Alex Mabrich, PE, MSc Bridge Product Specialist Generating Construction Drawings from RM Bridge.
-
Upload
morgan-davidson -
Category
Documents
-
view
217 -
download
0
Transcript of Alex Mabrich, PE, MSc Bridge Product Specialist Generating Construction Drawings from RM Bridge.
Alex Mabrich, PE, MSc Bridge Product Specialist
Generating Construction Drawings from RM
Bridge
2 | WWW.BENTLEY.COM
ONE WAY EXPORT
EXPORT ANY TIME
Geometry Definition Any Type of Analysis
Axis. Cross Sections. Structural Units (Segments). Preparation for Design Checks:
Stress Points
Temperature Points
Perimeter…
Stage by stage
Non-linear… Tendon definition. Loading preparation. Load Combinations. Construction Sequence. Analysis. Design Code Checks:
Fibre Stress
Ultimate Capacity
Shear Capacity…
Superstructure
Substructure
GENERAL OVERVIEW
3 | WWW.BENTLEY.COM
GENERAL APPROACH
– Definition of axis reflecting the position of a structure in 3D
– Definition of cross-sections
– Definition of segments by distributing cross-sections along the axis
– Assignment of tables and formulas to vary dimensions over the length of the structure
– Preparation of Reference points for design checks
– Preparation of shapes for the geometry of tendons
Geometrical Pre-Processor
4 | WWW.BENTLEY.COM
GP DEFINITIONS
1.Axis:
2.Cross Section
Elevation: straight lines, arcs & parabolas.
Plan View: straight lines, arcs & spirals.
Distance measured along axis = station.
Combination of plan view & elevation view = 3D position of axis.
The intersection of the Construction lines are used to compose plane elements, which define the Finite Element CS.
Construction lines are basis of CS.
FE element mesh.
Variables: e.g. height variation.
Parts: e.g. composite, grillage…
Axis
Bridge
1 1 1 1 11 11
22
22
22
2 2
1 1 1 1 1 11 1
1 1
1 1 1 1Part numbers
Segment points
5 | WWW.BENTLEY.COM
GP DEFINITIONS 3.Formulas & Tables
4.Segment
Axis CS Tables Segment
Part of the system prepared to be exported to RM: Components are identified and logically grouped together.
Consists of segment points.
Assignment of CS to seg. Points.
Definition of beam elements & nodes.
Master segment: related to axis.
Slave segment: depending on geometry & position in other segments.
Bridge girders.
Piers.
Cross Beams.
Cables.
Slave reference line
Segment points
Adapt the Cross Section variables along the axis.
Types:
6 | WWW.BENTLEY.COM
– Definitions in Plan View using straight lines, arcs and spirals
Axis – Plan View
30
.000
0.0
00
95
.000
14
0.00
0
80
.000
15
.000
x
z
7 | WWW.BENTLEY.COM
AXIS DEFINITON
– Definition in Elevation using straight lines, arcs and parabolas
Axis – Elevation
0.
000
20.0
00
65.0
00
140
.000
0.115
- 0.320
8 | WWW.BENTLEY.COM
AXIS DEFINITON
– Combination of plan view & elevation view = 3D position of axis
– All distances are measured along the axis defined in plan view
Axis – 3D
Axis
Bridge structure
xz
y
9 | WWW.BENTLEY.COM
SEGMENTS
– A Segment is a part of a structure prepared for the export to RM2006– Components are identified and logically grouped together
Axis CS Segment
Axis
– Discretisation of the structure along the defined axis → “Segment points”
Plan View
10 | WWW.BENTLEY.COM
11 | WWW.BENTLEY.COM
GP to RM
• Transfer Geometry to Analysis Module
• Geometry gets transformed to an Structural Model
• Design Calculations performed in RM
• Creation of the BrIM folder
12 | WWW.BENTLEY.COM
13 | WWW.BENTLEY.COM
What is Generated?
• A BrIM folder in your working directory
• Geometry data
• Design Information
• 2D Drawings
• 3D models : Bridge and DTM
14 | WWW.BENTLEY.COM
BrIM Folder• General Layout
– 3D DTM– 3D Model– 3D Tendon– Alignment
• Axes– Horizontal Alignment– Vertical Alignment– Elevation view
• Deck– Typical Sections– Segment Sections
• Construction– Structural Model
• Shop Drawings– Individual Segment Sections
15 | WWW.BENTLEY.COM
General Layout
• 3D DTM: bridge in 3D
• 3D Model : 3d model including the structural nodes used.
• 3D Tendon: tendon layout
• Alignment: 2D alignment data
16 | WWW.BENTLEY.COM
Axes
• Horizontal Alignment: 2D alignment with table of geometric elements.
• Vertical Alignment: 2D alignment and profile tables.
• Elevation view: 2D profile and table of geometric elements.
17 | WWW.BENTLEY.COM
Deck
• Typical Sections: structural segments in which the bridge was divided.
• Segment Sections: typical cross sections of the segments used. Segments in tabular format.
18 | WWW.BENTLEY.COM
Construction
• Structural Model: structural model used, nodes, segments, abutments and piers.
19 | WWW.BENTLEY.COM
Shop Drawings
• Individual Segment sections: segments design data in 2D and 3D. Segment steel reinforcement.
20 | WWW.BENTLEY.COM
CADD Standards
• Based on a “seed” dgn file” Template.dgn
• In the future, we will specify label symbology of the structural elements, fonts and text size for labeling, scales to use.
21 | WWW.BENTLEY.COM
Alex Mabrich, PE, MSc Bridge Product Specialist
Generating Construction Drawings from RM Bridge
Thanks for your attention !