alid · alid Toll Free Phone: 888-632-6477 Phone: 250-832-6477 Fax: 250-832-7746 E-mail:...
Transcript of alid · alid Toll Free Phone: 888-632-6477 Phone: 250-832-6477 Fax: 250-832-7746 E-mail:...
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone: 250-832-6477Fax: 250-832-7746E-mail: [email protected]
PART NUMBER MAIN BREAKER PHASE VOLTAGEBCH-400-1-240 400A 1 120/240V
BCH-600-1-240 600A 1 120/240V
BCH-800-1-240 800A 1 120/240V
BCH-400-3-208 400A 3 120/208V
BCH-600-3-208 600A 3 120/208V
BCH-800-3-208 800A 3 120/208V
BCH-400-3-600 400A 3 347/600V
BCH-600-3-600 600A 3 347/600V
BCH-800-3-600 800A 3 347/600V
BCH-1000-3-600* 1000A 3 347/600V
BCH-1200-3-600* 1200A 3 347/600V
BCH-1600-3-600* 1600A 3 347/600V
19912-17991
BC HYDRO METERING KIOSKBCHMetering kiosk built to BC Hydro distribution standards. Used for applications where secondary services are installed in weatherproof kiosks outside of a main facility.
Features/Specification:
• Marine grade aluminum construction• CSA Type 3R rated• Padmount design• Double roof design for solar shielding• Padlockable stainless steel 3-point handle• Hinged doors with pour in place gasket• Hidden hinges for additional security• Gas shock door stays• Removable lifting ears• Viewing window on door (Models up to 800A)• PC101(ANSI61)Greypowdercoatfinish• Service entrance rated main breaker• Utility approved CT enclosure• Compliant with BCH metering standards• Complete factory wiring for line & load lugs• *Models above 800A have external meter bases and bussed CT section
Options:
• Custom powder coat colours• Stainless steel construction• Door switch, light, thermostat, heater, fan• Insulation• Convenience receptacle• Additionalsizesandconfigurations
alid
www.validmanufacturing.com
Toll Free Phone: 888-632-6477
Phone 250-832-6477
Fax: 250-832-7746
E-mail: [email protected]
CTC
CURRENT TRANSFORMER CABINETS
Features/Speciications
• Galvanized steel or aluminum construction• CSA Type 1 rated• Designed to BC Hydro distribution standards• Screw on cover• Sealing screws• Backpan• Internal mounting holes
CT cabinets are used to meter single phase and three phase services where the CT’s are not included within the meter base. These boxes are manufactured with either galvanized steel or aluminum and come with seal-ing screws, backpan for mounting CT’s and internal mounting holes.
H
W
FRONT VIEW(COVER REMOVED)
D
SIDE VIEW
PART NUMBER HEIGHT WIDTH DEPTH MATERIAL SINGLE PHASE
SERVICE
THREE PHASE
SERVICE
CTCG30-16-8 30” 16” 8” GALVANIZED STEEL UP TO 400A UP TO 400A & BELOW 300V
CTCA30-16-8 30” 16” 8” ALUMINUM UP TO 400A UP TO 400A & BELOW 300V
CTCG42-18-16 42” 18” 16” GALVANIZED STEEL OVER 400A OVER 400A TO 800A
CTCA42-18-16 42” 18” 16” ALUMINUM OVER 400A OVER 400A TO 800A
CTCG42-36-24 42” 36” 24” GALVANIZED STEEL NOT USED OVER 800A
CTCA42-36-24 42” 36” 24” ALUMINUM NOT USED OVER 800A
19910-18991
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone: 250-832-6477Fax: 250-832-7746E-mail: [email protected]
FDC
Farm Distribution Center
Features/Specifications:
• Steelconstruction• CSAType3Rrated• Padlockable3-pointhandle• Serviceentranceratedmainbreakerwithlockoff• Groundbarwithlugsforgroundingcircuits• UtilityapprovedCTEnclosure• Completefactorywiringtoline&loadterminationlugs• Louverswithbugscreen• Padmountdesign• Removableliftingears• PC101Greypowdercoatfinish
OptionalFeatures:
• MainLugsOnlybreakerpanel• Sub-breakersasrequired• Meterbase• Heater&thermostat• Custompowdercoatcolours
TheFDCFarmDistributionCenterisafreestanding,allencompassing,padmountenclosureapprovedforusebylocalpowerutilityandusedprimarilyforpowerdistributioninfarms.Factorywiredsecondarylugsenableeaseofmultiplecableconnectionsforlargersizedwires.Theweatherproofdesignisidealforoutdooruse.StandardPC101Greypowdercoatpaintprovidesadurablefinish.
19902-16991
PART NUMBER AMP PHASE VOLTAGE HEIGHT WIDTH DEPTHFDC4 400 1 120/240 79” 66” 20”FDC6 600 1 120/240 79” 66” 20”FDC8 800 1 120/240 86” 72” 20”FDC10 1000 1 120/240 86” 86” 20”FDC4-3 400 3 347/600* 86” 86” 20”FDC6-3 600 3 347/600* 86” 86” 20”FDC8-3 800 3 347/600* 86” 86” 20”FDC10-3 1000 3 347/600* 86” 86” 20”
*Alsoapprovedforusewith120/208V
PART NUMBER AMP PHASE VOLTAGE HEIGHT WIDTH DEPTHFDC4-B 400 1 120/240 79” 66” 20”FDC6-B 600 1 120/240 79” 66” 20”FDC8-B 800 1 120/240 86” 72” 20”FDC10-B 1000 1 120/240 86” 86” 20”FDC4-3-B 400 3 347/600* 86” 86” 20”FDC6-3-B 600 3 347/600* 86” 86” 20”FDC8-3-B 800 3 347/600* 86” 86” 20”FDC10-3-B 1000 3 347/600* 86” 86” 20”
*Alsoapprovedforusewith120/208V
BUSSING OPTION - PRE-DRILLED AND TAPPED BUS CONNECTION FOR CT’S
alid
www.validmanufacturing.comToll Free Phone: 888-632-6477Phone: 250-832-6477Fax: 250-832-7746E-mail: [email protected]
FDC
Farm Distribution Center
TypicalFDC6Configuration
TypicalFDC6withMLOBreakerPanelOption
MLOPANEL120/240V600A CTCABINET
LOADFEEDERWIREWAY
MAINFEEDERWIREWAY
SN600
SN600
WIRESUPPORT
GROUNDBAR
WIRESUPPORT
SN600SN600
MAINFEEDERWIREWAY
LOADFEEDERWIREWAY
GROUNDBAR
WIRESUPPORT WIRESUPPORT
CTCABINET
19902-16991
alid
www.validmanufacturing.com
Toll Free Phone: 888-632-6477
Phone: 250-832-6477
Fax: 250-832-7746
E-mail: [email protected]
Features/Speciications:
• Galvanized steel construction• CSA Type 3R rated• Service entrance rated• Direct burial design• 4-Jaw meter socket• Line lugs rated for (1) 4AWG-600MCM or
(2) 1/0 AWG-250MCM (400A only)• Ground lug• 28” ground stakes• Complies to Fortis BC distribution standards• PC101 Grey powder coat inish
Optional Items:
• Custom powder coat colours
PART NUMBER AMPSABOVE GRADE
HEIGHT
TOTAL
HEIGHTWIDTH DEPTH
FMP-DB-200 200 68” 108” 12” 5 1/2”FMP-DB-400 400 75” 114” 26” 6”
FMP-DB-200
200A & 400A DIRECT BURIAL METERING PEDESTAL
19909-18991
FMP-DB
FMP-DB-400
alid
www.validmanufacturing.comwww.validmanufacturing.comToll Free Phone: 888-632-6477Toll Free Phone: 888-632-6477Phone: 250-832-6477Phone: 250-832-6477Fax: 250-832-7746Fax: 250-832-7746E-mail: [email protected]: [email protected]
SMC
Metered Service Center
Features/Specifications
• Steel construction• CSA Type 3R rated• Back to back design• Padlockable 3-point handle• Service entrance rated main breaker with lock off• Ground bar• Utility approved CT Enclosure• CT section pre-drilled and tapped• Fully bussed assembly• Louvers with bug screen• Padmount design• Removable lifting ears• PC101 Grey powder coat finish
Optional Features
• Meter base• Distribution panel• Custom powder coat colours
The SMC Metered Service Centre provides a compact footprint with a free-standing back to back design approved for use by Sask Power. The consumer section provides ample room for connecting loads to the busbars. The fully bussed unit enables ease of installation for both the utility and customer.
19905-20991
SMC8-3 SHOWN WITH INNER COVERS REMOVED
UTILITY SEALED TERMINATION
SECTION
UTILITY SEALED BREAKER SECTION
UTILITY SEALED CT/PT
SECTION
CONSUMER TERMINATION
SECTION
PART NUMBER AMP PHASE VOLTAGE HEIGHT WIDTH DEPTHSMC4 400 1 120/240 66” 36” 30”SMC6 600 1 120/240 66” 36” 30”SMC8 800 1 120/240 74” 48” 30”SMC10 1000 1 120/240 74” 48” 30”SMC4-3 400 3 347/600* 66” 36” 30”SMC6-3 600 3 347/600* 66” 36” 30”SMC8-3 800 3 347/600* 74” 48” 30”SMC10-3 1000 3 347/600* 74” 48” 30”
* Also approved for use with 120/208V
alid
www.validmanufacturing.comwww.validmanufacturing.comToll Free Phone: 888-632-6477Toll Free Phone: 888-632-6477Phone: 250-832-6477Phone: 250-832-6477Fax: 250-832-7746Fax: 250-832-7746E-mail: [email protected]: [email protected]
SPC
SASK POWER SERVICE TERMINATION ENCLOSURE
19903-20991
Features/Specifications
• Steel construction• Louvers and door stay• CSA Type 3R rated• Tin plated aluminum bus bars with spacing for CT’s• 600V rated• Padlockable stainless steel 3-point handle• Powder coated PC101 Grey• Neutral and ground bars with bonding strap• Per figure 2-5 and 2.6 of Sask Power Electrical Metering
Requirements
For dedicated service up to 600A Sask Power is allowing a combination service termination/CT enclosure. This family of enclosures exceeds the requirements as set out in the November 2017 Electrical Service Requirements
PART NUMBER DESCRIPTION DIMENSIONSH W D
SPC1-400 400A SINGLE PHASE 30” 30” 10”
SPC1-600 600A SINGLE PHASE 40” 36” 12”
SPC3-400 400A THREE PHASE 30” 30” 10”
SPC3-600 600A THREE PHASE 40” 36” 12”
SPC1-400 SPC1-600 SPC3-400 SPC3-600