRIN HEX TOOL11˝ × .075 hex, double end hex iron core tool with 5⁄32˝ handle. One end undercutfor turning bottom slug separately. Will turn both top and bottom coil slugs.
Cat. No. Net Price
00-9297-0000 $3.45
1296 PARTS INDICATED WITH A LEAF lARE CONSIDERED RoHS JULY 2006 COMPLIANTBASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING.PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE T AXES NOT INCLUDED
GC Alignment ToolsMANU
CODE
169
G-C DOUBLE END HEX ALIGNMENT T OOLFor adjusting coil slugs. A general purpose alignment tool as well as a coil slugadjuster. Both ends are .075˝ hex, with one end undercut. A tool of many uses.
Cat. No. Description Net Price
00-9300-0000 Double End Hex Tool $2.15
TRANSISTOR I.F. COREALIGNMENT TOOL (DELRIN)
For Arvin, Regency, Silvertone and others. 115⁄32˝ × .121˝ dia. shaft, 9⁄32˝ × .062˝square head, .070˝ × .029˝ tip. 13⁄8˝ × .145˝ dia. shaft, 3⁄8˝ × .104˝ hex head,1⁄16˝ × .075˝ × .042˝ tip.
Cat. No. Net Price
00-9440-0000 $1.50
MINIATURE POTENTIOMETERTRIMMER ADJUSTMENT TOOL
Material: Nylon. Shaft: 1⁄4˝ (6.3 mm) dia., 415⁄16˝ (12.5 cm) long. Ends: .085˝ (2.2mm) wide steel tip; .085˝ (2.2 mm) wide steel tip, recessed .040˝ . Total Length:415⁄16˝ (12.5 cm).
Cat. No. Net Price
00-8608-0000 $2.63
G-C ALL-PURPOSE ALIGNMENT KITSelection of the most popular TV alignment tools and service aids, all in oneattractive, durable plastic case. Roll-up case stores easily in service kit. KITCONTAINS 1 EACH: 00-2520-0000 duplex aligner screwdriver, 00-5097-0000K-Tran tool, 00-8271-0000 core aligner, 00-8276-0000 duplex aligner, 00-8289-0000 “shorty” aligner, 00-8606-0000 hex wrench–5˝ , 00-8729-0000 screw-driver–16˝ , 00-8988-0000 screwdriver, 00-9050-000L Zenith alignment tool, 00-9088-0000 brush/forked tip tool, 00-9091-0000 hex wrench core tool,00-9297-0000 hex alignment tool.
Cat. No. Description Net Price
00-5040-0000 12 Top Tool Kit $29.22
DELUXE ALIGNMENT TOOL KITHandy roll type case of durable leatherette that contains the most frequentlyused alignment tools. Case has fold-over flap to prevent tools from becominglost. KIT CONTAINS 1 EACH: 00-2515-0000 K-Tran tool, 00-5066-0000 neutral-izing tool, 00-5080-0000 alignment wrench. 00-5097-0000 K-Tran tool, 00-8195-
0000 TV channel tuning tool, 00-8196-0000 TV-FM tuning tool, 00-8271-0000core aligner, 00-8273-0000 TV aligner, 00-8274-0000 long-reach aligner, 00-8275-0000 universal aligner, 00-8276-0000 duplex aligner, 00-8277-0000 shortyduplex aligner, 00-8279-0000 core aligner, 00-8282-0000 Zenith alignment tool,00-8606-0000 hex wrench–5˝ , 00-8608-0000 potentiometer adjustment tool.
Cat. No. Net Price
00-8280-0000 $37.48
G-C MASTER DELUXE TOOL KITDesigned for the electronic technician who likes a complete assortment of align-ment and adjustment tools. Includes tools used on mobile communication,marine, and amateur equipment. KIT CONTAINS 1 EACH: 00-5000-0000 align-ment screwdriver, 00-5004-0000 adjustment screwdriver, 00-5066-0000 neutral-izing tool, 00-5080-0000 alignment wrench, 00-5097-0000 K-Tran tool, 00-8195-0000 TV channel tuning tool, 00-8196-0000 TV-FM tuning tool, 00-8271-0000core aligner, 00-8273-0000 TV aligner, 00-8274-0000 long-reach aligner, 00-8275-0000 universal aligner, 00-8276-0000 duplex aligner, 00-8277-0000 shortyduplex aligner, 00-8279-0000 core aligner, 00-8282-0000 Zenith alignment tool,00-8289-0000 shorty aligner, 00-8290-0000 universal aligner, 00-8606-0000 hexwrench–5˝ , 00-8609-0000 alignment tool, 00-8721-0000 2-in-1 alignmenttool–9˝ , 00-8722-0000 2-in-1 alignment tool–7˝ , 00-8727-0000 alignment tool,00-8728-000A screwdriver–7˝ , 00-8867-0000 Tel-A-Turn tool, 00-9090-0000adjustable shorty tool.
Cat. No. Net Price
00-8283-0000 $58.37
CB ALIGNMENT TOOL KITCB alignment tool kit: a must for every CB owner or repairman—eight of thefinest made, precision tools, serving a multitude of purposes. For tuning I.F.transformers, RF coils, antennas and oscillator coils, plus countless other fine,intricate adjustments. KIT CONTAINS 1 EACH: 00-5009-0000 duplex no-metalscrewdriver, 00-5097-0000 K-Tran tool, 00-8271-0000 core aligner, 00-8276-0000 duplex aligner, 00-8282-0000 Zenith aligner tool, 00-9091-0000 hex ironcore tool, 00-9440-0000 transistor tool, 00-9304-0000 double end tool.
Cat. No. Net Price
18-0530-0000 $12.30
FLEXIBLE PICK-UP T OOLConvenient, mechanical fingers pick up pieces and parts dropped into inacces-sible places. Holds to start screws, nuts and bolts.
Cat. No. Description Net Price
12-0044-0000 5˝ Miniature Tool $5.24
1297PARTS INDICATED WITH A LEAF lARE CONSIDERED RoHS JULY 2006 COMPLIANTBASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING.PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE T AXES NOT INCLUDED
GC Alignment ToolsMANU
CODE
169
G-C COLOUR TV ALIGNMENT TOOL KITConsists of five alignment tools covering the majority of all alignment adjust-ments required in colour TV servicing. Provides eight hex ends which cover vir-tually all of the iron core transformer adjustments.
Cat. No. Net Price
00-8454-0000 $8.33
STANDARD TV ALIGNMENT TOOL KITMade ot last and wear—a quality kit with essential alignment tools in a roll typecase. KIT CONTAINS 1 EACH: 00-5004-0000 adjustment screwdriver, 00-5097-0000 K-Tran tool, 00-8195-0000 TV channel tuning tool, 00-8196-0000 TV-FMtuning tool, 00-8271-0000 core aligner, 00-8273-0000 TV aligner, 00-8274-0000long aligning tool, 00-8275-0000 universal aligner, 00-8276-0000 duplex aligner.
Cat. No. Net Price
00-8455-0000 $22.91
G-C INSPECTION MIRROR00-5090-0000: 7-1/2˝ long mirror. Metal shaft and plastic handle. N.S.N. 5120-00-620-9233. 00-590-000P: 7-7/8˝ long all plastic insulated mirror. No danger ofshock or shorting. N.S.N. 5120-00-159-8180.
Cat. No. Net Price
12-5090 $6.2700-5090-000P 6.24
G-C HEAT SINKA lightweight, first quality heat sink that allows a firm grip and provides protec-tion to transistors and diodes when soldering. Solder will not stick to heat sinkwhich is aluminum.
Cat. No. Description Net Price
00-9077-0001 Aluminum Heat Sink $1.38
ALIGNMENT AND SPECIAL TY KITComprehensive selection of the most popular alignment tools and service aids.Packaged in a handsome carrying case, designed to provide easy removal andreplacement of tools. Ideal for the technician and engineer who requires a widevariety of tools for every purpose. KIT CONTAINS 1 EACH: 12-0760-0000 wirestripper, 00-2520-0000 duplex aligner screwdriver, 00-5000-0000 alignmentscrewdriver, 00-5004-0000 adjustment screwdriver, 00-5028-0000 wrench kit,00-5090-0000 inspection mirror, 00-5091-0000 extension shaft, 00-5097-0000 K-Tran tool, 00-5101-0000 AC/DC test light, 00-7948-0000 tweezers, 00-8195-0000TV channel tuning tool, 00-8271-0000 core aligner, 00-8275-0000 universalaligner, 00-8276-0000 duplex aligner, 00-8277-0000 “shorty duplex aligner”, 00-8282-0000 Zenith alignment tool, 00-8605-0000 capacitor tool, 00-8606-0000hex wrench 5˝ , 00-8606-000L hex wrench 11˝ , 00-8721-0000 2-in-1 tool 9˝ , 00-8722-0000 2-in-1 tool 7˝ , 00-8728-0000 alignment tool 12˝ , 00-8728-000Ascrewdriver 7˝ , 00-8867-0000 Tel-A-Turn tool, 00-8868-0000 Tel-A-Turn tool, 00-8869-0000 Tel-A-Turn tool, 00-8868-0000 Tel-A-Turn tool, 00-8869-0000 Tel-A-Turn tool, 00-8885-0000 oiler, 00-8987-0000 screwdriver 9-1/2˝ , 00-9076-0000reamer/forked tip tool, 00-9077-0000 heat sink, 00-9091-0000 hex iron core tool5-3/32˝ , 00-9091-000L 11˝ hex tool, 00-9093-0000 solder probe, 00-9094-0000brush/scraper tool, 12-4614-0000 I.C. removal tool, 00-9293-0000 alignment tool12˝ , 00-9295-0000 Delrin hex tool 11˝ , 00-9296-0000 Delrin hex tool 11˝ , 00-9300-0000 hex core tool, 00-9302-0000 hex wrench, 00-9304-0000 double endtool, 00-9338-0000 burnishing tool, 00-9356-0000 fuse puller, 00-9440-0000transistor tool.
Cat. No. Net Price
00-5050-0000 $139.64
CERAMIC ADJUSTER SETSix sizes include Flat Blade .9, 1.3, 1.8, 2.6mm and Phillips 1.7 and 3.0mm.These adjusters are anti-static and nonmagnetic. Protective caps are includedto keep tips clean and contamination-free. Solder does not adhere to tip surface.Resists acids (except Hydrofluoric) and solder. Comfortable, smooth handlesand tips are 100% rustproof. Packaged in form-fitted storage tray.
Cat. No. Net Price
12-0577-0000 $42.54
CONTACT BURNISHING TOOLSGC burnishing tools consist of stainless steel strips, micro-scored to an ultra-finefile surface. They remove oxide and corrosion on relay and switch contact pointsmade of platinum, paladium, molydenum, gold tungsten, and silver. The stan-dard tool is used on medium and large contact points whereas the fineline tool isrecommended for use on small and miniature components.
Cat. No. Description Net Price
00-9337-0000 Fineline (0.120˝ wide) $1.8600-9338-0000 Standard width (1⁄4˝ ) 1.86
1298 PARTS INDICATED WITH A LEAF lARE CONSIDERED RoHS JULY 2006 COMPLIANTBASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING.PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE T AXES NOT INCLUDED
GC Service AidsMANU
CODE
169
“LUCKY 13” GENERAL PURPOSE ALIGNMENT T OOL KITFor TV sets, AM/FM radios and CB equipment. KIT CONTAINS 1 EACH: 00-2512-0000 wire dressing tool, 00-2515-0000 K-Tran tool, 00-2520-0000 duplexaligner, 00-8282-0000 Zenith alignment tool, 00-8289-0000 shorty aligner, 00-8279-0000 2-in-1 alignment tool 7˝ , 00-8867-0000 Tel-A-Turn tool, 00-8868-0000Tel-A-Turn tool, 00-8869-0000 Tel-A-Turn tool, 00-8885-0000 oiler, 00-9051-0000Zenith-RCA alignment tool, 00-9088-0000 brush/forker tip tool, 00-9191-0000screwdriver 7˝ .
Cat. No. Net Price
00-0582-0000 $37.49
WIRE STRIPPER KITSWire stripper with 3 different size blade sets packaged in a special plastic con-tainer. Includes blades for 14 to 30 gauge wire, 18 POSJ and 300 ohm wire.
Cat. No. Description Net Price
00-0766-000K Speed-O-Matic stripper Kit $54.88
IDC CRIMP TOOLFor crimping many styles of I.D.C. connectors onto flat cable (A.K.A. ribboncable). Works with card edge connectors, D-Sub, Centronics style and others. Agood tool for the custom cable maker.
Cat. No. Net Price
12-0463-0000 $28.96
CRIMPING TOOLFOR “F” CONNECT ORS
Makes an excellent hex crimp in all “F-Type” and BNC connectors.
Cat. No. Net Price
12-0455-0000 $28.76
PROFESSIONAL RATCHETING CRIMP TOOLFEATURES: Heavy duty steel construction. Compound leverage for ease ofoperation. Wide selection of interchangeable dies. Dies are marked with appli-cation. Crimp pressure adjustment. Ergonomic handle design for comfortableextended use. Ratcheting design insures positive exacting crimps. Crimprelease for operator safety.
Cat. No. Description Net Price
12-9021-0000 RG-59, RG-6 F-Type CATV Connectors $39.92
G-C HEAVY DUTY SPEED-O-MATIC WIRE STRIPPERThe latest model featuring the fully automatic delayed return action to preventcrushing fine wires. Combines the best features of all of the Speedex wire strip-pers including narrow, easy grip handles and interchangeable blades.
Cat. No. For Wire Size Net Price
00-0766-0000 12 to 20 $32.8900-0766-000A 14 to 30 32.8900-0766-000B 10 to 18 32.8900-0766-000C RG-58, RG-59 & RG-62 Coax Cable 32.8900-0766-000I 8 to 22 32.89
KWIK-STRIP COAX STRIPPERIdeal for use in the field. Cuts and strips RG-58/U or RG-59/U coaxial cables inquick clean steps. Toggle latch keeps stripper closed. 31⁄4˝ × 21⁄8˝ × 11⁄4˝ . Weighsonly 2.6 oz.
Cat. No. Description Net Price
12-0164-0000 Stripper $35.5012-0165-0000 Replacement Blade Set 2.55
POCKET HEX KEY WRENCH SETWrenches open like pocket knife blades. Six popular size wrenches: 0.50˝ to3⁄16˝ , fitted in steel case. Made of the finest nickel chrome alloy steel.
Cat. No. Net Price
00-9124-0000 $4.76
1299PARTS INDICATED WITH A LEAF lARE CONSIDERED RoHS JULY 2006 COMPLIANTBASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING.PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE T AXES NOT INCLUDED
JONARD SPRING HOOKSUsed for inserting, removing, and adjusting fine springs and other small parts intight areas. Indispensable for precision work in production and maintenance ofprecision production, electronics, electromechanics, and even maintenancejobs. All spring hooks are tapered to a fine point. Produced of the finest qualityhigh carbon steel with a nickel plated finish.
M-120
M-125
M-130/SXP
M-145
Cat. No. Description Net Price
M-120 Pull hook with looped handle for maximum control.Length: 6˝ .
$4.05
M-125 Push hook with looped handle for maximumcontrol. Length: 6˝ .
4.05
M-130/SXP Pull hook and lifter with a knurled grip. Length: 8˝ . 4.49M-145 Captive spring hook. Spring loaded hook is
exposed by depressing plunger on top of tool.Internal spring retracts hook automatically. Thishook is ideal for capturing small wires, springs, orparts and holding them. Length: 7˝ .
13.59
JONARD CLIP SETTERClip Setter used for setting and withdrawing 1.5mm and up E and C clips. Oneend of this tool has a hook with leaf spring tension for removing the clip. Otherend of tool has leaf spring for holding clip in position to insert. Narrow shapeallows access to confined places. This tool is 6-3/4˝ long .275˝ wide and 1/16˝thick.
Cat. No. Net Price
CS-1022 $18.21
JONARD ALIGNMENT T OOL KITThis 5 piece pocket kit contains a selection of the most popular non-conductivetools for aligning and adjusting components. Supplied in an easy to carry vial.
Cat. No. Description Net Price
TK-AT5 Kit Contains: Trimpot, alignment 2 in 1 tool,spudger, orange stick, and probe pick.
$8.35
Jonard Alignment & Telecom Tools MANU
CODE
328
JONARD CONNECTOR-CRIMPING PLIERSWITH SIDE CUTTERS
Designed to press UG, UR, and UY connectors. A special stop behind cut outprevents damage to connectors. Utilized on combinations of plastic and pulpinsulated 19, 22, 24, and 26 gauge copper conductors as well as 20 gauge plas-tic insulated copper steel wire. The cushioned grip handles are yellow plasticdipped. Length: 6˝ .
Cat. No. Net Price
JIC-891 $19.20
JONARD LINEMAN’S B SIDE CUT PLIERSDesigned for heavy duty use in construction and maintenance work. These pli-ers are high leverage for cutting bolts, nails, and many gauges of wire includinghigh-strength wire. Cutting edges cut clean and remain sharp. The cushionedgrip, comfortable handles are red plastic dipped. Approx. length: 9˝ long.
Cat. No. Net Price
JIC-683 $20.51
JONARD TELECOM LONG NOSE PLIERSLong nose have side cutting blades, a crushing slot, one .030˝ stripping hole,and a thin knurled nose to facilitate handling of the wire at the terminals. Thecomfortable handles are yellow plastic dipped. Length: 7˝ .
Cat. No. Net Price
JIC-21257 $31.05
JONARD TELECOM LONG NOSE D PLIERSPliers are for general use looping, bending, and cutting. Grips small wires andparts and reaches into tight spaces. Jaws are knurled, serrated, and have sidecutting blades. Cushion gripped yellow plastic handles. Length: 7˝ .
Cat. No. Net Price
JIC-842 $20.20
1386 PARTS INDICATED WITH A LEAF lARE CONSIDERED RoHS JULY 2006 COMPLIANTBASED ON THE MANUFACTURER’S CONFIRMATION AT THE TIME OF PUBLISHING.PRICES SUBJECT TO CHANGE WITHOUT NOTICE, APPLICABLE T AXES NOT INCLUDED
